A reversibly switching surface

Electrochemically driven physical properties of solid-state materials: action mechanisms and control schemes

The various physical properties recently induced by solid-state electrochemical reactions must be comprehensively understood, and their mechanisms of action should be elucidated. Reversible changes in conductivity, magnetism, and colour have been achieved by combining the redox reactions of d metal ions and organic materials, as well as the molecular and crystal structures of solids. This review describes the electrochemically driven physical properties of conductors, magnetic materials, and electrochromic materials using various electrochemical devices.

Bioinspired Interfacial Friction Control: From Chemistry to Structures to Mechanics

Organisms in nature have evolved a variety of surfaces with different tribological properties to adapt to the environment. By studying, understanding, and summarizing the friction and lubrication regulation phenomena of typical surfaces in nature, researchers have proposed various biomimetic friction regulation theories and methods to guide the development of new lubrication materials and lubrication systems. The design strategies for biomimetic friction/lubrication materials and systems mainly include the chemistry, surface structure, and mechanics. With the deepening understanding of the mechanism of biomimetic lubrication and the increasing application requirements, the design strategy of multi-strategy coupling has gradually become the center of attention for researchers. This paper focuses on the interfacial chemistry, surface structure, and surface mechanics of a single regulatory strategy and multi-strategy coupling approach. Based on the common biological friction regulation mechanism in nature, this paper reviews the research progress on biomimetic friction/lubrication materials in recent years, discusses and analyzes the single and coupled design strategies as well as their advantages and disadvantages, and describes the design concepts, working mechanisms, application prospects, and current problems of such materials. Finally, the development direction of biomimetic friction lubrication materials is prospected.

Electrical Chain Rearrangement: What Happens When Polymers in Brushes Have a Charge Gradient?

Under the influence of electric fields, the chains in polyelectrolyte brushes can stretch and collapse, which changes the structure of the brush. Copolymer brushes with charged and uncharged monomers display a similar behavior. For pure polyelectrolyte and random copolymer brushes, the field-induced structure changes only the density of the brush and not its local composition, while the latter could be affected if charges are distributed inhomogeneously along the polymer backbone. Therefore, we systematically study the switching behavior of gradient polyelectrolyte brushes in electric fields for different solvent qualities, grafting densities, and charges per chain via coarse-grained molecular dynamics simulations. Similar to random copolymers and pure polyelectrolytes, these brushes show a mixed-phase transition: intermediate states between fully stretched and collapsed are characterized by a bimodal chain-end distribution. Additionally, we find that the total charge of the brush plays a key role in the critical field required for a complete transition. Finally, we find that gradient polyelectrolyte brushes are charge-enriched at the brush-solvent interface under stretched conditions and charge-depleted under collapsed conditions, allowing for control over the local composition and thus the surface charge of the brush due to the inhomogeneous charge along the grafted chains.

Tailored Monolayers of N-Heterocyclic Carbenes by Kinetic Control

Despite the substantial success of N-heterocyclic carbenes (NHCs) as stable and versatile surface modification ligands, their use in nanoscale applications beyond chemistry is still hampered by the failure to control the carbene binding mode, which complicates the fabrication of monolayers with the desired physicochemical properties. Here, we applied vibrational sum-frequency generation spectroscopy to conduct a pseudokinetic surface analysis of NHC monolayers on Au thin films under ambient conditions. We observe for two frequently used carbene structures that their binding mode is highly dynamic and changes with the adsorption time. In addition, we demonstrate that this transition can be accelerated or decelerated to adjust the binding mode of NHCs, which allows fabrication of tailored monolayers of NHCs simply by kinetic control.

A reversible water-based electrostatic adhesive

Commercial adhesives typically fall into two categories: structural or pressure sensitive. Structural glues rely on covalent bonds formed during curing and provide high tensile strength whilst pressure-sensitive adhesives use physical bonding to provide weaker adhesion, but with considerable convenience for the user. Here, a new class of adhesive is presented that is also reversible, with a bond strength intermediate between those of pressure-sensitive and structural adhesives. Complementary water-based formulations incorporating oppositely charged polyelectrolytes form electrostatic bonds that may be reversed through immersion in a low or high pH aqueous environment. This electrostatic adhesive has the advantageous property that it exhibits good adhesion to low-energy surfaces such as polypropylene. Furthermore, it is produced by the emulsion copolymerization of commodity materials, styrene and butyl acrylate, which makes it inexpensive and opens the possibility of industrial production. Bio-based materials have been also integrated into the formulations to further increase sustainability. Moreover, unlike other water-based glues, adhesion does not significantly degrade in humid environments. Because such electrostatic adhesives do not require mechanical detachment, they are appropriate for the large-scale recycling of, e.g., bottle labels or food packaging. The adhesive is also suitable for dismantling components in areas as varied as automotive parts and electronics.

Enhanced CO2 Reactive Capture and Conversion Using Aminothiolate Ligand-Metal Interface

Metallic catalyst modification by organic ligands is an emerging catalyst design in enhancing the activity and selectivity of electrocatalytic carbon dioxide (CO2) reactive capture and reduction to value-added fuels. However, a lack of fundamental science on how these ligand-metal interfaces interact with CO2 and key intermediates under working conditions has resulted in a trial-and-error approach for experimental designs. With the aid of density functional theory calculations, we provided a comprehensive mechanism study of CO2 reduction to multicarbon products over aminothiolate-coated copper (Cu) catalysts. Our results indicate that the CO2 reduction performance was closely related to the alkyl chain length, ligand coverage, ligand configuration, and Cu facet. The aminothiolate ligand-Cu interface significantly promoted initial CO2 activation and lowered the activation barrier of carbon-carbon coupling through the organic (nitrogen (N)) and inorganic (Cu) interfacial active sites. Experimentally, the selectivity and partial current density of the multicarbon products over aminothiolate-coated Cu increased by 1.5-fold and 2-fold, respectively, as compared to the pristine Cu at -1.16 VRHE, consistent with our theoretical findings. This work highlights the promising strategy of designing the ligand-metal interface for CO2 reactive capture and conversion to multicarbon products.

