Nucleotide sequence analysis and expression of the minimum REPI replication region and incompatibility determinants of pColV-K30

Plasmid-Encoded Iron Uptake Systems

Plasmids confer genetic information that benefits the bacterial cells containing them. In pathogenic bacteria, plasmids often harbor virulence determinants that enhance the pathogenicity of the bacterium. The ability to acquire iron in environments where it is limited, for instance the eukaryotic host, is a critical factor for bacterial growth. To acquire iron, bacteria have evolved specific iron uptake mechanisms. These systems are often chromosomally encoded, while those that are plasmid-encoded are rare. Two main plasmid types, ColV and pJM1, have been shown to harbor determinants that increase virulence by providing the cell with essential iron for growth. It is clear that these two plasmid groups evolved independently from each other since they do not share similarities either in the plasmid backbones or in the iron uptake systems they harbor. The siderophores aerobactin and salmochelin that are found on ColV plasmids fall in the hydroxamate and catechol group, respectively, whereas both functional groups are present in the anguibactin siderophore, the only iron uptake system found on pJM1-type plasmids. Besides siderophore-mediated iron uptake, ColV plasmids carry additional genes involved in iron metabolism. These systems include ABC transporters, hemolysins, and a hemoglobin protease. ColV- and pJM1-like plasmids have been shown to confer virulence to their bacterial host, and this trait can be completely ascribed to their encoded iron uptake systems.

Sequence of conjugative plasmid pIP1206 mediating resistance to aminoglycosides by 16S rRNA methylation and to hydrophilic fluoroquinolones by efflux

Self-transferable IncFI plasmid pIP1206, isolated from an Escherichia coli clinical isolate, carries two new resistance determinants: qepA, which confers resistance to hydrophylic fluoroquinolones by efflux, and rmtB, which specifies a 16S rRNA methylase conferring high-level aminoglycoside resistance. Analysis of the 168,113-bp sequence (51% G+C) revealed that pIP1206 was composed of several subregions separated by copies of insertion sequences. Of 151 open reading frames, 56 (37%) were also present in pRSB107, isolated from a bacterium in a sewage treatment plant. pIP1206 contained four replication regions (RepFIA, RepFIB, and two partial RepFII regions) and a transfer region 91% identical with that of pAPEC-O1-ColBM, a plasmid isolated from an avian pathogenic E. coli. A putative oriT region was found upstream from the transfer region. The antibiotic resistance genes tet(A), catA1, bla(TEM-1), rmtB, and qepA were clustered in a 33.5-kb fragment delineated by two IS26 elements that also carried a class 1 integron, including the sulI, qacEDelta1, aad4, and dfrA17 genes and Tn10, Tn21, and Tn3-like transposons. The plasmid also possessed a raffinose operon, an arginine deiminase pathway, a putative iron acquisition gene cluster, an S-methylmethionine metabolism operon, two virulence-associated genes, and a type I DNA restriction-modification (R-M) system. Three toxin/antitoxin systems and the R-M system ensured stabilization of the plasmid in the host bacteria. These data suggest that the mosaic structure of pIP1206 could have resulted from recombination between pRSB107 and a pAPEC-O1-ColBM-like plasmid, combined with structural rearrangements associated with acquisition of additional DNA by recombination and of mobile genetic elements by transposition.

Functional analysis of ori1 and repA of the R-plasmid pSJ5.6 from Neisseria gonorrhoeae

The functional ori1 of the 5.6kb gonococcal R-plasmid pSJ5.6 contains an A-T rich region followed by four 22bp direct repeats and one 19bp inverted repeat. The replication region of the plasmid also contains a gene encoding for a 39kD RepA protein. We have further assessed the functionality of the replication region in pSJ5.6, an-iteron type plasmid, using in vivo complementation assays in Escherichia coli. A 2.1kb PstI-RsaI fragment containing the ori1 and repA gene of pSJ5.6 was cloned into vector pZErO -2 to obtain pZA-MRR. The pUC origin in pZA-MRR was deleted to render the plasmid dependable on the cis-acting ori1 for replication. The resulting plasmid, pMRR, was capable of replication and maintenance in E. coli. We also cloned the ori1 and repA gene separately to obtain pA-Ori and pZG-Rep, respectively. Using in vivo complementation assays, we demonstrated that the ori1(+) plasmid (pA-Ori) was maintained only when the RepA protein was supplied in trans by the high copy number plasmid pZG-Rep.

