A method for genetic transformation of nonprotoplasted Streptococcus lactis

Genetics of Unstudied Thermophiles for Industry

Thermophilic organisms hold great potential for industry due to their numerous advantages in biotechnological applications such as higher reaction rate, higher substrate loading, decreased susceptibility to reaction contamination, energy savings in industrial fermentations, and ability to express thermostable proteins that can be utilized in many important industrial processes. Bioprospecting for thermophiles will continue to reveal new enzymatic and metabolic paradigms with industrial applicability. In order to translate these paradigms to production scale, routine methods for microbial genetic engineering are needed, yet remain to be developed in many newly isolated thermophiles. Major challenges and recent developments in the establishment of reliable genetic systems in thermophiles are discussed. Here, we use a hyperthermophilic, cellulolytic bacterium, Caldicellulosiruptor bescii, as a case study to demonstrate the development of a genetic system for an industrially useful thermophile, describing in detail methods for transformation, genetic tool utilization, and chromosomal modification using targeted gene deletion and insertion techniques.

Insertion of Transposon Tn917 Derivatives into the Lactococcus lactis subsp. lactis Chromosome

Two transposition vectors, pTV32 and pLTV1, containing transposon Tn917 derivatives TV32 and LTV1, respectively, were introduced into Lactococcus lactis subsp. lactis MG1614. It was found that pTV32 and pLTV1 replicate and that TV32 and LTV1 transpose in this strain. A protocol for production of a collection of Tn917 insertions in L. lactis subsp. lactis was developed. The physical locations of TV32 on the chromosomal SmaI fragments of 62 independent transpositions were established by pulsed-field gel electrophoresis. These transpositions could be divided into at least 38 different groups that exhibited no Tn917-dominating hot spots on the L. lactis subsp. lactis chromosome. A total of 10 of the 62 transpositions resulted in strains that express beta-galactosidase. This indicates that there was fusion of the promoterless lacZ of the Tn917 derivatives to a chromosomal promoter. Thus, the Tn917-derived transposons should be powerful genetic tools for studying L. lactis subsp. lactis.

High-Frequency Transformation, by Electroporation, of Lactococcus lactis subsp. cremoris Grown with Glycine in Osmotically Stabilized Media

An efficient method for genetic transformation of lactococci by electroporation is presented. Highly competent lactococci for electrotransformation were obtained by growing cells in media containing high concentrations of glycine and 0.5 M sucrose as the osmotic stabilizers. These cells could be stored at -85 degrees C without loss of competence. With Lactococcus lactis subsp. cremoris BC101, a transformation frequency of 5.7 x 10 transformants per mug of pIL253 DNA was obtained, which represents 5% of the surviving cells. All the lactococcal strains tested could be transformed by the present method.

Electrotransformation of Clostridium thermocellum

Electrotransformation of several strains of Clostridium thermocellum was achieved using plasmid pIKm1 with selection based on resistance to erythromycin and lincomycin. A custom-built pulse generator was used to apply a square 10-ms pulse to an electrotransformation cuvette consisting of a modified centrifuge tube. Transformation was verified by recovery of the shuttle plasmid pIKm1 from presumptive transformants of C. thermocellum with subsequent PCR specific to the mls gene on the plasmid, as well as by retransformation of Escherichia coli. Optimization carried out with strain DSM 1313 increased transformation efficiencies from <1 to (2.2 +/- 0.5) x 10(5) transformants per micro g of plasmid DNA. Factors conducive to achieving high transformation efficiencies included optimized periods of incubation both before and after electric pulse application, chilling during cell collection and washing, subculture in the presence of isoniacin prior to electric pulse application, a custom-built cuvette embedded in an ice block during pulse application, use of a high (25-kV/cm) field strength, and induction of the mls gene before plating the cells on selective medium. The protocol and preferred conditions developed for strain DSM 1313 resulted in transformation efficiencies of (5.0 +/- 1.8) x 10(4) transformants per micro g of plasmid DNA for strain ATCC 27405 and approximately 1 x 10(3) transformants per micro g of plasmid DNA for strains DSM 4150 and 7072. Cell viability under optimal conditions was approximately 50% of that of controls not exposed to an electrical pulse. Dam methylation had a beneficial but modest (7-fold for strain ATCC 27405; 40-fold for strain DSM 1313) effect on transformation efficiency. The effect of isoniacin was also strain specific. The results reported here provide for the first time a gene transfer method functional in C. thermocellum that is suitable for molecular manipulations involving either the introduction of genes associated with foreign gene products or knockout of native genes.

