Analysis of the variable endpoints generated by one-ended transposition of Tn21

Insertion sequence-caused large-scale rearrangements in the genome of Escherichia coli

A majority of large-scale bacterial genome rearrangements involve mobile genetic elements such as insertion sequence (IS) elements. Here we report novel insertions and excisions of IS elements and recombination between homologous IS elements identified in a large collection of Escherichia coli mutation accumulation lines by analysis of whole genome shotgun sequencing data. Based on 857 identified events (758 IS insertions, 98 recombinations and 1 excision), we estimate that the rate of IS insertion is 3.5 × 10(-4) insertions per genome per generation and the rate of IS homologous recombination is 4.5 × 10(-5) recombinations per genome per generation. These events are mostly contributed by the IS elements IS1, IS2, IS5 and IS186 Spatial analysis of new insertions suggest that transposition is biased to proximal insertions, and the length spectrum of IS-caused deletions is largely explained by local hopping. For any of the ISs studied there is no region of the circular genome that is favored or disfavored for new insertions but there are notable hotspots for deletions. Some elements have preferences for non-coding sequence or for the beginning and end of coding regions, largely explained by target site motifs. Interestingly, transposition and deletion rates remain constant across the wild-type and 12 mutant E. coli lines, each deficient in a distinct DNA repair pathway. Finally, we characterized the target sites of four IS families, confirming previous results and characterizing a highly specific pattern at IS186 target-sites, 5'-GGGG(N6/N7)CCCC-3'. We also detected 48 long deletions not involving IS elements.

The Tn3-family of Replicative Transposons

Transposons of the Tn3 family form a widespread and remarkably homogeneous group of bacterial transposable elements in terms of transposition functions and an extremely versatile system for mediating gene reassortment and genomic plasticity owing to their modular organization. They have made major contributions to antimicrobial drug resistance dissemination or to endowing environmental bacteria with novel catabolic capacities. Here, we discuss the dynamic aspects inherent to the diversity and mosaic structure of Tn3-family transposons and their derivatives. We also provide an overview of current knowledge of the replicative transposition mechanism of the family, emphasizing most recent work aimed at understanding this mechanism at the biochemical level. Previous and recent data are put in perspective with those obtained for other transposable elements to build up a tentative model linking the activities of the Tn3-family transposase protein with the cellular process of DNA replication, suggesting new lines for further investigation. Finally, we summarize our current view of the DNA site-specific recombination mechanisms responsible for converting replicative transposition intermediates into final products, comparing paradigm systems using a serine recombinase with more recently characterized systems that use a tyrosine recombinase.

Mobility and generation of mosaic non-autonomous transposons by Tn3-derived inverted-repeat miniature elements (TIMEs)

Functional transposable elements (TEs) of several Pseudomonas spp. strains isolated from black shale ore of Lubin mine and from post-flotation tailings of Zelazny Most in Poland, were identified using a positive selection trap plasmid strategy. This approach led to the capture and characterization of (i) 13 insertion sequences from 5 IS families (IS3, IS5, ISL3, IS30 and IS1380), (ii) isoforms of two Tn3-family transposons – Tn5563a and Tn4662a (the latter contains a toxin-antitoxin system), as well as (iii) non-autonomous TEs of diverse structure, ranging in size from 262 to 3892 bp. The non-autonomous elements transposed into AT-rich DNA regions and generated 5- or 6-bp sequence duplications at the target site of transposition. Although these TEs lack a transposase gene, they contain homologous 38-bp-long terminal inverted repeat sequences (IRs), highly conserved in Tn5563a and many other Tn3-family transposons. The simplest elements of this type, designated TIMEs (Tn3 family-derived Inverted-repeat Miniature Elements) (262 bp), were identified within two natural plasmids (pZM1P1 and pLM8P2) of Pseudomonas spp. It was demonstrated that TIMEs are able to mobilize segments of plasmid DNA for transposition, which results in the generation of more complex non-autonomous elements, resembling IS-driven composite transposons in structure. Such transposon-like elements may contain different functional genetic modules in their core regions, including plasmid replication systems. Another non-autonomous element “captured” with a trap plasmid was a TIME derivative containing a predicted resolvase gene and a res site typical for many Tn3-family transposons. The identification of a portable site-specific recombination system is another intriguing example confirming the important role of non-autonomous TEs of the TIME family in shuffling genetic information in bacterial genomes. Transposition of such mosaic elements may have a significant impact on diversity and evolution, not only of transposons and plasmids, but also of other types of mobile genetic elements.

