Development of a method for markerless gene deletion in Pseudomonas putida

Establishment of low-cost production platforms of polyhydroxyalkanoate bioplastics from Halomonas cupida J9

Microbial production of polyhydroxyalkanoate (PHA) is greatly restricted by high production cost arising from high-temperature sterilization and expensive carbon sources. In this study, a low-cost PHA production platform was established from Halomonas cupida J9. First, a marker-less genome-editing system was developed in H. cupida J9. Subsequently, H. cupida J9 was engineered to efficiently utilize xylose for PHA biosynthesis by introducing a new xylose metabolism module and blocking xylonate production. The engineered strain J9UΔxylD-P8xylA has the highest PHA yield (2.81 g/L) obtained by Halomonas with xylose as the sole carbon source so far. This is the first report on the production of short- and medium-chain-length (SCL-co-MCL) PHA from xylose by Halomonas. Interestingly, J9UΔxylD-P8xylA was capable of efficiently utilizing glucose and xylose as co-carbon sources for PHA production. Furthermore, fed-batch fermentation of J9UΔxylD-P8xylA coupled to a glucose/xylose co-feeding strategy reached up to 12.57 g/L PHA in a 5-L bioreactor under open and unsterile condition. Utilization of corn straw hydrolysate as the carbon source by J9UΔxylD-P8xylA reached 7.0 g/L cell dry weight (CDW) and 2.45 g/L PHA in an open fermentation. In summary, unsterile production in combination with inexpensive feedstock highlights the potential of the engineered strain for the low-cost production of PHA from lignocellulose-rich agriculture waste.

Establishing a straightforward I-SceI-mediated recombination one-plasmid system for efficient genome editing in P. putida KT2440

Pseudomonas putida has become an increasingly important chassis for producing valuable bioproducts. This development is not least due to the ever-improving genetic toolbox, including gene and genome editing techniques. Here, we present a novel, one-plasmid design of a critical genetic tool, the pEMG/pSW system, guaranteeing one engineering cycle to be finalized in 3 days. The pEMG/pSW system proved in the last decade to be valuable for targeted genome engineering in Pseudomonas, as it enables the deletion of large regions of the genome, the integration of heterologous gene clusters or the targeted generation of point mutations. Here, to expedite genetic engineering, two alternative plasmids were constructed: (1) The sacB gene from Bacillus subtilis was integrated into the I-SceI expressing plasmid pSW-2 as a counterselection marker to accelerated plasmid curing; (2) double-strand break introducing gene I-sceI and sacB counterselection marker were integrated into the backbone of the original pEMG vector, named pEMG-RIS. The single plasmid of pEMG-RIS allows rapid genome editing despite the low transcriptional activity of a single copy of the I-SceI encoding gene. Here, the usability of the pEMG-RIS is shown in P. putida KT2440 by integrating an expression cassette including an msfGFP gene in 3 days. In addition, a large fragment of 12.1 kb was also integrated. In summary, we present an updated pEMG/pSW genome editing system that allows efficient and rapid genome editing in P. putida. All plasmids designed in this study will be available via the Addgene platform.

γ-Glutamylation of Isopropylamine by Fermentation

Glutamylation yields N-functionalized amino acids in several natural pathways. γ-Glutamylated amino acids may exhibit improved properties for their industrial application, e. g., as taste enhancers or in peptide drugs. γ-Glutamyl-isopropylamide (GIPA) can be synthesized from isopropylamine (IPA) and l-glutamate. In Pseudomonas sp. strain KIE171, GIPA is an intermediate in the biosynthesis of l-alaninol (2-amino-1-propanol), a precursor of the fluorochinolone antibiotic levofloxacin and of the chloroacetanilide herbicide metolachlor. In this study, fermentative production of GIPA with metabolically engineered Pseudomonas putida KT2440 using γ-glutamylmethylamide synthetase (GMAS) from Methylorubrum extorquens was established. Upon addition of IPA during growth with glycerol as carbon source in shake flasks, the recombinant strain produced up to 21.8 mM GIPA. In fed-batch bioreactor cultivations, GIPA accumulated to a titer of 11 g L-1 with a product yield of 0.11 g g-1 glycerol and a volumetric productivity of 0.24 g L-1  h-1 . To the best of our knowledge, this is the first fermentative production of GIPA.

Establishment of synthetic microbial consortia with Corynebacterium glutamicum and Pseudomonas putida: Design, construction, and application to production of γ-glutamylisopropylamide and l-theanine

Microbial synthetic consortia are a promising alternative to classical monoculture for biotechnological applications and fermentative processes. Their versatile use offers advantages in the degradation of complex substrates, the allocation of the metabolic burden between individual partners, or the division of labour in energy utilisation, substrate supply or product formation. Here, stable synthetic consortia between the two industrially relevant production hosts, Pseudomonas putida KT2440 and Corynebacterium glutamicum ATCC13032, were established for the first time. By applying arginine auxotrophy/overproduction and/or formamidase-based utilisation of the rare nitrogen source formamide, different types of interaction were realised, such as commensal relationships (+/0 and 0/+) and mutualistic cross-feeding (+/+). These consortia did not only show stable growth but could also be used for fermentative production of the γ-glutamylated amines theanine and γ-glutamyl-isopropylamide (GIPA). The consortia produced up to 2.8 g L-1 of GIPA and up to 2.6 g L-1 of theanine, a taste-enhancing constituent of green tea leaves. Thus, the advantageous approach of using synthetic microbial consortia for fermentative production of value-added compounds was successfully demonstrated.

Metabolic engineering of genome-streamlined strain Pseudomonas putida KTU-U27 for medium-chain-length polyhydroxyalkanoate production from xylose and cellobiose

Bio-based plastics polyhydroxyalkanoates (PHAs) are considered as a good substitutive to traditional fossil-based plastics because PHAs outcompete chemical plastics in several important properties, such as biodegradability, biocompatibility, and renewability. However, the industrial production of PHA (especially medium-chain-length PHA, mcl-PHA) is greatly restricted by the cost of carbon sources. Currently, xylose and cellobiose derived from lignocellulose are potential substrates for mcl-PHA production. In this study, Pseudomonas putida KTU-U27, a genome-streamlined strain derived from a mcl-PHA producer P. putida KT2440, was used as the optimal chassis for the construction of microbial cell factories with the capacity to efficiently produce mcl-PHA from xylose and cellobiose by introducing the xylose and cellobiose metabolism modules and enhancing the transport of xylose and cellobiose. The lag phases of the xylose- and cellobiose-grown engineered strains were almost completely eliminated and the xylose- and cellobiose-utilizing performance was greatly improved via adaptive laboratory evolution. In shake-flask fermentation, the engineered strain 27A-P13-xylABE-Ptac-tt and 27A-P13-bglC-P13-gts had a mcl-PHA content of 41.67 wt% and 45.18 wt%, respectively, and were able to efficiently utilize xylose or cellobiose as the sole carbon source for cell growth. Herein, microbial production of mcl-PHA using xylose as the sole carbon source has been demonstrated for the first time. Meanwhile, the highest yield of mcl-PHA produced from cellobiose has been obtained in this study. Interestingly, the engineered strains derived from genome-reduced P. putida strains showed higher xylose- and cellobiose-utilizing performance and higher PHA yield than those derived from P. putida KT2440. This study highlights enormous potential of the engineered strains as promising platforms for low-cost production of mcl-PHA from xylose- and cellobiose-rich substrates.

Polyhydroxyalkanoate production in Pseudomonas putida from alkanoic acids of varying lengths

Many studies have been conducted to produce microbial polyhydroxyalkanoates (PHA), a biopolymer, from Pseudomonas sp. fed with various alkanoic acids. Because this previous data was collected using methodologies that varied in critical aspects, such as culture media and size range of alkanoic acids, it has been difficult to compare the results for a thorough understanding of the relationship between feedstock and PHA production. Therefore, this study utilized consistent culture media with a wide range of alkanoic acids (C7-C14) to produce medium chain length PHAs. Three strains of Pseudomonas putida (NRRL B-14875, KT2440, and GN112) were used, and growth, cell dry weight, PHA titer, monomer distribution, and molecular weights were all examined. It was determined that although all the strains produced similar PHA titers using C7-C9 alkanoic acids, significant differences were observed with the use of longer chain feedstocks. Specifically, KT2440 and its derivative GN112 produced higher PHA titers compared to B-14875 when fed longer chain alkanoates. We also compared several analytical techniques for determining amounts of PHA and found they produced different results. In addition, the use of an internal standard had a higher risk of calculating inaccurate concentrations compared to an external standard. These observations highlight the importance of considering this aspect of analysis when evaluating different studies.

