Assembly of mutant pilins in Pseudomonas aeruginosa: formation of pili composed of heterologous subunits

Structural interactions define assembly adapter function of a type II secretion system pseudopilin

The type IV filament superfamily comprises widespread membrane-associated polymers in prokaryotes. The type II secretion system (T2SS), a virulence pathway in many pathogens, belongs to this superfamily. A knowledge gap in understanding of the T2SS is the molecular role of a small "pseudopilin" protein. Using multiple biophysical techniques, we have deciphered how this missing component of the Xcp T2SS architecture is structurally integrated, and thereby unlocked its function. We demonstrate that low-abundance XcpH is the adapter that bridges a trimeric initiating tip complex, XcpIJK, with a periplasmic filament of XcpG subunits. Each pseudopilin protein caps an XcpG protofilament in an overall pseudopilus compatible with dimensions of the periplasm and the outer membrane-spanning secretin through which substrates pass. Unexpectedly, to fulfill its adapter function, the XcpH N-terminal helix must be unwound, a property shared with XcpG subunits. We provide an experimentally validated three-dimensional structural model of a complete type IV filament.

Characterization of Zoospore Type IV Pili in Actinoplanes missouriensis

The rare actinomycete Actinoplanes missouriensis produces terminal sporangia containing a few hundred flagellated spores. After release from the sporangia, the spores swim rapidly in aquatic environments as zoospores. The zoospores stop swimming and begin to germinate in niches for vegetative growth. Here, we report the characterization and functional analysis of zoospore type IV pili in A. missouriensis The pilus gene (pil) cluster, consisting of three apparently σ^FliA-dependent transcriptional units, is activated during sporangium formation similarly to the flagellar gene cluster, indicating that the zoospore has not only flagella but also pili. With a new method in which zoospores were fixed with glutaraldehyde to prevent pilus retraction, zoospore pili were observed relatively easily using transmission electron microscopy, showing 6 ± 3 pili per zoospore (n = 37 piliated zoospores) and a length of 0.62 ± 0.35 μm (n = 206), via observation of fliC-deleted, nonflagellated zoospores. No pili were observed in the zoospores of a prepilin-encoding pilA deletion (ΔpilA) mutant. In addition, the deletion of pilT, which encodes an ATPase predicted to be involved in pilus retraction, substantially reduced the frequency of pilus retraction. Several adhesion experiments using wild-type and ΔpilA zoospores indicated that the zoospore pili are required for the sufficient adhesion of zoospores to hydrophobic solid surfaces. Many zoospore-forming rare actinomycetes conserve the pil cluster, which indicates that the zoospore pili yield an evolutionary benefit in the adhesion of zoospores to hydrophobic materials as footholds for germination in their mycelial growth.IMPORTANCE Bacterial zoospores are interesting cells in that their physiological state changes dynamically: they are dormant in sporangia, show temporary mobility after awakening, and finally stop swimming to germinate in niches for vegetative growth. However, the cellular biology of a zoospore remains largely unknown. This study describes unprecedented zoospore type IV pili in the rare actinomycete Actinoplanes missouriensis Similar to the case for the usual bacterial type IV pili, zoospore pili appeared to be retractable. Our findings that the zoospore pili have a functional role in the adhesion of zoospores to hydrophobic solid surfaces and that the zoospores use both pili and flagella properly according to their different purposes provide an important insight into the cellular biology of the zoospore.

Structural insights into the mechanism of Type IVa pilus extension and retraction ATPase motors

Type IVa pili are bacterial appendages involved in diverse physiological processes, including electron transfer in Geobacter sulfurreducens. ATP hydrolysis coupled with conformational changes powers the extension (PilB) and retraction (PilT) motors in the pilus machinery. We report the unliganded crystal structures of the core ATPase domain of PilB and PilT-4 from G. sulfurreducens at 3.1 and 2.6 Å resolution, respectively. PilB structure revealed three distinct conformations, that is, open, closed, and open' which were previously proposed to be mediated by ATP/ADP binding. PilT-4 subunits, on the other hand, were observed in the closed state conformation. We further report that both PilB and PilT-4 hexamers have two high-affinity ATP-binding sites. Comparative structural analysis and solution data presented here supports the "symmetric rotary model" for these ATPase motors. Our data further suggest that pores of these motors rotate either clockwise or counterclockwise to facilitate assembly or disassembly of right-handed or left-handed pilus.

DATABASE

Structural data are available in the RCSB PDB database under the PDB ID 5ZFQ (PilT-4), 5ZFR (PilB).

Motility and adhesion through type IV pili in Gram-positive bacteria

Type IV pili are hair-like bacterial surface appendages that play a role in diverse processes such as cellular adhesion, colonization, twitching motility, biofilm formation, and horizontal gene transfer. These extracellular fibers are composed exclusively or primarily of many copies of one or more pilin proteins, tightly packed in a helix so that the highly hydrophobic amino-terminus of the pilin is buried in the pilus core. Type IV pili have been characterized extensively in Gram-negative bacteria, and recent advances in high-throughput genomic sequencing have revealed that they are also widespread in Gram-positive bacteria. Here, we review the current state of knowledge of type IV pilus systems in Gram-positive bacterial species and discuss them in the broader context of eubacterial type IV pili.

