Bacillus subtilis spore coats: complexity and purification of a unique polypeptide component

Mode of Action of Disinfection Chemicals on the Bacterial Spore Structure and Their Raman Spectra

Contamination of toxic spore-forming bacteria is problematic since spores can survive a plethora of disinfection chemicals and it is hard to rapidly detect if the disinfection chemical has inactivated the spores. Thus, robust decontamination strategies and reliable detection methods to identify dead from viable spores are critical. In this work, we investigate the chemical changes of Bacillus thuringiensis spores treated with sporicidal agents such as chlorine dioxide, peracetic acid, and sodium hypochlorite using laser tweezers Raman spectroscopy. We also image treated spores using SEM and TEM to verify if we can correlate structural changes in the spores with changes to their Raman spectra. We found that over 30 min, chlorine dioxide did not change the Raman spectrum or the spore structure, peracetic acid showed a time-dependent decrease in the characteristic DNA/DPA peaks and ∼20% of the spores were degraded and collapsed, and spores treated with sodium hypochlorite showed an abrupt drop in DNA and DPA peaks within 20 min and some structural damage to the exosporium. Structural changes appeared in spores after 10 min, compared to the inactivation time of the spores, which is less than a minute. We conclude that vibrational spectroscopy provides powerful means to detect changes in spores but it might be problematic to identify if spores are live or dead after a decontamination procedure.

Diverse supramolecular structures formed by self-assembling proteins of the Bacillus subtilis spore coat

Bacterial spores (endospores), such as those of the pathogens Clostridium difficile and Bacillus anthracis, are uniquely stable cell forms, highly resistant to harsh environmental insults. Bacillus subtilis is the best studied spore‐former and we have used it to address the question of how the spore coat is assembled from multiple components to form a robust, protective superstructure. B. subtilis coat proteins (CotY, CotE, CotV and CotW) expressed in Escherichia coli can arrange intracellularly into highly stable macro‐structures through processes of self‐assembly. Using electron microscopy, we demonstrate the capacity of these proteins to generate ordered one‐dimensional fibres, two‐dimensional sheets and three‐dimensional stacks. In one case (CotY), the high degree of order favours strong, cooperative intracellular disulfide cross‐linking. Assemblies of this kind could form exquisitely adapted building blocks for higher‐order assembly across all spore‐formers. These physically robust arrayed units could also have novel applications in nano‐biotechnology processes.

Quantitative X-ray phase contrast waveguide imaging of bacterial endospores

Quantitative X-ray phase contrast imaging uniquely offers quantitative imaging information in terms of electron density maps allowing for mass and mass density determinations of soft biological samples (‘weighing with light’). Here, it was carried out using coherent X-ray waveguide illumination, yielding values of the mass and mass density of freeze-dried bacterial endospores (Bacillus spp.).

Quantitative waveguide-based X-ray phase contrast imaging has been carried out on the level of single, unstained, unsliced and freeze-dried bacterial cells of Bacillus thuringiensis and Bacillus subtilis using hard X-rays of 7.9 keV photon energy. The cells have been prepared in the metabolically dormant state of an endospore. The quantitative phase maps obtained by iterative phase retrieval using a modified hybrid input–output algorithm allow for mass and mass density determinations on the level of single individual endospores but include also large field of view investigations. Additionally, a direct reconstruction based on the contrast transfer function is investigated, and the two approaches are compared. Depending on the field of view and method, a resolution down to 65 nm was achieved at a maximum applied dose of below 5 × 10⁵ Gy. Masses in the range of about ∼110–190 (20) fg for isolated endospores have been obtained.

Spore proteomics: the past, present and the future

Endospores are metabolically dormant, multi-layered cellular structures formed by Gram-positive bacteria belonging to the genera Bacillus, Clostridium and related organisms. Their external layers are composed of proteins which in part play a role in the resistance behaviour of spores to varied chemical and environmental assaults. Thus, protein analysis is of major interest in spore biology. Spore proteomic studies have been carried out previously but these studies have focused on the soluble coat protein fraction. Using gel-based techniques, protein identification and analysis were performed. Mass spectrometry-driven proteomics has opened new avenues to resolve in particular the insoluble part of the spore layer proteomes. Mass spectrometry-based qualitative and quantitative proteomics methods expand the knowledge about both the actual composition and the amount of proteins in their various layers. The techniques can also be used to study the integrity of the layers as well as spore biology in general. This notion is explored concisely in this mini-review.

Fluorescence of bioaerosols: mathematical model including primary fluorescing and absorbing molecules in bacteria

This paper describes a mathematical model of fluorescent biological particles composed of bacteria, viruses, or proteins. The fluorescent and/or light absorbing molecules included in the model are amino acids (tryptophan, etc.); nucleic acids (DNA, RNA, etc.); coenzymes (nicotinamide adenine dinucleotides, flavins, and vitamins B₆ and K and variants of these); and dipicolinates. The concentrations, absorptivities, and fluorescence quantum yields are estimated from the literature, often with large uncertainties. The bioparticles in the model are spherical and homogeneous. Calculated fluorescence cross sections for particles excited at 266, 280, and 355 nm are compared with measured values from the literature for several bacteria, bacterial spores and albumins. The calculated 266- and 280-nm excited fluorescence is within a factor of 3.2 of the measurements for the vegetative cells and proteins, but overestimates the fluorescence of spores by a factor of 10 or more. This is the first reported modeling of the fluorescence of bioaerosols in which the primary fluorophores and absorbing molecules are included.

Characterization and dye decolorization ability of an alkaline resistant and organic solvents tolerant laccase from Bacillus licheniformis LS04

A new bacterial strain exhibiting laccase activity was isolated from forest soil and was identified as Bacillus licheniformis LS04. The spore laccase of B. licheniformis LS04 demonstrated a broad pH range for catalyzing substrates. It was quite stable at high temperature and alkaline pH. There was no loss of laccase activity after 10 days incubation at pH 9.0, and about 16% of the initial activity was detected after 10h at 80°C. In addition, the spore laccase was tolerant towards 1M of NaCl and 30% of organic solvents. Reactive black 5, reactive blue 19 and indigo carmine were decolorized by the spore laccase in the absence of mediator. Meanwhile, the decolorization process was efficiently promoted when acetosyringone was present, with more than 80% of color removal in 1h at pH 6.6 or 9.0. The unusual properties indicated a high potential in industrial applications for this novel spore laccase.