Creating an efficient 1,2-dichloroethane-mineralizing bacterium by a combination of pathway engineering and promoter engineering

Currently, 1,2-dichloroethane (DCA) is frequently detected in groundwater and has been listed as a potential human carcinogen by the U.S. EPA. Owing to its toxicity and recalcitrant nature, inefficient DCA mineralization has become a bottleneck of DCA bioremediation. In this study, the first engineered DCA-mineralizing strain KTU-P8DCA was constructed by functional assembly of DCA degradation pathway and enhancing pathway expression with a strong promoter P8 in the biosafety strain Pseudomonas putida KT2440. Strain KTU-P8DCA can metabolize DCA to produce CO₂ and utilize DCA as the sole carbon source for cell growth by quantifying ¹³C stable isotope ratios in collected CO₂ and in lyophilized cells. Strain KTU-P8DCA exhibited superior tolerance to high concentrations of DCA. Excellent genetic stability was also observed in continuous passage culture. Therefore, strain KTU-P8DCA has enormous potential for use in bioremediation of sites heavily contaminated with DCA. In the future, our strategy for pathway construction and optimization is expected to be developed as a standard pipeline for creating a wide variety of new contaminants-mineralizing microorganisms. The present study also highlights the power of synthetic biology in creating novel degraders for environmental remediation.

Bacterial genome reductions: Tools, applications, and challenges

Bacterial cells are widely used to produce value-added products due to their versatility, ease of manipulation, and the abundance of genome engineering tools. However, the efficiency of producing these desired biomolecules is often hindered by the cells’ own metabolism, genetic instability, and the toxicity of the product. To overcome these challenges, genome reductions have been performed, making strains with the potential of serving as chassis for downstream applications. Here we review the current technologies that enable the design and construction of such reduced-genome bacteria as well as the challenges that limit their assembly and applicability. While genomic reductions have shown improvement of many cellular characteristics, a major challenge still exists in constructing these cells efficiently and rapidly. Computational tools have been created in attempts at minimizing the time needed to design these organisms, but gaps still exist in modelling these reductions in silico. Genomic reductions are a promising avenue for improving the production of value-added products, constructing chassis cells, and for uncovering cellular function but are currently limited by their time-consuming construction methods. With improvements to and the creation of novel genome editing tools and in silico models, these approaches could be combined to expedite this process and create more streamlined and efficient cell factories.

Development of a Markerless Deletion Mutagenesis System in Nitrate-Reducing Bacterium Rhodanobacter denitrificans

Rhodanobacter has been found as the dominant genus in aquifers contaminated with high concentrations of nitrate and uranium in Oak Ridge, TN, USA. The in situ stimulation of denitrification has been proposed as a potential method to remediate nitrate and uranium contamination. Among the Rhodanobacter species, Rhodanobacter denitrificans strains have been reported to be capable of denitrification and contain abundant metal resistance genes. However, due to the lack of a mutagenesis system in these strains, our understanding of the mechanisms underlying low-pH resistance and the ability to dominate in the contaminated environment remains limited. Here, we developed an in-frame markerless deletion system in two R. denitrificans strains. First, we optimized the growth conditions, tested antibiotic resistance, and determined appropriate transformation parameters in 10 Rhodanobacter strains. We then deleted the upp gene, which encodes uracil phosphoribosyltransferase, in R. denitrificans strains FW104-R3 and FW104-R5. The resulting strains were designated R3_Δupp and R5_Δupp and used as host strains for mutagenesis with 5-fluorouracil (5-FU) resistance as the counterselection marker to generate markerless deletion mutants. To test the developed protocol, the narG gene encoding nitrate reductase was knocked out in the R3_Δupp and R5_Δupp host strains. As expected, the narG mutants could not grow in anoxic medium with nitrate as the electron acceptor. Overall, these results show that the in-frame markerless deletion system is effective in two R. denitrificans strains, which will allow for future functional genomic studies in these strains furthering our understanding of the metabolic and resistance mechanisms present in Rhodanobacter species. IMPORTANCE Rhodanobacter denitrificans is capable of denitrification and is also resistant to toxic heavy metals and low pH. Accordingly, the presence of Rhodanobacter species at a particular environmental site is considered an indicator of nitrate and uranium contamination. These characteristics suggest its future potential application in bioremediation of nitrate or concurrent nitrate and uranium contamination in groundwater ecosystems. Due to the lack of genetic tools in this organism, the mechanisms of low-pH and heavy metal resistance in R. denitrificans strains remain elusive, which impedes its use in bioremediation strategies. Here, we developed a genome editing method in two R. denitrificans strains. This work marks a crucial step in developing Rhodanobacter as a model for studying the diverse mechanisms of low-pH and heavy metal resistance associated with denitrification.

Enhanced production of polyhydroxyalkanoates in Pseudomonas putida KT2440 by a combination of genome streamlining and promoter engineering

Polyhydroxyalkanoates (PHAs), a class of bioplastics produced by a variety of microorganisms, have become the ideal alternatives for oil-derived plastics due to their superior physicochemical and material characteristics. Pseudomonas putida KT2440 can produce medium-chain-length PHA (mcl-PHA) from various substrates. In this study, a novel strategy of the large-scale deletion of genomic islands (GIs) coupling with promoter engineering was developed in P. putida KT2440 for constructing the minimal genome cell factories (MGF) capable of efficiently producing mcl-PHA. Firstly, P. putida KTU-U13, a 13 GIs- and upp-deleted mutant derived from the parental strain P. putida KT2440, was used as a starting strain for further deletion of GIs to generate a series of genome-reduced strains. Subsequently, the two minimal genome strains KTU-U24 and KTU-U27, which had a 7.19% and 8.35% reduction relative to the genome size of KT2440 and were advantageous over the strain KTU (KT2440∆upp) and KTU-U13 in several physiological traits such as the maximum specific growth rate, plasmid transformation efficiency, heterologous protein expression capacity and PHA production capacity, were selected as the chassis cells for PHA metabolic engineering. To prevent the formation of the by-product gluconic acid, the glucose dehydrogenase gene was deleted in KTU-U24 and KTU-U27, resulting in KTU-U24∆gcd and KTU-U27∆gcd. To enhance the transcriptional level of PHA synthase genes (phaC) and the supply of the precursor acetyl-CoA, a strong endogenous promoter P46 was inserted into upstream of the phaC operon and pyruvate dehydrogenase gene in the genome of KTU-U24∆gcd and KTU-U27∆gcd, to generate KTU-U24∆gcd-P46CA and KTU-U27∆gcd-P46CA, with the PHA yield of 50.5 wt% and 53.8 wt% (weight percent of PHA in cell dry weight). Finally, KTU-U27∆gcd-P46CA, the most minimal KT2440 chassis currently available, was able to accumulate the PHA to 55.82 wt% in a 5-l fermentor, which is the highest PHA yield obtained with P. putida KT2440 so far. This study suggests that genome streamlining in combination with promoter engineering may be a feasible strategy for the development of the MGF for the efficient production of high value products. Moreover, further streamlining of the P. putida KT2440 genome has great potential to create the optimal chassis for synthetic biology applications.

