Activity of the small modified amino acid alpha-hydroxy glycineamide on in vitro and in vivo human immunodeficiency virus type 1 capsid assembly and infectivity

Anti-human immunodeficiency virus type 1 agent alpha-hydroxy glycineamide enters the target cells via a mechanism of passive diffusion

OBJECTIVES

Alpha-hydroxy glycineamide (αHGA) is the active antiviral metabolite of tri-peptide glycyl-prolyl-glycine-amide (GPG-NH2 ). αHGA inhibits the replication of HIV-1 in vitro by interfering with the capsid formation. It has also an effect on viral gp160 envelope protein. Since drug transport is an important aspect of drug function, we investigated the mechanism of [(14) C] αHGA uptake by a human T cell line.

METHODS

H9 cells were incubated with defined amounts of radiolabelled αHGA for definite time durations. After harvesting the cells and removal of radiolabelled material, the radioactivity associated with the cells was assayed. Experiments were also designed to address the effect of metabolic inhibitors, temperature and extra unlabelled compound as potential competitor on the cellular uptake of αHGA.

KEY FINDINGS

Uptake of αHGA into H9 cells was time- and dose-dependent. The uptake properties showed a low temperature dependency (Q10  < 2). Moreover the uptake was not inhibited by increasing concentrations of cold competitors. There was no effect on cellular uptake of αHGA by known metabolic inhibitors, NaN3 and NaF.

CONCLUSIONS

Kinetic analysis of compound uptake, metabolic inhibition studies, saturation studies and the Q10 value of αHGA uptake indicate that the compound enters H9 cells by a mechanism of passive diffusion.

Production and purification of polymerization-competent HIV-1 capsid protein p24 (CA) in NiCo21(DE3) Escherichia coli

Background

HIV genome is packaged and organized in a conical capsid, which is made up of ~1,500 copies of the viral capsid protein p24 (CA). Being a primary structural component and due to its critical roles in both late and early stages of the HIV replication cycle, CA has attracted increased interest as a drug discovery target in recent years. Drug discovery studies require large amounts of highly pure and biologically active protein. It is therefore desirable to establish a simple and reproducible process for efficient production of HIV-1 CA.

Result

In this work, 6-His-tagged wild type CA from HIV-1 (NL4.3) was expressed in rare tRNA-supplemented NiCo21(DE3) Escherichia coli, and its production was studied in shake flask culture condition of expression. Influences of various key cultivation parameters were examined to identify optimal conditions for HIV-1 CA production. It was found that a culture temperature of 22°C and induction with 0.05 mM IPTG at the early stage of growth were ideal, leading to a maximum biomass yield when grown in Super broth supplemented with 1% glucose. With optimized culture conditions, a final biomass concentration of ~27.7 g L^-1 (based on optical density) was obtained in 12 hours post-induction, leading to a yield of about ~170 mg L^-1 HIV-1 CA. A two-step purification strategy (chitin beads + IMAC) was employed, which efficiently removed metal affinity resin-binding bacterial proteins that contaminate recombinant His-tagged protein preparation, and resulted in highly pure HIV-1 CA. The purified protein was capable of polymerization when tested in an in vitro polymerization assay.

Conclusions

By using this optimized expression and purification procedure, milligram amounts of highly pure and polymerization-competent recombinant HIV-1 CA can be produced at the lab-scale and thus used for further biochemical studies.

Dual-acting stapled peptides target both HIV-1 entry and assembly

Background

Previously, we reported the conversion of the 12-mer linear and cell-impermeable peptide CAI to a cell-penetrating peptide NYAD-1 by using an i,i + 4 hydrocarbon stapling technique and confirmed its binding to the C-terminal domain (CTD) of the HIV-1 capsid (CA) protein with an improved affinity (K_d ~ 1 μM) compared to CAI (K_d ~ 15 μM). NYAD-1 disrupts the formation of both immature- and mature-like virus particles in in vitro and cell-based assembly assays. In addition, it displays potent anti-HIV-1 activity in cell culture against a range of laboratory-adapted and primary HIV-1 isolates.