Bacterial spore structures and their protective role in biocide resistance

The structure and chemical composition of bacterial spores differ considerably from those of vegetative cells. These differences largely account for the unique resistance properties of the spore to environmental stresses, including disinfectants and sterilants, resulting in the emergence of spore-forming bacteria such as Clostridium difficile as major hospital pathogens. Although there has been considerable work investigating the mechanisms of action of many sporicidal biocides against Bacillus subtilis spores, there is far less information available for other species and particularly for various Clostridia. This paucity of information represents a major gap in our knowledge given the importance of Clostridia as human pathogens. This review considers the main spore structures, highlighting their relevance to spore resistance properties and detailing their chemical composition, with a particular emphasis on the differences between various spore formers. Such information will be vital for the rational design and development of novel sporicidal chemistries with enhanced activity in the future.

Gel-free proteomic identification of the Bacillus subtilis insoluble spore coat protein fraction

Species from the genus Bacillus have the ability to form endospores, dormant cellular forms that are able to survive heat and acid preservation techniques commonly used in the food industry. Resistance characteristics of spores towards various environmental stresses are in part attributed to their coat proteins. Previously, 70 proteins have been assigned to the spore coat of Bacillus subtilis using SDS-PAGE, 2-DE gel approaches, protein localization studies and genome-wide transcriptome studies. Here, we present a "gel-free" protocol that is capable of comprehensive B. subtilis spore coat protein extraction and addresses the insoluble coat fraction. Using LC-MS/MS we identified 55 proteins from the insoluble B. subtilis spore coat protein fraction, of which 21 are putative novel spore coat proteins not assigned to the spore coat until now. Identification of spore coat proteins from a B. subtilis food-spoilage isolate corroborated a generic and "applied" use of our protocol. To develop specific and sensitive spore detection and/or purification systems from food stuff or patient material, suitable protein targets can be derived from our proteomic approach. Finally, the protocol can be extended to study cross-linking among the spore coat proteins as well as for their quantification.

Optimizing Bacillus subtilis spore isolation and quantifying spore harvest purity

Investigating the biochemistry, resilience and environmental interactions of bacterial endospores often requires a pure endospore biomass free of vegetative cells. Numerous endospore isolation methods, however, neglect to quantify the purity of the final endospore biomass. To ensure low vegetative cell contamination we developed a quality control technique that enables rapid quantification of endospore harvest purity. This method quantifies spore purity using bright-field and fluorescence microscopy imaging in conjunction with automated cell counting software. We applied this method to Bacillus subtilis endospore harvests isolated using a two-phase separation method that utilizes mild chemicals. The average spore purity of twenty-two harvests was 88±11% (error is 1σ) with a median value of 93%. A spearman coefficient of 0.97 correlating automated and manual bacterial counts confirms the accuracy of software generated data.

Isolation and Characterization of Laccase Activity in a Novel Bacillus amyloliquefaciens LC02

Bacterial strains exhibiting laccase activity were isolated from the forest soil. A strain LC02 with syringaldazine oxidation ability was obtained using enrichment medium supplemented with copper ions. The isolated strain was identified as Bacillus amyloliquefaciens using physiological and biochemical tests as well as 16S rDNA sequence analysis. The characterization of spore laccase activity was investigated. The result showed that the optimum pH and temperature of the enzyme was 6.6 and 70°C, respectively. A great thermostability was observed for the spore laccase at 70°C. Laccase activity was strongly inhibited by 0.1 mmol/L NaN3, dithiothreitol and cysteine.

Manganese oxidation by spores and spore coats of a marine bacillus species

Bacillus sp. strain SG-1 is a marine bacterial species isolated from a near-shore manganese sediment sample. Its mature dormant spores promote the oxidation of Mn to MnO(2). By quantifying the amounts of immobilized and oxidized manganese, it was established that bound manganese was almost instantaneously oxidized. When the final oxidation of manganese by the spores was partly inhibited by NaN(3) or anaerobiosis, an equivalent decrease in manganese immobilization was observed. After formation of a certain amount of MnO(2) by the spores, the oxidation rate decreased. A maximal encrustment was observed after which no further oxidation occurred. The oxidizing activity could be recovered by reduction of the MnO(2) with hydroxylamine. Once the spores were encrusted, they could bind significant amounts of manganese, even when no oxidation occurred. Purified spore coat preparations oxidized manganese at the same rate as intact spores. During the oxidation of manganese in spore coat preparations, molecular oxygen was consumed and protons were liberated. The data indicate that a spore coat component promoted the oxidation of Mn in a biologically catalyzed process, after adsorption of the ion to incipiently formed MnO(2). Eventually, when large amounts of MnO(2) were allowed to accumulate, the active sites were masked and further oxidation was prevented.

Cobalt(II) Oxidation by the Marine Manganese(II)-Oxidizing Bacillus sp. Strain SG-1

