Production and characterization of a thermostable alcohol dehydrogenase that belongs to the aldo-keto reductase superfamily

Enzyme Engineering by Force: DNA Springs for the Modulation of Biocatalytic Trajectories

The engineering of enzymatic activity generally involves alteration of the protein primary sequences, which introduce structural changes that give rise to functional improvements. Mechanical forces have been used to interrogate protein biophysics, leading to deep mechanistic insights in single-molecule studies. Here, we use simple DNA springs to apply small pulling forces to perturb the active site of a thermostable alcohol dehydrogenase. Methods were developed to enable the study of different spring lengths and spring orientations under bulk catalysis conditions. Tension applied across the active site expanded the binding pocket volume and shifted the preference of the enzyme for longer chain-length substrates, which could be tuned by altering the spring length and the resultant applied force. The substrate specificity changes did not occur when the DNA spring was either severed or rotated by ∼90°. These findings demonstrate an alternative approach in protein engineering, where active site architectures can be dynamically and reversibly remodeled using applied mechanical forces.

A novel alcohol dehydrogenase in the hyperthermophilic crenarchaeon Hyperthermus butylicus

Hyperthermus butylicus is a hyperthermophilic crenarchaeon that produces 1-butanol as an end product. A thermostable alcohol dehydrogenase (ADH) must be present in H. butylicus to act as the key enzyme responsible for this production; however, the gene that encodes the ADH has not yet been identified. A novel ADH, HbADH2, was purified from a cell-free extract of H. butylicus, and its characteristics were determined. The gene that encodes HbADH2 was demonstrated to be HBUT_RS04850 and annotated as a hypothetical protein in H. butylicus. HbADH2 was found to be a primary-secondary ADH capable of using a wide range of substrates, including butyraldehyde and butanol. Butyraldehyde had the highest specificity constant, calculated as k c at/K m, with k cat and apparent K m values of 8.00 ± 0.22 s-1 and 0.59 ± 0.07 mM, respectively. The apparent K m values for other substrates, including ethanol, 1-propanol, 2-propanol, butanol, acetaldehyde, propanal, and acetone, were 4.36 ± 0.42, 4.69 ± 0.41, 3.74 ± 0.46, 2.44 ± 0.30, 1.27 ± 0.18, 1.55 ± 0.20, and 0.68 ± 0.04 mM, respectively. The optimal pH values for catalyzing aldehyde reduction and alcohol oxidation were 6.0 and 9.0, respectively, while the optimal temperature was higher than 90°C due to the increase in enzymatic activity from 60°C to 90°C. Based on its substrate specificity, enzyme kinetics, and thermostability, HbADH2 may be the ADH that catalyzes the production of 1-butanol in H. butylicus. The putative conserved motif sites for NAD(P)+ and iron binding were identified by aligning HbADH2 with previously characterized Fe-containing ADHs.

Higher-Order VLP-Based Protein Macromolecular Framework Structures Assembled via Coiled-Coil Interactions

Hierarchical organization is one of the fundamental features observed in biological systems that allows for efficient and effective functioning. Virus-like particles (VLPs) are elegant examples of a hierarchically organized supramolecular structure, where many subunits are self-assembled to generate the functional cage-like architecture. Utilizing VLPs as building blocks to construct two- and three-dimensional (3D) higher-order structures is an emerging research area in developing functional biomimetic materials. VLPs derived from P22 bacteriophages can be repurposed as nanoreactors by encapsulating enzymes and modular units to build higher-order catalytic materials via several techniques. In this study, we have used coiled-coil peptide interactions to mediate the P22 interparticle assembly into a highly stable, amorphous protein macromolecular framework (PMF) material, where the assembly does not depend on the VLP morphology, a limitation observed in previously reported P22 PMF assemblies. Many encapsulated enzymes lose their optimum functionalities under the harsh conditions that are required for the P22 VLP morphology transitions. Therefore, the coiled-coil-based PMF provides a fitting and versatile platform for constructing functional higher-order catalytic materials compatible with sensitive enzymes. We have characterized the material properties of the PMF and utilized the disordered PMF to construct a biocatalytic 3D material performing single- and multistep catalysis.

Manipulating Fermentation Pathways in the Hyperthermophilic Archaeon Pyrococcus furiosus for Ethanol Production up to 95°C Driven by Carbon Monoxide Oxidation

Genetic engineering of hyperthermophilic organisms for the production of fuels and other useful chemicals is an emerging biotechnological opportunity. In particular, for volatile organic compounds such as ethanol, fermentation at high temperatures could allow for straightforward separation by direct distillation. Currently, the upper growth temperature limit for native ethanol producers is 72°C in the bacterium Thermoanaerobacter ethanolicus JW200, and the highest temperature for heterologously-engineered bioethanol production was recently demonstrated at 85°C in the archaeon Pyrococcus furiosus. Here, we describe an engineered strain of P. furiosus that synthesizes ethanol at 95°C, utilizing a homologously-expressed native alcohol dehydrogenase, termed AdhF. Ethanol biosynthesis was compared at 75°C and 95°C with various engineered strains. At lower temperatures, the acetaldehyde substrate for AdhF is most likely produced from acetate by aldehyde ferredoxin oxidoreductase (AOR). At higher temperatures, the effect of AOR on ethanol production is negligible, suggesting that acetaldehyde is produced by pyruvate ferredoxin oxidoreductase (POR) via oxidative decarboxylation of pyruvate, a reaction known to occur only at higher temperatures. Heterologous expression of a carbon monoxide dehydrogenase complex in the AdhF overexpression strain enabled it to use CO as a source of energy, leading to increased ethanol production. A genome reconstruction model for P. furiosus was developed to guide metabolic engineering strategies and understand outcomes. This work opens the door to the potential for 'bioreactive distillation' since fermentation can be performed well above the normal boiling point of ethanol. IMPORTANCE Previously, the highest temperature for biological ethanol production was 85°C. Here, we have engineered ethanol production at 95°C by the hyperthermophilic archaeon Pyrococcus furiosus. Using mutant strains, we showed that ethanol production occurs by different pathways at 75°C and 95°C. In addition, by heterologous expression of a carbon monoxide dehydrogenase complex, ethanol production by this organism was driven by the oxidation of carbon monoxide. A genome reconstruction model for P. furiosus was developed to guide metabolic engineering strategies and understand outcomes.

