Wear biomechanics in the slicing dentition of the giant horned dinosaur Triceratops

Trophic evolution in ornithopod dinosaurs revealed by dental wear

Ornithopod dinosaurs evolved numerous craniodental innovations related to herbivory. Nonetheless, the relationship between occlusion, tooth wear rate, and tooth replacement rate has been neglected. Here, we reconstruct tooth wear rates by measuring tooth replacement rates and tooth wear volumes, and document their dental microwear. We demonstrate that total tooth volume and rates of tooth wear increased steadily during ornithopod evolution, with deeply-nested taxa wearing up to 3360 mm3 of tooth volume/day. Increased wear resulted in asymmetric tooth crown formation with uneven von Ebner line increment width by the Late Jurassic, and in faster tooth replacement rates in multiple lineages by the mid-Cretaceous. Microwear displays a contrasting pattern, with decreasing complexity and pit percentages in deeply-nested and later-occurring taxa. We hypothesize that early ornithopods were browsers and/or frugivores but deeply nested iguanodontians were bulk-feeders, eating tougher, less nutritious plants; these trends correlate with increasing body mass and longer gut passage times.

Tooth replacement in the early-diverging neornithischian Jeholosaurus shangyuanensis and implications for dental evolution and herbivorous adaptation in Ornithischia

BACKGROUND

Tooth replacement patterns of early-diverging ornithischians, which are important for understanding the evolution of the highly specialized dental systems in hadrosaurid and ceratopsid dinosaurs, are poorly known. The early-diverging neornithischian Jeholosaurus, a small, bipedal herbivorous dinosaur from the Early Cretaceous Jehol Biota, is an important taxon for understanding ornithischian dental evolution, but its dental morphology was only briefly described previously and its tooth replacement is poorly known.

RESULTS

CT scanning of six specimens representing different ontogenetic stages of Jeholosaurus reveals significant new information regarding the dental system of Jeholosaurus, including one or two replacement teeth in nearly all alveoli, relatively complete tooth resorption, and an increase in the numbers of alveoli and replacement teeth during ontogeny. Reconstructions of Zahnreihen indicate that the replacement pattern of the maxillary dentition is similar to that of the dentary dentition but with a cyclical difference. The maxillary tooth replacement rate in Jeholosaurus is probably 46 days, which is faster than that of most other early-diverging ornithischians. During the ontogeny of Jeholosaurus, the premaxillary tooth replacement rate slows from 25 days to 33 days with similar daily dentine formation.

CONCLUSIONS

The tooth replacement rate exhibits a decreasing trend with ontogeny, as in Alligator. In a phylogenetic context, fast tooth replacement and multi-generation replacement teeth have evolved at least twice independently in Ornithopoda, and our analyses suggest that the early-diverging members of the major ornithischian clades exhibit different tooth replacement patterns as an adaption to herbivory.

Mandible mechanical properties and composition of the larval Glossosoma boltoni (Trichoptera, Insecta)

Insect feeding structures, such as mandibles, interact with the ingesta (food or/and substrate) and can be adapted in morphology, composition of material and mechanical properties. The foraging on abrasive ingesta, as on algae covering rocks, is particularly challenging because the mandibles will be prone to wear and structural failure, thus suggesting the presence of mandibular adaptations to accompany this feeding behavior. Adaptations to this are well studied in the mouthparts of molluscs and sea urchins, but for insects there are large gaps in our knowledge. In this study, we investigated the mandibles of a grazing insect, the larvae of the trichopteran Glossosoma boltoni. Using scanning electron microscopy, wear was documented on the mandibles. The highest degree was identified on the medial surface of the sharp mandible tip. Using nanoindentation, the mechanical properties, such as hardness and Young's modulus, of the medial and lateral mandible cuticles were tested. We found, that the medial cuticle of the tip was significantly softer and more flexible than the lateral one. These findings indicate that a self-sharpening mechanism is present in the mandibles of this species, since the softer medial cuticle is probably abraded faster than the harder lateral one, leading to sharp mandible tips. To investigate the origins of these properties, we visualized the degree of tanning by confocal laser scanning microscopy. The autofluorescence signal related to the mechanical property gradients. The presence of transition and alkaline earth metals by energy dispersive X-ray spectroscopy was also tested. We found Ca, Cl, Cu, Fe, K, Mg, Mn, P, S, Si, and Zn in the cuticle, but the content was very low and did not correlate with the mechanical property values.

How Triceratops got its face: An update on the functional evolution of the ceratopsian head

Ceratopsian dinosaurs arguably show some of the most extravagant external cranial morphology across all Dinosauria. For over a century, ceratopsian dinosaurs have inspired a multitude of cranial functional studies as more discoveries continued to depict a larger picture of the enormous diversity of these animals. The iconic horns and bony frills in many ceratopsians portray a plethora of shapes, sizes, and arrangements across taxa, and their overall feeding apparatus show the development of unique specializations previously unseen in large herbivores. Here, I give a brief updated review of the many functional studies investigating different aspects of the ceratopsian head. The functional role of the horns and bony frills is explored, with an overview of studies investigating their potential for weaponization or defense in either intraspecific or anti-predatory combat, among other things. A review of studies pertaining to the ceratopsian feeding apparatus is also presented here, with analyses of studies exploring their beak and snout morphology, dentition and tooth wear, cranial musculature with associated skull anatomy, and feeding biomechanics.