The geochemical cycling of cobalt (Co) has often been considered to be controlled by the scavenging and oxidation of Co(II) on the surface of manganese [Mn(III,IV)] oxides or manganates. Because Mn(II) oxidation in the environment is often catalyzed by bacteria, we have investigated the ability of Mn(II)-oxidizing bacteria to bind and oxidize Co(II) in the absence of Mn(II) to determine whether some Mn(II)-oxidizing bacteria also oxidize Co(II) independently of Mn oxidation. We used the marine Bacillus sp. strain SG-1, which produces mature spores that oxidize Mn(II), apparently due to a protein in their spore coats (R.A. Rosson and K. H. Nealson, J. Bacteriol. 151:1027-1034, 1982; J. P. M. de Vrind et al., Appl. Environ. Microbiol. 52:1096-1100, 1986). A method to measure Co(II) oxidation using radioactive Co as a tracer and treatments with nonradioactive (cold) Co(II) and ascorbate to discriminate bound Co from oxidized Co was developed. SG-1 spores were found to oxidize Co(II) over a wide range of pH, temperature, and Co(II) concentration. Leucoberbelin blue, a reagent that reacts with Mn(III,IV) oxides forming a blue color, was found to also react with Co(III) oxides and was used to verify the presence of oxidized Co in the absence of added Mn(II). Co(II) oxidation occurred optimally around pH 8 and between 55 and 65 degrees C. SG-1 spores oxidized Co(II) at all Co(II) concentrations tested from the trace levels found in seawater to 100 mM. Co(II) oxidation was found to follow Michaelis-Menten kinetics. An Eadie-Hofstee plot of the data suggests that SG-1 spores have two oxidation systems, a high-affinity-low-rate system (K(m), 3.3 x 10 M; V(max), 1.7 x 10 M . spore . h) and a low-affinity-high-rate system (K(m), 5.2 x 10 M; V(max), 8.9 x 10 M . spore . h). SG-1 spores did not oxidize Co(II) in the absence of oxygen, also indicating that oxidation was not due to abiological Co(II) oxidation on the surface of preformed Mn(III,IV) oxides. These results suggest that some microorganisms may directly oxidize Co(II) and such biological activities may exert some control on the behavior of Co in nature. SG-1 spores may also have useful applications in metal removal, recovery, and immobilization processes.

Oxidation of Manganese and Formation of Mn(3)O(4) (Hausmannite) by Spore Coats of a Marine Bacillus sp

Isolated spore coats of a marine Bacillus species were incubated in 25 mM MnCl(2) at pH 7.5. Manganese precipitates, formed on the coat surfaces, were analyzed by transmission electron microscopy, electron diffraction, and energy-dispersive X-ray spectroscopy. Initially, an amorphous manganese oxide was observed on the coats which recrystallized to hausmannite after prolonged incubation in the MnCl(2) solution. The spore coats catalyze the oxidation of Mn(II) and have no structural influence on the final mineral phase precipitated.

The physical state of water in bacterial spores

The bacterial spore, the hardiest known life form, can survive in a metabolically dormant state for many years and can withstand high temperatures, radiation, and toxic chemicals. The molecular basis of spore dormancy and resistance is not understood, but the physical state of water in the different spore compartments is thought to play a key role. To characterize this water in situ, we recorded the water (2)H and (17)O spin relaxation rates in D(2)O-exchanged Bacillus subtilis spores over a wide frequency range. The data indicate high water mobility throughout the spore, comparable with binary protein-water systems at similar hydration levels. Even in the dense core, the average water rotational correlation time is only 50 ps. Spore dormancy therefore cannot be explained by glass-like quenching of molecular diffusion but may be linked to dehydration-induced conformational changes in key enzymes. The data demonstrate that most spore proteins are rotationally immobilized, which may contribute to heat resistance by preventing heat-denatured proteins from aggregating irreversibly. We also find that the water permeability of the inner membrane is at least 2 orders of magnitude lower than for model membranes, consistent with the reported high degree of lipid immobilization in this membrane and with its proposed role in spore resistance to chemicals that damage DNA. The quantitative results reported here on water mobility and transport provide important clues about the mechanism of spore dormancy and resistance, with relevance to food preservation, disease prevention, and astrobiology.

Processing, assembly and localization of a Bacillus anthracis spore protein

All Bacillus spores are encased in macromolecular shells. One of these is a proteinacious shell called the coat that, in Bacillus subtilis, provides critical protective functions. The Bacillus anthracis spore is the infectious particle for the disease anthrax. Therefore, the coat is of particular interest because it may provide essential protective functions required for the appearance of anthrax. Here, we analyse a protein component of the spore outer layers that was previously designated BxpA. Our data indicate that a significant amount of BxpA is located below the spore coat and associated with the cortex. By SDS-PAGE, BxpA migrates as a 9 kDa species when extracted from Sterne strain spores, and as 11 and 14 kDa species from Ames strain spores, even though it has predicted masses of 27 and 29 kDa, respectively, in these two strains. We investigated the possibility that BxpA is subject to post-translational processing as previously suggested. In B. subtilis, a subset of coat proteins is proteolysed or cross-linked by the spore proteins YabG or Tgl, respectively. To investigate the possibility that similar processing occurs in B. anthracis, we generated mutations in the yabG or tgl genes in the Sterne and Ames strains and analysed the consequences for BxpA assembly by SDS-PAGE. We found that in a tgl mutant of B. anthracis, the apparent mass of BxpA increased. This is consistent with the possibility that Tgl directs the cross-linking of BxpA into a form that normally does not enter the gel. Unexpectedly, the apparent mass of BxpA also increased in a yabG mutant, suggesting a relatively complex role for proteolysis in spore protein maturation in B. anthracis. These data reveal a previously unobserved event in spore protein maturation in B. anthracis. We speculate that proteolysis and cross-linking are ubiquitous spore assembly mechanisms throughout the genus Bacillus.

Structure, assembly, and function of the spore surface layers

Endospores formed by Bacillus, Clostridia, and related genera are encased in a protein shell called the coat. In many species, including B. subtilis, the coat is the outermost spore structure, and in other species, such as the pathogenic organisms B. anthracis and B. cereus, the spore is encased in an additional layer called the exosporium. Both the coat and the exosporium have roles in protection of the spore and in its environmental interactions. Assembly of both structures is a function of the mother cell, one of two cellular compartments of the developing sporangium. Studies in B. subtilis have revealed that the timing of coat protein production, the guiding role of a small group of morphogenetic proteins, and several types of posttranslational modifications are essential for the fidelity of the assembly process. Assembly of the exosporium requires a set of novel proteins as well as homologues of proteins found in the outermost layers of the coat and of some of the coat morphogenetic factors, suggesting that the exosporium is a more specialized structure of a multifunctional coat. These and other insights into the molecular details of spore surface morphogenesis provide avenues for exploitation of the spore surface layers in applications for biotechnology and medicine.

