Flagellar formation in C-ring-defective mutants by overproduction of FliI, the ATPase specific for flagellar type III secretion

Identification of a new export signal that targets early subunits to the flagellar type III secretion export machinery

Type III secretion systems (T3SSs) are essential for motility and virulence in many bacterial pathogens. Proteins destined for the flagellar T3SS contain at least two export signals in their N-terminal D0 domain. Here, we describe a third carboxy (C)-terminal signal in early flagellar subunits that facilitates subunit targeting to the export machinery. Mutational analysis identified critical residues within the flagellar hook subunit C-terminal export signal. The flagellar ATPase and cytoplasmic ring components were not required for this targeting, indicating that core export machinery components facilitate substrate targeting via the C-terminal export signal. More broadly, these results demonstrate that multiple distinct export signals within type III secretion substrates facilitate distinct export events at the T3SS export machinery. Our data establish key events in the export mechanism of type III secretion systems: targeting of subunits to and their sequential interactions with key components of the export machinery.

IMPORTANCE

Many bacterial pathogens utilize T3SS to inject virulence proteins (effectors) into host cells or to assemble flagella on the bacterial cell surface. Bacterial flagella present a paradigm for how cells build and operate complex cell-surface "nanomachines." Efficient subunit targeting from the bacterial cytosol to type III secretion systems is essential for rapid assembly and secretion by T3SSs. Subunits are thought to dock at the export machinery before being unfolded and translocated into the export channel. However, little is known about how subunits dock at the export machinery and the events that occur post docking. Here, we identified a new export signal within the C-termini of subunits that is essential for targeting of subunits to the type III export machinery. We show that this new export signal and previously identified export signals are recognized separately and sequentially, revealing a pathway for subunit transit through the type III export machinery in which sequential recognition events carry out different roles at major steps in the export pathway.

Twists and turns: 40 years of investigating how and why bacteria swim

Fifty years of research has transformed our understanding of bacterial movement from one of description, based on a limited number of electron micrographs and some low-magnification studies of cells moving towards or away from chemical effectors, to probably the best understood behavioural system in biology. We have a molecular understanding of how bacteria sense and respond to changes in their environment and detailed structural insights into the workings of one of the most complex motor structures we know of. Thanks to advances in genomics we also understand how, through evolution, different species have tuned and adapted a core shared system to optimize behaviour in their specific environment. In this review, I will highlight some of the unexpected findings we made during my over 40-year career, how those findings changed some of our understanding of bacterial behaviour and biochemistry and some of the battles to have those observations accepted.

High-Throughput Transcriptomic Profiling Reveals the Inhibitory Effect of Hydroquinine on Virulence Factors in Pseudomonas aeruginosa

Hydroquinine is an organic alkaloid compound that exhibits antimicrobial activity against several bacterial strains including strains of both drug-sensitive and multidrug-resistant P. aeruginosa. Despite this, the effects of hydroquinine on virulence factors in P. aeruginosa have not yet been characterized. We therefore aimed to uncover the mechanism of P. aeruginosa hydroquinine-sensitivity using high-throughput transcriptomic analysis. We further confirmed whether hydroquinine inhibits specific virulence factors using RT-qPCR and phenotypic analysis. At half the minimum inhibitory concentration (MIC) of hydroquinine (1.250 mg/mL), 254 genes were differentially expressed (97 downregulated and 157 upregulated). We found that flagellar-related genes were downregulated by between −2.93 and −2.18 Log2-fold change. These genes were consistent with the analysis of gene ontology and KEGG pathway. Further validation by RT-qPCR showed that hydroquinine significantly suppressed expression of the flagellar-related genes. By analyzing cellular phenotypes, P. aeruginosa treated with ½MIC of hydroquinine exhibited inhibition of motility (30−54% reduction) and pyocyanin production (~25−27% reduction) and impaired biofilm formation (~57−87% reduction). These findings suggest that hydroquinine possesses anti-virulence factors, through diminishing flagellar, pyocyanin and biofilm formation.

