Stability of Ferropericlase in the Lower Mantle

Externally Heated Diamond ANvil Cell Experimentation (EH-DANCE) for studying materials and processes under extreme conditions

Externally heated diamond anvil cells provide a stable and uniform thermal environment, making them a versatile device to simultaneously generate high-pressure and high-temperature conditions in various fields of research, such as condensed matter physics, materials science, chemistry, and geosciences. The present study features the Externally Heated Diamond ANvil Cell Experimentation (EH-DANCE) system, a versatile configuration consisting of a diamond anvil cell with a customized microheater for stable resistive heating, bidirectional pressure control facilitated by compression and decompression membranes, and a water-cooled enclosure suitable for vacuum and controlled atmospheres. This integrated system excels with its precise control of both pressure and temperature for mineral and materials science research under extreme conditions. We showcase the capabilities of the system through its successful application in the investigation of the melting temperature and thermal equation of state of high-pressure ice-VII at temperatures up to 1400 K. The system was also used to measure the elastic properties of solid ice-VII and liquid H2O using Brillouin scattering and Raman spectra of carbonates using Raman spectroscopy, highlighting the potential of the EH-DANCE system in high-pressure research.

Experimental Study on Preparation of Ferropericlase by Oxalate Coprecipitation

It is always a goal of scientists to develop new techniques to identify the composition of mantle materials and understand geodynamic processes accurately. Ferropericlase (Mg,Fe)O is a prominent mineral in the lower mantel. It is a common practice in the research community to prepare ferropericlase using a solid-phase synthesis method or high-pressure experiment synthesis method. This conventional method contains a number of ambiguities a great deal of time is needed. In this paper, we have addressed the drawbacks of the conventional technique using a liquid-phase synthesis method to prepare ferropericlase. During the experiment, oxalic acid was added to a mixed solution of ferrous sulfate and magnesium chloride and mixed according to the molar ratio. The formed magnesium iron oxalate precipitate was sintered and reduced into the final sample. Furthermore, the final sample was analyzed using XRD and SEM. Compared to the solid-phase method, this coprecipitation method could produce ferropericlase with a shorter sintering time, lower sintering temperature, and a reduction in the amount of gas consumed. XRD and SEM results show that the liquid-phase method produced samples with better composition homogeneity.

Efficient graphite ring heater suitable for diamond-anvil cells to 1300 K

In order to generate homogeneous high temperatures at high pressures, a ring-shaped graphite heater has been developed to resistively heat diamond-anvil cell (DAC) samples up to 1300 K. By putting the heater in direct contact with the diamond anvils, this graphite heater design features the following advantages: (1) efficient heating: sample can be heated to 1300 K while the DAC body temperature remains less than 800 K, eliminating the requirement of a special alloy for the DAC; (2) compact design: the sample can be analyzed with in situ measurements, e.g., x-ray, optical, and electrical probes are possible. In particular, the side access of the heater allows for radial x-ray diffraction (XRD) measurements in addition to traditional axial XRD.

Mineral phases of the Earth´s mantle

Our knowledge of the structure of the Earth´s interior has been obtained by analysing seismic waves that travel in the Earth, and the reference Earth global models used by geophysicists are essentially seismological. Depth profiles of the seismic waves velocities reveal that the deep Earth is divided in several shells, separated by velocity and density discontinuities. The main discontinuity located at a depth of 2900 km corresponds to the transition between the mantle and the core. The Earth´s mantle can be further divided into the upper mantle and the lower mantle, with a transition zone characterised by two prominent increases in velocities observed at 410- and 660-km depths. This article will be focused on the mineral phases of the Earth´s mantle. The interpretation of seismological models in terms of chemical composition and temperature relies on the knowledge of the nature, structure and elastic properties of the candidate materials. We will describe to what extent recent advances in experimental mineral physics and X-ray diffraction have yielded essential knowledge on the structure and high-pressure high-temperature behaviour of pertinent materials, and major improvements in our understanding of the chemical and mineralogical composition of the Earth´s mantle.

