A translational couch technique for total body irradiation

Validation of Acuros for total body irradiation at extended distance

PURPOSE

Standardized and accurately reported doses are essential in conventional total body irradiation (TBI), especially lung doses. This study evaluates the accuracy of the Acuros algorithm in predicting doses for extended-distance TBI.

METHODS

Measurements and calculations were done with both 6 and 18 MV. Tissue Maximum Ratio (TMR), output and off axis ratios (OAR) were measured at 200 and 500 cm source to detector distance and compared to Acuros calculated values. Two end-to-end tests were carried out, one with an in-house phantom (solid water and Styrofoam) with inserted ion chambers and the other was with the Imaging and Radiation Oncology Core (IROC) TBI anthropomorphic phantom equipped with TLDs. The end-to-end test was done for 6 and 18 MV both with and without lung blocks. The source to midplane distance for both phantoms were at 518 and 508 cm respectively. Lung blocks were placed at the phantom surface and a beam spoiler was positioned 30 cm from the surface of the phantoms as per our clinical set up.

RESULTS

The agreement between measured and calculated TMR, output and off axis ratios for both 6 and 18 MV were within 2%. Ion chamber measurements in both the Styrofoam and solid water for both energies carried out with and without lung blocks were within 2% of calculated values. TLD measured doses for both 6 and 18 MV in the IROC phantom were within 5% of calculated doses which is within the uncertainty of the TLD measurement.

CONCLUSIONS

The results indicate that the clinical beam model for Acuros 16.1 commissioned at standard clinical distances is capable of calculating doses accurately at extended distances up to 500 cm.

Global research trends in Total Body Irradiation: a bibliometric analysis

Objectives

This manuscript presents a bibliometric and visualization analysis of Total Body Irradiation (TBI) research, aiming to elucidate trends, gaps, and future directions in the field. This study aims to provide a comprehensive overview of the global research landscape of TBI, highlighting its key contributions, evolving trends, and potential areas for future exploration.

Methods

The data for this study were extracted from the Web of Science Core Collection (WoSCC), encompassing articles published up to May 2023. The analysis included original studies, abstracts, and review articles focusing on TBI-related research. Bibliometric indicators such as total publications (TP), total citations (TC), and citations per publication (C/P) were utilized to assess the research output and impact. Visualization tools such as VOS Viewer were employed for thematic mapping and to illustrate international collaboration networks.

Results

The analysis revealed a substantial body of literature, with 7,315 articles published by 2,650 institutions involving, 13,979 authors. Full-length articles were predominant, highlighting their central role in the dissemination of TBI research. The authorship pattern indicated a diverse range of scholarly influences, with both established and emerging researchers contributing significantly. The USA led in global contributions, with significant international collaborations observed. Recent research trends have focused on refining TBI treatment techniques, investigating long-term patient effects, and advancing dosimetry and biomarker studies for radiation exposure assessments.

Conclusions

TBI research exhibits a dynamic and multifaceted landscape, driven by global collaboration and innovation. It highlights the clinical challenges of TBI, such as its adverse effects and the need for tailored treatments in pediatric cases. Crucially, the study also acknowledges the fundamental science underpinning TBI, including its effects on inflammatory and apoptotic pathways, DNA damage, and the varied sensitivity of cells and tissues. This dual focus enhances our understanding of TBI, guiding future research toward innovative solutions and comprehensive care.

A customizable aluminum compensator system for total body irradiation

Purpose

To develop a simplified aluminum compensator system for total body irradiation (TBI) that is easy to assemble and modify in a short period of time for customized patient treatments.

