Partitioning of broad-host-range plasmid RP4 is a complex system involving site-specific recombination

Decoding the TAome and computational insights into parDE toxin-antitoxin systems in Pseudomonas aeruginosa

Toxin-antitoxin (TA) modules are widely found in the genomes of pathogenic bacteria. They regulate vital cellular functions like transcription, translation, and DNA replication, and are therefore essential to the survival of bacteria under stress. With a focus on the type II parDE modules, this study thoroughly examines TAome in Pseudomonas aeruginosa, a bacterium well-known for its adaptability and antibiotic resistance. We explored the TAome in three P. aeruginosa strains: ATCC 27,853, PAO1, and PA14, and found 15 type II TAs in ATCC 27,853, 12 in PAO1, and 13 in PA14, with significant variation in the associated mobile genetic elements. Five different parDE homologs were found by further TAome analysis in ATCC 27,853, and their relationships were confirmed by sequence alignments and precise genomic positions. After comparing these ParDE modules' sequences to those of other pathogenic bacteria, it was discovered that they were conserved throughout many taxa, especially Proteobacteria. Nucleic acids were predicted as potential ligands for ParD antitoxins, whereas ParE toxins interacted with a wide range of small molecules, indicating a diverse functional repertoire. The interaction interfaces between ParDE TAs were clarified by protein-protein interaction networks and docking studies, which also highlighted important residues involved in binding. This thorough examination improves our understanding of the diversity, evolutionary dynamics, and functional significance of TA systems in P. aeruginosa, providing insights into their roles in bacterial physiology and pathogenicity.

Degradation of Antibiotic Resistance Genes by VADER with CRISPR-Cas Immunity

The evolution and dissemination of antibiotic resistance genes (ARGs) are prompting severe health and environmental issues. While environmental processes, e.g., biological wastewater treatment, are key barriers to prevent the spread of ARGs, they are often sources of ARGs at the same time, requiring upgraded biotechnology. Here, we present VADER, a synthetic biology system for the degradation of ARGs based on CRISPR-Cas immunity, an archaeal and bacterial immune system for eliminating invading foreign DNAs, to be implemented for wastewater treatment processes. Navigated by programmable guide RNAs, VADER targets and degrades ARGs depending on their DNA sequences, and by employing an artificial conjugation machinery, IncP, it can be delivered via conjugation. The system was evaluated by degrading plasmid-borne ARGs in Escherichia coli and further demonstrated via the elimination of ARGs on the environmentally relevant RP4 plasmid in Pseudomonas aeruginosa. Next, a prototype conjugation reactor at a 10-mL scale was devised, and 100% of the target ARG was eliminated in the transconjugants receiving VADER, giving a proof of principle for the implementation of VADER in bioprocesses. By generating a nexus of synthetic biology and environmental biotechnology, we believe that our work is not only an enterprise for tackling ARG problems but also a potential solution for managing undesired genetic materials in general in the future. IMPORTANCE Antibiotic resistance has been causing severe health problems and has led to millions of deaths in recent years. Environmental processes, especially those of the wastewater treatment sector, are an important barrier to the spread of antibiotic resistance from the pharmaceutical industry, hospitals, or civil sewage. However, they have been identified as a nonnegligible source of antibiotic resistance at the same time, as antibiotic resistance with its main cause, antibiotic resistance genes (ARGs), may accumulate in biological treatment units. Here, we transplanted the CRISPR-Cas system, an immune system via programmable DNA cleavage, to tackle the antibiotic resistance problem raised in wastewater treatment processes, and we propose a new sector specialized in ARG removal with a conjugation reactor to implement the CRISPR-Cas system. Our study provides a new angle for resolving public health issues via the implementation of synthetic biology in environmental contexts at the process level.

Target Lines for in Planta Gene Stacking in Japonica Rice

The clustering of transgenes at a chromosome location minimizes the number of segregating loci that needs to be introgressed to field cultivars. Transgenes could be efficiently stacked through site-specific recombination and a recombinase-mediated in planta gene stacking process was described previously in tobacco based on the Mycobacteriophage Bxb1 site-specific integration system. Since this process requires a recombination site in the genome, this work describes the generation of target sites in the Japonica rice genome. Agrobacterium-mediated gene transfer yielded ~4000 random-insertion lines. Seven lines met the criteria of being single copy, not close to a centromere, not inserted within or close to a known gene or repetitive DNA, having precise recombination site sequences on both ends, and able to express the reporter gene. Each target line tested was able to accept the site-specific integration of a new gfp-containing plasmid and in three of those lines, we regenerated fertile plants. These target lines could be used as foundation lines for stacking new traits into Japonica rice.

