Variations in size-specific effective dose with patient stature and beam width for kV cone beam CT imaging in radiotherapy

The facilities now available on linear accelerators for external beam radiotherapy enable radiation fields to be conformed to the shapes of tumours with a high level of precision. However, in order for the treatment delivered to take advantage of this, the patient must be positioned on the couch with the same degree of accuracy. Kilovoltage cone beam computed tomography systems are now incorporated into radiotherapy linear accelerators to allow imaging to be performed at the time of treatment, and image-guided radiation therapy is now standard in most radiotherapy departments throughout the world. However, because doses from imaging are much lower than therapy doses, less effort has been put into optimising radiological protection of imaging protocols. Standard imaging protocols supplied by the equipment vendor are often used with little adaptation to the stature of individual patients, and exposure factors and field sizes are frequently larger than necessary. In this study, the impact of using standard protocols for imaging anatomical phantoms of varying size from a library of 193 adult phantoms has been evaluated. Monte Carlo simulations were used to calculate doses for organs and tissues for each phantom, and results combined in terms of size-specific effective dose (SED). Values of SED from pelvic scans ranged from 11 mSv to 22 mSv for male phantoms and 8 mSv to 18 mSv for female phantoms, and for chest scans from 3.8 mSv to 7.6 mSv for male phantoms and 4.6 mSv to 9.5 mSv for female phantoms. Analysis of the results showed that if the same exposure parameters and field sizes are used, a person who is 5 cm shorter will receive a size SED that is 3%-10% greater, while a person who is 10 kg lighter will receive a dose that is 10%-14% greater compared with the average size.

Improving linac integrated cone beam computed tomography image quality using tube current modulation

PURPOSE

Linac integrated cone beam CT (CBCT) scanners have become widespread tool for image guidance in radiotherapy. The current implementation uses constant imaging fluence across all the projection angles, which leads to anisotropic noise properties and suboptimal image quality for noncircular symmetric objects. Tube current modulation (TCM) is widely used in conventional CT. The purpose of this work was to implement TCM on a linac integrated CBCT scanner and evaluate its impact on image quality under varying scatter conditions and scatter correction strategies.

METHODS

We have implemented TCM on a nonclinical Elekta Versa HD linear accelerator with enhanced x-ray generator functionality including pulse width modulation. The pulse width was modulated using two Arduino programmable microcontrollers: one placed on the kV arm to measure the projection angle and the other connected to the kV generator control board to vary x-ray pulse width as function of gantry angle and precalculated transmission. An in-house developed phantom with a ratio of the left-right to anterior-posterior path length of 1.85:1 was scanned. Image quality was determined using the anisotropicity of the 2D noise power spectra (NPS) in the transverse plane and the contrast-to-noise ratio (CNR). In addition, to determine the impact of scatter on the applicability of the TCM method we have modified the generated scatter using three different collimators in the cranio-caudal direction as well as with and without an antiscatter grid (ASG).

RESULTS

Application of the TCM led to 30-78% reduction of the angular anisotropicity of the NPS in the transverse plane. The amount of reduction depended on the scatter conditions, with lower values corresponding to higher scatter conditions. The same was true for the CNR: when scatter contribution was low (presence of an ASG or very aggressive collimation) the CNR was improved by about 30%, while in high scatter conditions the CNR was improved by about 12%.

CONCLUSIONS

TCM has the potential to improve CBCT image quality, but this depends on the amount of detected x-ray scatter.

A Monte Carlo study of organ and effective doses of cone beam computed tomography (CBCT) scans in radiotherapy

Cone-beam CT (CBCT) scans utilised for image guided radiation therapy (IGRT) procedures have become an essential part of radiotherapy. The aim of this study was to assess organ and effective doses resulting from new CBCT scan protocols (head, thorax, and pelvis) released with a software upgrade of the kV on-board-imager (OBI) system. Organ and effective doses for protocols of the new software (V2.5) and a previous version (V1.6) were assessed using Monte Carlo (MC) simulations for the International Commission on Radiological Protection (ICRP) adult male and female reference computational phantoms. The number of projections and the mAs values were increased and the size of the scan field was extended in the new protocols. Influence of these changes on organ and effective doses of the scans was investigated. The OBI system was modelled in EGSnrc/BEAMnrc, and organ doses were estimated using EGSnrc/DOSXYZnrc. The MC model was benchmarked against experimental measurements. Organ doses resulting from the V2.5 protocols were higher than those of V1.6 for organs that were partially or fully inside the scans fields, and increased by (3-13)%, (10-77)%, and (13-21)% for the head, thorax, and pelvis protocols for both phantoms, respectively. As a result, effective doses rose by 14%, 17%, and 16% for the male phantom, and 13%, 18%, and 17% for the female phantom for the three scan protocols, respectively. The scan field extension for the V2.5 protocols contributed significantly in the dose increases, especially for organs that were partially irradiated such as the thyroid in head and thorax scans and colon in the pelvic scan. The contribution of the mAs values and projection numbers was minimal in the dose increases, up to 2.5%. The field size extension plays a major role in improving the treatment output by including more markers in the field of view to match between CBCT and CT images and hence setting up the patient precisely. Therefore, a trade-off between the risk and benefits of CBCT scans should be considered, and the dose increases should be monitored. Several recommendations have been made for optimisation of the patient dose involved for IGRT procedures.

