Identification and characterization of the products of six region III flagellar genes (flaAII.3 through flaQII) of Salmonella typhimurium

The FliK protein and flagellar hook-length control

The bacterial flagellum is a highly complex prokaryotic organelle. It is the motor that drives bacterial motility, and despite the large amount of energy required to make and operate flagella, motile organisms have a strong adaptive advantage. Flagellar biogenesis is both complex and highly coordinated and it typically involves at least three two-component systems. Part of the flagellum is a type III secretion system, and it is via this structure that flagellar components are exported. The assembly of a flagellum occurs in a number of stages, and the "checkpoint control" protein FliK functions in this process by detecting when the flagellar hook substructure has reached its optimal length. FliK then terminates hook export and assembly and transmits a signal to begin filament export, the final stage in flagellar biosynthesis. As yet the exact mechanism of how FliK achieves this is not known. Here we review what is known of the FliK protein and discuss the evidence for and against the various hypotheses that have been proposed in recent years to explain how FliK controls hook length, FliK as a molecular ruler, the measuring cup theory, the role of the FliK N terminus, the infrequent molecular ruler theory, and the molecular clock theory.

Deletion analysis of the flagellar switch protein FliG of Salmonella

The flagellar motor/switch complex, consisting of the three proteins FliG, FliM, and FliN, plays a central role in bacterial motility and chemotaxis. We have analyzed FliG, using 10-amino-acid deletions throughout the protein and testing the deletion clones for their motility and dominance properties and for interaction of the deletion proteins with the MS ring protein FliF. Only the N-terminal 46 amino acids of FliG (segments 1 to 4) were important for binding to FliF; consistent with this, an N-terminal fragment consisting of residues 1 to 108 bound FliF strongly, whereas a C-terminal fragment consisting of residues 109 to 331 did not bind FliF at all. Deletions in the region from residues 37 to 96 (segments 4 to 9), 297 to 306 (segment 30), and 317 to 326 (segment 32) permitted swarming, though not at wild-type levels; all other deletions caused paralyzed or, more commonly, nonflagellate phenotype. Except for those near the N terminus, deletions had a dominant negative effect on wild-type cells.

Effect of cellular level of FliK on flagellar hook and filament assembly in Salmonella typhimurium

Frameshift mutations in the fliK gene of Salmonella result in abnormal elongation of the hook and the failure to assemble filament (polyhook phenotype). Second-site suppressor mutations restore filament assembly, but the cells often remain defective in hook-length control (polyhook-filament phenotype). Where the suppressor mutations are intragenic, the second mutation restores the original frame, generating a region of frameshifted sequence, but restoring the natural C terminus. Some of these frameshifted sequences contain a UGA (opal) termination codon. These cells have few flagella and swarm poorly. We suspected that readthrough of UGA by tRNATrp might be the reason for the partial function. When the UGA codon was changed to the Trp codon UGG, flagellar assembly and function were restored to wild-type levels. Conversely, underexpression of the wild-type fliK gene, achieved by changing the sole Trp codon in the sequence (Trp271) to UGA, decreased both the number of flagella and the ability to swarm. These results validate the readthrough hypothesis and indicate that low levels of FliK sustain some degree of flagellation and motility. At low levels of FliK, most flagella had polyhooks. With increasing amounts, the morphology progressively changed to polyhook-filament, and eventually to wild-type hook-filament. When FliK was overproduced, the hook length was slightly shorter (46(+/-7) nm) than that of the wild-type strain (55(+/-9) nm). FliK levels were measured by immunoblotting. Wild-type levels were about 40 to 80 molecules/cell. FliK synthesized by UGA readthrough could be detected when overproduced from plasmid fliK-W271opal, and the levels indicated a probability of readthrough of 0.002 to 0.01. This value was used to estimate the cellular level of underexpressed FliK, which could partly restore function to a fliK mutant, at about 0.07 to 0.8 molecule/cell. These results suggest that FliK does not form a large structure in the cytoplasm and may function as a regulatory protein for protein export. A model for hook-length control is presented that involves feedback from the assembly point to the export apparatus.

