Filamentous active matter: Band formation, bending, buckling, and defects

Density and inertia effects on two-dimensional active semiflexible filament suspensions

We examine the influence of density on the transition between chain and spiral structures in planar assemblies of active semiflexible filaments, utilizing detailed numerical simulations. We focus on how increased density, and higher Péclet numbers, affect the activity-induced transition spiral state in a semiflexible, self-avoiding active chain. Our findings show that increasing the density causes the spiral state to break up, reverting to a motile chain-like shape. This results in a density-dependent reentrant phase transition from spirals back to open chains. We attribute this phenomenon to an inertial effect observed at the single polymer level, where increased persistence length due to inertia has been shown in recent three-dimensional studies to cause polymers to open up. Our two-dimensional simulations further reveal that a reduction in the damping coefficient leads to partial unwinding of the spirals, forming longer arms. In suspension, interactions among these extended arms can trigger a complete unwinding of the spirals, driven by the combined effects of density and inertia.

Constrained motion of self-propelling eccentric disks linked by a spring

It has been supposed that the interplay of elasticity and activity plays a key role in triggering the non-equilibrium behaviors in biological systems. However, the experimental model system is missing to investigate the spatiotemporally dynamical phenomena. Here, a model system of an active chain, where active eccentric-disks are linked by a spring, is designed to study the interplay of activity, elasticity, and friction. Individual active chain exhibits longitudinal and transverse motions; however, it starts to self-rotate when pinning one end and self-beat when clamping one end. In addition, our eccentric-disk model can qualitatively reproduce such behaviors and explain the unusual self-rotation of the first disk around its geometric center. Furthermore, the structure and dynamics of long chains were studied via simulations without steric interactions. It was found that a hairpin conformation emerges in free motion, while in the constrained motions, the rotational and beating frequencies scale with the flexure number (the ratio of self-propelling force to bending rigidity), χ, as ∼(χ)4/3. Scaling analysis suggests that it results from the balance between activity and energy dissipation. Our findings show that topological constraints play a vital role in non-equilibrium synergy behaviors.

Structure and dynamics of motor-driven microtubule bundles

Connecting the large-scale emergent behaviors of active cytoskeletal materials to the microscopic properties of their constituents is a challenge due to a lack of data on the multiscale dynamics and structure of such systems. We approach this problem by studying the impact of depletion attraction on bundles of microtubules and kinesin-14 molecular motors. For all depletant concentrations, kinesin-14 bundles generate comparable extensile dynamics. However, this invariable mesoscopic behavior masks the transition in the microscopic motion of microtubules. Specifically, with increasing attraction, we observe a transition from bi-directional sliding with extension to pure extension with no sliding. Small-angle X-ray scattering shows that the transition in microtubule dynamics is concurrent with a structural rearrangement of microtubules from an open hexagonal to a compressed rectangular lattice. These results demonstrate that bundles of microtubules and molecular motors can display the same mesoscopic extensile behaviors despite having different internal structures and microscopic dynamics. They provide essential information for developing multiscale models of active matter.

Non-equilibrium structural and dynamic behaviors of active polymers in complex and crowded environments

Active matter systems, which convert internal chemical energy or energy from the environment into directed motion, are ubiquitous in nature and exhibit a range of emerging non-equilibrium behaviors. However, most of the current works on active matter have been devoted to particles, and the study of active polymers has only recently come into the spotlight due to their prevalence within living organisms. The intricate interplay between activity and conformational degrees of freedom gives rise to novel structural and dynamical behaviors of active polymers. Research in active polymers remarkably broadens diverse concepts of polymer physics, such as molecular architecture, dynamics, scaling and so on, which is of significant importance for the development of new polymer materials with unique performance. Furthermore, active polymers are often found in strongly interacting and crowded systems and in complex environments, so that the understanding of this behavior is essential for future developments of novel polymer-based biomaterials. This review thereby focuses on the study of active polymers in complex and crowded environments, and aims to provide insights into the fundamental physics underlying the adaptive and collective behaviors far from equilibrium, as well as the open challenges that the field is currently facing.

Conformation and dynamics of partially active linear polymers

We perform numerical simulations of isolated, partially active polymers, driven out-of-equilibrium by a fraction of their monomers. We show that, if the active beads are all gathered in a contiguous block, the position of the section along the chain determines the conformational and dynamical properties of the system. Notably, one can modulate the diffusion coefficient of the polymer from active-like to passive-like just by changing the position of the active block. Further, we show that a slight modification of the self-propulsion rule may give rise to an enhancement of diffusion under certain conditions, despite a decrease of the overall polymer activity. Our findings may help in the modelisation of active biophysical systems, such as filamentous bacteria or worms.