Optimal dose reduction algorithm using an attenuation-based tube current modulation method for cone-beam CT imaging

To reduce the radiation dose given to patients, a tube current modulation (TCM) method has been widely used in diagnostic CT systems. However, the TCM method has not yet been applied to a kV-CBCT system on a LINAC machine. The purpose of this study is to investigate if a TCM method would be desirable in a kV-CBCT system for image-guided radiation therapy (IGRT) or not. We have developed an attenuation–based TCM method using prior knowledge from planning CT images of patients. The TCM method can provide optimized dose reductions without degrading image quality for kV-CBCT imaging. Here, we investigate whether or not our suggested TCM method is desirable to use in kV-CBCT systems to confirm and revise the exact position of a patient for IGRT. Patients go through diagnostic CT scans for RT planning; therefore, using information from prior CT images can enable estimations of the total X-ray attenuation through a patient’s body in a CBCT setting for radiation treatment. Having this planning CT image allows to use the proposed TCM method in RT. The proposed TCM method provides a minimal amount of current for each projection, as well as total current, required to reconstruct the current modulated CBCT image with an image quality similar to that of CBCT. After applying a calculated TCM current for each projection, projection images were acquired and the current modulated CBCT image was reconstructed using a FDK algorithm. To validate the proposed approach, we used a numerical XCAT phantom and a real ATOM phantom and evaluated the performance of the proposed method via visual and quantitative image quality metrics. The organ dose due to imaging radiation was calculated in both cases and compared using the GATE simulation toolkit. As shown in the quantitative evaluation, normalized noise and SSIM values of the TCM were similar to those of conventional CBCT images. In addition, the proposed TCM method yielded comparable image quality to that of conventional CBCT images for both simulations and experimental studies as organ doses were decreased. We have successfully demonstrated the feasibility and dosimetric merit of a prototypical TCM method for kV-CBCT via simulations and experimental study. The results indicate that the proposed TCM method and overall framework can be a viable option for CBCT imaging that utilizes an optimal dose reduction without degrading image quality. Thus, this method reduces the probability for side effects due to radiation exposure.

Dual-rotation C-arm cone-beam computed tomography to increase low-contrast detection

PURPOSE

This paper investigates the capabilities of a dual-rotation C-arm cone-beam computed tomography (CBCT) framework to improve non-contrast-enhanced low-contrast detection for full volume or volume-of-interest (VOI) brain imaging.

METHOD

The idea is to associate two C-arm short-scan rotational acquisitions (spins): one over the full detector field of view (FOV) at low dose, and one collimated to deliver a higher dose to the central densest parts of the head. The angular sampling performed by each spin is allowed to vary in terms of number of views and angular positions. Collimated data is truncated and does not contain measurement of the incoming X-ray intensities in air (air calibration). When targeting full volume reconstruction, the method is intended to act as a virtual bow-tie. When targeting VOI imaging, the method is intended to provide the minimum full detector FOV data that sufficiently corrects for truncation artifacts. A single dedicated iterative algorithm is described that handles all proposed sampling configurations despite truncation and absence of air calibration.

RESULTS

Full volume reconstruction of dual-rotation simulations and phantom acquisitions are shown to have increased low-contrast detection for less dose, with respect to a single-rotation acquisition. High CNR values were obtained on 1% inserts of the Catphan® 515 module in 0.94 mm thick slices. Image quality for VOI imaging was preserved from truncation artifacts even with less than 10 non-truncated views, without using the sparsity a priori common to such context.

CONCLUSION

A flexible dual-rotation acquisition and reconstruction framework is proposed that has the potential to improve low-contrast detection in clinical C-arm brain soft-tissue imaging.