Development of a novel promoter engineering-based strategy for creating an efficient para-nitrophenol-mineralizing bacterium

A toxic and persistent pollutant para-nitrophenol (PNP) enters into the environment through improper industrial waste treatment and agricultural usage of chemical pesticides, leading to a potential risk to humans. Although a variety of PNP-degrading bacteria have been isolated, their application in bioremediation has been precluded due to unknown biosafety, poor PNP-mineralizing capacity, and lack of genome editing tools. In this study, a novel promoter engineering-based strategy is developed for creating efficient PNP-mineralizing bacteria. Initially, a complete PNP biodegradation pathway from Pseudomonas sp. strain WBC-3 was introduced into the genome of a biosafety and soil-dwelling bacterium Pseudomonas putida KT2440. Subsequently, five strong promoters were identified from P. putida KT2440 by transcriptome analysis and strength characterization, and each of the five promoters was independently inserted into upstream of the pnp operon in the KT2440 genome. Consequently, a P8 promoter-substituted mutant strain showed the highest PNP degradation rate and strong tolerance against high concentrations of PNP. Furthermore, when using P8 promoter to regulate the transcription of all PNP degradation genes pnpABCDEF, the complete and efficient PNP mineralization was demonstrated by stable isotope ¹³C-labeled PNP transformation assay. Additionally, the finally constructed KTU-P8pnp can be monitored using integrated GFP on chromosome. This strategy of a combination of pathway construction and promoter engineering should open new avenues for creating efficient degraders for bioremediation.

A promoter engineering-based strategy enhances polyhydroxyalkanoate production in Pseudomonas putida KT2440

Polyhydroxyalkanoate (PHA), a class of biopolyester synthesized by various bacteria, is considered as an alternative to petroleum-based plastics because of its excellent physochemical and material properties. Pseudomonas putida KT2440 can produce medium-chain-length PHA (mcl-PHA) from glucose, fatty acid and glycerol, and its whole-genome sequences and cellular metabolic networks have been intensively researched. In this study, we aim to improve the PHA yield of P. putida KT2440 using a novel promoter engineering-based strategy. Unlike previous studies, endogenous strong promoters screening from P. putida KT2440 instead of synthetic or exogenous promoters was applied to the optimization of PHA biosynthesis pathway. Based on RNA-seq and promoter prediction, 30 putative strong promoters from P. putida KT2440 were identified. Subsequently, the strengths of these promoters were characterized by reporter gene assays. Furthermore, each of 10 strong promoters screened by transcriptional level and GFP fluorescence was independently inserted into upstream of PHA synthase gene (phaC1) on chromosome. As a result, the transcriptional levels of the phaC1 and phaC2 genes in almost all of the promoter-substituted strains were improved, and the relative PHA yields of the three promoter-substituted strains KTU-P1C1, KTU-P46C1 and KTU-P51C1 were improved obviously, reaching 30.62 wt%, 33.24 wt% and 33.29 wt% [the ratio of PHA weight to cell dry weight (CDW)], respectively. By further deletion of the glucose dehydrogenase gene in KTU-P1C1, KTU-P46C1 and KTU-P51C1, the relative PHA yield of the resulting mutant strain KTU-P46C1-∆gcd increased by 5.29% from 33.24% to 38.53%. Finally, by inserting P46 into upstream of pyruvate dehydrogenase gene in the genome of KTU-P46C1-∆gcd, the relative PHA yield and CDW of the resulting strain KTU-P46C1A-∆gcd reached nearly 42 wt% and 4.06 g/l, respectively, which increased by 90% and 40%, respectively, compared with the starting strain KTU. In particular, the absolute PHA yield of KTU-P46C1A-∆gcd reached 1.7 g/l, with a 165% improvement compared with the strain KTU. Herein, we report the highest PHA yield obtained by P. putida KT2440 in shake-flask fermentation to date. We demonstrate for the first time the effectiveness of endogenous strong promoters for improving the PHA yield and biomass of P. putida KT2440. More importantly, our findings highlight great potential of this strategy for enhanced production of secondary metabolites and heterologous proteins in P. putida KT2440.

Metabolic Engineering of Pseudomonas putida for Fermentative Production of l-Theanine

N-alkylated amino acids are intermediates of natural biological pathways and can be found incorporated in peptides or have physiological roles in their free form. The N-ethylated amino acid l-theanine shows taste-enhancing properties and health benefits. It naturally occurs in green tea as major free amino acid. Isolation of l-theanine from Camilla sinensis shows low efficiency, and chemical synthesis results in a racemic mixture. Therefore, biochemical approaches for the production of l-theanine gain increasing interest. Here, we describe metabolic engineering of Pseudomonas putida KT2440 for the fermentative production of l-theanine from monoethylamine and carbon sources glucose, glycerol, or xylose using heterologous enzymes from Methylorubrum extorquens for l-theanine production and heterologous enzymes from Caulobacter crescentus for growth with xylose. l-Theanine (15.4 mM) accumulated in shake flasks with minimal medium containing monoethylamine and glucose, 15.2 mM with glycerol and 7 mM with xylose. Fed-batch bioreactor cultures yielded l-theanine titers of 10 g L^-1 with glucose plus xylose, 17.2 g L^-1 with glycerol, 4 g L^-1 with xylose, and 21 g L^-1 with xylose plus glycerol, respectively. To the best of our knowledge, this is the first l-theanine process using P. putida and the first compatible with the use of various alternative carbon sources.

Challenges and opportunities in biological funneling of heterogeneous and toxic substrates beyond lignin

Significant developments in the understanding and manipulation of microbial metabolism have enabled the use of engineered biological systems toward a more sustainable energy and materials economy. While developments in metabolic engineering have primarily focused on the conversion of carbohydrates, substantial opportunities exist for using these same principles to extract value from more heterogeneous and toxic waste streams, such as those derived from lignin, biomass pyrolysis, or industrial waste. Funneling heterogeneous substrates from these streams toward valuable products, termed biological funneling, presents new challenges in balancing multiple catabolic pathways competing for shared cellular resources and engineering against perturbation from toxic substrates. Solutions to many of these challenges have been explored within the field of lignin valorization. This perspective aims to extend beyond lignin to highlight the challenges and discuss opportunities for use of biological systems to upgrade previously inaccessible waste streams.

Stepwise genetic engineering of Pseudomonas putida enables robust heterologous production of prodigiosin and glidobactin A

Polyketide synthases (PKS) and nonribosomal peptide synthetases (NRPS) comprise biosynthetic pathways that provide access to diverse, often bioactive natural products. Metabolic engineering can improve production metrics to support characterization and drug-development studies, but often native hosts are difficult to genetically manipulate and/or culture. For this reason, heterologous expression is a common strategy for natural product discovery and characterization. Many bacteria have been developed to express heterologous biosynthetic gene clusters (BGCs) for producing polyketides and nonribosomal peptides. In this article, we describe tools for using Pseudomonas putida, a Gram-negative soil bacterium, as a heterologous host for producing natural products. Pseudomonads are known to produce many natural products, but P. putida production titers have been inconsistent in the literature and often low compared to other hosts. In recent years, synthetic biology tools for engineering P. putida have greatly improved, but their application towards production of natural products is limited. To demonstrate the potential of P. putida as a heterologous host, we introduced BGCs encoding the synthesis of prodigiosin and glidobactin A, two bioactive natural products synthesized from a combination of PKS and NRPS enzymology. Engineered strains exhibited robust production of both compounds after a single chromosomal integration of the corresponding BGC. Next, we took advantage of a set of genome-editing tools to increase titers by modifying transcription and translation of the BGCs and increasing the availability of auxiliary proteins required for PKS and NRPS activity. Lastly, we discovered genetic modifications to P. putida that affect natural product synthesis, including a strategy for removing a carbon sink that improves product titers. These efforts resulted in production strains capable of producing 1.1 g/L prodigiosin and 470 mg/L glidobactin A.