Methods

The compensator is composed of a combination of 0.3 cm thick aluminum bars, two aluminum T‐tracks, spacers, and metal bolts. The system is mounted onto a plexiglass block tray. The design consists of 11 fixed sectors spanning from the patient's head to feet. The outermost sectors utilize 7.6 cm wide aluminum bars, while the remaining sectors use 2.5 cm wide aluminum bars. There is a magnification factor of 5 from the compensator to the patient treatment plane. Each bar of aluminum is interconnected at each adjacent sector with a tongue and groove arrangement and fastened to the T‐track using a metal washer, bolt, and nut. Inter‐bar leakage of the compensator was tested using a water tank and diode. End‐to‐end measurements were performed with an ion chamber in a solid water phantom and also with a RANDO phantom using internal and external optically stimulated luminescent detectors (OSLDs). In‐vivo patient measurements from the first 20 patients treated with this aluminum compensator were compared to those from 20 patients treated with our previously used lead compensator system.

Results

The compensator assembly time was reduced to 20–30 min compared to the 2–4 h it would take with the previous lead design. All end‐to‐end measurements were within 10% of that expected. The median absolute in‐vivo error for the aluminum compensator was 3.7%, with 93.8% of measurements being within 10% of that expected. The median error for the lead compensator system was 5.3%, with 85.1% being within 10% of that expected.

Conclusion

This design has become the standard compensator at our clinic. It allows for quick assembly and customization along with meeting the Task Group 29 recommendations for dose uniformity.

Novel rotatable tabletop for total-body irradiation using a linac-based VMAT technique

BACKGROUND

Volumetric Modulated Arc Therapy (VMAT) techniques have recently been implemented in clinical practice for total-body irradiation (TBI). To date, most techniques still use special couches, translational tables, or other self-made immobilization devices for dose delivery. Aim of the present study was to report the first results of a newly developed rotatable tabletop designed for VMAT-TBI.

METHODS

The VMAT-TBI technique theoretically allows the use of any standard positioning device at the linear accelerator. Nevertheless, the main problem is that patients taller than 120 cm cannot be treated in one position due to the limited cranial-caudal couch shift capacities of the linac. Therefore, patients are usually turned from a head-first supine position (HFS) to a feet-first supine position (FFS) to overcome this limitation. The newly developed rotatable tabletop consists completely of carbon fiber, including the ball bearing within the base plate of the rotation unit. The patient can be turned 180° from a HFS to a FFS position within a few seconds, without the need of repositioning.

RESULTS

The first 20 patients had a median age of 47 years, and received TBI before bone marrow transplantation for acute myeloid leukemia. Most patients (13/20) received a TBI dose of 4 Gy in 2 fractions, twice daily. The mean number of applied monitor units (MU) was 6476 MU using a multi-arcs and multi-isocenter VMAT-TBI technique. The tabletop has been successfully used in daily clinical practice and helped to keep the treatment times at an acceptable level. During the first treatment fraction, the mean overall treatment time (OTT) was 57 min. Since no additional image guidance was used in fraction 2 of the same day, the OTT was reduced to mean 38 min.

CONCLUSIONS

The easy and reproducible rotation of the patient on the treatment couch using the rotatable tabletop, is time-efficient and overcomes the need of repositioning the patient after turning from a HFS to a FFS position during VMAT TBI. Furthermore, it prevents couch-gantry collisions, incorrect isocenter shifts and beam mix-up due to predicted absolute table coordinates, which are recorded to the R + V system with the corresponding beams.

Effect of changes in monitor unit rate and energy on dose rate of total marrow irradiation based on Linac volumetric arc therapy

Background

This study set out to evaluate the effect of dose rate on normal tissues (the lung, in particular) and the variation in the treatment efficiency as determined by the monitor unit (MU) and energy applied in Linac-based volumetric arc therapy (VMAT) total marrow irradiation (TMI).

Methods

Linac-based VMAT plans were generated for the TMI for six patients. The planning target volume (PTV) was divided into six sub-volumes, each of which had their own isocenter. To examine the effect of the dose rate and energy, a range of MU rates (40, 60, 80, 100, 300, and 600 MU/min) were selected for 6, 10, and 15 MV. All the plans were verified by portal dosimetry.