Enhancing Multistep Reactions: Biomimetic Design of Substrate Channeling Using P22 Virus-Like Particles

Many biocatalytic processes inside cells employ substrate channeling to control the diffusion of intermediates for improved efficiency of enzymatic cascade reactions. This inspirational mechanism offers a strategy for increasing efficiency of multistep biocatalysis, especially where the intermediates are expensive cofactors that require continuous regeneration. However, it is challenging to achieve substrate channeling artificially in vitro due to fast diffusion of small molecules. By mimicking some naturally occurring metabolons, nanoreactors are developed using P22 virus-like particles (VLPs), which enhance the efficiency of nicotinamide adenine dinucleotide (NAD)-dependent multistep biocatalysis by substrate channeling. In this design, NAD-dependent enzyme partners are coencapsulated inside the VLPs, while the cofactor is covalently tethered to the capsid interior through swing arms. The crowded environment inside the VLPs induces colocalization of the enzymes and the immobilized NAD, which shuttles between the enzymes for in situ regeneration without diffusing into the bulk solution. The modularity of the nanoreactors allows to tune their composition and consequently their overall activity, and also remodel them for different reactions by altering enzyme partners. Given the plasticity and versatility, P22 VLPs possess great potential for developing functional materials capable of multistep biotransformations with advantageous properties, including enhanced efficiency and economical usage of enzyme cofactors.

Utilizing Alcohol for Alkane Biosynthesis by Introducing a Fatty Alcohol Dehydrogenase

Alkanes produced by microorganisms are expected to be an alternative to fossil fuels as an energy source. Microbial synthesis of alkanes involves the formation of fatty aldehydes via fatty acyl coenzyme A (acyl-CoA) intermediates derived from fatty acid metabolism, followed by aldehyde decarbonylation to generate alkanes. Advancements in metabolic engineering have enabled the construction of such pathways in various microorganisms, including Escherichia coli. However, endogenous aldehyde reductases in the host microorganisms are highly active in converting fatty aldehydes to fatty alcohols, limiting the substrate pool for alkane production. To reuse the alcohol by-product, a screening of fatty alcohol-assimilating microorganisms was conducted, and a bacterial strain, Pantoea sp. strain 7-4, was found to convert 1-tetradecanol to tetradecanal. From this strain, an alcohol dehydrogenase, PsADH, was purified and found to be involved in 1-tetradecanol-oxidizing reaction. Subsequent heterologous expression of the PsADH gene in E. coli was conducted, and recombinant PsADH was purified for a series of biochemical characterizations, including cofactors, optimal reaction conditions, and kinetic parameters. Furthermore, direct alkane production from alcohol was achieved in E. coli by coexpressing PsADH with a cyanobacterial aldehyde-deformylating oxygenase and a reducing system, including ferredoxin and ferredoxin reductase, from Nostoc punctiforme PCC73102. The alcohol-aldehyde-alkane synthetic route established in this study will provide a new approach to utilizing fatty alcohols for the production of alkane biofuel. IMPORTANCE Alcohol dehydrogenases are a group of enzymes found in many organisms. Unfortunately, studies on these enzymes mainly focus on their activities toward short-chain alcohols. In this study, we discovered an alcohol dehydrogenase, PsADH, from the bacterium Pantoea sp. 7-4, which can oxidize 1-tetradecanol to tetradecanal. The medium-chain aldehyde products generated by this enzyme can serve as the substrate of aldehyde-deformylating oxygenase to produce alkanes. The enzyme found in this study can be applied to the biosynthetic pathway involving the formation of medium-chain aldehydes to produce alkanes and other valuable compounds.

Semirational engineering of an aldo-keto reductase KmAKR for overcoming trade-offs between catalytic activity and thermostability

Enzyme engineering usually generates trade-offs between activity, stability, and selectivity. Herein, we report semirational engineering of an aldo-keto reductase (AKR) KmAKR for simultaneously enhancing its thermostability and catalytic activity. Previously, we constructed KmAKR_M9 (W297H/Y296W/K29H/Y28A/T63M/A30P/T302S/N109K/S196C), which showed outstanding activity towards t-butyl 6-chloro-(3R,5S)-dihydroxyhexanoate ((3R,5S)-CDHH), and t-butyl 6-cyano-(3R,5R)-dihydroxyhexanoate, the key chiral building blocks of rosuvastatin and atorvastatin. Under the guidance of computer-aided design including consensus residues analysis and molecular dynamics (MD) simulations, K164, S182, S232, and Q266 were dug out for their thermostability conferring roles, generating the "best" mutant KmAKR_M13 (W297H/Y296W/K29H/Y28A/T63M/A30P/T302S/N109K/S196C/K164E/S232A/S182H/Q266D). The T_m and T₅₀ ¹⁵ values of KmAKR_M13 were 10.4 and 6.1°C higher than that of KmAKR_M9 , respectively. Moreover, it displayed a significantly elevated organic solvent tolerance over KmAKR_M9 . Structural analysis indicated that stabilization of the α-helixes mainly contributed to thermostability enhancement. Under the optimized conditions, KmAKR_M13 completely asymmetrically reduced 400 g/l t-butyl 6-chloro-(5S)-hydroxy-3-oxohexanoate ((5S)-CHOH) in 8.0 h at a high substrate to catalyst ratio (S/C) of 106.7 g/g, giving diastereomerically pure (3R,5S)-CDHH (>99.5% d.e._P ) with a space-time yield (STY) of 449.2 g/l·d.

Characterization of a novel type III alcohol dehydrogenase from Thermococcus barophilus Ch5

The genome of the hyperthermophilic and piezophilic euryarchaeaon Thermococcus barophilus Ch5 encodes three putative alcohol dehydrogenases (Tba ADHs). Herein, we characterized Tba ADH₅₄₇ biochemically and probed its catalytic mechanism by mutational studies. Our data demonstrate that Tba ADH₅₄₇ can oxidize ethanol and reduce acetaldehyde at high temperature with the same optimal temperature (75 °C) and exhibit similar thermostability for oxidization and reduction reactions. However, Tba ADH₅₄₇ has different optimal pH for oxidation and reduction: 8.5 for oxidation and 7.0 for reduction. Tba ADH₅₄₇ is dependent on a divalent ion for its oxidation activity, among which Mn²⁺ is optimal. However, Tba ADH₅₄₇ displays about 20% reduction activity without a divalent ion, and the maximal activity with Fe²⁺. Furthermore, Tba ADH₅₄₇ showcases a strong substrate preference for 1-butanol and 1-hexanol over ethanol and other alcohols. Similarly, Tba ADH₅₄₇ prefers butylaldehyde to acetaldehyde as its reduction substrate. Mutational studies showed that the mutations of residues D195, H199, H262 and H274 to Ala result in the significant activity loss of Tba ADH₅₄₇, suggesting that residues D195, H199, H262 and H274 are responsible for catalysis. Overall, Tba ADH₅₄₇ is a thermoactive ADH with novel biochemical characteristics, thereby allowing this enzyme to be a potential biocatalyst.

