Local treatment of experimental Pseudomonas aeruginosa osteomyelitis with a biodegradable dilactide polymer releasing ciprofloxacin

Are Absorbable Plates More Resistant to Infection Than Titanium Implants? An Experimental Pre-Clinical Trial in Rabbits

Background: Infection of orthopaedic implants after internal fixation of bone fractures remains a major complication with occasionally devastating consequences. Recent studies have reported that the use of absorbable materials, instead of metallic ones, may lead to a lower incidence of postoperative infection. In this experimental pre-clinical animal study, we compared the infection rate between absorbable implants consisting of copolymers composed from trimethylene carbonate, L-polylactic acid, and D, L-polylactic acid monomers, and titanium implants after the inoculation of a pathogenic microorganism. Material and Methods: We used an experimental implant-related infection model in rabbits. Sixty animals were randomly and equally divided into two groups. In all animals, the right femur was exposed via a lateral approach and a 2.5 mm two-hole titanium plate with screws (Group A), or a two-hole absorbable plate and screws (Group B), were applied in the femoral shaft. Afterwards, the implant surface was inoculated with Pseudomonas Aeruginosa at a concentration of 2 × 108 CFU/mL. The primary outcome was the comparison of the incidence of developed infection between the two groups. The wound condition was monitored on a daily basis and radiographies were obtained at 12 weeks postoperatively. Infection-related laboratory markers (white blood cell count, erythrocyte sedimentation rate, and C-reactive protein values) were assessed at 3, 6, and 16 weeks postoperatively. Histologic analysis and cultures of tissue samples were also performed to evaluate the presence of infection. Results: Clinical and laboratory signs of infection were evident in 11 rabbits in Group A (36.7%), and 4 in Group B (13.3%). The difference between the groups was statistically significant (p = 0.04). Five animals in Group B (16.7%) had clinical and histologic signs of a foreign-body reaction with significantly elevated CRP and ESR values but no simultaneous presence of infection was identified (p = 0.04). Bone remodelling with thickening of the periosteum and surrounding sclerosis was demonstrated radiologically in animals developing infection or foreign-body reactions. Conclusions: Absorbable plates and screws show lower susceptibility to infection compared to titanium ones. However, their application is associated with foreign-body reaction and the potential need for a second surgical intervention.

Staphylococcus Aureus Osteomyelitis as an Inducer of Tolerance to Escherichia Coli Pyelonephritis: an Experimental Study

The high incidence of osteomyelitis in vulnerable populations like those with multiple injuries or elderly undergoing joint arthroplasties generates the question what may be their responses to subsequent infection by high virulent isolates. Rabbits were subject to two operations at three week intervals; sham osteomyelitis and sham pyelonephritis (group S); sham osteomyelitis and Escherichia coli pyelonephritis (group P); and Staphylococcus aureus osteomyelitis and E. coli pyelonephritis (group OP). Survival was recorded; cytokine stimulation of circulating mononuclear cells (PBMCs) and tissue myeloperoxidase (MPO) activity and bacterial growth were monitored. In some experiments, dalbavancin treatment was given before pyelonephritis. Healthy PBMCs were pre-treated with bone homogenate, S. aureus or both. Mortality of groups S, P and OP after induction of pyelonephritis was 0%, 50% and 8.3% respectively. Tumour necrosis factor-alpha (TNFα) production by PBMCs was significantly lower in the OP group at 48 hours. E. coli bacterial load was similar in groups P and OP at death or sacrifice whereas the MPO activity of group OP was decreased. Production of TNFα was further decreased among dalbavancin treated rabbits; in these rabbits tissue MPO was increased. TNFα production decreased when healthy PBMCs pre-treated with bone homogenate, S. aureus (HKSA) or both were stimulated with E. coli (HKEC); production was further decreased in the presence of anti-TLR4 and anti-TLR9. It is concluded that staphylococcal osteomyelitis modulated the innate immune responses of the host leading to protection from death by highly virulent E. coli. Tolerance to TLR ligands is the most likely mechanism of action.