Formation and mechanics of fire ant rafts as an active self-healing membrane

The unique ability of fire ants to form a raft to survive flooding rain has enchanted biologists as well as researchers in other disciplines. It was established during the last decade that a three-dimensional aggregation of fire ants exhibits viscoelasticity with respect to external compression and shearing among numerous unusual mechanical properties. Continuing these works, we will study the ant raft in its natural form, i.e., composing no more than two layers. This allowed us to focus on the cracks that are unique to membranes and see how their patterns are influenced by the fact that these ants are mobile and can self-repair the damage to keep their raft from disintegration. In the beginning, we show that vertical and horizontal shaking can also prompt fire ants to aggregate. The canonical view that the stability of ant raft relies on the Cheerios effect and a combination of other parameters is tested. The force-displacement experiment is performed to show that two distinct mechanical responses and fracture patterns, characteristic of ductile and brittle materials, can be elicited, depending on the magnitude of the pull speed. During the process, we counted the number of ants that actively participated in the stress-strain relation and used this information to roughly sketch out the force chain. The latter information reveals that the pull force expedites the alignment of fire ants, in analogy to the effect of an electric field on liquid crystal polymers. To highlight the self-healing nature, we employ the creep experiment to study how the length and Young's modulus of the raft change or relax with time. One major finding is that the raft can exhibit zero Poisson's ratio without resorting to specific geometry structures. This is enabled by the active recruitment of ants from the top layer to the bottom layer to keep the raft from disintegrating.

Light-activated microtubule-based two-dimensional active nematic

We assess the ability of two light responsive kinesin motor clusters to drive dynamics of microtubule-based active nematics: opto-K401, a processive motor, and opto-K365, a non-processive motor. Measurements reveal an order of magnitude improvement in the contrast of nematic flow speeds between maximally- and minimally-illuminated states for opto-K365 motors when compared to opto-K401 construct. For opto-K365 nematics, we characterize both the steady-state flow and defect density as a function of applied light. We also examine the transient behavior as the system switches between steady-states upon changes in light intensities. Although nematic flows reach a steady state within tens of seconds, the defect density exhibits transient behavior for up to 10 minutes, showing a separation between small-scale active flows and system-scale structural states. Our work establishes an experimental platform that can exploit spatiotemporally-heterogeneous patterns of activity to generate targeted dynamical states.

Flow patterns and defect dynamics of active nematic liquid crystals under an electric field

The effects of an electric field on the flow patterns and defect dynamics of two-dimensional active nematic liquid crystals are numerically investigated. We found that field-induced director reorientation causes anisotropic active turbulence characterized by enhanced flow perpendicular to the electric field. The average flow speed and its anisotropy are maximized at an intermediate field strength. Topological defects in the anisotropic active turbulence are localized and show characteristic dynamics with simultaneous creation of two pairs of defects. A laning state characterized by stripe domains with alternating flow directions is found at a larger field strength near the transition to the uniformly aligned state. We obtained periodic oscillations between the laning state and active turbulence, which resembles an experimental observation of active nematics subject to anisotropic friction.

Rectified Rotational Dynamics of Mobile Inclusions in Two-Dimensional Active Nematics

We investigate the dynamics of mobile inclusions embedded in 2D active nematics. The interplay between the inclusion shape, boundary-induced nematic order, and autonomous flows powers the inclusion motion. Disks and achiral gears exhibit unbiased rotational motion, but with distinct dynamics. In comparison, chiral gear-shaped inclusions exhibit long-term rectified rotation, which is correlated with dynamics and polarization of nearby +1/2 topological defects. The chirality of defect polarities and the active nematic texture around the inclusion correlate with the inclusion's instantaneous rotation rate. Inclusions provide a promising tool for probing the rheological properties of active nematics and extracting ordered motion from their inherently chaotic motion.

Rectification of polymer translocation through nanopores by nonchiral and chiral active particles

We study translocation of a flexible polymer chain through a membrane pore under the influence of active forces and steric exclusion using Langevin dynamics simulations within a minimal two-dimensional model. The active forces on the polymer are imparted by nonchiral and chiral active particles that are introduced on one side or both sides of a rigid membrane positioned across the midline of a confining box. We show that the polymer can translocate through the pore to either side of the dividing membrane in the absence of external forcing. Translocation of the polymer to a given side of the membrane is driven (hindered) by an effective pulling (pushing) exerted by the active particles that are present on that side. The effective pulling results from accumulation of active particles around the polymer. This crowding effect signifies persistent motion of active particles causing prolonged detention times for them close to the confining walls and the polymer. The effective pushing that hinders the translocation, on the other hand, results from steric collisions that occur between the polymer and active particles. As a result of the competition between these effective forces, we find a transition between two rectified cis-to-trans and trans-to-cis translocation regimes. This transition is identified by a sharp peak in the average translocation time. The effects of active particles on the transition is studied by analyzing how the translocation peak is regulated by the activity (self-propulsion) strength of these particles, their area fraction, and chirality strength.

