A zinc-conducting chalcogenide electrolyte

Spatially Confined Engineering Toward Deep Eutectic Electrolyte in Metal-Organic Framework Enabling Solid-State Zinc-Ion Batteries

Uncontrollable interfacial side reactions generated from common aqueous electrolytes, just like the hydrogen evolution reaction (HER) and dendrite growth, have severely prevented the practical application of zinc-ion batteries (ZIBs). Solid-state ZIBs are considered to be an efficient strategy by adopting high-quality solid-state electrolytes (SSEs). Here, by confining deep eutectic electrolyte (DEE) into the nanochannels of metal-organic framework (MOF)-PCN-222, a stable DEE@PCN-222 SSE with internal Zn2+ transport channels was obtained. A distinctive ion-transport network composed of DEE and PCN-222 in the interior of DEE@PCN-222 realizes the efficient Zn2+ conduction, contributing to high ionic conductivity of 3.13×10-4 S cm-1 at room temperature, low activation energy of 0.12 eV, and a high Zn2+ transference number of 0.74. Furthermore, experimental and theoretical investigations demonstrate that DEE@PCN-222 with its unique channel structure could homogeneously regulate the Zn2+ distribution and effectively alleviate the side reactions. Highly reversible Zn plating/stripping performance of 2476 h can be realized by the SSE. The solid-state ZIBs show a specific capacity of 306 mAh g-1 and display cycling stability of 517 cycles. This unique design concept provides a new perspective in realizing the high-safety and high-performance ZIBs.

Customization of Manganese Oxide Cathodes via Precise Electrochemical Lithium-Ion Intercalation for Diverse Zinc-Ion Batteries

Manganese oxide-based aqueous zinc-ion batteries (ZIBs) are attractive energy storage devices, owing to their good safety, low cost, and ecofriendly features. However, various critical issues, including poor conductivity, sluggish reaction kinetics, and unstable structure still restrict their further development. Oxygen defect engineering is an effective strategy to improve the electrochemical performance of manganese oxides, but challenging in the accurate regulation of oxygen defects. In this work, an effective and controllable defect engineering strategy-controllable electrochemical lithium-ion intercalation - is proposed to tackle this issue. The incorporation of lithium ions and oxygen defects can promote the conductivity, lattice spacing, and structural stability of Mn2O3 (MO), thus improving its capacity (232.7 mAh g-1), rate performance, and long-term cycling stability (99.0% capacity retention after 3000 cycles). Interestingly, the optimal ratio of intercalated lithium-ion varies at different temperature or mass-loading of MO, which provides the possibility to customize diverse ZIBs to meet different application conditions. In addition, the fabricated ZIBs present good flexibility, superior safety, and admirable adaptability under extreme temperatures (-20-100 °C). This work provides an inspiration on the structural customization of metal oxide nanomaterials for diverse ZIBs, and sheds light on the construction of future portable electronics.

In Situ Formed Robust Solid Electrolyte Interphase with Organic-Inorganic Hybrid Layer for Stable Zn Metal Anode

Stabilizing the Zn anode/electrolyte interface is critical for advancing aqueous zinc ion storage technologies. Addressing this challenge helps minimize parasitic reactions and controls the formation of Zn dendrites, which is fundamental to achieving highly reversible Zn electrochemistry. In this study, 2% by volume of dimethyl sulfoxide (DMSO) is introduced into the baseline zinc sulfate (ZS) electrolyte, which acts as an efficient regulator to form a robust solid-electrolyte interphase (SEI) on the Zn anode. This innovative approach enables uniform Zn deposition and does not substantially modify the Zn2+ solvation structure. The Zn||Zn symmetric cell exhibits an extended cycle life of nearly one calendar year (>8500 h) at a current density of 0.5 mA cm-2 and an areal capacity of 0.5 mAh cm-2. Impressive full cell performance can be achieved. Specifically, the Zn||VS2 full cell achieves an areal capacity of 1.7 mAh cm-2, with a superior negative-to-positive capacity ratio of 2.5, and an electrolyte-to-capacity ratio of 101.4 µL mAh-1, displaying remarkable stability over 1000 cycles under a high mass loading of 11.0 mg cm-2 without significant degradation. This innovative approach in electrolyte engineering provides a new perspective on in situ SEI design and furthers the understanding of Zn anode stabilization.

