Oxygen-Substituted Porous C2N Frameworks as Efficient Electrocatalysts for Carbon Dioxide Electroreduction

The electrochemical carbon dioxide reduction reaction (CO2RR) provides a green avenue for decarbonizing the conventional chemical industries. Here, a structure-selectivity relationship of catalysts is pivotal for the control of a highly selective and active CO2RR pathway. We report the fabrication of an oxygen-substituted C2N as metal-free catalyst (O─C2N) for electrochemical CO2─to─CO conversion with tunable O microenvironment. Combined spectroscopic analysis reveals a fine tailored N─C─O moiety in O─C2N, where C─O─C species (e.g., ring in-plane ether) become the dominant oxygen configurations at higher pyrolysis temperatures. Based on experimental observations, a correlation between the exocyclic O-substituted N─C─O─C moieties and CO selectivity is established, giving clear chemical tools for active structure design. The optimized O─C2N electrocatalysts with the dominant appearance of C─O─C moieties exhibit an outstanding 2e- CO2RR performance with a CO selectivity up to 94.8%, which can be well maintained in a practical flow-cell reactor with an adjustable syngas feature.

N-Doped Carbon Nanotubes as Metal-Free Catalysts for PAA Activation to degrade emerging pollutants: Exploration of Reaction Mechanisms and Prediction of Active Sites

In this study, we utilized urea as a nitrogen precursor and synthesized a series of nitrogen-doped carbon nanotubes with varying catalytic activities for PAA by adjusting the mass ratio of urea to carbon nanotubes (ranging from 0.01:1 to 2:1) and the preparation temperature (between 400°C and 1000°C). The activation mechanism was thoroughly examined through extensive characterization and calculations. During the activation process with PAA, we observed that the removal of contaminants was linearly correlated with the extent of graphitization (R2=0.873) and the degree of nitrogen doping (R2=0.951). These findings were further corroborated by density functional theory (DFT) calculations. Different types of nitrogen atoms can reduce the peroxide-breaking energy barrier in PAA to varying degrees, thereby facilitating the conversion of NCNT-PAA* complexes into adsorbed hydroxyl radicals. The system achieves an impressive 100% oxidative removal of 20 μM micropollutants (e.g., bisphenol A) within 60 minutes, thanks to the synergistic effects of electron transfer and radical adsorption. Furthermore, it maintains a remarkable micropollutant removal rate of nearly 80% after five consecutive uses. Additionally, carbon materials can be effectively integrated with membrane filtration, which not only facilitates the recycling of carbon materials in practical applications but also enhances the catalytic efficiency of nitrogen-doped multi-walled carbon nanotubes (NCNTs) while ensuring the safety of the effluent. These results underscore the extensive application prospects and research potential of carbon-based materials, while also providing a novel approach for the advanced oxidation technology of PAA.

Increasing the local electron density of carbons for enhanced O2 activation at room temperature

Room-temperature activation of O2 into a super dioxide radical (O2˙-) is a crucial step in oxidation processes. Here, the concept of tuning the local electron density of carbons is adopted to develop highly efficient catalysts for molecular oxygen activation. We demonstrate that the π electron of sp2 carbons is essential for activating O2 with the assistance of ultra-micropores, while varying defects or functional groups induce local electron rearrangement of carbons, thereby altering their catalytic capacity. Electron rich non-metallic doping can increase the local electron intensity of modified carbons with improved oxygen activation. In addition, transition-metal-sp2-carbon nano-composites that readily surrender electrons are constructed, achieving O2˙- formation without spatial confinement. Our findings provide fundamental insights into the intrinsic mechanism of O2 activation and offer a general protocol for the design and development of advanced carbon catalysts for low-temperature oxidations.

Biomolecule-derived three-dimensional N, P co-doped carbon nanosheets for the efficient oxidative dehydrogenation of propane

Non-metallic heteroatom-doped carbon materials are promising catalysts for the oxidative dehydrogenation of propane (ODHP), but their controlled synthesis remains challenging. Herein, a novel three-dimensional N, P co-doped carbon nanosheet (NPC-NS-T) catalyst is prepared, which shows an impressive catalytic performance in the ODHP reaction with high propane conversion (20.0%) and high selectivity for propene (62.1%) and olefins (64.5%) at 500 °C along with good long-time stability. Comprehensive experimental characterizations revealed that incorporation of appropriate P can not only help to form more CO species on the surface of NPC-NS-T but also inhibit the consumption of CO species under ODHP conditions, thereby remarkably improving the catalytic performance. This work could pave the way for developing efficient biomass-derived carbon catalysts for the oxidative dehydrogenation reactions of propane.