Development of an efficient pathway construction strategy for rapid evolution of the biodegradation capacity of Pseudomonas putida KT2440 and its application in bioremediation

In this work, we developed an efficient pathway construction strategy, consisting of DNA assembler-assisted pathway assembly and counterselection system-based chromosomal integration, for the rapid and efficient integration of synthetic biodegradation pathways into the chromosome of Pseudomonas putida KT2440. Using this strategy, we created a novel degrader capable of complete mineralization of γ-hexachlorocyclohexane (γ-HCH) and 1,2,3-trichloropropane (TCP) by integrating γ-HCH and TCP biodegradation pathways into the chromosome of P. putida KT2440. Furthermore, the chromosomal integration efficiencies of γ-HCH and TCP biodegradation pathways were improved to 50% and 41.6% in P. putida KT2440, respectively, by the inactivation of a type I DNA restriction-modification system. The currently developed pathway construction strategy coupled with the mutant KTUΔhsdRMS will facilitate implantation of heterologous catabolic pathways into the chromosome for rapid evolution of the biodegradation capacity of P. putida. More importantly, the successful removal of γ-HCH (10 mg/kg soil) and TCP (0.2 mM) from soil and wastewater within 14 days, respectively, highlighted the potential of the novel degrader for in situ bioremediation of γ-HCH- and TCP-contaminated sites. Moreover, chromosomal integration of gfp made the degrader to be monitored easily during bioremediation. In the future, this strategy can be expanded to a broad range of bacterial species for widespread applications in bioremediation.

Development and application of a highly efficient CRISPR-Cas9 system for genome engineering in Bacillus megaterium

Bacillus megaterium has become increasingly important for the biotechnological production of valuable compounds of industrial and pharmaceutical importance. Despite recent advances in rational strain design of B. megaterium, these studies have been largely impaired by the lack of molecular tools that are not state-of-the-art for comprehensive genome engineering approaches. In the current work, we describe the adaptation of the CRISPR-Cas9 vector pJOE8999 to enable efficient genome editing in B. megaterium. Crucial modifications comprise the exchange of promoter elements and associated ribosomal binding sites as well as the implementation of a 5-fluorouracil based counterselection system to facilitate proper plasmid curing. In addition, the functionality and performance of the new CRISPR-Cas9 vector pMOE was successfully evaluated by chromosomal disruption studies of the endogenous β-galactosidase gene (BMD_2126) and demonstrated an outstanding efficiency of 100 % based on combinatorial pheno- and genotype analyses. Furthermore, pMOE was applied for the genomic deletion of a steroid esterase gene (BMD_2256) that was identified among several other candidates as the gene encoding the esterase, which prevented accumulation of pharmaceutically important glucocorticoid esters. Recombinant expression of the bacterial chloramphenicol acetyltransferase 1 gene (cat1) in the resulting esterase deficient B. megaterium strain ultimately yielded C21-acetylated as well as novel C21-esterified derivates of cortisone.

Exploring the synthetic biology potential of bacteriophages for engineering non-model bacteria

Non-model bacteria like Pseudomonas putida, Lactococcus lactis and other species have unique and versatile metabolisms, offering unique opportunities for Synthetic Biology (SynBio). However, key genome editing and recombineering tools require optimization and large-scale multiplexing to unlock the full SynBio potential of these bacteria. In addition, the limited availability of a set of characterized, species-specific biological parts hampers the construction of reliable genetic circuitry. Mining of currently available, diverse bacteriophages could complete the SynBio toolbox, as they constitute an unexplored treasure trove for fully adapted metabolic modulators and orthogonally-functioning parts, driven by the longstanding co-evolution between phage and host.

Industrial biotechnology of Pseudomonas putida: advances and prospects

Pseudomonas putida is a Gram-negative, rod-shaped bacterium that can be encountered in diverse ecological habitats. This ubiquity is traced to its remarkably versatile metabolism, adapted to withstand physicochemical stress, and the capacity to thrive in harsh environments. Owing to these characteristics, there is a growing interest in this microbe for industrial use, and the corresponding research has made rapid progress in recent years. Hereby, strong drivers are the exploitation of cheap renewable feedstocks and waste streams to produce value-added chemicals and the steady progress in genetic strain engineering and systems biology understanding of this bacterium. Here, we summarize the recent advances and prospects in genetic engineering, systems and synthetic biology, and applications of P. putida as a cell factory. KEY POINTS: • Pseudomonas putida advances to a global industrial cell factory. • Novel tools enable system-wide understanding and streamlined genomic engineering. • Applications of P. putida range from bioeconomy chemicals to biosynthetic drugs.

CRISPR-Assisted Multiplex Base Editing System in Pseudomonas putida KT2440

Pseudomonas putida (P. putida) KT2440 is a paradigmatic environmental-bacterium that possesses significant potential in synthetic biology, metabolic engineering and biodegradation applications. However, most genome editing methods of P. putida KT2440 depend on heterologous repair proteins and the provision of donor DNA templates, which is laborious and inefficient. In this report, an efficient cytosine base editing system was established by using cytidine deaminase (APOBEC1), enhanced specificity Cas9 nickase (eSpCas9pp^D10A) and the uracil DNA glycosylase inhibitor (UGI). This constructed base editor converts C-G into T-A in the absence of DNA strands breaks and donor DNA templates. By introducing a premature stop codon in target spacers, we successfully applied this system for gene inactivation with an efficiency of 25–100% in various Pseudomonas species, including P. putida KT2440, P. aeruginosa PAO1, P. fluorescens Pf-5 and P. entomophila L48. We engineered an eSpCas9pp^D10A-NG variant with a NG protospacer adjacent motif to expand base editing candidate sites. By modifying the APOBEC1 domain, we successfully narrowed the editable window to increase gene inactivation efficiency in cytidine-rich spacers. Additionally, multiplex base editing in double and triple loci was achieved with mutation efficiencies of 90–100% and 25–35%, respectively. Taken together, the establishment of a fast, convenient and universal base editing system will accelerate the pace of future research undertaken with P. putida KT2440 and other Pseudomonas species.

Engineering Stable Pseudomonas putida S12 by CRISPR for 2,5-Furandicarboxylic Acid (FDCA) Production

FDCA (2,5-furandicarboxylic acid) can be enzymatically converted from HMF (5-hydroxymethylfurfural). Pseudomonas putida S12 is promising for FDCA production, but generating stable P. putida S12 is difficult due to its polyploidy and lack of genome engineering tools. Here we showed that coupling CRISPR and λ-Red recombineering enabled one-step gene integration with high efficiency and frequency, and simultaneously replaced endogenous genes in all chromosomes. Using this approach, we generated two stable P. putida S12 strains expressing HMF/furfural oxidoreductase (HMFH) and HMF oxidase (HMFO), both being able to convert 50 mM HMF to ≈42-43 mM FDCA in 24 h. Cosupplementation of MnO₂ and CaCO₃ to the medium drastically improved the cell tolerance to HMF and enhanced FDCA production. Cointegrating HMFH and HMFT1 (HMF transporter) genes further improved FDCA production, enabling the cells to convert 250 mM HMF to 196 mM (30.6 g/L) FDCA in 24 h. This study implicates the potentials of CRISPR for generating stable P. putida S12 strains for FDCA production.

The Cellular Response to Lanthanum Is Substrate Specific and Reveals a Novel Route for Glycerol Metabolism in Pseudomonas putida KT2440

Ever since the discovery of the first rare earth element (REE)-dependent enzyme, the physiological role of lanthanides has become an emerging field of research due to the environmental implications and biotechnological opportunities. In Pseudomonas putida KT2440, the two pyrroloquinoline quinone-dependent alcohol dehydrogenases (PQQ-ADHs) PedE and PedH are inversely regulated in response to REE availability. This transcriptional switch is orchestrated by a complex regulatory network that includes the PedR2/PedS2 two-component system and is important for efficient growth on several alcoholic volatiles. To study whether cellular responses beyond the REE switch exist, the differential proteomic responses that occur during growth on various model carbon sources were analyzed. Apart from the Ca2+-dependent enzyme PedE, the differential abundances of most identified proteins were conditional. During growth on glycerol-and concomitant with the proteomic changes-lanthanum (La3+) availability affected different growth parameters, including the onset of logarithmic growth and final optical densities. Studies with mutant strains revealed a novel metabolic route for glycerol utilization, initiated by PedE and/or PedH activity. Upon oxidation to glycerate via glyceraldehyde, phosphorylation by the glycerate kinase GarK most likely yields glycerate-2-phosphate, which is eventually channeled into the central metabolism of the cell. This new route functions in parallel with the main degradation pathway encoded by the glpFKRD operon and provides a growth advantage to the cells by allowing an earlier onset of growth with glycerol as the sole source of carbon and energy.IMPORTANCE The biological role of REEs has long been underestimated, and research has mainly focused on methanotrophic and methylotrophic bacteria. We have recently demonstrated that P. putida, a plant growth-promoting bacterium that thrives in the rhizosphere of various food crops, possesses a REE-dependent alcohol dehydrogenase (PedH), but knowledge about REE-specific effects on physiological traits in nonmethylotrophic bacteria is still scarce. This study demonstrates that the cellular response of P. putida to lanthanum (La3+) is mostly substrate specific and that La3+ availability highly affects the growth of cells on glycerol. Further, a novel route for glycerol metabolism is identified, which is initiated by PedE and/or PedH activity and provides a growth advantage to this biotechnologically relevant organism by allowing a faster onset of growth. Overall, these findings demonstrate that lanthanides can affect physiological traits in nonmethylotrophic bacteria and might influence their competitiveness in various environmental niches.