Microstructurally driven self-sharpening mechanism in beaver incisor enamel facilitates their capacity to fell trees

Beavers (Castor) stand out among mammals for their unique capacity to fell trees using their large, ever-growing incisors. This routine consumption of resistant fodder induces prodigious wear in the lower incisors, despite this blunting effect the incisors maintain a remarkably sharp cutting edge. Notably, the enamel edges of their incisors show a highly complex two-part microstructure of which the biomechanical import is unknown. Here, using fracture analysis, nanoindentation, and wear testing on North American beaver (C. canadensis) incisors we test the microstructure's possible contribution to maintaining incisal sharpness. Although comparable in hardness, the inner enamel preferentially fails and readily wears at 2.5 times the rate of the outer enamel. The outer microstructure redirects all fractures in parallel, decreasing fracture coalescence. Conversely, the inner microstructure facilitates crack coalescence increasing the wear rate by isolating layers of enamel prisms that readily fragment. Together these two architectures form a microstructurally driven self-sharpening mechanism contained entirely within the thin enamel shell. Our results demonstrate that enamel microstructures exposed at the occlusal surface can markedly influence both enamel crest shape and surface texture in wearing dentitions. The methods introduced here open the door to exploring the biomechanical functionality and evolution of enamel microstructures throughout Mammalia. STATEMENT OF SIGNIFICANCE: Enamel microstructure varies significantly with the diversity of diets, bite forces, and tooth shapes exhibited by mammals. However, minimal micromechanical exploration of microstructures outside of humans, leaves our understanding of biomechanical functions in a nascent stage. Using biologically informed mechanical testing, we demonstrate that the complex two-part microstructure that comprises the cutting edge of beaver incisors facilitates self-sharpening of the enamel edge. This previously unrecognized mechanism provides critical maintenance to the shape of the incisal edge ensuring continued functionality despite extreme wear incurred during feeding. More broadly, we show how the architecture of prisms and the surrounding interprismatic matrix dictate the propagation of fractures through enamel fabrics and how the pairing of enamel fabrics can result in biologically advantageous functions.

Multiple pathways to herbivory underpinned deep divergences in ornithischian evolution

The extent to which evolution is deterministic is a key question in biology,^{1,2,3,4,5,6,7,8,9} with intensive debate on how adaptation^{6,10,11,12,13} and constraints^14,15,16 might canalize solutions to ecological challenges.^4,5,6 Alternatively, unique adaptations^1,9,17 and phylogenetic contingency^1,3,18 may render evolution fundamentally unpredictable.³ Information from the fossil record is critical to this debate,^1,2,11 but performance data for extinct taxa are limited.⁷ This knowledge gap is significant, as general morphology may be a poor predictor of biomechanical performance.^17,19,20 High-fiber herbivory originated multiple times within ornithischian dinosaurs,²¹ making them an ideal clade for investigating evolutionary responses to similar ecological pressures.²² However, previous biomechanical modeling studies on ornithischian crania^17,23,24,25 have not compared early-diverging taxa spanning independent acquisitions of herbivory. Here, we perform finite-element analysis on the skull of five early-diverging members of the major ornithischian clades to characterize morphofunctional pathways to herbivory. Results reveal limited functional convergence among ornithischian clades, with each instead achieving comparable performance, in terms of reconstructed patterns and magnitudes of functionally induced stress, through different adaptations of the feeding apparatus. Thyreophorans compensated for plesiomorphic low performance through increased absolute size, heterodontosaurids expanded jaw adductor muscle volume, ornithopods increased jaw system efficiency, and ceratopsians combined these approaches. These distinct solutions to the challenges of herbivory within Ornithischia underpinned the success of this diverse clade. Furthermore, the resolution of multiple solutions to equivalent problems within a single clade through macroevolutionary time demonstrates that phenotypic evolution is not necessarily predictable, instead arising from the interplay of adaptation, innovation, contingency, and constraints.^{1,2,3,7,8,9,18}.

Multi-proxy dentition analyses reveal niche partitioning between sympatric herbivorous dinosaurs

Dentitions of the sympatric herbivorous dinosaurs Hungarosaurus (Ankylosauria, Nodosauridae) and Mochlodon (Ornithopoda, Rhabdodontidae) (Santonian, Hungary) were analysed to investigate their dietary ecology, using several complementary methods-orientation patch count, tooth replacement rate, macrowear, tooth wear rate, traditional microwear, and dental microwear texture analysis (DMTA). Tooth formation time is similar in Hungarosaurus and Mochlodon, and traditional and DMTA microwear features suggest low-browsing habits for both taxa, consistent with their inferred stances and body sizes. However, Mochlodon possesses a novel adaptation for increasing dental durability: the dentine on the working side of the crown is double the thickness of that on the balancing side. Moreover, crown morphology, enamel thickness, macrowear orientation, and wear rate differ greatly between the two taxa. Consequently, these sympatric herbivores probably exploited plants of different toughness, implying dietary selectivity and niche partitioning. Hungarosaurus is inferred to have eaten softer vegetation, whereas Mochlodon likely fed on tougher material. Compared to the much heavier, quadrupedal Hungarosaurus, the bipedal Mochlodon wore down more than twice as much of its crown volume during the functional life of the tooth. This heavy tooth wear might correlate with more intensive food processing and, in turn, could reflect differences in the metabolic requirements of these animals.

Computed tomographic analysis of the dental system of three Jurassic ceratopsians and implications for the evolution of tooth replacement pattern and diet in early-diverging ceratopsians

The dental system of ceratopsids is among the most specialized structure in Dinosauria by the presence of tooth batteries and high-angled wear surfaces. However, the origin of this unique dental system is poorly understood due to a lack of relevant knowledge in early-diverging ceratopsians. Here, we study the dental system of three earliest-diverging Chinese ceratopsians: Yinlong and Hualianceratops from the early Late Jurassic of Xinjiang and Chaoyangsaurus from the Late Jurassic of Liaoning Province. By micro-computed tomographic analyses, our study has revealed significant new information regarding the dental system, including no more than five replacement teeth in each jaw quadrant; at most one replacement tooth in each alveolus; nearly full resorption of the functional tooth root; and occlusion with low-angled, concave wear facets. Yinlong displays an increase in the number of maxillary alveoli and a decrease in the number of replacement teeth during ontogeny as well as the retention of functional tooth remnants in the largest individual. Chaoyangsaurus and Hualianceratops have slightly more replacement teeth than Yinlong. In general, early-diverging ceratopsians display a relatively slow tooth replacement rate and likely use gastroliths to triturate foodstuffs. The difference in dietary strategy might have influenced the tooth replacement pattern in later-diverging ceratopsians.

