Exciton funneling in light-harvesting organic semiconductor microcrystals for wavelength-tunable lasers

Brightening deep-blue perovskite light-emitting diodes: A path to Rec. 2020

Deep-blue perovskite light-emitting diodes (PeLEDs) of high purity are highly sought after for next-generation displays complying with the Rec. 2020 standard. However, mixed-halide perovskite materials designed for deep-blue emitters are prone to halide vacancies, which readily occur because of the low formation energy of chloride vacancies. This degrades bandgap instability and performance. Here, we propose a chloride vacancy-targeting passivation strategy using sulfonate ligands with different chain lengths. The sulfonate groups have a strong affinity for lead(II) ions, effectively neutralizing vacancies. Our strategy successfully suppressed phase segregation, yielding color-stable deep-blue PeLEDs with an emission peak at 461 nanometers and a maximum luminance (Lmax) of 2707 candela per square meter with external quantum efficiency (EQE) of 3.05%, one of the highest for Rec. 2020 standard-compliant deep-blue PeLEDs. We also observed a notable increase in EQE up to 5.68% at Lmax of 1978 candela per square meter with an emission peak at 461 nanometers by changing the carbon chain length.

Spatially Resolved Organic Whispering-Gallery-Mode Hetero-Microrings for High-Security Photonic Barcodes

Whispering-gallery-mode (WGM) microcavities featuring distinguishable sharp peaks in a broadband exhibit enormous advantages in the field of miniaturized photonic barcodes. However, such kind of barcodes developed hitherto are primarily based on microcavities wherein multiple gain medias were blended into a single matrix, thus resulting in the limited and indistinguishable coding elements. Here, a surface tension assisted heterogeneous assembly strategy is proposed to construct the spatially resolved WGM hetero-microrings with multiple spatial colors along its circular direction. Through precisely regulating the charge-transfer (CT) strength, full-color microrings covering the entire visible range were effectively acquired, which exhibit a series of sharp and recognizable peaks and allow for the effective construction of high-quality photonic barcodes. Notably, the spatially resolved WGM hetero-microrings with multiple coding elements were finally acquired through heterogeneous nucleation and growth controlled by the directional diffusion between the hetero-emulsion droplets, thus remarkably promoting the security strength and coding capacity of the barcodes. The results would be useful to fabricate new types of organic hierarchical hybrid WGM heterostructures for optical information recording and security labels.

High-Performance Ambipolar and n-Type Emissive Semiconductors Based on Perfluorophenyl-Substituted Perylene and Anthracene

Emissive organic semiconductors are highly demanding for organic light-emitting transistors (OLETs) and electrically pumped organic lasers (EPOLs). However, it remains a great challenge to obtain organic semiconductors with high carrier mobility and high photoluminescence quantum yield simultaneously. Here, a new design strategy is reported for highly emissive ambipolar and even n-type semiconductors by introducing perfluorophenyl groups into polycyclic aromatic hydrocarbons such as perylene and anthracene. The results reveal that 3,9-diperfluorophenyl perylene (5FDPP) exhibits the ambipolar semiconducting property with hole and electron mobilities up to 0.12 and 1.89 cm² V^-1 s^-1 , and a photoluminescence quantum yield of 55%. One of the crystal forms of 5FDPA exhibits blue emission with an emission quantum yield of 52% and simultaneously shows the n-type semiconducting property with an electron mobility up to 2.65 cm² V^-1 s^-1 , which is the highest value among the reported organic emissive n-type semiconductors. Furthermore, crystals of 5FDPP are utilized to fabricate OLETs by using Ag as source-drain electrodes. The electroluminescence is detected in the transporting channels with an external quantum efficiency (EQE) of up to 2.2%, and the current density is up to 145 kA cm^-2 , which are among the highest values for single-component OLETs with symmetric electrodes.