Structural and genetic analysis of a mutant of Rhodobacter sphaeroides WS8 deficient in hook length control

Motility in the photosynthetic bacterium Rhodobacter sphaeroides is achieved by the unidirectional rotation of a single subpolar flagellum. In this study, transposon mutagenesis was used to obtain nonmotile flagellar mutants from this bacterium. We report here the isolation and characterization of a mutant that shows a polyhook phenotype. Morphological characterization of the mutant was done by electron microscopy. Polyhooks were obtained by shearing and were used to purify the hook protein monomer (FlgE). The apparent molecular mass of the hook protein was 50 kDa. N-terminal amino acid sequencing and comparisons with the hook proteins of other flagellated bacteria indicated that the Rhodobacter hook protein has consensus sequences common to axial flagellar components. A 25-kb fragment from an R. sphaeroides WS8 cosmid library restored wild-type flagellation and motility to the mutant. Using DNA adjacent to the inserted transposon as a probe, we identified a 4.6-kb SalI restriction fragment that contained the gene responsible for the polyhook phenotype. Nucleotide sequence analysis of this region revealed an open reading frame with a deduced amino acid sequence that was 23.4% identical to that of FliK of Salmonella typhimurium, the polypeptide responsible for hook length control in that enteric bacterium. The relevance of a gene homologous to fliK in the uniflagellated bacterium R. sphaeroides is discussed.

Distinct regions of bacterial flagellar switch protein FliM interact with FliG, FliN and CheY

The FliG, FliM, and FliN proteins of the bacterial flagellar motor are believed to interact with one another to form the switch complex, which in turn is thought to interact with one of the chemotaxis proteins, CheY. In particular, FliM appears to be an intermediary between CheY and FliG: the current model suggests that CheY, when phosphorylated (CheY-P), binds to FliM and produces a conformational change in FliM that is propagated to FliG. The result of these interactions is to induce clockwise rotation of the flagellar motors and tumbling of the cell. Various genetic and biochemical studies have provided evidence that the switch proteins associate with each other and that CheY-P binds to FliM. Here, we have used affinity blotting to obtain direct evidence of interaction between Salmonella typhimurium FliM and FliN, FliM and FliG, and FliM and CheY-P. We have also examined the ability of various FliM deletion and truncation mutant proteins to bind to FliN, FliG, and CheY-P. From these data, we conclude that distinct regions of the FliM protein bind to each of these other proteins. We propose a model in which the N-terminal region of FliM binds to CheY-P, the middle region of FliM binds to FliG, and the C-terminal region binds to FliN.

The FliO, FliP, FliQ, and FliR proteins of Salmonella typhimurium: putative components for flagellar assembly

The flagellar genes fliO, fliP, fliQ, and fliR of Salmonella typhimurium are contiguous within the fliLMNOPQR operon. They are needed for flagellation but do not encode any known structural or regulatory components. They may be involved in flagellar protein export, which proceeds by a type III export pathway. The genes have been cloned and sequenced. The sequences predict proteins with molecular masses of 13,068, 26,755, 9,592, and 28,933 Da, respectively. All four gene products were identified experimentally; consistent with their high hydrophobic residue content, they segregated with the membrane fraction. From N-terminal amino acid sequence analysis, we conclude that fliO starts immediately after fliN rather than at a previously proposed site downstream. FliP existed in two forms, a 25-kDa form and a 23-kDa form. N-terminal amino acid analysis of the 23-kDa form demonstrated that it had undergone cleavage of a signal peptide--a rare process for prokaryotic cytoplasmic membrane proteins. Site-directed mutation at the cleavage site resulted in impaired processing, which reduced, but did not eliminate, complementation of a fliP mutant in swarm plate assays. A cloned fragment encoding the mature form of the protein could also complement the fliP mutant but did so even more poorly. Finally, when the first transmembrane span of MotA (a cytoplasmic membrane protein that does not undergo signal peptide cleavage) was fused to the mature form of FliP, the fusion protein complemented very weakly. Higher levels of synthesis of the mutant proteins greatly improved function. We conclude that, for insertion of FliP into the membrane, cleavage is important kinetically but not absolutely required.