Pickering Emulsions Biocatalysis: Recent Developments and Emerging Trends

Biocatalysis within biphasic systems is gaining significant attention in the field of synthetic chemistry, primarily for its ability to solve the problem of incompatible solubilities between biocatalysts and organic compounds. By forming an emulsion from these two-phase systems, a larger surface area is created, which greatly improves the mass transfer of substrates to the biocatalysts. Among the various types of emulsions, Pickering emulsions stand out due to their excellent stability, compatibility with biological substances, and the ease with which they can be formed and separated. This makes them ideal for reusing both the emulsifiers and the biocatalysts. This review explores the latest developments in biocatalysis using Pickering emulsions. It covers the structural features, methods of creation, innovations in flow biocatalysis, and the role of interfaces in these processes. Additionally, the challenges and future directions are discussed in combining chemical and biological catalysts within Pickering emulsion frameworks to advance synthetic methodologies.

Borocarbonitride Catalyzed Ethylbenzene Oxidative Dehydrogenation: Activity Enhancement via Encapsulation of Mn Clusters inside the Tube

Borocarbonitride (BCN) catalysts, boasting multiple redox sites, have shown considerable potential in alkane oxidative dehydrogenation (ODH) to olefin molecules. However, their catalytic efficiency still lags behind that of leading commercial catalysts, primarily due to the limited reactivity of oxygen functional groups. In this study, a groundbreaking hybrid catalyst is developed, featuring BCN nanotubes (BCNNTs) encapsulated with manganese (Mn) clusters, crafted through a meticulous supramolecular self-assembly and postcalcination strategy. This novel catalyst demonstrates a remarkable enhancement in activity, achieving 30% conversion and ≈100% selectivity toward styrene in ethylbenzene ODH reactions. Notably, its performance surpasses both pure BCNNTs and those hosting Mn nanoparticles. Structural and kinetic analyses unveil a robust interaction between BCNNTs and the Mn component, substantially boosting the catalytic activity of BCNNTs. Furthermore, density functional theory (DFT) calculations elucidate that BCNNTs encapsulated with Mn clusters not only stabilize key intermediates (─B─O─O─B─) but also enhance the nucleophilicity of active sites through electron transfer from the Mn cluster to the BCNNTs. This electron transfer mechanism effectively lowers the energy barrier for ─C─H cleavage, resulting in a 13% improvement in catalytic activity compared to pure BCNNTs.

Hydroxyl radical-mediated synthesis of carbonyl functionalized graphene quantum dots-like as enzyme mimics with tunable fluorescence emission

The synthesis of graphene quantum dots-like enriched with specific oxygenated groups (o-GQDs) exhibiting great catalytic performance offers a promising tool for diagnosis and biomedicine, but introducing specific oxygen groups remains a challenge. Here, we propose a mild synthetic protocol for producing regulated fluorescence emission (from blue to yellow) carbonyl functionalized GQDs with double catalytic function through Fe3O4-catalyzed hydroxyl radical (·OH) oxidation the precursors like graphene oxide, polyaniline (PANI) and polydopamine (PDA). The method can be carried out at room temperature than the traditional high-temperature oxidation in concentrated acid. Interestingly, o-GQDs exhibit excellent peroxidase (POD)- and ascorbate oxidase-like activity. XPS characterization showed a significant increase in carbonyl content in o-GQDs compared to the precursor, even a 14-fold increase in blue-emitting iron-doped GQDs (b-Fe-GQDs). The introduction of Fe3O4 during the synthesis process results in a minor degree of Fe doping, which enhances the catalytic activity of b-Fe-GQDs through coordination with N. Based on this feature, highly sensitive single-signal and ultra-selective dual-signal methods for alkaline phosphatase detection were developed. This low cost and safe synthesis strategy paves the way for practical usage of o-GQDs.

Carbon-Boosted and Nitrogen-Stabilized Isolated Single-Atom Sites for Direct Dehydrogenation of Lower Alkanes

Lower olefins are widely used in the chemical industry as basic carbon-based feedstocks. Here, we report the catalytic system featuring isolated single-atom sites of iridium (Ir1) that can function within the entire temperature range of 300-600 °C and transform alkanes with conversions close to thermodynamics-dictated levels. The high turnover frequency values of the Ir1 system are comparable to those of homogeneous catalytic reactions. Experimental data and theoretical calculations both indicate that Ir1 is the primary catalytic site, while the coordinating C and N atoms help to enhance the activity and stability, respectively; all three kinds of elements cooperatively contribute to the high performance of this novel active site. We have further immobilized this catalyst on particulate Al2O3, and we found that the resulting composite system under mimicked industrial conditions could still give high catalytic performances; in addition, we have also developed and established a new scheme of periodical in situ regeneration specifically for this composite particulate catalyst.

