Harmonic source wavefront aberration correction for ultrasound imaging

Phase-Aberration Correction for HIFU Therapy Using a Multielement Array and Backscattering of Nonlinear Pulses

Phase aberrations induced by heterogeneities in body wall tissues introduce a shift and broadening of the high-intensity focused ultrasound (HIFU) focus, associated with decreased focal intensity. This effect is particularly detrimental for HIFU therapies that rely on shock front formation at the focus, such as boiling histotripsy (BH). In this article, an aberration correction method based on the backscattering of nonlinear ultrasound pulses from the focus is proposed and evaluated in tissue-mimicking phantoms. A custom BH system comprising a 1.5-MHz 256-element array connected to a Verasonics V1 engine was used as a pulse/echo probe. Pulse inversion imaging was implemented to visualize the second harmonic of the backscattered signal from the focus inside a phantom when propagating through an aberrating layer. Phase correction for each array element was derived from an aberration-correction method for ultrasound imaging that combines both the beamsum and the nearest neighbor correlation method and adapted it to the unique configuration of the array. The results were confirmed by replacing the target tissue with a fiber-optic hydrophone. Comparing the shock amplitude before and after phase-aberration correction showed that the majority of losses due to tissue heterogeneity were compensated, enabling fully developed shocks to be generated while focusing through aberrating layers. The feasibility of using a HIFU phased-array transducer as a pulse-echo probe in harmonic imaging mode to correct for phase aberrations was demonstrated.

Timing-error-difference calibration of a two-dimensional array imaging system using the overlapping-subaperture algorithm

Timing errors in the transmitting and receiving electronic channels of an imaging system can generate different transmission and reception phase-aberration profiles. To decide if these two profiles need to be measured separately, an overlapping-subaperture algorithm has been proposed in a previous paper to measure the difference between timing errors in transmitting and receiving channels connected to each element in a two-dimensional array. This algorithm has been used to calibrate a custom built imaging system with a curved linear two-dimensional array, and the results are presented in this paper. The experimental results have demonstrated that the overlapping-subaperture algorithm is capable of calibrating the timing-error-difference profile of this imaging system with a standard deviation of only a few nanoseconds. Experimental results have also shown that the time-error-difference profile of this imaging system is smaller than one tenth of a wavelength and there is no need to measure the transmission and reception phase-aberration profiles separately. The derived average phase-aberration profile using the near-field signal-redundancy algorithm can be used to correct phase aberrations for both transmission and reception.

Correction of tissue-motion effects on common-midpoint signals using reciprocal signals

The near field signal redundancy algorithm for phase-aberration correction is sensitive to tissue motion because several separated transmissions are usually needed to acquire a set of common-midpoint signals. If tissues are moving significantly due to, for example, heart beats, the effects of tissue motion on common-midpoint signals need to be corrected before the phase-aberration profile can be successfully measured. Theoretical analyses in this paper show that the arrival-time difference between a pair of common-midpoint signals due to tissue motion is usually very similar to that between the pair of reciprocal signals acquired using the same two transmissions. Based on this conclusion, an algorithm for correcting tissue-motion effects on the peak position of cross-correlation functions between common-midpoint signals is proposed and initial experimental results are also presented.