Archaea Biotechnology

Archaea are a domain of prokaryotic organisms with intriguing physiological characteristics and ecological importance. In Microbial Biotechnology, archaea are historically overshadowed by bacteria and eukaryotes in terms of public awareness, industrial application, and scientific studies, although their biochemical and physiological properties show a vast potential for a wide range of biotechnological applications. Today, the majority of microbial cell factories utilized for the production of value-added and high value compounds on an industrial scale are bacterial, fungal or algae based. Nevertheless, archaea are becoming ever more relevant for biotechnology as their cultivation and genetic systems improve. Some of the main advantages of archaeal cell factories are the ability to cultivate many of these often extremophilic organisms under non-sterile conditions, and to utilize inexpensive feedstocks often toxic to other microorganisms, thus drastically reducing cultivation costs. Currently, the only commercially available products of archaeal cell factories are bacterioruberin, squalene, bacteriorhodopsin and diether-/tetraether-lipids, all of which are produced utilizing halophiles. Other archaeal products, such as carotenoids and biohydrogen, as well as polyhydroxyalkanoates and methane are in early to advanced development stages, respectively. The aim of this review is to provide an overview of the current state of Archaea Biotechnology by describing the actual state of research and development as well as the industrial utilization of archaeal cell factories, their role and their potential in the future of sustainable bioprocessing, and to illustrate their physiological and biotechnological potential.

Expanding the Application Range of Microbial Oxidoreductases by an Alcohol Dehydrogenase from Comamonas testosteroni with a Broad Substrate Spectrum and pH Profile

Alcohol dehydrogenases catalyse the conversion of a large variety of ketone substrates to the corresponding chiral products. Due to their high regio- and stereospecificity, they are key components in a wide range of industrial applications. A novel alcohol dehydrogenase from Comamonas testosteroni (CtADH) was identified in silico, recombinantly expressed and purified, enzymatically and biochemically investigated as well as structurally characterized. These studies revealed a broad pH profile and an extended substrate spectrum with the highest activity for compounds containing halogens as substituents and a moderate activity for bulky–bulky ketones. Biotransformations with selected ketones—performed with a coupled regeneration system for the co-substrate NADPH—resulted in conversions of more than 99% with all tested substrates and with excellent enantioselectivity for the corresponding S-alcohol products. CtADH/NADPH/substrate complexes modelled on the basis of crystal structures of CtADH and its closest homologue suggested preliminary hints to rationalize the enzyme’s substrate preferences

Tuning the catalytic properties of P22 nanoreactors through compositional control

Enzymes are biomacromolecular protein catalysts that are widely used in a plethora of industrial-scale applications due to their high selectivity, efficiency and ability to work under mild conditions. Many industrial processes require the immobilization of enzymes to enhance their performance and stability. Encapsulation of enzymes in protein cages provides an excellent immobilization platform to create nanoreactors with enhanced enzymatic stability and desired catalytic activities. Here we show that the catalytic activity of nanoreactors, derived from the bacteriophage P22 viral capsids, can be finely-tuned by controlling the packaging stoichiometry and packing density of encapsulated enzymes. The packaging stoichiometry of the enzyme alcohol dehydrogenase (AdhD) was controlled by co-encapsulating it with wild-type scaffold protein (wtSP) at different stoichiometric ratios using an in vitro assembly approach and the packing density was controlled by selectively removing wtSP from the assembled nanoreactors. An inverse relationship was observed between the catalytic activity (k_cat) of AdhD enzyme and the concentration of co-encapsulated wtSP. Selective removal of the wtSP resulted in the similar activity of AdhD in all nanoreactors despite the difference in the volume occupied by enzymes inside nanoreactors, indicating that the AdhD enzymes do not experience self-crowding even under high molarity of confinement (M_conf) conditions. The approach demonstrated here not only allowed us to tailor the activity of encapsulated AdhD catalysts but also the overall functional output of nanoreactors (enzyme-VLP complex). The approach also allowed us to differentiate the effects of crowding and confinement on the functional properties of enzymes encapsulated in an enclosed system, which could pave the way for designing more efficient nanoreactors.

Enhanced Production of Recombinant Alcohol Dehydrogenase Using the Genetically Engineered Escherichia coli Strain that Heterologously Expresses Carrot Heat Shock Protein 70

Escherichia coli (E. coli) has been widely used as a host organism for producing recombinant proteins such as biocatalysts, antibody fragments, and therapeutic hormones. To enhance recombinant protein production, many E. coli strains have been genetically engineered on practical purposes. In this study, we developed the engineered E. coli strain expressing Heat shock protein 70, DcHsp70, from carrot (Daucus carota L.). The DNA construct for DcHsp70 expression, Lipoprotein promoter-DcHsp70 gene-Flippase recognition target cassette, which is flanked by the insertion site yddE pseudogene sequences, was generated by overlap PCR and inserted into the E. coli genome by lambda Red-mediated homologous recombination. To examine if the engineered E. coli cells can effectively produce recombinant proteins, the alcohol dehydrogenase (ADH) gene from a thermophile, Geobacillus stearothermophilus, was cloned into a pET11a expression vector and expressed by isopropyl β-D-1-thiogalactopyranoside treatment. Compared to wild type, the genetically engineered E. coli expressing DcHsp70 exhibited up to approximately 11-fold higher production of his-tagged ADH, mostly in soluble forms. The his-ADH protein that was purified from the engineered cells exhibited the enzyme activity. The genetically engineered E. coli developed in this study can be useful for the efficient production of recombinant proteins, such as recombinant ADH.