Surface Patterning of Metal Zinc Electrode with an In-Region Zincophilic Interface for High-Rate and Long-Cycle-Life Zinc Metal Anode

The undesirable dendrite growth induced by non-planar zinc (Zn) deposition and low Coulombic efficiency resulting from severe side reactions have been long-standing challenges for metallic Zn anodes and substantially impede the practical application of rechargeable aqueous Zn metal batteries (ZMBs). Herein, we present a strategy for achieving a high-rate and long-cycle-life Zn metal anode by patterning Zn foil surfaces and endowing a Zn-Indium (Zn-In) interface in the microchannels. The accumulation of electrons in the microchannel and the zincophilicity of the Zn-In interface promote preferential heteroepitaxial Zn deposition in the microchannel region and enhance the tolerance of the electrode at high current densities. Meanwhile, electron aggregation accelerates the dissolution of non-(002) plane Zn atoms on the array surface, thereby directing the subsequent homoepitaxial Zn deposition on the array surface. Consequently, the planar dendrite-free Zn deposition and long-term cycling stability are achieved (5,050 h at 10.0 mA cm-2 and 27,000 cycles at 20.0 mA cm-2). Furthermore, a Zn/I2 full cell assembled by pairing with such an anode can maintain good stability for 3,500 cycles at 5.0 C, demonstrating the application potential of the as-prepared ZnIn anode for high-performance aqueous ZMBs.

Weakly Solvating Few-Layer-Carbon Interface toward High Initial Coulombic Efficiency and Cyclability Hard Carbon Anodes

The carbonaceous anodes in sodium ion batteries suffer from low initial Coulombic efficiency (ICE) and poor cyclability due to rampant solid electrolyte interface (SEI) growth. The concept of the weakly solvating electrolyte (WSE) has been popularized for SEI regulation on the anode by adjusting the cation solvation structure. Nevertheless, the effects on the solvation sheath from the electrode/electrolyte interface are ignored in most WSE applications. In this work, we extend the WSE from the bulk electrolyte to the electrolyte/carbon interface. By recycling asphalt wastes into sp2 C enriched few-layer carbon on hard carbon, a weakly solvating interface is fabricated with lower adsorption energy to electrolyte solvent molecules than a pristine anode (-0.89 vs -1.08 eV for Na/diglyme). Accordingly, more anionic groups are attracted into the solvent-weakened solvation sheath during sodiation (2.30 vs 1.96 coordination number for PF6-). The anion-mediated contact ion pairs facilitate a thin, inorganic-rich SEI layer with a homogeneous distribution, which confers a high ICE of 97.9% and a high capacity of 335.6 mA h g-1 at 1 C (89.5% retention, 1000 cycles). The full battery also manifests an energy density of 209 W h kg-1. This interfacial design is applicable in both ether- and ester-based electrolytes, which is promising in cost-effective modification for carbonaceous electrodes.

Phytic acid cross-linked and Hofmeister effect strengthened polyvinyl alcohol hydrogels for zinc ion storage

It is a big challenge to retain the water and thus reduce the charge impedance for solid electrolytes used in flexible and wearable zinc ion batteries. Here, we propose novel phytic acid (PA) cross-linked polyvinyl alcohol (PVA) hydrogels as high-performanced solid electrolytes strengthened by the Hofmeister effect. In this approach, freeze-thawing followed by a salting-out procedure via anions to induce the Hofmeister effect can greatly improve the tensile strain and flexibility of the hydrogels. The PA addition dramatically enhances the ionic conductivity and increases the affinity between the electrolyte and zinc plate. Consequently, the PVA/PA hydrogels exhibit remarkable electrochemical performances with stable full-cell cycling in zinc ion storage and capability in inhibiting Zn dendrite growth.

Zinc-copper dual-ion electrolytes to suppress dendritic growth and increase anode utilization in zinc ion capacitors

The main bottlenecks that hinder the performance of rechargeable zinc electrochemical cells are their limited cycle lifetime and energy density. To overcome these limitations, this work studied the mechanism of a dual-ion Zn-Cu electrolyte to suppress dendritic formation and extend the device cycle life while concurrently enhancing the utilization ratio of zinc and thereby increasing the energy density of zinc ion capacitors (ZICs). The ZICs achieved a best-in-class energy density of 41 watt hour per kilogram with a negative-to-positive (n/p) electrode capacity ratio of 3.10. At the n/p ratio of 5.93, the device showed a remarkable cycle life of 22,000 full charge-discharge cycles, which was equivalent to 557 hours of discharge. The cumulative capacity reached ~581 ampere hour per gram, surpassing the benchmarks of lithium and sodium ion capacitors and highlighting the promise of the dual-ion electrolyte for delivering high-performance, low-maintenance electrochemical energy supplies.