Suicidal autointegration of sleeping beauty and piggyBac transposons in eukaryotic cells

Transposons are discrete segments of DNA that have the distinctive ability to move and replicate within genomes across the tree of life. 'Cut and paste' DNA transposition involves excision from a donor locus and reintegration into a new locus in the genome. We studied molecular events following the excision steps of two eukaryotic DNA transposons, Sleeping Beauty (SB) and piggyBac (PB) that are widely used for genome manipulation in vertebrate species. SB originates from fish and PB from insects; thus, by introducing these transposons to human cells we aimed to monitor the process of establishing a transposon-host relationship in a naïve cellular environment. Similarly to retroviruses, neither SB nor PB is capable of self-avoidance because a significant portion of the excised transposons integrated back into its own genome in a suicidal process called autointegration. Barrier-to-autointegration factor (BANF1), a cellular co-factor of certain retroviruses, inhibited transposon autointegration, and was detected in higher-order protein complexes containing the SB transposase. Increasing size sensitized transposition for autointegration, consistent with elevated vulnerability of larger transposons. Both SB and PB were affected similarly by the size of the transposon in three different assays: excision, autointegration and productive transposition. Prior to reintegration, SB is completely separated from the donor molecule and followed an unbiased autointegration pattern, not associated with local hopping. Self-disruptive autointegration occurred at similar frequency for both transposons, while aberrant, pseudo-transposition events were more frequently observed for PB.

Integrase-mediated recombination of the veb1 gene cassette encoding an extended-spectrum β-lactamase

The veb1 gene cassette encodes the extended spectrum β-lactamase, VEB-1 that is increasingly isolated from worldwide Gram-negative rods. Veb1 is commonly inserted into the variable region of different class 1 integrons in which it is always associated with a downstream-located aadB gene cassette encoding an aminoglycoside adenylyltransferase. In Pseudomonas aeruginosa, the majority of veb1-containing integrons also carry an insertion sequence, IS1999 that is inserted upstream of the veb1 gene cassette and disrupts the integron specific recombination site, attI1. Investigation of the recombination properties of the sites surrounding veb1 revealed that insertion of IS1999 reduces significantly the recombination frequency of attI1 and that veb1 attC is not efficient for recombination in contrast to aadB attC. Subsequent sequence optimisation of veb1 attC by mutagenesis, into a more consensual attC site resembling aadB attC, successfully improved recombination efficiency. Overall, this work gives some insights into the organisation of veb1-containing integrons. We propose that IS1999 and the nature of veb1 attC stabilize the veb1 gene cassette environment likely by impairing recombination events upstream or downstream of veb1, respectively.

Analysis of antibiotic resistance regions in Gram-negative bacteria

Antibiotic resistance in Gram-negative bacteria is often due to the acquisition of resistance genes from a shared pool. In multiresistant isolates these genes, together with associated mobile elements, may be found in complex conglomerations on plasmids or on the chromosome. Analysis of available sequences reveals that these multiresistance regions (MRR) are modular, mosaic structures composed of different combinations of components from a limited set arranged in a limited number of ways. Components common to different MRR provide targets for homologous recombination, allowing these regions to evolve by combinatorial evolution, but our understanding of this process is far from complete. Advances in technology are leading to increasing amounts of sequence data, but currently available automated annotation methods usually focus on identifying ORFs and predicting protein function by homology. In MRR, where the genes are often well characterized, the challenge is to identify precisely which genes are present and to define the boundaries of complete and fragmented mobile elements. This review aims to summarize the types of mobile elements involved in multiresistance in Gram-negative bacteria and their associations with particular resistance genes, to describe common components of MRR and to illustrate methods for detailed analysis of these regions.