Molecular Mechanism of Selective Al2O3 Atomic Layer Deposition on Self-Assembled Monolayers

Area-selective atomic layer deposition (AS-ALD) of insulating metallic oxide layers could be a useful nanopatterning technique for making increasingly complex semiconductor circuits. Although the alkanethiol self-assembled monolayer (SAM) has been considered promising as an ALD inhibitor, the low inhibition efficiency of the SAM during ALD processes makes its wide application difficult. We investigated the deposition mechanism of Al2O3 on alkanethiol-SAMs using temperature-dependent vibrational sum-frequency-generation spectroscopy. We found that the thermally induced formation of gauche defects in the SAMs is the main causative factor deteriorating the inhibition efficiency. Here, we demonstrate that a discontinuously temperature-controlled ALD technique involving self-healing and dissipation of thermally induced stress on the structure of SAM substantially enhances the SAM's inhibition efficiency and enables us to achieve 60 ALD cycles (6.6 nm). We anticipate that the present experimental results on the ALD mechanism on the SAM surface and the proposed ALD method will provide clues to improve the efficiency of AS-ALD, a promising nanoscale patterning and manufacturing technique.

Active Control of Contact Angles of Various Liquids from the Response of Self-Assembled Thiol Molecules to Electric Current

The ability to change wettability in situ would realize active surfaces that can change their functionality and adapt to different environments. This article reports a new and easy method that controls surface wettability in situ. In doing so, three hypotheses were to be proven. First, thiol molecules with dipole moments at the end that were adsorbed onto gold could change the contact angles of nonpolar or slightly polar liquids when an electric current was provided at the gold surface without having to ionize the dipole. It was also hypothesized that the molecules would undergo conformation changes as their dipoles would align with the magnetic field induced by the applied current. Second, the ability to change contact angles was modified by mixing ethanethiol, a much shorter thiol with no dipole, with the abovementioned thiol molecules because it would provide space for the thiol molecules to undergo conformation changes. Third, the indirect evidence of the conformation change was verified with attenuated total reflection Fourier transform infrared (FT-IR) spectroscopy. Four thiol molecules that controlled the contact angles of deionized water and hydrocarbon liquids were identified. The abilities of those four molecules in changing the contact angles were modified by adding ethanethiol. A quartz crystal microbalance was used to infer the possible change in the distance between the adsorbed thiol molecules by investigating adsorption kinetics. The changes in FT-IR peaks with respect to applied currents were also presented as indirect evidence for the conformation change. This method was compared with other reported methods that control wettability in situ. The differences between the voltage-driven method to induce conformation changes of thiol molecules and the method presented in this paper were further discussed to emphasize that the mechanism by which the conformation change was induced in this article was most likely because of the dipole-electric current interaction.

Understanding the Two-Dimensional Mixing Behavior of 1-Naphthalenethiol and Octanethiol

A two-dimensional (2D) mixture in the form of a self-assembled monolayer composed of two distinct organothiol compounds was created by sequentially depositing 1-naphthalenethiol (1NT) and octanethiol (OT) on a gold surface. By varying the sequence of deposition, two mixed surface systems were created. The surface structure of the resulting mixed monolayer was characterized with Scanning Tunneling Microscopy (STM) and showed surface disorder across all investigated domains. Elemental analysis was carried out with X-ray Photoelectron Spectroscopy (XPS) and indicated that the 1NT monolayer was prone to significant oxidation. Reductive desorption (RD) was used to characterize the binding strength and electrochemical environments of the molecular components in the mixture, and confirmed disordered molecular layers. Due to the presence of oxidized species in the 1NT monolayer, 1NT was displaced by OT resulting in a novel surface structure composed of either OT or 1NT. Monolayers of OT that were exposed to a solution of 1NT resulted in disordered surface structures with a significant amount of gold vacancy islands. To date, there is no experimental phase diagram explaining the chemical behavior of two-dimensional mixtures. This study addresses the need for an experimental understanding of the phase behavior of mixed organothiol self-assembled monolayers (SAMs).

Adhesive Interfaces toward a Zero-Waste Industry

This Feature Article evaluates ongoing efforts to adapt adhesives toward the goal of zero-waste living and suggests the most promising future directions. Adhesives are not always considered in zero-waste manufacturing because they represent only a small fraction of a product and offer no additional functionality. However, their presence restricts the reintegration of constituent parts into a circular economy, so a new generation of adhesives is required. Furthermore, their production often leads to harmful pollutants. Here, two main approaches toward addressing these problems are considered: first, the use of natural materials that replace petroleum-based polymers from which conventional adhesives are made and second, the production of dismantlable adhesives capable of debonding on demand with the application of an external stimulus. These approaches, either individually or combined, offer a new paradigm in zero-waste industrial production and consumer applications.

A Happy Get-Together - Probing Electrochemical Interfaces by Non-Linear Vibrational Spectroscopy

Electrochemical interfaces are key structures in energy storage and catalysis. Hence, a molecular understanding of the active sites at these interfaces, their solvation, the structure of adsorbates, and the formation of solid-electrolyte interfaces are crucial for an in-depth mechanistic understanding of their function. Vibrational sum-frequency generation (VSFG) spectroscopy has emerged as an operando spectroscopic technique to monitor complex electrochemical interfaces due to its intrinsic interface sensitivity and chemical specificity. Thus, this review discusses the happy get-together between VSFG spectroscopy and electrochemical interfaces. Methodological approaches for answering core issues associated with the behavior of adsorbates on electrodes, the structure of solvent adlayers, the transient formation of reaction intermediates, and the emergence of solid electrolyte interphase in battery research are assessed to provide a critical inventory of highly promising avenues to bring optical spectroscopy to use in modern material research in energy conversion and storage.