Diversification of Campylobacter jejuni Flagellar C-Ring Composition Impacts Its Structure and Function in Motility, Flagellar Assembly, and Cellular Processes

Bacterial flagella are reversible rotary motors that rotate external filaments for bacterial propulsion. Some flagellar motors have diversified by recruiting additional components that influence torque and rotation, but little is known about the possible diversification and evolution of core motor components. The mechanistic core of flagella is the cytoplasmic C ring, which functions as a rotor, directional switch, and assembly platform for the flagellar type III secretion system (fT3SS) ATPase. The C ring is composed of a ring of FliG proteins and a helical ring of surface presentation of antigen (SPOA) domains from the switch proteins FliM and one of two usually mutually exclusive paralogs, FliN or FliY. We investigated the composition, architecture, and function of the C ring of Campylobacter jejuni, which encodes FliG, FliM, and both FliY and FliN by a variety of interrogative approaches. We discovered a diversified C. jejuni C ring containing FliG, FliM, and both FliY, which functions as a classical FliN-like protein for flagellar assembly, and FliN, which has neofunctionalized into a structural role. Specific protein interactions drive the formation of a more complex heterooligomeric C. jejuni C-ring structure. We discovered that this complex C ring has additional cellular functions in polarly localizing FlhG for numerical regulation of flagellar biogenesis and spatial regulation of division. Furthermore, mutation of the C. jejuni C ring revealed a T3SS that was less dependent on its ATPase complex for assembly than were other systems. Our results highlight considerable evolved flagellar diversity that impacts motor output, biogenesis, and cellular processes in different species.IMPORTANCE The conserved core of bacterial flagellar motors reflects a shared evolutionary history that preserves the mechanisms essential for flagellar assembly, rotation, and directional switching. In this work, we describe an expanded and diversified set of core components in the Campylobacter jejuni flagellar C ring, the mechanistic core of the motor. Our work provides insight into how usually conserved core components may have diversified by gene duplication, enabling a division of labor of the ancestral protein between the two new proteins, acquisition of new roles in flagellar assembly and motility, and expansion of the function of the flagellum beyond motility, including spatial regulation of cell division and numerical control of flagellar biogenesis in C. jejuni Our results highlight that relatively small changes, such as gene duplications, can have substantial ramifications on the cellular roles of a molecular machine.

Switching and Torque Generation in Swarming E. coli

Escherichia coli swarm on semi-solid surfaces with the aid of flagella. It has been hypothesized that swarmer cells overcome the increased viscous drag near surfaces by developing higher flagellar thrust and by promoting surface wetness with the aid of a flagellar switch. The switch enables reversals between clockwise (CW) and counterclockwise (CCW) directions of rotation of the flagellar motor. Here, we measured the behavior of flagellar motors in swarmer cells. Results indicated that although the torque was similar to that in planktonic cells, the tendency to rotate CCW was higher in swarmer cells. This suggested that swarmers likely have a smaller pool of phosphorylated CheY. Results further indicated that the upregulation of the flagellin gene was not critical for flagellar thrust or swarming. Consistent with earlier reports, moisture added to the swarm surface restored swarming in a CCW-only mutant, but not in a FliG mutant that rotated motors CW-only (FliG^CW). Fluorescence assays revealed that FliG^CW cells grown on agar surfaces carried fewer flagella than planktonic FliG^CW cells. The surface-dependent reduction in flagella correlated with a reduction in the number of putative flagellar preassemblies. These results hint toward a possibility that the conformational dynamics of switch proteins play a role in the proper assembly of flagellar complexes and flagellar export, thereby aiding bacterial swarming.

The FlaG regulator is involved in length control of the polar flagella of Campylobacter jejuni

Campylobacter jejuni cells have bipolar flagella. Both flagella have similar lengths of about one helical turn, or 3.53±0.52 µm. The flagellar filament is composed of two homologous flagellins: FlaA and FlaB. Mutant strains that express either FlaA or FlaB alone produce filaments that are shorter than those of the wild-type. It is reported that the flaG gene could affect filament length in some species of bacteria, but its function remains unknown. We introduced a flaG-deletion mutation into the C. jejuni wild-type strain and flaA- or flaB-deletion mutant strains, and observed their flagella by microscopy. The ΔflaG mutant cells produced long filaments of two helical turns in the wild-type background. The ΔflaAG double mutant cells produced very short FlaB filaments. On the other hand, ΔflaBG double mutant cells produced long FlaA filaments and their morphology was not helical but straight. Furthermore, FlaG was secreted, and a pulldown assay showed that sigma factor 28 was co-precipitated with purified polyhistidine-tagged FlaG. We conclude that FlaG controls flagella length by negatively regulating FlaA filament assembly and discuss the role of FlaA and FlaB flagellins in C. jejuni flagella formation.

