1
|
Li X, Liu B, Wu Q. Enhanced Low-Frequency Sound Absorption of a Porous Layer Mosaicked with Perforated Resonator. Polymers (Basel) 2022; 14:polym14020223. [PMID: 35054630 PMCID: PMC8777819 DOI: 10.3390/polym14020223] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/21/2021] [Revised: 01/02/2022] [Accepted: 01/04/2022] [Indexed: 02/04/2023] Open
Abstract
A composite structure composed of a porous-material layer mosaicked with a perforated resonator is proposed to improve the low-frequency sound absorption of the porous layer. This structure is investigated in the form of a porous-material matrix (PM) and a perforated resonator (PR), and the PR is a thin perforated plate filled with porous material in its back cavity. Theoretical and numerical models are established to predict the acoustic impedance and sound absorption coefficient of the proposed structure, and two samples made of polyurethane and melamine, respectively, are tested in an impedance tube. The predicted results are consistent with that of the measured. Compared with a single porous layer with the same thickness, the results show that the designed structure provides an additional sound absorption peak at low frequencies. The proposed structure is compact and has an effective absorption bandwidth of more than two octaves especially below the frequency corresponding to 1/4 wavelength. A comparison is also made between the sound absorption coefficients of the proposed structure and a classical micro-perforated plate (MPP), and the results reveal equivalent acoustic performance, suggesting that it can be used as an alternative to the MPP for low–mid frequency sound absorption. Moreover, the influences of the main parameters on the sound absorption coefficient of PPCS are also analyzed, such as the hole diameter, area ratio, flow resistance, and porous-material thickness in the PR. The mechanism of sound absorption is discussed through the surface acoustic impedance and the distributions of particle velocity and sound pressure at several specific frequencies. This work provides a new idea for the applications of the thin porous layer in low- and medium-frequency sound absorption.
Collapse
Affiliation(s)
- Xin Li
- School of Mechanical & Automobile Engineering, Qingdao University of Technology, No. 777 Jialingjiang Road, Qingdao 266520, China; (X.L.); (Q.W.)
| | - Bilong Liu
- School of Mechanical & Automobile Engineering, Qingdao University of Technology, No. 777 Jialingjiang Road, Qingdao 266520, China; (X.L.); (Q.W.)
- Correspondence:
| | - Qianqian Wu
- School of Mechanical & Automobile Engineering, Qingdao University of Technology, No. 777 Jialingjiang Road, Qingdao 266520, China; (X.L.); (Q.W.)
- Key Lab of Industrial Fluid Energy Conservation and Pollution Control, Qingdao University of Technology, Ministry of Education, No. 777 Jialingjiang Road, Qingdao 266520, China
| |
Collapse
|
2
|
Gaussian-Based Machine Learning Algorithm for the Design and Characterization of a Porous Meta-Material for Acoustic Applications. APPLIED SCIENCES-BASEL 2021. [DOI: 10.3390/app12010333] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
The scope of this work is to consolidate research dealing with the vibroacoustics of periodic media. This investigation aims at developing and validating tools for the design and characterization of global vibroacoustic treatments based on foam cores with embedded periodic patterns, which allow passive control of acoustic paths in layered concepts. Firstly, a numerical test campaign is carried out by considering some perfectly rigid inclusions in a 3D-modeled porous structure; this causes the excitation of additional acoustic modes due to the periodic nature of the meta-core itself. Then, through the use of the Delany–Bazley–Miki equivalent fluid model, some design guidelines are provided in order to predict several possible sets of characteristic parameters (that is unit cell dimension and foam airflow resistivity) that, constrained by the imposition of the total thickness of the acoustic package, may satisfy the target functions (namely, the frequency at which the first Transmission Loss (TL) peak appears, together with its amplitude). Furthermore, when the Johnson–Champoux–Allard model is considered, a characterization task is performed, since the meta-material description is used in order to determine its response in terms of resonance frequency and the TL increase at such a frequency. Results are obtained through the implementation of machine learning algorithms, which may constitute a good basis in order to perform preliminary design considerations that could be interesting for further generalizations.
Collapse
|
3
|
Investigation of Acoustic Properties on Wideband Sound-Absorber Composed of Hollow Perforated Spherical Structure with Extended Tubes and Porous Materials. APPLIED SCIENCES-BASEL 2020. [DOI: 10.3390/app10248978] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Traditional porous media such as melamine foam absorb sound due to their three-dimensional porous struts. However, the acoustic properties at low frequencies are greatly related to its thickness. In this paper, a novel type of thin and lightweight sound absorber composed of melamine foam and hollow perforated spherical structure with extended tubes (HPSET) is introduced to enhance the sound absorption performance at low frequencies. A theoretical model for the normal absorption coefficient of the HPSET with melamine foam is established. Good agreements are observed between the simulated and the experimental results. Compared with the virgin melamine foam, the proposed absorber can greatly improve the low-frequency sound absorption and retain the mid- to high-frequency sound absorption, while the thickness of the proposed absorber is less than 1/28 of the wavelength.