Deletion analysis of the FliM flagellar switch protein of Salmonella typhimurium

The flagellar switch of Salmonella typhimurium and Escherichia coli is composed of three proteins, FliG, FliM, and FliN. The switch complex modulates the direction of flagellar motor rotation in response to information about the environment received through the chemotaxis signal transduction pathway. In particular, chemotaxis protein CheY is believed to bind to switch protein FliM, inducing clockwise filament rotation and tumbling. To investigate the function of FliM and its interactions with FliG and FliN, we engineered a series of 34 FliM deletion mutant proteins, each lacking a different 10-amino-acid segment. We have determined the phenotype associated with each mutant protein, the ability of each mutant protein to interfere with the motility of wild-type cells, and the effect of additional FliG and FliN on the function of selected FliM mutant proteins. Overall, deletions at the N terminus produced a counterclockwise switch bias, deletions in the central region of the protein produced poorly motile or nonflagellate cells, and deletions near the C terminus produced only nonflagellate cells. On the basis of this evidence and the results of a previous study of spontaneous FliM mutants (H. Sockett, S. Yamaguchi, M. Kihara, V. M. Irikura, and R. M. Macnab, J. Bacteriol. 174:793-806, 1992), we propose a division of the FliM protein into four functional regions: an N-terminal region primarily involved in switching, an extended N-terminal region involved in switching and assembly, a middle region involved in switching and motor rotation, and a C-terminal region primarily involved in flagellar assembly.

Analysis of a FliM-FliN flagellar switch fusion mutant of Salmonella typhimurium

In the course of an analysis of the three genes encoding the flagellar motor switch, we isolated a paralyzed mutant whose defect proved to be a 4-bp deletion of the ribosome binding sequence of the fliN switch gene (V. M. Irikura, M. Kihara, S. Yamaguchi, H. Sockett, and R. M. Macnab, J. Bacteriol. 175:802-810,1993). This sequence lies just before the 3' end of the coding sequence of the upstream fliM switch gene, in the same operon. This mutant readily gave rise to pseudorevertants which, though much less motile than the wild type, did exhibit significant swarming. One such pseudorevertant was found to contain a compensating frameshift such that the fliM and fliN genes were placed in frame, coding for an essentially complete FliM-FliN protein fusion. Minicell analysis demonstrated that, as expected, the parental mutant synthesized an essentially full-length FliM protein but no detectable FliN. The pseudorevertant, in contrast, synthesized a protein with the predicted size for the FliM-FliN fusion protein and no detectable FliM or FliN. Immunoblotting of minicells with antibodies against FliM and FliN confirmed the identities of these various proteins. Immunoblotting of book-basal-body complexes from the wild-type strain gave a strong signal for the three switch proteins FliG, FliM, and FliN. Complexes from the FliM-FliN fusion mutant gave a strong signal for FliG but no signal for either FIiM or FliN; a moderately strong signal for the FliM-FliN fusion protein was seen with the anti-FliM antibody, and a weaker signal was seen with the anti-FliN antibody. The cytoplasmic C ring of the structure, which is seen consistently in electron microscopy of wild-type complexes and which is known to contain the FliM and FliN proteins, was much more labile in the FliM-FliN fusion mutant, giving a fragmented and variable appearance or being completely absent. Complementation data indicated that wild-type FliM had a mild dominant negative effect over the fusion protein, that wild-type FliN and the fusion protein work much better than the fusion protein alone, and that wild-type FliM and FliN together have no major positive or negative effect on the function of the fusion protein. We interpret these data to mean that the FliM-FliN fusion protein incorporates into structure but less stably than do the FliM and FliN proteins separately, that wild-type FliM tends to displace the fusion protein, and that wild-type FliN can supplement the FliN domain of the fusion protein without displacing the FliM domain. The data support, but do not prove, a model in which FliM and FliN in the wild-type switch complex are stationary with respect to each other.