An intrinsically disordered linker controlling the formation and the stability of the bacterial flagellar hook

Background

In a macro-molecular complex, any minor change may prove detrimental. For a supra-molecular nano-machine like the bacterial flagellum, which consists of several distinct parts with specific characteristics, stability is important. During the rotation of the bacterial flagellar motor, which is located in the membrane, the flagella rotate at speeds between 200 and 2000 rpm, depending on the bacterial species. The hook substructure of the bacterial flagellum acts as a universal joint connecting the motor to the flagellar filament. We investigated the formation of the bacterial flagellar hook and its overall stability between the FlgE subunits that make up the hook and attempted to understand how this stability differs between bacteria.

Results

An intrinsically disordered segment plays an important role for overall hook stability and for its structural cohesion during motor rotation. The length of this linker segment depends on the species of bacteria; for Salmonella enterica and Campylobacter jejuni it is approximately 37 and 54 residues, respectively. Few residues of the linker are conserved and mutating the conserved residues of the linker yields non-flagellated cells. In the case of Campylobacter, which rotates its flagella at a speed much higher than that of Salmonella, shortening the linker leads to a rupture of the hook at its base, decreasing cell motility. Our experiments show that this segment is required for polymerization and stability of the hook, demonstrating a surprising role for a disordered region in one of the most finely tuned and closely studied macromolecular machines.

Conclusions

This study reveals a detailed functional characteristic of an intrinsically disordered segment in the hook protein. This segment evolved to fulfill a specific role in the formation of the hook, and it is at the core of the stability and flexibility of the hook. Its length is important in the case of bacteria with high-speed rotating flagella. Finding a way of disrupting this linker in Campylobacter might help in preventing infections.

Electronic supplementary material

The online version of this article (doi:10.1186/s12915-017-0438-7) contains supplementary material, which is available to authorized users.

Functional Characterization of EscK (Orf4), a Sorting Platform Component of the Enteropathogenic Escherichia coli Injectisome

The type III secretion system (T3SS) is a supramolecular machine used by many bacterial pathogens to translocate effector proteins directly into the eukaryotic host cell cytoplasm. Enteropathogenic Escherichia coli (EPEC) is an important cause of infantile diarrheal disease in underdeveloped countries. EPEC virulence relies on a T3SS encoded within a chromosomal pathogenicity island known as the locus of enterocyte effacement (LEE). In this work, we pursued the functional characterization of the LEE-encoded protein EscK (previously known as Orf4). We provide evidence indicating that EscK is crucial for efficient T3S and belongs to the SctK (OrgA/YscK/MxiK) protein family, whose members have been implicated in the formation of a sorting platform for secretion of T3S substrates. Bacterial fractionation studies showed that EscK localizes to the inner membrane independently of the presence of any other T3SS component. Combining yeast two-hybrid screening and pulldown assays, we identified an interaction between EscK and the C-ring/sorting platform component EscQ. Site-directed mutagenesis of conserved residues revealed amino acids that are critical for EscK function and for its interaction with EscQ. In addition, we found that T3S substrate overproduction is capable of compensating for the absence of EscK. Overall, our data suggest that EscK is a structural component of the EPEC T3SS sorting platform, playing a central role in the recruitment of T3S substrates for boosting the efficiency of the protein translocation process.

IMPORTANCE

The type III secretion system (T3SS) is an essential virulence determinant for enteropathogenic Escherichia coli (EPEC) colonization of intestinal epithelial cells. Multiple EPEC effector proteins are injected via the T3SS into enterocyte cells, leading to diarrheal disease. The T3SS is encoded within a genomic pathogenicity island termed the locus of enterocyte effacement (LEE). Here we unravel the function of EscK, a previously uncharacterized LEE-encoded protein. We show that EscK is central for T3SS biogenesis and function. EscK forms a protein complex with EscQ, the main component of the cytoplasmic sorting platform, serving as a docking site for T3S substrates. Our results provide a comprehensive functional analysis of an understudied component of T3SSs.