Synthetic biology toolkit for engineering Cupriviadus necator H16 as a platform for CO2 valorization

BACKGROUND

CO₂ valorization is one of the effective methods to solve current environmental and energy problems, in which microbial electrosynthesis (MES) system has proved feasible and efficient. Cupriviadus necator (Ralstonia eutropha) H16, a model chemolithoautotroph, is a microbe of choice for CO₂ conversion, especially with the ability to be employed in MES due to the presence of genes encoding [NiFe]-hydrogenases and all the Calvin-Benson-Basham cycle enzymes. The CO₂ valorization strategy will make sense because the required hydrogen can be produced from renewable electricity independently of fossil fuels.

MAIN BODY

In this review, synthetic biology toolkit for C. necator H16, including genetic engineering vectors, heterologous gene expression elements, platform strain and genome engineering, and transformation strategies, is firstly summarized. Then, the review discusses how to apply these tools to make C. necator H16 an efficient cell factory for converting CO₂ to value-added products, with the examples of alcohols, fatty acids, and terpenoids. The review is concluded with the limitation of current genetic tools and perspectives on the development of more efficient and convenient methods as well as the extensive applications of C. necator H16.

CONCLUSIONS

Great progress has been made on genetic engineering toolkit and synthetic biology applications of C. necator H16. Nevertheless, more efforts are expected in the near future to engineer C. necator H16 as efficient cell factories for the conversion of CO₂ to value-added products.

Transcriptome Analysis of Zygotic Induction During Conjugative Transfer of Plasmid RP4

Conjugative transfer of bacterial plasmid is one of the major mechanisms of horizontal gene transfer, which is mediated by direct contact between donor and recipient cells. Gene expression of a conjugative plasmid is tightly regulated mostly by plasmid-encoded transcriptional regulators, but it remains obscure how differently plasmid genes are expressed in each cell during the conjugation event. Here, we report a comprehensive analysis of gene expression during conjugative transfer of plasmid RP4, which is transferred between isogenic strains of Pseudomonas putida KT2440 at very high frequency. To discriminate the expression changes in the donor and recipient cells, we took advantage of conjugation in the presence of rifampicin (Rif). Within 10 min of mating, we successfully detected transient transcription of plasmid genes in the resultant transconjugant cells. This phenomenon known as zygotic induction is likely attributed to derepression of multiple RP4-encoded repressors. Interestingly, we also observed that the traJIH operon encoding relaxase and its auxiliary proteins were upregulated specifically in the donor cells. Identification of the 5′ end of the zygotically induced traJ mRNA confirmed that the transcription start site of traJ was located 24-nt upstream of the nick site in the origin of transfer (oriT) as previously reported. Since the traJ promoter is encoded on the region to be transferred first, the relaxase may be expressed in the donor cell after regeneration of the oriT-flanking region, which in itself is likely to displace the autogenous repressors around oriT. This study provides new insights into the regulation of plasmid transfer processes.

A versatile and robust Agrobacterium-based gene stacking system generates high-quality transgenic Arabidopsis plants

Biotechnology provides a means for the rapid genetic improvement of plants. Although single genes have been important in engineering herbicide and pest tolerance traits in crops, future improvements of complex traits like yield and nutritional quality will likely require the introduction of multiple genes. This research reports a system (GAANTRY; Gene Assembly in Agrobacterium by Nucleic acid Transfer using Recombinase technologY) for the flexible, in vivo stacking of multiple genes within an Agrobacterium virulence plasmid Transfer-DNA (T-DNA). The GAANTRY system utilizes in vivo transient expression of unidirectional site-specific recombinases and an alternating selection scheme to sequentially assemble multiple genes into a single transformation construct. To demonstrate GAANTRY's capabilities, 10 cargo sequences were sequentially stacked together to produce a 28.5-kbp T-DNA, which was used to generate hundreds of transgenic events. Approximately 90% of the events identified using a dual antibiotic selection screen exhibited all of the introduced traits. A total of 68% of the tested lines carried a single copy of the selection marker transgene located near the T-DNA left border, and only 8% contained sequence from outside the T-DNA. The GAANTRY system can be modified to easily accommodate any method of DNA assembly and generate high-quality transgenic plants, making it a powerful, yet simple to use tool for plant genetic engineering.