Collapse
|
4
|
Effect of the Pore Shape and Size of 3D-Printed Open-Porous ABS Materials on Sound Absorption Performance. MATERIALS 2020; 13:ma13204474. [PMID: 33050297 PMCID: PMC7600319 DOI: 10.3390/ma13204474] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/28/2020] [Revised: 10/01/2020] [Accepted: 10/05/2020] [Indexed: 11/25/2022]
Abstract
Noise has a negative impact on our environment and human health. For this reason, it is necessary to eliminate excessive noise levels. This paper is focused on the study of the sound absorption properties of materials with open-porous structures, which were made of acrylonitrile butadiene styrene (ABS) material using additive technology. Four types of structures (Cartesian, Octagonal, Rhomboid, and Starlit) were evaluated in this work, and every structure was prepared in three different volume ratios of the porosity and three different thicknesses. The sound absorption properties of the investigated ABS specimens were examined utilizing the normal incidence sound absorption and noise reduction coefficients, which were experimentally determined by the transfer function method using a two-microphone acoustic impedance tube. This work deals with various factors that influence the sound absorption performance of four different types of investigated ABS material’s structures. It was found, in this study, that the sound absorption performance of the investigated ABS specimens is strongly affected by different factors, specifically by the structure geometry, material volume ratio, excitation frequency of an acoustic wave, material’s thickness, and air space size behind the tested sound-absorbing materials.
Collapse
|
5
|
Zhang X, Qu Z, Wang H. Engineering Acoustic Metamaterials for Sound Absorption: From Uniform to Gradient Structures. iScience 2020; 23:101110. [PMID: 32408175 PMCID: PMC7225741 DOI: 10.1016/j.isci.2020.101110] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/02/2020] [Revised: 04/03/2020] [Accepted: 04/23/2020] [Indexed: 11/30/2022] Open
Abstract
The traditional sound absorption problem has not been completely resolved over the last 200 years. At every stage, its research has changed depending on practical requirements and current technologies. Phononic crystals (PCs) and acoustic metamaterials (AMs) have gained attention because of their extensive investigation and development over the past 30 years. Especially, the use of these materials brings new vitality into the traditional sound absorption problem to figure out broad working band and low-frequency absorption. This review highlights recent progress in sound absorption—from airborne to waterborne absorption—and gradient-index AMs. Progress in gradient-index AMs is singled out because of their favorable impedance matching, good viscous and thermal dissipation, and lengthened propagation paths compared with those of other materials. The progress in sound absorption of PCs and AMs is promising to serve as the next-generation sound absorbing materials, trap and reuse acoustic energy, and attenuate earthquake/tsunami wave in the future.
Collapse
Affiliation(s)
- Xiuhai Zhang
- Key Laboratory of Thermo-Fluid Science and Engineering of Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049, P.R. China
| | - Zhiguo Qu
- Key Laboratory of Thermo-Fluid Science and Engineering of Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049, P.R. China.
| | - Hui Wang
- School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, P.R. China
| |
Collapse
|
6
|
Jena DP, Qiu X. Sound transmission loss of porous materials in ducts with embedded periodic scatterers. THE JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA 2020; 147:978. [PMID: 32113265 DOI: 10.1121/10.0000650] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/30/2019] [Accepted: 01/13/2020] [Indexed: 06/10/2023]
Abstract
Porous materials that are commonly used for sound absorption have poor sound insulation capability. In this paper, rigid scatterers are installed periodically inside porous materials to improve their transmission loss (TL) with the Bragg diffraction. The Delany-Bazley impedance model is used to model the porous material and the transfer matrix method is adopted to calculate the TL of the mixed structure in a duct. Simulation results with a different number of scatterers and porous materials with different airflow resistivity show that the TL of porous materials can be increased significantly with periodically arranged scatterers. The decoupled analysis reveals that the TL of the mixed structure is larger than the sum of the TL of individual components in most frequency bands, except that around the first Bragg resonance frequency.
Collapse
Affiliation(s)
- Dibya P Jena
- Centre for Audio, Acoustics and Vibration, Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, Australia
| | - Xiaojun Qiu
- Centre for Audio, Acoustics and Vibration, Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, Australia
| |
Collapse
|
7
|
Feng L. Enhancement of low frequency sound absorption by placing thin plates on surface or between layers of porous materials. THE JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA 2019; 146:EL141. [PMID: 31472554 DOI: 10.1121/1.5121571] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/29/2019] [Accepted: 07/24/2019] [Indexed: 06/10/2023]
Abstract
Rigid thin plates can be used, either on the surface or between layers of materials, to improve the sound absorption properties of porous materials at low frequencies, especially for materials with low sound absorption. Measurement results obtained from a 100 mm impedance tube, for different combinations of porous materials and thin plates, are supplied. Possible physical explanations are discussed. The size of the plate, together with the original properties of the porous material, determines the useful frequency region of the method. The technique of surface-placed thin plates can be directly applied to existing structures without making any changes of the original system, and the results are comparable to those with more complicated modifications.
