Site-directed amino acid substitutions in the hydroxylase alpha subunit of butane monooxygenase from Pseudomonas butanovora: Implications for substrates knocking at the gate

Methane biodegradation and enhanced methane solubilization by the filamentous fungi Fusarium solani

Methane is one of the most important greenhouse gases emitted from natural and human activities. It is scarcely soluble in water; thus, it has a low bioavailability for microorganisms able to degrade it. In this work, the capacity of the fungus Fusarium solani to improve the solubility of methane in water and to biodegrade methane was assayed. Experiments were performed in microcosms with vermiculite as solid support and mineral media, at temperatures between 20 and 35 °C and water activities between 0.9 and 0.95, using pure cultures of F. solani and a methanotrophic consortium (Methylomicrobium album and Methylocystis sp) as a control. Methane was the only carbon and energy source. Results indicate that using thermally inactivated biomass of F. solani, decreases the partition coefficient of methane in water up to two orders of magnitude. Moreover, F. solani can degrade methane, in fact at 35 °C and the highest water activity, the methane degradation rate attained by F. solani was 300 mg m^-3 h^-1, identical to the biodegradation rate achieved by the consortium of methanotrophic bacteria.

Tailoring a Soluble Diiron Monooxygenase for Synthesis of Aromatic N-oxides

The aromatic N-oxides have received increased attention over the last few years due to their potential application in medicine, agriculture and organic chemistry. As a green alternative in their synthesis, the biocatalytic method employing whole cells of Escherichia coli bearing phenol monooxygenase like protein PmlABCDEF (from here on – PML monooxygenase) has been introduced. In this work, site-directed mutagenesis was used to study the contributions of active site neighboring residues I106, A113, G109, F181, F200, F209 to the regiospecificity of N-oxidation. Based on chromogenic indole oxidation screening, a collection of PML mutants with altered catalytic properties was created. Among the tested mutants, the A113G variant acquired the most distinguishable N-oxidations capacity. This new variant of PML was able to produce dioxides (quinoxaline-1,4-dioxide, 2,5-dimethylpyrazine-1,4-dioxide) and specific mono-N-oxides (2,3,5-trimethylpyrazine-1-oxide) that were unachievable using the wild type PML. This mutant also featured reshaped regioselectivity as N-oxidation shifted towards quinazoline-1-oxide compared to quinazoline-3-oxide that is produced by the wild type PML.

Novel Butane-Oxidizing Bacteria and Diversity of bmoX Genes in Puguang Gas Field

To investigate the diversity of butane-oxidizing bacteria in soils contaminated by long-term light hydrocarbon microseepage and the influence of butane on the soil microbial community, a quantitative study and identification of butane-oxidizing bacteria (BOB) in soils at the Puguang gas field were performed by DNA-based stable isotope probing (DNA-SIP). For the first time, two phylotypes corresponding to the genera Giesbergeria and Ramlibacter were identified as being directly involved in butane oxidation, in addition to the well-known light hydrocarbon degrader Pseudomonas. Furthermore, bmoX genes were strongly labeled by ¹³C-butane, and their abundances in gas field soils increased by 43.14-, 17.39-, 21.74-, and 30.14-fold when incubated with butane for 6, 9, 12, and 14 days, respectively, indicating that these bmoX-harboring bacteria could use butane as the sole carbon and energy source and they play an important role in butane degradation. We also found that the addition of butane rapidly shaped the bacterial community and reduced the diversity of bmoX genes in the gas field soils. These findings improve our understanding of BOB in the gas field environment and reveal the potential for their applications in petroleum exploration and bioremediation.

Substrate tunnels in enzymes: structure-function relationships and computational methodology

In enzymes, the active site is the location where incoming substrates are chemically converted to products. In some enzymes, this site is deeply buried within the core of the protein, and, in order to access the active site, substrates must pass through the body of the protein via a tunnel. In many systems, these tunnels act as filters and have been found to influence both substrate specificity and catalytic mechanism. Identifying and understanding how these tunnels exert such control has been of growing interest over the past several years because of implications in fields such as protein engineering and drug design. This growing interest has spurred the development of several computational methods to identify and analyze tunnels and how ligands migrate through these tunnels. The goal of this review is to outline how tunnels influence substrate specificity and catalytic efficiency in enzymes with buried active sites and to provide a brief summary of the computational tools used to identify and evaluate these tunnels.