Small serine recombination systems ParA-MRS and CinH-RS2 perform precise excision of plastid DNA

Selectable marker genes (SMGs) are necessary for selection of transgenic plants. However, once stable transformants have been identified, the marker gene is no longer needed. In this study, we demonstrate the use of the small serine recombination systems, ParA-MRS and CinH-RS2, to precisely excise a marker gene from the plastid genome of tobacco. Transplastomic plants transformed with the pTCH-MRS and pTCH-RS2 vectors, containing the visual reporter gene DsRed flanked by directly oriented MRS and RS2 recognition sites, respectively, were crossed with nuclear-genome transformed tobacco plants expressing plastid-targeted ParA and CinH recombinases, respectively. One hundred per cent of both types of F1 hybrids exhibited excision of the DsRed marker gene. PCR and Southern blot analyses of DNA from F2 plants showed that approximately 30% (CinH-RS2) or 40% (ParA-MRS) had lost the recombinase genes by segregation. The postexcision transformed plastid genomes were stable and the excision events heritable. The ParA-MRS and CinH-RS2 recombination systems will be useful tools for site-specific manipulation of the plastid genome and for generating marker-free plants, an essential step for reuse of SMG and for addressing concerns about the presence of antibiotic resistance genes in transgenic plants.

Towards effective non-viral gene delivery vector

Despite very good safety records, clinical trials using plasmid DNA failed due to low transfection efficiency and brief transgene expression. Although this failure is both due to poor plasmid design and to inefficient delivery methods, here we will focus on the former. The DNA elements like CpG motifs, selection markers, origins of replication, cryptic eukaryotic signals or nuclease-susceptible regions and inverted repeats showed detrimental effects on plasmids' performance as biopharmaceuticals. On the other hand, careful selection of promoter, polyadenylation signal, codon optimization and/or insertion of introns or nuclear-targeting sequences for therapeutic protein expression can enhance the clinical efficacy. Minimal vectors, which are devoid of the bacterial backbone and consist exclusively of the eukaryotic expression cassette, demonstrate better performance in terms of expression levels, bioavailability, transfection rates and increased therapeutic effects. Although the results are promising, minimal vectors have not taken over the conventional plasmids in clinical trials due to challenging manufacturing issues.

Metabolic engineering in chemolithoautotrophic hosts for the production of fuels and chemicals

The ability of autotrophic organisms to fix CO2 presents an opportunity to utilize this 'greenhouse gas' as an inexpensive substrate for biochemical production. Unlike conventional heterotrophic microorganisms that consume carbohydrates and amino acids, prokaryotic chemolithoautotrophs have evolved the capacity to utilize reduced chemical compounds to fix CO2 and drive metabolic processes. The use of chemolithoautotrophic hosts as production platforms has been renewed by the prospect of metabolically engineered commodity chemicals and fuels. Efforts such as the ARPA-E electrofuels program highlight both the potential and obstacles that chemolithoautotrophic biosynthetic platforms provide. This review surveys the numerous advances that have been made in chemolithoautotrophic metabolic engineering with a focus on hydrogen oxidizing bacteria such as the model chemolithoautotrophic organism (Ralstonia), the purple photosynthetic bacteria (Rhodobacter), and anaerobic acetogens. Two alternative strategies of microbial chassis development are considered: (1) introducing or enhancing autotrophic capabilities (carbon fixation, hydrogen utilization) in model heterotrophic organisms, or (2) improving tools for pathway engineering (transformation methods, promoters, vectors etc.) in native autotrophic organisms. Unique characteristics of autotrophic growth as they relate to bioreactor design and process development are also discussed in the context of challenges and opportunities for genetic manipulation of organisms as production platforms.

