Dynamic Mechanisms of the Bactericidal Action of an Al2O3-TiO2-Ag Granular Material on an Escherichia coli Strain

Antimicrobial Agents Based on Metal Complexes: Present Situation and Future Prospects

The rise in antimicrobial resistance is a cause of serious concern since the ages. Therefore, a dire need to explore new antimicrobial entities that can combat against the increasing threat of antibiotic resistance is realized. Studies have shown that the activity of the strongest antibiotics has reduced drastically against many microbes such as microfungi and bacteria (Gram-positive and Gram-negative). A ray of hope, however, was witnessed in early 1940s with the development of new drug discovery and use of metal complexes as antibiotics. Many new metal-based drugs were developed from the metal complexes which are potentially active against a number of ailments such as cancer, malaria, and neurodegenerative diseases. Therefore, this review is an attempt to describe the present scenario and future development of metal complexes as antibiotics against wide array of microbes.

A review on silver-mediated DNA base pairs: methodology and application

The investigation of the interaction between metal ions and DNA has always attracted much attention in the fields of bioinorganic chemistry, supramolecular coordination chemistry, and DNA nanotechnology. Its mode of action can be simply divided into two aspects. On the one hand, it is non-specific electrostatic adsorption, mainly including Na⁺, K⁺, Mg²⁺, Ca²⁺ and other physiologically regulating ions; on the other hand, it is specific covalent binding, such as Pt²⁺, Hg²⁺, Ag⁺ and other heavy metal ions. This article focuses on the mechanism of action between Ag⁺ and DNA mismatch pair C-C, and summarizes its main characterization methods and various applications. It aims to provide a certain reference for the field of biological devices. With the development of cryo-electron microscopy and liquidcell TEM, the structure of C-Ag⁺-C is expected to be further characterized, which will be more widely used.

Arabic gum plus colistin coated moxifloxacin-loaded nanoparticles for the treatment of bone infection caused by Escherichia coli

Osteomyelitis is an inflammatory process of bone and bone marrow that may even lead to patient death. Even though this disease is mainly caused by Gram-positive organisms, the proportion of bone infections caused by Gram-negative bacteria, such as Escherichia coli, has significantly increased in recent years. In this work, mesoporous silica nanoparticles have been employed as platform to engineer a nanomedicine able to eradicate E. coli- related bone infections. For that purpose, the nanoparticles have been loaded with moxifloxacin and further functionalized with Arabic gum and colistin (AG+CO-coated MX-loaded MSNs). The nanosystem demonstrated high affinity toward E. coli biofilm matrix, thanks to AG coating, and marked antibacterial effect because of the bactericidal effect of moxifloxacin and the disaggregating effect of colistin. AG+CO-coated MX-loaded MSNs were able to eradicate the infection developed on a trabecular bone in vitro and showed pronounced antibacterial efficacy in vivo against an osteomyelitis provoked by E. coli. Furthermore, AG+CO-coated MX-loaded MSNs were shown to be essentially non-cytotoxic with only slight effect on cell proliferation and mild hepatotoxicity, which might be attributed to the nature of both antibiotics. In view of these results, these nanoparticles may be considered as a promising treatment for bone infections caused by enterobacteria, such as E. coli, and introduce a general strategy against bone infections based on the implementation of antibiotics with different but complementary activity into a single nanocarrier. STATEMENT OF SIGNIFICANCE: In this work, we propose a methodology to address E.coli bone infections by using moxifloxacin-loaded mesoporous silica nanoparticles coated with Arabic gum containing colistin (AG+CO-coated MX-loaded MSNs). The in vitro evaluation of this nanosystem demonstrated high affinity toward E. coli biofilm matrix thanks to the Arabic gum coating, a disaggregating and antibacterial effect of colistin, and a remarkable antibiofilm action because of the bactericidal ability of moxifloxacin and colistin. This anti-E. coli capacity of AG+CO-coated MX-loaded MSNs was brought out in an in vivo rabbit model of osteomyelitis where the nanosystem was able to eradicate more than 90% of the bacterial load within the infected bone.