Polar N-terminal Residues Conserved in Type 2 Secretion Pseudopilins Determine Subunit Targeting and Membrane Extraction Steps during Fibre Assembly

Bacterial type 2 secretion systems (T2SS), type 4 pili, and archaeal flagella assemble fibres from initially membrane-embedded pseudopilin and pilin subunits. Fibre subunits are made as precursors with positively charged N-terminal anchors, whose cleavage via the prepilin peptidase, essential for pilin membrane extraction and assembly, is followed by N-methylation of the mature (pseudo)pilin N terminus. The conserved Glu residue at position 5 (E5) of mature (pseudo)pilins is essential for assembly. Unlike T4 pilins, where E5 residue substitutions also abolish N-methylation, the E5A variant of T2SS pseudopilin PulG remains N-methylated but is affected in interaction with the T2SS component PulM. Here, biochemical and functional analyses showed that the PulM interaction defect only partly accounts for the PulG^E5A assembly defect. First, PulG^T2A variant, equally defective in PulM interaction, remained partially functional. Furthermore, pseudopilus assembly defect of pulG(E5A) mutant was stronger than that of the pulM deletion mutant. To understand the dominant effect of E5A mutation, we used molecular dynamics simulations of PulG^E5A, methylated PulG^WT (MePulG^WT), and MePulG^E5A variant in a model membrane. These simulations pointed to a key role for an intramolecular interaction between the pseudopilin N-terminal amine and E5 to limit polar interactions with membrane phospholipids. N-methylation of the N-terminal amine further limited its interactions with phospholipid head-groups to facilitate pseudopilin membrane escape. By binding to polar residues in the conserved N-terminal region of PulG, we propose that PulM acts as chaperone to promote pseudopilin recruitment and coordinate its membrane extraction with subsequent steps of the fibre assembly process.

Fimbriae: Classification and Biochemistry

Proteinaceous, nonflagellar surface appendages constitute a variety of structures, including those known variably as fimbriae or pili. Constructed by distinct assembly pathways resulting in diverse morphologies, fimbriae have been described to mediate functions including adhesion, motility, and DNA transfer. As these structures can represent major diversifying elements among Escherichia and Salmonella isolates, multiple fimbrial classification schemes have been proposed and a number of mechanistic insights into fimbrial assembly and function have been made. Herein we describe the classifications and biochemistry of fimbriae assembled by the chaperone/usher, curli, and type IV pathways.

Exceptionally widespread nanomachines composed of type IV pilins: the prokaryotic Swiss Army knives

Prokaryotes have engineered sophisticated surface nanomachines that have allowed them to colonize Earth and thrive even in extreme environments. Filamentous machineries composed of type IV pilins, which are associated with an amazing array of properties ranging from motility to electric conductance, are arguably the most widespread since distinctive proteins dedicated to their biogenesis are found in most known species of prokaryotes. Several decades of investigations, starting with type IV pili and then a variety of related systems both in bacteria and archaea, have outlined common molecular and structural bases for these nanomachines. Using type IV pili as a paradigm, we will highlight in this review common aspects and key biological differences of this group of filamentous structures.

Using type IV pili as a paradigm, we review common genetic, structural and mechanistic features (many) as well as differences (few) of the exceptionally widespread and functionally versatile prokaryotic nano-machines composed of type IV pilins.

Type IV pilus assembly proficiency and dynamics influence pilin subunit phospho-form macro- and microheterogeneity in Neisseria gonorrhoeae

The PilE pilin subunit protein of the gonococcal Type IV pilus (Tfp) colonization factor undergoes multisite, covalent modification with the zwitterionic phospho-form modification phosphoethanolamine (PE). In a mutant lacking the pilin-like PilV protein however, PilE is modified with a mixture of PE and phosphocholine (PC). Moreover, intrastrain variation of PilE PC modification levels have been observed in backgrounds that constitutively express PptA (the protein phospho-form transferase A) required for both PE and PC modification. The molecular basis underlying phospho-form microheterogeneity in these instances remains poorly defined. Here, we examined the effects of mutations at numerous loci that disrupt or perturb Tfp assembly and observed that these mutants phenocopy the pilV mutant vis a vis phospho-form modification status. Thus, PC modification appears to be directly or indirectly responsive to the efficacy of pilin subunit interactions. Despite the complexity of contributing factors identified here, the data favor a model in which increased retention in the inner membrane may act as a key signal in altering phospho-form modification. These results also provide an alternative explanation for the variation in PilE PC levels observed previously and that has been assumed to be due to phase variation of pptA. Moreover, mass spectrometry revealed evidence for mono- and di-methylated forms of PE attached to PilE in mutants deficient in pilus assembly, directly implicating a methyltransferase-based pathway for PC synthesis in N. gonorrhoeae.

Type IV pilin proteins: versatile molecular modules

Type IV pili (T4P) are multifunctional protein fibers produced on the surfaces of a wide variety of bacteria and archaea. The major subunit of T4P is the type IV pilin, and structurally related proteins are found as components of the type II secretion (T2S) system, where they are called pseudopilins; of DNA uptake/competence systems in both Gram-negative and Gram-positive species; and of flagella, pili, and sugar-binding systems in the archaea. This broad distribution of a single protein family implies both a common evolutionary origin and a highly adaptable functional plan. The type IV pilin is a remarkably versatile architectural module that has been adopted widely for a variety of functions, including motility, attachment to chemically diverse surfaces, electrical conductance, acquisition of DNA, and secretion of a broad range of structurally distinct protein substrates. In this review, we consider recent advances in this research area, from structural revelations to insights into diversity, posttranslational modifications, regulation, and function.

Surface organelles assembled by secretion systems of Gram-negative bacteria: diversity in structure and function

Gram-negative bacteria express a wide variety of organelles on their cell surface. These surface structures may be the end products of secretion systems, such as the hair-like fibers assembled by the chaperone/usher (CU) and type IV pilus pathways, which generally function in adhesion to surfaces and bacterial-bacterial and bacterial-host interactions. Alternatively, the surface organelles may be integral components of the secretion machinery itself, such as the needle complex and pilus extensions formed by the type III and type IV secretion systems, which function in the delivery of bacterial effectors inside host cells. Bacterial surface structures perform functions critical for pathogenesis and have evolved to withstand forces exerted by the external environment and cope with defenses mounted by the host immune system. Given their essential roles in pathogenesis and exposed nature, bacterial surface structures also make attractive targets for therapeutic intervention. This review will describe the structure and function of surface organelles assembled by four different Gram-negative bacterial secretion systems: the CU pathway, the type IV pilus pathway, and the type III and type IV secretion systems.