Recombinase technology: applications and possibilities

The use of recombinases for genomic engineering is no longer a new technology. In fact, this technology has entered its third decade since the initial discovery that recombinases function in heterologous systems (Sauer in Mol Cell Biol 7(6):2087-2096, 1987). The random insertion of a transgene into a plant genome by traditional methods generates unpredictable expression patterns. This feature of transgenesis makes screening for functional lines with predictable expression labor intensive and time consuming. Furthermore, an antibiotic resistance gene is often left in the final product and the potential escape of such resistance markers into the environment and their potential consumption raises consumer concern. The use of site-specific recombination technology in plant genome manipulation has been demonstrated to effectively resolve complex transgene insertions to single copy, remove unwanted DNA, and precisely insert DNA into known genomic target sites. Recombinases have also been demonstrated capable of site-specific recombination within non-nuclear targets, such as the plastid genome of tobacco. Here, we review multiple uses of site-specific recombination and their application toward plant genomic engineering. We also provide alternative strategies for the combined use of multiple site-specific recombinase systems for genome engineering to precisely insert transgenes into a pre-determined locus, and removal of unwanted selectable marker genes.

Functional characterization of replication and stability factors of an incompatibility group P-1 plasmid from Xylella fastidiosa

Xylella fastidiosa strain riv11 harbors a 25-kbp plasmid (pXF-RIV11) belonging to the IncP-1 incompatibility group. Replication and stability factors of pXF-RIV11 were identified and used to construct plasmids able to replicate in X. fastidiosa and Escherichia coli. Replication in X. fastidiosa required a 1.4-kbp region from pXF-RIV11 containing a replication initiation gene (trfA) and the adjacent origin of DNA replication (oriV). Constructs containing trfA and oriV from pVEIS01, a related IncP-1 plasmid of the earthworm symbiont Verminephrobacter eiseniae, also were competent for replication in X. fastidiosa. Constructs derived from pXF-RIV11 but not pVEIS01 replicated in Agrobacterium tumefaciens, Xanthomonas campestris, and Pseudomonas syringae. Although plasmids bearing replication elements from pXF-RIV11 or pVEIS01 could be maintained in X. fastidiosa under antibiotic selection, removal of selection resulted in plasmid extinction after 3 weekly passages. Addition of a toxin-antitoxin addiction system (pemI/pemK) from pXF-RIV11 improved plasmid stability such that >80 to 90% of X. fastidiosa cells retained plasmid after 5 weekly passages in the absence of antibiotic selection. Expression of PemK in E. coli was toxic for cell growth, but toxicity was nullified by coexpression of PemI antitoxin. Deletion of N-terminal sequences of PemK containing the conserved motif RGD abolished toxicity. In vitro assays revealed a direct interaction of PemI with PemK, suggesting that antitoxin activity of PemI is mediated by toxin sequestration. IncP-1 plasmid replication and stability factors were added to an E. coli cloning vector to constitute a stable 6.0-kbp shuttle vector (pXF20-PEMIK) suitable for use in X. fastidiosa.

Plasmid addiction systems: perspectives and applications in biotechnology

Biotechnical production processes often operate with plasmid-based expression systems in well-established prokaryotic and eukaryotic hosts such as Escherichia coli or Saccharomyces cerevisiae, respectively. Genetically engineered organisms produce important chemicals, biopolymers, biofuels and high-value proteins like insulin. In those bioprocesses plasmids in recombinant hosts have an essential impact on productivity. Plasmid-free cells lead to losses in the entire product recovery and decrease the profitability of the whole process. Use of antibiotics in industrial fermentations is not an applicable option to maintain plasmid stability. Especially in pharmaceutical or GMP-based fermentation processes, deployed antibiotics must be inactivated and removed. Several plasmid addiction systems (PAS) were described in the literature. However, not every system has reached a full applicable state. This review compares most known addiction systems and is focusing on biotechnical applications.

Novel Tn4371-ICE like element in Ralstonia pickettii and genome mining for comparative elements

Background

Integrative Conjugative Elements (ICEs) are important factors in the plasticity of microbial genomes. An element related to the ICE Tn4371 was discovered during a bioinformatic search of the Ralstonia pickettii 12J genome. This element was analysed and further searches carried out for additional elements.

A PCR method was designed to detect and characterise new elements of this type based on this scaffold and a culture collection of fifty-eight Ralstonia pickettii and Ralstonia insidiosa strains were analysed for the presence of the element.

