Dilution Factor of Quantitative Bacterial Cultures Obtained by Bronchoalveolar Lavage in Patients with Ventilator-Associated Bacterial Pneumonia

Effects of clinically achievable pulmonary antibiotic concentrations on the recovery of bacteria: in vitro comparison of the BioFire FILMARRAY Pneumonia Panel versus conventional culture methods in bronchoalveolar lavage fluid

Empiric antibiotics may affect bacterial pathogen recovery using conventional culture methods (CCMs), while PCR-based diagnostics are likely less affected. Herein, we conducted an in vitro study of bronchoalveolar lavage fluid (BAL) inoculated with bacteria and clinically relevant antibiotic concentrations to compare the recovery between the BioFire FILMARRAY Pneumonia Panel (Pn Panel) and CCMs. Remnant clinical BAL specimens were inoculated to ~105 cfu/mL using 12 clinical isolates. Isolates consisted of one wild-type (WT) and one or more resistant strains of: Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, Acinetobacter baumannii, and Staphylococcus aureus. Piperacillin-tazobactam, cefepime, meropenem, levofloxacin, or vancomycin was added to achieve pulmonary epithelial lining fluid peak and trough concentrations. Post-exposure cfu/mL was quantified by CCMs and simultaneously tested by the PN Panel for identification and semi-quantitative genetic copies/mL. CCM results were categorized as significant growth (SG) (≥1 × 104), no significant growth (NSG) (≥1 × 103, <1 × 104), or no growth (NG) (<1 × 103). The PN Panel accurately identified all isolates, resistance genes, and reported ≥106 genetic copies/mL regardless of antibiotic exposure. The CCM also identified all S. aureus strains exposed to vancomycin. For WT Gram-negative isolates exposed to antibiotics, SG, NSG, and NG were observed in 7/52 (13%), 18/52 (35%), and 27/52 (52%) of CCM experiments, respectively. For resistant Gram-negatives isolates, SG, NSG, and NG were observed in 62/88 (70%), 17/88 (19%), and 9/88 (10%), respectively. These in vitro data demonstrate that the PN Panel is able to identify Gram-negative pathogens in the presence of clinically significant antibiotic concentrations when CCM may not.

Inoculum-Based Dosing: A Novel Concept for Combining Time with Concentration-Dependent Antibiotics to Optimize Clinical and Microbiological Outcomes in Severe Gram Negative Sepsis

Certain classes of antibiotics show "concentration dependent" antimicrobial activity; higher concentrations result in increased bacterial killing rates, in contrast to "time dependent antibiotics", which show antimicrobial activity that depends on the time that antibiotic concentrations remain above the MIC. Aminoglycosides and fluoroquinolones are still widely used concentration-dependent antibiotics. These antibiotics are not hydrolyzed by beta-lactamases and are less sensitive to the inoculum effect, which can be defined as an increased MIC for the antibiotic in the presence of a relatively higher bacterial load (inoculum). In addition, they possess a relatively long Post-Antibiotic Effect (PAE), which can be defined as the absence of bacterial growth when antibiotic concentrations fall below the MIC. These characteristics make them interesting complementary antibiotics in the management of Multi-Drug Resistant (MDR) bacteria and/or (neutropenic) patients with severe sepsis. Global surveillance studies have shown that up to 90% of MDR Gram-negative bacteria still remain susceptible to aminoglycosides, depending on the susceptibility breakpoint (e.g., CLSI or EUCAST) being applied. This percentage is notably lower for fluoroquinolones but depends on the region, type of organism, and mechanism of resistance involved. Daily (high-dose) dosing of aminoglycosides for less than one week has been associated with significantly less nephro/oto toxicity and improved target attainment. Furthermore, higher-than-conventional dosing of fluoroquinolones has been linked to improved clinical outcomes. Beta-lactam antibiotics are the recommended backbone of therapy for severe sepsis. Since these antibiotics are time-dependent, the addition of a second concentration-dependent antibiotic could serve to quickly lower the bacterial inoculum, create PAE, and reduce Penicillin-Binding Protein (PBP) expression. Inadequate antibiotic levels at the site of infection, especially in the presence of high inoculum infections, have been shown to be important risk factors for inadequate resistance suppression and therapeutic failure. Therefore, in the early phase of severe sepsis, effort should be made to optimize the dose and quickly lower the inoculum. In this article, the authors propose a novel concept of "Inoculum Based Dosing" in which the decision for antibiotic dosing regimens and/or combination therapy is not only based on the PK parameters of the patient, but also on the presumed inoculum size. Once the inoculum has been lowered, indirectly reflected by clinical improvement, treatment simplification should be considered to further treat the infection.