A Novel ZnO Nanoparticles Enhanced Surfactant Based Viscoelastic Fluid Systems for Fracturing under High Temperature and High Shear Rate Conditions: Synthesis, Rheometric Analysis, and Fluid Model Derivation

Surfactant-based viscoelastic (SBVE) fluids are innovative nonpolymeric non-newtonian fluid compositions that have recently gained much attention from the oil industry. SBVE can replace traditional polymeric fracturing fluid composition by mitigating problems arising during and after hydraulic fracturing operations are performed. In this study, SBVE fluid systems which are entangled with worm-like micellar solutions of cationic surfactant: cetrimonium bromide or CTAB and counterion inorganic sodium nitrate salt are synthesized. The salt reagent concentration is optimized by comparing the rheological characteristics of different concentration fluids at 25 °C. The study aims to mitigate the primary issue concerning these SBVE fluids: significant drop in viscosity at high temperature and high shear rate (HTHS) conditions. Hence, the authors synthesized a modified viscoelastic fluid system using ZnO nanoparticle (NPs) additives with a hypothesis of getting fluids with improved rheology. The rheology of optimum fluids of both categories: with (0.6 M NaNO₃ concentration fluid) and without (0.8 M NaNO₃ concentration fluid) ZnO NPs additives were compared for a range of shear rates from 1 to 500 Sec⁻¹ at different temperatures from 25 °C to 75 °C to visualize modifications in viscosity values after the addition of NPs additives. The rheology in terms of viscosity was higher for the fluid with 1% dispersed ZnO NPs additives at all temperatures for the entire range of shear rate values. Additionally, rheological correlation function models were derived for the synthesized fluids using statistical analysis methods. Subsequently, Herschel–Bulkley models were developed for optimum fluids depending on rheological correlation models. In the last section of the study, the pressure-drop estimation method is described using given group equations for laminar flow in a pipe depending on Herschel–Bulkley-model parameters have been identified for optimum fluids are consistency, flow index and yield stress values.

Switchable Adhesion: On-Demand Bonding and Debonding

Adhesives have a long and illustrious history throughout human history. The development of synthetic polymers has highly improved adhesions in terms of their strength and environmental tolerance. As soft robotics, flexible electronics, and intelligent gadgets become more prevalent, adhesives with changeable adhesion capabilities will become more necessary. These adhesives should be programmable and switchable, with the ability to respond to light, electromagnetic fields, thermal, and other stimuli. These requirements necessitate novel concepts in adhesion engineering and material science. Considerable studies have been carried out to develop a wide range of adhesives. This review focuses on stimuli-responsive material-based adhesives, outlining current research on switchable and controlled adhesives, including design and manufacturing techniques. Finally, the potential for smart adhesives in applications, and the development of future adhesive forms are critically suggested.

Superelongation of Liquid Metal

The ability to control interfacial tension electrochemically is uniquely available for liquid metals (LMs), in particular gallium-based LM alloys. This imparts them with excellent locomotion and deformation capabilities and enables diverse applications. However, electrochemical oxidation of LM is a highly dynamic process, which often induces Marangoni instabilities that make it almost impossible to elongate LM and manipulate its morphology directly and precisely on a 2D plane without the assistance of other patterning methods. To overcome these limitations, this study investigates the use of an LM-iron (Fe) particle mixture that is capable of suppressing instabilities during the electrochemical oxidation process, thereby allowing for superelongation of the LM core of the mixture to form a thin wire that is tens of times of its original length. More importantly, the elongated LM core can be manipulated freely on a 2D plane to form complex patterns. Eliminating Marangoni instabilities also allows for the effective spreading and filling of the LM-Fe mixture into molds with complex structures and small features. Harnessing these excellent abilities, a channel-less patterning method for fabricating elastomeric wearable sensors is demonstrated to detect motions. This study shows the potential for developing functional and flexible structures of LM with superior performance.

Programmable Multistimuli-Responsive and Multimodal Polymer Actuator Based on a Designed Energy Transduction Network

A polymer actuator typically responds to only one or two types of stimuli, where sensing and actuation are simultaneously exerted by the same responsive polymer. In cells, sensing and actuation are exerted separately by different biomolecules, which are integrated into nanoscale assemblies to construct the signaling network, making cells a multistimuli responsive and multimodal system. Inspired by the structure-function relationship of the signaling network in cells, we have developed a strategy to select and assemble proper functional polymers into assemblies, where sensing and actuation are exerted by different polymers, and the assemblies can present novel functions beyond that of each polymer component. Three polymers [polyaniline, PANi; poly(N-isopropylacrylamide), PNIPAm; and polydimethylsiloxane, PDMS] are integrated as nodes into a simple energy transduction network, which can be regulated by three molecular factors (pH, kosmotropic anions, and polyethylene glycol). PANi converts the light or electric stimulus into heat, which triggers the actuation of PNIPAm and PDMS. Relying on this energy transduction network, the polymer assembly can respond to six types of stimuli (light, electricity, temperature, water, ions, and organic solvents) and perform different actuation modes, serving as a powerful actuator. Programmable complex deformation upon multiple simultaneous or sequential stimuli has also been achieved by this actuator. An adaptive gripper to catch thin objects and a self-regulating switch to maintain environmental humidity illustrate the wide potential of this actuator for next-generation smart materials and soft robots.