Microbial cellulose utilization: fundamentals and biotechnology

Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of cellulosic biomass, taxonomic diversity, cellulase enzyme systems, molecular biology of cellulase enzymes, physiology of cellulolytic microorganisms, ecological aspects of cellulase-degrading communities, and rate-limiting factors in nature. The methodological basis for studying microbial cellulose utilization is considered relative to quantification of cells and enzymes in the presence of solid substrates as well as apparatus and analysis for cellulose-grown continuous cultures. Quantitative description of cellulose hydrolysis is addressed with respect to adsorption of cellulase enzymes, rates of enzymatic hydrolysis, bioenergetics of microbial cellulose utilization, kinetics of microbial cellulose utilization, and contrasting features compared to soluble substrate kinetics. A biological perspective on processing cellulosic biomass is presented, including features of pretreated substrates and alternative process configurations. Organism development is considered for "consolidated bioprocessing" (CBP), in which the production of cellulolytic enzymes, hydrolysis of biomass, and fermentation of resulting sugars to desired products occur in one step. Two organism development strategies for CBP are examined: (i) improve product yield and tolerance in microorganisms able to utilize cellulose, or (ii) express a heterologous system for cellulose hydrolysis and utilization in microorganisms that exhibit high product yield and tolerance. A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts.

Microbial cellulose utilization: fundamentals and biotechnology

Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of cellulosic biomass, taxonomic diversity, cellulase enzyme systems, molecular biology of cellulase enzymes, physiology of cellulolytic microorganisms, ecological aspects of cellulase-degrading communities, and rate-limiting factors in nature. The methodological basis for studying microbial cellulose utilization is considered relative to quantification of cells and enzymes in the presence of solid substrates as well as apparatus and analysis for cellulose-grown continuous cultures. Quantitative description of cellulose hydrolysis is addressed with respect to adsorption of cellulase enzymes, rates of enzymatic hydrolysis, bioenergetics of microbial cellulose utilization, kinetics of microbial cellulose utilization, and contrasting features compared to soluble substrate kinetics. A biological perspective on processing cellulosic biomass is presented, including features of pretreated substrates and alternative process configurations. Organism development is considered for "consolidated bioprocessing" (CBP), in which the production of cellulolytic enzymes, hydrolysis of biomass, and fermentation of resulting sugars to desired products occur in one step. Two organism development strategies for CBP are examined: (i) improve product yield and tolerance in microorganisms able to utilize cellulose, or (ii) express a heterologous system for cellulose hydrolysis and utilization in microorganisms that exhibit high product yield and tolerance. A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts.

A system to generate chromosomal mutations in Lactococcus lactis which allows fast analysis of targeted genes

A system for generating chromosomal insertions in lactococci is described. It is based on the conditional replication of lactococcal pWV01-derived Ori+ RepA- vector pORI19, containing lacZ alpha and the multiple cloning site of pUC19. Chromosomal AluI fragments of Lactococcus lactis were cloned in pORI19 in RepA+ helper strain Escherichia coli EC101. The frequency of Campbell-type recombinants, following introduction of this plasmid bank into L. lactis (RepA-), was increased by combining the system with temperature-sensitive pWV01 derivative pVE6007. Transformation of L. lactis MG1363 (pVE6007) with the pORI19 bank of lactococcal chromosomal fragments at the permissive temperature allowed replication of several copies of a recombinant plasmid from the bank within a cell because of the provision in trans of RepA-Ts from pVE6007. A temperature shift to 37 degrees C resulted in loss of pVE6007 and integration of the pORI19 derivatives at high frequencies. A bank of lactococcal mutants was made in this way and successfully screened for the presence of two mutations: one in the monocistronic 1.3-kb peptidoglycan hydrolase gene (acmA) and one in the hitherto uncharacterized maltose fermentation pathway. Reintroduction of pVE6007 into the Mal- mutant at 30 degrees C resulted in excision of the integrated plasmid and restoration of the ability of ferment maltose. The integration plasmid (pMAL) was rescued by using the isolated plasmid content of a restored Mal+ colony to transform E. coli EC101. Nucleotide sequencing of the 564-bp chromosomal fragment in pMAL revealed an internal part of an open reading frame of which the translated product showed significant homology with ATP-binding proteins MalK of E. coli, Salmonella typhimurium, and Enterobacter aerogenes and MsmK of Streptococcus mutans. This combined use of two types of conditional replicating pWV01-derived vectors represents a novel, powerful tool for chromosomal gene inactivation, targeting, cloning, and sequencing of the labelled gene.