Heterologous assembly of type IV pili by a type II secretion system reveals the role of minor pilins in assembly initiation

In Gram-negative bacteria, type IV pilus assembly (T4PS) and type II secretion (T2SS) systems polymerize inner membrane proteins called major pilins or pseudopilins respectively, into thin filaments. Four minor pilins are required in both systems for efficient fibre assembly. Escherichia coli K-12 has a set of T4PS assembly genes that are silent under standard growth conditions. We studied the heterologous assembly of the E. coli type IV pilin PpdD by the Klebsiella oxytoca T2SS called the Pul system. PpdD pilus assembly in this context depended on the expression of the K. oxytoca minor pseudopilin genes pulHIJK or of the E. coli minor pilin genes ppdAB-ygdB-ppdC. The E. coli minor pilins restored assembly of the major pseudopilin PulG in a pulHIJK mutant, but not the secretion of the T2SS substrate pullulanase. Thus, minor pilins and minor pseudopilins are functionally interchangeable in initiating major pilin assembly, further extending the fundamental similarities between the two systems. The data suggest that, in both systems, minor pilins activate the assembly machinery through a common self-assembly mechanism. When produced together, PulG and PpdD assembled into distinct homopolymers, establishing major pilins as key determinants of pilus elongation and structure.

Structure of the Vibrio cholerae Type IVb Pilus and stability comparison with the Neisseria gonorrhoeae type IVa pilus

Type IV pili are multifunctional filaments displayed on many bacterial pathogens. Members of the Type IVa pilus subclass are found on a diverse group of human pathogens, whereas Type IVb pili are found almost exclusively on enteric bacteria. The Type IVa and IVb subclasses are distinguished by differences in the pilin subunits, including the fold of the globular domain. To understand the implications of the distinct pilin folds, we compared the stabilities of pilin subunits and pilus filaments for the Type IVa GC pilus from Neisseria gonorrhoeae and the Type IVb toxin-coregulated pilus (TCP) from Vibrio cholerae. We show that while recombinant TCP pilin is more stable than GC pilin, the GC pili are more resistant to proteolysis, heat and chemical denaturation than TCP, remaining intact in 8 M urea. To understand these differences, we determined the TCP structure by electron microscopy and three-dimensional image reconstruction. TCP have an architecture similar to that of GC pili, with subunits arranged in a right-handed 1-start helix and related by an 8.4-Å axial rise and a 96.8° azimuthal rotation. However, the TCP subunits are not as tightly packed as GC pilins, and the distinct Type IVb pilin fold exposes a segment of the α-helical core of TCP. Hydrophobic interactions dominate for both pilus subtypes, but base stacking by aromatic residues conserved among the Type IVa pilins may contribute to GC pilus stability. The extraordinary stability of GC pili may represent an adaptation of the Type IVa pili to harsh environments and the need to retract against external forces.

Genetic and mass spectrometry analyses of the unusual type IV-like pili of the archaeon Methanococcus maripaludis

The structure of pili from the archaeon Methanococcus maripaludis is unlike that of any bacterial pili. However, genetic analysis of the genes involved in the formation of these pili has been lacking until this study. Pili were isolated from a nonflagellated (ΔflaK) mutant and shown by sodium dodecyl sulfate-polyacrylamide gel electrophoresis to consist primarily of subunits with an apparent molecular mass of 17 kDa. In-frame deletions were created in three genes, MMP0233, MMP0236, and MMP0237, which encode proteins with bacterial type IV pilin-like signal peptides previously identified by in silico methodology as likely candidates for pilus structural proteins. Deletion of MMP0236 or MMP0237 resulted in mutant cells completely devoid of pili on the cell surface, while deletion of the third pilin-like gene, MMP0233, resulted in cells greatly reduced in the number of pili on the surface. Complementation with the deleted gene in each case returned the cells to a piliated state. Surprisingly, mass spectrometry analysis of purified pili identified the major structural pilin as another type IV pilin-like protein, MMP1685, whose gene is located outside the first pilus locus. This protein was found to be glycosylated with an N-linked branched pentasaccharide glycan. Deletion and complementation analysis confirmed that MMP1685 is required for piliation.

Transcriptional activation of the tad type IVb pilus operon by PypB in Yersinia enterocolitica

Type IV pili are virulence factors in various bacteria and mediate, among other functions, the colonization of diverse surfaces. Various subclasses of type IV pili have been identified, but information on pilus expression, biogenesis, and the associated phenotypes is sparse for the genus Yersinia. We recently described the identification of PypB as a transcriptional regulator in Yersinia enterocolitica. Here we show that the pypB gene is associated with the tad locus, a genomic island that is widespread among bacterial and archaeal species. The genetic linkage of pypB with the tad locus is conserved throughout the yersiniae but is not found among other bacteria carrying the tad locus. We show that the genes of the tad locus form an operon in Y. enterocolitica that is controlled by PypB and that pypB is part of this operon. The tad genes encode functions necessary for the biogenesis of the Flp subfamily of type IVb pili initially described for Aggregatibacter actinomycetemcomitans to mediate a tight-adherence phenotype. In Y. enterocolitica, the Flp pilin protein shows some peculiarities in its amino acid sequence that imply similarities as well as differences compared to typical motifs found in the Flp subtype of type IVb pili. Flp is expressed and processed after PypB overproduction, resulting in microcolony formation but not in increased adherence to biotic or abiotic surfaces. Our data describe the transcriptional regulation of the tad type IVb pilus operon by PypB in Y. enterocolitica but fail to show most previously described phenotypes associated with this type of pilus in other bacteria.