Mutations in fliK and flhB affecting flagellar hook and filament assembly in Salmonella typhimurium

Mutations in the fliK gene of Salmonella typhimurium commonly cause failure to terminate hook assembly and initiate filament assembly (polyhook phenotype). Polyhook mutants give rise to pseudorevertants which are still defective in hook termination but have recovered the ability to assemble filament (polyhook-filament phenotype). The polyhook mutations have been found to be either frameshift or nonsense, resulting in truncation of the C terminus of FliK. Intragenic suppressors of frameshift mutations were found to be ones that restored the original frame (and therefore the C-terminal sequence), but in most cases with substantial loss of natural sequence and sometimes the introduction of artificial sequence; in no cases did intragenic suppression occur when significant disruption remained within the C-terminal region. By use of a novel PCR protocol, in-frame deletions affecting the N-terminal and central regions of FliK were constructed and the resulting phenotypes were examined. Small deletions resulted in almost normal hook length control and almost wild-type swarming. Larger deletions resulted in loss of control of hook length and poor swarming. The largest deletions severely affected filament assembly as well as hook length control. Extragenic suppressors map to an unlinked gene, flhB, which encodes an integral membrane protein (T. Hirano, S. Yamaguchi, K. Oosawa, and S.-I. Aizawa, J. Bacteriol. 176:5439-5449, 1994; K. Kutsukake, T. Minamino, and T. Yokoseki, J. Bacteriol. 176:7625-7629, 1994). They were either point mutations in the C-terminal cytoplasmic region of FlhB or frameshift or nonsense mutations close to the C terminus. The processes of hook and filament assembly and the roles of FliK and FlhB in these processes are discussed in light of these and other available data. We suggest that FliK measures hook length and, at the appropriate point, sends a signal to FlhB to switch the substrate specificity of export from hook protein to late proteins such as flagellin.

Characterization of the flagellar hook length control protein fliK of Salmonella typhimurium and Escherichia coli

During flagellar morphogenesis in Salmonella typhimurium and Escherichia coli, the fliK gene product is responsible for hook length control. A previous study (M. Homma, T. Iino, and R. M. Macnab, J. Bacteriol. 170:2221-2228, 1988) had suggested that the fliK gene may generate two products; we have confirmed that both proteins are products of the fliK gene and have eliminated several possible explanations for the two forms. We have determined the DNA sequence of the fliK gene in both bacterial species. The deduced amino acid sequences of the wild-type FliK proteins of S. typhimurium and E. coli correspond to molecular masses of 41,748 and 39,246 Da, respectively, and are fairly hydrophilic. Alignment of the sequences gives an identity level of 50%, which is low for homologous flagellar proteins from S. typhimurium and E. coli; the C-terminal sequence is the most highly conserved part (71% identity in the last 154 amino acids). The central and C-terminal regions are rich in proline and glutamine residues, respectively. Linker insertion mutagenesis of the conserved C-terminal region completely abolished motility, whereas disruption of the less conserved N-terminal and central regions had little or no effect. We suggest that the N-terminal (or N-terminal and central) and C-terminal regions may constitute domains. For several reasons, we consider it unlikely that FliK is functioning as a molecular ruler for determining hook length and conclude that it is probably employing a novel mechanism.

Characterization of the fliL gene in the flagellar regulon of Escherichia coli and Salmonella typhimurium

filL is a small gene of unknown function that lies within the beginning of a large flagellar operon of Salmonella typhimurium and Escherichia coli. A spontaneous fliL mutant of S. typhimurium, containing a frameshift mutation about 40% from the 3' end of the gene, was moderately motile but swarmed poorly, suggesting that FliL might be a component of the flagellar motor or switch. However, in-frame deletions of the E. coli gene, including an essentially total deletion, had little or no effect on motility or chemotaxis. Thus, FliL does not appear to have a major role in flagellar structure or function and is therefore unlikely to be a component of the motor or switch; the effect on motility caused by truncation of the gene is probably an indirect one.

