The forward production of high-energy electrons from megavoltage photon beams

Characterization of electron contamination in megavoltage photon beams

The purpose of the present study is to characterize electron contamination in photon beams in different clinical situations. Variations with field size, beam modifier (tray, shaping block) and source-surface distance (SSD) were studied. Percentage depth dose measurements with and without a purging magnet and replacing the air by helium were performed to identify the two electron sources that are clearly differentiated: air and treatment head. Previous analytical methods were used to fit the measured data, exploring the validity of these models. Electrons generated in the treatment head are more energetic and more important for larger field sizes, shorter SSD, and greater depths. This difference is much more noticeable for the 18 MV beam than for the 6 MV beam. If a tray is used as beam modifier, electron contamination increases, but the energy of these electrons is similar to that of electrons coming from the treatment head. Electron contamination could be fitted to a modified exponential curve. For machine modeling in a treatment planning system, setting SSD at 90 cm for input data could reduce errors for most isocentric treatments, because they will be delivered for SSD ranging from 80 to 100 cm. For very small field sizes, air-generated electrons must be considered independently, because of their different energetic spectrum and dosimetric influence.

An empirical model for megavoltage x-ray output factors

An empirical model of the factors that determine the central axis dose at 10 cm depth in water for 4 MV, 6 MV and 18 MV photon beams is presented. Backscattering from the variable collimators into the dose monitoring ionization chamber can cause a variation of -0.5% to +1.8% in the dose per monitor unit in accelerators with an electron facility. Forward emission towards the isocentre from the beam flattening filter and upper collimators is more dependent on the position of the upper variable collimator blades than the lower blades, so that they are not interchangeable in determining output factors, which can differ by up to 2%. The model includes the product of the monitor backscatter factor, normalized phantom scatter factor, normalized head scatter factor and inverse square law, corrected for the displacement of the virtual x-ray focus from the target. It can predict the dose to -/+0.83% for 4 MV, -/+0.80% for 6 MV photons and -/+0.82% for 18 MV photons. The normalized head scatter factor is a second-order polynomial of the modified equivalent square collimator, whose coefficients do not vary significantly with x-ray energy. The model was tested by comparison with independent measurements of output factor and generally agreed to around 1%.

Study of dose perturbation parameters for eye shielding in megavoltage photon beam therapy

Shielding blocks are frequently used to minimize dose and shield sensitive organs in radiation therapy. The blocks, which are made of high atomic number materials, produce significant dose perturbations in megavoltage photon beams. The effects of these perturbations are studied with special interest in the eye shielding in the treatment of head and neck malignancies. Optimum parameters for the treatment are suggested.