Structural insights into bacterial flagellar hooks similarities and specificities

Across bacteria, the protein that makes the flagellar hook, FlgE, has a high variability in amino acid residue composition and sequence length. We hereby present the structure of two fragments of FlgE protein from Campylobacter jejuni and from Caulobacter crescentus, which were obtained by X-ray crystallography, and a high-resolution model of the hook from Caulobacter. By comparing these new structures of FlgE proteins, we show that bacterial hook can be divided in two distinct parts. The first part comprises domains that are found in all FlgE proteins and that will make the basic structure of the hook that is common to all flagellated bacteria. The second part, hyper-variable both in size and structure, will be bacteria dependent. To have a better understanding of the C. jejuni hook, we show that a special strain of Salmonella enterica, which was designed to encode a gene of flgE that has the extra domains found in FlgE from C. jejuni, is fully motile. It seems that no matter the size of the hook protein, the hook will always have a structure made of 11 protofilaments.

Type III secretion systems: the bacterial flagellum and the injectisome

The flagellum and the injectisome are two of the most complex and fascinating bacterial nanomachines. At their core, they share a type III secretion system (T3SS), a transmembrane export complex that forms the extracellular appendages, the flagellar filament and the injectisome needle. Recent advances, combining structural biology, cryo-electron tomography, molecular genetics, in vivo imaging, bioinformatics and biophysics, have greatly increased our understanding of the T3SS, especially the structure of its transmembrane and cytosolic components, the transcriptional, post-transcriptional and functional regulation and the remarkable adaptivity of the system. This review aims to integrate these new findings into our current knowledge of the evolution, function, regulation and dynamics of the T3SS, and to highlight commonalities and differences between the two systems, as well as their potential applications.

A working model for the type III secretion mechanism in Chlamydia

It has been appreciated for almost 20 years that members of the Chlamydiales possess a virulence-associated type III secretion mechanism. Given the obligate intracellular nature of these bacteria, defining exactly how type III secretion functions to promote pathogenesis has been challenging. We present a working model herein that is based on current evidence.

Effect of FliG three amino acids deletion in Vibrio polar-flagellar rotation and formation

Most of bacteria can swim by rotating flagella bidirectionally. The C ring, located at the bottom of the flagellum and in the cytoplasmic space, consists of FliG, FliM and FliN, and has an important function in flagellar protein secretion, torque generation and rotational switch of the motor. FliG is the most important part of the C ring that interacts directly with a stator subunit. Here, we introduced a three-amino acids in-frame deletion mutation (ΔPSA) into FliG from Vibrio alginolyticus, whose corresponding mutation in Salmonella confers a switch-locked phenotype, and examined its phenotype. We found that this FliG mutant could not produce flagellar filaments in a fliG null strain but the FliG(ΔPSA) protein could localize at the cell pole as does the wild-type protein. Unexpectedly, when this mutant was expressed in a wild-type strain, cells formed flagella efficiently but the motor could not rotate. We propose that this different phenotype in Vibrio and Salmonella might be due to distinct interactions between FliG mutant and FliM in the C ring between the bacterial species.

Composition, formation, and regulation of the cytosolic c-ring, a dynamic component of the type III secretion injectisome

The injectisome is a membrane complex through which some bacteria can inject effector proteins into host cells. This study reveals that the cytosolic C-ring structure has a dynamic relationship to the rest of the injectisome, with implications for the regulation of secretion.