Molecular structure and translocation of a multiple antibiotic resistance region of a Psychrobacter psychrophilus permafrost strain

A Psychrobacter psychrophilus strain resistant to tetracycline and streptomycin was isolated from a 15,000-35,000-year-old permafrost subsoil sediment sampled from the coast of the Eastern-Siberian Sea. The genes conferring antibiotic resistance were localized on an c. 30-kb pKLH80 plasmid. It was shown that the antibiotic resistance region of this plasmid has a mosaic structure and contains closely linked streptomycin resistance (strA-strB) and tetracycline resistance [tetR-tet(H)] genes, followed by a novel IS element (ISPpy1) belonging to the IS3 family. Both the strA-strB and tetR-tet(H) genes of pKLH80 were highly similar to those found in modern clinical bacterial isolates. It was shown that the ISPpy1 element of pKLH80 can direct translocation of the adjacent antibiotic resistance genes to different target plasmids, either by one-ended transposition or by formation of a composite transposon resulting from the insertion of the ISPpy1 second copy at the other side of the antibiotic resistance region. Thus, our data demonstrate that clinically important antibiotic resistance genes originated long before the introduction of antibiotics into clinical practice and confirm an important role of horizontal gene transfer in the distribution of these genes in natural bacterial populations.

Different pathways to acquiring resistance genes illustrated by the recent evolution of IncW plasmids

DNA sequence analysis of five IncW plasmids (R388, pSa, R7K, pIE321, and pIE522) demonstrated that they share a considerable portion of their genomes and allowed us to define the IncW backbone. Among these plasmids, the backbone is stable and seems to have diverged recently, since the overall identity among its members is higher than 95%. The only gene in which significant variation was observed was trwA; the changes in the coding sequence correlated with parallel changes in the corresponding TrwA binding sites at oriT, suggesting a functional connection between both sets of changes. The present IncW plasmid diversity is shaped by the acquisition of antibiotic resistance genes as a consequence of the pressure exerted by antibiotic usage. Sequence comparisons pinpointed the insertion events that differentiated the five plasmids analyzed. Of greatest interest is that a single acquisition of a class I integron platform, into which different gene cassettes were later incorporated, gave rise to plasmids R388, pIE522, and pSa, while plasmids R7K and pIE321 do not contain the integron platform and arose in the antibiotic world because of the insertion of several antibiotic resistance transposons.

Analysis of DNA processing reactions in bacterial conjugation by using suicide oligonucleotides

Protein TrwC is the conjugative relaxase responsible for DNA processing in plasmid R388 bacterial conjugation. TrwC has two catalytic tyrosines, Y18 and Y26, both able to carry out cleavage reactions using unmodified oligonucleotide substrates. Suicide substrates containing a 3'-S-phosphorothiolate linkage at the cleavage site displaced TrwC reaction towards covalent adducts and thereby enabled intermediate steps in relaxase reactions to be investigated. Two distinct covalent TrwC-oligonucleotide complexes could be separated from noncovalently bound protein by SDS-PAGE. As observed by mass spectrometry, one complex contained a single, cleaved oligonucleotide bound to Y18, whereas the other contained two cleaved oligonucleotides, bound to Y18 and Y26. Analysis of the cleavage reaction using suicide substrates and Y18F or Y26F mutants showed that efficient Y26 cleavage only occurs after Y18 cleavage. Strand-transfer reactions carried out with the isolated Y18-DNA complex allowed the assignment of specific roles to each tyrosine. Thus, only Y18 was used for initiation. Y26 was specifically used in the second transesterification that leads to strand transfer, thus catalyzing the termination reaction that occurs in the recipient cell.

Genetics and expression of the carbapenem-hydrolyzing oxacillinase gene blaOXA-23 in Acinetobacter baumannii

The genetic structures surrounding the plasmid-carried blaOXA-23 oxacillinase gene, encoding resistance to carbapenems, were studied in Acinetobacter baumannii. ISAba1 and the novel element ISAba4 were detected upstream of the blaOXA-23 gene, providing promoter sequences for its expression. These insertion elements were likely involved in transposition processes at the origin of acquisition of this beta-lactamase gene.

ISEcp1B-mediated transposition of blaCTX-M in Escherichia coli

Several expanded-spectrum beta-lactamase bla(CTX-M) genes are associated with ISEcp1-like elements in Enterobacteriaceae. We found that ISEcp1B was able to mobilize the adjacent bla(CTX-M-19) gene by a transpositional mechanism in Escherichia coli by recognizing a variety of DNA sequences as right inverted repeats.