A new juvenile Yamaceratops (Dinosauria, Ceratopsia) from the Javkhlant Formation (Upper Cretaceous) of Mongolia

Here we report a new articulated skeleton of Yamaceratops dorngobiensis (MPC-D 100/553) from the Khugenetjavkhlant locality at the Shine Us Khudag (Javkhlant Formation, ?Santonian-Campanian) of the eastern Gobi Desert, Mongolia, which represents the first substantially complete skeleton and the first juvenile individual of this taxon. The specimen includes a nearly complete cranium and large portions of the vertebral column and appendicular skeleton. Its skull is about 2/3 the size of the holotype specimen, based on mandibular length. Its juvenile ontogenetic stage is confirmed by multiple indicators of skeletal and morphological immaturity known in ceratopsians, such as the long-grained surface texture on the long bones, the smooth external surface on the postorbital, open neurocentral sutures of all caudal vertebrae, a large orbit relative to the postorbital and jugal, the low angle of the lacrimal ventral ramus relative to the maxillary teeth row, narrow frontal, and straight ventral edge of the dentary. Osteohistological analysis of MPC-D 100/553 recovered three lines of arrested growth, implying around 3 years of age when it died, and verified this specimen's immature ontogenetic stage. The specimen adds a new autapomorphy of Yamaceratops, the anteroventral margin of the fungiform dorsal end of the lacrimal being excluded from the antorbital fossa. Furthermore, it shows a unique combination of diagnostic features of some other basal neoceratopsians: the ventrally hooked rostral bone as in Aquilops americanus and very tall middle caudal neural spines about or more than four times as high as the centrum as in Koreaceratops hwaseongensis, Montanoceratops cerorhynchus, and Protoceratops andrewsi. The jugal with the subtemporal ramus deeper than the suborbital ramus as in the holotype specimen is also shared with A. americanus, Liaoceratops yanzigouensis, and juvenile P. andrewsi. Adding 38 new scorings into the recent comprehensive data matrix of basal Neoceratopsia and taking into account the ontogenetically variable characters recovered Y. dorngobiensis as the sister taxon to Euceratopsia (Leptoceratopsidae plus Coronosauria). A second phylogenetic analysis with another matrix for Ceratopsia also supported this position. The new phylogenetic position of Y. dorngobiensis is important in ceratopsian evolution, as this taxon represents one of the basalmost neoceratopsians with a broad, thin frill and hyper-elongated middle caudal neural spines while still being bipedal.

The diet of early birds based on modern and fossil evidence and a new framework for its reconstruction

Birds are some of the most diverse organisms on Earth, with species inhabiting a wide variety of niches across every major biome. As such, birds are vital to our understanding of modern ecosystems. Unfortunately, our understanding of the evolutionary history of modern ecosystems is hampered by knowledge gaps in the origin of modern bird diversity and ecosystem ecology. A crucial part of addressing these shortcomings is improving our understanding of the earliest birds, the non-avian avialans (i.e. non-crown birds), particularly of their diet. The diet of non-avian avialans has been a matter of debate, in large part because of the ambiguous qualitative approaches that have been used to reconstruct it. Here we review methods for determining diet in modern and fossil avians (i.e. crown birds) as well as non-avian theropods, and comment on their usefulness when applied to non-avian avialans. We use this to propose a set of comparable, quantitative approaches to ascertain fossil bird diet and on this basis provide a consensus of what we currently know about fossil bird diet. While no single approach can precisely predict diet in birds, each can exclude some diets and narrow the dietary possibilities. We recommend combining (i) dental microwear, (ii) landmark-based muscular reconstruction, (iii) stable isotope geochemistry, (iv) body mass estimations, (v) traditional and/or geometric morphometric analysis, (vi) lever modelling, and (vii) finite element analysis to reconstruct fossil bird diet accurately. Our review provides specific methodologies to implement each approach and discusses complications future researchers should keep in mind. We note that current forms of assessment of dental mesowear, skull traditional morphometrics, geometric morphometrics, and certain stable isotope systems have yet to be proven effective at discerning fossil bird diet. On this basis we report the current state of knowledge of non-avian avialan diet which remains very incomplete. The ancestral dietary condition in non-avian avialans remains unclear due to scarce data and contradictory evidence in Archaeopteryx. Among early non-avian pygostylians, Confuciusornis has finite element analysis and mechanical advantage evidence pointing to herbivory, whilst Sapeornis only has mechanical advantage evidence indicating granivory, agreeing with fossilised ingested material known for this taxon. The enantiornithine ornithothoracine Shenqiornis has mechanical advantage and pedal morphometric evidence pointing to carnivory. In the hongshanornithid ornithuromorph Hongshanornis only mechanical advantage evidence indicates granivory, but this agrees with evidence of gastrolith ingestion in this taxon. Mechanical advantage and ingested fish support carnivory in the songlingornithid ornithuromorph Yanornis. Due to the sparsity of robust dietary assignments, no clear trends in non-avian avialan dietary evolution have yet emerged. Dietary diversity seems to increase through time, but this is a preservational bias associated with a predominance of data from the Early Cretaceous Jehol Lagerstätte. With this new framework and our synthesis of the current knowledge of non-avian avialan diet, we expect dietary knowledge and evolutionary trends to become much clearer in the coming years, especially as fossils from other locations and climates are found. This will allow for a deeper and more robust understanding of the role birds played in Mesozoic ecosystems and how this developed into their pivotal role in modern ecosystems.