Genetic and biochemical analysis of Salmonella typhimurium FliI, a flagellar protein related to the catalytic subunit of the F0F1 ATPase and to virulence proteins of mammalian and plant pathogens

FliI is a Salmonella typhimurium protein that is needed for flagellar assembly and may be involved in a specialized protein export pathway that proceeds without signal peptide cleavage. FliI shows extensive sequence similarity to the catalytic beta subunit of the F0F1 ATPase (A. P. Volger, M. Homma, V. M. Irikura, and R. M. Macnab, J. Bacteriol. 173:3564-3572, 1991). It is even more similar to the Spa47 protein of Shigella flexneri (M. M. Venkatesan, J. M. Buysse, and E. V. Oaks, J. Bacteriol. 174:1990-2001, 1992) and the HrpB6 protein of Xanthomonas campestris (S. Fenselau, I. Balbo, and U. Bonas, Mol. Plant-Microbe Interact. 5:390-396, 1992), which are believed to play a role in the export of virulence proteins. Site-directed mutagenesis of residues in FliI that correspond to catalytically important residues in the F1 beta subunit resulted in loss of flagellation, supporting the hypothesis that FliI is an ATPase. FliI was overproduced and purified almost to homogeneity. It demonstrated ATP binding but not hydrolysis. An antibody raised against FliI permitted detection of the protein in wild-type cells and an estimate of about 1,500 subunits per cell. An antibody directed against the F1 beta subunit of Escherichia coli cross-reacted with FliI, confirming that the proteins are structurally related. The relationship between three proteins involved in flagellar assembly (FliI, FlhA, and FliP) and homologs in a variety of virulence systems is discussed.

Morphological pathway of flagellar assembly in Salmonella typhimurium

The process of flagellar assembly was investigated in Salmonella typhimurium. Seven types of flagellar precursors produced by various flagellar mutants were purified by CsCl density gradient protocol. They were characterized morphologically by electron microscopy, and biochemically by two-dimensional gel electrophoresis. The MS ring is formed in the absence of any other flagellar components, including the switch complex and the putative export apparatus. Four proteins previously identified as rod components, FlgB, FlgC, FlgF, FlgG, and another protein, FliE, assemble co-operatively into a stable structure. The hook is formed in two distinct steps; formation of its proximal part and elongation. Proximal part formation occurs, but elongation does not occur, in the absence of the LP ring. FlgD is necessary for hook formation, but not for LP-ring formation. A revised pathway of flagellar assembly is proposed based on these and other results.

Molecular analysis of the flagellar switch protein FliM of Salmonella typhimurium

Defects in the chemotaxis proteins CheY and CheZ of Salmonella typhimurium can be suppressed by mutations in the flagellar switch, such that swarming of a pseudorevertant on semisolid plates is significantly better than that of its parent. cheY suppressors contribute to a clockwise switch bias, and cheZ suppressors contribute to a counterclockwise bias. Among the three known switch genes, fliM contributes most examples of such suppressor mutations. We have investigated the changes in FliM that are responsible for suppression, as well as the changes in CheY or CheZ that are being compensated for. Ten independently isolated parental cheY mutations represented nine distinct mutations, one an amino acid duplication and the rest missense mutations. Several of the altered amino acids lie on one face of the three-dimensional structure of CheY (A. M. Stock, J. M. Mottonen, J. B. Stock, and C. E. Schutt, Nature (London) 337:745-749, 1989; K. Volz and P. Matsumura, J. Biol. Chem. 266:15511-15519, 1991); this face may constitute the binding site for the switch. All 10 cheZ mutations were distinct, with several of them resulting in premature termination. cheY and cheZ suppressors in FliM occurred in clusters, which in general did not overlap. A few cheZ suppressors and one cheY suppressor involved changes near the N terminus of FliM, but neither cheY nor cheZ suppressors involved changes near the C terminus. Among the strongest cheY suppressors were changes from Arg to a neutral amino acid or from Val to Glu, suggesting that electrostatic interactions may play an important role in switching. A given cheY or cheZ mutation could be suppressed by many different fliM mutations; conversely, a given fliM mutation was often encountered as a suppressor of more than one cheY or cheZ mutation. The data suggest that an important factor in suppression is a balancing of the shift in switch bias introduced by alteration of CheY or CheZ with an appropriate opposing shift introduced by alteration of FliM. For strains with a severe parental mutation, such as the cheZ null mutations, adjustment of switch bias is essentially the only factor in suppression, since the attractant L-aspartate caused at most a slight further enhancement of the swarming rate over that occurring in the absence of a chemotactic stimulus. We discuss a model for switching in which there are distinct interactions for the counterclockwise and clockwise states, with suppression occurring by impairment of one of the states and hence by relative enhancement of the other state. FliM can also undergo amino acid changes that result in a paralyzed (Mot-) phenotype; these changes were confined to a very few residues in the protein.