Analyses of the Effect of Peptidoglycan on Photocatalytic Bactericidal Activity Using Different Growth Phases Cells of Gram-Positive Bacterium and Spheroplast Cells of Gram-Negative Bacterium

We conducted photocatalytic experiments focusing on the peptidoglycan layer to elucidate the details of the mechanism of photocatalytic sterilization. The previous study of our laboratory suggested that the presence of the peptidoglycan layer increases the bactericidal effect. To further verify it, the following experiments were performed: experiments on cells with different peptidoglycan layer thickness used Lactobacillus plantarum cells with different growth phases, experiments on cells with the thin peptidoglycan layer used Escherichia coli cells and spheroplast cells from which the peptidoglycan layer was removed from E. coli cells. The bactericidal effects increased as the growth progresses of L. plantarum. It was confirmed by TEM that the thickness of the peptidoglycan layer increased with cell growth. The survival rates of E. coli intact cells were significantly lower than those of spheroplast cells. These results strongly suggest that the peptidoglycan layer enhances the photocatalytic bactericidal effect. As a result of allowing the photocatalytic reaction to act on peptidoglycan, the amount of hydroxyl radical was smaller, and the amount of hydrogen peroxide was higher than in the absence of peptidoglycan. It is suggested that peptidoglycan may convert produced hydroxyl radical to hydrogen peroxide.

New Antimicrobial Strategies Based on Metal Complexes

Traditional organic antimicrobials mainly act on specific biochemical processes such as replication, transcription and translation. However, the emergence and wide spread of microbial resistance is a growing threat for human beings. Therefore, it is highly necessary to design strategies for the development of new drugs in order to target multiple cellular processes that should improve their efficiency against several microorganisms, including bacteria, viruses or fungi. The present review is focused on recent advances and findings of new antimicrobial strategies based on metal complexes. Recent studies indicate that some metal ions cause different types of damages to microbial cells as a result of membrane degradation, protein dysfunction and oxidative stress. These unique modes of action, combined with the wide range of three-dimensional geometries that metal complexes can adopt, make them suitable for the development of new antimicrobial drugs.

Electrospun Fibers and Sorbents as a Possible Basis for Effective Composite Wound Dressings

Skin burns and ulcers are considered hard-to-heal wounds due to their high infection risk. For this reason, designing new options for wound dressings is a growing need. The objective of this work is to investigate the properties of poly (ε-caprolactone)/poly (vinyl-pyrrolidone) (PCL/PVP) microfibers produced via electrospinning along with sorbents loaded with Argovit™ silver nanoparticles (Ag-Si/Al2O3) as constituent components for composite wound dressings. The physicochemical properties of the fibers and sorbents were characterized using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and inductively coupled plasma optical emission spectroscopy (ICP-OES). The mechanical properties of the fibers were also evaluated. The results of this work showed that the tested fibrous scaffolds have melting temperatures suitable for wound dressings design (58-60 °C). In addition, they demonstrated to be stable even after seven days in physiological solution, showing no macroscopic damage due to PVP release at the microscopic scale. Pelletized sorbents with the higher particle size demonstrated to have the best water uptake capabilities. Both, fibers and sorbents showed antimicrobial activity against Gram-negative bacteria Pseudomona aeruginosa and Escherichia coli, Gram-positive Staphylococcus aureus and the fungus Candida albicans. The best physicochemical properties were obtained with a scaffold produced with a PCL/PVP ratio of 85:15, this polymeric scaffold demonstrated the most antimicrobial activity without affecting the cell viability of human fibroblast. Pelletized Ag/Si-Al2O3-3 sorbent possessed the best water uptake capability and the higher antimicrobial activity, over time between all the sorbents tested. The combination of PCL/PVP 85:15 microfibers with the chosen Ag/Si-Al2O3-3 sorbent will be used in the following work for creation of wound dressings possessing exudate retention, biocompatibility and antimicrobial activity.

Antibacterial effect of TiO2 :Cu:Ag thin coatings on Pseudomonas strain measured by microbiological and ATP assays