Results

Comparative sequence analysis of bacterial genomes has revealed the presence of a number of uncharacterised Tn4371-like ICEs in the genomes of several β and γ- Proteobacteria. These elements vary in size, GC content, putative function and have a mosaic-like structure of plasmid- and phage-like sequences which is typical of Tn4371-like ICEs. These elements were found after a through search of the GenBank database. The elements, which are found in Ralstonia, Delftia, Acidovorax, Bordetella, Comamonas, Acidovorax, Congregibacter, Shewanella, Pseudomonas Stenotrophomonas, Thioalkalivibrio sp. HL-EbGR7, Polaromonas, Burkholderia and Diaphorobacter sp. share a common scaffold. A PCR method was designed (based on the Tn4371- like element detected in the Ralstonia pickettii 12J genome) to detect and characterise new elements of this type.

Conclusion

All elements found in this study possess a common scaffold of core genes but contain different accessory genes. A new uniform nomenclature is suggested for ICEs of the Tn4371 family. Two novel Tn4371-like ICE were discovered and characterised, using the novel PCR method described in two different isolates of Ralstonia pickettii from laboratory purified water.

Complete Sequence of p07-406, a 24,179-base-pair plasmid harboring the blaVIM-7 metallo-beta-lactamase gene in a Pseudomonas aeruginosa isolate from the United States

An outbreak involving a Pseudomonas aeruginosa strain that was resistant to all tested antimicrobials except polymyxin B occurred in a hospital in Houston, TX. Previous studies on this strain showed that it possesses a novel mobile metallo-beta-lactamase (MBL) gene, designated bla(VIM-7), located on a plasmid (p07-406). Here, we report the complete sequence, annotation, and functional characterization of this plasmid. p07-406 is 24,179 bp in length, and 29 open reading frames were identified related to known or putatively recognized proteins. Analysis of this plasmid showed it to be comprised of four distinct regions: (i) a region of 5,200 bp having a Tn501-like mercuric resistance (mer) transposon upstream of the replication region; (ii) a Tn3-like transposon carrying a truncated integron with a bla(VIM-7) gene and an insertion sequence inserted at the other end of this transposon; (iii) a region of four genes, upstream of the Tn3-like transposon, possessing very high similarity to plasmid pXcB from Xanthomonas campestris pv. citri commonly associated with plants; (iv) a backbone sequence similar to the backbone structure of the IncP group plasmid Rms149, pB10, and R751. This is the first plasmid to be sequenced carrying an MBL gene and highlights the amelioration of DNA segments from disparate origins, most noticeably from plant pathogens.

Comparative genomics of the pIPO2/pSB102 family of environmental plasmids: sequence, evolution, and ecology of pTer331 isolated from Collimonas fungivorans Ter331

Plasmid pTer331 from the bacterium Collimonas fungivorans Ter331 is a new member of the pIPO2/pSB102 family of environmental plasmids. The 40 457-bp sequence of pTer331 codes for 44 putative ORFs, most of which represent genes involved in replication, partitioning and transfer of the plasmid. We confirmed that pTer331 is stably maintained in its native host. Deletion analysis identified a mini-replicon capable of replicating autonomously in Escherichia coli and Pseudomonas putida. Furthermore, plasmid pTer331 was able to mobilize and retromobilize IncQ plasmid pSM1890 at typical rates of 10(-4) and 10(-8), respectively. Analysis of the 91% DNA sequence identity between pTer331 and pIPO2 revealed functional conservation of coding sequences, the deletion of DNA fragments flanked by short direct repeats (DR), and sequence preservation of long DRs. In addition, we experimentally established that pTer331 has no obvious contribution in several of the phenotypes that are characteristic of its host C. fungivorans Ter331, including the ability to efficiently colonize plant roots. Based on our findings, we hypothesize that cryptic plasmids such as pTer331 and pIPO2 might not confer an individual advantage to bacteria, but, due to their broad-host-range and ability to retromobilize, benefit bacterial populations by accelerating the intracommunal dissemination of the mobile gene pool.