Directional Self-Assembly of Facet-Aligned Organic Hierarchical Super-Heterostructures for Spatially Resolved Photonic Barcodes

Organic multicolor heterostructures with spatially resolved luminescent colors and identifiable patterns have exhibited considerable potential for achieving micro-/nanoscale photonic barcodes. Nevertheless, such types of barcodes reported thus far are exclusively based on a single heterostructure with limited coding elements. Here, a directional self-assembly strategy is proposed to achieve high-coding-capacity spatially resolved photonic barcodes through rationally constructing organic hierarchical super-heterostructures, where numerous subheterostructure blocks with flat hexagonal facets are precisely oriented with their specific facets via a reconfigurable capillary force. The building blocks were prepared through a one-pot sequential heteroepitaxial growth, which enables the effective modulation of the structural and color characteristics in coding structures. Significantly, a directional facet-to-facet attraction between particles via facet registration leads to the formation of well-defined 1D super-heterostructures, which contain multiple coding elements, thus providing a good platform for constructing the high-coding-capacity photonic barcodes. The results may be useful in fabricating organic hierarchical hybrid super-heterostructures for security labels and optical data recording.

Fractal Branched Microwires of Organic Semiconductor with Controlled Branching and Low-Threshold Amplified Spontaneous Emission

Fractals are quite normal in nature. However, fractal self-assembly of organic semiconductors remains challenging. Herein, we develop a facile solution assembly route to access organic microwires (MWs) comprising an oligo(p-phenylenevinylene) derivative (OPV-A) with and without branching. Instead of kinetically controlled β-OPV-A microrods (MRs), thermodynamically favored α-OPV-A gives fractal branching MW patterns. As-prepared 9,10-dicyanoanthracene (DCA) alloyed assemblies function as seeds to allow for the heteroepitaxial growth of branching α-OPV-A MWs via either coassembly or two-step seeded growth. Consequently, fractal MWs with single- and multisite growth were both achieved, accompanied by tailorable branching densities and hierarchies. Thermodynamic control and a well-matched epitaxial relationship should be crucial to the formation of fractal MW patterns. Importantly, the aligned α-OPV-A MW array functions as a multichannel optical gain medium and exhibits low-threshold amplified spontaneous emission (ASE). The present work deepens the research into fractal self-assembly of functional organic semiconductors.

Molecular doped, color-tunable, high-mobility, emissive, organic semiconductors for light-emitting transistors

Developing high-mobility emissive organic semiconductors with tunable colors is crucial for organic light-emitting transistors (OLETs), a pivotal component of integrated optoelectronic devices, but remains a great challenge. Here, we demonstrate a series of color-tunable, high-mobility, emissive, organic semiconductors via molecular doping with a high-mobility organic semiconductor, 2,6-diphenylanthracene, as the host. The well-matched molecular structures and sizes with efficient energy transfer between the host and guest enable the intrinsically high charge transport with tunable colors. High mobility with the highest value >2 cm² V^-1 s^-1 and strong emission with photoluminescence quantum yield >15.8% are obtained for these molecular-doped organic semiconductors. Last, a large color gamut for constructed OLETs is up to 59% National Television System Committee standard, meanwhile with an extremely high current density approaching 326.4 kA cm^-2, showing great potential for full-color smart display, organic electrically pumped lasers and other related logic circuitries.

Integrating Unexpected High Charge-Carrier Mobility and Low-Threshold Lasing Action in an Organic Semiconductor

Integrating high charge-carrier mobility and low-threshold lasing action in an organic semiconductor is crucial for the realization of an electrically pumped laser, but remains a great challenge. Herein, we present an organic semiconductor, named as 2,7-di(2-naphthyl)-9H-fluorene (LD-2), which shows an unexpected high charge-carrier mobility of 2.7 cm²  V^-1  s^-1 and low-threshold lasing characteristic of 9.43 μJ cm^-2 and 9.93 μJ cm^-2 and high-quality factor (Q) of 2131 and 1684 at emission peaks of 420 and 443 nm, respectively. Detailed theoretical calculations and photophysical data analysis demonstrate that a large intermolecular transfer integral of 10.36-45.16 meV together with a fast radiative transition rate of 8.0×10⁸  s^-1 are responsible for the achievement of the superior integrated optoelectronic properties in the LD-2 crystal. These optoelectronic performances of LD-2 are among the highest reported low-threshold lasing organic semiconductors with efficient charge transport, suggesting its promise for research of electrically pumped organic lasers (EPOLs).