Controlling amphipathic peptide adsorption by smart switchable germanium interfaces

The in situ control of reversible protein adsorption to a surface is a critical step towards biofouling prevention and finds utilisation in bioanalytical applications. In this work, adsorption of peptides is controlled by employing the electrode potential induced, reversible change of germanium (100) surface termination between a hydrophobic, hydrogen terminated and a hydrophilic, hydroxyl terminated surface. This simple but effective 'smart' interface is used to direct adsorption of two peptides models, representing the naturally highly abundant structural motifs of amphipathic helices and coiled-coils. Their structural similarity coincides with their opposite overall charge and hence allows the examination of the influence of charge and hydrophobicity on adsorption. Polarized attenuated total reflection infrared (ATR-IR) spectroscopy at controlled electrode potential has been used to follow the adsorption process at physiological pH in deuterated buffer. The delicate balance of hydrophobic and electrostatic peptide/surface interactions leads to two different processes upon switching that are both observed in situ: reversible adsorption and reversible reorientation. Negatively charged peptide adsorption can be fully controlled by switching to the hydrophobic interface, while the same switch causes the positively charged, helical peptide to tilt down. This principle can be used for 'smart' adsorption control of a wider variety of proteins and peptides and hence find application, as e.g. a bioanalytical tool or functional biosensor.

Molecular-sized outward-swinging gate: Experiment and theoretical analysis of a locally nonchaotic barrier

We investigate the concept of molecular-sized outward-swinging gate, which allows for entropy decrease in an isolated system. The theoretical analysis, the Monte Carlo simulation, and the direct solution of governing equations all suggest that under the condition of local nonchaoticity, the probability of particle crossing is asymmetric. It is demonstrated by an experiment on a nanoporous membrane one-sidedly surface-grafted with bendable organic chains. Remarkably, through the membrane, gas spontaneously and repeatedly flows from the low-pressure side to the high-pressure side. While this phenomenon seems counterintuitive, it is compatible with the principle of maximum entropy. The locally nonchaotic gate interrupts the probability distribution of the local microstates, and imposes additional constraints on the global microstates, so that entropy reaches a nonequilibrium maximum. Such a mechanism is fundamentally different from Maxwell's demon and Feynman's ratchet, and is consistent with microscopic reversibility. It implies that useful work may be produced in a cycle from a single thermal reservoir. A generalized form of the second law of thermodynamics is proposed.

Unexpected hydrophobicity on self-assembled monolayers terminated with two hydrophilic hydroxyl groups

Current major approaches to access surface hydrophobicity include directly introducing hydrophobic nonpolar groups/molecules onto the surface or elaborately fabricating surface roughness. Here, for the first time, molecular dynamics simulations show an unexpected hydrophobicity with a contact angle of 82° on a flexible self-assembled monolayer terminated only with two hydrophilic OH groups ((OH)₂-SAM). This hydrophobicity, verified by a water slip phenomenon characterizing the friction on the (OH)₂-SAM surface, is attributed to the formation of a hexagonal-ice-like H-bonding structure in the OH matrix of (OH)₂-SAM, which sharply reduces the hydrogen bonds between the surface and the water molecules above. The unique simple interface presented here offers a significant molecular-level platform for examining the bio-interfacial interactions ranging from biomolecule binding to cell adhesion.

Computational and data driven molecular material design assisted by low scaling quantum mechanics calculations and machine learning

Electronic structure methods based on quantum mechanics (QM) are widely employed in the computational predictions of the molecular properties and optoelectronic properties of molecular materials. The computational costs of these QM methods, ranging from density functional theory (DFT) or time-dependent DFT (TDDFT) to wave-function theory (WFT), usually increase sharply with the system size, causing the curse of dimensionality and hindering the QM calculations for large sized systems such as long polymer oligomers and complex molecular aggregates. In such cases, in recent years low scaling QM methods and machine learning (ML) techniques have been adopted to reduce the computational costs and thus assist computational and data driven molecular material design. In this review, we illustrated low scaling ground-state and excited-state QM approaches and their applications to long oligomers, self-assembled supramolecular complexes, stimuli-responsive materials, mechanically interlocked molecules, and excited state processes in molecular aggregates. Variable electrostatic parameters were also introduced in the modified force fields with the polarization model. On the basis of QM computational or experimental datasets, several ML algorithms, including explainable models, deep learning, and on-line learning methods, have been employed to predict the molecular energies, forces, electronic structure properties, and optical or electrical properties of materials. It can be conceived that low scaling algorithms with periodic boundary conditions are expected to be further applicable to functional materials, perhaps in combination with machine learning to fast predict the lattice energy, crystal structures, and spectroscopic properties of periodic functional materials.

Droplets on substrates with oscillating wettability

In recent decades novel solid substrates have been designed which change their wettability in response to light or an electrostatic field. Here, we investigate a droplet on substrates with oscillating uniform wettability by varying minimum and maximum contact angles and frequency. To simulate this situation, we use our previous work [Grawitter and Stark, Soft Matter, 2021, 17, 2454], where we implemented the boundary element method in combination with the Cox-Voinov law for the contact-line velocity, to determine the fluid flow inside a droplet. After a transient regime the droplet performs steady oscillations, the amplitude of which decreases with increasing frequency. For slow oscillations our numerical results agree well with the linearized spherical-cap model. They collapse on a master curve when we rescale frequency by a characteristic relaxation time. In contrast, for fast oscillations we observe significant deviations from the master curve. The decay of the susceptibility is weaker and the phase shift between oscillations in wettability and contact angle stays below the predicted π/2. The reason becomes obvious when studying the combined dynamics of droplet height and contact angle. It reveals non-reciprocal shape changes during one oscillation period even at low frequencies due to the induced fluid flow inside the droplet, which are not captured by the spherical-cap model. Similar periodic non-reciprocal shape changes occur at low frequencies when the droplet is placed on an oscillating nonuniform wettability profile with six-fold symmetry. Such profiles are inspired by the light intensity pattern of Laguerre-Gauss laser modes. Since the non-reciprocal shape changes induce fluid circulation, which is controllable from the outside, our findings envisage the design of targeted microfluidic transport of solutes inside the droplet.