Structure of the minor pseudopilin EpsH from the Type 2 secretion system of Vibrio cholerae

Many Gram-negative bacteria use the multi-protein type II secretion system (T2SS) to selectively translocate virulence factors from the periplasmic space into the extracellular environment. In Vibrio cholerae the T2SS is called the extracellular protein secretion (Eps) system,which translocates cholera toxin and several enzymes in their folded state across the outer membrane. Five proteins of the T2SS, the pseudopilins, are thought to assemble into a pseudopilus, which may control the outer membrane pore EpsD, and participate in the active export of proteins in a "piston-like" manner. We report here the 2.0 A resolution crystal structure of an N-terminally truncated variant of EpsH, a minor pseudopilin from Vibrio cholerae. While EpsH maintains an N-terminal alpha-helix and C-terminal beta-sheet consistent with the type 4a pilin fold, structural comparisons reveal major differences between the minor pseudopilin EpsH and the major pseudopilin GspG from Klebsiella oxytoca: EpsH contains a large beta-sheet in the variable domain, where GspG contains an alpha-helix. Most importantly, EpsH contains at its surface a hydrophobic crevice between its variable and conserved beta-sheets, wherein a majority of the conserved residues within the EpsH family are clustered. In a tentative model of a T2SS pseudopilus with EpsH at its tip, the conserved crevice faces away from the helix axis. This conserved surface region may be critical for interacting with other proteins from the T2SS machinery.

Type IV fimbrial biogenesis is required for protease secretion and natural transformation in Dichelobacter nodosus

The objective of this study was to develop an understanding of the molecular mechanisms by which type IV fimbrial biogenesis, natural transformation, and protease secretion are linked in the ovine foot rot pathogen, Dichelobacter nodosus. We have shown that like the D. nodosus fimbrial subunit FimA, the pilin-like protein PilE and the FimN, FimO, and FimP proteins, which are homologs of PilB, PilC, and PilD from Pseudomonas aeruginosa, are essential for fimbrial biogenesis and natural transformation, indicating that transformation requires an intact type IV fimbrial apparatus. The results also showed that extracellular protease secretion in the fimN, fimO, fimP, and pilE mutants was significantly reduced, which represents the first time that PilB, PilC, and PilE homologs have been shown to be required for the secretion of unrelated extracellular proteins in a type IV fimbriate bacterium. Quantitative real-time PCR analysis of the three extracellular protease genes aprV2, aprV5, and bprV showed that the effects on protease secretion were not mediated at the transcriptional level. Bioinformatic analysis did not identify a classical type II secretion system, and the putative fimbrial biogenesis gene pilQ was the only outer membrane secretin gene identified. Based on these results, it is postulated that in D. nodosus, protease secretion occurs by a type II secretion-related process that directly involves components of the type IV fimbrial biogenesis machinery, which represents the only type II secretion system encoded by the small genome of this highly evolved pathogen.

Identification of diverse archaeal proteins with class III signal peptides cleaved by distinct archaeal prepilin peptidases

Most secreted archaeal proteins are targeted to the membrane via a tripartite signal composed of a charged N terminus and a hydrophobic domain, followed by a signal peptidase-processing site. Signal peptides of archaeal flagellins, similar to class III signal peptides of bacterial type IV pilins, are distinct in that their processing sites precede the hydrophobic domain, which is crucial for assembly of these extracytoplasmic structures. To identify the complement of archaeal proteins with class III signal sequences, a PERL program (FlaFind) was written. A diverse set of proteins was identified, and many of these FlaFind positives were encoded by genes that were cotranscribed with homologs of pilus assembly genes. Moreover, structural conservation of primary sequences between many FlaFind positives and subunits of bacterial pilus-like structures, which have been shown to be critical for pilin assembly, have been observed. A subset of pilin-like FlaFind positives contained a conserved domain of unknown function (DUF361) within the signal peptide. Many of the genes encoding these proteins were in operons that contained a gene encoding a novel euryarchaeal prepilin-peptidase, EppA, homolog. Heterologous analysis revealed that Methanococcus maripaludis DUF361-containing proteins were specifically processed by the EppA homolog of this archaeon. Conversely, M. maripaludis preflagellins were cleaved only by the archaeal preflagellin peptidase FlaK. Together, the results reveal a diverse set of archaeal proteins with class III signal peptides that might be subunits of as-yet-undescribed cell surface structures, such as archaeal pili.

Substitutions in the N-terminal alpha helical spine of Neisseria gonorrhoeae pilin affect Type IV pilus assembly, dynamics and associated functions

Type IV pili (Tfp) are multifunctional surface appendages expressed by many Gram negative species of medical, environmental and industrial importance. The N-terminally localized, so called alpha-helical spine is the most conserved structural feature of pilin subunits in these organelles. Prevailing models of pilus assembly and structure invariably implicate its importance to membrane trafficking, organelle structure and related functions. Nonetheless, relatively few studies have examined the effects of missense substitutions within this domain. Using Neisseria gonorrhoeae as a model system, we constructed mutants with single and multiple amino acid substitutions localized to this region of the pilin subunit PilE and characterized them with regard to pilin stability, organelle expression and associated phenotypes. The consequences of simultaneous expression of the mutant and wild-type PilE forms were also examined. The findings document for the first time in a defined genetic background the phenomenon of pilin intermolecular complementation in which assembly defective pilin can be rescued into purifiable Tfp by coexpression of wild-type PilE. The results further demonstrate that pilin subunit composition can impact on organelle dynamics mediated by the PilT retraction protein via a process that appears to monitor the efficacy of subunit-subunit interactions. In addition to confirming and extending the evidence for PilE multimerization as an essential component for competence for natural genetic transformation, this work paves the way for detailed studies of Tfp subunit-subunit interactions including self-recognition within the membrane and packing within the pilus polymer.