Vapor-Phase Living Assembly of π-Conjugated Organic Semiconductors

In contrast to well-studied amphiphilic block copolymers (BCPs) and π-stacked dyes, living assembly of hydrophobic π-conjugated materials has not yet been explored to date. Using a microspacing physical vapor transport (PVT) technique, the prefabricated microrods of organic semiconductors involving 9,10-dicyanoanthracene (DCA, A) or its binary alloy (B) can act as seeds to initiate living homoepitaxial growth from their ends, giving elongated microrods with controlled length. Red-green-red tricolor fluorescent microrod heterostructures with low dispersity are further realized by living heteroepitaxial growth of B microrod blocks on A seed microrod tips. Upon varying the growth sequence of each block, reverse triblock microrods are also accessible. Such a seed-induced living growth is applicable to triblock microrod heterostructures of more binary combinations as well as even more complex penta- and hepta-block heterostructures comprising A and B. By virtue of a convenient vapor-phase growth method, the present work demonstrates the generality of living assembly of π-conjugated materials.

Entropy-Gated Thermally Activated Delayed Emission Lifetime in Phenanthrene-Functionalized CsPbBr3 Perovskite Nanocrystals

Charge and electronic energy transfer form the basis of many natural and artificial energy transduction systems. The energy landscapes that drive these transfer processes are often constructed from enthalpy changes. In contrast, the entropic effect, although occasionally invoked to explain some excited-state dynamics, has rarely been used to actively control charge/energy flow. Here we derive a generic formula describing how entropy can quantitatively gate the thermally activated delayed emission lifetime in semiconductor nanocrystal-molecular triplet acceptor complexes and experimentally verify the model using highly emissive, quantum-confined CsPbBr₃ nanocrystals surface-functionalized with multiple phenanthrene triplet acceptors. Triplet energy transfer from photoexcited CsPbBr₃ nanocrystals to phenanthrene is followed by thermally activated repopulation of nanocrystal excitons, leading to delayed nanocrystal emission. The lifetime of delayed emission increases with the phenanthrene/nanocrystal ratio, due to lowering of the free energy of the acceptor state by entropic gain. This study points toward a direction of using entropy to artificially design donor-acceptor light-emitting materials with predetermined excited-state lifetimes.

Geometry-Programmable Perovskite Microlaser Patterns for Two-Dimensional Optical Encryption

Lasing signals with easily distinguishable readout and cavity-geometry-dependent output are emerging as novel cryptographic primitives for two-dimensional (2D) optical encryption, while their practical application is restricted by the challenge of integrating different lasing elements onto an identical 2D pattern. Herein, a lithographic template-confined crystallization approach was proposed to prepare large-scale perovskite microstructures with any desired geometries and locations, which enabled them to serve as 2D lasing patterns for reliable encryption and authentication. These prepatterned perovskite microstructures realized whispering-gallery-mode lasing and also demonstrated outstanding reproducibility of lasing actions. Benefiting from the feature of their cavity-geometry-dependent lasing thresholds, we achieved controllable laser output from different shaped elements, which was further utilized for the proof-of-concept demonstration of a cryptographic implementation. The remarkable lasing performance and feasible preparation of 2D microlaser patterns with customized geometries and locations provide us deep insights into the concepts and fabrication technologies for 2D optical encryption.