Performance Improvement of Triplet-Triplet Annihilation-Based Upconversion Solid Films through Plasmon-Induced Backward Scattering of Periodic Arrays of Ag and Al

The performance improvement of solid-state triplet-triplet annihilation-based photon upconversion (TTA-UC) systems is required for the application to various solar devices. The performance can be improved by making use of the local strong electric field generated through the excitation of localized surface plasmon (LSP) resonance of metal nanostructures. However, since the improvement is effective only within the limited nanospace around nanoparticles (i.e., the near-field effect), a methodology for improving the performance over a wider spatial region is desirable. In this study, a significant improvement in the threshold light excitation intensity (I_th) (77% decrease) as the figure of merit and the upconverted emission intensity (6.3 times enhancement) in a solid-state TTA-UC film with a thickness of 3 μm was achieved by stacking the film with periodic Ag half-shell arrays. The highest-enhanced upconverted emission was obtained by tuning the diffuse reflectance peak, which results from the excitation of LSP resonance of the Ag half-shell arrays, to overlap well with the photoexcitation peak of the sensitizer in the TTA-UC film. The intensity of the enhanced upconverted emission was independent of the distance between the lower edge of the TTA-UC film and the surface of half-shell arrays in the nanometer order. These results suggest that the performance improvement was attributed to the photoexcitation enhancement of the sensitizer by elongating the excitation light path length inside the TTA-UC film, which was achieved through a strong backward scattering of the incident light based on the LSP resonance excitation (i.e., the far-field effect). In addition, the upconverted emission was improved using half-shell arrays comprising low-cost Al, although the enhancement factor was 3.5, which was lower than that of Ag half-shell arrays. The lower enhancement may be attributed to a decrease in the backward scattering of the excitation light owing to the intrinsic strong interband transition of Al at long visible wavelengths.

Hydrothermally treated titanium surfaces for enhanced osteogenic differentiation of adipose derived stem cells

Implant surface plays a crucial role in improving osseointegration and long-term implant life. When the implant comes in contact with the bone tissue, the bone marrow mesenchymal cells interact with the implant surface and the surface properties such as morphology, wettability, mechanical properties and chemistry influences cell migration, proliferation and differentiation. Different surface modification strategies such as ceramic coatings, surface dealloying, and surface topography modifications for improving osteointegration have been investigated. However, studies have not yet established which of the surface property is more influential. In this study, titanium surfaces were treated hydrothermally with sodium hydroxide and sulfuric acid separately. This treatment led to the development of two unique surface topography at nanoscale. These modified surfaces were characterized for surface morphology, wettability, chemistry, and crystallinity. Cytotoxicity, cell adhesion, proliferation, morphology, and differentiation of adipose derived stem cells on modified surfaces was investigated. The results indicate that wettability does influence initial cell adhesion. However, the surface morphology can play major role in cell spreading, proliferation and differentiation. The results indicate that titanium surfaces treated hydrothermally with sodium hydroxide led to a nanoporous architecture that promoted appropriate cell interaction with the surface promoting osteoblastic lineage.

A Method for Preparing Superhydrophobic Paper with High Stability and Ionic Liquid-Induced Wettability Transition

In this study, the polymer PTSPM-PMETAC with anion adsorption properties was prepared by a one-step method, then the amino-modified nano-SiO2 was grafted onto the polymer to improve the roughness of the surface and enhance the stability of superhydrophobic properties, and a high-stability superhydrophobic paper with ion-induced wettability transition properties was successfully prepared. The study found that the paper can realize the reversible control of surface wettability through the exchange between the anions PF6- and Cl- adsorbed on the surface of PMETAC, and further investigation of the effect of different solvents on the ion exchange properties found that water was the poor solvent for ion exchange, while the mixtures of methanol, acetone, and methanol & water were the good solvent. On the whole, the preparation of superhydrophobic paper by this method not only simple in preparation process, low in cost and strong in universality, but also the prepared superhydrophobic paper has high transparency and good stability, which has great application potential in industrial production.

Electroactive Biomaterials and Systems for Cell Fate Determination and Tissue Regeneration: Design and Applications

During natural tissue regeneration, tissue microenvironment and stem cell niche including cell-cell interaction, soluble factors, and extracellular matrix (ECM) provide a train of biochemical and biophysical cues for modulation of cell behaviors and tissue functions. Design of functional biomaterials to mimic the tissue/cell microenvironment have great potentials for tissue regeneration applications. Recently, electroactive biomaterials have drawn increasing attentions not only as scaffolds for cell adhesion and structural support, but also as modulators to regulate cell/tissue behaviors and function, especially for electrically excitable cells and tissues. More importantly, electrostimulation can further modulate a myriad of biological processes, from cell cycle, migration, proliferation and differentiation to neural conduction, muscle contraction, embryogenesis, and tissue regeneration. In this review, endogenous bioelectricity and piezoelectricity are introduced. Then, design rationale of electroactive biomaterials is discussed for imitating dynamic cell microenvironment, as well as their mediated electrostimulation and the applying pathways. Recent advances in electroactive biomaterials are systematically overviewed for modulation of stem cell fate and tissue regeneration, mainly including nerve regeneration, bone tissue engineering, and cardiac tissue engineering. Finally, the significance for simulating the native tissue microenvironment is emphasized and the open challenges and future perspectives of electroactive biomaterials are concluded.

Optomechanical controlling of intermolecular interaction and the application in molecular self-assembly

In this paper, we combined cavity optomechanics and quantum mechanical mechanism of van der Waals force to study the dynamic behavior of interacting bimolecules in the plasmonic localized field, and extend it to the interacting multi-molecular system. We explored how plasmonic optomechanical coupling affects the strength of intermolecular interactions. Based on our results, we propose to use optical field to modulate the intermolecular interaction potential in plasmonic cavity, which can be utilized in the enhancement of the efficiency of the molecular self-assembly process and controlling the yield of the reaction in an optical environment. This research extends molecular optomechanics from intramolecular interactions to intermolecular interactions and may has high application potential in some nanostructure synthesis.