Bacillus subtilis spoVIF (yjcC) gene, involved in coat assembly and spore resistance

In systematic screening four sporulation-specific genes, yjcA, yjcB, yjcZ and yjcC, of unknown function were found in Bacillus subtilis. These genes are located just upstream of the cotVWXYZ gene cluster oriented in the opposite direction. Northern blot analysis showed that yjcA was transcribed by the SigE RNA polymerase beginning 2 h (t(2)) after the onset of sporulation, and yjcB, yjcZ and yjcC were transcribed by the SigK RNA polymerase beginning at t(4) of sporulation. The transcription of yjcZ was dependent on SigK and GerE. The consensus sequences of the appropriate sigma factors were found upstream of each gene. There were putative GerE-binding sites upstream of yjcZ. Insertional inactivation of the yjcC gene resulted in a reduction in resistance of the mutant spores to lysozyme and heat. Transmission electron microscopic examination of yjcC spores revealed a defect of sporulation at stage VI, resulting in loss of spore coats. These results suggest that YjcC is involved in assembly of spore coat proteins that have roles in lysozyme resistance. It is proposed that yjcC should be renamed as spoVIF.

Proteomics characterization of novel spore proteins of Bacillus subtilis

The spores of Bacillus subtilis have characteristic properties and consist of complex structures including various types of proteins. To perform comprehensive analysis of the protein composition of the spores, the proteins extracted from the spore were analysed by a combination of one-dimensional PAGE and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) using Turboquest SEQUEST software interfaced with the DNA sequence database of B. subtilis. A total of 154 proteins were identified, and 69 of them were novel. The remaining 85 proteins have been previously reported as sporulation-specific proteins or as proteins that are synthesized in vegetative cells. The expression pattern of each gene deduced to encode novel spore proteins was analysed using a series of strains carrying a lacZ reporter gene. The results revealed that the expression of 26 genes was dependent on sporulation-specific sigma factors, namely sigma(F), sigma(E), sigma(G) and sigma(K). In this study, it is demonstrated that the combination of the techniques of SDS-PAGE and LC-MS/MS, with the mutant library of B. subtilis, is an effective tool for the analysis of complicated cellular structures.

Structure and assembly of the bacterial endospore coat

Many biological processes are mediated through the action of multiprotein complexes, often assembled at specific cellular locations. Bacterial endospores for example, are encased in a proteinaceous coat, which confers resistance to lysozyme and harsh chemicals and influences the spore response to germinants. In Bacillus subtilis, the coat is composed of more than 20 polypeptides, organized into three main layers: an amorphous undercoat; a lamellar, lightly staining inner structure; and closely apposed to it, a striated electron-dense outer coat. Synthesis of the coat proteins is temporally and spatially governed by a cascade of four mother cell-specific transcription factors. However, the order of assembly and final destination of the coat structural components may rely mainly on specific protein-protein interactions, as well as on the action of accessory morphogenetic proteins. Proteolytic events, protein-protein crosslinking, and protein glycosylation also play a role in the assembly process. These modifications are carried out by enzymes that may themselves be targeted to the coat layers. Coat genes have been identified by reverse genetics or, more recently, by screens for mother cell-specific promoters or for peptide sequences able to interact with certain bait proteins. A role for a given locus in coat assembly is established by a combination of regulatory, functional, morphological, and topological criteria. Because of the amenability of B. subtilis to genetic analysis (now facilitated by the knowledge of its genome sequence), coat formation has become an attractive model for the assembly of complex macromolecular structures during development.

Bacillus subtilis spore coat

In response to starvation, bacilli and clostridia undergo a specialized program of development that results in the production of a highly resistant dormant cell type known as the spore. A proteinacious shell, called the coat, encases the spore and plays a major role in spore survival. The coat is composed of over 25 polypeptide species, organized into several morphologically distinct layers. The mechanisms that guide coat assembly have been largely unknown until recently. We now know that proper formation of the coat relies on the genetic program that guides the synthesis of spore components during development as well as on morphogenetic proteins dedicated to coat assembly. Over 20 structural and morphogenetic genes have been cloned. In this review, we consider the contributions of the known coat and morphogenetic proteins to coat function and assembly. We present a model that describes how morphogenetic proteins direct coat assembly to the specific subcellular site of the nascent spore surface and how they establish the coat layers. We also discuss the importance of posttranslational processing of coat proteins in coat morphogenesis. Finally, we review some of the major outstanding questions in the field.

Involvement of superoxide dismutase in spore coat assembly in Bacillus subtilis

Endospores of Bacillus subtilis are enclosed in a proteinaceous coat which can be differentiated into a thick, striated outer layer and a thinner, lamellar inner layer. We found that the N-terminal sequence of a 25-kDa protein present in a preparation of spore coat proteins matched that of the Mn-dependent superoxide dismutase (SOD) encoded by the sod4 locus. sod4 is transcribed throughout the growth and sporulation of a wild-type strain and is responsible for the SOD activity detected in total cell extracts prepared from B. subtilis. Disruption of the sod4 locus produced a mutant that lacked any detectable SOD activity during vegetative growth and sporulation. The sodA mutant was not impaired in the ability to form heat- or lysozyme-resistant spores. However, examination of the coat layers of sodA mutant spores revealed increased extractability of the tyrosine-rich outer coat protein CotG. We showed that this condition was not accompanied by augmented transcription of the cotG gene in sporulating cells of the sodA mutant. We conclude that SodA is required for the assembly of CotG into the insoluble matrix of the spore and suggest that CotG is covalently cross-linked into the insoluble matrix by an oxidative reaction dependent on SodA. Ultrastructural analysis revealed that the inner coat formed by a sodA mutant was incomplete. Moreover, the outer coat lacked the characteristic striated appearance of wild-type spores, a pattern that was accentuated in a cotG mutant. These observations suggest that the SodA-dependent formation of the insoluble matrix containing CotG is largely responsible for the striated appearance of this coat layer.