Results

In this report, we expanded the study to i,i + 7 hydrocarbon-stapled peptides to delineate their mechanism of action and antiviral activity. We identified three potent inhibitors, NYAD-36, -66 and -67, which showed strong binding to CA in NMR and isothermal titration calorimetry (ITC) studies and disrupted the formation of mature-like particles. They showed typical α-helical structures and penetrated cells; however, the cell penetration was not as efficient as observed with the i,i + 4 peptides. Unlike NYAD-1, the i,i + 7 peptides did not have any effect on virus release; however, they impaired Gag precursor processing. HIV-1 particles produced in the presence of these peptides displayed impaired infectivity. Consistent with an effect on virus entry, selection for viral resistance led to the emergence of two mutations in the gp120 subunit of the viral envelope (Env) glycoprotein, V120Q and A327P, located in the conserved region 1 (C1) and the base of the V3 loop, respectively.

Conclusion

The i,i + 7 stapled peptides derived from CAI unexpectedly target both CA and the V3 loop of gp120. This dual-targeted activity is dependent on their ability to penetrate cells as well as their net charge. This mechanistic revelation will be useful in further modifying these peptides as potent anti-HIV-1 agents.

Biophysical characterization of the feline immunodeficiency virus p24 capsid protein conformation and in vitro capsid assembly

The Feline Immunodeficiency Virus (FIV) capsid protein p24 oligomerizes to form a closed capsid that protects the viral genome. Because of its crucial role in the virion, FIV p24 is an interesting target for the development of therapeutic strategies, although little is known about its structure and assembly. We defined and optimized a protocol to overexpress recombinant FIV capsid protein in a bacterial system. Circular dichroism and isothermal titration calorimetry experiments showed that the structure of the purified FIV p24 protein was comprised mainly of α-helices. Dynamic light scattering (DLS) and cross-linking experiments demonstrated that p24 was monomeric at low concentration and dimeric at high concentration. We developed a protocol for the in vitro assembly of the FIV capsid. As with HIV, an increased ionic strength resulted in FIV p24 assembly in vitro. Assembly appeared to be dependent on temperature, salt concentration, and protein concentration. The FIV p24 assembly kinetics was monitored by DLS. A limit end-point diameter suggested assembly into objects of definite shapes. This was confirmed by electron microscopy, where FIV p24 assembled into spherical particles. Comparison of FIV p24 with other retroviral capsid proteins showed that FIV assembly is particular and requires further specific study.

Rationally designed interfacial peptides are efficient in vitro inhibitors of HIV-1 capsid assembly with antiviral activity

Virus capsid assembly constitutes an attractive target for the development of antiviral therapies; a few experimental inhibitors of this process for HIV-1 and other viruses have been identified by screening compounds or by selection from chemical libraries. As a different, novel approach we have undertaken the rational design of peptides that could act as competitive assembly inhibitors by mimicking capsid structural elements involved in intersubunit interfaces. Several discrete interfaces involved in formation of the mature HIV-1 capsid through polymerization of the capsid protein CA were targeted. We had previously designed a peptide, CAC1, that represents CA helix 9 (a major part of the dimerization interface) and binds the CA C-terminal domain in solution. Here we have mapped the binding site of CAC1, and shown that it substantially overlaps with the CA dimerization interface. We have also rationally modified CAC1 to increase its solubility and CA-binding affinity, and designed four additional peptides that represent CA helical segments involved in other CA interfaces. We found that peptides CAC1, its derivative CAC1M, and H8 (representing CA helix 8) were able to efficiently inhibit the in vitro assembly of the mature HIV-1 capsid. Cocktails of several peptides, including CAC1 or CAC1M plus H8 or CAI (a previously discovered inhibitor of CA polymerization), or CAC1M+H8+CAI, also abolished capsid assembly, even when every peptide was used at lower, sub-inhibitory doses. To provide a preliminary proof that these designed capsid assembly inhibitors could eventually serve as lead compounds for development of anti-HIV-1 agents, they were transported into cultured cells using a cell-penetrating peptide, and tested for antiviral activity. Peptide cocktails that drastically inhibited capsid assembly in vitro were also able to efficiently inhibit HIV-1 infection ex vivo. This study validates a novel, entirely rational approach for the design of capsid assembly interfacial inhibitors that show antiviral activity.