Multimerization of an Alcohol Dehydrogenase by Fusion to a Designed Self-Assembling Protein Results in Enhanced Bioelectrocatalytic Operational Stability

Proteins designed for supramolecular assembly provide a simple means to immobilize and organize enzymes for biotechnology applications. We have genetically fused the thermostable alcohol dehydrogenase D (AdhD) from Pyrococcus furiosus to a computationally designed cage-forming protein (O3-33). The trimeric form of the O3-33-AdhD fusion protein was most active in solution. The immobilization of the fusion protein on bioelectrodes leads to a doubling of the electrochemical operational stability as compared to the unfused control proteins. Thus, the fusion of enzymes to the designed self-assembling domains offers a simple strategy to increase the stability in biocatalytic systems.

Catalysis of Thermostable Alcohol Dehydrogenase Improved by Engineering the Microenvironment through Fusion with Supercharged Proteins

The enzymatic microenvironment can impact biocatalytic activity; however, these effects can be difficult to investigate as mutations and fusions can introduce multiple variables and overlapping effects. The fusion of a supercharged protein is a potentially facile means to alter the enzymatic microenvironment. We have investigated complexes made between a thermostable alcohol dehydrogenase (AdhD) and superfolding green fluorescent protein (sfGFP) mutants with extreme surface charges. Three charged sfGFP variants, -30, 0, and +36 were covalently attached to AdhD through the SpyCatcher/SpyTag system. Specific rates for the NAD⁺ -dependent oxidation of butane-2,3-diol were significantly increased in the -30 sfGFP complex, a mixed effect was seen for the 0 sfGFP complexes, and the rates were unaffected by +36 sfGFP complexation. Reactions performed at various pH values (7.8-9.8) and salt concentrations (7.75-500 mm) showed that there was a complex interplay between these effects that was consistent with fusion proteins affecting the local ionic strength, as opposed to the local pH. Steady-state kinetic analyses were performed with the -30 and 0 AdhD-sfGFP complexes. The overall catalytic efficiency was dependent on the charge of the fused sfGFP variant; the -30 sfGFP fusions exhibited the largest beneficial effects at pH 8.8. The impact of the fusions on the apparent ionic strength provides further insight into the effects of charged patches observed on metabolon-forming enzyme complexes.

Biotechnology of extremely thermophilic archaea

Although the extremely thermophilic archaea (Topt ≥ 70°C) may be the most primitive extant forms of life, they have been studied to a limited extent relative to mesophilic microorganisms. Many of these organisms have unique biochemical and physiological characteristics with important biotechnological implications. These include methanogens that generate methane, fermentative anaerobes that produce hydrogen gas with high efficiency, and acidophiles that can mobilize base, precious and strategic metals from mineral ores. Extremely thermophilic archaea have also been a valuable source of thermoactive, thermostable biocatalysts, but their use as cellular systems has been limited because of the general lack of facile genetics tools. This situation has changed recently, however, thereby providing an important avenue for understanding their metabolic and physiological details and also opening up opportunities for metabolic engineering efforts. Along these lines, extremely thermophilic archaea have recently been engineered to produce a variety of alcohols and industrial chemicals, in some cases incorporating CO2 into the final product. There are barriers and challenges to these organisms reaching their full potential as industrial microorganisms but, if these can be overcome, a new dimension for biotechnology will be forthcoming that strategically exploits biology at high temperatures.

Engineered Biomolecular Recognition of RDX by Using a Thermostable Alcohol Dehydrogenase as a Protein Scaffold

There are many biotechnology applications that would benefit from simple, stable proteins with engineered biomolecular recognition. Here, we explored the hypothesis that a thermostable alcohol dehydrogenase (AdhD from Pyrococcus furiosus) could be engineered to bind a small molecule instead of a cofactor or molecules involved in the catalytic transition state. We chose the explosive molecule 1,3,5-trinitro-1,3,5-triazine (royal demolition explosive, RDX) as a proof-of-concept. Its low solubility in water was exploited for immobilization for biopanning by using ribosome display. Docking simulations were used to identify two potential binding sites in AdhD, and a randomized library focused on tyrosine or serine mutations was used to determine that RDX was binding in the substrate binding pocket of the enzyme. A fully randomized binding pocket library was selected, and affinity maturation by error-prone PCR led to the identification of a mutant (EP-16) that gained the ability to bind RDX with an affinity of (73±11) μm. These results underscore the way in which thermostable enzymes can be useful scaffolds for expanding the biomolecular recognition toolbox.

Pcal_1311, an alcohol dehydrogenase homologue from Pyrobaculum calidifontis, displays NADH-dependent high aldehyde reductase activity

Genome sequence of Pyrobaculum calidifontis, a hyperthermophilic archaeon, harbors three open-reading frames annotated as alcohol dehydrogenases. One of them, Pcal_1311, does not display a significantly high homology with any of the characterized alcohol dehydrogenases. Highest homology of 38% was found with the characterized counterpart from Geobacillus stearothermophilus. To examine the biochemical properties of Pcal_1311, we have cloned and functionally expressed the gene in Escherichia coli. Purified recombinant Pcal_1311 catalyzed the NAD(H)-dependent oxidation of various alcohols and reduction of aldehydes, with a marked preference for substrates with functional group at the terminal carbon. Highest activity for the oxidation reaction (3 μmol min^-1 mg^-1) was found with 1,4-butanediol and for the reduction reaction (150 μmol min^-1 mg^-1) with glutaraldehyde. Both the oxidation and reduction activities increased with the increase in temperature up to 80 °C. Recombinant Pcal_1311 was highly stable and retained more than 90% activity even after incubation of 180 min at 90 °C. In addition to the thermostabilty, Pcal_1311 was highly stable in the presence of known denaturants including urea and guanidine hydrochloride. The high stability, particularly thermostability, and the NADH-dependent aldehyde reduction activity make Pcal_1311 a unique member in the alcohol dehydrogenase family.

Block V RTX Domain of Adenylate Cyclase from Bordetella pertussis: A Conformationally Dynamic Scaffold for Protein Engineering Applications

The isolated Block V repeats-in-toxin (RTX) peptide domain of adenylate cyclase (CyaA) from Bordetella pertussis reversibly folds into a β-roll secondary structure upon calcium binding. In this review, we discuss how the conformationally dynamic nature of the peptide is being engineered and employed as a switching mechanism to mediate different protein functions and protein-protein interactions. The peptide has been used as a scaffold for diverse applications including: a precipitation tag for bioseparations, a cross-linking domain for protein hydrogel formation and as an alternative scaffold for biomolecular recognition applications. Proteins and peptides such as the RTX domains that exhibit natural stimulus-responsive behavior are valuable building blocks for emerging synthetic biology applications.