Use of Antibiotic Loaded Biomaterials for the Management of Bone Prosthesis Infections: Rationale and Limits

BACKGROUND

Periprosthetic joint infection still represents a challenging issue for the orthopedic community. In the United States approximately a million joint arthroplasties are performed each year, with infection rates ranging from 1 to 2%: revisions has significant implications on health care costs and appropriate resource management. The use of locally applied antibiotics as a prophylaxis measure or as a component of the therapeutic approach in primary or revision surgery is finalized at eliminating any microorganism and strengthening the effectiveness of systemic therapy.

OBJECTIVE

The present review of clinical and preclinical in vivo studies tried to identify advantages and limitations of the materials used in the clinical orthopedic practice and discuss developed biomaterials, innovative therapeutic approaches or strategies to release antibiotics in the infected environment.

METHODS

A systematic search was carried out by two independent observers in two databases (www.pubmed.com and www.scopus.com) in order to identify pre-clinical and clinical reports in the last 10 years.

RESULTS

71 papers were recognized eligible: 15 articles were clinical studies and 56 in vivo studies.

CONCLUSION

Polymethylmethacrylate was the pioneer biomaterial used to manage infections after total joint replacement. Despite its widespread use, several issues still remain debated: the methods to combine materials and antibiotics, the choice of antibiotics, releasing kinetics and antibiotics efficacy. In the last years, the interest was directed towards the selection of different antibiotics, loaded in association with more than only one class and biomaterials with special focus on delivery systems as implant surface coatings, hydrogels, ceramics, micro-carriers, microspheres or nanoparticles.

Animal models of orthopaedic infections. A review of rabbit models used to induce long bone bacterial infections

The development of infections is one of the main complications in orthopaedics, especially in the presence of implants for the osteosynthesis of compound fractures and joint prosthesis. Indeed, foreign materials and implants act as substrates for the adhesion and proliferation of bacterial strains able to produce biofilm, causing peri-implant osteomyelitis. The eradication of biofilm remains a great challenge for the host immune system, as well as for medical and surgical approaches, thus imposing the need for new prophylactic and/or therapeutic strategies in which animal models have an essential role. In vivo orthopaedic models have mainly been used to study the pathogenesis of infections, biofilm behaviour and the efficacy of antimicrobial strategies, to select diagnostic techniques and test the efficacy of novel materials or surface modifications to impede both the establishment of bone infections and the associated septic loosening of implants. Among several models of osteomyelitis and implant-related infections described in small rodents and large animals, the rabbit has been widely used as a reliable and reproducible model of orthopaedic infections. This review examines the relevance of rabbits for the development of clinically representative models by analysing the pros and cons of the different approaches published in the literature. This analysis will aid in increasing our knowledge concerning orthopaedic infections by using this species. This review will be a tool for researchers who need to approach pre-clinical studies in the field of bone infection and have to identify the most appropriate animal model to verify their scientific hypothesis.

[Comparative study of different concentrations of methicillin-resistant Staphylococcus aureus in the preparation of chronic femoral osteomyelitis models]

Objective

To investigate the appropriate concentration of methicillin-resistant Staphylococcus aureus (MRSA) in establishing chronic femoral osteomyelitis model in rabbits.

Methods

Forty-eight adult New Zealand white rabbits were randomly divided into 6 groups with 8 rabbits in each group. Animals in groups B, C, D, E, and F were injected 1×10 9, 1×10 8, 1×10 7, 1×10 6, 1×10 5 CFU/mL MRSA on the location of 2 cm of the femoral supracondyle, respectively, and group A was injected with aseptic saline as a control. The general observation were performed at 4 weeks after operation, and the wound secretions were taken for bacteriological examination. The serum C-reactive protein content was detected at preoperation and 2 weeks and 4 weeks after operation. The X-ray, CT scan, and Norden imaging scoring were performed at 4 weeks after operation. At 4 weeks after operation, the animals were sacrificed, and the specimens were observed and evaluated by general scores; and the HE staining and histological score were also performed.