Revisiting the phosphonium salt chemistry for P-doped carbon synthesis: toward high phosphorus contents and beyond the phosphate environment

The introduction of phosphorus and nitrogen atoms in carbo-catalysts is a common way to tune the electronic density, and thereby the reactivity, of the material, as well as to introduce surface reactive sites. Numerous environments are reported for the N atoms, but the P-doping chemistry is less explored and focuses on surface POx groups. A one-step synthesis of P/N-doped carbonaceous materials is presented here, using affordable and industrially available urea and tetrakis(hydroxymethyl)phosphonium chloride (THPC) as the N and P sources, respectively. In contrast to most of the synthetic pathways toward P-doped carbonaceous materials, the THPC precursor only displays P-C bonds along the carbon backbone. This resulted in unusual phosphorus environments for the materials obtained from direct thermal treatment of THPC-urea, presumably of type C-P-N according to 31P NMR and XPS. Alternatively, the in situ polymerization and calcination of the precursors were run in calcium chloride hydrate, used as a combined reaction medium and porogen agent. Following this salt-templating strategy led to particularly high phosphorus contents (up to 18 wt%), associated with porosities up to 600 m2 g-1. The so-formed P/N-doped porous materials were employed as metal-free catalysts for the mild oxidative dehydrogenation of N-heterocycles to N-heteroarenes at room temperature and in air.

Ru/GCN Nanocomposite as an Efficient Catalyst for Hydrogen Generation from Sodium Hypophosphite

Sodium hypophosphite is a promising green source for generating clean elemental hydrogen without pollutants. This study presents the development of an efficient heterogeneous catalyst, Ru/g-C3N4 (Ru/GCN), for hydrogen generation from sodium hypophosphite. The Ru/GCN catalyst demonstrates excellent activity under mild reaction conditions and maintains its effectiveness over multiple cycles without significant loss of activity. This easily separable and recyclable heterogeneous catalyst is straightforward to operate, non-toxic, eco-friendly, and provides a cost-effective alternative to the extensive use of expensive noble metals, which have limited industrial applications. The Ru/GCN catalyst was characterized using various material characterization and spectral methods, including powder X-ray diffraction (PXRD), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS), and X-ray photoelectron spectroscopy (XPS). Hypophosphite, combined with the catalytically active and recyclable Ru/GCN catalyst, forms a system with high potential for industrial-scale hydrogen production, suggesting promising avenues for further research and application.

Emerging Two-Dimensional Carbonaceous Materials for Electrocatalytic Energy Conversions: Rational Design of Active Structures through High-Temperature Chemistry

Electrochemical energy conversion and storage technologies involving controlled catalysis provide a sustainable way to handle the intermittency of renewable energy sources, as well as to produce green chemicals/fuels in an ecofriendly manner. Core to such technology is the development of efficient electrocatalysts with high activity, selectivity, long-term stability, and low costs. Here, two-dimensional (2D) carbonaceous materials have emerged as promising contenders for advancing the chemistry in electrocatalysis. We review the emerging 2D carbonaceous materials for electrocatalysis, focusing primarily on the fine engineering of active structures through thermal condensation, where the design, fabrication, and mechanism investigations over different types of active moieties are summarized. Interestingly, all the recipes creating two-dimensionality on the carbon products also give specific electrocatalytic functionality, where the special mechanisms favoring 2D growth and their consequences on materials functionality are analyzed. Particularly, the structure-activity relationship between specific heteroatoms/defects and catalytic performance within 2D metal-free electrocatalysts is highlighted. Further, major challenges and opportunities for the practical implementation of 2D carbonaceous materials in electrocatalysis are summarized with the purpose to give future material design guidelines for attaining desirable catalytic structures.

Recent Advances in Mechanistic Understanding of Metal-Free Carbon Thermocatalysis and Electrocatalysis with Model Molecules

Metal-free carbon, as the most representative heterogeneous metal-free catalysts, have received considerable interests in electro- and thermo-catalytic reactions due to their impressive performance and sustainability. Over the past decade, well-designed carbon catalysts with tunable structures and heteroatom groups coupled with various characterization techniques have proposed numerous reaction mechanisms. However, active sites, key intermediate species, precise structure-activity relationships and dynamic evolution processes of carbon catalysts are still rife with controversies due to the monotony and limitation of used experimental methods. In this Review, we summarize the extensive efforts on model catalysts since the 2000s, particularly in the past decade, to overcome the influences of material and structure limitations in metal-free carbon catalysis. Using both nanomolecule model and bulk model, the real contribution of each alien species, defect and edge configuration to a series of fundamentally important reactions, such as thermocatalytic reactions, electrocatalytic reactions, were systematically studied. Combined with in situ techniques, isotope labeling and size control, the detailed reaction mechanisms, the precise 2D structure-activity relationships and the rate-determining steps were revealed at a molecular level. Furthermore, the outlook of model carbon catalysis has also been proposed in this work.