Transglutaminase in sporulating cells of Bacillus subtilis

We screened various Bacillus species producing transglutaminase (TGase), measured as labeled putrescine incorporated into N,N-dimethylcasein. As a result, we detected TGase activity in sporulating cells of B. subtilis, B. cereus, B. alvei and B. aneurinolyticus, and found TGase activity related to sporulation. TGase activity of Bacillus subtilis was detected in lysozyme-treated sporulating cells during late sporulation, but not in cells without lysozyme treatment or the supernatant of the culture broth. TGase was found to be localized on spores. TGase was preliminarily purified by gel filtration chromatography for characterization. Its activity was eluted in the fractions indicating a molecular weight of approximately 23 kDa. TGase could cross-link and polymerize a certain protein. The enzyme was strongly suggested to form epsilon-(gamma-glutamyl)lysine bonds, which were detected in the spore coat proteins of B. subtilis. The activity was Ca(2+)-independent like the TGases derived from Streptoverticillium or some plants. It is suggested that TGase is expressed during sporulation and plays a role in the assembly of the spore coat proteins of the genus Bacillus.

Adjacent and divergently oriented operons under the control of the sporulation regulatory protein GerE in Bacillus subtilis

The DNA-binding protein GerE is the latest-acting regulatory protein in the mother cell line of gene expression during sporulation in Bacillus subtilis. GerE directs the transcription of several genes that encode structural components of the protein coat that encases the mature spore. We report on the identification and characterization of a cluster of additional genes whose transcription is dependent on GerE. These genes, which are located in the replication terminus region of the chromosome (181 degrees on the genetic map), are arranged in adjacent and divergently oriented operons called cgeAB and cgeCDE, which consist of two and at least three genes, respectively. CgeD, the product of the second member of the cgeCDE operon, is strikingly similar to the product of a B. subtilis gene (ipa-63d) of unknown function and is similar at its amino terminus to certain glycosyl transferases involved in polysaccharide biosynthesis. Strains with mutations in the cgeAB and cgeCDE operons produce spores with altered surface properties, on which basis we propose that proteins encoded by these operons influence maturation of the outermost layer of the spore, perhaps by glycosylation of coat proteins at the spore surface.

Cloning and characterization of a cluster of genes encoding polypeptides present in the insoluble fraction of the spore coat of Bacillus subtilis

The Bacillus subtilis spore coat is composed of at least 15 polypeptides plus an insoluble protein fraction arranged in three morphological layers. The insoluble fraction accounts for about 30% of the coat protein and is resistant to solubilization by a variety of reagents, implying extensive cross-linking. A dodecapeptide was purified from this fraction by formic acid hydrolysis and reverse-phase high-performance liquid chromatography. This peptide was sequenced, and a gene designated cotX was cloned by reverse genetics. The cotX gene encoding the dodecapeptide at its amino end was clustered with four other genes designated cotV, cotW, cotY, and cotZ. These genes were mapped to 107 degrees between thiB and metA on the B. subtilis chromosome. The deduced amino acid sequences of the cotY and cotZ genes are very similar. Both proteins are cysteine rich, and CotY antigen was present in spore coat extracts as disulfide cross-linked multimers. There was little CotX antigen in the spore coat soluble fraction, and deletion of this gene resulted in a 30% reduction in the spore coat insoluble fraction. Spores produced by strains with deletions of the cotX, cotYZ, or cotXYZ genes were heat and lysozyme resistant but readily clumped and responded more rapidly to germinants than did spores from the wild type. In electron micrographs, there was a less densely staining outer coat in spores produced by the cotX null mutant, and those produced by a strain with a deletion of the cotXYZ genes had an incomplete outer coat. These proteins, as part of the coat insoluble fraction, appear to be localized to the outer coat and influence spore hydrophobicity as well as the accessibility of germinants.

Characterization of a sporulation gene, spoIVA, involved in spore coat morphogenesis in Bacillus subtilis

Mutations in the spoIVA locus of Bacillus subtilis abolish cortex synthesis and interfere with the synthesis and assembly of the spore coat. We have characterized the cloned spoIVA locus in terms of its physical structure and regulation during sporulation. The locus contains a single gene capable of encoding an acidic protein of 492 amino acids (molecular weight, 55,174). The gene is transcribed from a sigma E-dependent promoter soon after the formation of the spore septum. A genetic test indicated that expression of spoIVA is only necessary in the mother cell compartment for the formation of a mature spore. This, together with the phenotypic properties of spoIVA mutations, would be in accord with the hypothesis that sigma E is only active after septation and in the mother cell compartment.

Structural and germination defects of Bacillus subtilis spores with altered contents of a spore coat protein

The start sites for transcription and translation of a Bacillus subtilis spore coat protein gene, cotT, were determined. The CotT protein was synthesized as a 10.1-kDa precursor which was processed to a coat polypeptide of 7.8 kDa. Insertional inactivation of the cotT gene resulted in spores with an altered appearance of the inner coat layers and slow germination in response to a germination solution containing fructose, glucose, and asparagine. Rates of germination in L-alanine and in Penassay broth were the same as that of the wild type. A strain containing the cotT gene on a low-copy-number plasmid produced spores with an excess of CotT precursor and a thickening of the striated inner coat. These spores responded poorly to all of the germinants mentioned above. A site-directed mutation of the codon at the processing site of CotT resulted in the accumulation of the precursor in sporulating cells and on the spores, but there was no effect on the germination rates or solvent resistance of these spores. Both the lack and the overproduction of CotT led to subtle alterations in the structure of the inner spore coat and in the capacity of spores to respond to particular germinants.

Characterization and deposition of the proteins in the outermost layer of Bacillus megaterium spore

It was proved that three spore coat proteins of 48, 36, and 22 kDa (P48, P36, and P22) were the components of the outermost layer (OL) of Bacillus megaterium ATCC 12872 spore by analysis of the isolated OL. And it was indicated that these proteins were deposited not by disulfide bond, but by ionic and/or hydrophobic bonds on the spore. Among them, P36 and P22 were expected to be located on the very surface of the spore by immunological analysis. In the OL deficient mutant of B. megaterium ATCC 12872, MAE05, whose spore was lacking in these OL proteins and galactosamine-6-phosphate polymer, both P36 and P22 were present in the mother cell cytoplasm and deposited on the forespores, but they disappeared with the lysis of mother cells. An OL protein-releasing factor having proteolytic activity was detected in the culture supernatant at the late sporulating stage of both the wild-type and the mutant strains. But the factor could not act on the proteins of the mature spores and the forespores at t10 (tn indicates n hr after the end of exponential growth) of the wild-type strain. Moreover, P36 and P22 were found in the spores of a revertant of MAE05 which could form galactosamine-6-phosphate polymer, suggesting that this sugar polymer played the role in protecting the OL proteins against the protease-like substance after the deposition.