Spin Transition Zone in Earth's Lower Mantle

Mineral properties in Earth's lower mantle are affected by iron electronic states, but representative pressures and temperatures have not yet been probed. Spin states of iron in lower-mantle ferropericlase have been measured up to 95 gigapascals and 2000 kelvin with x-ray emission in a laser-heated diamond cell. A gradual spin transition of iron occurs over a pressure-temperature range extending from about 1000 kilometers in depth and 1900 kelvin to 2200 kilometers and 2300 kelvin in the lower mantle. Because low-spin ferropericlase exhibits higher density and faster sound velocities relative to the high-spin ferropericlase, the observed increase in low-spin (Mg,Fe)O at mid-lower mantle conditions would manifest seismically as a lower-mantle spin transition zone characterized by a steeper-than-normal density gradient.

Spin transition in magnesiowüstite in earth's lower mantle

Iron in the major lower mantle (LM) minerals undergoes a high spin (HS) to low spin (LS) transition at relevant pressures (23-135 GPa). Previous failures of standard first principles approaches to describe this phenomenon have hindered its investigation and the clarification of important consequences. Using a rotationally invariant formulation of LDA + U we report a successful study of this transition in low solute concentration magnesiowüstite, (Mg(1-x)Fe(x)(O), (x < 0.2) the second most abundant LM phase. We show that the HS-LS transition goes through an insulating (semiconducting) intermediate mixed spins (MS) state without discontinuous changes in properties, as seen experimentally. We show that the HS state crosses over smoothly to the LS state passing through an insulating MS state where properties change continuously, as seen experimentally.

Iron spin transition in Earth's mantle

High-pressure Mössbauer spectroscopy on several compositions across the (Mg,Fe)O magnesiowüstite solid solution confirms that ferrous iron (Fe(2+)) undergoes a high-spin to low-spin transition at pressures and for compositions relevant to the bulk of the Earth's mantle. High-resolution x-ray diffraction measurements document a volume change of 4-5% across the pressure-induced spin transition, which is thus expected to cause seismological anomalies in the lower mantle. The spin transition can lead to dissociation of Fe-bearing phases such as magnesiowüstite, and it reveals an unexpected richness in mineral properties and phase equilibria for the Earth's deep interior.

Beating the miscibility barrier between iron group elements and magnesium by high-pressure alloying

Iron and magnesium are almost immiscible at ambient pressure. The low solubility of Mg in Fe is due to a very large size mismatch between the alloy components. However, the compressibility of Mg is much higher than that of Fe, and therefore the difference in atomic sizes between elements decreases dramatically with pressure. Based on the predictions of ab initio calculations, we demonstrate in a series of experiments in a multianvil apparatus and in electrically and laser-heated diamond anvil cells that high pressure promotes solubility of magnesium in iron. At the megabar pressure range, more than 10 at. % of Mg can dissolve in Fe and then the alloy can be quenched to ambient conditions. A generality of the concept of high-pressure alloying between immiscible elements is demonstrated by its application to two other Fe group elements, Co and Ni.

Shear waves in the diamond-anvil cell reveal pressure-induced instability in (Mg,Fe)O

The emerging picture of Earth's deep interior from seismic tomography indicates more complexity than previously thought. The presence of lateral anisotropy and heterogeneity in Earth's mantle highlights the need for fully anisotropic elasticity data from mineral physics. A breakthrough in high-frequency (gigahertz) ultrasound has resulted in transmission of pure-mode elastic shear waves into a high-pressure diamond-anvil cell using a P-to-S elastic-wave conversion. The full elastic tensor (c(ij)) of high-pressure minerals or metals can be measured at extreme conditions without optical constraints. Here we report the effects of pressure and composition on shear-wave velocities in the major lower-mantle oxide, magnesiowüstite-(Mg,Fe)O. Magnesiowüstite containing more than approximately 50% iron exhibits pressure-induced c(44) shear-mode softening, indicating an instability in the rocksalt structure. The oxide closer to expected lower-mantle compositions ( approximately 20% iron) shows increasing shear velocities more similar to MgO, indicating that it also should have a wide pressure-stability field. A complete sign reversal in the c(44) pressure derivative points to a change in the topology of the (Mg,Fe)O phase diagram at approximately 50-60% iron. The relative stability of Mg-rich (Mg,Fe)O and the strong compositional dependence of shear-wave velocities (and partial differential c(44)/ partial differential P) in (Mg,Fe)O implies that seismic heterogeneity in Earth's lower mantle may result from compositional variations rather than phase changes in (Mg,Fe)O.