Engineering Pseudomonas putida KT2440 for the production of isobutanol

We engineered P. putida for the production of isobutanol from glucose by preventing product and precursor degradation, inactivation of the soluble transhydrogenase SthA, overexpression of the native ilvC and ilvD genes, and implementation of the feedback-resistant acetolactate synthase AlsS from Bacillus subtilis, ketoacid decarboxylase KivD from Lactococcus lactis, and aldehyde dehydrogenase YqhD from Escherichia coli. The resulting strain P. putida Iso2 produced isobutanol with a substrate specific product yield (Y Iso/S) of 22 ± 2 mg per gram of glucose under aerobic conditions. Furthermore, we identified the ketoacid decarboxylase from Carnobacterium maltaromaticum to be a suitable alternative for isobutanol production, since replacement of kivD from L. lactis in P. putida Iso2 by the variant from C. maltaromaticum yielded an identical YIso/S. Although P. putida is regarded as obligate aerobic, we show that under oxygen deprivation conditions this bacterium does not grow, remains metabolically active, and that engineered producer strains secreted isobutanol also under the non-growing conditions.

Deletion of genomic islands in the Pseudomonas putida KT2440 genome can create an optimal chassis for synthetic biology applications

Background

Genome streamlining is a feasible strategy for constructing an optimum microbial chassis for synthetic biology applications. Genomic islands (GIs) are usually regarded as foreign DNA sequences, which can be obtained by horizontal gene transfer among microorganisms. A model strain Pseudomonas putida KT2440 has broad applications in biocatalysis, biotransformation and biodegradation.

Results

In this study, the identified GIs in P. putida KT2440 accounting for 4.12% of the total genome size were deleted to generate a series of genome-reduced strains. The mutant KTU-U13 with the largest deletion was advantageous over the original strain KTU in several physiological characteristics evaluated. The mutant KTU-U13 showed high plasmid transformation efficiency and heterologous protein expression capacity compared with the original strain KTU. The metabolic phenotype analysis showed that the types of carbon sources utilized by the mutant KTU-U13 and the utilization capabilities for certain carbon sources were increased greatly. The polyhydroxyalkanoate (PHA) yield and cell dry weight of the mutant KTU-U13 were improved significantly compared with the original strain KTU. The chromosomal integration efficiencies for the γ-hexachlorocyclohexane (γ-HCH) and 1,2,3-trichloropropane (TCP) biodegradation pathways were improved greatly when using the mutant KTU-U13 as the recipient cell and enhanced degradation of γ-HCH and TCP by the mutant KTU-U13 was also observed. The mutant KTU-U13 was able to stably express a plasmid-borne zeaxanthin biosynthetic pathway, suggesting the excellent genetic stability of the mutant.

Conclusions

These desirable traits make the GIs-deleted mutant KTU-U13 an optimum chassis for synthetic biology applications. The present study suggests that the systematic deletion of GIs in bacteria may be a useful approach for generating an optimal chassis for the construction of microbial cell factories.

Development of a CRISPR/Cas9n-based tool for metabolic engineering of Pseudomonas putida for ferulic acid-to-polyhydroxyalkanoate bioconversion

Ferulic acid is a ubiquitous phenolic compound in lignocellulose, which is recognized for its role in the microbial carbon catabolism and industrial value. However, its recalcitrance and toxicity poses a challenge for ferulic acid-to-bioproducts bioconversion. Here, we develop a genome editing strategy for Pseudomonas putida KT2440 using an integrated CRISPR/Cas9n-λ-Red system with pyrF as a selection marker, which maintains cell viability and genetic stability, increases mutation efficiency, and simplifies genetic manipulation. Via this method, four functional modules, comprised of nine genes involved in ferulic acid catabolism and polyhydroxyalkanoate biosynthesis, were integrated into the genome, generating the KTc9n20 strain. After metabolic engineering and optimization of C/N ratio, polyhydroxyalkanoate production was increased to ~270 mg/L, coupled with ~20 mM ferulic acid consumption. This study not only establishes a simple and efficient genome editing strategy, but also offers an encouraging example of how to apply this method to improve microbial aromatic compound bioconversion.

Yueyue Zhou et al. develop a genetic engineering method that increases the production of polyhydroxyalkanoate from ferulic acid, which is toxic at high concentrations. This study provides insight into the bioconversion of the aromatic compound in Pseudomonas.

Accelerated genome engineering of Pseudomonas putida by I-SceI-mediated recombination and CRISPR-Cas9 counterselection

Pseudomonas species have become reliable platforms for bioproduction due to their capability to tolerate harsh conditions imposed by large-scale bioprocesses and their remarkable resistance to diverse physicochemical stresses. The last few years have brought forth a variety of synthetic biology tools for the genetic manipulation of pseudomonads, but most of them are either applicable only to obtain certain types of mutations, lack efficiency, or are not easily accessible to be used in different Pseudomonas species (e.g. natural isolates). In this work, we describe a versatile, robust and user-friendly procedure that facilitates virtually any kind of genomic manipulation in Pseudomonas species in 3-5 days. The protocol presented here is based on DNA recombination forced by double-stranded DNA cuts (through the activity of the I-SceI homing meganuclease from yeast) followed by highly efficient counterselection of mutants (aided by a synthetic CRISPR-Cas9 device). The individual parts of the genome engineering toolbox, tailored for knocking genes in and out, have been standardized to enable portability and easy exchange of functional gene modules as needed. The applicability of the procedure is illustrated both by eliminating selected genomic regions in the platform strain P. putida KT2440 (including difficult-to-delete genes) and by integrating different reporter genes (comprising novel variants of fluorescent proteins) into a defined landing site in the target chromosome.

Biotransformation of corn bran derived ferulic acid to vanillic acid using engineered Pseudomonas putida KT2440

Ferulic acid is a fraction of the phenolics present in cereals such as rice and corn as a component of the bran. Substantial amounts of waste bran are generated by the grain processing industry and this can be valorized via extraction, purification and conversion of phenolics to value added chemical products. Alkaline alcohol based extracted and purified ferulic acid from corn bran was converted to vanillic acid using engineered Pseudomonas putida KT2440. The strain was engineered by rendering the vanAB gene nonfunctional and obtaining the mutant defective in vanillic acid metabolism. Biotransformation of ferulic acid using resting Pseudomonas putida KT2440 mutant cells resulted in more than 95 ± 1.4% molar yield from standard ferulic acid; while the corn bran derived ferulic acid gave 87 ± 0.38% molar yield. With fermentation time of less than 24 h the mutant becomes a promising candidate for the stable biosynthesis of vanillic acid at industrial scale.

