Molecular cloning of an endoglucanase gene from an alkalophilic Bacillus sp. and its expression in Escherichia coli

Crystal structure of hyperthermophilic endo-β-1,4-glucanase: implications for catalytic mechanism and thermostability

Endo-β-1,4-glucanase from thermophilic Fervidobacterium nodosum Rt17-B1 (FnCel5A), a new member of glycosyl hydrolase family 5, is highly thermostable and exhibits the highest activity on carboxymethylcellulose among the reported homologues. To understand the structural basis for the thermostability and catalytic mechanism, we report here the crystal structures of FnCel5A and the complex with glucose at atomic resolution. FnCel5A exhibited a (β/α)(8)-barrel structure typical of clan GH-A of the glycoside hydrolase families with a large and deep catalytic pocket located in the C-terminal end of the β-strands that may permit substrate access. A comparison of the structure of FnCel5A with related structures from thermopile Clostridium thermocellum, mesophile Clostridium cellulolyticum, and psychrophile Pseudoalteromonas haloplanktis showed significant differences in intramolecular interactions (salt bridges and hydrogen bonds) that may account for the difference in their thermostabilities. The substrate complex structure in combination with a mutagenesis analysis of the catalytic residues implicates a distinctive catalytic module Glu(167)-His(226)-Glu(283), which suggests that the histidine may function as an intermediate for the electron transfer network between the typical Glu-Glu catalytic module. Further investigation suggested that the aromatic residues Trp(61), Trp(204), Phe(231), and Trp(240) as well as polar residues Asn(51), His(127), Tyr(228), and His(235) in the active site not only participated in substrate binding but also provided a unique microenvironment suitable for catalysis. These results provide substantial insight into the unique characteristics of FnCel5A for catalysis and adaptation to extreme temperature.

Influence of the N-terminal peptide on the cocrystallization of a thermophilic endo-β-1,4-glucanase with polysaccharide substrates

It is well known that protein cocrystallization is affected by several parameters such as the ratio of the protein to the ligand, the reservoir solution, the pH and the temperature. Previously, spatial blocking by the N-terminus was observed in the active site in the crystal structure of the native protein of a thermostable endoglucanase from the thermophilic bacterium Fervidobacterium nodosum Rt17-B1 (FnCel5A). It was speculated that the N-terminal α-helix might form interactions with the substrate-binding residues and it was believed that this spatial block is special to some extent. In order to confirm the effect on cocrystallization, two N-terminally truncated variants of FnCel5A were constructed, purified and cocrystallized at 291 K. A crystal of FnCel5AND_12-343 in complex with cellobiose was obtained using PEG 8000 as a precipitant. A 2.2 Å resolution data set was collected. This crystal form (space group P4(1)2(1)2, unit-cell parameters a = b = 47.3, c = 271.4 Å) differed from that of the native protein. One molecule is assumed to be present per asymmetric unit, which gives a Matthews coefficient of 2.05 Å(3) Da(-1).

Improved catalytic efficiency of endo-beta-1,4-glucanase from Bacillus subtilis BME-15 by directed evolution

Bacillus subtilis endo-beta-1,4-glucanase (Cel5A) hydrolyzes cellulose by cleavage of the internal bonds in the glucose chains, producing new ends randomly. Using directed evolution techniques of error-prone polymerase chain reaction (PCR) and DNA shuffling, several Cel5A variants with improved catalytic activity had been screened from the mutant library, which contained 71,000 colonies. Compared with the wild-type enzyme, the variants (M44-11, S75 and S78) showed 2.03 to 2.68-fold increased activities toward sodium carboxymethyl cellulose (CMC), while the M44-11 also exhibited a wider pH tolerance and higher thermostability. Structural models of M44-11, S75, S78, and WT proteins revealed that most of the substitutions were not located in the strictly conserved regions, except the mutation V255A of S75, which was closed to the nucleophile Glu257 in the catalytic center of the enzyme. Moreover, V74A and D272G of M44-11, which were not located in the substrate binding sites and the catalytic center, might result in improved stability and catalytic activity. These results provided useful references for directed evolution of the enzymes that belonged to the glycoside hydrolase family 5 (GH5).