In Situ Electric-Induced Switchable Transparency and Wettability on Laser-Ablated Bioinspired Paraffin-Impregnated Slippery Surfaces

Switchable wetting and optical properties on a surface is synergistically realized by mechanical or temperature stimulus. Unfortunately, in situ controllable wettability together with programmable transparency on 2D/3D surfaces is rarely explored. Herein, Joule-heat-responsive paraffin-impregnated slippery surface (JR-PISS) is reported by the incorporation of lubricant paraffin, superhydrophobic micropillar-arrayed elastomeric membrane, and embedded transparent silver nanowire thin-film heater. Owing to its good flexibility, in situ controllable locomotion for diverse liquids on planar/curved JR-PISS is unfolded by alternately applying/discharging low electric-trigger of 6 V. Simultaneously, optical visibility can be reversibly converted between opaque and transparent modes. The switching principle is that in the presence of Joule-heat, solid paraffin would be melt and swell within 20 s to enable a slippery surface for decreasing light scattering and frictional force derived from contact angle hysteresis (FCAH ). Once Joule-heat is discharged, undulating rough surface would reconfigure by cold-shrinkage of paraffin within 8 s to render light blockage and high FCAH . Upon its portable merit, in situ thermal management, programmable visibility, as well as steering functionalized droplets by electric-activated JR-PISSs are successfully deployed. Compared with previous Nepenthes-inspired slippery surfaces, the current JR-PISS is more competent for in situ harnessing optical and wetting properties on-demand.

A temperature switchable pyridyl-zinc(II) side arm porphyrin with functionality for surface immobilisation

A pyridyl side arm porphyrin incorporating C[Formula: see text] alkyl chains at the periphery of the porphyrin suitable for surface immobilisation on HOPG has been synthesised and tested for two state switching in solution. Temperature switching, involving reversible complexation of a covalently appended pyridyl side arm to the Zn(II) porphyrin, was comprehensively characterised by using variable temperature 1H NMR (-30 to +100[Formula: see text]C) and UV-vis (10 to 90[Formula: see text]C) in toluene. Molecular modelling assisted in understanding strain within the complex.

Smart Bionic Surfaces with Switchable Wettability and Applications

In order to satisfy the needs of different applications and more complex intelligent devices, smart control of surface wettability will be necessary and desirable, which gradually become a hot spot and focus in the field of interface wetting. Herein, we review interfacial wetting states related to switchable wettability on superwettable materials, including several classical wetting models and liquid adhesive behaviors based on the surface of natural creatures with special wettability. This review mainly focuses on the recent developments of the smart surfaces with switchable wettability and the corresponding regulatory mechanisms under external stimuli, which is mainly governed by the transformation of surface chemical composition and geometrical structures. Among that, various external stimuli such as physical stimulation (temperature, light, electric, magnetic, mechanical stress), chemical stimulation (pH, ion, solvent) and dual or multi-triggered stimulation have been sought out to realize the regulation of surface wettability. Moreover, we also summarize the applications of smart surfaces in different fields, such as oil/water separation, programmable transportation, anti-biofouling, detection and delivery, smart soft robotic etc. Furthermore, current limitations and future perspective in the development of smart wetting surfaces are also given. This review aims to offer deep insights into the recent developments and responsive mechanisms in smart biomimetic surfaces with switchable wettability under external various stimuli, so as to provide a guidance for the design of smart surfaces and expand the scope of both fundamental research and practical applications.

A Programmable Toolkit to Dynamically Signal Cells Using Peptide Strand Displacement

The native extracellular matrix communicates and interacts with cells by dynamically displaying signals to control their behavior. Mimicking this dynamic environment in vitro is essential in order to unravel how cell-matrix interactions guide cell fate. Here, we present a synthetic platform for the temporal display of cell-adhesive signals using coiled-coil peptides. By designing an integrin-engaging coiled-coil pair to have a toehold (unpaired domain), we were able to use a peptide strand displacement reaction to remove the cell cue from the surface. This allowed us to test how the user-defined display of RGDS ligands at variable duration and periodicity of ligand exposure influence cell spreading degree and kinetics. Transient display of α_Vβ₃-selective ligands instructed fibroblast cells to reversibly spread and contract in response to changes in ligand exposure over multiple cycles, exhibiting a universal kinetic response. Also, cells that were triggered to spread and contract repeatedly exhibited greater enrichment of integrins in focal adhesions versus cells cultured on persistent RGDS-displaying surfaces. This dynamic platform will allow us to uncover the molecular code by which cells sense and respond to changes in their environment and will provide insights into ways to program cellular behavior.

Facile Electrochemical Method for the Fabrication of Stable Corrosion-Resistant Superhydrophobic Surfaces on Zr-Based Bulk Metallic Glasses

Both surface microstructure and low surface energy modification play a vital role in the preparation of superhydrophobic surfaces. In this study, a safe and simple electrochemical method was developed to fabricate superhydrophobic surfaces of Zr-based metallic glasses with high corrosion resistance. First, micro–nano composite structures were generated on the surface of Zr-based metallic glasses by electrochemical etching in NaCl solution. Next, stearic acid was used to decrease surface energy. The effects of electrochemical etching time on surface morphology and wettability were also investigated through scanning electron microscopy and contact angle measurements. Furthermore, the influence of micro–nano composite structures and roughness on the wettability of Zr-based metallic glasses was analysed on the basis of the Cassie–Baxter model. The water contact angle of the surface was 154.3° ± 2.2°, and the sliding angle was <5°, indicating good superhydrophobicity. Moreover, the potentiodynamic polarisation test and electrochemical impedance spectroscopy suggested excellent corrosion resistance performance, and the inhibition efficiency of the superhydrophobic surface reached 99.6%. Finally, the prepared superhydrophobic surface revealed excellent temperature-resistant and self-cleaning properties.