Structural insights into diversity and n-alkane biodegradation mechanisms of alkane hydroxylases

Environmental microbes utilize four degradation pathways for the oxidation of n-alkanes. Although the enzymes degrading n-alkanes in different microbes may vary, enzymes functioning in the first step in the aerobic degradation of alkanes all belong to the alkane hydroxylases. Alkane hydroxylases are a class of enzymes that insert oxygen atoms derived from molecular oxygen into different sites of the alkane terminus (or termini) depending on the type of enzymes. In this review, we summarize the different types of alkane hydroxylases, their degrading steps, and compare typical enzymes from various classes with regard to their three-dimensional structures, in order to provide insights into how the enzymes mediate their different roles in the degradation of n-alkanes and what determines their different substrate ranges. Through the above analyzes, the degrading mechanisms of enzymes can be elucidated and molecular biological methods can be utilized to expand their catalytic roles in the petrochemical industry or in bioremediation of oil-contaminated environments.

Evidence for different contributions of archaea and bacteria to the ammonia-oxidizing potential of diverse Oregon soils

A method was developed to determine the contributions of ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) to the nitrification potentials (NPs) of soils taken from forest, pasture, cropped, and fallowed (19 years) lands. Soil slurries were exposed to acetylene to irreversibly inactivate ammonia monooxygenase, and upon the removal of acetylene, the recovery of nitrification potential (RNP) was monitored in the presence and absence of bacterial or eukaryotic protein synthesis inhibitors. For unknown reasons, and despite measureable NPs, RNP did not occur consistently in forest soil samples; however, pasture, cropped, and fallowed soil RNPs commenced after lags that ranged from 12 to 30 h after acetylene removal. Cropped soil RNP was completely prevented by the bacterial protein synthesis inhibitor kanamycin (800 μg/ml), whereas a combination of kanamycin plus gentamicin (800 μg/ml each) only partially prevented the RNP (60%) of fallowed soils. Pasture soil RNP was completely insensitive to either kanamycin, gentamicin, or a combination of the two. Unlike cropped soil, pasture and fallowed soil RNPs occurred at both 30°C and 40°C and without supplemental NH(4)(+) (≤ 10 μM NH(4)(+) in solution), and pasture soil RNP demonstrated ∼ 50% insensitivity to 100 μM allyl thiourea (ATU). In addition, fallowed and pasture soil RNPs were insensitive to the fungal inhibitors nystatin and azoxystrobin. This combination of properties suggests that neither fungi nor AOB contributed to pasture soil RNP and that AOA were responsible for the RNP of the pasture soils. Both AOA and AOB may contribute to RNP in fallowed soil, while RNP in cropped soils was dominated by AOB.

Growth of a non-methanotroph on natural gas: ignoring the obvious to focus on the obscure

Methanotrophs are well known for their ability to grow on methane in natural gas environments; however, these environments also contain low concentrations of longer-chain-length gaseous alkanes. This mixture of alkanes poses a problem for organisms that might otherwise grow on alkanes ≥ C2 because methane could inhibit oxidation of growth substrates and lead to an accumulation of toxic C1 metabolites. Here, we have characterized the growth of a C2 -C9 alkane-utilizing bacterium, Thauera butanivorans, in conditions containing high concentrations of methane and small amounts (< 3% of total alkane) of C2 -C4 . During such growth, methanol accumulates transiently before being consumed in an O2 -dependent process that leads to the formation of a proton gradient and subsequent ATP generation. In contrast, formaldehyde-dependent O2 consumption is insensitive to uncouplers and does not lead to significant ATP production. This efficient C1 oxidation process that regains much of the energy loss inflicted by oxidizing methane, coupled with an alkane monooxygenase effective at limiting methane oxidation, allows T. butanivorans to grow uninhibited in natural gas environments. Although longer-chain-length gaseous alkane-utilizing organisms have been previously identified to grow in natural gas seepages, the data presented here represent the first detailed characterization of the physiological effects associated with inadvertent methane oxidation by a non-methanotroph, and suggest the presence of a well-evolved series of biochemical processes that allow them to grow in natural gas deposits without the need for developing the unique metabolic machinery characteristic of methanotrophs.