Virus maturation as a new HIV-1 therapeutic target

Development of novel therapeutic targets against HIV-1 is a high research priority owing to the serious clinical consequences associated with acquisition of resistance to current antiretroviral drugs. The HIV-1 structural protein Gag represents a potential new therapeutic target as it plays a central role in virus particle production yet is not targeted by any of the antiretroviral drugs approved at present. The Gag polyprotein precursor multimerizes to form immature particles that bud from the infected cell. Concomitant with virus release, the Gag precursor undergoes proteolytic processing by the viral protease to generate the mature Gag proteins, which include capsid (CA). Once liberated from the Gag polyprotein precursor, CA molecules interact to reassemble into a condensed conical core, which organizes the viral RNA genome and several viral proteins to facilitate virus replication in the next round of infection. Correct Gag proteolytic processing and core assembly are therefore essential for virus infectivity. In this review, we discuss new strategies to inhibit maturation by targeting proteolytic cleavage sites in Gag or CA-CA interactions required for core formation. The identification and development of lead maturation inhibitors are highlighted.

Isolation and characterization of a small antiretroviral molecule affecting HIV-1 capsid morphology

Background

Formation of an HIV-1 particle with a conical core structure is a prerequisite for the subsequent infectivity of the virus particle. We have previously described that glycineamide (G-NH₂) when added to the culture medium of infected cells induces non-infectious HIV-1 particles with aberrant core structures.

Results

Here we demonstrate that it is not G-NH₂ itself but a metabolite thereof that displays antiviral activity. We show that conversion of G-NH₂ to its antiviral metabolite is catalyzed by an enzyme present in bovine and porcine but surprisingly not in human serum. Structure determination by NMR suggested that the active G-NH₂ metabolite was α-hydroxy-glycineamide (α-HGA). Chemically synthesized α-HGA inhibited HIV-1 replication to the same degree as G-NH₂, unlike a number of other synthesized analogues of G-NH₂ which had no effect on HIV-1 replication. Comparisons by capillary electrophoresis and HPLC of the metabolite with the chemically synthesized α-HGA further confirmed that the antiviral G-NH₂-metabolite indeed was α-HGA.

Conclusion

α-HGA has an unusually simple structure and a novel mechanism of antiviral action. Thus, α-HGA could be a lead for new antiviral substances belonging to a new class of anti-HIV drugs, i.e. capsid assembly inhibitors.

Characterization of the in vitro HIV-1 capsid assembly pathway

During the morphogenesis of mature human immunodeficiency virus-1 cores, viral capsid proteins assemble conical or tubular shells around viral ribonucleoprotein complexes. This assembly step is mimicked in vitro through reactions in which capsid proteins oligomerize to form long tubes, and this process can be modeled as consisting of a slow nucleation period, followed by a rapid phase of tube growth. We have developed a novel fluorescence microscopy approach to monitor in vitro assembly reactions and have employed it, along with electron microscopy analysis, to characterize the assembly process. Our results indicate that temperature, salt concentration, and pH changes have differential effects on tube nucleation and growth steps. We also demonstrate that assembly can be unidirectional or bidirectional, that growth can be capped, and that proteins can assemble onto the surfaces of tubes, yielding multiwalled or nested structures. Finally, experiments show that a peptide inhibitor of in vitro assembly also can dismantle preexisting tubes, suggesting that such reagents may possess antiviral effects against both viral assembly and uncoating. Our investigations help establish a basis for understanding the mechanism of mature human immunodeficiency virus-1 core assembly and avenues for antiviral inhibition.