Collapse
Affiliation(s)
- Leping Feng
- Department of Aeronautical and Vehicle Engineering, KTH Royal Institute of Technology, SE-100 44 Stockholm,
| |
Collapse
|
8
|
Abstract
Acoustic metamaterial science is an emerging field at the frontier of modern acoustics. It provides a prominent platform for acoustic wave control in subwavelength-sized metadevices or metasystems. However, most of the metamaterials can only work in a narrow frequency band once fabricated, which limits the practical application of acoustic metamaterials. This paper highlights some recent progress in tunable acoustic metamaterials based on various modulation techniques. Acoustic metamaterials have been designed to control the attenuation of acoustic waves, invisibility cloaking, and acoustic wavefront engineering, such as focusing via manipulating the acoustic impedance of metamaterials. The reviewed techniques are promising in extending the novel acoustics response into wider frequency bands, in that tunable acoustic metamaterials may be exploited for unusual applications compared to conventional acoustic devices.
Collapse
|
9
|
Ge H, Yang M, Ma C, Lu MH, Chen YF, Fang N, Sheng P. Breaking the barriers: advances in acoustic functional materials. Natl Sci Rev 2017. [DOI: 10.1093/nsr/nwx154] [Citation(s) in RCA: 116] [Impact Index Per Article: 16.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022] Open
Abstract
Abstract
Acoustics is a classical field of study that has witnessed tremendous developments over the past 25 years. Driven by the novel acoustic effects underpinned by phononic crystals with periodic modulation of elastic building blocks in wavelength scale and acoustic metamaterials with localized resonant units in subwavelength scale, researchers in diverse disciplines of physics, mathematics, and engineering have pushed the boundary of possibilities beyond those long held as unbreakable limits. More recently, structure designs guided by the physics of graphene and topological electronic states of matter have further broadened the whole field of acoustic metamaterials by phenomena that reproduce the quantum effects classically. Use of active energy-gain components, directed by the parity–time reversal symmetry principle, has led to some previously unexpected wave characteristics. It is the intention of this review to trace historically these exciting developments, substantiated by brief accounts of the salient milestones. The latter can include, but are not limited to, zero/negative refraction, subwavelength imaging, sound cloaking, total sound absorption, metasurface and phase engineering, Dirac physics and topology-inspired acoustic engineering, non-Hermitian parity–time synthetic active metamaterials, and one-way propagation of sound waves. These developments may underpin the next generation of acoustic materials and devices, and offer new methods for sound manipulation, leading to exciting applications in noise reduction, imaging, sensing and navigation, as well as communications.
Collapse
Affiliation(s)
- Hao Ge
- National Laboratory of Solid State Microstructures and Department of Materials Science and Engineering, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093, China
| | - Min Yang
- Department of Physics, Hong Kong University of Science and Technology, Hong Kong, China
| | - Chu Ma
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Ming-Hui Lu
- National Laboratory of Solid State Microstructures and Department of Materials Science and Engineering, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093, China
- Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
| | - Yan-Feng Chen
- National Laboratory of Solid State Microstructures and Department of Materials Science and Engineering, College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093, China
- Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
| | - Nicholas Fang
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Ping Sheng
- Department of Physics, Hong Kong University of Science and Technology, Hong Kong, China
| |
Collapse
|
10
|
Cui S, Harne RL. Tailoring broadband acoustic energy suppression characteristics of double porosity metamaterials with compression constraints and mass inclusions. THE JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA 2017; 141:4715. [PMID: 28679247 DOI: 10.1121/1.4986745] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
A metamaterial that capitalizes on a double porosity architecture is introduced for controlling broadband acoustic energy suppression properties. When the metamaterial is subjected to static compressive stress, a global rotation of the internal metamaterial architecture is induced that softens the effective stiffness and results in a considerable means to tailor wave transmission and absorption properties. The influences of mass inclusions and compression constraints are examined by computational and experimental efforts. The results indicate that the mass inclusions and applied constraints can significantly impact the absorption and transmission properties of double porosity metamaterials, while the appropriate utilization of the underlying poroelastic media can further magnify these parametric influences. Based on the widespread implementation of compressed poroelastic media in applications, the results of this research uncover how internal metamaterial architecture and constraints may be exploited to enhance engineering noise control properties while using less poroelastic material mass.