Water-induced strong isotropic MXene-bridged graphene sheets for electrochemical energy storage

Graphene and two-dimensional transition metal carbides and/or nitrides (MXenes) are important materials for making flexible energy storage devices because of their electrical and mechanical properties. It remains a challenge to assemble nanoplatelets of these materials at room temperature into in-plane isotropic, free-standing sheets. Using nanoconfined water-induced basal-plane alignment and covalent and π-π interplatelet bridging, we fabricated Ti3C2Tx MXene-bridged graphene sheets at room temperature with isotropic in-plane tensile strength of 1.87 gigapascals and moduli of 98.7 gigapascals. The in-plane room temperature electrical conductivity reached 1423 siemens per centimeter, and volumetric specific capacity reached 828 coulombs per cubic centimeter. This nanoconfined water-induced alignment likely provides an important approach for making other aligned macroscopic assemblies of two-dimensional nanoplatelets.

Low-Temperature Propane Activation and Mineralization over a Co3O4 Sub-nanometer Porous Sheet: Atomic-Level Insights

Light alkanes make up a class of widespread volatile organic compounds (VOCs), bringing great environmental hazards and health concerns. However, the low-temperature catalytic destruction of light alkanes is still a great challenge to settle due to their high reaction inertness and weak polarity. Herein, a Co3O4 sub-nanometer porous sheet (Co3O4-SPS) was fabricated and comprehensively compared with its bulk counterparts in the catalytic oxidation of C3H8. Results demonstrated that abundant low-coordinated Co atoms on the Co3O4-SPS surface boost the activation of adsorbed oxygen and enhance the catalytic activity. Moreover, Co3O4-SPS has better surface metal properties, which is beneficial to electron transfer between the catalyst surface and the reactant molecules, promoting the interaction between C3H8 molecules and dissociated O atoms and facilitating the activation of C-H bonds. Due to these, Co3O4-SPS harvests a prominent performance for C3H8 destruction, 100% of which decomposed at 165 °C (apparent activation energy of 49.4 kJ mol-1), much better than the bulk Co3O4 (450 °C and 126.9 kJ mol-1) and typical noble metal catalysts. Moreover, Co3O4-SPS also has excellent thermal stability and water resistance. This study deepens the atomic-level insights into the catalytic capacity of Co3O4-SPS in light alkane purification and provides references for designing efficacious catalysts for thermocatalytic oxidation reactions.

Electrosynthesis of Hydrogen Peroxide through Selective Oxygen Reduction: A Carbon Innovation from Active Site Engineering to Device Design

Electrochemical synthesis of hydrogen peroxide (H2 O2 ) through the selective oxygen reduction reaction (ORR) offers a promising alternative to the energy-intensive anthraquinone method, while its success relies largely on the development of efficient electrocatalyst. Currently, carbon-based materials (CMs) are the most widely studied electrocatalysts for electrosynthesis of H2 O2 via ORR due to their low cost, earth abundance, and tunable catalytic properties. To achieve a high 2e- ORR selectivity, great progress is made in promoting the performance of carbon-based electrocatalysts and unveiling their underlying catalytic mechanisms. Here, a comprehensive review in the field is presented by summarizing the recent advances in CMs for H2 O2 production, focusing on the design, fabrication, and mechanism investigations over the catalytic active moieties, where an enhancement effect of defect engineering or heteroatom doping on H2 O2 selectivity is discussed thoroughly. Particularly, the influence of functional groups on CMs for a 2e- -pathway is highlighted. Further, for commercial perspectives, the significance of reactor design for decentralized H2 O2 production is emphasized, bridging the gap between intrinsic catalytic properties and apparent productivity in electrochemical devices. Finally, major challenges and opportunities for the practical electrosynthesis of H2 O2 and future research directions are proposed.

Surface Chemistry and Catalytic Reactivity of Borocarbonitride in Oxidative Dehydrogenation of Propane

Borocarbonitride (BCN) materials are newly developed oxidative dehydrogenation catalysts that can efficiently convert alkanes to alkenes. However, BCN materials tend to form bulky B2 O3 due to over-oxidation at the high reaction temperature, resulting in significant deactivation. Here, we report a series of super stable BCN nanosheets for the oxidative dehydrogenation of propane (ODHP) reaction. The catalytic performance of the BCN nanosheets can be easily regulated by changing the guanine dosage. The control experiment and structural characterization indicate that the introduction of a suitable amount of carbon could prevent the formation of excessive B2 O3 from BCN materials and maintain the 2D skeleton at a high temperature of 520 °C. The best-performing catalyst BCN exhibits 81.9 % selectivity towards olefins with a stable propane conversion of 35.8 %, and the propene productivity reaches 16.2 mmol h-1  g-1 , which is much better than hexagonal BN (h-BN) catalysts. Density functional theory calculation results show that the presence of dispersed rather than aggregated carbon atoms can significantly affect the electronic microenvironment of h-BN, thereby boosting the catalytic activity of BCN.