High Mobility Organic Lasing Semiconductor with Crystallization-Enhanced Emission for Light-Emitting Transistors

The development of high mobility organic laser semiconductors with strong emission is of great scientific and technical importance, but challenging. Herein, we present a high mobility organic laser semiconductor, 2,7-diphenyl-9H-fluorene (LD-1) showing unique crystallization-enhanced emission guided by elaborately modulating its crystal growth process. The obtained one-dimensional nanowires of LD-1 show outstanding integrated properties including: high absolute photoluminescence quantum yield (PLQY) approaching 80 %, high charge carrier mobility of 0.08 cm²  V^-1  s^-1 , Fabry-Perot lasing characters with a low threshold of 86 μJ cm^-2 and a high-quality factor of ≈2400. Furthermore, electrically induced emission was obtained from an individual LD-1 crystal nanowire-based light-emitting transistor due to the recombination of holes and electrons simultaneously injected into the nanowire, which provides a good platform for the study of electrically pumped organic lasers and other related ultrasmall integrated electrical-driven photonic devices.

Efficient enumeration of bosonic configurations with applications to the calculation of non-radiative rates

This work presents algorithms for the efficient enumeration of configuration spaces following Boltzmann-like statistics, with example applications to the calculation of non-radiative rates, and an open-source implementation. Configuration spaces are found in several areas of physics, particularly wherever there are energy levels that possess variable occupations. In bosonic systems, where there are no upper limits on the occupation of each level, enumeration of all possible configurations is an exceptionally hard problem. We look at the case where the levels need to be filled to satisfy an energy criterion, for example, a target excitation energy, which is a type of knapsack problem as found in combinatorics. We present analyses of the density of configuration spaces in arbitrary dimensions and how particular forms of kernel can be used to envelope the important regions. In this way, we arrive at three new algorithms for enumeration of such spaces that are several orders of magnitude more efficient than the naive brute force approach. Finally, we show how these can be applied to the particular case of internal conversion rates in a selection of molecules and discuss how a stochastic approach can, in principle, reduce the computational complexity to polynomial time.

Wettability-Guided Screen Printing of Perovskite Microlaser Arrays for Current-Driven Displays

Halide perovskites have shown tremendous potential for next-generation flat-panel laser displays due to their remarkable optoelectronic properties and outstanding material processability; however, the lack of a general approach for the fast growth of perovskite laser arrays capable of electrical operations impedes actualization of their display applications. Herein, a universal and robust wettability-guided screen-printing technique is reported for the rapid growth of large-scale multicolor perovskite microdisk laser arrays, which can serve as laser display panels and further be used to realize current-driven displays. The perovskite microlasers are precisely defined with controlled physical dimensions and spatial locations by such a printing strategy, and each perovskite microlaser serves as a pixel of a display panel. Moreover, the screen-printing procedure is highly compatible with light-emitting diode (LED) device architectures, which is favorable for the mass production of micro-LED arrays. On this basis, a prototype of a current-driven display is demonstrated with desired functionalities. The outstanding performance and feasible fabrication of screen-printed perovskite microlaser arrays embedded in LEDs provide deep insights into the concepts and device architectures of electrically driven laser display technology.

Organic Laser Molecule with High Mobility, High Photoluminescence Quantum Yield, and Deep-Blue Lasing Characteristics

Here, we design and synthesize an organic laser molecule, 2,7-diphenyl-9H-fluorene (LD-1), which has state-of-the-art integrated optoelectronic properties with a high mobility of 0.25 cm² V^-1 s^-1, a high photoluminescence quantum yield of 60.3%, and superior deep-blue laser characteristics (low threshold of P_th = 71 μJ cm^-2 and P_th = 53 μJ cm^-2 and high quality factor (Q) of ∼3100 and ∼2700 at emission peaks of 390 and 410 nm, respectively). Organic light-emitting transistors based on LD-1 are for the first time demonstrated with obvious electroluminescent emission and gate tunable features. This work opens the door for a new class of organic semiconductor laser molecules and is critical for deep-blue optical and laser applications.