Bacterial aerosol emission rates from municipal wastewater aeration tanks

A critical review on bioaerosols-dispersal of crop pathogenic microorganisms and their impact on crop yield

Bioaerosols are potential sources of pathogenic microorganisms that can cause devastating outbreaks of global crop diseases. Various microorganisms, insects and viroids are known to cause severe crop diseases impeding global agro-economy. Such losses threaten global food security, as it is estimated that almost 821 million people are underfed due to global crisis in food production. It is estimated that global population would reach 10 billion by 2050. Hence, it is imperative to substantially increase global food production to about 60% more than the existing levels. To meet the increasing demand, it is essential to control crop diseases and increase yield. Better understanding of the dispersive nature of bioaerosols, seasonal variations, regional diversity and load would enable in formulating improved strategies to control disease severity, onset and spread. Further, insights on regional and global bioaerosol composition and dissemination would help in predicting and preventing endemic and epidemic outbreaks of crop diseases. Advanced knowledge of the factors influencing disease onset and progress, mechanism of pathogen attachment and penetration, dispersal of pathogens, life cycle and the mode of infection, aid the development and implementation of species-specific and region-specific preventive strategies to control crop diseases. Intriguingly, development of R gene-mediated resistant varieties has shown promising results in controlling crop diseases. Forthcoming studies on the development of an appropriately stacked R gene with a wide range of resistance to crop diseases would enable proper management and yield. The article reviews various aspects of pathogenic bioaerosols, pathogen invasion and infestation, crop diseases and yield.

A systematic review of enteric pathogens and antibiotic resistance genes in outdoor urban aerosols

Aerosol transport of enteric microbiota including fecal pathogens and antimicrobial resistance genes (ARGs) has been documented in a range of settings but remains poorly understood outside indoor environments. We conducted a systematic review of the peer-reviewed literature to summarize evidence on specific enteric microbiota including enteric pathogens and ARGs that have been measured in aerosol samples in urban settings where the risks of outdoor exposure and antibiotic resistance (AR) spread may be highest. Following PRISMA guidelines, we conducted a key word search for articles published within the years 1990-2020 using relevant data sources. Two authors independently conducted the keyword searches of databases and conducted primary and secondary screenings before merging results. To be included, studies contained extractable data on enteric microbes and AR in outdoor aerosols regardless of source confirmation and reported on qualitative, quantitative, or viability data on enteric microbes or AR. Qualitative analyses and metric summaries revealed that enteric microbes and AR have been consistently reported in outdoor aerosols, generally via relative abundance measures, though gaps remain preventing full understanding of the role of the aeromicrobiological pathway in the fate and transport of enteric associated outdoor aerosols. We identified remaining gaps in the evidence base including a need for broad characterization of enteric pathogens in bioaerosols beyond bacterial genera, a need for greater sampling in locations of high enteric disease risk, and a need for quantitative estimation of microbial and nucleic acid densities that may be applied to fate and transport models and in quantitative microbial risk assessment.

Bioaerosolization and pathogen transmission in wastewater treatment plants: Microbial composition, emission rate, factors affecting and control measures

Environmental consequences during wastewater management are vital and getting increased attention to interrupt any possible disease transmission pathways. Evidence of bioaerosolization of pathogen from wastewater to atmosphere during wastewater treatment have been highlighted previously. Understanding aerosol-based transmission in wastewater treatment plant (WWTP) is important because of the hazard it presents to the workers involved or to the population around and appears to be very significant during pandemic occurrences. This work aims to evaluate the possibility of pathogenic content of wastewater getting aerosolized during treatment by synthesizing the evidence on the potential aerosol generating treatment phases of WWTP, bioaerosol microbial composition, emission load and the factors affecting the bioaerosol formation. We also present some potential control strategies to take up in WWTP which may be useful to avoid such occurrences. Implementation of Aeration based strategies (use of diffused, submerged aeration, reduction in aeration rate), Improved ventilation based strategies (effective ventilation with adequate supply of clean air, minimizing air recirculation, supplementation with infection control measures such as filtration, irradiation), Improved protection based strategy (periodic monitoring of disinfection efficiency, pathogenic load of wastewater, improved operation policy) and other strategies (provision of buffer zone, wind shielding, water spraying on aerosol, screened surface of treatment units) could be very much relevant and significant in case of disease outbreak through aerosol formation in wastewater environment. Recent progress in sensor-based data collection, analysis, cloud-based storage, and early warning techniques in WWTP may help to reduce the risk of infectious transmission, especially during a pandemic situation.