Nesting at extreme polar latitudes by non-avian dinosaurs

The unexpected discovery of non-avian dinosaurs from Arctic and Antarctic settings has generated considerable debate about whether they had the capacity to reproduce at high latitudes-especially the larger-bodied, hypothetically migratory taxa. Evidence for dinosaurian polar reproduction remains very rare, particularly for species that lived at the highest paleolatitudes (>75°). Here we report the discovery of perinatal and very young dinosaurs from the highest known paleolatitude for the clade-the Cretaceous Prince Creek Formation (PCF) of northern Alaska. These data demonstrate Arctic reproduction in a diverse assemblage of large- and small-bodied ornithischian and theropod species. In terms of overall diversity, 70% of the known dinosaurian families, as well as avialans (birds), in the PCF are represented by perinatal individuals, the highest percentage for any North American Cretaceous formation. These findings, coupled with prolonged incubation periods, small neonate sizes, and short reproductive windows suggest most, if not all, PCF dinosaurs were nonmigratory year-round Arctic residents. Notably, we reconstruct an annual chronology of reproductive events for the ornithischian dinosaurs using refined paleoenvironmental/plant phenology data and new insights into dinosaur incubation periods. Seasonal resource limitations due to extended periods of winter darkness and freezing temperatures placed severe constraints on dinosaurian reproduction, development, and maintenance, suggesting these taxa showed polar-specific life history strategies, including endothermy.

Bite force estimates in juvenile Tyrannosaurus rex based on simulated puncture marks

Background

Bite marks attributed to adult Tyrannosaurus rex have been subject to numerous studies. However, few bite marks attributed to T. rex have been traced to juveniles, leaving considerable gaps in understanding ontogenetic changes in bite mechanics and force, and the paleoecological role of juvenile tyrannosaurs in the late Cretaceous.

Methods

Here we present bite force estimates for a juvenile Tyrannosaurus rex based on mechanical tests designed to replicate bite marks previously attributed to a T. rex of approximately 13 years old. A maxillary tooth of the juvenile Tyrannosaurus specimen BMR P2002.4.1 was digitized, replicated in dental grade cobalt chromium alloy, and mounted to an electromechanical testing system. The tooth was then pressed into bovine long bones in various locations with differing cortical bone thicknesses at varying speeds for a total of 17 trials. Forces required to replicate punctures were recorded and puncture dimensions were measured.

Results

Our experimentally derived linear models suggest bite forces up to 5,641.19 N from cortical bone thickness estimated from puncture marks on an Edmontosaurus and a juvenile Tyrannosaurus. These findings are slightly higher than previously estimated bite forces for a juvenile Tyrannosaurus rex of approximately the same size as BMR P2002.4.1 but fall within the expected range when compared to estimates of adult T. rex.

Discussion

The results of this study offer further insight into the role of juvenile tyrannosaurs in late Cretaceous ecosystems. Furthermore, we discuss the implications for feeding mechanisms, feeding behaviors, and ontogenetic niche partitioning.

Introduction: biopolymers and biocomposites

Biopolymers and biocomposites are an exciting class of ubiquitous materials. Interest in these materials has been driven in part by their biocompatibility/biodegradability, sustainability, potentially low-cost, renewability, being environmental benign, among other properties. These fascinating materials come in a range of forms from the DNA and RNA that is essential to life to the cellulose and collagen that mechanically reinforce tissues and as hybrid organic–inorganic composites like teeth. Herein, we summarize some aspects of the two classes of materials biopolymer and biocomposites, exploring specific examples while pointing to potential monomer sources, neoteric post-extraction modification and processing conditions. This lays the foundation to the following more specific chapters while illustrating the breadth of these material classes.

A neoceratopsian dinosaur from the early Cretaceous of Mongolia and the early evolution of ceratopsia

Ceratopsia is a diverse dinosaur clade from the Middle Jurassic to Late Cretaceous with early diversification in East Asia. However, the phylogeny of basal ceratopsians remains unclear. Here we report a new basal neoceratopsian dinosaur Beg tse based on a partial skull from Baruunbayan, Ömnögovi aimag, Mongolia. Beg is diagnosed by a unique combination of primitive and derived characters including a primitively deep premaxilla with four premaxillary teeth, a trapezoidal antorbital fossa with a poorly delineated anterior margin, very short dentary with an expanded and shallow groove on lateral surface, the derived presence of a robust jugal having a foramen on its anteromedial surface, and five equally spaced tubercles on the lateral ridge of the surangular. This is to our knowledge the earliest known occurrence of basal neoceratopsian in Mongolia, where this group was previously only known from Late Cretaceous strata. Phylogenetic analysis indicates that it is sister to all other neoceratopsian dinosaurs.

Congyu Yu et al. present the partial skull of a new basal neoceratopsian dinosaur from Mongolia. They show that this group is a sister taxon to all other neoceratopsian dinosaurs, and that it occurs earlier in the Cretaceous than previously shown.

Beyond Description: The Many Facets of Dental Biomechanics

Teeth lie at the interface between an animal and its environment and, with some exceptions, act as a major component of resource procurement through food acquisition and processing. Therefore, the shape of a tooth is closely tied to the type of food being eaten. This tight relationship is of use to biologists describing the natural history of species and given the high instance of tooth preservation in the fossil record, is especially useful for paleontologists. However, correlating gross tooth morphology to diet is only part of the story, and much more can be learned through the study of dental biomechanics. We can explore the mechanics of how teeth work, how different shapes evolved, and the underlying forces that constrain tooth shape. This review aims to provide an overview of the research on dental biomechanics, in both mammalian and non-mammalian teeth, and to synthesize two main approaches to dental biomechanics to develop an integrative framework for classifying and evaluating dental functional morphology. This framework relates food material properties to the dynamics of food processing, in particular how teeth transfer energy to food items, and how these mechanical considerations may have shaped the evolution of tooth morphology. We also review advances in technology and new techniques that have allowed more in-depth studies of tooth form and function.