Salmonella typhimurium mutants defective in flagellar filament regrowth and sequence similarity of FliI to F0F1, vacuolar, and archaebacterial ATPase subunits

Many flagellar proteins are exported by a flagellum-specific export pathway. In an initial attempt to characterize the apparatus responsible for the process, we designed a simple assay to screen for mutants with export defects. Temperature-sensitive flagellar mutants of Salmonella typhimurium were grown at the permissive temperature (30 degrees C), shifted to the restrictive temperature (42 degrees C), and inspected in a light microscope. With the exception of switch mutants, they were fully motile. Next, cells grown at the permissive temperature had their flagellar filaments removed by shearing before the cells were shifted to the restrictive temperature. Most mutants were able to regrow filaments. However, flhA, fliH, fliI, and fliN mutants showed no or greatly reduced regrowth, suggesting that the corresponding gene products are involved in the process of flagellum-specific export. We describe here the sequences of fliH, fliI, and the adjacent gene, fliJ; they encode proteins with deduced molecular masses of 25,782, 49,208, and 17,302 Da, respectively. The deduced sequence of FliI shows significant similarity to the catalytic beta subunit of the bacterial F0F1 ATPase and to the catalytic subunits of vacuolar and archaebacterial ATPases; except for limited similarity in the motifs that constitute the nucleotide-binding or catalytic site, it appears unrelated to the E1E2 class of ATPases, to other proteins that mediate protein export, or to a variety of other ATP-utilizing enzymes. We hypothesize that FliI is either the catalytic subunit of a protein translocase for flagellum-specific export or a proton translocase involved in local circuits at the flagellum.

The flaA locus of Bacillus subtilis is part of a large operon coding for flagellar structures, motility functions, and an ATPase-like polypeptide

We cloned and sequenced 8.3 kb of Bacillus subtilis DNA corresponding to the flaA locus involved in flagellar biosynthesis, motility, and chemotaxis. The DNA sequence revealed the presence of 10 complete and 2 incomplete open reading frames. Comparison of the deduced amino acid sequences to data banks showed similarities of nine of the deduced products to a number of proteins of Escherichia coli and Salmonella typhimurium for which a role in flagellar functioning has been directly demonstrated. In particular, the sequence data suggest that the flaA operon codes for the M-ring protein, components of the motor switch, and the distal part of the basal-body rod. The gene order is remarkably similar to that described for region III of the enterobacterial flagellar regulon. One of the open reading frames was translated into a protein with 48% amino acid identity to S. typhimurium FliI and 29% identity to the beta subunit of E. coli ATP synthase.