Rare Earth Element (REE)-Dependent Growth of Pseudomonas putida KT2440 Relies on the ABC-Transporter PedA1A2BC and Is Influenced by Iron Availability

In the soil-dwelling organism Pseudomonas putida KT2440, the rare earth element (REE)-utilizing, and pyrroloquinoline quinone (PQQ)-dependent ethanol dehydrogenase PedH is part of a periplasmic oxidation system that is vital for growth on various alcoholic volatiles. Production of PedH and its Ca2+-dependent counterpart PedE is inversely regulated in response to lanthanide (Ln3+) bioavailability, a mechanism termed the REE-switch. In the present study, we demonstrate that copper, zinc, and in particular, iron availability influences this regulation in a pyoverdine-independent manner by increasing the minimal Ln3+ concentration required for the REE-switch to occur by several orders of magnitude. A combined genetic and physiological approach reveals that an ABC-type transporter system encoded by the gene cluster pedA1A2BC is essential for efficient growth on 2-phenylethanol with low (nanomolar) Ln3+ concentrations. In the absence of pedA1A2BC, a ∼100-fold higher La3+-concentration is needed for PedH-dependent growth but not for the ability to repress growth based on PedE activity. From these results, we conclude that cytoplasmic uptake of lanthanides through PedA1A2BC is essential to facilitate REE-dependent growth on 2-phenylethanol under environmental conditions with poor REE bioavailability. Our data further suggest that the La3+/Fe2+/3+ ratio impacts the REE-switch through the mismetallation of putative La3+-binding proteins, such as the sensor histidine kinase PedS2, in the presence of high iron concentrations. As such, this study provides an example for the complexity of bacteria-metal interactions and highlights the importance of medium compositions when studying physiological traits in vitro in particular in regard to REE-dependent phenomena.

Analysis and characterization of coenzyme B12 biosynthetic gene clusters and improvement of B12 biosynthesis in Pseudomonas denitrificans ATCC 13867

Coenzyme B12 is an essential cofactor for many enzymes such as glycerol dehydratase, methionine synthase and methylmalonyl-CoA mutase. Herein, we revisited the B12 biosynthetic gene clusters (I and II) in Pseudomonas denitrificans, a well-known industrial producer of the coenzyme B12, to understand the regulation of gene expression and improve the production of coenzyme B12. There were eight operons, seven in cluster I and one in cluster II, and four operons were regulated by B12-responsive riboswitches with a switch-off concentration at ∼5 nM coenzyme B12. DNA sequences of the four riboswitches were partially removed, individually or in combination, to destroy the structures of riboswitches, but no improvement was observed. However, when the whole length of riboswitches in cluster I were completely removed and promoters regulated by the riboswitches were replaced with strong constitutive ones, B12 biosynthesis was improved by up to 2-fold. Interestingly, modification of the promoter region for cluster II, where many (>10) late genes of B12 biosynthesis belong, always resulted in a significant, greater than 6-fold reduction in B12 biosynthesis.

Deletion of DNA ligase IV homolog confers higher gene targeting efficiency on homologous recombination in Komagataella phaffii

The non-conventional yeast Komagataella phaffii, formerly Pichia pastoris, is a popular host for recombinant protein production. The relatively lower gene targeting efficiency observed in this species occurs due to high levels of non-homologous recombination activity. In the current study, we explored the function of the K. phaffii homolog of DNA ligase IV (Dnl4p) by creating a DNL4-disrupted strain. To assess the roles of non-homologous end joining (NHEJ)-related proteins in this species, strains deleted for either or both genes encoding Dnl4p or the telomeric Ku complex subunit (Ku70p) were generated. These deletions were constructed by either of two distinct marker-recycling methods (yielding either a seamless gene deletion or a Cre-loxP-mediated gene deletion). The resulting dnl4- and/or ku70-deleted K. phaffii strains were used to evaluate gene targeting efficiency in gene knock-out and gene knock-in experiments. The Dnl4p-defective strain showed improved gene targeting efficiency for homologous recombination compared to the wild-type and Ku70p-deffective strains. The dnl4 ku70 double knock-out strain exhibited a further improvement in gene targeting efficiency. Thus, the K. phaffii dnl4 and dnl4 ku70 deletion strains are expected to serve as useful platforms for functional analysis and strain development in this species.

Leveraging synthetic biology for producing bioactive polyketides and non-ribosomal peptides in bacterial heterologous hosts

Bacteria have historically been a rich source of natural products (e.g. polyketides and non-ribosomal peptides) that possess medically-relevant activities. Despite extensive discovery programs in both industry and academia, a plethora of biosynthetic pathways remain uncharacterized and the corresponding molecular products untested for potential bioactivities. This knowledge gap comes in part from the fact that many putative natural product producers have not been cultured in conventional laboratory settings in which the corresponding products are produced at detectable levels. Next-generation sequencing technologies are further increasing the knowledge gap by obtaining metagenomic sequence information from complex communities where production of the desired compound cannot be isolated in the laboratory. For these reasons, many groups are turning to synthetic biology to produce putative natural products in heterologous hosts. This strategy depends on the ability to heterologously express putative biosynthetic gene clusters and produce relevant quantities of the corresponding products. Actinobacteria remain the most abundant source of natural products and the most promising heterologous hosts for natural product discovery and production. However, researchers are discovering more natural products from other groups of bacteria, such as myxobacteria and cyanobacteria. Therefore, phylogenetically similar heterologous hosts have become promising candidates for synthesizing these novel molecules. The downside of working with these microbes is the lack of well-characterized genetic tools for optimizing expression of gene clusters and product titers. This review examines heterologous expression of natural product gene clusters in terms of the motivations for this research, the traits desired in an ideal host, tools available to the field, and a survey of recent progress.

Protocols for RecET-based markerless gene knockout and integration to express heterologous biosynthetic gene clusters in Pseudomonas putida

Pseudomonas putida has emerged as a promising host for the production of chemicals and materials thanks to its metabolic versatility and cellular robustness. In particular, P. putida KT2440 has been officially classified as a generally recognized as safe (GRAS) strain, which makes it suitable for the production of compounds that humans directly consume, including secondary metabolites of high importance. Although various tools and strategies have been developed to facilitate metabolic engineering of P. putida, modification of large genes/clusters essential for heterologous expression of natural products with large biosynthetic gene clusters (BGCs) has not been straightforward. Recently, we reported a RecET-based markerless recombineering system for engineering P. putida and demonstrated deletion of multiple regions as large as 101.7 kb throughout the chromosome by single rounds of recombineering. In addition, development of a donor plasmid system allowed successful markerless integration of heterologous BGCs to P. putida chromosome using the recombineering system with examples of - but not limited to - integrating multiple heterologous BGCs as large as 7.4 kb to the chromosome of P. putida KT2440. In response to the increasing interest in our markerless recombineering system, here we provide detailed protocols for markerless gene knockout and integration for the genome engineering of P. putida and related species of high industrial importance.

Fermentative Production of N-Methylglutamate From Glycerol by Recombinant Pseudomonas putida

N-methylated amino acids are present in diverse biological molecules in bacteria, archaea and eukaryotes. There is an increasing interest in this molecular class of alkylated amino acids by the pharmaceutical and chemical industries. N-alkylated amino acids have desired functions such as higher proteolytic stability, enhanced membrane permeability and longer peptide half-lives, which are important for the peptide-based drugs, the so-called peptidomimetics. Chemical synthesis of N-methylated amino acids often is limited by incomplete stereoselectivity, over-alkylation or the use of hazardous chemicals. Here, we describe metabolic engineering of Pseudomonas putida KT2440 for the fermentative production of N-methylglutamate from simple carbon sources and monomethylamine. P. putida KT2440, which is generally recognized as safe and grows with glucose and the alternative feedstock glycerol as sole carbon and energy source, was engineered for the production of N-methylglutamate using heterologous enzymes from Methylobacterium extorquens. About 3.9 g L⁻¹N-methylglutamate accumulated within 48 h in shake flask cultures with minimal medium containing monomethylamine and glycerol. A fed-batch cultivation process yielded a N-methylglutamate titer of 17.9 g L⁻¹.

Genome Editing Method for the Anaerobic Magnetotactic Bacterium Desulfovibrio magneticus RS-1

Magnetotactic bacteria (MTB) are a group of organisms that form intracellular nanometer-scale magnetic crystals though a complex process involving lipid and protein scaffolds. These magnetic crystals and their lipid membranes, termed magnetosomes, are model systems for studying bacterial cell biology and biomineralization and are potential platforms for biotechnological applications. Due to a lack of genetic tools and unculturable representatives, the mechanisms of magnetosome formation in phylogenetically deeply branching MTB remain unknown. These MTB contain elongated bullet-/tooth-shaped magnetite and greigite crystals that likely form in a manner distinct from that of the cubooctahedral-shaped magnetite crystals of the genetically tractable MTB within the Alphaproteobacteria. Here, we present a method for genome editing in Desulfovibrio magneticus RS-1, a cultured representative of the deeply branching MTB of the class Deltaproteobacteria. This marks a crucial step in developing D. magneticus as a model for studying diverse mechanisms of magnetic particle formation by MTB.