Dietary palaeoecology of an Early Cretaceous armoured dinosaur (Ornithischia; Nodosauridae) based on floral analysis of stomach contents

The exceptionally well-preserved holotype of the armoured dinosaur Borealopelta markmitchelli (Ornithischia; Nodosauridae) from the Early Cretaceous (Clearwater Formation) of northern Alberta preserves a distinct mass within the abdominal cavity. Fourteen independent criteria (including: co-allochthony, anatomical position, gastroliths) support the interpretation of this mass as ingested stomach contents-a cololite. Palynomorphs in the cololite are a subset of the more diverse external sample. Analysis of the cololite documents well-preserved plant material dominated by leaf tissue (88%), including intact sporangia, leaf cross-sections and cuticle, but also including stems, wood and charcoal. The leaf fraction is dominated (85%) by leptosporangiate ferns (subclass Polypodiidae), with low cycad-cycadophyte (3%) and trace conifer foliage. These data represent the most well-supported and detailed direct evidence of diet in an herbivorous dinosaur. Details of the dietary palaeoecology of this nodosaur are revealed, including: selective feeding on ferns; preferential ingestion of leptosporangiate ferns to the exclusion of Osmundaceae and eusporangiate ferns such as Marattiaceae; and incidental consumption of cycad-cycadophyte and conifer leaves. The presence of significant (6%) charcoal may represent the dietary use of recently burned conifer forest undergoing fern succession, early evidence of a fire succession ecology, as is associated with many modern large herbivores.

Competition structured a Late Cretaceous megaherbivorous dinosaur assemblage

Modern megaherbivore community richness is limited by bottom-up controls, such as resource limitation and resultant dietary competition. However, the extent to which these same controls impacted the richness of fossil megaherbivore communities is poorly understood. The present study investigates the matter with reference to the megaherbivorous dinosaur assemblage from the middle to upper Campanian Dinosaur Park Formation of Alberta, Canada. Using a meta-analysis of 21 ecomorphological variables measured across 14 genera, contemporaneous taxa are demonstrably well-separated in ecomorphospace at the family/subfamily level. Moreover, this pattern is persistent through the approximately 1.5 Myr timespan of the formation, despite continual species turnover, indicative of underlying structural principles imposed by long-term ecological competition. After considering the implications of ecomorphology for megaherbivorous dinosaur diet, it is concluded that competition structured comparable megaherbivorous dinosaur communities throughout the Late Cretaceous of western North America.

Dinosaur paleohistology: review, trends and new avenues of investigation

In the mid-19th century, the discovery that bone microstructure in fossils could be preserved with fidelity provided a new avenue for understanding the evolution, function, and physiology of long extinct organisms. This resulted in the establishment of paleohistology as a subdiscipline of vertebrate paleontology, which has contributed greatly to our current understanding of dinosaurs as living organisms. Dinosaurs are part of a larger group of reptiles, the Archosauria, of which there are only two surviving lineages, crocodilians and birds. The goal of this review is to document progress in the field of archosaur paleohistology, focusing in particular on the Dinosauria. We briefly review the "growth age" of dinosaur histology, which has encompassed new and varied directions since its emergence in the 1950s, resulting in a shift in the scientific perception of non-avian dinosaurs from "sluggish" reptiles to fast-growing animals with relatively high metabolic rates. However, fundamental changes in growth occurred within the sister clade Aves, and we discuss this major evolutionary transition as elucidated by histology. We then review recent innovations in the field, demonstrating how paleohistology has changed and expanded to address a diversity of non-growth related questions. For example, dinosaur skull histology has elucidated the formation of curious cranial tissues (e.g., "metaplastic" tissues), and helped to clarify the evolution and function of oral adaptations, such as the dental batteries of duck-billed dinosaurs. Lastly, we discuss the development of novel techniques with which to investigate not only the skeletal tissues of dinosaurs, but also less-studied soft-tissues, through molecular paleontology and paleohistochemistry-recently developed branches of paleohistology-and the future potential of these methods to further explore fossilized tissues. We suggest that the combination of histological and molecular methods holds great potential for examining the preserved tissues of dinosaurs, basal birds, and their extant relatives. This review demonstrates the importance of traditional bone paleohistology, but also highlights the need for innovation and new analytical directions to improve and broaden the utility of paleohistology, in the pursuit of more diverse, highly specific, and sensitive methods with which to further investigate important paleontological questions.

The Materials of Mastication: Material Science of the Humble Tooth

Dental functional morphology, as a field, represents a confluence of materials science and biology. Modern methods in materials testing have been influential in driving the understanding of dental tissues and tooth functionality. Here we present a review of dental enamel, the outermost tissue of teeth. Enamel is the hardest biological tissue and exhibits remarkable resilience even when faced with a variety of mechanical threats. In the light of recent work, we progress the argument that the risk of mechanical degradation across multiple scales exhibits a strong and continued selection pressure on structural organization of enamel. The hierarchical nature of enamel structure presents a range of scale-dependent toughening mechanisms and provides a means by which natural selection can drive the specialization of this tissue from nanoscale reorganization to whole tooth morphology. There has been much learnt about the biomechanics of enamel recently, yet our understanding of the taxonomic diversity of this tissue is still lacking and may form an interesting avenue for future research.

A comparative study of the mechanical properties of a dinosaur and crocodile fossil teeth

Vertebrate teeth are complex structures adapted in terms of shape and structure to serve a variety of functions like biting and grinding. Thus, examining the morphology, composition and mechanical properties of the teeth can aid in providing insights into the feeding behaviour of extinct species. We here provide the first mechanical characterisation of teeth in a spinosaurid dinosaur, Suchomimus tenerensis, and a pholidosaurid crocodylomorph, Sarcosuchus imperator. Our results show that both species have similar macrostructure of enamel, dental and interfacial layers, and similar composition, the main constituent being fluorapatite. Microindentation tests show that Suchomimus teeth have lower elastic modulus and hardness, as compared to Sarchosuchus. On the contrary, Sarcosuchus teeth have lower toughness. Nanoindentation showed the existence of mechanical gradients from dentin to enamel in Suchomimus and, less prominently, in Sarcosuchus. This was also supported by wear tests showing that in Suchomimus the dentin region is more wear-prone than the enamel region. With still scarce information available on the dietary regimes in extinct species, the analysis of micro and nano-mechanical properties of fossils teeth might be a help in targeting specific biological questions. However, much is still unknown concerning the changes underwent by organic material during diagenesis making at present impossible to definitely conclude if the differences in the mechanical properties of Suchomimus and Sarchosuchus here retrieved imply that the two species adopted different strategies when dealing with food processing or are the result of disparate taphonomic histories.