Variability of murine bacterial pneumonia models used to evaluate antimicrobial agents

Antimicrobial resistance has become one of the greatest threats to human health, and new antibacterial treatments are urgently needed. As a tool to develop novel therapies, animal models are essential to bridge the gap between preclinical and clinical research. However, despite common usage of in vivo models that mimic clinical infection, translational challenges remain high. Standardization of in vivo models is deemed necessary to improve the robustness and reproducibility of preclinical studies and thus translational research. The European Innovative Medicines Initiative (IMI)-funded “Collaboration for prevention and treatment of MDR bacterial infections” (COMBINE) consortium, aims to develop a standardized, quality-controlled murine pneumonia model for preclinical efficacy testing of novel anti-infective candidates and to improve tools for the translation of preclinical data to the clinic. In this review of murine pneumonia model data published in the last 10 years, we present our findings of considerable variability in the protocols employed for testing the efficacy of antimicrobial compounds using this in vivo model. Based on specific inclusion criteria, fifty-three studies focusing on antimicrobial assessment against Pseudomonas aeruginosa, Klebsiella pneumoniae and Acinetobacter baumannii were reviewed in detail. The data revealed marked differences in the experimental design of the murine pneumonia models employed in the literature. Notably, several differences were observed in variables that are expected to impact the obtained results, such as the immune status of the animals, the age, infection route and sample processing, highlighting the necessity of a standardized model.

Model-Informed Translation of In Vitro Effects of Short-, Prolonged- and Continuous-Infusion Meropenem against Pseudomonas aeruginosa to Clinical Settings

Pharmacokinetic-pharmacodynamic (PKPD) models have met increasing interest as tools to identify potential efficacious antibiotic dosing regimens in vitro and in vivo. We sought to investigate the impact of diversely shaped clinical pharmacokinetic profiles of meropenem on the growth/killing patterns of Pseudomonas aeruginosa (ARU552, MIC = 16 mg/L) over time using a semi-mechanistic PKPD model and a PK/PD index-based approach. Bacterial growth/killing were driven by the PK profiles of six patient populations (infected adults, burns, critically ill, neurosurgery, obese patients) given varied pathogen features (e.g., EC50, growth rate, inoculum), patient characteristics (e.g., creatinine clearance), and ten dosing regimens (including two dose levels and 0.5-h, 3-h and continuous-infusion regimens). Conclusions regarding the most favourable dosing regimen depended on the assessment of (i) the total bacterial load or fT>MIC (time that unbound concentrations exceed the minimum inhibitory concentration); (ii) the median or P0.95 profile of the population; and (iii) 8 h or 24 h time points. Continuous infusion plus loading dose as well as 3-h infusions (3-h infusions: e.g., for scenarios associated with low meropenem concentrations, P0.95 profiles, and MIC ≥ 16 mg/L) appeared superior to standard 0.5-h infusions at 24 h. The developed platform can serve to identify promising strategies of efficacious dosing for clinical trials.

Polymyxin B Pharmacodynamics in the Hollow-Fiber Infection Model: What You See May Not Be What You Get