Results

The dosimetric parameters for the target and normal tissue were consistent in terms of the energy and MU rate. The beam-on time was changed from 59.6 to 6 min for 40 and 600 MU/min. When 40 MU/min was set for the lung, the dose rate delivered to the lung was less than 6 cGy/min (that is, 90%), while the beam-on time was approximately 10 min. The percentage volume of the lung receiving 20 cGy/min was 1.47, 3.94, and 6.22% at 6, 10, and 15 MV, respectively. However, for 600 MU/min, the total lung volume received over 6 cGy/min regardless of the energy, and over 20 cGy/min for 10 and 15 MV (i.e., 54.4% for 6 MV).

Conclusions

In TMI treatment, reducing the dose rate administered to the lung can decrease the incidence of pulmonary toxicity. To reduce the probability of normal tissue complications, the selection of the lowest MU rate is recommended for fields including the lung. To minimize the total treatment time, the maximum MU rate can be applied to other fields.

Electronic supplementary material

The online version of this article (10.1186/s13014-019-1296-y) contains supplementary material, which is available to authorized users.

Extended SSD VMAT treatment for total body irradiation

In this work, we develop a total body irradiation technique that utilizes arc delivery, a buildup spoiler, and inverse optimized multileaf collimator (MLC) motion to shield organs at risk. The current treatment beam model is verified to confirm its applicability at extended source‐to‐surface distance (SSD). The delivery involves 7–8 volumetric modulated arc therapy arcs delivered to the patient in the supine and prone positions. The patient is positioned at a 90° couch angle on a custom bed with a 1 cm acrylic spoiler to increase surface dose. Single‐step optimization using a patient CT scan provides enhanced dose homogeneity and limits organ at risk dose. Dosimetric data of 109 TBI patients treated with this technique is presented along with the clinical workflow. Treatment planning system (TPS) verification measurements were performed at an extended SSD of 175 cm. Measurements included: a 4‐point absolute depth‐dose curve, profiles at 1.5, 5, and 10 cm depth, absolute point‐dose measurements of an treatment field, 2D Gafchromic^® films at four locations, and measurements of surface dose at multiple locations of a Alderson phantom. The results of the patient DVH parameters were: Body‐5 mm D98 95.3 ± 1.5%, Body‐5 mm D2 114.0 ± 3.6%, MLD 102.8 ± 2.1%. Differences between measured and calculated absolute depth‐dose values were all <2%. Profiles at extended SSD had a maximum point difference of 1.3%. Gamma pass rates of 2D films were greater than 90% at 5%/1 mm. Surface dose measurements with film confirmed surface dose values of >90% of the prescription dose. In conclusion, the inverse optimized delivery method presented in the paper has been used to deliver homogenous dose to over 100 patients. The method provides superior patient comfort utilizing a commercial TPS. In addition, the ability to easily shield organs at risk is available through the use of MLCs.

National survey of myeloablative total body irradiation prior to hematopoietic stem cell transplantation in Japan: survey of the Japanese Radiation Oncology Study Group (JROSG)

A myeloablative regimen that includes total-body irradiation (TBI) before hematopoietic stem cell transplantation results in higher patient survival rates than achieved with regimens without TBI. The TBI protocol, however, varies between institutions. In October 2015, the Japanese Radiation Oncology Study Group initiated a national survey of myeloablative TBI (covering 2010-2014). Among the 186 Japanese institutions performing TBI, 90 (48%) responded. The 82 institutions that had performed myeloablative TBI during this period treated 2698 patients with malignant disease [leukemia (2082 patients, 77.2%), malignant lymphoma (378, 14%)] and 37 with non-malignant disease [severe aplastic anemia (20, 54%), inborn errors of metabolism (5, 14%)]. A linear accelerator was used at all institutions. The institutions were divided into 41 large and 41 small institutions based on the median number of patients. The long source-surface distance technique was the method of choice in the 34 institutions (82.9%) and the moving-couch technique in the 7 (17.1%) in the large institutions. The schedules most routinely used by the participating institutions consisted of 12 Gy/6 fractions/3 days (26 institutions, 63.5%) in the large institutions. The dose rate varied from 5 to 26 cGy/min. The lungs and lenses were routinely shielded in 23 large institutions (56.1%), and only the lungs in 9 large institutions (21.9%). At lung-shielding institutions, the most frequent maximum acceptable total dose for the lungs was 8 Gy (19 institutions, 27.5%). Our results reveal considerable differences in the TBI methods used by Japanese institutions and thus the challenges in designing multicenter randomized trials based on TBI.