Many gram-negative pathogens employ a type III secretion injectisome to translocate effector proteins into eukaryotic host cells. While the structure of the distal “needle complex” is well documented, the composition and role of the functionally important cytosolic complex remain less well understood. Using functional fluorescent fusions, we found that the C-ring, an essential and conserved cytosolic component of the system, is composed of ~22 copies of SctQ (YscQ in Yersinia enterocolitica), which require the presence of YscQ_C, the product of an internal translation initiation site in yscQ, for their cooperative assembly. Photoactivated localization microscopy (PALM) reveals that in vivo, YscQ is present in both a free-moving cytosolic and a stable injectisome-bound state. Notably, fluorescence recovery after photobleaching (FRAP) shows that YscQ exchanges between the injectisome and the cytosol, with a t_½ of 68 ± 8 seconds when injectisomes are secreting. In contrast, the secretin SctC (YscC) and the major export apparatus component SctV (YscV) display minimal exchange. Under non-secreting conditions, the exchange rate of YscQ is reduced to t_½ = 134 ± 16 seconds, revealing a correlation between C-ring exchange and injectisome activity, which indicates a possible role for C-ring stability in regulation of type III secretion. The stabilization of the C-ring depends on the presence of the functional ATPase SctN (YscN). These data provide new insights into the formation and composition of the injectisome and present a novel aspect of type III secretion, the exchange of C-ring subunits, which is regulated with respect to secretion.

The type III secretion system, also known as the injectisome, is a key virulence factor in many gram-negative bacteria, and is responsible for the transmission of bacterial proteins directly into host cells. While some elements of the system are well characterized, the cytosolic components involved in substrate recognition and handling are not well understood. One of the major questions is the role of the C-ring, an essential yet enigmatic cytosolic injectisome member. We used fluorescence microscopy to analyze the architecture and behavior of the C-ring in live Y. enterocolitica bacteria, a human pathogen. We found that in vivo, the C-ring assembles cooperatively with the help of additional copies of its own C-terminal fragment and has a highly dynamic structure, with C-ring subunits exchanging between the working injectisomes and a cytosolic pool. The rate of exchange is different between secreting and non-secreting injectisomes and depends on the function of the type III secretion ATPase, indicating that the stability of the complex is altered when functioning. This dynamic behaviour raises the possibility that the C-ring is a regulator of targeted protein delivery by the type III secretion system and makes the C-ring a viable target for the development of novel anti-virulence drugs.

HrcQ provides a docking site for early and late type III secretion substrates from Xanthomonas

Pathogenicity of many Gram-negative bacteria depends on a type III secretion (T3S) system which translocates bacterial effector proteins into eukaryotic cells. The membrane-spanning secretion apparatus is associated with a cytoplasmic ATPase complex and a predicted cytoplasmic (C) ring structure which is proposed to provide a substrate docking platform for secreted proteins. In this study, we show that the putative C ring component HrcQ from the plant pathogenic bacterium Xanthomonas campestris pv. vesicatoria is essential for bacterial pathogenicity and T3S. Fractionation studies revealed that HrcQ localizes to the cytoplasm and associates with the bacterial membranes under T3S-permissive conditions. HrcQ binds to the cytoplasmic T3S-ATPase HrcN, its predicted regulator HrcL and the cytoplasmic domains of the inner membrane proteins HrcV and HrcU. Furthermore, we observed an interaction between HrcQ and secreted proteins including early and late T3S substrates. HrcQ might therefore act as a general substrate acceptor site of the T3S system and is presumably part of a larger protein complex. Interestingly, the N-terminal export signal of the T3S substrate AvrBs3 is dispensable for the interaction with HrcQ, suggesting that binding of AvrBs3 to HrcQ occurs after its initial targeting to the T3S system.

Protein export according to schedule: architecture, assembly, and regulation of type III secretion systems from plant- and animal-pathogenic bacteria

Flagellar and translocation-associated type III secretion (T3S) systems are present in most gram-negative plant- and animal-pathogenic bacteria and are often essential for bacterial motility or pathogenicity. The architectures of the complex membrane-spanning secretion apparatuses of both systems are similar, but they are associated with different extracellular appendages, including the flagellar hook and filament or the needle/pilus structures of translocation-associated T3S systems. The needle/pilus is connected to a bacterial translocon that is inserted into the host plasma membrane and mediates the transkingdom transport of bacterial effector proteins into eukaryotic cells. During the last 3 to 5 years, significant progress has been made in the characterization of membrane-associated core components and extracellular structures of T3S systems. Furthermore, transcriptional and posttranscriptional regulators that control T3S gene expression and substrate specificity have been described. Given the architecture of the T3S system, it is assumed that extracellular components of the secretion apparatus are secreted prior to effector proteins, suggesting that there is a hierarchy in T3S. The aim of this review is to summarize our current knowledge of T3S system components and associated control proteins from both plant- and animal-pathogenic bacteria.