Self-mixing in microtubule-kinesin active fluid from nonuniform to uniform distribution of activity

Active fluids have applications in micromixing, but little is known about the mixing kinematics of systems with spatiotemporally-varying activity. To investigate, UV-activated caged ATP is used to activate controlled regions of microtubule-kinesin active fluid and the mixing process is observed with fluorescent tracers and molecular dyes. At low Péclet numbers (diffusive transport), the active-inactive interface progresses toward the inactive area in a diffusion-like manner that is described by a simple model combining diffusion with Michaelis-Menten kinetics. At high Péclet numbers (convective transport), the active-inactive interface progresses in a superdiffusion-like manner that is qualitatively captured by an active-fluid hydrodynamic model coupled to ATP transport. Results show that active fluid mixing involves complex coupling between distribution of active stress and active transport of ATP and reduces mixing time for suspended components with decreased impact of initial component distribution. This work will inform application of active fluids to promote micromixing in microfluidic devices.

Durability of Aligned Microtubules Dependent on Persistence Length Determines Phase Transition and Pattern Formation in Collective Motion

Collective motion is a ubiquitous phenomenon in nature. The collective motion of cytoskeleton filaments results mainly from dynamic collisions and alignments; however, the detailed mechanism of pattern formation still needs to be clarified. In particular, the influence of persistence length, which is a measure of filament flexibility, on collective motion is still unclear and lacks experimental verifications although it is likely to directly affect the orientational flexibility of filaments. Here, we investigated the collective motion of microtubules with different persistence lengths using a microtubule-kinesin motility system. We showed that local interactions between microtubules significantly vary depending on their persistence length. We demonstrated that the bundling of microtubules is enhanced by more durable alignment, rather than by greater likelihood of alignment. An agent-based computational model confirmed that the rigidity-dependent durability of microtubule alignment dominates their collective behavior.

Active Microphase Separation in Mixtures of Microtubules and Tip-Accumulating Molecular Motors

Mixtures of filaments and molecular motors form active materials with diverse dynamical behaviors that vary based on their constituents' molecular properties. To develop a multiscale of these materials, we map the nonequilibrium phase diagram of microtubules and tip-accumulating kinesin-4 molecular motors. We find that kinesin-4 can drive either global contractions or turbulentlike extensile dynamics, depending on the concentrations of both microtubules and a bundling agent. We also observe a range of spatially heterogeneous nonequilibrium phases, including finite-sized radial asters, 1D wormlike chains, extended 2D bilayers, and system-spanning 3D active foams. Finally, we describe intricate kinetic pathways that yield microphase separated structures and arise from the inherent frustration between the orientational order of filamentous microtubules and the positional order of tip-accumulating molecular motors. Our work reveals a range of novel active states. It also shows that the form of active stresses is not solely dictated by the properties of individual motors and filaments, but is also contingent on the constituent concentrations and spatial arrangement of motors on the filaments.

Active beating modes of two clamped filaments driven by molecular motors

Biological cilia pump the surrounding fluid by asymmetric beating that is driven by dynein motors between sliding microtubule doublets. The complexity of biological cilia raises the question about minimal systems that can re-create similar patterns of motion. One such system consists of a pair of microtubules that are clamped at the proximal end. They interact through dynein motors that cover one of the filaments and pull against the other one. Here, we study theoretically the static shapes and the active dynamics of such a system. Using the theory of elastica, we analyse the shapes of two filaments of different lengths with clamped ends. Starting from equal lengths, we observe a transition similar to Euler buckling leading to a planar shape. When further increasing the length ratio, the system assumes a non-planar shape with spontaneously broken chiral symmetry after a secondary bifurcation and then transitions to planar again. The predicted curves agree with experimentally observed shapes of microtubule pairs. The dynamical system can have a stable fixed point, with either bent or straight filaments, or limit cycle oscillations. The latter match many properties of ciliary motility, demonstrating that a two-filament system can serve as a minimal actively beating model.

Vesicle shape transformations driven by confined active filaments

In active matter systems, deformable boundaries provide a mechanism to organize internal active stresses. To study a minimal model of such a system, we perform particle-based simulations of an elastic vesicle containing a collection of polar active filaments. The interplay between the active stress organization due to interparticle interactions and that due to the deformability of the confinement leads to a variety of filament spatiotemporal organizations that have not been observed in bulk systems or under rigid confinement, including highly-aligned rings and caps. In turn, these filament assemblies drive dramatic and tunable transformations of the vesicle shape and its dynamics. We present simple scaling models that reveal the mechanisms underlying these emergent behaviors and yield design principles for engineering active materials with targeted shape dynamics.