Aβ aggregation behavior at interfaces with switchable wettability: a bioinspired perspective to understand amyloid formation

An amphiphilic taurocholic acid (TCA) doped polypyrrole (PPy) film (PPy/TCA) was used as a dynamic mimic membrane model to explore how switchable surface wettability influences amyloid aggregation. Our results indicate that the hydrophobic surface, not the hydrophilic surface, plays important roles in Aβ40 adsorption and aggregation.

Tailoring Materials for Modulation of Macrophage Fate

Human immune system acts as a pivotal role in the tissue homeostasis and disease progression. Immunomodulatory biomaterials that can manipulate innate immunity and adaptive immunity hold great promise for a broad range of prophylactic and therapeutic purposes. This review is focused on the design strategies and principles of immunomodulatory biomaterials from the standpoint of materials science to regulate macrophage fate, such as activation, polarization, adhesion, migration, proliferation, and secretion. It offers a comprehensive survey and discussion on the tunability of material designs regarding physical, chemical, biological, and dynamic cues for modulating macrophage immune response. The range of such tailorable cues encompasses surface properties, surface topography, materials mechanics, materials composition, and materials dynamics. The representative immunoengineering applications selected herein demonstrate how macrophage-immunomodulating biomaterials are being exploited for cancer immunotherapy, infection immunotherapy, tissue regeneration, inflammation resolution, and vaccination. A perspective on the future research directions of immunoregulatory biomaterials is also provided.

Capillary Effect Enhancement in a Plastic Capillary Tube by Nanostructured Surface

We investigated the enhancement of the capillary effect in a plastic capillary tube using only a nanostructured surface. Since plastic is a hydrophobic material, the capillary effect does not emerge without an additional coating or plasma treatment process. Therefore, capillary effect enhancement by the nanostructure fabrication method is expected to reduce the cost and minimise the contamination produced in the human body. By combining a hydrophilic nylon resin and a nanostructure at the tip of the plastic pipette, we could confirm that the capillary effect was produced solely by the tube fabrication process. The produced capillary effect increased linearly with increasing nanostructure height when a standard solution with a surface tension of 70 mN·m⁻¹ was used. Thus, we can conclude that including the plastic part with nanostructure can be useful for biomedical applications. In addition, we suggest that the proposed method is highly effective in controlling the wetting properties of plastic surfaces, compared to the typical coating or plasma treatment processes.

A Critical Review of Membrane Wettability in Membrane Distillation from the Perspective of Interfacial Interactions

Hydrophobic membranes used in membrane distillation (MD) systems are often subject to wetting during long-term operation. Thus, it is of great importance to fully understand factors that influence the wettability of hydrophobic membranes and their impact on the overall separation efficiency that can be achieved in MD systems. This Critical Review summarizes both fundamental and applied aspects of membrane wetting with particular emphasis on interfacial interaction between the membrane and solutes in the feed solution. First, the theoretical background of surface wetting, including the relationship between wettability and interfacial interaction, definition and measurement of contact angle, surface tension, surface free energy, adhesion force, and liquid entry pressure, is described. Second, the nature of wettability, membrane wetting mechanisms, influence of membrane properties, feed characteristics and operating conditions on membrane wetting, and evolution of membrane wetting are reviewed in the context of an MD process. Third, specific membrane features that increase resistance to wetting (e.g., superhydrophobic, omniphobic, and Janus membranes) are discussed briefly followed by the comparison of various cleaning approaches to restore membrane hydrophobicity. Finally, challenges with the prevention of membrane wetting are summarized, and future work is proposed to improve the use of MD technology in a variety of applications.

Superwetting Shape Memory Microstructure: Smart Wetting Control and Practical Application

Smart control of wettability on superwetting surfaces has aroused much attention in the past few years. Compared with traditional strategies such as adjusting the surface chemistry, regulating the surface microstructure is more difficult, though it can bring lots of new functions. Recently, it was found that, based on the shape memory effect of a shape memory polymer, the surface microstructure can be controlled more easily and precisely. Here, recent developments in the smart control of wettability on superwetting shape memory microstructures and corresponding applications are summarized. The primary concern is the superhydrophobic surfaces that have demonstrated numerous attractive functions, including controllable droplet storage, transportation, bouncing, capture/release, and reprogrammable gradient wetting, under variation of the surface microstructure. Finally, some achievements in wetting control on other superwetting surfaces (such as superomniphobic surfaces and superslippery surfaces) and perspectives on future research directions are also discussed.

Mass Fabrication of 3D Silicon Nano-/Microstructures by Fab-Free Process Using Tip-Based Lithography

Methods for the mass fabrication of 3D silicon (Si) microstructures with a 100 nm resolution are developed using scanning probe lithography (SPL) combined with metal-assisted chemical etching (MACE). Protruding Si structures, including Si nanowires of over 10 µm in length and atypical shaped Si nano- and micropillars, are obtained via the MACE of a patterned gold film (negative tone) on Si substrates by dip-pen nanolithography (DPN) with polymer or by nanoshaving alkanethiol self-assembled monolayers (SAMs). Furthermore, recessed Si structures with arbitrary patterning and channels less than 160 nm wide and hundreds of nanometers in depth are obtained via the MACE of a patterned gold film (positive tone) on Si substrates by alkanethiol DPN. As an example of applications using protruded Si structures, nanoimprinting in an area of up to a centimeter is demonstrated through 1D and 2D SPL combined with MACE. Similarly, submicrometer polydimethylsiloxane (PDMS) stamps are employed over millimeter-scale areas for applications using recessed Si structures. In particular, the mass production of arbitrarily shaped Si microparticles at submicrometer resolution is developed using silicon-on-insulator substrates, as demonstrated using optical microresonators, surface-enhanced Raman scattering templates, and smart microparticles for fluorescence signal coding.