The aim of this study is to investigate the antimicrobial properties of nanocomposite thin TiO₂ :Cu:Ag films on Pseudomonas putida as a natural isolate and an opportunistic pathogen. Several different methods were used to compare the antibacterial effect of thin TiO₂ :Cu:Ag layers obtained by radiofrequency magnetron sputter deposition against P. putida: optical density of the bacterial suspension, most probable number of survived cells, dehydrogenase activity inhibition, scanning electron microscopy images, atomic flame absorption spectroscopy, and adenosine triphosphate (ATP) luminescent assay. Optical density measurements and most probable plate count were in agreement and showed a strong bactericidal effect of the as-deposited and only bacteriostatic effect of the annealed coatings with the same metal content on tested bacteria. As the metal quantity in the medium rises during the first hour of the experiment, it could be suggested that this is the main reason for cell death. ATP-luminescent assay showed up to 18-fold reduction of the signal. It was compared with other microbiological and biochemical assays to prove the strong antibacterial effect of nanocomposite thin TiO₂ :Cu:Ag coatings with the possibilities of medical applications. Protection of medical devices against infections is a significant current challenge raised by an increasing number of medical devices-associated infections and microbial resistance to conventional antibiotic and multidrug treatments. Deposition of antimicrobial coatings is one of the current approaches to mitigate the problem.

Curcumin loaded nanoparticles as efficient photoactive formulations against gram-positive and gram-negative bacteria

The constant increase in multi-resistant bacterial strains and the decline in the number of newly approved antibiotics necessitate the development of alternative approaches to antibiotic treatment. In this study, a modern alternative approach to antibiotic therapy using photosensitiser encapsulated polymeric nanoparticles is presented. Cationic nanoparticles were prepared using a biodegradable and biocompatible polymer poly (lactic-co-glycolic acid), a stabiliser poly (vinyl alcohol) and chitosan. Dynamic light scattering and laser Doppler anemometry were used to determine particle size distribution and ζ-potential respectively. To quantify the antibacterial photodynamic effect of the nanoparticles, in vitro studies were performed using Staphylococcus saprophyticus subsp. bovis and Escherichia coli DH5 alpha to represent both a gram-positive as well as a gram-negative strain. It was demonstrated that the particle ζ-potential significantly influenced the antibacterial phototoxicity, gaining up to 3 log₁₀ higher efficacy for chitosan coated nanoparticles. Furthermore, neither irradiation alone nor curcumin in absence of light led to a significant growth reduction, confirming the photodynamic effect of curcumin. Electron microscopy has been used to study the morphological characteristics of the nanoparticles as well as their interaction with bacteria and the changes of bacterial morphology and ultrastructure upon photodynamic treatment. An increased adherence of the chitosan modified nanoparticles to the bacteria and structural damage upon photodynamic treatment was clearly evident and confirmed the results from in vitro studies.

Evaluation of E. coli inhibition by plain and polymer-coated silver nanoparticles

Escherichia coli causes various ailments such as septicemia, enteritis, foodborne illnesses, and urinary tract infections which are of concern in the public health field due to antibiotic resistance. Silver nanoparticles (AgNP) are known for their biocompatibility and antibacterial activity, and may prove to be an alternative method of treatment, especially as wound dressings. In this study, we compared the antibacterial efficacy of two polymer-coated silver nanoparticles either containing 10% Ag (Ag 10% + Polymer), or 99% Ag (AgPVP) in relation to plain uncoated silver nanoparticles (AgNP). Atomic force microscopy was used to characterize the nanoparticles, and their antibacterial efficacy was compared by the minimum inhibitory concentration (MIC) and bacterial growth curve assays, followed by molecular studies using scanning electron microscopy (SEM) and (qRT- PCR). AgNP inhibited the growth of E. coli only at 0.621 mg/mL, which was double the concentration required for both coated nanoparticles (0.312 mg/mL). Similarly, bacterial growth was impeded as early as 8 h at 0.156 mg/mL of both coated nanoparticles as compared to 0.312 mg/mL for plain AgNP. SEM data showed that nanoparticles damaged the cell membrane, resulting in bacterial cell lysis, expulsion of cellular contents, and complete disintegration of some cells. The expression of genes associated with the TCA cycle (aceF and frdB) and amino acid metabolism (gadB, metL, argC) were substantially downregulated in E. coli treated with nanoparticles. The reduction in the silver ion (Ag+) concentration of polymer-coated AgNP did not affect their antibacterial efficacy against E. coli.

High photodegradation and antibacterial activity of BN–Ag/TiO2 composite nanofibers under visible light

To develop material with good photocatalytic properties for organic compound degradation and bacterial removal, we produced Ag/TiO₂ and BN–Ag/TiO₂ composite nanofibers that included controlled amounts of boron nitride (BN) nanosheets and silver (Ag).