Detection and Quantification of Enteric Pathogens in Aerosols Near Open Wastewater Canals in Cities with Poor Sanitation

Urban sanitation infrastructure is inadequate in many low-income countries, leading to the presence of highly concentrated, uncontained fecal waste streams in densely populated areas. Combined with mechanisms of aerosolization, airborne transport of enteric microbes and their genetic material is possible in such settings but remains poorly characterized. We detected and quantified enteric pathogen-associated gene targets in aerosol samples near open wastewater canals (OWCs) or impacted (receiving sewage or wastewater) surface waters and control sites in La Paz, Bolivia; Kanpur, India; and Atlanta, USA, via multiplex reverse-transcription qPCR (37 targets) and ddPCR (13 targets). We detected a wide range of enteric targets, some not previously reported in extramural urban aerosols, with more frequent detections of all enteric targets at higher densities in La Paz and Kanpur near OWCs. We report density estimates ranging up to 4.7 × 10² gc per m_air³ across all targets including heat-stable enterotoxigenic Escherichia coli, Campylobacter jejuni, enteroinvasive E. coli/Shigella spp., Salmonella spp., norovirus, and Cryptosporidium spp. Estimated 25, 76, and 0% of samples containing positive pathogen detects were accompanied by culturable E. coli in La Paz, Kanpur, and Atlanta, respectively, suggesting potential for viability of enteric microbes at the point of sampling. Airborne transmission of enteric pathogens merits further investigation in cities with poor sanitation.

Emerging Technologies for Aerial Decontamination of Food Storage Environments to Eliminate Microbial Cross-Contamination

Air is recognized as an important source of microbial contamination in food production facilities and has the potential to contaminate the food product causing food safety and spoilage issues for the food industry. Potential for aerial microbial contamination of food can be a particular issue during storage in cold rooms when the food is not packaged and is exposed to contaminated air over a prolonged period. Thus, there are potential benefits for the food industry for an aerial decontamination in cold storage facilities. In this paper, aerial decontamination approaches are reviewed and challenges encountered for their applications are discussed. It is considered that current systems may not be completely effective and environmentally friendly, therefore, it is of great significance to consider the development of nonresidual and verified decontamination technologies for the food industry and, in particular, for the cold storage rooms.

Reducing bacterial aerosol emissions from membrane bioreactors: The impact of SRT and the addition of PAC and calcium

Bacterial aerosols resulting from membrane bioreactor (MBR) processes, which require excessive aeration in a confined space, are important to investigate because of their possible adverse effects on human health. This study investigated the influence of solid retention time (SRT) on bacterial aerosols from MBRs. Moreover, powdered activated carbon (PAC) and calcium were used to attenuate bacterial aerosol emissions from MBRs. The particulate matter (PM) emitted from the MBRs was reduced by 30.5 and 25.2% at SRTs of 20 and 80 d, respectively, compared to the level emitted at an SRT of 10 d. Total cell counts were similarly reduced at SRTs of 20 and 80 d. Longer SRTs also led to greater reductions in the particle size distribution of the sludge within 10 μm. Several factors in the MBR influenced the behavior of the bacterial aerosol emissions from the MBRs. This study showed that changes in viscosity and particle size induced by the SRT influenced the bacterial aerosol emissions in MBRs. Therefore, SRT was identified as an important design parameter affecting bacterial aerosol emissions in MBR processes. The amounts of particulate matter and bacterial aerosols were reduced in MBRs using PAC and calcium, both of which exerted an immediate effect on the bacterial aerosol emissions in MBRs by increasing the aerosol-particle size.

Assessment of airborne microorganism contamination in an industrial area characterized by an open composting facility and a wastewater treatment plant

In order to assess the potential exposure hazard to workers and people living in the immediate surroundings of an area characterized by an open composting facility and a wastewater treatment plant, a quantitative and a qualitative analysis of airborne microorganisms were carried out. Air sampling was performed once a week for four consecutive weeks in summer and winter. Six sites were selected as air sampling sites: one was upwind at approximately 40 m from the facilities; the other five were downwind at increasing distances from the facilities, with the furthest at 100 m away. Monitoring permitted us to verify the influence that the composting activities and wastewater treatment had on the bacterial and fungal contamination of the air. The results obtained have been expressed by means of contamination indexes that have already been used in previous works: a major microbiological contamination near the plants was evidenced. Near the facilities, mesophilic bacteria, psychrophilic bacteria and microfungi showed the highest median concentrations, respectively, of 307.5, 327.5 and 257.5 CFU/m(3). Moreover, the season generally influenced the concentration of the bacteria as well as of the fungi; higher in summer than in winter. The contamination index global index of microbial contamination (GIMC/m(3)) showed mean values of 4058.9 in summer and 439.7 in winter and the contamination index-amplification index (AI) showed values of 4.5 and 1.1 in the same seasons, respectively. Controlling the seasonal effect, mesophilic bacteria, Pseudomonas spp. and Enterobacteriaceae showed a significant decline in concentration with respect to upwind air samples and with increasing distance. Both GIMC and AI showed a significant decline with respect to upwind air samples by increasing the distance from facilities after adjusting for the seasonal effect. In conclusion, even if these plants do not represent a potential risk for nearby populations, they may pose a potential health risk for workers.

