Sound transmission loss of porous materials in ducts with embedded periodic scatterers

Insertion loss of regular finite cylinder arrays with porous layers between the rows

It has been demonstrated recently via simulations in a duct that the sound transmission loss of porous materials can be increased with embedded periodic scatterers [Jena and Qiu, J. Acoust. Soc. Am. 147, 978-983 (2020)]. In this paper, the insertion loss (IL) of two types of finite size structures constructed by installing two parallel porous sheets within rows of periodic scatterers is investigated in free field. One structure uses rigid cylindrical shells, while the other uses split ring shells, which are obtained by making uniform vertical slits in cylindrical shells. The simulation results show that the mixed structure has larger IL than the summation of the ILs of the individual periodic scatterers and two parallel porous sheets in the frequency range after the first bandgap due to Bragg diffraction, and an additional peak in IL is introduced for the split ring scatterers due to their local resonance. The amplitude, frequency, and bandwidth of the resonance peak can be tuned by changing the geometry of the slit for some specific broadband sound absorption. Finally, the experiment results obtained in an anechoic chamber are presented to support the simulation results and analyses.

Effect of the Pore Shape and Size of 3D-Printed Open-Porous ABS Materials on Sound Absorption Performance

Noise has a negative impact on our environment and human health. For this reason, it is necessary to eliminate excessive noise levels. This paper is focused on the study of the sound absorption properties of materials with open-porous structures, which were made of acrylonitrile butadiene styrene (ABS) material using additive technology. Four types of structures (Cartesian, Octagonal, Rhomboid, and Starlit) were evaluated in this work, and every structure was prepared in three different volume ratios of the porosity and three different thicknesses. The sound absorption properties of the investigated ABS specimens were examined utilizing the normal incidence sound absorption and noise reduction coefficients, which were experimentally determined by the transfer function method using a two-microphone acoustic impedance tube. This work deals with various factors that influence the sound absorption performance of four different types of investigated ABS material’s structures. It was found, in this study, that the sound absorption performance of the investigated ABS specimens is strongly affected by different factors, specifically by the structure geometry, material volume ratio, excitation frequency of an acoustic wave, material’s thickness, and air space size behind the tested sound-absorbing materials.

Sound transmission across a narrow sidebranch array duct muffler at low Mach number

The sound transmission loss across a duct muffler in the form of a linear array of 11 narrow sidebranches is examined experimentally in the present study. The introduction of a low Mach number duct flow deteriorates the broadband acoustical performance of the muffler and strong sound transmission loss dips and sound amplifications are observed at high flow speeds. It is found that a stronger acoustic pressure magnitude inside the sidebranches improves the muffler's performance in the presence of the duct flow. A theoretical analysis using a 2-sidebranch array muffler is conducted and the results indicate the possibility of increasing the sound pressures inside the sidebranches by locating the shorter sidebranch upstream of the longer one. The results of further experiments validate the theoretical deduction. Results also confirm that the muffler with sidebranches arranged in the order of decreasing acoustic impedance magnitude has stronger resilience against aerodynamic disturbance and gives better performance when the upstream excitation level and the duct flow speed are fixed.