The hydrophobic core of FliG domain II is the stabilizer in the Salmonella flagellar motor

The flagellar protein FliG is the major component of the flagellar torque generator, and consists of two separate domains, I and II. Domain I is essential for flagellar assembly, while domain II in the C-terminal region is not essential for flagellar assembly but is dedicated to torque generation. Previously, we found that some fliG mutants were temperature-hypersensitive (hyper-TS) and identified three residues (F236V, D244Y and K273E) on domain II responsible for the temperature-sensitive (TS) phenotype. In this study, we substituted the three residues with all 20 amino acids (X) and analysed the behaviour of the variants at various temperatures. Each group of F236X, D244X and K273X variants gave rise to several hyper-TS mutants. In F236X, only substitution with F and W gave rise to wild-type, while other hydrophobic residues resulted in hyper-TS mutants and hydrophilic residues resulted in non-motile variants. The atomic arrangement around the F236 residue indicated that F236 together with neighbouring residues forms a hydrophobic core in the centre of domain II, which is well conserved among many species. These data suggest that the hydrophobic core may play an essential role in stabilizing the whole structure of domain II, so that changes of physiological conditions in the microenvironment of domain II do not perturb torque generation.

Interaction of the extreme N-terminal region of FliH with FlhA is required for efficient bacterial flagellar protein export

The flagellar type III protein export apparatus plays an essential role in the formation of the bacterial flagellum. FliH forms a complex along with FliI ATPase and is postulated to provide a link between FliI ring formation and flagellar protein export. Two tryptophan residues of FliH, Trp7 and Trp10, are required for the effective docking of the FliH-FliI complex to the export gate made of six membrane proteins. However, it remains unknown which export gate component interacts with these two tryptophan residues. Here, we performed targeted photo-cross-linking of the extreme N-terminal region of FliH (FliH(EN)) with its binding partners. We replaced Trp7 and Trp10 of FliH with p-benzoyl-phenylalanine (pBPA), a photo-cross-linkable unnatural amino acid, to produce FliH(W7pBPA) and FliH(W10pBPA). They were both functional and were photo-cross-linked with one of the export gate proteins, FlhA, but not with the other gate proteins, indicating that these two tryptophan residues are in close proximity to FlhA. Mutant FlhA proteins that are functional in the presence of FliH and FliI but not in their absence showed a significantly reduced function also by N-terminal FliH mutations even in the presence of FliI. We suggest that the interaction of FliH(EN) with FlhA is required for anchoring the FliI hexamer ring to the export gate for efficient flagellar protein export.

Loss of FlhE in the flagellar Type III secretion system allows proton influx into Salmonella and Escherichia coli

flhE belongs to the flhBAE flagellar operon in Enterobacteria, whose first two members function in Type III secretion (T3S). In Salmonella enterica, absence of FlhE affects swarming, but not swimming, motility. Based on a chance observation of a 'green' colony phenotype of flhE mutants on pH indicator plates containing glucose, we have established that this phenotype is associated with lysis of flagellated cells in an acidic environment created by glucose metabolism. The flhE mutant phenotype of Escherichia coli is similar overall to that of S. enterica but is seen in the absence of glucose and, unlike in S. enterica, causes a substantial growth defect. flhE mutants have a lowered cytoplasmic pH in both bacteria, indicative of a proton leak. GFP reporter assays indicate that the leak is dependent on the flagellar system, is present before the T3S system switches to secretion of late substrates, and gets worse after the switch and upon filament assembly, leading to cell lysis. We show that FlhE is a periplasmic protein that co-purifies with flagellar basal bodies. FlhE may act as a plug or a chaperone to regulate proton flow through the flagellar T3S system.