Stability of magnesiowustite in Earth's lower mantle

Magnesiowüstite [(Mg,Fe)O] is the second most abundant mineral of Earth's lower mantle. Understanding its stability under lower mantle conditions is crucial for interpreting the physical and chemical properties of the whole Earth. Previous studies in an externally heated diamond anvil cell suggested that magnesiowüstites decompose into two components, Fe-rich and Mg-rich magnesiowüstites at 86 GPa and 1,000 K. Here we report an in situ study of two magnesiowüstites [(Mg(0.39),Fe(0.61))O and (Mg(0.25),Fe(0.75))O] at pressures and temperatures that overlap with mantle conditions, using a laser-heated diamond anvil cell combined with synchrotron x-ray diffraction. Our results show that addition of Mg in wüstite (FeO) can stabilize the rock-salt structure to much higher pressures and temperatures. In contrast to the previous studies, our results indicate that Mg-rich magnesiowüstite is stable in the rock-salt structure in the lower mantle. The physical and chemical properties of magnesiowüstite should change gradually and continuously in the lower mantle, suggesting that it does not make a significant contribution to seismic-wave heterogeneity of the lower mantle. Stable Mg-rich magnesiowüstite in lowermost mantle can destabilize FeO in the core-mantle boundary region and remove FeO from the outer core.

Aggregate sound velocities and acoustic Grüneisen parameter of iron up to 300 GPa and 1,200 K

Successful interpretation of available geophysical data requires experimental and theoretical information on the elasticity of solids under physical conditions of Earth's interior. Because iron is considered as major component in Earth's core, elastic properties of iron at high pressures and temperatures are very important for modeling its composition and dynamics. We use in situ x-ray diffraction data on epsilon-iron at static pressures up to 300 GPa and temperatures to 1,200 K to determine the Debye-Waller temperature factors and calculate aggregate sound velocities and Grüneisen parameter of epsilon-iron by using an approach that is based on Rietveld refinement at high pressures and temperatures.

Chemical interaction of Fe and Al(2)O3 as a source of heterogeneity at the Earth's core-mantle boundary

Seismological studies have revealed that a complex texture or heterogeneity exists in the Earth's inner core and at the boundary between core and mantle. These studies highlight the importance of understanding the properties of iron when modelling the composition and dynamics of the core and the interaction of the core with the lowermost mantle. One of the main problems in inferring the composition of the lowermost mantle is our lack of knowledge of the high-pressure and high-temperature chemical reactions that occur between iron and the complex Mg-Fe-Si-Al-oxides which are thought to form the bulk of the Earth's lower mantle. A number of studies have demonstrated that iron can react with MgSiO3-perovskite at high pressures and high temperatures, and it was proposed that the chemical nature of this process involves the reduction of silicon by the more electropositive iron. Here we present a study of the interaction between iron and corundum (Al(2)O3) in electrically- and laser-heated diamond anvil cells at 2,000-2,200 K and pressures up to 70 GPa, simulating conditions in the Earth's deep interior. We found that at pressures above 60 GPa and temperatures of 2,200 K, iron and corundum react to form iron oxide and an iron-aluminium alloy. Our results demonstrate that iron is able to reduce aluminium out of oxides at core-mantle boundary conditions, which could provide an additional source of light elements in the Earth's core and produce significant heterogeneity at the core-mantle boundary.

Pressure-induced Invar effect in Fe-Ni alloys

We have measured the pressure-volume (P-V) relations for cubic iron-nickel alloys for three different compositions: Fe 0.64Ni (0.36), Fe 0.55Ni (0.45), and Fe 0.20Ni (0.80). It is observed that for a certain pressure range the bulk modulus does not change or can even decrease to some minimum value, after which it begins to increase under still higher pressure. In our experiment, we observe for the first time a new effect, namely, that the Fe-Ni alloys with high Ni concentrations, which show positive thermal expansion at ambient pressure, become Invar system upon compression over a certain pressure range.