Genomics of IncP-1 antibiotic resistance plasmids isolated from wastewater treatment plants provides evidence for a widely accessible drug resistance gene pool

The dramatic spread of antibiotic resistance is a crisis in the treatment of infectious diseases that affect humans. Several studies suggest that wastewater treatment plants (WWTP) are reservoirs for diverse mobile antibiotic resistance elements. This review summarizes findings derived from genomic analysis of IncP-1 resistance plasmids isolated from WWTP bacteria. Plasmids that belong to the IncP-1 group are self-transmissible, and transfer to and replicate in a wide range of hosts. Their backbone functions are described with respect to their impact on vegetative replication, stable maintenance and inheritance, mobility and plasmid control. Accessory genetic modules, mainly representing mobile genetic elements, are integrated in-between functional plasmid backbone modules. These elements carry determinants conferring resistance to nearly all clinically relevant antimicrobial drug classes, to heavy metals, and quaternary ammonium compounds used as disinfectants. All plasmids analysed here contain integrons that potentially facilitate integration, exchange and dissemination of resistance gene cassettes. Comparative genomics of accessory modules located on plasmids from WWTP and corresponding modules previously identified in other bacterial genomes revealed that animal, human and plant pathogens and other bacteria isolated from different habitats share a common pool of resistance determinants.

The incC korB region of RK2 repositions a mini-RK2 replicon in Escherichia coli

Analysis by fluorescence microscopy has established that plasmid RK2 in Escherichia coli and other gram-negative bacteria is present as discrete clusters that are located inside the nucleoid at the mid- or quarter-cell positions. A mini-RK2 replicon containing an array of tetO repeats was visualized in E. coli cells that express a TetR-EYFP fusion protein. Unlike intact RK2, the RK2 mini-replicon (pCV1) was localized as a cluster at the cell poles outside of the nucleoid. Insertion of the O(B1)incC korB partitioning (par) region of RK2 into pCV1 resulted in a shift of the mini-replicon to within the nucleoid region at the mid- and quarter-cell positions. Despite the repositioning of the mini-RK2 replicon to the cellular positions where intact RK2 is normally located, the insertion of the intact O(B1) incC korB region did not significantly stabilize the mini-RK2 plasmid during cell growth. Deletions within the O(B1)incC or the korB region resulted in a failure of this par region to move pCV1 out of its polar position. The insertion of the par system of plasmid F into pCV1 resulted in a similar shift in the location of pCV1 to the nucleoid region. Unlike O(B1)incC korB, the insertion of the RK2 parABC resolvase system into pCV1 did not affect the polar positioning of pCV1. This effect of O(B1)incC korB on the location of pCV1 provides additional evidence for a partitioning role of this region of plasmid RK2. However, the failure of this region to significantly increase the stability of the mini-RK2 plasmid indicates that the localization of the plasmid to the mid- and quarter cell positions in E. coli is not in itself sufficient for the stable maintenance of plasmid RK2.

Site-specific recombination systems for the genetic manipulation of eukaryotic genomes

Site-specific recombination systems, such as the bacteriophage Cre-lox and yeast FLP-FRT systems, have become valuable tools for the rearrangement of DNA in higher eukaryotes. As a first step to expanding the repertoire of recombination tools, we screened recombination systems derived from the resolvase/invertase family for site-specific recombinase activity in the fission yeast Schizosaccharomyces pombe. Here, we report that seven recombination systems, four from the small serine resolvase subfamily (CinH, ParA, Tn1721, and Tn5053) and three from the large serine resolvase subfamily (Bxb1, TP901-1, and U153), can catalyze site-specific deletion in S. pombe. Those from the large serine resolvase subfamily were also capable of site-specific integration and inversion. In all cases, the recombination events were precise. Functional operation of these recombination systems in the fission yeast holds promise that they may be further developed as recombination tools for the site-specific rearrangement of plant and animal genomes.

Prokaryotic toxin–antitoxin stress response loci

Although toxin-antitoxin gene cassettes were first found in plasmids, recent database mining has shown that these loci are abundant in free-living prokaryotes, including many pathogenic bacteria. For example, Mycobacterium tuberculosis has 38 chromosomal toxin-antitoxin loci, including 3 relBE and 9 mazEF loci. RelE and MazF are toxins that cleave mRNA in response to nutritional stress. RelE cleaves mRNAs that are positioned at the ribosomal A-site, between the second and third nucleotides of the A-site codon. It has been proposed that toxin-antitoxin loci function in bacterial programmed cell death, but evidence now indicates that these loci provide a control mechanism that helps free-living prokaryotes cope with nutritional stress.