Presence of proteins derived from the vegetative cell membrane in the dormant spore coat of Bacillus subtilis

To confirm the presence of the outer spore membrane in dormant spore coats of Bacillus subtilis, the proteins from vegetative cell membrane and dormant spore coat fractions were compared by immunoblot assay with antibodies prepared against both preparations. The spore coat fraction contained at least 11 proteins antigenically identical to those in the vegetative cell membranes. Further, the cytochemical localization of the proteins derived from vegetative cell membrane in dormant spores was examined by an immunoelectron microscopy method with a colloidal gold-immunoglobulin G complex. The colloidal gold particles were observed in the coat region and around the core region of dormant spore. These results have provided evidence that some proteins from vegetative cell membrane remain in the dormant spore coat region of B. subtilis, although it is not clear whether the outer membrane persists as an intact functional entity or not.

Gene structure and precursor processing of a novel Bacillus subtilis spore coat protein

The gene for an unusual 8kD Bacillus subtilis spore coat polypeptide has been cloned and sequenced. It contains high percentages of proline, glycine and tyrosine, lacks thirteen amino acids, and is present as the carboxyl two-thirds of an open reading frame encoding a 12kD polypeptide. Two presumptive precursors which could be converted to the 8kD antigen by incubation with trypsin were found in extracts of cells or spores of a strain containing multiple copies of this gene. Large amounts of these coat antigens were also present in extracts of a germination-defective mutant which is altered in spore coat structure. There was little 8kD coat protein in the mutant, however, implying that processing is dependent on proper coat assembly. This gene was mapped to the metA region of the B. subtilis chromosome, a unique location as is true for other spore coat genes. Transcription and translation occurred late in sporulation (stage V) and the upstream region contained sequences similar to those found in other spore coat genes.

Immunoelectron microscopic studies on spore coat proteins of Bacillus megaterium

An immunochemical staining technique for the spore coat proteins of Bacillus megaterium ATCC 12872 was developed using colloidal gold as a second antibody. For reducing the non-specific immunogold binding and increasing the specific binding, the affinity-purified IgG was used as a first antibody. In sporulating cells at t10, gold particles were found not only in the spore coat but also in the mother cell cytoplasm, suggesting that some coat proteins were synthesized in the cytoplasm. Use of the specific affinity-purified antibody to 48K-protein demonstrated that this protein was one of the components of the outer coat.

Identification of the promoter for a spore coat protein gene in Bacillus subtilis and studies on the regulation of its induction at a late stage of sporulation

The cotA (pig) gene of Bacillus subtilis encodes a 65,000 Mr protein that is a component of the spore coat and is responsible for the brown pigment characteristic of colonies in which cells are undergoing sporulation. To study developmental regulation of the cotA gene, we identified its promoter and studied its transcription in a large number of mutants blocked at various stages of sporulation and germination. Deletion analysis showed that induction and efficient transcription of cotA required DNA sequences extending no more than 55 base pairs (bp) upstream (and no more than 130 bp downstream) from the 5' terminus of cotA mRNA. Transcription from the cotA promoter was found to be switched on at approximately the time (4 to 5 h after the onset of sporulation) of spore coat synthesis and deposition. Strikingly, this transcription was substantially inhibited in almost all asporogenous mutants blocked prior to the developmental stage (V) of spore coat formation. cotA transcription was also impaired in several stage V mutants but not in other stage V mutants or in mutants blocked in germination. The germination mutant gerE caused a several-fold overexpression of cotA. The dependence of cotA expression on so many genes required at early to intermediate stages of sporulation suggests that transcription of this spore coat gene is somehow coupled (directly or through several intervening steps) to a morphological or physiological feature(s) of the developing sporangium.

Promoter determining the timing and spatial localization of transcription of a cloned Streptomyces coelicolor gene encoding a spore-associated polypeptide

Streptomyces coelicolor is a filamentous, gram-positive bacterium that exhibits a complex cycle of morphological differentiation involving the formation of an aerial mycelium of multinucleoid hyphae which undergo septation to form long chains of spores. We report the identification of two proteins of 13 and 3 kilodaltons, designated SapA and SapB, respectively, that are produced during formation of the aerial mycelium and are found in assocation with purified, mature spores. We cloned the structural gene (sapA) for one of these spore-associated proteins. Nucleotide sequence analysis suggests that the 13-kilodalton polypeptide is derived from a larger pre- or preproprotein containing a leader sequence of 37 amino acids. Nuclease protection-hybridization analysis and experiments using the Vibrio harveyi, luciferase-encoding luxAB operon as a gene tag demonstrated that expression of sapA is controlled from a promoter contained within a region of less than 110 base pairs in length, whose transcription start site is located approximately 50 base pairs upstream from the initiation codon for the sapA open reading frame. Transcription of sapA was induced at the time of appearance of the aerial mycelium, and the level of sapA transcripts was significantly reduced in certain mutants blocked in aerial mycelium (bld) and or spore (whi) formation. As further evidence of the association of sapA transcription with morphological differentiation, experiments in which we monitored sapA transcription topographically by use of a sapA-luxAB operon fusion demonstrated a close spatial correlation between colony regions undergoing aerial mycelium formation and zones of sapA-promoted light emission.