Kinetic characterization of the soluble butane monooxygenase from Thauera butanivorans, formerly 'Pseudomonas butanovora'

Soluble butane monooxygenase (sBMO), a three-component di-iron monooxygenase complex expressed by the C(2)-C(9) alkane-utilizing bacterium Thauera butanivorans, was kinetically characterized by measuring substrate specificities for C(1)-C(5) alkanes and product inhibition profiles. sBMO has high sequence homology with soluble methane monooxygenase (sMMO) and shares a similar substrate range, including gaseous and liquid alkanes, aromatics, alkenes and halogenated xenobiotics. Results indicated that butane was the preferred substrate (defined by k(cat) : K(m) ratios). Relative rates of oxidation for C(1)-C(5) alkanes differed minimally, implying that substrate specificity is heavily influenced by differences in substrate K(m) values. The low micromolar K(m) for linear C(2)-C(5) alkanes and the millimolar K(m) for methane demonstrate that sBMO is two to three orders of magnitude more specific for physiologically relevant substrates of T. butanivorans. Methanol, the product of methane oxidation and also a substrate itself, was found to have similar K(m) and k(cat) values to those of methane. This inability to kinetically discriminate between the C(1) alkane and C(1) alcohol is observed as a steady-state concentration of methanol during the two-step oxidation of methane to formaldehyde by sBMO. Unlike methanol, alcohols with chain length C(2)-C(5) do not compete effectively with their respective alkane substrates. Results from product inhibition experiments suggest that the geometry of the active site is optimized for linear molecules four to five carbons in length and is influenced by the regulatory protein component B (butane monooxygenase regulatory component; BMOB). The data suggest that alkane oxidation by sBMO is highly specialized for the turnover of C(3)-C(5) alkanes and the release of their respective alcohol products. Additionally, sBMO is particularly efficient at preventing methane oxidation during growth on linear alkanes > or =C(2,) despite its high sequence homology with sMMO. These results represent, to the best of our knowledge, the first kinetic in vitro characterization of the closest known homologue of sMMO.

Evidence for involvement of copper ions and redox state in regulation of butane monooxygenase in Pseudomonas butanovora

Pseudomonas butanovora possesses an alcohol-inducible alkane monooxygenase, butane monooxygenase (BMO), that initiates growth on C(2)-C(9) alkanes. A lacZ transcriptional reporter strain, P. butanovora bmoX::lacZ, in which the BMO promoter controls the expression of beta-galactosidase activity, was used to show that 1-butanol induced the BMO promoter in the presence or absence of O(2) when lactate-grown, BMO-repressed cells were washed free of lactate and incubated in NH(4)Cl-KNa phosphate buffer. In contrast, when lactate-grown cells of the reporter strain were incubated in phosphate buffer containing the mineral salts of standard growth medium, 1-butanol-dependent induction was significantly repressed at low O(2) (1 to 2% [vol/vol]) and totally repressed under anoxic conditions. The repressive effect of the mineral salts was traced to its copper content. In cells exposed to 1% (vol/vol) O(2), CuSO(4) (0.5 microM) repressed 1-butanol-dependent induction of beta-galactosidase activity. Under oxic conditions (20% O(2) [vol/vol]), significantly higher concentrations of CuSO(4) (2 microM) were required for almost complete repression of induction in lactate-grown cells. A combination of the Cu(2+) reducing agent Na ascorbate (100 microM) and CuSO(4) (0.5 microM) repressed the induction of beta-galactosidase activity under oxic conditions to the same extent that 0.5 microM CuSO(4) alone repressed it under anoxic conditions. Under oxic conditions, 2 microM CuSO(4) repressed induction of the BMO promoter less effectively in butyrate-grown cells of the bmoX::lacZ strain and of an R8-bmoX::lacZ mutant reporter strain with a putative BMO regulator, BmoR, inactivated. Under anoxic conditions, CuSO(4) repression remained highly effective, regardless of the growth substrate, in both BmoR-positive and -negative reporter strains.