Translating bed total body irradiation lung shielding and dose optimization using asymmetric MLC apertures

A revised translating bed total body irradiation (TBI) technique is developed for shielding organs at risk (lungs) to tolerance dose limits, and optimizing dose distribution in three dimensions (3D) using an asymmetrically‐adjusted, dynamic multileaf collimator. We present a dosimetric comparison of this technique with a previously developed symmetric MLC‐based TBI technique. An anthropomorphic RANDO phantom is CT scanned with 3 mm slice thickness. Radiological depths (RD) are calculated on individual CT slices along the divergent ray lines. Asymmetric MLC apertures are defined every 9 mm over the phantom length in the craniocaudal direction. Individual asymmetric MLC leaf positions are optimized based on RD values of all slices for uniform dose distributions. Dose calculations are performed in the Eclipse treatment planning system over these optimized MLC apertures. Dose uniformity along midline of the RANDO phantom is within the confidence limit (CL) of 2.1% (with a confidence probability p=0.065). The issue of over‐ and underdose at the interfaces that is observed when symmetric MLC apertures are used is reduced from more than ±4% to less than ±1.5% with asymmetric MLC apertures. Lungs are shielded by 20%, 30%, and 40% of the prescribed dose by adjusting the MLC apertures. Dose‐volume histogram analysis confirms that the revised technique provides effective lung shielding, as well as a homogeneous dose coverage to the whole body. The asymmetric technique also reduces hot and cold spots at lung‐tissue interfaces compared to previous symmetric MLC‐based TBI technique. MLC‐based shielding of OARs eliminates the need to fabricate and setup cumbersome patient‐specific physical blocks.

PACS number(s): 87.55.‐x, 87.55.de, 87.55.D‐

Pulmonary toxicity following total body irradiation for acute lymphoblastic leukaemia: The Ottawa Hospital Cancer Centre (TOHCC) experience

Purpose

To review the incidence of clinically significant pulmonary toxicity following total body irradiation (TBI) as a part of the conditioning regimen for acute lymphoblastic leukaemia (ALL) patients undergoing bone marrow transplantation (BMT) at The Ottawa Hospital Cancer Centre.

Methods

This is a retrospective review of ALL patients who received TBI in The Ottawa Hospital Bone Marrow Transplant Program (TOH-BMT) as part of their conditioning regimen from 1991 to 2011 inclusive. The patients were treated using a locally developed translating-couch irradiation technique. We have analysed all available data for the first 100 days following TBI to determine the incidence of radiation-induced pulmonary toxicities.

Results

Of the total 622 patients undergoing TBI during the specified period, 88 had ALL. Median age at BMT was 30 years and the conditioning regimens varied. A total of 74 (84%) patients received 12 Gy/6 F/BID of TBI. A total of 55 (63%) patients have died, 32 (36%) within the 1st year after BMT. In the 1st year, pulmonary events were reported for 24 (27%) patients, and the follow-up notes were unavailable for seven (8%). Pulmonary toxicities were reported as the cause of death for six patients, five (6%) within the 1st year. It is estimated that the total number of deaths in the 1st year possibly attributed to radiation-induced lung injury was four (4·5%). Eight (9%) patients had symptoms suggestive of non-lethal grade 2–3 radiation-induced pneumonitis.