Molecular-Structure-Induced Under-Liquid Dual Superlyophobic Surfaces

Surfaces with under-water superoleophobicity or under-oil superhydrophobicity have attractive features due to their widespread applications. However, it is difficult to achieve under-liquid dual superlyophobic surfaces, that is, under-oil superhydrophobicity and under-water superoleophobicity coexistence, due to the thermodynamic contradiction. Herein, we report an approach to obtain the under-liquid dual superlyophobic surface through conformational transitions of surface self-assembled molecules. Preferential exposure of either hydrophobic or hydrophilic moieties of the hydroxythiol (HS(CH₂)_nOH, where n is the number of methylene groups) self-assembled monolayers to the surrounding solvent (water or oil) can be used to manipulate macroscopic wettability. In water, the surfaces modified with different hydroxythiols exhibit under-water superoleophobicity because of the exposure of hydroxyl groups. In contrast, surface wettability to water is affected by molecular orientation in oil, and the surface transits from under-oil superhydrophilicity to superhydrophobicity when n ≥ 4. This surface design can amplify the molecular-level conformational transition to the change of macroscopic surface wettability. Furthermore, on-demand oil/water separation relying on the under-liquid dual superlyophobicity is successfully demonstrated. This work may be useful in developing the materials with opposite superwettability.

Probing the electrode-solution interfaces in rechargeable batteries by sum-frequency generation spectroscopy

An in-depth understanding of the electrode-electrolyte interaction and electrochemical reactions at the electrode-solution interfaces in rechargeable batteries is essential to develop novel electrolytes and electrode materials with high performance. In this perspective, we highlight the advantages of the interface-specific sum-frequency generation (SFG) spectroscopy on the studies of the electrode-solution interface for the Li-ion and Li-O₂ batteries. The SFG studies in probing solvent adsorption structures and solid-electrolyte interphase formation for the Li-ion battery are briefly reviewed. Recent progress on the SFG study of the oxygen reaction mechanisms and stability of the electrolyte in the Li-O₂ battery is also discussed. Finally, we present the current perspective and future directions in the SFG studies on the electrode-electrolyte interfaces toward providing deeper insight into the mechanisms of discharging/charging and parasitic reactions in novel rechargeable battery systems.

Programming Multiphase Media Superwetting States in the Oil-Water-Air System: Evolutions in Hydrophobic-Hydrophilic Surface Heterogeneous Chemistry

Studies toward tailoring macroscopic extreme wetting behaviors on a certain well-defined surface in multiphase media are significant but still at an infant stage. Herein, superantiwetting evolutions in the oil-water-air system can be programmed from single to quadruple superrepellence by controlling the surface hydrophobic-hydrophilic heterogeneous chemistry. Ammonia vapor exposure makes the realization of challenging superhydrophilicity-superoleophobicity possible in air medium, causing the transition from quadruple to triple superantiwetting states in the oil-water-air system. Upon UV illumination, only single superrepellence-underwater superoleophobicity is maintained on titanium dioxide (TiO₂, P25)-based coatings. A reversible transition between underoil superhydrophilicity and superhydrophobicity via an alternating UV irradiation and heating process leads to a switching between "water-absorbing" and "size-sieving" effects in water-in-oil emulsion separation. A comparative study for investigating two such effects in emulsion separation is further investigated. The current conceptual insights not only extend superwetting states to multiphase media, but can also deepen the understanding of the relationship between macroscopic extreme wetting behaviors and surface chemistry.

Molecular dynamics simulation of CO2-switchable surfactant regulated reversible emulsification/demulsification processes of a dodecane-saline system

CO2-Switchable surfactants are of great potential in a wide range of industrial applications related to their ability to stabilize and destabilize emulsions upon command. Molecular dynamics simulations have been performed to reveal the fundamental mechanism of the reversible emulsification/demulsification processes of a dodecane-saline system by a CO2-switchable surfactant that switches between active (i.e., N'-dodecyl-N,N-dimethylacetamidinium (DMAAH+)) and inactive (i.e., N'-dodecyl-N,N-dimethylacetamidine (DMAA)) forms. The density profiles indicate that DMAAH+ could increase the oil-water interfacial thickness to a greater extent compared to DMAA. DMAAH+ could sharply reduce the interfacial tension of the dodecane-saline system, while DMAA only exhibits a limited decrease, which is in accordance with the experimental observation that DMAAH+/DMAA can reversibly emulsify/demulsify alkane-water systems. Our simulations showed that both the number and lifetime of hydrogen bonds (HBs) between DMAA and water are almost equal to those between DMAAH+ and water. In DMAA, the N atom connecting with the alkyl tail acted as a HB acceptor, while the N atom attached by a proton in DMAAH+ acted as a HB donor. Furthermore, the HBs between DMAAH+ and HCO3- at the interfaces are relatively limited. Hence, it is deduced that the HBs are insufficient to achieve the CO2-switchability of DMAA/DMAAH+. The Lennard Jones and coulombic potentials between DMAA/DMAAH+ and other species show that the coulombic potentials between DMAAH+ and water or anions (i.e., Cl- and HCO3-) sharply decrease with the increase of DMAAH+ and are much lower than those in models with DMAA. The enhanced coulombic interactions between DMAAH+ and anions lead to a remarkable reduction in interfacial tension and the emulsification of the alkane-saline system. Therefore, coulombic interactions are of crucial importance to the reversible emulsification/demulsification processes regulated by CO2-switchable surfactants, namely DMAAH+/DMAA.

Electro-inductive effect: Electrodes as functional groups with tunable electronic properties

In place of functional groups that impose different inductive effects, we immobilize molecules carrying thiol groups on a gold electrode. By applying different voltages, the properties of the immobilized molecules can be tuned. The base-catalyzed saponification of benzoic esters is fully inhibited by applying a mildly negative voltage of –0.25 volt versus open circuit potential. Furthermore, the rate of a Suzuki-Miyaura cross-coupling reaction can be changed by applying a voltage when the arylhalide substrate is immobilized on a gold electrode. Finally, a two-step carboxylic acid amidation is shown to benefit from a switch in applied voltage between addition of a carbodiimide coupling reagent and introduction of the amine.