The 120 592 bp IncF plasmid pRSB107 isolated from a sewage-treatment plant encodes nine different antibiotic-resistance determinants, two iron-acquisition systems and other putative virulence-associated functions

The antibiotic-multiresistance IncF plasmid pRSB107 was isolated by a transformation-based approach from activated-sludge bacteria of a wastewater-treatment plant. It confers resistance to ampicillin, penicillin G, chloramphenicol, erythromycin, kanamycin, neomycin, streptomycin, sulfonamides, tetracycline and trimethoprim and against mercuric ions. Complete sequencing of this plasmid revealed that it is 120 592 bp in size and has a G+C content of 53.1 mol%. The plasmid backbone is composed of three replicons, RepFIA, RepFIB and RepFII, which are almost identical to corresponding regions located on the F-plasmid and on R100. The three replicons encode replication initiation (rep) and replication control, multimer resolution (mrs), post-segregational killing of plasmid-free cells (psk) and active plasmid partitioning (sopABC locus). Part of the F-leading region and remnants of the F-homologous DNA-transfer (tra) module complete the pRSB107 backbone. Plasmid pRSB107 contains a complex, highly mosaic 35 991 bp antibiotic-resistance region consisting of a Tn21- and a Tn10-derivative and a chloramphenicol-resistance module. The Tn21 derivative is composed of a mercury-resistance region (mer), a Tn4352B-like kanamycin/neomycin-resistance transposon, a streptomycin/sulfonamide-resistance module, remnants of the beta-lactam-resistance transposon Tn1, a macrolide-resistance module flanked by copies of IS26 and IS6100, remnants of Tn402 integrating a class 1 integron and the Tn21-specific transposition module. A truncated version of the tetracycline-resistance transposon Tn10 and the chloramphenicol acetyltransferase gene catA complete the pRSB107 resistance region. In addition to antibiotic resistance, pRSB107 encodes the following putative virulence-associated functions: (i) an aerobactin iron-acquisition siderophore system (iuc/iut); (ii) a putative high-affinity Fe(2+) uptake system which was previously identified on a pathogenicity island of Yersinia pestis and in the genome of the phytopathogen Erwinia carotovora subsp. atroseptica SCRI1043; (iii) an sn-glycerol-3-phosphate transport system (ugp); and (iv) the virulence-associated genes vagCD having a possible function in stable plasmid inheritance. All the accessory modules are framed by insertion sequences, indicating that pRSB107 was gradually assembled by integration of different horizontally acquired DNA segments via transposition or homologous recombination.

Analysis of the replication elements of the pMJ101 plasmid from the fish pathogen Vibrio ordalii

Vibrio ordalii is a major cause of vibriosis in wild and cultured marine salmonids and carries pMJ101, a 30-kb cryptic plasmid that replicates in the absence of DNA polymerase I without producing single-stranded intermediates. A recombinant derivative harboring the pMJ101 replication region proved to be compatible with pJM1, a plasmid containing the iron acquisition system required for the virulence of V. anguillarum 775, another important pathogen that causes vibriosis. Sequence analysis of a 1.56-kb fragment harboring the pMJ101 replication region revealed the presence of typical features found in DNA origins including an AT-rich region, 11 dam-methylation sites of which 5 are within the putative ori region, and five copies of the 9-bp consensus sequence for DnaA binding. Gel retardation assays demonstrated that the latter replication element indeed binds DnaA purified from Escherichia coli. A potential open reading frame encoding a hydrophilic protein with a predicted pI of 10.3 and an M(r) of 33,826 was found adjacent to the ori region. Although these properties are typical of DNA-binding proteins, no significant homology was found between this predicted protein, named RepM, and other previously characterized proteins. Reverse transcriptase-polymerase chain reaction analysis of total RNA demonstrated the presence of repM mRNA in V. ordalii. The major initiation site of this mRNA was located 187 nucleotides upstream of the GTG initiation codon as determined by nuclease S1 protection assays. This transcription initiation site is preceded by putative -10 and -35 promoter sequences that control the expression of the repM replication gene. These results demonstrate that the replication region of pMJ101 shares some structural and sequence similarities with other DNA replication regions, which include DnaA binding and methylation sites and an open reading frame encoding a distinct protein required for its replication.