Tooth development, histology, and enamel microstructure in Changchunsaurus parvus: Implications for dental evolution in ornithopod dinosaurs

The great diversity of dinosaurian tooth shapes and sizes, and in particular, the amazing dental complexity in derived ornithischians has attracted a lot of attention. However, the evolution of dental batteries in hadrosaurids and ceratopsids is difficult to understand without a broader comparative framework. Here we describe tooth histology and development in the "middle" Cretaceous ornithischian dinosaur Changchunsaurus parvus, a small herbivore that has been characterized as an early ornithopod, or even as a more basal ornithischian. We use this taxon to show how a "typical" ornithischian dentition develops, copes with wear, and undergoes tooth replacement. Although in most respects the histological properties of their teeth are similar to those of other dinosaurs, we show that, as in other more derived ornithischians, in C. parvus the pulp chamber is not invaded fully by the newly developing replacement tooth until eruption is nearly complete. This allowed C. parvus to maintain an uninterrupted shearing surface along a single tooth row, while undergoing continuous tooth replacement. Our histological sections also show that the replacement foramina on the lingual surfaces of the jaws are likely the entry points for an externally placed dental lamina, a feature found in many other ornithischian dinosaurs. Surprisingly, our histological analysis also revealed the presence of wavy enamel, the phylogenetically earliest occurrence of this type of tissue. This contradicts previous interpretations that this peculiar type of enamel arose in association with more complex hadrosauroid dentitions. In view of its early appearance, we suggest that wavy enamel may have evolved in association with a shearing-type dentition in a roughly symmetrically-enameled crown, although its precise function still remains somewhat of a mystery.

Incremental growth of therizinosaurian dental tissues: implications for dietary transitions in Theropoda

Previous investigations document functional and phylogenetic signals in the histology of dinosaur teeth. In particular, incremental lines in dentin have been used to determine tooth growth and replacement rates in several dinosaurian clades. However, to date, few studies have investigated the dental microstructure of theropods in the omnivory/herbivory spectrum. Here we examine dental histology of Therizinosauria, a clade of large-bodied theropods bearing significant morphological evidence for herbivory, by examining the teeth of the early-diverging therizinosaurian Falcarius utahensis, and an isolated tooth referred to Suzhousaurus megatherioides, a highly specialized large-bodied representative. Despite attaining some of the largest body masses among maniraptoran theropod dinosaurs, therizinosaurian teeth are diminutive, measuring no more than 0.90 cm in crown height (CH) and 0.38 cm in crown base length (CBL). Comparisons with other theropods and non-theropodan herbivorous dinosaurs reveals that when controlling for estimated body mass, crown volume in therizinosaurians plots most closely with dinosaurs of similar dietary strategy as opposed to phylogenetic heritage. Analysis of incremental growth lines in dentin, observed in thin sections of therizinosaurian teeth, demonstrates that tooth growth rates fall within the range of other archosaurs, conforming to hypothesized physiological limitations on the production of dental tissues. Despite dietary differences between therizinosaurians and hypercarnivorous theropods, the types of enamel crystallites present and their spatial distribution—i.e., the schmelzmuster of both taxa—is limited to parallel enamel crystallites, the simplest form of enamel and the plesiomorphic condition for Theropoda. This finding supports previous hypotheses that dental microstructure is strongly influenced by phylogeny, yet equally supports suggestions of reduced reliance on oral processing in omnivorous/herbivorous theropods rather than the microstructural specializations to diet exhibited by non-theropodan herbivorous dinosaurs. Finally, although our sample is limited, we document a significant reduction in the rate of enamel apposition contrasted with increased relative enamel thickness between early and later diverging therizinosaurians that coincides with anatomical evidence for increased specializations to herbivory in the clade.

Histological evidence for a dynamic dental battery in hadrosaurid dinosaurs

The first histological study of an entire hadrosaurid dental battery provides a comprehensive look at tooth movement within this complex structure. Previous studies have focused on isolated teeth, or in-situ batteries, but this is the first study to examine an entire dental battery of any dinosaur. The absence of direct tooth-to-tooth contact across the entire battery and a unique arrangement of the dental tissues in hadrosaurids led us to compare their teeth with the ever-growing incisors of mammals. The similarity in the distributions of tissues along the incisor, coupled with continuous eruption, make for helpful comparisons to hadrosaurid teeth. The mammalian ever-growing incisor can be used as a model to extrapolate the soft tissue connections and eruptive mechanisms within the hadrosaurid dental battery. Serial sections across the adult dental battery reveal signs of gradual ontogenetic tooth migration. Extensive remodeling of the alveolar septa and the anteroposterior displacement of successive generations of teeth highlight the gradual migration of tooth generations within the battery. These eruptive and ontogenetic tooth movements would not be possible without a ligamentous connection between successive teeth and the jaws, underscoring the dynamic nature of one of the most unique and complex dental systems in vertebrate history.

Extreme tooth enlargement in a new Late Cretaceous rhabdodontid dinosaur from Southern France

Rhabdodontidae is a successful clade of ornithopod dinosaurs, characteristic of Late Cretaceous continental faunas in Europe. A new rhabdodontid from the late Campanian, of southern France, Matheronodon provincialis gen. et sp. nov., is characterized by the extreme enlargement of both its maxillary and dentary teeth, correlated to a drastic reduction in the number of maxillary teeth (4 per generation in MMS/VBN-02-102). The interalveolar septa on the maxilla are alternately present or resorbed ventrally so as to be able to lodge such enlarged teeth. The rhabdodontid dentition and masticatory apparatus were adapted for producing a strict and powerful shearing action, resembling a pair of scissors. With their relatively simple dentition, contrasting with the sophisticated dental batteries in contemporary hadrosaurids, Matheronodon and other rhabdodontids are tentatively interpreted as specialized consumers of tough plant parts rich in sclerenchyma fibers, such as Sabalites and Pandanites.