Genes encoding spore coat polypeptides from Bacillus subtilis

Endospores of the Gram-positive bacterium Bacillus subtilis are encased in a tough protein shell, known as the coat, that consists of a dozen or more different polypeptides. We have cloned structural genes designated cotA, cotB, cotC and cotD that encode spore coat proteins of Mr 65,000, 59,000, 12,000 and 11,000, respectively. These genes were cloned by using as hybridization probes synthetic oligonucleotides that were designed on the basis of partial NH2-terminal sequence determinations of the purified coat proteins. To determine the location of the cot genes on the chromosome and to study their function genetically, we tagged each gene by insertion of a chloramphenicol-resistance determinant (cat) within its coding sequence. We then replaced each wild-type cot gene in the chromosome with the corresponding, insertionally inactivated gene. Genetic mapping experiments showed that cotA, cotB, cotC and cotD were located at 52 degrees, 290 degrees, 168 degrees and 200 degrees, respectively, on the B. subtilis chromosome. None of the cot::cat insertion mutants were Spo-, but spores of the cotD mutant were found to germinate somewhat more slowly than did wild-type spores, and the cotA mutant was found to be blocked in the appearance of the brown pigment characteristic of colonies of wild-type sporulating cells. Physical and genetic experiments established that cotA was identical to a previously identified gene called pig, known to be responsible for sporulation-associated pigment production. Spores from all four insertion mutants exhibited the wild-type pattern of coat polypeptides, except for the absence in each instance of the corresponding product of the cot gene that had been insertionally inactivated.

Comparative antigenicity of spore coat proteins from Bacillus species using antibody to spore coat proteins of Bacillus megaterium

Spore coat proteins obtained by extraction with sodium dodecylsulfate/dithiothreitol from six Bacillus spores were compared by immunoblot analysis using antibodies to spore coat proteins from two strains of B. megaterium. Although the extract from spores of each strain had heterogenous proteins with various molecular weights, there were some bands which cross-reacted with specific antibodies from B. megaterium spores. Specific antibody to 48K protein from B. megaterium ATCC 12872 cross-reacted with 17K protein from B. megaterium ATCC 19213, 13K protein from B. cereus and 50K protein from B. subtilis 60015 and B. subtilis NRRL B558. Also, specific antibody to 22K protein from the same strain cross-reacted with 22K and 17K proteins from B. megaterium ATCC 19213 and 13K protein from B. cereus T. Specific antibody to 17K protein from B. megaterium ATCC 19213 reacted with 22K and 19K proteins in addition to 17K protein of own strain, and it was cross-reactive with 16K protein from B. megaterium ATCC 12872, 19K and 27K proteins from B. thiaminolyticus, 13K protein from B. cereus.

Synthesis and deposition of spore coat proteins during sporulation of Bacillus megaterium

Rabbit (anti-spore coat protein) IgG was prepared by immunization with coat proteins extracted with sodium dodecyl sulfate and dithiothreitol from isolated spore coats of Bacillus megaterium ATCC 12872. Coat proteins were detected from 3 hr after the end of exponential growth (t3) in the mother cell cytoplasmic fraction by sandwich enzyme immunoassay using this antibody. The proteins in the forespore coat protein fraction increased from t3 and reached a plateau at t10. Immunoblot analysis for the coat proteins in sporulating cells revealed the sequential synthesis of various proteins in the mother cell cytoplasmic fraction and simultaneous deposition of the same proteins as in the forespore coat fraction. These results suggest that turnover of precursor proteins of the spore coat is very rapid if precursor proteins are produced and they are proteolytically processed to produce mature proteins. Specific antibody to the 48,000-dalton protein, which is a major protein, did not cross-react with any other major (36,000, 22,000, 19,500, and 17,500-dalton) proteins. Specific antibody to the 22,000-dalton protein did not cross-react with the 48,000, 36,000, 19,500, 17,500, and 16,000-dalton proteins, but did cross-react with the 44,000, 25,000, and 12,000-dalton proteins.

Restoration of vegetative penicillin-binding proteins during germination and outgrowth of Bacillus subtilis spores: relationship of individual proteins to specific cell cycle events

The order in which the vegetative penicillin-binding proteins (PBPs) are first synthesized and the rate of their return to normal levels during germination and outgrowth of Bacillus subtilis spores were determined. The rate of synthesis of most of the PBPs was much faster than that of the majority of other membrane proteins, which is consistent with the involvement of PBPs in biosynthesis of the rapidly expanding peptidoglycan. The pattern of PBP changes that occurred during the cell cycle, including sporulation, suggests a likely role for PBP 2A in cell elongation and a unique requirement for PBP 2B during both symmetric and asymmetric septum formation. PBP 3 is the only PBP that appears to be equally necessary for vegetative and cortical peptidoglycan synthesis.

Interaction of the Bacillus subtilis spore protoplast, cortex, ion-exchange and coatless forms with glutaraldehyde

Bacillus subtilis spores with altered ionic content were tested for their susceptibility to lysis with lysozyme or sodium nitrite following treatment with glutaraldehyde. The Ca-form was more sensitive to glutaraldehyde (pH 4.0 and pH 7.9) than the untreated or H-form. Removal of spore coat dramatically increased sensitivity of the spore to glutaraldehyde. Pretreatment of spores, the coats of which had been extensively removed, with glutaraldehyde (pH 7.9) reduced the rate of lysis by lysozyme and by sodium nitrite, whereas glutaraldehyde at pH 4.0 had little effect. Glutaraldehyde pretreatment (pH 4.0 and pH 7.9) reduced the amount of hexosamine released by lysozyme but not by nitrite from isolated cortical fragments. Spore protoplasts were more susceptible to 0.01% (w/v) glutaraldehyde at pH 4.0 and isolated spore coats adsorbed alkaline glutaraldehyde more rapidly. These results are discussed in terms of a possible mode of action of glutaraldehyde on the bacterial spore.

Characterization of Bacillus subtilis mutants with a temperature-sensitive intracellular protease

A colony screening procedure was devised to detect Bacillus subtilis mutants containing temperature-sensitive trypsin-like intracellular protease activity. The enzyme was characterized as a non-sulfhydryl serine protease on the basis of inhibitor studies. It was also inhibited by D- or L-histidine but not by any other amino acid tested. The long-term survival at 45 degrees C of these mutants in a minimal salts medium was decreased, with rapid lysis occurring within 24 h. A D-histidine function in long-term survival and inhibition accounted for the presence of additional protease mutants among survivors of histidine auxotrophs selected for their ability to utilize D-histidine. In addition to being lysed when incubated at 45 degrees C under nongrowth conditions, all of the protease mutants had a decreased rate of protein turnover and produced spores deficient in a major low-molecular-weight spore coat polypeptide. The morphology of the undercoat layers was altered, but there was no effect on spore heat resistance or on germination. The missing spore coat polypeptide appeared to be processed from a larger precursor by cleavage to produce N-terminal histidine. A defect in this protease could account for the lack of processing and thus the absence of this polypeptide in spore coats.