Replication and control of circular bacterial plasmids

An essential feature of bacterial plasmids is their ability to replicate as autonomous genetic elements in a controlled way within the host. Therefore, they can be used to explore the mechanisms involved in DNA replication and to analyze the different strategies that couple DNA replication to other critical events in the cell cycle. In this review, we focus on replication and its control in circular plasmids. Plasmid replication can be conveniently divided into three stages: initiation, elongation, and termination. The inability of DNA polymerases to initiate de novo replication makes necessary the independent generation of a primer. This is solved, in circular plasmids, by two main strategies: (i) opening of the strands followed by RNA priming (theta and strand displacement replication) or (ii) cleavage of one of the DNA strands to generate a 3'-OH end (rolling-circle replication). Initiation is catalyzed most frequently by one or a few plasmid-encoded initiation proteins that recognize plasmid-specific DNA sequences and determine the point from which replication starts (the origin of replication). In some cases, these proteins also participate directly in the generation of the primer. These initiators can also play the role of pilot proteins that guide the assembly of the host replisome at the plasmid origin. Elongation of plasmid replication is carried out basically by DNA polymerase III holoenzyme (and, in some cases, by DNA polymerase I at an early stage), with the participation of other host proteins that form the replisome. Termination of replication has specific requirements and implications for reinitiation, studies of which have started. The initiation stage plays an additional role: it is the stage at which mechanisms controlling replication operate. The objective of this control is to maintain a fixed concentration of plasmid molecules in a growing bacterial population (duplication of the plasmid pool paced with duplication of the bacterial population). The molecules involved directly in this control can be (i) RNA (antisense RNA), (ii) DNA sequences (iterons), or (iii) antisense RNA and proteins acting in concert. The control elements maintain an average frequency of one plasmid replication per plasmid copy per cell cycle and can "sense" and correct deviations from this average. Most of the current knowledge on plasmid replication and its control is based on the results of analyses performed with pure cultures under steady-state growth conditions. This knowledge sets important parameters needed to understand the maintenance of these genetic elements in mixed populations and under environmental conditions.

Genetic map of the virulence plasmid of Salmonella enteritidis and nucleotide sequence of its replicons

Partial sequencing of a genomic library of the virulence plasmid of Salmonella enteritidis has been used to localize in the restriction map of this plasmid the genetic loci already described in other Salmonella plasmids. The comparison of the vestigial tra region with the corresponding genes in the F plasmid allowed us to define the extent of the deletions that the S. enteritidis plasmid should have suffered. The putative replicons of the plasmid, repB and repC, were isolated and both proved to be functional in Escherichia coli, but repC was segregationally unstable. The nucleotide sequence of repB showed the typical organization of RepFIIA replicons, although the similarity was lower than usual in this group of replicons. The highest homology was found with the replicon of the virulence plasmid pYVe439-80 from Yersinia enterocolitica (72.5%). Replicon repC also showed a maximum identity of 72.6% with known replicons, namely the RepFIB of pColV-K30 and P307, both virulence plasmids isolated from E. coli. We conclude that the S. enteritidis plasmid could arise from the S. typhimurium plasmid through deletions, and that they are evolutionary distant from other IncFI and IncFII plasmids.

Enteropathogenic Escherichia coli: identification of a gene cluster coding for bundle-forming pilus morphogenesis

Sequence flanking the bfpA locus on the enteroadherent factor plasmid of the enteropathogenic Escherichia coli (EPEC) strain B171-8 (O111:NM) was obtained to identify genes that might be required for bundle-forming pilus (BFP) biosynthesis. Deletion experiments led to the identification of a contiguous cluster of at least 12 open reading frames, including bfpA, that could direct the synthesis of a morphologically normal BFP filament. Within the bfp gene cluster, we identified open reading frames that share homology with other type IV pilus accessory genes and with genes required for transformation competence and protein secretion. Immediately upstream of the bfp gene cluster, we identified a potential replication origin including genes that are predicted to encode proteins homologous with replicase and resolvase. Restriction fragment length polymorphism analysis of DNA from six additional EPEC serotypes showed that the organization of the bfp gene cluster and its juxtaposition with a potential plasmid origin of replication are highly conserved features of the EPEC biotype.