Dietary adaptions in the ultrastructure of dinosaur dentine

Teeth are key to understanding the feeding ecology of both extant and extinct vertebrates. Recent studies have highlighted the previously unrecognized complexity of dinosaur dentitions and how specific tooth tissues and tooth shapes differ between taxa with different diets. However, it is unknown how the ultrastructure of these tooth tissues contributes to the differences in feeding style between taxa. In this study, we use third harmonic generation microscopy and scanning electron microscopy to examine the ultrastructure of the dentine in herbivorous and carnivorous dinosaurs to understand how the structure of this tissue contributes to the overall utility of the tooth. Morphometric analyses of dentinal tubule diameter, density and branching rates reveal a strong signal for dietary preferences, with herbivorous saurischian and ornithischian dinosaurs consistently having higher dentinal tubule density than their carnivorous relatives. We hypothesize that this relates to the hardness of the dentine, where herbivorous taxa have dentine that is more resistant to breakage and wear at the dentine-enamel junction than carnivorous taxa. This study advocates the detailed study of dentine and the use of advanced microscopy techniques to understand the evolution of dentition and feeding ecology in extinct vertebrates.

The Biomechanics Behind Extreme Osteophagy in Tyrannosaurus rex

Most carnivorous mammals can pulverize skeletal elements by generating tooth pressures between occluding teeth that exceed cortical bone shear strength, thereby permitting access to marrow and phosphatic salts. Conversely, carnivorous reptiles have non-occluding dentitions that engender negligible bone damage during feeding. As a result, most reptilian predators can only consume bones in their entirety. Nevertheless, North American tyrannosaurids, including the giant (13 metres [m]) theropod dinosaur Tyrannosaurus rex stand out for habitually biting deeply into bones, pulverizing and digesting them. How this mammal-like capacity was possible, absent dental occlusion, is unknown. Here we analyzed T. rex feeding behaviour from trace evidence, estimated bite forces and tooth pressures, and studied tooth-bone contacts to provide the answer. We show that bone pulverization was made possible through a combination of: (1) prodigious bite forces (8,526–34,522 newtons [N]) and tooth pressures (718–2,974 megapascals [MPa]) promoting crack propagation in bones, (2) tooth form and dental arcade configurations that concentrated shear stresses, and (3) repetitive, localized biting. Collectively, these capacities and behaviors allowed T. rex to finely fragment bones and more fully exploit large dinosaur carcasses for sustenance relative to competing carnivores.

Morphometry, Microstructure, and Wear Pattern of Neornithischian Dinosaur Teeth From the Upper Cretaceous Iharkút Locality (Hungary)

Teeth of iguanodontian ornithopods and ceratopsians could be remarkably similar, thus the referral of isolated dental material to particular neornithischian clades can be highly problematic. These groups are represented by the rhabdodontid Mochlodon vorosi and the basal coronosaurian Ajkaceratops kozmai in the Upper Cretaceous Csehbánya Formation at Iharkút (western Hungary). Whereas teeth of Mochlodon are common elements at the locality, no dental material belonging to Ajkaceratops was identified until now. Here we used mathematical statistical approaches, as well as tooth wear and dental microstructure analysis in order to decide whether the teeth previously referred to Mochlodon can be treated as a homogenous sample, or some remains belong rather to Ajkaceratops. According to our results, there was a striking morphological and structural convergence between the teeth of both taxa. However, the wear study revealed the existence of two different patterns within the sample. One is characterized by straight and parallel microstriations that suggest orthal movements during the jaw closure. This pattern was associated with Mochlodon. The other pattern appeared only on a few teeth, and it can be differentiated by its distinctive curved microstriations that indicate circumpalinal chewing. Because curved striations have never been described in ornithopods, but are found in several neoceratopsians, this pattern was associated here with Ajkaceratops. Here we present the first teeth that can provisionally be referred to the latter genus. We believe that the methodology discussed in this article will facilitate distinguishing ceratopsian and ornithopod teeth in other localities as well. Anat Rec, 300:1439-1463, 2017. © 2017 Wiley Periodicals, Inc.

The Predentary Bone and Its Significance in the Evolution of Feeding Mechanisms in Ornithischian Dinosaurs

The characteristic predentary bone in ornithischian dinosaurs is a unique, unpaired element located at the midline of the mandibular symphysis. Although traditionally thought to only be a plant "nipping" bone, the true functional significance of this bone among feeding mechanisms of ornithischian dinosaurs is poorly known. Recent studies of a select few ornithischian genera have suggested rotation of the mandibular corpora around their long axes relative to their midline joint articulation with the predentary bone. This study aims to re-evaluate these hypotheses as well as provide in-depth qualitative comparative descriptions of predentary bone morphology in ornithischian genera throughout all subclades, including heterodontosaurids, thyreophorans, ornithopods, and marginocephalians. Descriptions evaluate overall shape of the predentary, its articular surfaces contacting the rostral ends of the dentaries, and the morphology of the rostral extent of the dentaries and their midline symphysis. Functionally relevant morphologies in each predentary morphotype are accentuated for further speculation of feeding mechanisms. Three predentary morphotypes are described throughout ornithischian subclades and each plays a unique role in feeding adaptations. Most notably, the predentary likely evolved as a midline axial point of the mandibular symphysis for simultaneous variable movement or rotation of the mandibular corpora in many, but not all, taxa. This simultaneous movement of the hemimandibles would have aided in feeding on both sides of the jaw at once. The function of the predentary as well as other jaw adaptations is discussed for genera throughout all subclades, focusing on both general shape and joint morphology. Anat Rec, 299:1358-1388, 2016. © 2016 Wiley Periodicals, Inc.