(R,R)-Butane-2,3-diol dehydrogenase from Bacillus clausii DSM 8716T: Cloning and expression of the bdhA-gene, and initial characterization of enzyme

The gene encoding a putative (R,R)-butane-2,3-diol dehydrogenase (bdhA) from Bacillus clausii DSM 8716^T was isolated, sequenced and expressed in Escherichia coli. The amino acid sequence of the encoded protein is only distantly related to previously studied enzymes (identity 33-43%) and exhibited some uncharted peculiarities. An N-terminally StrepII-tagged enzyme variant was purified and initially characterized. The isolated enzyme catalyzed the (R)-specific oxidation of (R,R)- and meso-butane-2,3-diol to (R)- and (S)-acetoin with specific activities of 12U/mg and 23U/mg, respectively. Likewise, racemic acetoin was reduced with a specific activity of up to 115U/mg yielding a mixture of (R,R)- and meso-butane-2,3-diol, while the enzyme reduced butane-2,3-dione (V_max 74U/mg) solely to (R,R)-butane-2,3-diol via (R)-acetoin. For these reactions only activity with the co-substrates NADH/NAD⁺ was observed. The enzyme accepted a selection of vicinal diketones, α-hydroxy ketones and vicinal diols as alternative substrates. Although the physiological function of the enzyme in B. clausii remains elusive, the data presented herein clearly demonstrates that the encoded enzyme is a genuine (R,R)-butane-2,3-diol dehydrogenase with potential for applications in biocatalysis and sensor development.

Engineering the cofactor specificity of an alcohol dehydrogenase via single mutations or insertions distal to the 2'-phosphate group of NADP(H)

There have been many reports exploring the engineering of the cofactor specificity of aldo-keto reductases (AKRs), as this class of proteins is ubiquitous and exhibits many useful activities. A common approach is the mutagenesis of amino acids involved in interactions with the 2'-phosphate group of NADP(H) in the cofactor binding pocket. We recently performed a 'loop-grafting' approach to engineer the substrate specificity of the thermostable alcohol dehydrogenase D (AdhD) from Pyrococcus furiosus and we found that a loop insertion after residue 211, which is on the back side of the cofactor binding pocket, could also alter cofactor specificity. Here, we further explore this approach by introducing single point mutations and single amino acid insertions at the loop insertion site. Six different mutants of AdhD were created by either converting glycine 211 to cysteine or serine or by inserting alanine, serine, glycine or cysteine between the 211 and 212 residues. Several mutants gained activity with NADP+ above the wild-type enzyme. And remarkably, it was found that all of the mutants investigated resulted in some degree of reversal of cofactor specificity in the oxidative direction. These changes were generally a result of changes in conformations of the ternary enzyme/cofactor/substrate complexes as opposed to changes in affinities or binding energies of the cofactors. This study highlights the role that amino acids which are distal to the cofactor binding pocket but are involved in substrate interactions can influence cofactor specificity in AdhD, and this strategy should translate to other AKR family members.

Glutathione-Dependent Formaldehyde Dehydrogenase Homolog from Bacillus subtilis Strain R5 is a Propanol-Preferring Alcohol Dehydrogenase

Genome search of Bacillus subtilis revealed the presence of an open reading frame annotated as glutathione-dependent formaldehyde dehydrogenase/alcohol dehydrogenase. The open reading frame consists of 1137 nucleotides corresponding to a polypeptide of 378 amino acids. To examine whether the encoded protein is glutathione-dependent formaldehyde dehydrogenase or alcohol dehydrogenase, we cloned and characterized the gene product. Enzyme activity assays revealed that the enzyme exhibits a metal ion-dependent alcohol dehydrogenase activity but no glutathione-dependent formaldehyde dehydrogenase or aldehyde dismutase activity. Although the protein is of mesophilic origin, optimal temperature for the enzyme activity is 60°C. Thermostability analysis by circular dichroism spectroscopy revealed that the protein is stable up to 60°C. Presence or absence of metal ions in the reaction mixture did not affect the enzyme activity. However, metal ions were necessary at the time of protein production and folding. There was a marked difference in the enzyme activity and CD spectra of the proteins produced in the presence and absence of metal ions. The experimental results obtained in this study demonstrate that the enzyme is a bona-fide alcohol dehydrogenase and not a glutathione-dependent formaldehyde dehydrogenase.

Identification and Molecular Characterization of Genes Coding Pharmaceutically Important Enzymes from Halo-Thermo Tolerant Bacillus

Purpose: Robust pharmaceutical and industrial enzymes from extremophile microorganisms are main source of enzymes with tremendous stability under harsh conditions which make them potential tools for commercial and biotechnological applications. Methods: The genome of a Gram-positive halo-thermotolerant Bacillus sp. SL1, new isolate from Saline Lake, was investigated for the presence of genes coding for potentially pharmaceutical enzymes. We determined gene sequences for the enzymes laccase (CotA), l-asparaginase (ansA3, ansA1), glutamate-specific endopeptidase (blaSE), l-arabinose isomerase (araA2), endo-1,4-β mannosidase (gmuG), glutaminase (glsA), pectate lyase (pelA), cellulase (bglC1), aldehyde dehydrogenase (ycbD) and allantoinases (pucH) in the genome of Bacillus sp. SL1. Results: Based on the DNA sequence alignment results, six of the studied enzymes of Bacillus sp. SL-1 showed 100% similarity at the nucleotide level to the same genes of B. licheniformis 14580 demonstrating extensive organizational relationship between these two strains. Despite high similarities between the B. licheniformis and Bacillus sp. SL-1 genomes, there are minor differences in the sequences of some enzyme. Approximately 30% of the enzyme sequences revealed more than 99% identity with some variations in nucleotides leading to amino acid substitution in protein sequences. Conclusion: Molecular characterization of this new isolate provides useful information regarding evolutionary relationship between B. subtilis and B. licheniformis species. Since, the most industrial processes are often performed in harsh conditions, enzymes from such halo-thermotolerant bacteria may provide economically and industrially appealing biocatalysts to be used under specific physicochemical situations in medical, pharmaceutical, chemical and other industries.