Isolation, characterization and manipulation of cellulase genes

The complete hydrolysis of cellulose requires a number of different enzymes including endoglucanase, exoglucanase and beta-glucosidase. These enzymes function in concert as part of a 'cellulase'complex called a cellulosome. In order (i) to develop a better understanding of the biochemical nature of the cellulase complex as well as the genetic regulation of its integral components and (ii) to utilize cellulases either as purified enzymes or as part of an engineered organism for a variety of purposes, researchers have, as a first step, used recombinant DNA technology to isolate the genes for these enzymes from a variety of organisms. This review provides some perspective on the current status of the isolation, characterization and manipulation of cellulase genes and specifically discusses (i) strategies for the isolation of endoglucanase, exoglucanase and beta-glucosidase genes; (ii) DNA sequence characterization of the cellulase genes and their accompanying regulatory elements; (iii) the expression of cellulase genes in heterologous host organisms and (iv) some of the proposed uses for isolated cellulase genes.

Molecular cloning, expression, and characterization of endo-beta-1,4-glucanase genes from Bacillus polymyxa and Bacillus circulans

Endo-beta-1,4-glucanase genes from Bacillus circulans and from B. polymyxa were cloned by direct expression by using bacteriophage M13mp9 as the vector. The enzymatic activity of the gene products was detected by using either the Congo red assay or hydroxyethyl cellulose dyed with Ostazin Brilliant Red H-3B. The B. circulans and B. subtilis PAP115 endo-beta-1,4-glucanase genes were shown to be homologous by the use of restriction endonuclease site mapping, DNA-DNA hybridization, S1 nuclease digestion after heteroduplex formation, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the protein products. Analysis of the nucleotide sequence of 3.1 kilobase pairs of cloned B. polymyxa DNA revealed two convergently transcribed open reading frames (ORFs) consisting of 398 codons (endoglucanase) and 187 codons (ORF2) and separated by 374 nucleotides. The coding region of the B. polymyxa endoglucanase gene would theoretically produce a 44-kilodalton preprotein. Expression of the B. polymyxa endoglucanase in Escherichia coli was due to a fusion of the endoglucanase gene at codon 30 with codon 9 of the lacZ alpha-peptide gene. The B. polymyxa endoglucanase has 34% amino acid similarity to the Clostridium thermocellum celB endoglucanase sequence but very little similarity to endoglucanases from other Bacillus species. ORF2 has 28% amino acid similarity to the NH2-terminal half of the E. coli lac repressor protein, which is responsible for DNA binding.

Cloning of Thermomonospora fusca genes coding for beta 1-4 endoglucanases E1, E2 and E5

Thermomonospora fusca chromosomal DNA was partially digested with EcoRI and fragments in the size range from 4 to 15 kb were isolated, ligated into lambda gtWES.lambda B arms, packaged, and the recombinant phages plated on Escherichia coli. The plaques were screened for carboxymethyl cellulase (CMCase) activity by a gel overlay procedure, and 25 plaques were positive among the 15,000 plaques that were screened. Positive phages were amplified and used to prepare infected E. coli extracts which were assayed for CMCase activity before and after treatment with antisera prepared against five purified T. fusca beta 1-4 endoglucanases (E1-E5). One phage produced an enzyme that was inhibited by E1 antiserum, nine of the phages produced enzymes that were inhibited by E2 antiserum, 14 produced enzymes that were inhibited by E5 antiserum and the enzyme produced by the other phages was not inhibited by any of the five antisera. The DNA insert present in the phage coding for E1 was cut into a number of different fragments which were subcloned into E. coli first using lambda gtWES.lambda B and then plasmid pBR322. The smallest active subclone, pTE12, contained a 3.1-kb insert. The insert present in one of the phages coding for E2 was also subcloned and the smallest active subclone pTE23 contained a 2-kb insert. E. coli HB101 containing plasmid pTE12 or pTE23 produced enzymes that were identical to E1 and E2, respectively, in all the properties tested.