Manganese binding and oxidation by spores of a marine bacillus

Mature, dormant spores of a marine bacillus, SG-1, bound and oxidized (precipitated) manganese on their surfaces. The binding and oxidation occurred under dormant conditions, with mature spores suspended in natural seawater. These heat-stable spores were formed in the absence of added manganese in the growth medium. The rate and amount of manganese bound by SG-1 spores was a function of spore concentration. Temperatures greater than 45 degrees C, pH values below 6.5, or the addition of EDTA or the metabolic inhibitors sodium azide, potassium cyanide, and mercuric chloride inhibited manganese binding and oxidation. However, SG-1 spores bound and oxidized manganese after treatment with glutaraldehyde, formaldehyde, ethylene oxide gas, or UV light, all of which killed the spores. Manganese oxidation never occurred in the absence of manganese binding to spores. The data suggest that Mn2+ was complexed by a spore component, perhaps an exosporium or a spore coat protein: once bound, the manganese was rapidly oxidized.

Characterization, purification and synthesis of spore-coat protein in Bacillus megaterium KM

The spore-coat fraction from Bacillus megaterium KM, when prepared by extraction of lysozyme-digested integuments with SDS (sodium dodecyl sulphate) and urea, contains three N-terminal residues and a major component of apparent mol.wt. 17500. Electron microscopy of this fraction shows it to consist of an ordered multilamellar structure similar to that which forms the coat region of intact spores. The 17500-dalton protein, which has been purified to homogeneity, has an N-terminal methionine residue, has high contents of glycine, proline, cysteine and acidic amino acids and readily polymerized even in the presence of thiol-reducing agents. It is first synthesized between late Stage IV and early Stage V, which correlates with the morphological appearance of spore coat. Before Stage VI the 17500-dalton protein is extractable from sporangia by SDS in the absence of thiol-reducing reagents. Between Stage VI and release of mature spores the protein becomes resistant to extraction by SDS unless it is supplemented by a thiol-reducing reagent. In addition to that of the spore-coat protein, the timing of synthesis of all the integument proteins was analysed by SDS/polyacrylamide-gel electrophoresis and non-equilibrium pH-gradient electrophoresis. Several integument proteins are conservatively synthesized from as early as 1h after the end of exponential growth (t1), which may reflect protein incorporation into the spore outer membrane.

Coat protein synthesis during sporulation of Bacillus subtilis: immunological detection of soluble precursors to the 12,200-dalton spore coat protein

Antibody specific to the 12,200-dalton spore coat protein of Bacillus subtilis was used to detect the synthesis of cross-reacting material during sporulation. Cross-reacting protein was first detected by immunoprecipitation after 4 h of development and represented at least 1 to 2% of the total soluble protein synthesis at 5.5 h. A polypeptide of 21,000 daltons was detected in immunoprecipitates by gel electrophoresis. This polypeptide did not accumulate in sporulating cells and was rapidly turned over at the time of coat deposition. In contrast, a 32,000-dalton polypeptide reacted with antibody when unlabeled cell protein was denatured with sodium dodecyl sulfate, separated by gel electrophoresis, and transferred to nitrocellulose paper. This polypeptide was not detected during cell growth or the first 3.5 h of development but was found to accumulate in sporulating cells at 5.5 h. The lack of detection of this polypeptide by immunoprecipitation of undenatured protein indicates that the antigenic sites which cross-reacted with antibody to the 12,200-dalton protein sequence were not exposed unless the molecular conformation was altered. The 32,000-dalton protein may be a primary translation product which is proteolytically processed into mature spore coat protein via a 21,000-dalton intermediate.

A cloned gene that is turned on at an intermediate stage of spore formation in Bacillus subtilis

Cells of Bacillus subtilis synthesize a relatively long-lived ribonucleic acid (RNA) of about 300 bases during the course of spore formation. This transcript does not appear until an intermediate stage (III or IV) of development but is the predominant sporulation-specific transcript among RNAs of discrete size in late (stages IV to VI) developing cells. Appearance of the 300-base RNA is under sporulation control as this transcript could not be detected in cells of an early-blocked sporulation mutant (Spo0A). We have located the coding sequence for the 300-base RNA within a cloned chromosomal segment from the purA-cysA region that was previously shown to contain a cluster of genes that are actively transcribed during sporulation. The coding sequence for the 300-base RNA (designated as the 0.3 kb gene) mapped between a gene (veg) that was actively transcribed during growth and development and a gene (0.4 kb) that was turned on at the onset of sporulation. Although clustered within a small segment of the chromosome, the veg, 0.3 kb, and 0.4 kb transcription units exhibited, therefore, distinct patterns of temporally programmed gene expression. Models for the activation of the 0.3 kb gene at an intermediate stage of development are discussed.

Acid-soluble spore proteins of Bacillus subtilis

Acid-soluble spore proteins (ASSPs) comprise about 5% of the total protein of mature spores of different Bacillus subtilis strains. They consist of three abundant species, alpha, beta, and gamma, four less abundant species, and several minor species, alpha, beta, and gamma make up about 18, 18 and 36%, respectively, of the total ASSPs of strain 168, have molecular weights of 5,900, 5,9000, and 11,000, respectively, and resemble the major (A, C, and B) components of Bacillus megaterium ASSPs in several respects, including sensitivity to a specific B. megaterium spore endopeptidase. However, they have pI's of 6.58, 6.67, and 7.96, all lower than those of any of the B. megaterium ASSPs. Although strains varied in the proportions of different ASSPs, to overall patterns seen on gel electrophoresis are constant. ASSPs are located interior to the cortex, presumably in the spore cytoplasm, and are synthesized during sporulation and degraded during germination.