Combination of Rapid Intrinsic Activity Measurements and Machine Learning as a Screening Approach for Multicomponent Electrocatalysts

Machine learning (ML) coupled with quantum chemistry calculations predicts catalyst properties with high accuracy; however, ML approaches in the design of multicomponent catalysts primarily rely on simulation data because obtaining sufficient experimental data in a short time is difficult. Herein, we developed a rapid screening strategy involving nanodroplet-mediated electrodeposition using a carbon nanocorn electrode as the support substrate that enables complete data collection for training artificial intelligence networks in one week. The inert support substrate ensures intrinsic activity measurement and operando characterization of the irreversible reconstruction of multinary alloy particles during the oxygen evolution reaction. Our approach works as a closed loop: catalyst synthesis-in situ measurement and characterization-database construction-ML analysis-catalyst design. Using artificial neural networks, the ML analysis revealed that the entropy values of multicomponent catalysts are proportional to their catalytic activity. The catalytic activities of high-entropy systems with different components varied little, and the overall catalytic activity was greater than that of the medium-low-entropy system. These findings will serve as a guideline for the design of catalysts.

A metal-free carbon catalyst for oxidative dehydrogenation of aryl cyclohexenes to produce biaryl compounds

A metal-free route based on a carbon catalyst to synthesize biphenyls through oxidative dehydrogenation (ODH) of phenyl cyclohexene has been investigated. Among the samples examined, an air-oxidized active carbon exhibits the best activity with a 9.1 × 10-2 h-1 rate constant, yielding 74% biphenyl in 28 h at 140 °C under five bar O2 in anisole. The apparent activation energy is measured as 54.5 kJ⋅mol-1. The extended reaction scope, consisting of 15 differently substituted phenyl cyclohexenes, shows the wide applicability of the proposed method. The catalyst's good recyclability over six runs suggests this ODH method as a promising route to access the biaryl compounds. In addition, the reaction mechanism is investigated with a combination of X-ray photoelectron spectroscopy, functional group blocking, and model compounds of carbon catalysts and is proposed to be based on the redox cycle of the quinoidic groups on the carbon surface. Additional experiments prove that the addition of the catalytic amount of acid (methanesulfonic acid) accelerates the reaction. In addition, Hammett plot examination suggests the formation of a carbonium intermediate, and its possible structure is outlined.

Efficient Screening of Metal Promoters of Pt Catalysts for C-H Bond Activation in Propane Dehydrogenation from a Combined First-Principles Calculations and Machine-Learning Study

Platinum-based materials are the most widely used catalysts in propane direct dehydrogenation, which could achieve a balanced activity between both propane conversion and propene formation. One of the core issues of Pt catalysts is how to efficiently activate the strong C-H bond. It has been suggested that adding second metal promoters could greatly solve this problem. In the current work, first-principles calculations combined with machine learning are performed in order to obtain the most promising metal promoters and identify key descriptors for control performance. The combination of three different modes of adding metal promoters and two ratios between promoters and platinum sufficiently describes the system under investigation. The activity of propane activation and the formation of propene are reflected by the increase or decrease of the adsorption energy and C-H bond activation of propane and propene after the addition of promoters. The data of adsorption energy and kinetic barriers from first-principles calculations are streamed into five machine-learning methods including gradient boosting regressor (GBR), K neighbors regressor (KNR), random forest regressor (RFR), and AdaBoost regressor (ABR) together with the sure independence screening and sparsifying operator (SISSO). The metrics (RMSE and R²) from different methods indicated that GBR and SISSO have the most optimal performance. Furthermore, it is found that some descriptors derived from the intrinsic properties of metal promoters can determine their properties. In the end, Pt₃Mo is identified as the most active catalyst. The present work not only provides a solid foundation for optimizing Pt catalysts but also provides a clear roadmap to screen metal alloy catalysts.

Folic Acid-Derived Low-dimensional carbons for efficient oxidative dehydrogenation of ethylbenzene

The oxidative dehydrogenation (ODH) of alkane is one of the most attractive routes in alkane production because of its favourable thermodynamic characteristic. Nitrogen-doped nanocarbons have demonstrated great potential in this reaction due to its cost-effective, high catalytic activity and stability. However, the influence of nitrogen on the catalytic properties of carbon materials is poorly understood due to the complexities of surface oxygen and nitrogen functional groups. Here we derive the performance descriptor that account for the nitrogen-dependent carbocatalysis in ODH reaction. To achieve this, we designed a set of nitrogen-doped nanocarbon materials with tunable nitrogen species by hydrothermal carbonization (HTC) treatment of the biomass folic acid (FA), which are applied in ODH of ethylbenzene. Among them, FA-180-1000 catalyst can achieve high ethylbenzene conversion (up to ∼62 %) and styrene selectivity (∼87 %), outperforming other HTC carbon-based catalysts. Structural characterizations and kinetic analyses revealed that nitrogen doping strongly interferes the charge polarization of CO site via electron transfer between CO, and nitrogen (mainly pyridine nitrogen and graphitic nitrogen) thus enhancing the reactivity of CO. Furthermore, the induction period during reaction process can be shortened by applying of sulfuric acid-assisted HTC method for constructing nitrogen-doped carbon catalyst with low crystallinity. The present work provides new insights into the contribution of nitrogen doping to the ODH reaction of carbon nanocatalysts, as well as guidance for the rational design of carbon catalysts for the conversion of hydrocarbons to high-value chemicals.