New structural features of the flagellar base in Salmonella typhimurium revealed by rapid-freeze electron microscopy

The structure of the flagellar base in Salmonella typhimurium has been studied by rapid-freeze techniques. Freeze-substituted thin sections and freeze-etched replicas of cell envelope preparations have provided complementary information about the flagellar base. The flagellar base has a bell-shaped extension reaching as far as 50 nm into the bacterial cytoplasm. This structure can be recognized in intact bacteria but was studied in detail in cell envelopes, where some flagella lacking parts of the bell were helpful in understanding its substructure. Structural relationships may be inferred between this cytoplasmic component of the flagellum and the recently described flagellar intramembrane particle rings as well as the structures associated with the basal body in isolated, chemically fixed flagella.

The bacterial flagellum and flagellar motor: structure, assembly and function

The bacterial flagellum is a complex multicomponent structure which serves as the propulsive organelle for many species of bacteria. Rotation of the helical flagellar filament, driven by a proton-powered motor embedded in the cell wall, enables the flagellum to function as a screw propeller. It seems likely that almost all of the genes required for flagellar formation and function have been identified. Continuing analysis of the portions of the genome containing these genes may reveal the existence of a few more. Transcription of the flagellar genes is under the control of the products of a single operon, and so these genes constitute a regulon. Other controls, both transcriptional and post-transcriptional, have been identified. Many of these genes have been sequenced, and the information obtained will aid in the design of experiments to clarify the various regulatory mechanisms of the flagellar regulon. The flagellum is composed of several substructures. The long helical filament is connected via the flexible hook to the complex basal body which is located in the cell wall. The filament is composed of many copies of a single protein, and can adopt a number of distinct helical forms. Structural analyses of the filament are adding to our understanding of this dynamic polymer. The component proteins of the hook and filament have all been identified. Continuing studies on the structure of the basal body have revealed the presence of several hitherto unknown basal-body proteins, whose identities and functions have yet to be elucidated. The proteins essential for energizing the motor, the Mot and switch proteins, are thought to exist as multisubunit complexes peripheral to the basal body. These complexes have yet to be identified biochemically or morphologically. Not surprisingly, flagellar assembly is a complex process, occurring in several stages. Assembly occurs in a proximal-to-distal fashion; the basal body is assembled before the hook, and the hook before the filament. This pattern is also maintained within the filament, with monomers added at the distal end of the polymer; the same is presumably true of the other axial components. An exception to this general pattern is assembly of the Mot proteins into the motor, which appears to be possible at any time during flagellar assembly. With the identification of the genes encoding many of the flagellar proteins, the roles of these proteins in assembly is understood, but the function of a number of gene products in flagellar formation remains unknown.(ABSTRACT TRUNCATED AT 400 WORDS)

Flagellar assembly in Salmonella typhimurium: analysis with temperature-sensitive mutants

The process of flagellar assembly in Salmonella typhimurium was investigated by using temperature-sensitive mutants. The mutants were grown at the restrictive temperature and then at the permissive temperature, with radiolabel supplied in the first phase of the experiment and not the second, or vice versa. Flagellar hook-basal body complexes were then purified and analyzed by gel electrophoresis and autoradiography. The extent to which a given protein was labeled in the two phases of the experiment provided information as to whether it preceded or followed the block caused by the mutant protein. We conclude the following concerning flagellar assembly. The M-ring protein (FliF) is stably incorporated in the earliest stage detected, along with two previously unknown proteins, with apparent molecular masses of 23 and 26 kilodaltons, respectively, and possibly one of the switch components, FliG. Independent of that event and all other events, the P-ring and L-ring proteins (FlgI and FlgH) are synthesized and exported to the periplasm and outer membrane by the primary cellular export pathway. Rod assembly occurs by export (via the flagellum-specific pathway) of subunits of four proteins, FlgB, FlgC, FlgF, and FlgG, and their incorporation, probably in that order, into the rod structure; this stage requires the flhA and fliI genes, perhaps because they encode part of the export apparatus. Once rod assembly is complete, the FlgI and FlgH proteins assemble around the rod to form the P and L rings. The rod structure, which is only metastable while it is being constructed, becomes stable upon P-ring addition. Export (via the flagellum-specific pathway) and assembly of hook protein, hook-associated proteins, and filament protein then occur successively. A number of flagellar proteins, whose genetic origin and structural role are not yet known, were identified on the basis of their dependence on the flagellar master operon for expression.