Functional analysis of the gene encoding the clavaminate synthase 2 isoenzyme involved in clavulanic acid biosynthesis in Streptomyces clavuligerus

A Streptomyces clavuligerus mutant disrupted in cas2, encoding the clavaminate synthase (CAS2) isoenzyme, was constructed by a gene replacement procedure. The resulting cas2 mutant showed no clavulanic acid production when grown in starch-asparagine medium. However, in soy medium, the cas2 mutant did produce clavulanic acid, although in amounts less than those produced by wild-type cultures. This medium-dependent leaky phenotype correlated well with the presence of the cas1 transcript, encoding the CAS1 isoenzyme, in cultures grown in soy medium and with its absence from those grown in starch-asparagine medium. This suggested that CAS1 and CAS2 both contribute to clavulanic acid production but that their production is regulated differently. Under nutritional conditions in which cas1 expression is blocked, cas2 becomes essential for clavulanic acid production. Northern (RNA) analysis revealed that while cas1 is transcribed as a 1.4-kb monocistronic transcript only, cas2 is transcribed both as a 1.2-kb monocistronic transcript and as part of a 5.3-kb polycistronic transcript. High-resolution S1 nuclease analysis located the transcription start point of the monocistronic cas2 transcript at a C residue 103 nucleotides upstream from the cas2 start codon.

Transposable elements in Lactococci: a review

Genetic studies have identified the presence of transposable elements within the genus Lactococcus, which includes industrially important microorganisms used in the production of fermented dairy products. Three insertion sequences have been fully characterized in addition to several reports of transpositionlike events. The three insertion sequence elements, ISS1, IS904, and IS981, exhibit the physical and genetic properties characteristic of known insertion sequences. They are closely related to insertion sequences isolated from a wide variety of microorganisms. In lactococci, insertion sequence elements are associated with lactose and sucrose metabolism, proteinase activity, nisin production and immunity, conjugal transfer determinants, and bacteriophage resistance, which are attributes significant for growth in a milk environment. The characteristics, involvement in lactococcal evolution, and recent developments as tools for genetic engineering of the lactococcal elements are discussed.

IS946-mediated integration of heterologous DNA into the genome of Lactococcus lactis subsp. lactis

The lactococcal insertion sequence IS946 was used to construct suicide vectors for insertion of heterologous DNA into chromosomal and plasmid sequences of Lactococcus lactis subsp. lactis. Electroporation of L. lactis strains, including the recombination-deficient strain MMS362, with the suicide vector pTRK145 yielded 10(1) to 10(3) transformants per micrograms of DNA. pTRK145 insertions occurred primarily in the chromosome, with one insertion detected in a resident plasmid. Vector-specific probes identified junction fragments that varied among transformants, indicating random insertions of pTRK145.

Construction of an IS946-based composite transposon in Lactococcus lactis subsp. lactis

An artificial composite transposon was constructed based on the lactococcal insertion sequence IS946. A 3.0-kb element composed of the pC194 cat gene (Cmr) flanked by inversely repeated copies of IS946 was assembled on pBluescript KS+. When subcloned into the shuttle vector pSA3 (Emr), two putative transposons were created on the recombinant plasmid pTRK128: the 3.0-kb Cmr element (Tn-CmA) and an inverse 11.5-kb Emr element (Tn-EmA). pTRK128 was electroporated into the recombination-deficient strain Lactococcus lactis MMS362, which contains the self-transmissible plasmid pRS01. An MMS362 Cmr Emr transformant was used to assay for transposition events via conjugal mobilization of pTRK128-encoded Cmr or Emr to L. lactis LM2345. Transfer of either marker alone occurred at frequencies of ca. 2 x 10(-4) per input donor. Approximately 19% of the Emr transconjugants were Cms, indicating loss of the cat gene marker. No Cmr Ems transconjugants were recovered (n = 550). Plasmid analysis showed that the Cms Emr isolates contained a single large plasmid that was determined to be a cointegrate between pRS01 and the Tn-EmA element. A 32P-labeled pSA3 probe hybridized specifically to pTRK128 sequences and revealed different junction fragments within each of the cointegrate plasmids. DNA sequence analysis of the Tn-EmA::pRS01 junctions from a representative cointegrate verified transposition by Tn-EmA. This represents the first example of a functional composite transposon in the genus Lactococcus and serves as an experimental tool and model for the genetic analyses of transposons in these organisms.