The TadV protein of Actinobacillus actinomycetemcomitans is a novel aspartic acid prepilin peptidase required for maturation of the Flp1 pilin and TadE and TadF pseudopilins

The tad locus of Actinobacillus actinomycetemcomitans encodes genes for the biogenesis of Flp pili, which allow the bacterium to adhere tenaciously to surfaces and form strong biofilms. Although tad (tight adherence) loci are widespread among bacterial and archaeal species, very little is known about the functions of the individual components of the Tad secretion apparatus. Here we characterize the mechanism by which the pre-Flp1 prepilin is processed to the mature pilus subunit. We demonstrate that the tadV gene encodes a prepilin peptidase that is both necessary and sufficient for proteolytic maturation of Flp1. TadV was also found to be required for maturation of the TadE and TadF pilin-like proteins, which we term pseudopilins. Using site-directed mutagenesis, we show that processing of pre-Flp1, pre-TadE, and pre-TadF is required for biofilm formation. Mutation of a highly conserved glutamic acid residue at position +5 of Flp1, relative to the cleavage site, resulted in a processed pilin that was blocked in assembly. In contrast, identical mutations in TadE or TadF had no effect on biofilm formation, indicating that the mechanisms by which Flp1 pilin and the pseudopilins function are distinct. We also determined that two conserved aspartic acid residues in TadV are critical for function of the prepilin peptidase. Together, our results indicate that the A. actinomycetemcomitans TadV protein is a member of a novel subclass of nonmethylating aspartic acid prepilin peptidases.

Type II secretion: from structure to function

Gram-negative bacteria use the type II secretion system to transport a large number of secreted proteins from the periplasmic space into the extracellular environment. Many of the secreted proteins are major virulence factors in plants and animals. The components of the type II secretion system are located in both the inner and outer membranes where they assemble into a multi-protein, cell-envelope spanning, complex. This review discusses recent progress, particularly newly published structures obtained by X-ray crystallography and electron microscopy that have increased our understanding of how the type II secretion apparatus functions and the role that individual proteins play in this complex system.

Protein secretion in the Archaea: multiple paths towards a unique cell surface

Archaea are similar to other prokaryotes in most aspects of cell structure but are unique with respect to the lipid composition of the cytoplasmic membrane and the structure of the cell surface. Membranes of archaea are composed of glycerol-ether lipids instead of glycerol-ester lipids and are based on isoprenoid side chains, whereas the cell walls are formed by surface-layer proteins. The unique cell surface of archaea requires distinct solutions to the problem of how proteins cross this barrier to be either secreted into the medium or assembled as appendages at the cell surface.

Structure and assembly of the pseudopilin PulG

The pseudopilin PulG is one of several essential components of the type II pullulanase secretion machinery (the Pul secreton) of the Gram-negative bacterium Klebsiella oxytoca. The sequence of the N-terminal 25 amino acids of the PulG precursor is hydrophobic and very similar to the corresponding region of type IV pilins. The structure of a truncated PulG (lacking the homologous region), as determined by X-ray crystallography, was found to include part of the long N-terminal alpha-helix and the four internal anti-parallel beta-strands that characterize type IV pilins, but PulG lacks the highly variable loop region with a disulphide bond that is found in the latter. When overproduced, PulG forms flexible pili whose structural features, as visualized by electron microscopy, are similar to those of bacterial type IV pili. The average helical repeat comprises 17 PulG subunits and four helical turns. Electron microscopy and molecular modelling show that PulG probably assembles into left-handed helical pili with the long N-terminal alpha-helix tightly packed in the centre of the pilus. As in the type IV pilins, the hydrophobic N-terminal part of the PulG alpha-helix is necessary for its assembly. Subtle sequence variations within this highly conserved segment seem to determine whether or not a type IV pilin can be assembled into pili by the Pul secreton.

A conserved set of pilin-like molecules controls type IV pilus dynamics and organelle-associated functions in Neisseria gonorrhoeae

Type IV pili (Tfp) play central roles in prokaryotic cell biology and disease pathogenesis. As dynamic filamentous polymers, they undergo rounds of extension and retraction modelled as pilin subunit polymerization and depolymerization events. Currently, the molecular mechanisms and components influencing Tfp dynamics remain poorly understood. Using Neisseria gonorrhoeae as a model system, we show that mutants lacking any one of a set of five proteins sharing structural similarity to the pilus subunit are dramatically reduced in Tfp expression and that these defects are suppressed in the absence of the PilT pilus retraction protein. Thus, these molecules are not canonical assembly factors but rather act as effectors of pilus homeostasis by promoting extension/polymerization events in the presence of PilT. Furthermore, localization studies support the conclusion that these molecules form a Tfp-associated complex and influence levels of PilC, the epithelial cell adhesin, in Tfp-enriched shear fractions. This is the first time that the step at which individual pilin-like proteins impact on Tfp expression has been defined. The findings have important implications for understanding Tfp dynamics and fundamental Tfp structure/function relationships.

Pilin-like proteins in the extremely thermophilic bacterium Thermus thermophilus HB27: implication in competence for natural transformation and links to type IV pilus biogenesis

The extreme thermophile Thermus thermophilus HB27 exhibits high frequencies of natural transformation. Although we recently reported identification of the first competence genes in Thermus, the molecular basis of DNA uptake is unknown. A pilus-like structure is assumed to be involved. Twelve genes encoding prepilin-like proteins were identified in three loci in the genome of T. thermophilus. Mutational analyses, described in this paper, revealed that one locus, which contains four genes that encode prepilin-like proteins (pilA1 to pilA4), is essential for natural transformation. Additionally, comZ, a new competence gene with no similarity to known genes, was identified. Analysis of the piliation phenotype revealed wild-type piliation of a pilA1-pilA3Deltakat mutant and a comZ mutant, whereas a pilA4 mutant was found to be completely devoid of pilus structures. These findings, together with the significant similarity of PilA4 to prepilins, led to the conclusion that the T. thermophilus pilus structures are type IV pili. Furthermore, the loss of the transformation and piliation phenotype in the pilA4 mutant suggests that type IV pili are implicated in natural transformation of T. thermophilus HB27.