The MotA protein of E. coli is a proton-conducting component of the flagellar motor

A number of mutants of motA, a gene necessary for flagellar rotation in E. coli, were isolated and characterized. Many mutations were dominant, owing to competition between functional and nonfunctional MotA for a limited number of sites on the flagellar motor. A new class of mutant was discovered in which flagellar torque is normal at low speeds but reduced at high speeds. Hydrogen isotope effects on these mutants indicate that MotA catalyzes proton transfer. We confirmed an earlier observation that overproduction of MotA leads to accumulation of the protein in the cytoplasmic membrane and to significant decreases in growth rate. When nonfunctional mutant variants of MotA were overproduced instead, they accumulated in the cytoplasmic membrane, but growth was not impaired. These results also suggest that MotA conducts protons. This was confirmed by measuring the proton permeabilities of vesicles containing wild-type or mutant MotA proteins.

Protein phosphorylation and regulation of adaptive responses in bacteria

Bacteria continuously adapt to changes in their environment. Responses are largely controlled by signal transduction systems that contain two central enzymatic components, a protein kinase that uses adenosine triphosphate to phosphorylate itself at a histidine residue and a response regulator that accepts phosphoryl groups from the kinase. This conserved phosphotransfer chemistry is found in a wide range of bacterial species and operates in diverse systems to provide different regulatory outputs. The histidine kinases are frequently membrane receptor proteins that respond to environmental signals and phosphorylate response regulators that control transcription. Four specific regulatory systems are discussed in detail: chemotaxis in response to attractant and repellent stimuli (Che), regulation of gene expression in response to nitrogen deprivation (Ntr), control of the expression of enzymes and transport systems that assimilate phosphorus (Pho), and regulation of outer membrane porin expression in response to osmolarity and other culture conditions (Omp). Several additional systems are also examined, including systems that control complex developmental processes such as sporulation and fruiting-body formation, systems required for virulent infections of plant or animal host tissues, and systems that regulate transport and metabolism. Finally, an attempt is made to understand how cross-talk between parallel phosphotransfer pathways can provide a global regulatory curcuitry.

Flagellar switch of Salmonella typhimurium: gene sequences and deduced protein sequences

The fliG, fliM, and fliN genes of Salmonella typhimurium encode flagellar components that participate in energy transduction and switching. We have cloned these genes and determined their sequences. The deduced amino acid sequences correspond to proteins with molecular masses of 36,809, 37,815, and 14,772 daltons, respectively. None of the protein sequences are especially hydrophobic or look as though they correspond to integral membrane proteins, a result consistent with other evidence suggesting that the proteins may be peripheral to the membrane, possibly mounted onto the basal body M ring. The fliL gene, which immediately precedes fliM, is of unknown function; it encodes a protein with a deduced molecular mass of 17,082 daltons. The hydropathy profile of FliL indicates that it is likely to be an integral membrane protein with at least one spanning segment, near its N terminus. None of the four proteins exhibit consensus N-terminal signal sequences. Comparison of the fliL, fliM, and fliN sequences with the homologous ones in Escherichia coli reveals ranges of similarities of 77 to 95% at the amino acid level and 75 to 86% at the nucleotide level, with the majority (58 to 89%) of codon changes being synonymous ones.

Operon structure of flagellar genes in Salmonella typhimurium

In Salmonella typhimurium, more than 40 genes have been shown to be involved in flagellar formation and function and almost all of them have been assigned to three regions of the chromosome, termed region I, region II, and region III. In the present study, a large number of transposon-insertion mutants in these flagellar genes were isolated using Tn10 and Mud1. The flaV gene was found to be a strong hot spot for Tn10 insertion. Complementation analysis of the polarity effects exerted by the transposon-insertion mutants defined 13 different flagellar operons; 3 in region I, 4 in region II, and 6 in region III. These results are compared with the reported arrangement of the corresponding genes in Escherichia coli.