Extreme makeover: Engineering the activity of a thermostable alcohol dehydrogenase (AdhD) from Pyrococcus furiosus

Alcohol dehydrogenase D (AdhD) is a monomeric thermostable alcohol dehydrogenase from the aldo-keto reductase (AKR) superfamily of proteins. We have been exploring various strategies of engineering the activity of AdhD so that it could be employed in future biotechnology applications. Driven by insights made in other AKRs, we have made mutations in the cofactor-binding pocket of the enzyme and broadened its cofactor specificity. A pre-steady state kinetic analysis yielded new insights into the conformational behavior of this enzyme. The most active mutant enzyme concomitantly gained activity with a non-native cofactor, nicotinamide mononucleotide, NMN(H), and an enzymatic biofuel cell was demonstrated with this enzyme/cofactor pair. Substrate specificity was altered by grafting loop regions near the active site pocket from a mesostable human aldose reductase (hAR) onto the thermostable AdhD. These moves not only transferred the substrate specificity of hAR but also the cofactor specificity of hAR. We have added alpha-helical appendages to AdhD to enable it to self-assemble into a thermostable catalytic proteinaceous hydrogel. As our understanding of the structure/function relationship in AdhD and other AKRs advances, this ubiquitous protein scaffold could be engineered for a variety of catalytic activities that will be useful for many future applications.

Molecular and biochemical characterization of bifunctional pyruvate decarboxylases and pyruvate ferredoxin oxidoreductases from Thermotoga maritima and Thermotoga hypogea

Hyperthermophilic bacteria Thermotoga maritima and Thermotoga hypogea produce ethanol as a metabolic end product, which is resulted from acetaldehyde reduction catalysed by an alcohol dehydrogenase (ADH). However, the enzyme that is involved in the production of acetaldehyde from pyruvate is not well characterized. An oxygen sensitive and coenzyme A-dependent pyruvate decarboxylase (PDC) activity was found to be present in cell free extracts of T. maritima and T. hypogea. Both enzymes were purified and found to have pyruvate ferredoxin oxidoreductase (POR) activity, indicating their bifunctionality. Both PDC and POR activities from each of the purified enzymes were characterized in regards to their optimal assay conditions including pH dependency, oxygen sensitivity, thermal stability, temperature dependency and kinetic parameters. The close relatedness of the PORs that was shown by sequence analysis could be an indication of the presence of such bifunctionality in other hyperthermophilic bacteria. This is the first report of a bifunctional PDC/POR enzyme in hyperthermophilic bacteria. The PDC and the previously reported ADHs are most likely the key enzymes catalysing the production of ethanol from pyruvate in bacterial hyperthermophiles.

Promiscuous activity of (S,S)-butanediol dehydrogenase is responsible for glycerol production from 1,3-dihydroxyacetone in Corynebacterium glutamicum under oxygen-deprived conditions

Corynebacterium glutamicum can consume glucose to excrete glycerol under oxygen deprivation. Although glycerol synthesis from 1,3-dihydroxyacetone (DHA) has been speculated, no direct evidence has yet been provided in C. glutamicum. Enzymatic and genetic investigations here indicate that the glycerol is largely produced from DHA and, unexpectedly, the reaction is catalyzed by (S,S)-butanediol dehydrogenase (ButA) that inherently catalyzes the interconversion between S-acetoin and (S,S)-2,3-butanediol. Consequently, the following pathway for glycerol biosynthesis in the bacterium emerges: dihydroxyacetone phosphate is dephosphorylated by HdpA to DHA, which is subsequently reduced to glycerol by ButA. This study emphasizes the importance of promiscuous activity of the enzyme in vivo.

Characterization and identification of three novel aldo-keto reductases from Lodderomyces elongisporus for reducing ethyl 4-chloroacetoacetate

Lodderomyces elongisporus LH703 isolated from soil samples contained three novel aldo-keto reductases (AKRs) (LEAKR 48, LEAKR 49, and LEAKR 50). The three enzymes were cloned, expressed, and purified to homogeneity for characterization. These three AKRs shared <40% amino acid identity with each other. LEAKR 50 was identified as a member of AKR3 family, whereas the other two LEAKRs were identified as members of two novel AKR families, respectively. All the three AKRs required nicotinamide adenine dinucleotide phosphate as a cofactor. However, they showed diverse characteristics, including optimum catalyzing conditions, resistance to adverse reaction conditions, and substrate specificity. LEAKR 50 was estimated to be a promising biocatalyst that could reduce ethyl 4-chloroacetoacetate with high enantiomeric excess (98% e. e.) and high activity residue under adverse conditions.

Efficient whole-cell biocatalyst for acetoin production with NAD+ regeneration system through homologous co-expression of 2,3-butanediol dehydrogenase and NADH oxidase in engineered Bacillus subtilis

Acetoin (3-hydroxy-2-butanone), an extensively-used food spice and bio-based platform chemical, is usually produced by chemical synthesis methods. With increasingly requirement of food security and environmental protection, bio-fermentation of acetoin by microorganisms has a great promising market. However, through metabolic engineering strategies, the mixed acid-butanediol fermentation metabolizes a certain portion of substrate to the by-products of organic acids such as lactic acid and acetic acid, which causes energy cost and increases the difficulty of product purification in downstream processes. In this work, due to the high efficiency of enzymatic reaction and excellent selectivity, a strategy for efficiently converting 2,3-butandiol to acetoin using whole-cell biocatalyst by engineered Bacillus subtilis is proposed. In this process, NAD⁺ plays a significant role on 2,3-butanediol and acetoin distribution, so the NADH oxidase and 2,3-butanediol dehydrogenase both from B. subtilis are co-expressed in B. subtilis 168 to construct an NAD⁺ regeneration system, which forces dramatic decrease of the intracellular NADH concentration (1.6 fold) and NADH/NAD⁺ ratio (2.2 fold). By optimization of the enzymatic reaction and applying repeated batch conversion, the whole-cell biocatalyst efficiently produced 91.8 g/L acetoin with a productivity of 2.30 g/(L·h), which was the highest record ever reported by biocatalysis. This work indicated that manipulation of the intracellular cofactor levels was more effective than the strategy of enhancing enzyme activity, and the bioprocess for NAD⁺ regeneration may also be a useful way for improving the productivity of NAD⁺-dependent chemistry-based products.