Molecular analysis of RepHI1A, a minimal replicon of the IncHI1 plasmid R27

R27, a large conjugative plasmid of the HI incompatibility group, was subjected to a subcloning analysis which revealed the presence of a Poll-independent replicon and determinants contributing to incompatibility within a 2.7 kb SalI/XbaI fragment. The DNA sequence of the minimal replicon revealed the presence of a large open reading frame (ORF) as well two sets of 19 bp repeated oligonucleotides (iterons), in addition to characteristic Escherichia coli origin elements. The protein encoded by the ORF possesses homology with replication initiator proteins encoded by a number of plasmids from different incompatibility groups. Deletion analysis suggested that the iterons are responsible for incompatibility reactions. Dissection of the replicon confirmed this and defined a minimal origin of 230 bp. The putative replication initiator was expressed in an in vitro transcription-translation system, and the 5' end of the mRNA encoding its synthesis was identified. Transcriptional fusion of the repA promoter to lacZ demonstrated an autoregulatory function of RepA. A series of iterons present downstream of the RepA coding sequence are dispensable but are responsible for copy-number control. The minimal replicon appears to be partition-defective.

Regulatory interactions between RepA, an essential replication protein, and the DNA repeats of RepFIB from plasmid P307

The control of RepFIB replication appears to rely on the interaction between an initiator protein (RepA) and two sets of DNA repeat elements located on either side of the repA gene (BCDD'D" and EFGHIJ). In vivo genetic tests demonstrate that the BCDD'D" repeats form part of the origin of replication, while some of the downstream repeat elements (HIJ) are involved in the sensing and setting of plasmid copy number. RepA DNA binding to these groups of repeats has been investigated in vivo by utilizing the fact that the replicon contains three active promoters (orip, repAp, and EFp), one of which has previously been shown to control the expression of repA (repAp). All three promoters are closely associated with the repeat elements flanking repA, and an investigation using lacZ or cml gene fusions has demonstrated that RepA expressed in trans is able to repress each promoter. However, these assays suggest that the transcriptional responses of orip and repAp to RepA repression are significantly different, despite the fact that both promoters are embedded within the BCDD'D" repeat elements. Extra copies of the BCDD'D" or EFG repeats in trans have no effect on RepA repression of repAp embedded in a second copy of the BCDD'D" repeats, but copies of the HIJ or EFGHIJ repeats are able to derepress repAp, suggesting that there is a fundamental difference between RepA-BCDD'D" or -HIJ complexes and RepA-EFG or -EFGHIJ complexes.

Functional characterization of a replication initiator protein

Functional domains in the RepI replication initiator protein have been identified by classical and site-directed mutagenesis techniques. Mutations conferring an increase in plasmid copy number contained alterations in a key position of a putative helix-turn-helix DNA binding motif. The mutations did not appear to affect autorepressing functions. Regions of RepI important for autorepression were localized as well. Two classes of mutations resulting in diminished autorepression functions were identified. One class was distinguished by an elevated copy number, while the other class remained at the wild-type copy number level. Analysis of the various mutations leading to changes in copy number or autorepressing functions suggest that in some cases the autorepression and initiating functions of the RepI protein are separable. Finally, analysis with deletion clones suggests that the trans-acting autorepressing functions of RepI might depend on intermolecular coupling control.