Results

Five rabbits died of severe infection in group B, 2 died in group C, and no rabbit died in groups D, E, and F. General observation showed that the incision healed without soft tissue swelling in group A; most animals had visible incision swelling and sinus formation, femoral thickening, bone destruction, and damage decreased with the decreasing of the concentration of liquid bacterial in groups B-D; the infection signs were seen in groups E and F, and the degree of infection were less than that of group D. Bacteriological examination showed that fistula formation animal in groups B, C, D, and E were cultured with positive results, and with the decrease of concentration, the number of animal fistula formation decreased gradually; and bacteriological culture did not be performed in group F because of no sinus formation. There was no significant difference in the content of C-reactive protein between groups before operation ( P>0.05). The contents of C-reactive protein in groups B-F were significantly higher than those in group A at 2 and 4 weeks after operation ( P<0.05). At 4 weeks after operation, the content of C-reactive protein was in the order of groups B, C, D, E, F, and A in turn from high to low, showing significant differences between groups ( P<0.05). Imaging examination showed that there was no soft tissue swelling and bone destruction in group A; bone destruction, massive sequestrum formation, and soft tissue swelling were found in groups B and C; bone destruction was observed in groups D and E, and the degree of sequestrum formation was not as good as that in group C; and there was a small amount of bone infection in group F. The Norden scores in groups B-F were significantly higher than that in group A, and in groups B and C than those in groups D, E, and F, and in groups D and E than that in group F ( P<0.05); there was no significant difference between groups B and C, and between groups D and E ( P>0.05). The specimens general observation scores in groups B-F were significantly higher than that in group A, while in groups B and C than those in groups D, E, and F ( P<0.05); there was no significant difference between groups D, E, and F ( P>0.05). HE staining showed that the structure of bone trabecula in group A was clear and the structure was arranged neatly; in groups B-F, trabecular bone destruction and inflammatory cell infiltration were seen and the degree gradually decreased. The histological scores in groups B-F were significantly higher than that in group A, and in group B than those in groups C-F, in groups C and D than that in group F ( P<0.05); there was no significant difference between groups C, D, and E, and between groups E and F ( P>0.05).

Conclusion

The optimal MRSA concentration of rabbit model of chronic osteomyelitis of femur is between 1×10 6 and 1×10 7 CFU/mL.

Silver nanoparticle deposited implants to treat osteomyelitis

In this study, electrolytically deposited strongly adherent silver nanoparticles on stainless-steel (SS) implants were used for in situ osteomyelitis treatment. Samples were heat treated to enhance adhesion of silver on 316 L SS. Ex vivo studies were performed to measure silver-release profiles from the 316 L SS screws inserted in equine cadaver bones. No change in the release profiles of silver ions were observed in vitro between the implanted screws and the control. In vivo studies were performed using osteomyelitic rabbit model with 3 mm diameter silver-deposited 316 L SS pins at two different doses of silver: high and low. Infection control ability of the pins for treating osteomyelitis in a rabbit model was measured using bacteriologic, radiographic, histological, and scanning electron microscopic studies. Silver-coated pins, especially high dose, offered a promising result to treat infection in animal osteomyelitis model without any toxicity to major organs. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1073-1083, 2018.

A controlled release of antibiotics from calcium phosphate-coated poly(lactic-co-glycolic acid) particles and their in vitro efficacy against Staphylococcus aureus biofilm

Ceramic-polymer hybrid particles, intended for osteomyelitis treatment, were fabricated by preparing poly(lactic-co-glycolic acid) particles through an emulsion solvent evaporation technique, followed by calcium phosphate (CaP) coating via a surface adsorption-nucleation method. The presence of CaP coating on the surface of the particles was confirmed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. Subsequently, two antibiotics for treating bone infection, nafcillin (hydrophilic) and levofloxacin (amphiphilic), were loaded into these hybrid particles and their in vitro drug release studies were investigated. The CaP coating was shown to reduce burst release, while providing sustained release of the antibiotics for up to 4 weeks. In vitro bacterial study against Staphylococcus aureus demonstrated the capability of these antibiotic-loaded hybrid particles to inhibit biofilm formation as well as deteriorate established biofilm, making this hybrid system a potential candidate for further investigation for osteomyelitis treatment.