Two-stage pH control strategy based on the pH preference of acetoin reductase regulates acetoin and 2,3-butanediol distribution in Bacillus subtilis

Acetoin reductase/2,3-butanediol dehydrogenase (AR/BDH), which catalyzes the interconversion between acetoin and 2,3-butanediol, plays an important role in distribution of the products pools. This work characterized the Bacillus subtilis AR/BDH for the first time. The enzyme showed very different pH preferences of pH 6.5 for reduction and pH 8.5 for oxidation. Based on these above results, a two-stage pH control strategy was optimized for acetoin production, in which the pH was controlled at 6.5 for quickly converting glucose to acetoin and 2,3-butanediol, and then 8.0 for reversely transforming 2,3-butanediol to acetoin. By over-expression of AR/BDH in the wild-type B. subtilis JNA 3-10 and applying fed-batch fermentation based on the two-stage pH control strategy, acetoin yield of B. subtilis was improved to a new record of 73.6 g/l, with the productivity of 0.77 g/(l·h). The molar yield of acetoin was improved from 57.5% to 83.5% and the ratio of acetoin/2,3-butanediol was switched from 2.7∶1 to 18.0∶1.

Decarboxylation of pyruvate to acetaldehyde for ethanol production by hyperthermophiles

Pyruvate decarboxylase (PDC encoded by pdc) is a thiamine pyrophosphate (TPP)-containing enzyme responsible for the conversion of pyruvate to acetaldehyde in many mesophilic organisms. However, no pdc/PDC homolog has yet been found in fully sequenced genomes and proteomes of hyper/thermophiles. The only PDC activity reported in hyperthermophiles was a bifunctional, TPP- and CoA-dependent pyruvate ferredoxin oxidoreductase (POR)/PDC enzyme from the hyperthermophilic archaeon Pyrococcus furiosus. Another enzyme known to be involved in catalysis of acetaldehyde production from pyruvate is CoA-acetylating acetaldehyde dehydrogenase (AcDH encoded by mhpF and adhE). Pyruvate is oxidized into acetyl-CoA by either POR or pyruvate formate lyase (PFL), and AcDH catalyzes the reduction of acetyl-CoA to acetaldehyde in mesophilic organisms. AcDH is present in some mesophilic (such as clostridia) and thermophilic bacteria (e.g., Geobacillus and Thermoanaerobacter). However, no AcDH gene or protein homologs could be found in the released genomes and proteomes of hyperthermophiles. Moreover, no such activity was detectable from the cell-free extracts of different hyperthermophiles under different assay conditions. In conclusion, no commonly-known PDCs was found in hyperthermophiles. Instead of the commonly-known PDC, it appears that at least one multifunctional enzyme is responsible for catalyzing the non-oxidative decarboxylation of pyruvate to acetaldehyde in hyperthermophiles.

Thermostable alcohol dehydrogenase from Thermococcus kodakarensis KOD1 for enantioselective bioconversion of aromatic secondary alcohols

A novel thermostable alcohol dehydrogenase (ADH) showing activity toward aromatic secondary alcohols was identified from the hyperthermophilic archaeon Thermococcus kodakarensis KOD1 (TkADH). The gene, tk0845, which encodes an aldo-keto reductase, was heterologously expressed in Escherichia coli. The enzyme was found to be a monomer with a molecular mass of 31 kDa. It was highly thermostable with an optimal temperature of 90°C and a half-life of 4.5 h at 95°C. The apparent K(m) values for the cofactors NAD(P)(+) and NADPH were similar within a range of 66 to 127 μM. TkADH preferred secondary alcohols and accepted various ketones and aldehydes as substrates. Interestingly, the enzyme could oxidize 1-phenylethanol and its derivatives having substituents at the meta and para positions with high enantioselectivity, yielding the corresponding (R)-alcohols with optical purities of greater than 99.8% enantiomeric excess (ee). TkADH could also reduce 2,2,2-trifluoroacetophenone to (R)-2,2,2-trifluoro-1-phenylethanol with high enantioselectivity (>99.6% ee). Furthermore, the enzyme showed high resistance to organic solvents and was particularly highly active in the presence of H2O-20% 2-propanol and H2O-50% n-hexane or n-octane. This ADH is expected to be a useful tool for the production of aromatic chiral alcohols.

Characterization of an aldo-keto reductase from Thermotoga maritima with high thermostability and a broad substrate spectrum

A novel aldo-keto reductase gene, Tm1743, from Thermotoga maritima was overexpressed in Escherichia coli. The enzyme displayed the highest activity at 90 °C and at pH 9. It retained 63 % of its activity after 15 h at 85 °C. The enzyme also could tolerate (up to 10 % v/v) acetonitrile, ethanol and 2-propanol with slightly increased activities. Methanol, DMSO and acetone decreased activity slightly. Furthermore, Tm1743 exhibited broad substrate specificity towards various keto esters, ketones and aldehydes, with relative activities ranging from 2 to 460 % compared to the control. Its optimum substrate, 2,2,2-trifluoroacetophenone, was asymmetrically reduced in a coupled NADPH-regeneration system with an enantioselectivity of 99.8 % and a conversion of 98 %.

Modular exchange of substrate-binding loops alters both substrate and cofactor specificity in a member of the aldo-keto reductase superfamily

Substrate specificity in the aldo-keto reductase (AKR) superfamily is determined by three mobile loops positioned at the top of the canonical (α/β)(8)-barrel structure. These loops have previously been demonstrated to be modular in a well-studied class of AKRs, in that exchanging loops between two similar hydroxysteroid dehydrogenases resulted in a complete alteration of substrate specificity (Ma,H. and Penning,T.M. (1999) Proc. Natl Acad. Sci. USA, 96, 11161-11166). Here, we further examine the modularity of these loops by grafting those from human aldose reductase (hAR) into the hyperthermostable AKR, alcohol dehydrogenase D (AdhD), from Pyrococcus furiosus. Replacement of Loops A and B was sufficient to impart hAR activity into AdhD, and the resulting chimera retained the thermostability of the parent enzyme. However, no active chimeras were observed when the hAR loops were grafted into a previously engineered cofactor specificity mutant of AdhD, which displayed similar kinetics to hAR with the model substrate dl-glyceraldehyde. The non-additivity of these mutations suggests that efficient turnover is more dependent on the relative positioning of the cofactor and substrate in the active site than on binding of the individual species. The ability to impart the substrate specificities of mesostable AKRs into a thermostable scaffold will be useful in a variety of applications including immobilized enzyme systems for bioelectrocatalysis and fine chemical synthesis.