Expression and regulation of the RepA protein of the RepFIB replicon from plasmid P307

The control of RepFIB replication appears to rely on the interaction between an initiator protein (RepA) and two sets of DNA repeat elements located on either side of the repA gene. Limited N-terminal sequence information obtained from a RepA:beta-galactosidase fusion protein indicates that although the first residue of RepA is methionine, the initiation of translation of RepA occurs from a CTG codon rather than from the predicted GTG codon located further downstream. Overexpressed RepA in trans is capable of repressing a repA:lacZ fusion plasmid in which the expression of the fusion protein is under the control of the repA promoter. The repA promoter has been located functionally by testing a series of repA:lacZ fusion plasmids. Both in vivo genetic tests and in vitro DNA-binding studies indicate that repA autoregulation can be achieved by RepA binding to one or more repeat elements which overlap the repA promoter sequence.

Co-operative autoregulation of a replication protein gene

In this work we present the localization and characterization of the repl promoter (Prepl) and show aspects of the regulation. Comparison of Prepl with other autoregulated replication protein gene promoters revealed similarities, but Prepl differs from some of these characterized promoters in not being regulated by the heat-shock RNA polymerase. Primer extension analysis showed that Prepl is contained within five helically aligned 18 base pair repeats, or 18-mers of the previously defined minimal origin. In addition, we find that Prepl is autoregulated by a trans-acting product encoded in the REPI region. Purified Repl protein binds to the 18-mer region of the origin, suggesting that the repl gene is autoregulated by the protein product. The autoregulation appears to be co-operative since decreasing the 18-mer binding site region results in a concomitant non-linear loss of autorepression. The deletion derivatives show a decreased ability to bind the Repl protein when compared with origin DNA containing all of the binding region. The diminished capacity of the various deletion derivatives to bind Repl in vitro correlates with the loss of autorepression seen in vivo.

Colicin V virulence plasmids

ColV plasmids are a heterogeneous group of IncFI plasmids which encode virulence-related properties such as the aerobactin iron uptake system, increased serum survival, and resistance to phagocytosis. These plasmids have been found in invasive strains of Escherichia coli which infect vertebrate hosts including humans and livestock. Colicin V was the first colicin to be identified, in 1925, but not until the field experienced a renewed interest has the mechanism of colicin V activity been explored. As encoded by ColV plasmid pColV-K30, the aerobactin iron uptake system has been extensively investigated, but other ColV-encoded phenotypes remain largely uncharacterized. Restriction enzyme mapping of the 144-kb pColV-K30 and of the 80-kb pColV-B188 has facilitated systematic study, so that questions can be addressed by a molecular and comparative approach regarding the contributions of individual factors and plasmids to the virulence of host E. coli in model systems. The family of large ColV plasmids could be analogous to other families of large virulence plasmids, and insights gained from studying these plasmids should contribute to our understanding of cross-genetic interactions and the role of large plasmids in bacterial pathogenesis.

Roles of DNA adenine methylation in controlling replication of the REPI replicon of plasmid pColV-K30

DNA adenine methylation controls DNA replication of plasmids containing the prototypic REPI replicon by affecting protein recognition and by altering the helical stability of the origin. Denaturing gradient gel electrophoresis shows that adenine methylated origin DNA is more easily melted than unmethylated. However, because an added DNA adenine methylation (dam) site at the origin, whether in or out of phase with other helically aligned dam sites, actually prevents replication, we conclude that destabilization of the helix is not the exclusive function of adenine methylation in REPI replication. We find that the conformation and degree of methylation at the origin, features which are important for protein recognition, are essential for replication. In fact, RepI, a protein required for replication initiation at REPI replicons, contains a region homologous with a domain in proteins which specifically recognize and bind 5'-GATC-3'. We propose that the dam sites in the origin play a dual role: one is destabilization of the helix, and the other is protein recognition.

CoIV plasmids pCoIV-B188 and pCoIV-K30: genetic maps according to restriction enzyme sites and landmark phenotypic characteristics

The CoIV plasmids are large virulence plasmids of the incompatibility group IncFI. We have obtained the genetic maps of two of the most studied CoIV plasmids, pCoIV-B188 and pCoIV-K30, according to restriction enzyme sites and landmark phenotypic characteristics such as colicin V, the aerobactin iron uptake system, the transfer region, replication regions, and repeated sequences. Although the two plasmids differ in size (pCoIV-B188 is 80 kb and pCoIV-K30 is 144 kb), the maps reveal many regions which are apparently identical or very similar.