Type IV-like pili formed by the type II secreton: specificity, composition, bundling, polar localization, and surface presentation of peptides

The secreton or type II secretion machinery of gram-negative bacteria includes several type IV pilin-like proteins (the pseudopilins) that are absolutely required for secretion. We previously reported the presence of a bundled pilus composed of the pseudopilin PulG on the surface of agar-grown Escherichia coli K-12 cells expressing the Klebsiella oxytoca pullulanase (Pul) secreton genes at high levels (N. Sauvonnet, G. Vignon, A. P. Pugsley, and P. Gounon, EMBO J. 19:2221-2228, 2000). We show here that PulG is the only pseudopilin in purified pili and that the phenomenon is not restricted to the Pul secreton reconstituted in E. coli or to PulG. For example, high-level expression of the endogenous E. coli gsp secreton genes caused production of bundled pili composed of the pseudopilin GspG, and the Pul secreton was able to form pili composed of PulG-like proteins from secreton systems of other bacteria. PulG derivatives in which the C terminus was extended by the addition of eight different peptides were also assembled into pili and functioned in secretion. Three of the C-terminal peptides were shown to be exposed along the entire length of the assembled pili. Hence, the C terminus of PulG may represent a permissive site for the insertion of immunogenic epitopes or other peptide sequences. One of these PulG variants, with a six-histidine tag at its C terminus, formed nonpolar, nonbundled pili, suggesting that bundle formation and polar localization are not correlated with the ability of PulG to function in secretion. We propose that the PulG pilus is an artifactual manifestation of a periplasmic "pseudopilus" and that cycles of pseudopilus extension and retraction within the periplasm propel pullulanase through secretin channels in the outer membrane. Abnormally long pili that extend beyond the outer membrane are produced only when pilus length control and retraction are deregulated by overproduction of the major pseudopilus subunit (PulG).

Type IV pilin structure and assembly: X-ray and EM analyses of Vibrio cholerae toxin-coregulated pilus and Pseudomonas aeruginosa PAK pilin

Pilin assembly into type IV pili is required for virulence by bacterial pathogens that cause diseases such as cholera, pneumonia, gonorrhea, and meningitis. Crystal structures of soluble, N-terminally truncated pilin from Vibrio cholera toxin-coregulated pilus (TCP) and full-length PAK pilin from Pseudomonas aeruginosa reveal a novel TCP fold, yet a shared architecture for the type IV pilins. In each pilin subunit a conserved, extended, N-terminal alpha helix wrapped by beta strands anchors the structurally variable globular head. Inside the assembled pilus, characterized by cryo-electron microscopy and crystallography, the extended hydrophobic alpha helices make multisubunit contacts to provide mechanical strength and flexibility. Outside, distinct interactions of adaptable heads contribute surface variation for specificity of pilus function in antigenicity, motility, adhesion, and colony formation.

Competence for natural transformation in Neisseria gonorrhoeae: components of DNA binding and uptake linked to type IV pilus expression

The mechanisms by which DNA is taken up into the bacterial cell during natural genetic transformation are poorly understood. Although related components essential to the uptake of DNA during transformation have been defined in Gram-negative species, it remains unclear whether DNA binding and uptake are dissociable events. Therefore, DNA uptake has been the earliest definable step in any Gram-negative transformation pathway. In the human pathogen Neisseria gonorrhoeae, sequence-specific DNA uptake requires an intact type IV pili (Tfp) biogenesis machinery along with three molecules that are dispensable for Tfp expression: ComP (a pilin subunit-like molecule), PilT (a cytoplasmic protein involved in pilus retraction) and ComE (a periplasmic protein with intrinsic DNA-binding activity). By conditionally altering the levels of ComP and PilT expression, we show here that DNA binding and uptake are resolvable events. Consequently, we are able to demonstrate that PilT is largely dispensable for functional DNA binding and, therefore, contributes specifically to uptake. Furthermore, sequence specificity in this system is imposed at the level of DNA binding, a process that is influenced by both ComP and PilE. However, sequence-specific DNA binding is not attributable to an intrinsic property of the Tfp subunit protein. Finally, we demonstrate the existence of a robust, non-specific DNA-binding activity associated with the expression of both Tfp and PilT, which is unrelated to transformation but obscures the observation of specific binding events.

Structure of a pilin monomer from Pseudomonas aeruginosa: implications for the assembly of pili

Type IV pilin monomers assemble to form fibers called pili that are required for a variety of bacterial functions. Pilin monomers oligomerize due to the interaction of part of their hydrophobic N-terminal alpha-helix. Engineering of a truncated pilin from Pseudomonas aeruginosa strain K122-4, where the first 28 residues are removed from the N terminus, yields a soluble, monomeric protein. This truncated pilin is shown to bind to its receptor and to decrease morbidity and mortality in mice upon administration 15 min before challenge with a heterologous strain of Pseudomonas. The structure of this truncated pilin reveals an alpha-helix at the N terminus that lies across a 4-stranded antiparallel beta-sheet. A model for a pilus is proposed that takes into account both electrostatic and hydrophobic interactions of pilin subunits as well as previously published x-ray fiber diffraction data. Our model indicates that DNA or RNA cannot pass through the center of the pilus, however, the possibility exists for small organic molecules to pass through indicating a potential mechanism for signal transduction.

Salmonella enteritidis fimbriae displaying a heterologous epitope reveal a uniquely flexible structure and assembly mechanism

Two distinct Salmonella fimbrins, AgfA and SefA, comprising thin aggregative fimbriae SEF17 and SEF14, respectively, were each genetically engineered to carry PT3, an alpha-helical 16-amino acid Leishmania T-cell epitope derived from the metalloprotease gp63. To identify regions within AgfA and SefA fimbrins amenable to replacement with this epitope, PCR-generated chimeric fimbrin genes were constructed and used to replace the native chromosomal agfA and sefA genes in Salmonella enteritidis. Immunoblot analysis using anti-SEF17 and anti-PT3 sera demonstrated that all ten AgfA chimeric fimbrin proteins were expressed by S. enteritidis under normal growth conditions. Immunoelectron microscopy confirmed that eight of the AgfA::PT3 proteins were effectively assembled into cell surface-exposed fimbriae. The PT3 replacements in AgfA altered Congo red (CR) binding, cell-cell adhesion and cell surface properties of S. enteritidis to varying degrees. However, these chimeric fimbriae were still highly stable, being resistant to proteinase K digestion and requiring harsh formic acid treatment for depolymerization. In marked contrast to AgfA, none of the chimeric SefA proteins were expressed or assembled into fimbriae. Since each PT3 replacement constituted over 10% of the AgfA amino acid sequence and all ten replacements collectively represented greater than 75% of the entire AgfA primary sequence, the ability of AgfA to accept large sequence substitutions and still assemble into fibers is unique among fimbriae and other structural proteins. This structural flexibility may be related to the novel fivefold repeating sequence of AgfA and its recently proposed structure Proper formation of chimeric fimbrial fibers suggests an unusual assembly mechanism for thin aggregative fimbriae which tolerates aberrant structures. This study opens a range of possibilities for Salmonella thin aggregative fimbriae as a carrier of heterologous epitopes and as an experimental model for studies of protein structure.