Magnetosomes are complex bacterial organelles that serve as model systems for studying bacterial cell biology, biomineralization, and global iron cycling. Magnetosome biogenesis is primarily studied in two closely related Alphaproteobacteria of the genus Magnetospirillum that form cubooctahedral-shaped magnetite crystals within a lipid membrane. However, chemically and structurally distinct magnetic particles have been found in physiologically and phylogenetically diverse bacteria. Due to a lack of molecular genetic tools, the mechanistic diversity of magnetosome formation remains poorly understood. Desulfovibrio magneticus RS-1 is an anaerobic sulfate-reducing deltaproteobacterium that forms bullet-shaped magnetite crystals. A recent forward genetic screen identified 10 genes in the conserved magnetosome gene island of D. magneticus that are essential for its magnetic phenotype. However, this screen likely missed mutants with defects in crystal size, shape, and arrangement. Reverse genetics to target the remaining putative magnetosome genes using standard genetic methods of suicide vector integration have not been feasible due to the low transconjugation efficiency. Here, we present a reverse genetic method for targeted mutagenesis in D. magneticus using a replicative plasmid. To test this method, we generated a mutant resistant to 5-fluorouracil by making a markerless deletion of the upp gene that encodes uracil phosphoribosyltransferase. We also used this method for targeted marker exchange mutagenesis by replacing kupM, a gene identified in our previous screen as a magnetosome formation factor, with a streptomycin resistance cassette. Overall, our results show that targeted mutagenesis using a replicative plasmid is effective in D. magneticus and may also be applied to other genetically recalcitrant bacteria.

IMPORTANCE Magnetotactic bacteria (MTB) are a group of organisms that form intracellular nanometer-scale magnetic crystals though a complex process involving lipid and protein scaffolds. These magnetic crystals and their lipid membranes, termed magnetosomes, are model systems for studying bacterial cell biology and biomineralization and are potential platforms for biotechnological applications. Due to a lack of genetic tools and unculturable representatives, the mechanisms of magnetosome formation in phylogenetically deeply branching MTB remain unknown. These MTB contain elongated bullet-/tooth-shaped magnetite and greigite crystals that likely form in a manner distinct from that of the cubooctahedral-shaped magnetite crystals of the genetically tractable MTB within the Alphaproteobacteria. Here, we present a method for genome editing in Desulfovibrio magneticus RS-1, a cultured representative of the deeply branching MTB of the class Deltaproteobacteria. This marks a crucial step in developing D. magneticus as a model for studying diverse mechanisms of magnetic particle formation by MTB.

Removal enactment of organo-phosphorous pesticide using bacteria isolated from domestic sewage

Three bacteria (MS I, II and III) i.e., Pseudomonas aeruginosa (KY781886), Enterobactor ludwigii (KX881423) and Enterobacter cloacae (KX881513) isolated from domestic sewage were identified on the basis of 16S rDNA sequencing and are capable to growth in the presence of organo-phosphorous pesticide (chlorpyrifos). The mega plasmid size >23 kb was found in MS I and III. Biosurfactants of the significant amount were produced by three isolates. The ability of the isolates to degrade pesticide over 3 days in the presence of pesticides containing chlorpyrifos as the active component was estimated. Results of UV-visible, FTIR spectroscopy and GC-MS studies confirmed the removal of chlorpyrifos rather than degradation. Pesticide uptake results showed chlorpyrifos in intracellular components and bound to the cell surface in its native state. Removal of pesticide from soil was also recorded by these bacteria. Microbial treated pesticide did not have any effect on Vigna radita seedlings and goat erythrocytes.

The PedS2/PedR2 Two-Component System Is Crucial for the Rare Earth Element Switch in Pseudomonas putida KT2440

The function of lanthanides for methanotrophic and methylotrophic bacteria is gaining increasing attention, while knowledge about the role of rare earth elements (REEs) in nonmethylotrophic bacteria is still limited. The present study investigates the recently described differential expression of the two PQQ-EDHs of P. putida in response to lanthanides. We demonstrate that a specific TCS is crucial for their inverse regulation and provide evidence for a dual regulatory function of the LuxR-type response regulator involved. Thus, our study represents the first detailed characterization of the molecular mechanism underlying the REE switch of PQQ-EDHs in a nonmethylotrophic bacterium and stimulates subsequent investigations for the identification of additional genes or phenotypic traits that might be coregulated during REE-dependent niche adaptation.

In Pseudomonas putida KT2440, two pyrroloquinoline quinone-dependent ethanol dehydrogenases (PQQ-EDHs) are responsible for the periplasmic oxidation of a broad variety of volatile organic compounds (VOCs). Depending on the availability of rare earth elements (REEs) of the lanthanide series (Ln³⁺), we have recently reported that the transcription of the genes encoding the Ca²⁺-utilizing enzyme PedE and the Ln³⁺-utilizing enzyme PedH are inversely regulated. With adaptive evolution experiments, site-specific mutations, transcriptional reporter fusions, and complementation approaches, we now demonstrate that the PedS2/PedR2 (PP_2671/PP_2672) two-component system (TCS) plays a central role in the observed REE-mediated switch of PQQ-EDHs in P. putida. We provide evidence that in the absence of lanthanum (La³⁺), the sensor histidine kinase PedS2 phosphorylates its cognate LuxR-type response regulator PedR2, which in turn not only activates pedE gene transcription but is also involved in repression of pedH. Our data further suggest that the presence of La³⁺ lowers kinase activity of PedS2, either by the direct binding of the metal ions to the periplasmic region of PedS2 or by an uncharacterized indirect interaction, leading to reduced levels of phosphorylated PedR2. Consequently, the decreasing pedE expression and concomitant alleviation of pedH repression causes—in conjunction with the transcriptional activation of the pedH gene by a yet unknown regulatory module—the Ln³⁺-dependent transition from PedE- to PedH-catalyzed oxidation of alcoholic VOCs.

IMPORTANCE The function of lanthanides for methanotrophic and methylotrophic bacteria is gaining increasing attention, while knowledge about the role of rare earth elements (REEs) in nonmethylotrophic bacteria is still limited. The present study investigates the recently described differential expression of the two PQQ-EDHs of P. putida in response to lanthanides. We demonstrate that a specific TCS is crucial for their inverse regulation and provide evidence for a dual regulatory function of the LuxR-type response regulator involved. Thus, our study represents the first detailed characterization of the molecular mechanism underlying the REE switch of PQQ-EDHs in a nonmethylotrophic bacterium and stimulates subsequent investigations for the identification of additional genes or phenotypic traits that might be coregulated during REE-dependent niche adaptation.

An engineered Pseudomonas putida can simultaneously degrade organophosphates, pyrethroids and carbamates

Agricultural soils are often polluted with a variety of pesticides. Unfortunately, natural microorganisms lack the capacity to simultaneously degrade different types of pesticides. Currently, synthetic biology provides powerful approaches to create versatile degraders. In this work, a biosafety strain Pseudomonas putida KT2440 was engineered for simultaneous degradation of organophosphates, pyrethroids, and carbamates, enhanced oxygen-sequestering capability, and real-time monitoring by targeted insertion of four pesticide-degrading genes, vgb, and gfp into the chromosome using a scarless genome-editing method. The resulting recombinant strain, designated as P. putida KTUe, could completely degrade 50mg/L methyl parathion, chlorpyrifos, fenpropathrin, cypermethrin, carbofuran and carbaryl within 30h when incubated in M9 minimal medium supplemented with 20g/L glucose. In soil remediation studies, all the tested six pesticides (50mg/kg soil each) were completely removed in soils inoculated with P. putida KTUe within 15days. Moreover, Vitreoscilla hemoglobin (VHb)-expressing P. putida KTUe grew faster than P. putida KTUd without VHb expression under oxygen-limited conditions, suggesting that VHb may enhance the capability of this recombinant strain to sequester oxygen. Furthermore, the green fluorescence was observed on the P. putida KTUe cells, suggesting that this green fluorescent protein (GFP)-marked strain may be tracked by fluorescence during bioremediation. Therefore, this recombinant strain may serve as a promising candidate for in situ bioremediation of soil contaminated with multiple pesticides. This work not only underscores the value of P. putida KT2440 as an ideal host for bioremediation but also highlights the power of synthetic biology for expanding the degradation capability of natural degraders.