Dose range studies for polymyxin B (PMB) regimens of 0.75 to 12 mg/kg given every 12 h (q12h) were evaluated for bacterial killing and resistance prevention against an AmpC-overexpressing Pseudomonas aeruginosa and a blaKPC-3-harboring Klebsiella pneumoniae in 10-day in vitro hollow-fiber models. An exposure-response was observed. But all regimens failed due to regrowth. Lower-dose regimens amplified isolates that expressed transient, lower-level adaptive resistance to PMB (MICs ≤ 4 mg/liter). Higher PMB dosages amplified isolates that expressed this resistance mechanism, a higher-MIC "moderately stable" adaptive resistance, and a higher-MIC stable resistance to PMB. Failure of the highest dose regimens was solely due to subpopulations that expressed the two higher-level resistances. Total and bioactive PMB concentrations in broth declined below targeted PK profiles within hours of treatment initiation and prior to bacterial regrowth. With treatment failure, the total PMB measured in bacteria was substantially higher than in broth. But the bioactive PMB in broth and bacteria were low to nondetectable. Together, these findings suggest a sequence of events for treatment failure of the clinical regimen. First, PMB concentrations in broth are diluted as PMB binds to bacteria, resulting in total and bioactive PMB in broth that is lower than targeted. Bacterial regrowth and treatment failure follow, with emergence of subpopulations that express transient lower-level adaptive resistance to PMB and possibly higher-level adaptive and stable resistances. Higher-dose PMB regimens can prevent the emergence of transient lower-level adaptive resistance, but they do not prevent treatment failure due to isolates that express higher-level resistance mechanisms.

Ceftolozane-Tazobactam in the Treatment of Experimental Pseudomonas aeruginosa Pneumonia in Persistently Neutropenic Rabbits: Impact on Strains with Genetically Defined Mechanisms of Resistance

Ceftolozane-tazobactam (C/T) is a novel cephalosporin with in vitro activity against Pseudomonas aeruginosa that is resistant to extended-spectrum penicillins and antipseudomonal cephalosporins. In order to assess the antimicrobial effect of C/T in treatment of Pseudomonas pneumonia, we investigated the pharmacokinetics and efficacy of C/T in persistently neutropenic rabbits. Pseudomonas pneumonia was established by direct endotracheal inoculation. Treatment groups consisted of C/T, ceftazidime (CAZ), piperacillin-tazobactam (TZP), and untreated controls (UC). Rabbits received a dosage of C/T of 80 mg/kg every 4 h (q4h) intravenously (i.v.) (53 mg/kg ceftolozane/26 mg/kg tazobactam) to match the free drug time above the MIC as well as a comparable plasma area under the concentration-time curve (AUC) (humanized doses of ceftolozane-tazobactam of 3 g [2 g/1 g]) q8h, due to the more rapid elimination of ceftolozane in rabbits (0.75 h) than in humans (2.5 h). Four molecularly characterized clinical P. aeruginosa isolates from patients with pneumonia were studied, including one isolate from each classification group: pan-susceptible (PS), outer membrane porin D (OPRD) porin loss (OPRDPL), efflux pump expression (EPE), and AmpC hyperexpression (ACHE). Treatment was continued for 12 days. Treatment with ceftolozane-tazobactam resulted in a ≥10⁵ reduction in residual pulmonary and bronchoalveolar lavage (BAL) fluid bacterial burdens caused by all 4 strains (P ≤ 0.01). This antibacterial activity coincided with reduction of lung weight (an organism-mediated pulmonary injury marker) (P < 0.05). CAZ was less active in ACHE-infected rabbits, and TZP had less activity against EPE, ACHE, and OPRDPL strains. Survival was prolonged in the C/T and CAZ treatment groups in comparison to the TZP and UC groups (P < 0.001). Ceftolozane-tazobactam is highly active in treatment of experimental P. aeruginosa pneumonia in persistently neutropenic rabbits, including infections caused by strains with the most common resistance mechanisms.

Generating Robust and Informative Nonclinical In Vitro and In Vivo Bacterial Infection Model Efficacy Data To Support Translation to Humans

In June 2017, the National Institute of Allergy and Infectious Diseases, part of the National Institutes of Health, organized a workshop entitled “Pharmacokinetics-Pharmacodynamics (PK/PD) for Development of Therapeutics against Bacterial Pathogens.” The aims were to discuss details of various PK/PD models and identify sound practices for deriving and utilizing PK/PD relationships to design optimal dosage regimens for patients. Workshop participants encompassed individuals from academia, industry, and government, including the United States Food and Drug Administration.