Unraveling Radical and Oxygenate Routes in the Oxidative Dehydrogenation of Propane over Boron Nitride

Oxidative dehydrogenation of propane (ODHP) is an emerging technology to meet the global propylene demand with boron nitride (BN) catalysts likely to play a pivotal role. It is widely accepted that gas-phase chemistry plays a fundamental role in the BN-catalyzed ODHP. However, the mechanism remains elusive because short-lived intermediates are difficult to capture. We detect short-lived free radicals (CH₃^•, C₃H₅^•) and reactive oxygenates, C_2-4 ketenes and C_2-3 enols, in ODHP over BN by operando synchrotron photoelectron photoion coincidence spectroscopy. In addition to a surface-catalyzed channel, we identify a gas-phase H-acceptor radical- and H-donor oxygenate-driven route, leading to olefin production. In this route, partially oxidized enols propagate into the gas phase, followed by dehydrogenation (and methylation) to form ketenes and finally yield olefins by decarbonylation. Quantum chemical calculations predict the >BO dangling site to be the source of free radicals in the process. More importantly, the easy desorption of oxygenates from the catalyst surface is key to prevent deep oxidation to CO₂.

Identification of Active Sites over Metal-Free Carbon Catalysts for Flue Gas Desulfurization

Carbon-based catalysts have been extensively used for flue gas desulfurization (FGD) and have exerted great importance in controlling SO₂ emissions over the past decades. However, many fundamental details about the nature of the active sites and desulfurization mechanism still remain unclear. Here, we reported the experimental and theoretical identifications of active sites in FGD on carbon catalysts. Temperature-programmed decomposition allowed us to modulate the number of oxygen functional groups on carbon catalysts and to establish its correlation with desulfurization activity. Selective passivation further demonstrated that the ketonic carbonyl (C═O) groups are the intrinsic active sites for FGD reaction. Combined with transient response experiments, quasi-in situ X-ray photoelectron spectroscopy, and density functional theory simulations, it was revealed that desulfurization reaction on carbon catalysts mainly proceeded via the Langmuir-Hinshelwood mechanism, during which the nucleophilic ketonic C═O groups served as active sites for chemically absorbing SO₂ and their adjacent sp²-hybridized carbon atoms dissociatively activated O₂. It also turned out that the formation of H₂SO₄ is the reaction barrier step. The output of this study should not only advance the understanding of desulfurization at the atomic scale but also provide a general guideline for the rational design of efficient carbon catalysts for FGD.

Iron boride boosted Fenton oxidation: Boron species induced sustainable FeIII/FeII redox couple

The regeneration of Fe(II) is the rate-limiting step in the Fenton/Fenton-like chain reactions that seriously hinder their scientific progress towards practical application. In this study, we proposed iron boride (FeB) for the first time as a new material to sustainably decompose H₂O₂ to generate hydroxyl radicals, which can non-selectively degrade a wide array of refractory organic pollutants. Fe(II) can be steadily released by the stepwise oxidation of FeB to stimulate Fenton reaction, meanwhile, B-B bonds as electron donors on the surface of FeB effectively promote the regeneration of Fe(II) from Fe(III) species and significantly accelerate the production of hydroxyl radicals. The low generation of toxic by-products and the high utilization rate of iron species validly avoid the secondary organic/metal pollution in the FeB/H₂O₂ system. Therefore, FeB mediated Fenton oxidation provides a novel strategy to realize a green and long-lasting environmental remediation.

Main-Group Catalysts with Atomically Dispersed In Sites for Highly Efficient Oxidative Dehydrogenation

Transition metal oxides are well-known catalysts for oxidative dehydrogenation thanks to their excellent ability to activate alkanes. However, they suffer from an inferior alkene yield due to the trade-off between the conversion and selectivity induced by more reactive alkenes than alkanes, which obscures the optimization of catalysts. Herein, we attempt to overcome this challenge by activating a selective main-group indium oxide considered to be inactive for oxidative dehydrogenation in conventional wisdom. Atomically dispersed In sites with the local structure of [InOH]²⁺ anchored by substituting the protons of supercages in HY are enclosed to be active centers that enable the activation of ethane with a metal-normalized turnover number of almost one magnitude higher than those of their supported In₂O₃ counterparts. Furthermore, the structure of isolated [InOH]²⁺ sites could be stabilized by in situ formed H₂O from the selective oxidation of hydrogen by In₂O₃ nanoparticles. As a result, the as-designed main-group In catalysts exhibit 80% ethene selectivity at 80% ethane conversion, thus achieving 60% ethene yield due to active isolated [InOH]²⁺ sites and selective In₂O₃ nanoparticles, outperforming state-of-the-art transition metal oxide catalysts. This study unlocks new opportunities for the utilization of main-group elements and could pave the way toward a more rational design of catalysts for highly efficient selective oxidation catalysis.