Multifunctional materials through modular protein engineering

The diversity of potential applications for protein-engineered materials has undergone profound recent expansion through a rapid increase in the library of domains that have been utilized in these materials. Historically, protein-engineered biomaterials have been generated from a handful of peptides that were selected and exploited for their naturally evolved functionalities. In recent years, the scope of the field has drastically expanded to include peptide domains that were designed through computational modeling, identified through high-throughput screening, or repurposed from wild type domains to perform functions distinct from their primary native applications. The strategy of exploiting a diverse library of peptide domains to design modular block copolymers enables the synthesis of multifunctional protein-engineered materials with a range of customizable properties and activities. As the diversity of peptide domains utilized in modular protein engineering continues to expand, a tremendous and ever-growing combinatorial expanse of material functionalities will result.

Nanoreactors by programmed enzyme encapsulation inside the capsid of the bacteriophage P22

The virus like particle (VLP) derived from bacteriophage P22 presents a unique platform for constructing catalytically functional nanomaterials by encapsulation of enzymes into its interior. Encapsulation has been engineered to be genetically programmed allowing "one pot" synthesis and incorporation of desired enzymes. The unique characteristic that separates P22 from other VLP systems is the ability to modulate the overall volume and porosity of the VLP structure, thus controlling substrate access to the encapsulated enzyme. The present study demonstrates incorporation of an enzyme, alcohol dehydrogenase D, with the highest internal loading for an active enzyme by any VLP described thus far. In addition, we show that not only does encapsulating AdhD inside P22 affect its kinetic parameters in comparison with the "free" enzyme, but transformation of P22 to different morphological states, which changes the internal volume of the VLP, yields changes in the overall activity of the encapsulated enzyme as well. The findings reported here clearly illustrate that P22 holds potential for synthetic approaches to create nanoreactors, by design, using the power of highly evolved enzymes for chemical transformations.

Effect of thermal stability on protein adsorption to silica using homologous aldo-keto reductases

Gaining more insight into the mechanisms governing the behavior of proteins at solid/liquid interfaces is particularly relevant in the interaction of high-value biologics with storage and delivery device surfaces, where adsorption-induced conformational changes may dramatically affect biocompatibility. The impact of structural stability on interfacial behavior has been previously investigated by engineering nonwild-type stability mutants. Potential shortcomings of such approaches include only modest changes in thermostability, and the introduction of changes in the topology of the proteins when disulfide bonds are incorporated. Here we employ two members of the aldo-keto reductase superfamily (alcohol dehydrogenase, AdhD and human aldose reductase, hAR) to gain a new perspective on the role of naturally occurring thermostability on adsorbed protein arrangement and its subsequent impact on desorption. Unexpectedly, we find that during initial adsorption events, both proteins have similar affinity to the substrate and undergo nearly identical levels of structural perturbation. Interesting differences between AdhD and hAR occur during desorption and both proteins exhibit some level of activity loss and irreversible conformational change upon desorption. Although such surface-induced denaturation is expected for the less stable hAR, it is remarkable that the extremely thermostable AdhD is similarly affected by adsorption-induced events. These results question the role of thermal stability as a predictor of protein adsorption/desorption behavior.

Characterization of a zinc-containing alcohol dehydrogenase with stereoselectivity from the hyperthermophilic archaeon Thermococcus guaymasensis

An alcohol dehydrogenase (ADH) from hyperthermophilic archaeon Thermococcus guaymasensis was purified to homogeneity and was found to be a homotetramer with a subunit size of 40 ± 1 kDa. The gene encoding the enzyme was cloned and sequenced; this gene had 1,095 bp, corresponding to 365 amino acids, and showed high sequence homology to zinc-containing ADHs and l-threonine dehydrogenases with binding motifs of catalytic zinc and NADP(+). Metal analyses revealed that this NADP(+)-dependent enzyme contained 0.9 ± 0.03 g-atoms of zinc per subunit. It was a primary-secondary ADH and exhibited a substrate preference for secondary alcohols and corresponding ketones. Particularly, the enzyme with unusual stereoselectivity catalyzed an anti-Prelog reduction of racemic (R/S)-acetoin to (2R,3R)-2,3-butanediol and meso-2,3-butanediol. The optimal pH values for the oxidation and formation of alcohols were 10.5 and 7.5, respectively. Besides being hyperthermostable, the enzyme activity increased as the temperature was elevated up to 95°C. The enzyme was active in the presence of methanol up to 40% (vol/vol) in the assay mixture. The reduction of ketones underwent high efficiency by coupling with excess isopropanol to regenerate NADPH. The kinetic parameters of the enzyme showed that the apparent K(m) values and catalytic efficiency for NADPH were 40 times lower and 5 times higher than those for NADP(+), respectively. The physiological roles of the enzyme were proposed to be in the formation of alcohols such as ethanol or acetoin concomitant to the NADPH oxidation.

Broadening the cofactor specificity of a thermostable alcohol dehydrogenase using rational protein design introduces novel kinetic transient behavior

Cofactor specificity in the aldo-keto reductase (AKR) superfamily has been well studied, and several groups have reported the rational alteration of cofactor specificity in these enzymes. Although most efforts have focused on mesostable AKRs, several putative AKRs have recently been identified from hyperthermophiles. The few that have been characterized exhibit a strong preference for NAD(H) as a cofactor, in contrast to the NADP(H) preference of the mesophilic AKRs. Using the design rules elucidated from mesostable AKRs, we introduced two site-directed mutations in the cofactor binding pocket to investigate cofactor specificity in a thermostable AKR, AdhD, which is an alcohol dehydrogenase from Pyrococcus furiosus. The resulting double mutant exhibited significantly improved activity and broadened cofactor specificity as compared to the wild-type. Results of previous pre-steady-state kinetic experiments suggest that the high affinity of the mesostable AKRs for NADP(H) stems from a conformational change upon cofactor binding which is mediated by interactions between a canonical arginine and the 2'-phosphate of the cofactor. Pre-steady-state kinetics with AdhD and the new mutants show a rich conformational behavior that is independent of the canonical arginine or the 2'-phosphate. Additionally, experiments with the highly active double mutant using NADPH as a cofactor demonstrate an unprecedented transient behavior where the binding mechanism appears to be dependent on cofactor concentration. These results suggest that the structural features involved in cofactor specificity in the AKRs are conserved within the superfamily, but the dynamic interactions of the enzyme with cofactors are unexpectedly complex.