Identification and characterization of ComE and ComF, two novel pilin-like competence factors involved in natural transformation of Acinetobacter sp. strain BD413

Although the high level of competence for natural transformation of Acinetobacter sp. strain BD413 has been the subject of numerous studies, only two competence genes, comC and comP, have been identified to date. By chromosomal walking analysis we found two overlapping open reading frames, designated comE and comF, starting 61 bp downstream of comC. comE and comF are expressed as stable proteins in Escherichia coli, thus proving that they are indeed coding regions, but expression was successful only with 5'-deleted genes. ComE and ComF are similar to pilins and pilin-like components. Both genes were mutated, and the phenotypes of the mutants were analyzed. Natural transformation in comF mutants is 1,000-fold reduced, whereas comE mutants exhibit 10-fold-reduced transformation frequencies. This is clear evidence that comE and comF are involved in natural transformation. However, ComE and ComF are specific for DNA translocation, since comE and comF defects affected neither piliation nor lipase secretion. These results suggest that the type IV pili, the general protein secretion pathway, and the DNA translocation machinery in Acinetobacter sp. strain BD413 are evolutionary related but functionally distinct systems.

Type-4 pilus-structure: outside to inside and top to bottom--a minireview

We have recently proposed a computational model of the N. gonorrhoeae pilus fiber based on the high resolution X-ray crystal structure of the component protein pilin, combined with available biophysical and genetic data [Parge et al. (1995) Nature 378, 32-38]. In parallel, we have used anti-peptide antibodies to distinguish buried and exposed regions of pilin within the assembled fiber [Forest et al. (1996) Infect. Immun. 64, 644-652]. This mini-review addresses the properties of the current pilus model and the locations of end-exposed epitopes. The fiber forms a three-layered structure of coiled conserved alpha helices surrounded by beta-sheet, with the hypervariable region as the most highly exposed portion. Overall the pilus model developed from diffraction and antibody mapping is expected to be representative of type-4 pili with general implications for type-4 assembly, function, and interactions with other proteins and cell membranes.

Fimbrial biogenesis genes of Pseudomonas aeruginosa: pilW and pilX increase the similarity of type 4 fimbriae to the GSP protein-secretion systems and pilY1 encodes a gonococcal PilC homologue

Type 4 fimbriae of Pseudomonas aeruginosa are surface filaments involved in host colonization. They mediate both attachment to host epithelial cells and flagelia-independent twitching motility. Four additional genes, pilW, pilX, pilY1 and pilY2, are located on Spel fragment E in the 5 kb intergenic region between the previously characterized genes pilV and pilE, which encode prepilin-like proteins involved in type 4 fimbrial biogenesis. The phenotypes of a transposon insertion and other mutations constructed by allelic exchange show that these genes are involved in the assembly of type 4 fimbriae. The PilW and PilX proteins are membrane located, possess the hydrophobic N-terminus characteristic of prepilin-like proteins, and appear to belong to the GspJ and GspK group of proteins that are required for protein secretion in a wide range of Gram-negative bacteria. These findings increase the similarities between the fimbrial biogenesis and the Gsp-based protein-secretion supersystems. PilY1 is a large protein with C-terminal homology to the PilC2 protein of Neisseria gonorrhoeae, thought to be a fimbrial tip-associated adhesin, and which, like PilY1, is involved in fimbrial assembly. PilY1 appears to be located in both the membrane and the external fimbrial fractions. PilY2 is a small protein that appears to play a subtle role in fimbrial biogenesis and represents a new class of protein.

Structure of the fibre-forming protein pilin at 2.6 A resolution

The crystallographic structure of Neisseria gonorrhoeae pilin, which assembles into the multifunctional pilus adhesion and virulence factor, reveals an alpha-beta roll fold with a striking 85 A alpha-helical spine and an O-linked disaccharide. Key residues stabilize interactions that allow sequence hypervariability, responsible for pilin's celebrated antigenic variation, within disulphide region beta-strands and connections. Pilin surface shape, hydrophobicity and sequence variation constrain pilus assembly to the packing of flat subunit faces against alpha 1 helices. Helical fibre assembly is postulated to form a core of coiled alpha 1 helices banded by beta-sheet, leaving carbohydrate and hypervariable sequence regions exposed to solvent.

Identification of a gene, pilV, required for type 4 fimbrial biogenesis in Pseudomonas aeruginosa, whose product possesses a pre-pilin-like leader sequence

Type 4 fimbriae are important colonization factors in Pseudomonas aeruginosa and other pathogens that mediate attachment to epithelial cells of the host. They are also responsible for a form of translocation termed 'twitching motility' and are implicated in the susceptibility to fimbrial-specific bacteriophage. Analysis of a transposon mutant which lacks functional fimbriae has identified a new gene which is required for fimbrial biogenesis. This gene, termed pilV, is located on chromosomal SpeI fragment E, 2 kb downstream of the previously characterized pilSR genes involved in transcriptional activation of the fimbrial subunit gene. The pilV gene encodes a 20 kDa membrane-located protein with considerable amino-terminal homology to the type 4 consensus pre-pilin leader sequence, suggesting that it is processed by a leader peptidase. Site-directed mutagenesis has shown that PilV requires such cleavage to be functional. PilV also exhibits close similarity to a group of proteins involved in extracellular protein secretion from a number of Gram-negative bacteria, suggesting that the biogenesis of type 4 fimbriae may have a similar basis.