Li, Na, K, Mg, Zn, Al, and Ca Anode Interface Chemistries Developed by Solid-State Electrolytes

Solid-state batteries (SSBs) have received significant attention due to their high energy density, reversible cycle life, and safe operations relative to commercial Li-ion batteries using flammable liquid electrolytes. This review presents the fundamentals, structures, thermodynamics, chemistries, and electrochemical kinetics of desirable solid electrolyte interphase (SEI) required to meet the practical requirements of reversible anodes. Theoretical and experimental insights for metal nucleation, deposition, and stripping for the reversible cycling of metal anodes are provided. Ion transport mechanisms and state-of-the-art solid-state electrolytes (SEs) are discussed for realizing high-performance cells. The interface challenges and strategies are also concerned with the integration of SEs, anodes, and cathodes for large-scale SSBs in terms of physical/chemical contacts, space-charge layer, interdiffusion, lattice-mismatch, dendritic growth, chemical reactivity of SEI, current collectors, and thermal instability. The recent innovations for anode interface chemistries developed by SEs are highlighted with monovalent (lithium (Li+ ), sodium (Na+ ), potassium (K+ )) and multivalent (magnesium (Mg2+ ), zinc (Zn2+ ), aluminum (Al3+ ), calcium (Ca2+ )) cation carriers (i.e., lithium-metal, lithium-sulfur, sodium-metal, potassium-ion, magnesium-ion, zinc-metal, aluminum-ion, and calcium-ion batteries) compared to those of liquid counterparts.

Fine-Tuning Electrolyte Concentration and Metal-Organic Framework Surface toward Actuating Fast Zn2+ Dehydration for Aqueous Zn-Ion Batteries

Functional porous coating on zinc electrode is emerging as a powerful ionic sieve to suppress dendrite growth and side reactions, thereby improving highly reversible aqueous zinc ion batteries. However, the ultrafast charge rate is limited by the substantial cation transmission strongly associated with dehydration efficiency. Here, we unveil the entire dynamic process of solvated Zn2+ ions' continuous dehydration from electrolyte across the MOF-electrolyte interface into channels with the aid of molecular simulations, taking zeolitic imidazolate framework ZIF-7 as proof-of-concept. The moderate concentration of 2 M ZnSO4 electrolyte being advantageous over other concentrations possesses the homogeneous water-mediated ion pairing distribution, resulting in the lowest dehydration energy, which elucidates the molecular mechanism underlying such concentration adopted by numerous experimental studies. Furthermore, we show that modifying linkers on the ZIF-7 surface with hydrophilic groups such as -OH or -NH2 can weaken the solvation shell of Zn2+ ions to lower the dehydration free energy by approximately 1 eV, and may improve the electrical conductivity of MOF. These results shed light on the ions delivery mechanism and pave way to achieve long-term stable zinc anodes at high capacities through atomic-scale modification of functional porous materials.

Activating Gel Polymer Electrolyte Based Zinc-Ion Conduction with Filler-Integration for Advanced Zinc Batteries

Quasi solid zinc batteries (QSZBs) based on gel electrolyte have performed as a significant application prospect as advanced high energy density electrochemical storage devices with safety, low cost, eco-friendliness, and flexibility. While, the practical application of QSZBs was enormously restricted by low ionic conductivity and poor strength of pure gel electrolyte. Here, in order to activate the zinc ion conduction in gel electrolyte, the kinds of inorganic fillers constituting the composite electrolyte was investigated. The theoretical study was also revealed by density functional theory to have deep insight into the mechanism. In particular, appropriate filler amount (ZnO#20) can make a noteworthy ion conductivity elevation (1.3 × 10-3 S cm-1) which is much better than the control sample (2.0 × 10-4 S cm-1) at -20 °C. As a result, the symmetric cell with ZnO#20 can achieve a long-term cycling life of over 1500 h. Moreover, the pouch cell coupled with vanadium pentoxide is assembled, and corresponding versatility is also identified with twisting, refrigeration (-20 °C) and cutting.

A Heteroanionic Zinc Ion Conductor for Dendrite-Free Zn Metal Anodes

Although zinc-based batteries are promising candidates for eco-friendly and cost-effective energy storage devices, their performance is severely retarded by dendrite formation. As the simplest zinc compounds, zinc chalcogenides, and halides are individually applied as a Zn protection layer due to high zinc ion conductivity. However, the mixed-anion compounds are not studied, which constrains the Zn²⁺ diffusion in single-anion lattices to their own limits. A heteroanionic zinc ion conductor (Zn_y O_{1- x} F_x ) coating layer is designed by in situ growth method with tunable F content and thickness. Strengthened by F aliovalent doping, the Zn²⁺ conductivity is enhanced within the wurtzite motif for rapid lattice Zn migration. Zn_y O_{1- x} F_x also affords zincophilic sites for oriented superficial Zn plating to suppress dendrite growth. Therefore, Zn_y O_{1- x} F_x -coated anode exhibits a low overpotential of 20.4 mV for 1000 h cycle life at a plating capacity of 1.0 mA h cm^-2 during symmetrical cell test. The MnO₂ //Zn full battery further proves high stability of 169.7 mA h g^-1 for 1000 cycles. This work may enlighten the mixed-anion tuning for high-performance Zn-based energy storage devices.