Cluster and conquer: the morphodynamics of invasion of a compliant substrate by active rods

The colonisation of a soft passive material by motile cells such as bacteria is common in biology. The resulting colonies of the invading cells are often observed to exhibit intricate patterns whose morphology and dynamics can depend on a number of factors, particularly the mechanical properties of the substrate and the motility of the individual cells. We use simulations of a minimal 2D model of self-propelled rods moving through a passive compliant medium consisting of particles that offer elastic resistance before being plastically displaced from their equilibrium positions. It is observed that the clustering of active (self-propelled) particles is crucial for understanding the morphodynamics of colonisation. Clustering enables motile colonies to spread faster than they would have as isolated particles. The colonisation rate depends non-monotonically on substrate stiffness with a distinct maximum at a non-zero value of substrate stiffness. This is observed to be due to a change in the morphology of clusters. Furrow networks created by the active particles have a fractal-like structure whose dimension varies systematically with substrate stiffness but is less sensitive to particle activity. The power-law growth exponent of the furrowed area is smaller than unity, suggesting that, to sustain such extensive furrow networks, colonies must regulate their overall growth rate.

Defect Superdiffusion and Unbinding in a 2D XY Model of Self-Driven Rotors

We consider a nonequilibrium extension of the 2D XY model, equivalent to the noisy Kuramoto model of synchronization with short-range coupling, where rotors sitting on a square lattice are self-driven by random intrinsic frequencies. We study the static and dynamic properties of topological defects (vortices) and establish how self-spinning affects the Berezenskii-Kosterlitz-Thouless phase transition scenario. The nonequilibrium drive breaks the quasi-long-range ordered phase of the 2D XY model into a mosaic of ordered domains of controllable size and results in self-propelled vortices that generically unbind at any temperature, featuring superdiffusion ⟨r^{2}(t)⟩∼t^{3/2} with a Gaussian distribution of displacements. Our work provides a simple framework to investigate topological defects in nonequilibrium matter and sheds new light on the problem of synchronization of locally coupled oscillators.

Heterogeneous bacterial swarms with mixed lengths

Heterogeneous systems of active matter exhibit a range of complex emergent dynamical patterns. In particular, it is difficult to predict the properties of the mixed system based on its constituents. These considerations are particularly significant for understanding realistic bacterial swarms, which typically develop heterogeneities even when grown from a single cell. Here, mixed swarms of cells with different aspect ratios are studied both experimentally and in simulations. In contrast with previous theory, there is no macroscopic phase segregation. However, locally, long cells act as nucleation cites, around which aggregates of short, rapidly moving cells can form, resulting in enhanced swarming speeds. On the other hand, high fractions of long cells form a bottleneck for efficient swarming. Our results suggest a physical advantage for the spontaneous heterogeneity of bacterial swarm populations.

Synchronized oscillations, traveling waves, and jammed clusters induced by steric interactions in active filament arrays

Autonomous active, elastic filaments that interact with each other to achieve cooperation and synchrony underlie many critical functions in biology. The mechanisms underlying this collective response and the essential ingredients for stable synchronization remain a mystery. Inspired by how these biological entities integrate elasticity with molecular motor activity to generate sustained oscillations, a number of synthetic active filament systems have been developed that mimic oscillations of these biological active filaments. Here, we describe the collective dynamics and stable spatiotemporal patterns that emerge in such biomimetic multi-filament arrays, under conditions where steric interactions may impact or dominate the collective dynamics. To focus on the role of steric interactions, we study the system using Brownian dynamics, without considering long-ranged hydrodynamic interactions. The simulations treat each filament as a connected chain of self-propelling colloids. We demonstrate that short-range steric inter-filament interactions and filament roughness are sufficient - even in the absence of inter-filament hydrodynamic interactions - to generate a rich variety of collective spatiotemporal oscillatory, traveling and static patterns. We first analyze the collective dynamics of two- and three-filament clusters and identify parameter ranges in which steric interactions lead to synchronized oscillations and strongly occluded states. Generalizing these results to large one-dimensional arrays, we find rich emergent behaviors, including traveling metachronal waves, and modulated wavetrains that are controlled by the interplay between the array geometry, filament activity, and filament elasticity. Interestingly, the existence of metachronal waves is non-monotonic with respect to the inter-filament spacing. We also find that the degree of filament roughness significantly affects the dynamics - specifically, filament roughness generates a locking-mechanism that transforms traveling wave patterns into statically stuck and jammed configurations. Taken together, simulations suggest that short-ranged steric inter-filament interactions could combine with complementary hydrodynamic interactions to control the development and regulation of oscillatory collective patterns. Furthermore, roughness and steric interactions may be critical to the development of jammed spatially periodic states; a spatiotemporal feature not observed in purely hydrodynamically interacting systems.