The pilE gene product of Pseudomonas aeruginosa, required for pilus biogenesis, shares amino acid sequence identity with the N-termini of type 4 prepilin proteins

A new locus required for type 4 pilus biogenesis by Pseudomonas aeruginosa has been identified. A pilE mutant, designated MJ-6, was broadly resistant to pili-specific phages and unable to translocate across solid surfaces by the pilus-dependent mechanism of twitching motility (Twt-). Immunoblot analysis demonstrated that MJ-6 was devoid of pili (Pil-) but was unaffected in the production of unassembled pilin pools. Genetic studies aimed at localizing the pilE mutation on the P. aeruginosa PAO chromosome demonstrated a strong co-linkage between MJ-6 phage resistance and the proB marker located at 71 min. Cloning of the pilE gene was facilitated by the isolation and identification of a pro(B+)-containing plasmid from a PAO1 cosmid library. Upon introduction of the PAO1 proB+ cosmid clone into MJ-6, sensitivity to pili-specific phage, twitching motility and pilus production were restored. The nucleotide sequence of a 1 kb EcoRV-ClaI fragment containing the pilE region revealed a single complete open reading frame with characteristic P. aeruginosa codon bias. PilE, a protein with a molecular weight of 15,278, showed significant sequence identity to the pilin precursors of P. aeruginosa and to other type 4 prepilin proteins. The region of highest homology was localized to the N-terminal 40 amino acid residues. The putative PilE N-terminus contained a seven-residue basic leader sequence followed by a consensus cleavage site for prepilin peptidase and a largely hydrophobic region which contained tyrosine residues (Tyr-24 and Tyr-27) previously implicated in maintaining pilin subunit-subunit interactions. The requirement of PilE in pilus biogenesis was confirmed by demonstrating that chromosomal pilE insertion mutants were pilus- and twitching-motility deficient.

Characterization of type IV pilus genes in plant growth-promoting Pseudomonas putida WCS358

In a search for factors that could contribute to the ability of the plant growth-stimulating Pseudomonas putida WCS358 to colonize plant roots, the organism was analyzed for the presence of genes required for pilus biosynthesis. The pilD gene of Pseudomonas aeruginosa, which has also been designated xcpA, is involved in protein secretion and in the biogenesis of type IV pili. It encodes a peptidase that processes the precursors of the pilin subunits and of several components of the secretion apparatus. Prepilin processing activity could be demonstrated in P. putida WCS358, suggesting that this nonpathogenic strain may contain type IV pili as well. A DNA fragment containing the pilD (xcpA) gene of P. putida was cloned and found to complement a pilD (xcpA) mutation in P. aeruginosa. Nucleotide sequencing revealed, next to the pilD (xcpA) gene, the presence of two additional genes, pilA and pilC, that are highly homologous to genes involved in the biogenesis of type IV pili. The pilA gene encodes the pilin subunit, and pilC is an accessory gene, required for the assembly of the subunits into pili. In comparison with the pil gene cluster in P. aeruginosa, a gene homologous to pilB is lacking in the P. putida gene cluster. Pili were not detected on the cell surface of P. putida itself, not even when pilA was expressed from the tac promoter on a plasmid, indicating that not all the genes required for pilus biogenesis were expressed under the conditions tested. Expression of pilA of P. putida in P. aeruginosa resulted in the production of pili containing P. putida PilA subunits.

Production of Neisseria gonorrhoeae pili (fimbriae) in Pseudomonas aeruginosa

Pseudomonas aeruginosa K/2PfS, when transformed with an expression plasmid harboring the pilin gene (pilE1) of Neisseria gonorrhoeae MS11, was able to express and assemble gonococcal pilin monomers into surface-associated pili, as judged by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, immunoblotting, and immunoelectron microscopy. Concomitant with the expression of gonococcal pili in P. aeruginosa was the virtual loss of production of P. aeruginosa K/2PfS pili normally associated with the host cell.

Morphogenetic expression of Moraxella bovis fimbriae (pili) in Pseudomonas aeruginosa

Type 4 fimbriae (pili) are found in a wide variety of gram-negative bacteria and are composed of small structural subunits which share significant sequence homology among different species, especially at their amino-terminal ends. Previous studies demonstrating morphogenetic expression of Bacteroides nodosus fimbriae from cloned subunit genes in Pseudomonas aeruginosa suggested that there is a common mechanism for type 4 fimbriae assembly and that the structural subunits are interchangeable (J. S. Mattick et al., J. Bacteriol. 169:33-41, 1987). Here we have examined the expression of Moraxella bovis fimbrial subunits in P. aeruginosa. M. bovis subunits were assembled into extracellular fimbriae in this host, in some cases as a homopolymer but in others as a mosaic with the indigenous subunit, indicating structural equivalence. This result contrasts with other studies in which recombinant P. aeruginosa expressing different subunits produced fimbriae composed almost exclusively of one subunit or the other (T. C. Elleman and J. E. Peterson, Mol. Microbiol. 1:377-380, 1987). Both observations can be explained by reversibility of subunit-subunit interactions at the site of assembly, with the forward equilibrium favoring chain extension between compatible subunits.

Secretion of extracellular proteins by Pseudomonas aeruginosa

Pseudomonas aeruginosa is a bacterial species of commercial value secreting numerous extracellular proteins, involved in pathogenesis. Most strains produce at least a lipase, a phospholipase, an alkaline phosphatase, an exotoxin and 2 proteases (elastase and alkaline protease). Various mechanisms for secretion of exoproteins appear to exist in P aeruginosa. Genetic analysis has led to the identification of 2 secretion pathways: i) a "general" secretion pathway, defined by the xcp mutations, which mediates secretion of most extracellular proteins, and; ii) an independent secretion pathway specific for alkaline protease. Our present knowledge on the pathways and components of the secretion machinery in P aeruginosa is reviewed in this article.