Collapse
Affiliation(s)
- Shichao Cui
- Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, Ohio 43210, USA
| | - Ryan L Harne
- Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, Ohio 43210, USA
| |
Collapse
|
11
|
Weisser T, Groby JP, Dazel O, Gaultier F, Deckers E, Futatsugi S, Monteiro L. Acoustic behavior of a rigidly backed poroelastic layer with periodic resonant inclusions by a multiple scattering approach. THE JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA 2016; 139:617-629. [PMID: 26936546 DOI: 10.1121/1.4940669] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
The acoustic response of a rigidly backed poroelastic layer with a periodic set of elastic cylindrical inclusions embedded is studied. A semi-analytical approach is presented, based on Biot's 1956 theory to account for the deformation of the skeleton, coupling mode matching technique, Bloch wave representation, and multiple scattering theory. This model is validated by comparing the derived absorption coefficients to finite element simulations. Numerical results are further exposed to investigate the influence of the properties of the inclusions (type, material properties, size) of this structure, while a modal analysis is performed to characterize the dynamic behaviors leading to high acoustic absorption. Particularly, in the case of thin viscoelastic membranes, an absorption coefficient larger than 0.8 is observed on a wide frequency band. This property is found to be due to the coupling between the first volume mode of the inclusion and the trapped mode induced by the periodic array and the rigid backing, for a wavelength in the air smaller than 11 times the material thickness.
Collapse
Affiliation(s)
- Thomas Weisser
- Laboratoire d'Acoustique de l'Université du Maine, UMR6613 CNRS/Université du Maine, 72085 Le Mans Cedex 9, France
| | - Jean-Philippe Groby
- Laboratoire d'Acoustique de l'Université du Maine, UMR6613 CNRS/Université du Maine, 72085 Le Mans Cedex 9, France
| | - Olivier Dazel
- Laboratoire d'Acoustique de l'Université du Maine, UMR6613 CNRS/Université du Maine, 72085 Le Mans Cedex 9, France
| | - François Gaultier
- Laboratoire d'Acoustique de l'Université du Maine, UMR6613 CNRS/Université du Maine, 72085 Le Mans Cedex 9, France
| | - Elke Deckers
- Department of Mechanical Engineering, Katholieke Universiteit Leuven, 3001 Heverlee, Belgium
| | | | | |
Collapse
|
12
|
Groby JP, Lagarrigue C, Brouard B, Dazel O, Tournat V, Nennig B. Enhancing the absorption properties of acoustic porous plates by periodically embedding Helmholtz resonators. THE JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA 2015; 137:273-280. [PMID: 25618058 DOI: 10.1121/1.4904534] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
This paper studies the acoustical properties of hard-backed porous layers with periodically embedded air filled Helmholtz resonators. It is demonstrated that some enhancements in the acoustic absorption coefficient can be achieved in the viscous and inertial regimes at wavelengths much larger than the layer thickness. This enhancement is attributed to the excitation of two specific modes: Helmholtz resonance in the viscous regime and a trapped mode in the inertial regime. The enhancement in the absorption that is attributed to the Helmholtz resonance can be further improved when a small amount of porous material is removed from the resonator necks. In this way the frequency range in which these porous materials exhibit high values of the absorption coefficient can be extended by using Helmholtz resonators with a range of carefully tuned neck lengths.
Collapse
Affiliation(s)
- J-P Groby
- Laboratoire d'Acoustique de l'Université du Maine, L'Université Nantes Angers Le Mans, Université du Maine, CNRS, UMR-6613 CNRS, Avenue Olivier Messiaen, 72085 Le Mans, France
| | - C Lagarrigue
- Laboratoire d'Acoustique de l'Université du Maine, L'Université Nantes Angers Le Mans, Université du Maine, CNRS, UMR-6613 CNRS, Avenue Olivier Messiaen, 72085 Le Mans, France
| | - B Brouard
- Laboratoire d'Acoustique de l'Université du Maine, L'Université Nantes Angers Le Mans, Université du Maine, CNRS, UMR-6613 CNRS, Avenue Olivier Messiaen, 72085 Le Mans, France
| | - O Dazel
- Laboratoire d'Acoustique de l'Université du Maine, L'Université Nantes Angers Le Mans, Université du Maine, CNRS, UMR-6613 CNRS, Avenue Olivier Messiaen, 72085 Le Mans, France
| | - V Tournat
- Laboratoire d'Acoustique de l'Université du Maine, L'Université Nantes Angers Le Mans, Université du Maine, CNRS, UMR-6613 CNRS, Avenue Olivier Messiaen, 72085 Le Mans, France
| | - B Nennig
- Laboratoire d'Ingénierie des Systèmes Mécaniques et des Matériaux, EA 2336, Supméca, 3 Rue Fernand Hainaut, 93407 Saint-Ouen Cedex, France
| |
Collapse
|