Quantitative proteomics reveals metabolic and pathogenic properties of Chlamydia trachomatis developmental forms

Chlamydia trachomatis is an obligate intracellular pathogen responsible for ocular and genital infections of significant public health importance. C. trachomatis undergoes a biphasic developmental cycle alternating between two distinct forms: the infectious elementary body (EB), and the replicative but non-infectious reticulate body (RB). The molecular basis for these developmental transitions and the metabolic properties of the EB and RB forms are poorly understood as these bacteria have traditionally been difficult to manipulate through classical genetic approaches. Using two-dimensional liquid chromatography - tandem mass spectrometry (LC/LC-MS/MS) we performed a large-scale, label-free quantitative proteomic analysis of C. trachomatis LGV-L2 EB and RB forms. Additionally, we carried out LC-MS/MS to analyse the membranes of the pathogen-containing vacuole ('inclusion'). We developed a label-free quantification approaches to measure protein abundance in a mixed-proteome background which we applied for EB and RB quantitative analysis. In this manner, we catalogued the relative distribution of > 54% of the predicted proteins in the C. trachomatis LGV-L2 proteome. Proteins required for central metabolism and glucose catabolism were predominant in the EB, whereas proteins associated with protein synthesis, ATP generation and nutrient transport were more abundant in the RB. These findings suggest that the EB is primed for a burst in metabolic activity upon entry, whereas the RB form is geared towards nutrient utilization, a rapid increase in cellular mass, and securing the resources for an impending transition back to the EB form. The most revealing difference between the two forms was the relative deficiency of cytoplasmic factors required for efficient type III secretion (T3S) in the RB stage at 18 h post infection, suggesting a reduced T3S capacity or a low frequency of active T3S apparatus assembled on a 'per organism' basis. Our results show that EB and RB proteomes are streamlined to fulfil their predicted biological functions: maximum infectivity for EBs and replicative capacity for RBs.

An infrequent molecular ruler controls flagellar hook length in Salmonella enterica

The bacterial flagellum consists of a long external filament connected to a membrane-embedded basal body at the cell surface by a short curved structure called the hook. In Salmonella enterica, the hook extends 55 nm from the cell surface. FliK, a secreted molecular ruler, controls hook length. Upon hook completion, FliK induces a secretion-specificity switch to filament-type substrate secretion. Here, we demonstrate that an infrequent ruler mechanism determines hook length. FliK is intermittently secreted during hook polymerization. The probability of the specificity switch is an increasing function of hook length. By uncoupling hook polymerization from FliK expression, we illustrate that FliK secretion immediately triggers the specificity switch in hooks greater than the physiological length. The experimental data display excellent agreement with a mathematical model of the infrequent ruler hypothesis. Merodiploid bacteria expressing simultaneously short and long ruler variants displayed hook-length control by the short ruler, further supporting the infrequent ruler model. Finally, the velocity of FliK secretion determines the probability of a productive FliK interaction with the secretion apparatus to change secretion substrate specificity.

The flagellar protein FliL is essential for swimming in Rhodobacter sphaeroides

In this work we characterize the function of the flagellar protein FliL in Rhodobacter sphaeroides. Our results show that FliL is essential for motility in this bacterium and that in its absence flagellar rotation is highly impaired. A green fluorescent protein (GFP)-FliL fusion forms polar and lateral fluorescent foci that show different spatial dynamics. The presence of these foci is dependent on the expression of the flagellar genes controlled by the master regulator FleQ, suggesting that additional components of the flagellar regulon are required for the proper localization of GFP-FliL. Eight independent pseudorevertants were isolated from the fliL mutant strain. In each of these strains a single nucleotide change in motB was identified. The eight mutations affected only three residues located on the periplasmic side of MotB. Swimming of the suppressor mutants was not affected by the presence of the wild-type fliL allele. Pulldown and yeast two-hybrid assays showed that that the periplasmic domain of FliL is able to interact with itself but not with the periplasmic domain of MotB. From these results we propose that FliL could participate in the coupling of MotB with the flagellar rotor in an indirect fashion.