Hot melt poly-ε-caprolactone/poloxamine implantable matrices for sustained delivery of ciprofloxacin

It has been suggested that prevention and treatment of osteomyelitis could be achieved through local drug delivery using implantable devices, which provide therapeutic levels at the infection site with minimum side-effects. Physical blends of polycaprolactone (PCL) and poloxamine (Tetronic®) were prepared by applying a solvent-free hot melting approach to obtain cytocompatible implants with a tunable bioerosion rate, ciprofloxacin release profile and osteoconductive features. Differential scanning calorimetry and X-ray analysis indicate that the hydrophilic poloxamine varieties T908, T1107, and T1307 are miscible with PCL, while the hydrophobic block copolymer T1301 is immiscible. Incorporation of the block copolymer at weight ratios ranging from 25 to 75 wt.% led to matrices with viscoelastic parameters in the range of those of fresh cortical bone. Once immersed in buffer the matrices underwent a similar weight loss in the first week to the content of poloxamine, followed by a slower erosion rate due to PCL. The initial rapid erosion and the increase in porosity partially explain the observed burst of ciprofloxacin release, which is more intense in the PCL:T1301 formulation due to drug/T1301 repulsion due to polarity. The matrices sustained ciprofloxacin release for several months (<50% released after 3 months) and showed in vitro efficacy against Staphylococcus aureus, eradicating the bacteria in less than 48 h. PCL:poloxamine was cytocompatible with osteoblasts and the matrices prepared with low proportions of T908 were also compatible with mesenchymal stem cell differentiation to osteoblasts. The influence of the nature and proportion of temperature-responsive poloxamine on the performance of PCL implantable systems was determined.

Hyperbaric oxygen therapy in a mouse model of implant-associated osteomyelitis

Implant associated osteomyelitis (OM) is difficult to treat with antibiotics, and outcomes remain poor. Some reports suggest that hyperbaric oxygen treatment is a safe and effective means of treating OM. We tested this hypothesis in a murine model. Clinical isolates of methicillin-resistant Staphylococcus aureus (MRSA), Pseudomonas aeruginosa, and Klebsiella pneumoniae were used. The mice were infected with each of the three pathogens, treated with 100% oxygen at high pressure, hyperbaric oxygen (HBO), and monitored for the ability of HBO to prevent and/or clear the OM infection. Assessments included bacterial burden of the tibias and lesion scores, as well as receptor activator of NF-κB ligand (RANKL) and myeloperoxidase (MPO) concentrations. HBO resulted in more severe lesion scores and higher RANKL and MPO concentrations for MRSA. A significant positive correlation was found between RANKL concentration and lesion score. No significant difference was found with HBO in P. aeruginosa infections and K. pneumoniae seems to either not infect bone well or get cleared before establishing an infection. The model is useful for studying OM infections caused by MRSA and P. aeruginosa, but HBO does not appear to be an efficacious treatment of an implant-associated OM infection.

In vitro elution of daptomycin by a synthetic crystallic semihydrate form of calcium sulfate, stimulan

A synthetic crystallic semihydrate form of calcium sulfate, Stimulan, was evaluated as a biodegradable carrier for the daily in vitro elution of daptomycin. Daptomycin and Stimulan were admixed at a ratio of 95:5. Elution lasted for 28 days. Eluted concentrations peaked on days 1 and 11, when the mean values were 1,320.1 and 949.2 microg/ml, respectively. The lowest eluted concentration was detected on day 28. These results support the application of the system described in experimental models of osteomyelitis.

Treatment of experimental osteomyelitis caused by methicillin-resistant Staphylococcus aureus with a synthetic carrier of calcium sulphate (Stimulan) releasing moxifloxacin

The objectives of this study were to assess the efficacy of a synthetic semihydrate form of calcium sulphate (Stimulan) in experimental bone infection caused by methicillin-resistant Staphylococcus aureus (MRSA). Osteomyelitis was induced after inoculation of the test pathogen in the left tibia of 72 New Zealand rabbits assigned to the following groups: 18 control rabbits (Group A); 18 rabbits with Stimulan implanted (Group B); and 36 rabbits with moxifloxacin-impregnated Stimulan implanted (Group C). Rabbits were sacrificed at weekly intervals and cancellous bone was harvested for histopathology and for estimation of bacterial growth and concentrations of moxifloxacin. Bacterial growth from cancellous bone of Group C was significantly lower than the respective growth of Groups A and B on all days of sacrifice. The main histological finding of animals in all three groups was a moderate to intense inflammatory reaction accompanied by fibrosis. The degree of fibrosis was higher in Group C compared with both other groups. Infiltration by giant cells was also observed, which was greater in Group C on Day 42. Antibiotic levels in bone were higher for bone samples closer to the site of implantation. In conclusion, Stimulan admixed with 10% moxifloxacin was very effective in achieving complete eradication of the causative pathogen in experimental osteomyelitis caused by MRSA.