Evolutionary ecology and multidisciplinary approaches to prospecting for monooxygenases as biocatalysts

New techniques to explore microbial diversity have led to resurgent interest in prospecting for natural products (bioprospecting or biodiscovery). Although many bioprospecting projects may share little in common at first glance, the vast majority share one particular challenge. Their targets are rare to very rare members of complex natural assemblages. Despite the advances made in bringing new organisms into cultivation and application of culture-independent techniques to isolation of novel genes there remain systematic biases against relatively rare organisms with specific growth requirements. These can frequently be overcome by application of multidisciplinary approaches that take into account principles of evolutionary ecology. Our experiences with prospecting for soluble di-iron monooxygenases (SDIMO) indicate that conventional approaches to organism isolation and metagenomic cloning systematically under-sample diversity in this enzyme family. This reflects that SDIMO-containing organisms are typically relatively low-abundance members of natural assemblages (thus biased against by direct cloning) and SDIMOs have discrete physiological roles in each organism (thus are not amenable to generic enrichment culture strategies). We have sought to overcome this by a PCR-based survey of gene diversity to guide evaluation of subsequent culture or cloning studies. A surprising outcome of this survey was that conventional PCR approaches using degenerate primers also systematically under-sampled diversity, but nested PCR strategies revealed unprecedented diversity. We conclude that many PCR-based gene-prospecting studies are likely to have under-estimated the impact of target:competitor ratios on their success.

Crystal structure of long-chain alkane monooxygenase (LadA) in complex with coenzyme FMN: unveiling the long-chain alkane hydroxylase

LadA, a long-chain alkane monooxygenase, utilizes a terminal oxidation pathway for the conversion of long-chain alkanes (up to at least C(36)) to corresponding primary alcohols in thermophilic bacillus Geobacillus thermodenitrificans NG80-2. Here, we report the first structure of the long-chain alkane hydroxylase, LadA, and its complex with the flavin mononucleotide (FMN) coenzyme. LadA is characterized as a new member of the SsuD subfamily of the bacterial luciferase family via a surprising structural relationship. The LadA:FMN binary complex structure and a LadA:FMN:alkane model reveal a hydrophobic cavity that has dual roles: to provide a hydrogen-bond donor (His138) for catalysis and to create a solvent-free environment in which to stabilize the C4a-hydroperoxyflavin intermediate. Consequently, LadA should catalyze the conversion of long-chain alkanes via the acknowledged flavoprotein monooxygenase mechanism. This finding suggests that the ability of LadA to catalyze the degradation of long-chain alkanes is determined by the binding mode of the long-chain alkane substrates. The LadA structure opens a rational perspective to explore and alter the substrate binding site of LadA, with potential biotechnological applications in areas such as petroleum exploration and treatment of environmental oil pollution.

Mutagenesis of the "leucine gate" to explore the basis of catalytic versatility in soluble methane monooxygenase

Soluble methane monooxygenase (sMMO) from methane-oxidizing bacteria is a multicomponent nonheme oxygenase that naturally oxidizes methane to methanol and can also cooxidize a wide range of adventitious substrates, including mono- and diaromatic hydrocarbons. Leucine 110, at the mouth of the active site in the alpha subunit of the hydroxylase component of sMMO, has been suggested to act as a gate to control the access of substrates to the active site. Previous crystallography of the wild-type sMMO has indicated at least two conformations of the enzyme that have the "leucine gate" open to different extents, and mutagenesis of homologous enzymes has indicated a role for this residue in the control of substrate range and regioselectivity with aromatic substrates. By further refinement of the system for homologous expression of sMMO that we developed previously, we have been able to prepare a range of site-directed mutations at position 110 in the alpha subunit of sMMO. All the mutants (with Gly, Cys, Arg, and Tyr, respectively, at this position) showed relaxations of regioselectivity compared to the wild type with monoaromatic substrates and biphenyl, including the appearance of new products arising from hydroxylation at the 2- and 3- positions on the benzene ring. Mutants with the larger Arg and Trp residues at position 110 also showed shifts in regioselectivity during naphthalene hydroxylation from the 2- to the 1- position. No evidence that mutagenesis of Leu 110 could allow very large substrates to enter the active site was found, however, since the mutants (like the wild type) were inactive toward the triaromatic hydrocarbons anthracene and phenanthrene. Thus, our results indicate that the "leucine gate" in sMMO is more important in controlling the precision of regioselectivity than the sizes of substrates that can enter the active site.