Kinetic characterization of Salmonella FliK-FlhB interactions demonstrates complexity of the Type III secretion substrate-specificity switch

The bacterial flagellum is a complex macromolecular machine consisting of more than 20 000 proteins, most of which must be exported from the cell via a dedicated Type III secretion apparatus. At a defined point in flagellar morphogenesis, hook completion is sensed and the apparatus switches substrate specificity type from rod and hook proteins to filament ones. How the switch works is a subject of intense interest. FliK and FlhB play central roles. In the present study, two optical biosensing methods were used to characterize FliK-FlhB interactions using wild-type and two variant FlhBs from mutants with severe flagellar structural defects. Binding was found to be complex with fast and slow association and dissociation components. Surprisingly, wild-type and variant FlhBs had similar kinetic profiles and apparent affinities, which ranged between 1 and 10.5 microM, suggesting that the specificity switch is more complex than presently understood. Other binding experiments provided evidence for a conformational change after binding. Liquid chromatography-mass spectrometry (LC-MS) and NMR experiments were performed to identify a cyclic intermediate product whose existence supports the mechanism of autocatalytic cleavage at FlhB residue N269. The present results show that while autocatalytic cleavage is necessary for proper substrate specificity switching, it does not result in an altered interaction with FliK, strongly suggesting the involvement of other proteins in the mechanism.

Deciphering the assembly of the Yersinia type III secretion injectisome

The assembly of the Yersinia enterocolitica type III secretion injectisome was investigated by grafting fluorescent proteins onto several components, YscC (outer-membrane (OM) ring), YscD (forms the inner-membrane (IM) ring together with YscJ), YscN (ATPase), and YscQ (putative C ring). The recombinant injectisomes were functional and appeared as fluorescent spots at the cell periphery. Epistasis experiments with the hybrid alleles in an array of injectisome mutants revealed a novel outside-in assembly order: whereas YscC formed spots in the absence of any other structural protein, formation of YscD foci required YscC, but not YscJ. We therefore propose that the assembly starts with YscC and proceeds through the connector YscD to YscJ, which was further corroborated by co-immunoprecipitation experiments. Completion of the membrane rings allowed the subsequent assembly of cytosolic components. YscN and YscQ attached synchronously, requiring each other, the interacting proteins YscK and YscL, but no further injectisome component for their assembly. These results show that assembly is initiated by the formation of the OM ring and progresses inwards to the IM ring and, finally, to a large cytosolic complex.

The role of the FliK molecular ruler in hook-length control in Salmonella enterica

A molecular ruler, FliK, controls the length of the flagellar hook. FliK measures hook length and catalyses the secretion-substrate specificity switch from rod-hook substrate specificity to late substrate secretion, which includes the filament subunits. Here, we show normal hook-length control and filament assembly in the complete absence of the C-ring thus refuting the previous 'cup' model for hook-length control. Mutants of C-ring components, which are reported to produce short hooks, show a reduced rate of hook-basal body assembly thereby allowing for a premature secretion-substrate specificity switch. Unlike fliK null mutants, hook-length control in an autocleavage-defective mutant of flhB, the protein responsible for the switch to late substrate secretion, is completely abolished. FliK deletion variants that retain the ability to measure hook length are secreted thus demonstrating that FliK directly measures rod-hook length during the secretion process. Finally, we present a unifying model accounting for all published data on hook-length control in which FliK acts as a molecular ruler that takes measurements of rod-hook length while being intermittently secreted during the assembly process of the hook-basal body complex.

C-ring requirement in flagellar type III secretion is bypassed by FlhDC upregulation

The cytoplasmic C-ring of the flagellum consists of FliG, FliM and FliN and acts as an affinity cup to localize secretion substrates for protein translocation via the flagellar-specific type III secretion system. Random T-POP transposon mutagenesis was employed to screen for insertion mutants that allowed flagellar type III secretion in the absence of the C-ring using the flagellar type III secretion system-specific hook-beta-lactamase reporter (Lee and Hughes, 2006). Any condition resulting in at least a twofold increase in flhDC expression was sufficient to overcome the requirement for the C-ring and the ATPase complex FliHIJ in flagellar type III secretion. Insertions in known and unknown flagellar regulatory loci were isolated as well as chromosomal duplications of the flhDC region. The twofold increased flhDC mRNA level coincided in a twofold increase in the number of hook-basal bodies per cell as analysed by fluorescent microscopy. These results indicate that the C-ring functions as a nonessential affinity cup-like structure during flagellar type III secretion to enhance the specificity and efficiency of the secretion process.