Dental microwear reveals mammal-like chewing in the neoceratopsian dinosaur Leptoceratops gracilis

Extensive oral processing of food through dental occlusion and orbital mandibular movement is often cited as a uniquely mammalian trait that contributed to their evolutionary success. Save for mandibular translation, these adaptations are not seen in extant archosaurs or lepidosaurs. In contrast, some ornithischian dinosaurs show evidence of precise dental occlusion, habitual intraoral trituration and complex jaw motion. To date, however, a robust understanding of the diversity of jaw mechanics within non-avian dinosaurs, and its comparison with other vertebrates, remains unrealized. Large dental batteries, well-developed dental wear facets, and robust jaws suggests that neoceratopsian (horned) dinosaurs were capable chewers. But, biomechanical analyses have assumed a relatively simple, scissor-like (orthal) jaw mechanism for these animals. New analyses of dental microwear, presented here, show curvilinear striations on the teeth of Leptoceratops. These features indicate a rostral to caudal orbital motion of the mandible during chewing. A rostrocaudal mandibular orbit is seen in multituberculates, haramiyid allotherians, and some rodents, and its identification in Leptoceratops gracilis is the first evidence of complex, mammal-like chewing in a ceratopsian dinosaur. The term circumpalinal is here proposed to distinguish this new style of chewing from other models of ceratopsian mastication that also involve a palinal component. This previously unrecognized complexity in dinosaurian jaw mechanics indicates that some neoceratopsian dinosaurs achieved a mammalian level of masticatory efficiency through novel adaptive solutions.

Specializations of the mandibular anatomy and dentition of Segnosaurus galbinensis (Theropoda: Therizinosauria)

Definitive therizinosaurid cranial materials are exceptionally rare, represented solely by an isolated braincase and tooth in the North American taxon Nothronychus mckinleyi, the remarkably complete skull of the Asian taxon Erlikosaurus andrewsi, and the lower hemimandibles of Segnosaurus galbinensis. To date, comprehensive descriptions of the former taxa are published; however, the mandibular materials of S. galbinensis have remained largely understudied since their initial description in 1979. Here we provide a comprehensive description of the well-preserved hemimandibles and dentition of S. galbinensis (MPC-D 100/80), from the Upper Cretaceous Bayanshiree Formation, Gobi Desert, Mongolia. The subrectangular and ventrally displaced caudal hemimandible, extreme ventral deflection of the rostral dentary, and edentulism of the caudal dentary of S. galbinensis are currently apomorphic among therizinosaurians. Unique, unreported dental traits including lingually folded mesial carinae, development of a denticulated triangular facet on the distal carinae near the cervix, and extracarinal accessory denticles, suggest a highly specialized feeding strategy in S. galbinensis. The presence of triple carinae on the distalmost lateral tooth crowns is also unique, although may represent an abnormality. Contrasted with the simplistic dentition of the contemporaneous therizinosaurid E. andrewsi, the dentition of S. galbinensis is indicative of niche partitioning in food acquisition, processing, or resources among known therizinosaurids inhabiting Asian ecosystems in the Late Cretaceous. Although not quantitatively correlated with diet, this suite of specializations is otherwise unique among theropod dinosaurs and supports derived inferences of facultative or obligate herbivory in therizinosaurids, ultimately adding novel information to our understanding of ecomorphology in theropods.

Evolutionary Trends in the Jaw Adductor Mechanics of Ornithischian Dinosaurs

Jaw mechanics in ornithischian dinosaurs have been widely studied for well over a century. Most of these studies, however, use only one or few taxa within a given ornithischian clade as a model for feeding mechanics across the entire clade. In this study, mandibular mechanical advantages among 52 ornithischian genera spanning all subclades are calculated using 2D lever arm methods. These lever arm calculations estimate the effect of jaw shape and difference in adductor muscle line of action on relative bite forces along the jaw. Results show major instances of overlap between taxa in tooth positions at which there was highest mechanical advantage. A relatively low bite force is seen across the tooth row among thyreophorans (e.g., stegosaurs and ankylosaurs), with variation among taxa. A convergent transition occurs from a more evenly distributed bite force along the jaw in basal ornithopods and basal marginocephalians to a strong distal bite force in hadrosaurids and ceratopsids, respectively. Accordingly, adductor muscle vector angles show repeated trends from a mid-range caudodorsal orientation in basal ornithischians to a decrease in vector angles indicating more caudally oriented jaw movements in derived taxa (e.g., derived thyreophorans, basal ornithopods, lambeosaurines, pachycephalosaurs, and derived ceratopsids). Analyses of hypothetical jaw morphologies were also performed, indicating that both the coronoid process and lowered jaw joint increase moment arm length therefore increasing mechanical advantage of the jaw apparatus. Adaptive trends in craniomandibular anatomy show that ornithischians evolved more complex feeding apparatuses within different clades as well as morphological convergences between clades.

Evolution and Function of Dinosaur Teeth at Ultramicrostructural Level Revealed Using Synchrotron Transmission X-ray Microscopy

The relationship between tooth form and dietary preference is a crucial issue in vertebrate evolution. However, the mechanical properties of a tooth are influenced not only by its shape but also by its internal structure. Here, we use synchrotron transmission X-ray microscopy to examine the internal microstructures of multiple dinosaur teeth within a phylogenetic framework. We found that the internal microstructures of saurischian teeth are very different from advanced ornithischian teeth, reflecting differences in dental developmental strategies. The three-tissue composition (enamel-mantle dentin-bulk dentin) near the dentinoenamel junction (DEJ) in saurischian teeth represents the primitive condition of dinosaur teeth. Mantle dentin, greatly reduced or absent from DEJ in derived ornithischian teeth, is a key difference between Saurischia and Ornithischia. This may be related to the derived herbivorous feeding behavior of ornithischians, but interestingly, it is still retained in the herbivorous saurischian sauropods. The protective functions of mantle dentin with porous microstructures between enamel and bulk dentin inside typical saurischian teeth are also discussed using finite-element analysis method. Evolution of the dental modifications in ornithischian dinosaurs, with the absence of mantle dentin, may be related to changes in enamel characteristics with enamel spindles extending through the DEJ.