Insertion sequence ISEcp1B is involved in expression and mobilization of a bla(CTX-M) beta-lactamase gene

The genetic structures (ca. 10-kb DNA fragment) surrounding the plasmid-borne extended-spectrum beta-lactamase bla(CTX-M-19) gene in a Klebsiella pneumoniae clinical isolate were determined. This beta-lactamase gene was part of a 4,797-bp transposon inserted inside orf1 of Tn1721. Inside this transposon, bla(CTX-M-19) was bracketed upstream and downstream by insertion sequences ISE cp1B and IS903D, respectively, and further downstream by a truncated gene encoding an outer membrane protein for iron transport. The single-copy ISEcp1B element was probably involved alone in the mobilization process that led to a 5-bp duplication at the target site of the transposed fragment. This mobilization event probably involved one inverted repeat of ISE cp1B and a second sequence farther away, resembling its second inverted repeat. Additionally, ISEcp1B provided -35 and -10 promoter sequences, contributing to the high-level expression of the bla(CTX-M-19) gene. Southern blot analysis failed to identify a reservoir of ISEcp1-like sequences among a series of gram-negative and gram-positive bacterial species usually found in the skin and intestinal human floras. The ability of ISEcp1-like elements to mobilize and to promote the expression of beta-lactamase genes may explain, in part, the current spread of CTX-M-type enzymes worldwide.

Site-specific integration of genes into hot spots for recombination flanking aadA in Tn21 transposons

Tn21-related transposons are widespread among bacteria and carry various resistance determinants at preferential sites, hs1 and hs2. In an in vivo integrative recombination assay it was demonstrated that these hot spots direct the integration of aminoglycoside resistance genes like aadB from Klebsiella pneumoniae and aacAI from Serratia marcescens, in a recA- background. The maximum required recognition sequence which must be present in both the donor and recipient plasmids is 5' CTAAAACAAAGTTA 3' (hs2). The double-site-specific recombination occurred with a frequency of 10(-5)-10(-6). The resulting structures include not only replicon fusion products but also more complex structures carrying two copies of the donor plasmid or simply the donor gene flanked by hs elements. hs1 and hs2 are thought to act as recognition sites for a transacting site-specific recombinase. By the use of Tn21 deletion derivatives, it has been shown that the recombinase is not encoded by Tn21. This new integrative recombination system is involved in the acquisition of new genes by Tn21-related transposons and their spread among bacterial populations.

Construction and properties of a family of pACYC184-derived cloning vectors compatible with pBR322 and its derivatives

A family of cloning vectors derived from plasmid pACYC184 and, therefore, compatible with pBR322 and its derivatives (especially the pUC family of vectors), is described. They all contain a multiple cloning site (MCS) and the lacZ alpha reporter gene for easy cloning. They have been grouped in three sets: (i) six of the vectors contain a chloramphenicol-resistance (CmR)-encoding gene and each a different MCS with 16 unique restriction sites overall; (ii) another six vectors contain a kanamycin-resistance (KmR)-encoding gene and the same six MCS; and (iii) two CmR vectors that contain the SP6 and T7 promoters flanking the MCS and lacZ alpha reporter gene of pUC18/19.

The Tn21 subgroup of bacterial transposable elements

The Tn3 family of transposable elements is probably the most successful group of mobile DNA elements in bacteria: there are many different but related members and they are widely distributed in gram-negative and gram-positive bacteria. The Tn21 subgroup of the Tn3 family contains closely related elements that provide most of the currently known variation in Tn3-like elements in gram-negative bacteria and that are largely responsible for the problem of multiple resistance to antibiotics in these organisms. This paper reviews the structure, the mechanism of transposition, the mode of acquisition of accessory genes, and the evolution of these elements.

Effects of variation of inverted-repeat sequences on reactions mediated by the transposase of Tn21

The frequencies of one-ended transposition and normal transposition of derivatives of Tn21 that contain mutant inverted-repeat sequences (IRs) have been measured. In general, there was a linear relationship between the log of the frequency of one-ended transposition of a mutant IR and the log of the frequency of normal transposition of an element flanked by a wild-type IR at one end and by the mutant IR at the other. This implied that one-ended and normal transposition share the rate-limiting step that determines the frequency of transposition and that both IRs are involved in the rate-limiting step in normal transposition. Surprisingly, it was found that only the outer 18 base pairs of the IR of Tn21 engaged accurately in both one-ended and normal transposition, at about 1% of the frequency of the wild-type IR.