Estimated occupational risk from bioaerosols generated during land application of class B biosolids

Some speculate that bioaerosols from land application of biosolids pose occupational risks, but few studies have assessed aerosolization of microorganisms from biosolids or estimated occupational risks of infection. This study investigated levels of microorganisms in air immediately downwind of land application operations and estimated occupational risks from aerosolized microorganisms. In all, more than 300 air samples were collected downwind of biosolids application sites at various locations within the United States. Coliform bacteria, coliphages, and heterotrophic plate count (HPC) bacteria were enumerated from air and biosolids at each site. Concentrations of coliforms relative to Salmonella and concentrations of coliphage relative to enteroviruses in biosolids were used, in conjunction with levels of coliforms and coliphages measured in air during this study, to estimate exposure to Salmonella and enteroviruses in air. The HPC bacteria were ubiquitous in air near land application sites whether or not biosolids were being applied, and concentrations were positively correlated to windspeed. Coliform bacteria were detected only when biosolids were being applied to land or loaded into land applicators. Coliphages were detected in few air samples, and only when biosolids were being loaded into land applicators. In general, environmental parameters had little impact on concentrations of microorganisms in air immediately downwind of land application. The method of land application was most correlated to aerosolization. From this large body of data, the occupational risk of infection from bioaerosols was estimated to be 0.78 to 2.1%/yr. Extraordinary exposure scenarios carried an estimated annual risk of infection of up to 34%, with viruses posing the greatest threat. Risks from aerosolized microorganisms at biosolids land application sites appear to be lower than those at wastewater treatment plants, based on previously reported literature.

Site-related airborne biological hazard and seasonal variations in two wastewater treatment plants

Results of a study conducted to assess the degree of airborne bacterial contamination generated by two wastewater treatment plants (WWTP) with different treatment systems and evaluate the dispersion of potential pathogens, have been described. Aerosols samples were collected in summer and winter with an agar impact sampler from several plant sites. External upwind and downwind controls were also examined. Total colony-forming counts of mesophilic and thermophilic bacteria, actinomycetes and streptomycetes, Gram-negatives, coliforms and sulfite-reducers were determined. Selective media were used in order to detect pathogenic bacteria. The lowest concentrations of mesophilic and thermophilic bacteria were 8 and 28 CFU/m(3) in plants A and B respectively, the highest >40,000 CFU/m(3) in both plants. Strains of Escherichia coli, Clostridium perfringens, Staphylococcus aureus and Enterococcus spp. were isolated in some sites of the two plants. Salmonella spp., Yersinia enterocolitica and Legionella spp. were never detected. The activities involving nebulization and mechanical aeration of wastewaters and the sewage inflows have proved to be of greatest potential risk. In both plants, we found a statistically significant dependence of bacterial contamination on the season for many of the analyzed parameters but a clear seasonal trend could not be observed.

The assessment of airborne bacterial contamination in three composting plants revealed site-related biological hazard and seasonal variations

AIMS

The purpose of this study was to evaluate the degree of bacterial contamination generated by three Italian composting plants (1, 2 and 3) in two different seasons and to assess the health risk for the employees.

METHODS AND RESULTS

Aerosols samples were collected with an agar impact sampler. Several plant sites and external upwind and downwind controls were examined. Total colony-forming counts of mesophilic and thermophilic bacteria, actinomycetes and streptomycetes, Gram-negatives, coliforms and sulfite-reducers were determined. Selective media were used in order to isolate pathogenic bacteria. The levels of total mesophilic and thermophilic micro-organisms ranged between 33 and >40,000 CFU m(-3) in plant 1, 39 and 18,700 CFU m(-3) in plant 2 and 261 and 6278 CFU m(-3) in plant 3. Strains of Escherichia coli, Staphylococcus aureus and Clostridium perfringens were also found.

CONCLUSIONS

The plants monitored in this study have proved to be sources of aerosolized bacteria. The activities involving mechanical movement of the composting mass and the indoor activities were of greatest potential risk. In all the studied plants, a statistically significant dependence was found between the bacterial contamination and the season for some or almost all the analysed parameters, but a clear seasonal trend could not be observed.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study provides broad evidence of bacterial aerosol dispersion and site-related biological hazards that may be useful to the regional government to implement regulations on worker safety in composting plants.

A molecular typing approach for evaluating bioaerosol exposure in wastewater treatment plant workers

Bioaerosols associated with wastewater treatment process may represent a health risk for occupationally exposed personnel. To evaluate microbial contamination in plant workers, we compared oral cavity isolates against isolates collected from aerosol surrounding the aeration basin. Typing was performed by metabolic profile and arbitrarily primed-polymerase chain reaction. The latter is more sensitive and rapid than conventional tests. After comparison, isolates from the air samples were not related to those obtained from the exposed workers. This molecular approach can support bioaerosol risk evaluation .