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.

In vivo genetic systems in lactic acid bacteria

A review of in vivo genetic systems covers the key features of transduction and conjugation but emphasises the intramolecular and intermolecular DNA interactions that are often associated with these processes. As well as the transfer of many lactose plasmids, conjugal transfer of nisin genes and the use of conjugation to construct bacteriophage-resistant dairy starter cultures are discussed. The discovery and characterization of insertion sequences in Lactobacillus and Lactococcus and the exploitation of heterologous conjugation and transposition systems in the lactic acid bacteria are described.

Genetic transformation of intact Lactococcus lactis subsp. lactis by high-voltage electroporation

To apply recombinant DNA techniques for genetic manipulation of the industrially important lactococci, an efficient and reliable high-frequency transformation system must be available. High-voltage electric pulses have been demonstrated to enhance uptake of DNA into protoplasts and intact cells of numerous gram-negative and gram-positive microorganisms. The objective of this study was to develop a system for electroporating intact cells of Lactococcus lactis subsp. lactis LM0230 (previously designated Streptococcus lactis LM0230) with a commercially available electroporation unit (BTX Transfector 100; BTX, Inc., San Diego, Calif.). Parameters which influenced the efficiency of transformation included growth phase and final concentration of cells, ionic strength of the suspending medium, concentration of plasmid DNA, and the amplitude and duration of the pulse. Washed suspensions of intact cells suspended in deionized distilled water were subjected to one high-voltage electric pulse varying in voltage (300 to 900 V corresponding to field strengths of 5 to 17 kV/cm) and duration (100 microseconds to 1 s). Transformation efficiencies of 10(3) transformants per microgram of DNA were obtained when dense suspensions (final concentration, 5 x 10(10) CFU/ml) of stationary-phase cells were subjected to one pulse with a peak voltage of 900 V (field strength, 17 kV/cm) and a pulse duration of 5 ms in the presence of plasmid DNA. Dilution of porated cells in broth medium followed by an expression period of 2 h at 30 degrees C was beneficial in enhancing transformation efficiencies. Plasmids ranging in size from 9.8 to 30.0 kilobase pairs could be transformed by this procedure.

Evidence for the conjugal transfer of the broad host range plasmid pIP501 into strains of Lactobacillus helveticus

The conjugative broad host range plasmid pIP501 was transferred from Streptococcus faecalis to a series of strains of lactic streptococci used commercially as dairy starter cultures. With these transconjugants as donors the plasmid was exconjugated to two strains of Lactobacillus helveticus and a commercially used strain of Strep. thermophilus. There was evidence that the plasmid could transfer between isogenic derivatives of one of the strains of Lact. helveticus. Transfer from Lact. helveticus to Strep. faecalis was also detected but at a low frequency. There was no evidence for the conjugal transfer of plasmid pIP501 into a strain of Lact. bulgaricus by exconjugation from either lactic streptococci or Lactobacillus sp.

A Simple and Rapid Method for Genetic Transformation of Lactic Streptococci by Electroporation

An electroporation procedure for the plasmid-mediated genetic transformation of intact cells of Streptococcus cremoris and Streptococcus lactis was performed. Ten different strains were transformed. The method was simple and rapid and yielded transformant colonies in 14 to 24 h. The method was optimized for S. lactis LM0230, and transformation frequencies of between 1 x 10 and 5 x 10 transformants per mug of purified plasmid (pMU1328) were achieved routinely. The optimized procedure involved lysozyme treatment of cells. Transformation of LM0230 occurred at comparable frequencies with pLS1 (4.4 kilobase pair [kbp]), pMU1328 (7.4 kbp), and pAMbeta1 (26.5 kbp). Plasmid DNA isolated from transformants had not undergone detectable deletions or rearrangements. Transformation was possible with plasmid DNA which was religated after restriction endonuclease digestion. Phage DNA-dependent transfection of S. lactis LM0230 and S. lactis C6 was also achieved.

Phage resistance in lactic acid bacteria

The interactions between lactic acid bacteria and their phages are commercially significant. Current research has focused on the elucidation of the mechanisms and genetics of phage resistance. Phage resistance genes have been linked to plasmid DNA for Streptococcus lactis and Streptococcus cremoris, and preliminary studies suggest the operation of mechanisms such as the prevention of phage adsorption, restriction/modification, and abortive infection. Some phage resistance plasmids can be conjugally transferred, providing a means of dissemination among phage-sensitive strains for the construction of phage-resistant starter cultures.