Conclusions

TBI continues to be an important component of the conditioning regimen for ALL patients undergoing BMT, and the incidence of radiation-induced pulmonary injury, using our technique and lung dose, is comparable to the published literature.

3D heterogeneous dose distributions for total body irradiation patients

One major objective of total body irradiation (TBI) treatments is to deliver a uniform dose in the entire body of the patient. Looking at 3D dose distributions for constant speed (CstSpeed) and variable speed (VarSpeed) translating couch TBI treatments, dose uniformity and the effect of body heterogeneities were evaluated. This study was based on retrospective dose calculations of 10 patients treated with a translating couch TBI technique. Dose distributions for CstSpeed and VarSpeed TBI treatments have been computed with Pinnacle3 treatment planning system in homogeneous (Homo) and heterogeneous (Hetero) dose calculation modes. A specific beam model was implemented in Pinnacle3 to allow an accurate dose calculation adapted for TBI special aspects. Better dose coverages were obtained with Homo/VarSpeed treatments compared to Homo/CstSpeed cases including smaller overdosage areas. Large differences between CstSpeed and VarSpeed dose calculations were observed in the brain, spleen, arms, legs, and lateral parts of the abdomen (differences between V100% mean values up to 57.5%). Results also showed that dose distributions for patients treated with CstSpeed TBI greatly depend on the patient morphology, especially for pediatric and overweight cases. Looking at heterogeneous dose calculations, underdosages (2%-5%) were found in high-density regions (e.g., bones), while overdosages (5%-15%) were found in low-density regions (e.g., lungs). Overall, Homo/CstSpeed and Hetero/VarSpeed dose distributions showed more hot spots than Homo/VarSpeed and were greatly dependent on patient anatomy. CstSpeed TBI treatments allow a simple optimization process but lead to less dose uniformity due to the patient anatomy. VarSpeed TBI treatments require more complex dose optimization, but lead to a better dose uniformity independent of the patient morphology. Finally, this study showed that heterogeneities should be considered in dose calculations in order to obtain a better optimization and, therefore, to improve dose uniformity.

Implementation of a lateral total body irradiation technique with 6 MV photons: The University of Texas Health Science Center in San Antonio experience

Purpose: Total body irradiation (TBI) involves delivery of marrow-ablative or suppressive dose to the entirety of the marrow habitus. In its current practice, TBI often involves positioning the patient in an uncomfortable upright body position for extended periods of time while delivering radiation dose via anteroposterior/posterioanterior (AP/PA) fields. In an effort to maximize reproducibility and patient comfort, especially for paediatric patients, a supine lateral total body irradiation (LTBI) protocol was implemented as preparatory regimen for bone marrow transplant.

Methods and Materials: One hundred and forty-five patient charts were reviewed. Patients were treated in supine position with hands clasped over the upper abdomen in a comfortable position. They were placed in a methylcrylate body box and irradiated with opposed lateral fields at extended distance of 350 cm to the midplane of the patient. Each field delivered 100 cGy with a midplane dose of 200 cGy per fraction. Dose regimes varied from 200 to 1,200 cGy total doses. Custom lead compensating filters were utilized. A 6 MV photon beam produced by a Varian Clinac 600c linear accelerator was applied. In vivo thermoluminescent dosimeter (TLD) readings were taken for anatomical regions of interest (ROI). TLDs were placed in each ROI under a 1.5-cm-thick bolus for maximum dose build-up.

Results and Conclusion: The resulting data demonstrate a dosimetric variability of anatomical ROI from reference prescription dose of less than 3%. LTBI has been used for more than ten years in our institution and produced favourable results for more than 100 patients. We suggest this LTBI approach to facilitate successful treatment of children who require TBI while maintaining dose uniformity as recommended by the American Association of Physicists in Medicine Report 17.