In June 2017, the National Institute of Allergy and Infectious Diseases, part of the National Institutes of Health, organized a workshop entitled “Pharmacokinetics-Pharmacodynamics (PK/PD) for Development of Therapeutics against Bacterial Pathogens.” The aims were to discuss details of various PK/PD models and identify sound practices for deriving and utilizing PK/PD relationships to design optimal dosage regimens for patients. Workshop participants encompassed individuals from academia, industry, and government, including the United States Food and Drug Administration. This and the accompanying review on clinical PK/PD summarize the workshop discussions and recommendations. Nonclinical PK/PD models play a critical role in designing human dosage regimens and are essential tools for drug development. These include in vitro and in vivo efficacy models that provide valuable and complementary information for dose selection and translation from the laboratory to human. It is crucial that studies be designed, conducted, and interpreted appropriately. For antibacterial PK/PD, extensive published data and expertise are available. These have been leveraged to develop recommendations, identify common pitfalls, and describe the applications, strengths, and limitations of various nonclinical infection models and translational approaches. Despite these robust tools and published guidance, characterizing nonclinical PK/PD relationships may not be straightforward, especially for a new drug or new class. Antimicrobial PK/PD is an evolving discipline that needs to adapt to future research and development needs. Open communication between academia, pharmaceutical industry, government, and regulatory bodies is essential to share perspectives and collectively solve future challenges.

Antibacterial Activity of Human Simulated Epithelial Lining Fluid Concentrations of Ceftazidime-Avibactam Alone or in Combination with Amikacin Inhale (BAY41-6551) against Carbapenem-Resistant Pseudomonas aeruginosa and Klebsiella pneumoniae

The role of inhalational combination therapy when treating carbapenem-resistant Pseudomonas aeruginosa and Klebsiella pneumoniae with newer beta-lactam/beta-lactamase inhibitors has not been established. Using a 72-h in vitro pharmacodynamic chemostat model, we simulated the human exposures achieved in epithelial lining fluid (ELF) following intravenous treatment with ceftazidime-avibactam (CZA) 2.5 g every 8 h (q8h) alone and in combination with inhaled amikacin (AMK-I) 400 mg q12h, a reformulated aminoglycoside designed for inhalational administration, against three P. aeruginosa isolates (CZA [ceftazidime/avibactam] MICs, 4/4 to 8/4 μg/ml; AMK-I MICs, 8 to 64 μg/ml) and three K. pneumoniae isolates (CZA MICs, 1/4 to 8/4 μg/ml; AMK-I MICs, 32 to 64 μg/ml). Combination therapy resulted in a significant reduction in 72-h CFU compared with that of CZA monotherapy against two of three P. aeruginosa isolates (-4.14 log₁₀ CFU/ml, P = 0.027; -1.42 log₁₀ CFU/ml, P = 0.020; and -0.4 log₁₀ CFU/ml, P = 0.298) and two of three K. pneumoniae isolates (0.04 log₁₀ CFU/ml, P = 0.963; -4.34 log₁₀ CFU/ml, P < 0.001; and -2.34 log₁₀ CFU/ml, P = 0.021). When measured by the area under the bacterial growth curve (AUBC) over 72 h, significant reductions were observed in favor of the combination regimen against all six isolates tested. AMK-I combination therapy successfully suppressed CZA resistance development in one K. pneumoniae isolate harboring bla_KPC-3 that was observed during CZA monotherapy. These studies suggest a beneficial role for combination therapy with intravenous CZA and inhaled AMK when treating pneumonia caused by carbapenem-resistant Gram-negative bacteria.

Combating Carbapenem-Resistant Acinetobacter baumannii by an Optimized Imipenem-plus-Tobramycin Dosage Regimen: Prospective Validation via Hollow-Fiber Infection and Mathematical Modeling

We aimed to prospectively validate an optimized combination dosage regimen against a clinical carbapenem-resistant Acinetobacter baumannii (CRAB) isolate (imipenem MIC, 32 mg/liter; tobramycin MIC, 2 mg/liter). Imipenem at constant concentrations (7.6, 13.4, and 23.3 mg/liter, reflecting a range of clearances) was simulated in a 7-day hollow-fiber infection model (inoculum, ∼10^7.2 CFU/ml) with and without tobramycin (7 mg/kg q24h, 0.5-h infusions). While monotherapies achieved no killing or failed by 24 h, this rationally optimized combination achieved >5 log₁₀ bacterial killing and suppressed resistance.