Building a genome engineering toolbox in nonmodel prokaryotic microbes

The realization of a sustainable bioeconomy requires our ability to understand and engineer complex design principles for the development of platform organisms capable of efficient conversion of cheap and sustainable feedstocks (e.g., sunlight, CO₂ , and nonfood biomass) into biofuels and bioproducts at sufficient titers and costs. For model microbes, such as Escherichia coli, advances in DNA reading and writing technologies are driving the adoption of new paradigms for engineering biological systems. Unfortunately, microbes with properties of interest for the utilization of cheap and renewable feedstocks, such as photosynthesis, autotrophic growth, and cellulose degradation, have very few, if any, genetic tools for metabolic engineering. Therefore, it is important to develop "design rules" for building a genetic toolbox for novel microbes. Here, we present an overview of our current understanding of these rules for the genetic manipulation of prokaryotic microbes and the available genetic tools to expand our ability to genetically engineer nonmodel systems.

Markerless gene knockout and integration to express heterologous biosynthetic gene clusters in Pseudomonas putida

Pseudomonas putida has gained much interest among metabolic engineers as a workhorse for producing valuable natural products. While a few gene knockout tools for P. putida have been reported, integration of heterologous genes into the chromosome of P. putida, an essential strategy to develop stable industrial strains producing heterologous bioproducts, requires development of a more efficient method. Current methods rely on time-consuming homologous recombination techniques and transposon-mediated random insertions. Here we report a RecET recombineering system for markerless integration of heterologous genes into the P. putida chromosome. The efficiency and capacity of the recombineering system were first demonstrated by knocking out various genetic loci on the P. putida chromosome with knockout lengths widely spanning 0.6-101.7 kb. The RecET recombineering system developed here allowed successful integration of biosynthetic gene clusters for four proof-of-concept bioproducts, including protein, polyketide, isoprenoid, and amino acid derivative, into the target genetic locus of P. putida chromosome. The markerless recombineering system was completed by combining Cre/lox system and developing efficient plasmid curing systems, generating final strains free of antibiotic markers and plasmids. This markerless recombineering system for efficient gene knockout and integration will expedite metabolic engineering of P. putida, a bacterial host strain of increasing academic and industrial interest.

Genome editing and transcriptional repression in Pseudomonas putida KT2440 via the type II CRISPR system

Background

The soil bacterium Pseudomonas putida KT2440 is a “generally recognized as safe”-certified strain with robust property and versatile metabolism. Thus, it is an ideal candidate for synthetic biology, biodegradation, and other biotechnology applications. The known genome editing approaches of Pseudomonas are suboptimal; thus, it is necessary to develop a high efficiency genome editing tool.

Results

In this study, we established a fast and convenient CRISPR–Cas9 method in P. putida KT2440. Gene deletion, gene insertion and gene replacement could be achieved within 5 days, and the mutation efficiency reached > 70%. Single nucleotide replacement could be realized, overcoming the limitations of protospacer adjacent motif sequences. We also applied nuclease-deficient Cas9 binding at three locations upstream of enhanced green fluorescent protein (eGFP) for transcriptional inhibition, and the expression intensity of eGFP reduced to 28.5, 29.4, and 72.1% of the control level, respectively. Furthermore, based on this CRISPR–Cas9 system, we also constructed a CRISPR–Cpf1 system, which we validated for genome editing in P. putida KT2440.

Conclusions

In this research, we established CRISPR based genome editing and regulation control systems in P. putida KT2440. These fast and efficient approaches will greatly facilitate the application of P. putida KT2440.

Electronic supplementary material

The online version of this article (10.1186/s12934-018-0887-x) contains supplementary material, which is available to authorized users.

Genetic tools for reliable gene expression and recombineering in Pseudomonas putida

Pseudomonas putida is a promising bacterial host for producing natural products, such as polyketides and nonribosomal peptides. In these types of projects, researchers need a genetic toolbox consisting of plasmids, characterized promoters, and techniques for rapidly editing the genome. Past reports described constitutive promoter libraries, a suite of broad host range plasmids that replicate in P. putida, and genome-editing methods. To augment those tools, we have characterized a set of inducible promoters and discovered that IPTG-inducible promoter systems have poor dynamic range due to overexpression of the LacI repressor. By replacing the promoter driving lacI expression with weaker promoters, we increased the fold induction of an IPTG-inducible promoter in P. putida KT2440 to 80-fold. Upon discovering that gene expression from a plasmid was unpredictable when using a high-copy mutant of the BBR1 origin, we determined the copy numbers of several broad host range origins and found that plasmid copy numbers are significantly higher in P. putida KT2440 than in the synthetic biology workhorse, Escherichia coli. Lastly, we developed a λRed/Cas9 recombineering method in P. putida KT2440 using the genetic tools that we characterized. This method enabled the creation of scarless mutations without the need for performing classic two-step integration and marker removal protocols that depend on selection and counterselection genes. With the method, we generated four scarless deletions, three of which we were unable to create using a previously established genome-editing technique.

A metabolic pathway for catabolizing levulinic acid in bacteria

Microorganisms can catabolize a wide range of organic compounds and therefore have the potential to perform many industrially relevant bioconversions. One barrier to realizing the potential of biorefining strategies lies in our incomplete knowledge of metabolic pathways, including those that can be used to assimilate naturally abundant or easily generated feedstocks. For instance, levulinic acid (LA) is a carbon source that is readily obtainable as a dehydration product of lignocellulosic biomass and can serve as the sole carbon source for some bacteria. Yet, the genetics and structure of LA catabolism have remained unknown. Here, we report the identification and characterization of a seven-gene operon that enables LA catabolism in Pseudomonas putida KT2440. When the pathway was reconstituted with purified proteins, we observed the formation of four acyl-CoA intermediates, including a unique 4-phosphovaleryl-CoA and the previously observed 3-hydroxyvaleryl-CoA product. Using adaptive evolution, we obtained a mutant of Escherichia coli LS5218 with functional deletions of fadE and atoC that was capable of robust growth on LA when it expressed the five enzymes from the P. putida operon. This discovery will enable more efficient use of biomass hydrolysates and metabolic engineering to develop bioconversions using LA as a feedstock.

Combinatorial metabolic engineering of Pseudomonas putida KT2440 for efficient mineralization of 1,2,3-trichloropropane

An industrial waste, 1,2,3-trichloropropane (TCP), is toxic and extremely recalcitrant to biodegradation. To date, no natural TCP degraders able to mineralize TCP aerobically have been isolated. In this work, we engineered a biosafety Pseudomonas putida strain KT2440 for aerobic mineralization of TCP by implantation of a synthetic biodegradation pathway into the chromosome and further improved TCP mineralization using combinatorial engineering strategies. Initially, a synthetic pathway composed of haloalkane dehalogenase, haloalcohol dehalogenase and epoxide hydrolase was functionally assembled for the conversion of TCP into glycerol in P. putida KT2440. Then, the growth lag-phase of using glycerol as a growth precursor was eliminated by deleting the glpR gene, significantly enhancing the flux of carbon through the pathway. Subsequently, we improved the oxygen sequestering capacity of this strain through the heterologous expression of Vitreoscilla hemoglobin, which makes this strain able to mineralize TCP under oxygen-limited conditions. Lastly, we further improved intracellular energy charge (ATP/ADP ratio) and reducing power (NADPH/NADP⁺ ratio) by deleting flagella-related genes in the genome of P. putida KT2440. The resulting strain (named KTU-TGVF) could efficiently utilize TCP as the sole source of carbon for growth. Degradation studies in a bioreactor highlight the value of this engineered strain for TCP bioremediation.