Strategies for improving the catalytic activity of metal-organic frameworks and derivatives in SR-AOPs: Facing emerging environmental pollutants

As persulfate activator, Metal organic frameworks (MOFs) and derivatives are widely concerned in degradation of emerging environmental pollutants by advanced oxygen technology dominated by sulfate radical () (SR-AOPs). However, the poor stability and low catalytic efficiency limit the performance of MOFs, requiring multiple strategies to further enhance their catalytic activity. The aim of this paper is to improve the catalytic activity of MOFs and their derivatives by physical and chemical enhancement strategies. Physical enhancement strategies mainly refer to the activation strategies including thermal activation, microwave activation and photoactivation. However, the physical enhancement strategies need energy consumption and require high stability of MOFs. As a substitute, chemical enhancement strategies are more widely used and represented by optimization, modification, composites and derivatives. In addition, the identification of reactive oxygen species, active site and electron distribution are important for distinguishing radical and non-radical pathways. Finally, as a new wastewater treatment technology exploration of unknown areas in SR-AOPs could better promote the technology development.

Alkali metal halide-coated perovskite redox catalysts for anaerobic oxidative dehydrogenation of n-butane

Oxidative dehydrogenation (ODH) of n-butane has the potential to efficiently produce butadiene without equilibrium limitation or coke formation. Despite extensive research efforts, single-pass butadiene yields are limited to <23% in conventional catalytic ODH with gaseous O₂. This article reports molten LiBr as an effective promoter to modify a redox-active perovskite oxide, i.e., La_0.8Sr_0.2FeO₃ (LSF), for chemical looping-oxidative dehydrogenation of n-butane (CL-ODHB). Under the working state, the redox catalyst is composed of a molten LiBr layer covering the solid LSF substrate. Characterizations and ab initio molecular dynamics (AIMD) simulations indicate that peroxide species formed on LSF react with molten LiBr to form active atomic Br, which act as reaction intermediates for C─H bond activation. Meanwhile, molten LiBr layer inhibits unselective CO₂ formation, leading to 42.5% butadiene yield. The redox catalyst design strategy can be extended to CL-ODH of other light alkanes such as iso-butane conversion to iso-butylene, providing a generalized approach for olefin production.

Pickering Emulsion Catalysis: Interfacial Chemistry, Catalyst Design, Challenges, and Perspectives

Pickering emulsions are particle-stabilized surfactant-free dispersions composed of two immiscible liquid phases, and emerge as attractive catalysis platform to surpass traditional technique barrier in some cases. In this review, we have comprehensively summarized the development and the catalysis applications of Pickering emulsions since the pioneering work in 2010. The explicit mechanism for Pickering emulsions will be initially discussed and clarified. Then, summarization is given to the design strategy of amphiphilic emulsion catalysts in two categories of intrinsic and extrinsic amphiphilicity. The progress of the unconventional catalytic reactions in Pickering emulsion is further described, especially for the polarity/solubility difference-driven phase segregation, "smart" emulsion reaction system, continuous flow catalysis, and Pickering interfacial biocatalysis. Challenges and future trends for the development of Pickering emulsion catalysis are finally outlined.

Treated activated carbon as a metal-free catalyst for effectively catalytic reduction of toxic hexavalent chromium

In this work, activated carbon treated in N₂ atmosphere, as a non-metallic catalyst, exhibits excellent catalytic performance in reduction of Cr (VI) to Cr (III) using HCOOH as the reducing agent at room temperature. A series of characterizations and control experiments were carried out to deduce the possible reaction mechanism. The results showed that the improved catalytic performance can be attributed to the enhanced graphitization degree and basic sites such as pyrone-like, which favor electron transferring and activation of reactant. The reaction rate constant observed herein for the C-800 was 22 and 6 times more than that for C-0 and Pd/C catalyst, respectively. In addition, C-800 showed good recycle performance, and no loss of activity was observed after 5 cycles. This study broadens the application of nonmetallic catalyst and provides an easy-available and cost-effective catalytic material for removing toxic Cr (VI).

Carbon Nanotubes Modified by BiMo Metal Oxides for Oxidative Dehydrogenation of 1-Butene to 1,3-Butadiene without Steam

Oxidative dehydrogenation (ODH) reaction has emerged as a promising route for converting 1-butene to value-added 1,3-butadiene (BD). However, the low BD selectivity of the current catalysts (≤40%) and high steam input are now the challenge of this process. Here, we demonstrate the fabrication BiMo oxides immobilized on carbon nanotubes (BiMo/CNTs), employing the sol–gel method, as a novel catalyst for the ODH of 1-butene without steam in a fixed-bed reactor. The catalytic performances of BiMo/CNTs with different compositions in the absence of steam were investigated. When BiMo/CNTs at a molar ratio of 0.018 were employed in the ODH of 1-butene under reaction conditions of 440 °C, 1-butene/oxygen = 1/0.8, and no steam, the optimal BD yield was achieved as high as 52.2%. Under this reaction condition, the catalyst maintains good stability without steam after 10 h of reaction. This work not only promotes the application of carbon materials in oxidative dehydrogenation reaction, but also accelerates the production of 1,3-butadiene in a more economical way.