Butane monooxygenase of ‘Pseudomonas butanovora’: purification and biochemical characterization of a terminal-alkane hydroxylating diiron monooxygenase

Butane monooxygenase (sBMO) has been purified to homogeneity from the Gram-negative beta-proteobacterium 'Pseudomonas butanovora' and confirmed to be a three-component diiron monooxygenase system. The reconstituted enzyme complex oxidized C(3)-C(6) linear and branched aliphatic alkanes, which are growth substrates for 'P. butanovora'. The sBMO complex was composed of an iron-containing hydroxylase (BMOH), a flavo-iron sulfur-containing NADH-oxidoreductase (BMOR) and a small regulatory component protein (BMOB). The physical characteristics of sBMO were remarkably similar to the sMMO family of soluble multicomponent diiron monooxgenases. However, the catalytic properties of sBMO were quantitatively different in regard to inactivation in the presence of substrate and product distribution. BMOH was capable of ethene oxidation when supplied with H(2)O(2) and ethene (known as the peroxide shunt), but this activity was at least three orders of magnitude less than that observed for the hydroxylase of sMMO of Methylosinus trichosporium OB3b. BMOH and BMOR were efficient in the oxidation of ethene in the absence of BMOB with regard to rate of reaction and product yield. Regiospecificity of sBMO was strongly biased towards primary hydroxylation, with > or = 80 % of the hydroxylations occurring at the terminal carbon atom.

Evidence for modified mechanisms of chloroethene oxidation in Pseudomonas butanovora mutants containing single amino acid substitutions in the hydroxylase alpha-subunit of butane monooxygenase

The properties of oxidation of dichloroethene (DCE) and trichloroethylene (TCE) by three mutant strains of Pseudomonas butanovora containing single amino acid substitutions in the alpha-subunit of butane monooxygenase hydroxylase (BMOH-alpha) were compared to the properties of the wild-type strain (Rev WT). The rates of oxidation of three chloroethenes (CEs) were reduced in mutant strain G113N and corresponded with a lower maximum rate of butane oxidation. The rate of TCE degradation was reduced by one-half in mutant strain L279F, whereas the rates of DCE oxidation were the same as those in Rev WT. Evidence was obtained that the composition of products of CE oxidation differed between Rev WT and some of the mutant strains. For example, while Rev WT released nearly all available chlorine stoichiometrically during CE oxidation, strain F321Y released about 40% of the chlorine during 1,2-cis-DCE and TCE oxidation, and strain G113N released between 14 and 25% of the available chlorine during oxidation of DCE and 56% of the available chlorine during oxidation of TCE. Whereas Rev WT, strain L279F, and strain F321Y formed stoichiometric amounts of 1,2-cis-DCE epoxide during oxidation of 1,2-cis-DCE, only about 50% of the 1,2-cis-DCE oxidized by strain G113N was detected as the epoxide. Evidence was obtained that 1,2-cis-DCE epoxide was a substrate for butane monooxygenase (BMO) that was oxidized after the parent compound was consumed. Yet all of the mutant strains released less than 40% of the available 1,2-cis-DCE chlorine, suggesting that they have altered activity towards the epoxide. In addition, strain G113N was unable to degrade the epoxide. TCE epoxide was detected during exposure of Rev WT and strain F321Y to TCE but was not detected with strains L279F and G113N. Lactate-dependent O(2) uptake rates were differentially affected by DCE degradation in the mutant strains, providing evidence that some products released by the altered BMOs reduced the impact of CE on cellular toxicity. The use of CEs as substrates in combination with P. butanovora BMOH-alpha mutants might allow insights into the catalytic mechanism of BMO to be obtained.

Alkane hydroxylases involved in microbial alkane degradation

This review focuses on the role and distribution in the environment of alkane hydroxylases and their (potential) applications in bioremediation and biocatalysis. Alkane hydroxylases play an important role in the microbial degradation of oil, chlorinated hydrocarbons, fuel additives, and many other compounds. Environmental studies demonstrate the abundance of alkane degraders and have lead to the identification of many new species, including some that are (near)-obligate alkanotrophs. The availability of a growing collection of alkane hydroxylase gene sequences now allows estimations of the relative abundance of the different enzyme systems and the distribution of the host organisms.