Nickel Oxide-Carbon Soot-Cellulose Acetate Nanocomposite for the Detection of Mesitylene Vapour: Investigating the Sensing Mechanism Using an LCR Meter Coupled to an FTIR Spectrometer

Nanocomposite sensors were prepared using carbon soot (CNPs), nickel oxide nanoparticles (NiO-NPs), and cellulose acetate (CA), which was used to detect and study the sensing mechanism of mesitylene vapour at room temperature. Synthesised materials were characterised using high-resolution transmission electron microscopy (HR-TEM), powder x-ray diffraction (PXRD), Raman spectroscopy, and nitrogen sorption at 77 K. Various sensors were prepared using individual nanomaterials (NiO-NPs, CNPs, and CA), binary combinations of the nanomaterials (CNPs-NiO, CNPs-CA, and NiO-CA), and ternary composites (NiO-CNPs-CA). Among all of the prepared and tested sensors, the ternary nanocomposites (NiO-CNPs-CA) were found to be the most sensitive for the detection of mesitylene, with acceptable response recovery times. Fourier-transform infrared (FTIR) spectroscopy coupled with an LCR meter revealed that the mesitylene decomposes into carbon dioxide.

Selective decomposition of hydrazine over metal free carbonaceous materials

Herein we report a combined experimental and computational investigation unravelling the hydrazine hydrate decomposition reaction on metal-free catalysts. The study focuses on commercial graphite and two different carbon nanofibers, pyrolytically stripped (CNF-PS) and high heat-treated (CNF-HHT), respectively, treated at 700 and 3000 °C to increase their intrinsic defects. Raman spectroscopy demonstrated a correlation between the initial catalytic activity and the intrinsic defectiveness of carbonaceous materials. CNF-PS with higher defectivity (I_D/I_G = 1.54) was found to be the best performing metal-free catalyst, showing a hydrazine conversion of 94% after 6 hours of reaction and a selectivity to H₂ of 89%. In addition, to unveil the role of NaOH, CNF-PS was also tested in the absence of alkaline solution, showing a decrease in the reaction rate and selectivity to H₂. Density functional theory (DFT) demonstrated that the single vacancies (SV) present on the graphitic layer are the only active sites promoting hydrazine decomposition, whereas other defects such as double vacancy (DV) and Stone-Wales (SW) defects are unable to adsorb hydrazine fragments. Two symmetrical and one asymmetrical dehydrogenation pathways were found, in addition to an incomplete decomposition pathway forming N₂ and NH₃. On the most stable hydrogen production pathway, the effect of the alkaline medium was elucidated through calculations concerning the diffusion and recombination of atomic hydrogen. Indeed, the presence of NaOH helps the extraction of H species without additional energetic barriers, as opposed to the calculations performed in a polarizable continuum medium. Considering the initial hydrazine dissociative adsorption, the first step of the dehydrogenation pathway is more favourable than the scission of the N-N bond, which leads to NH₃ as the product. This first reaction step is crucial to define the reaction mechanisms and the computational results are in agreement with the experimental ones. Moreover, comparing two different hydrogen production pathways (with and without diffusion and recombination), we confirmed that the presence of sodium hydroxide in the experimental reaction environment can modify the energy gap between the two pathways, leading to an increased reaction rate and selectivity to H₂.

Metal-free carbocatalyst for room temperature acceptorless dehydrogenation of N-heterocycles

Catalytic dehydrogenation enables reversible hydrogen storage in liquid organics as a critical technology to achieve carbon neutrality. However, oxidant or base-free catalytic dehydrogenation at mild temperatures remains a challenge. Here, we demonstrate a metal-free carbocatalyst, nitrogen-assembly carbons (NCs), for acceptorless dehydrogenation of N-heterocycles even at ambient temperature, showing greater activity than transition metal-based catalysts. Mechanistic studies indicate that the observed catalytic activity of NCs is because of the unique closely placed graphitic nitrogens (CGNs), formed by the assembly of precursors during the carbonization process. The CGN site catalyzes the activation of C─H bonds in N-heterocycles to form labile C─H bonds on catalyst surface. The subsequent facile recombination of this surface hydrogen to desorb H₂ allows the NCs to work without any H-acceptor. With reverse transfer hydrogenation of various N-heterocycles demonstrated in this work, these NC catalysts, without precious metals, exhibit great potential for completing the cycle of hydrogen storage.