A site-specific recombinase (RinQ) is required to exert incompatibility towards the symbiotic plasmid of Rhizobium etli

The replication/partition region of the symbiotic plasmid p42d of Rhizobium etli CE3 is characterized by the presence of the repABC operon. A recombinant plasmid containing this region is able to replicate in a R. etli derivative cured from p42d, with the same stability and copy number shown by the parental plasmid. However, when this construct is introduced into the wild-type strain, instead of exerting incompatibility against the p42d, it forms a stable cointegrate with it. In this paper, we show that a site-specific resolvase, and its action sites are essential factors to displace the symbiotic p42d. We propose a model for this novel incompatibility mechanism.

Host-specific incompatibility by 9-bp direct repeats indicates a role in the maintenance of broad-host-range plasmid RK2

Broad-host-range incompatibility group P (IncP) plasmids RK2 and R751 have 9-bp direct repeats (DR) of unknown function located between their kilC and kilE loci. The nucleotide sequences of the 9-bp repeats are different for RK2 (an IncPalpha group plasmid) and R751 (IncPbeta group), but both DR regions are organized similarly, including an 11-bp spacer with identical 5'-CGCCA-3' cores and an adjacent binding site for KorB, a known partition protein and transcriptional repressor. The occurrence of similarly arranged DR elements with different repeat sequences is suggestive of an important plasmid-specific function for the DR regions. Here we show that the cloned RK2 DR region in trans to RK2 exhibits a host-specific incompatibility phenotype, in which RK2 is destabilized in Pseudomonas aeruginosa but not in Escherichia coli. Incompatibility was not dependent on the adjacent KorB-binding site. Deletion of the kilE locus, which is required for stable maintenance in P. aeruginosa, did not abolish DR-mediated incompatibility. Precise deletion of DR from RK2 had no effect on maintenance but eliminated sensitivity to DR in trans, showing that incompatibility requires DR to be present on both plasmids. These results raise the possibility that the DR region may be involved in a plasmid maintenance system for P. aeruginosa that is independent of the known stability functions on RK2.

ParE toxin encoded by the broad-host-range plasmid RK2 is an inhibitor of Escherichia coli gyrase

Broad-host-range plasmid RK2 encodes a post-segregational killing system, parDE, which contributes to the stable maintenance of this plasmid in Escherichia coli and many distantly related bacteria. The ParE protein is a toxin that inhibits cell growth, causes cell filamentation and eventually cell death. The ParD protein is a specific ParE antitoxin. In this work, the in vitro activities of these two proteins were examined. The ParE protein was found to inhibit DNA synthesis using an E. coli oriC supercoiled template and a replication-proficient E. coli extract. Moreover, ParE inhibited the early stages of both chromosomal and plasmid DNA replication, as measured by the DnaB helicase- and gyrase-dependent formation of FI*, a highly unwound form of supercoiled DNA. The presence of ParD prevented these inhibitory activities of ParE. We also observed that the addition of ParE to supercoiled DNA plus gyrase alone resulted in the formation of a cleavable gyrase-DNA complex that was converted to a linear DNA form upon addition of sodium dodecyl sulphate (SDS). Adding ParD before or after the addition of ParE prevented the formation of this cleavable complex. These results demonstrate that the target of ParE toxin activity in vitro is E. coli gyrase.

The active partition gene incC of IncP plasmids is required for stable maintenance in a broad range of hosts

Plasmids of incompatibility group P (IncP) are capable of replication and stable inheritance in a wide variety of gram-negative bacteria. Three determinants of IncP plasmids are components of an active partition locus that is predicted to function in the segregation of plasmid copies to daughter cells. These determinants are incC, which codes for a member of the ParA family of partition ATPases; korB, which specifies a DNA-binding protein that also functions as a global transcriptional repressor; and O(B), the DNA target for KorB, which occurs at multiple locations on IncP plasmids. To determine the importance and host range of the IncC/KorB partition system in the maintenance of IncP plasmids, we constructed an in-frame deletion of incC in the otherwise intact 60-kb IncP alpha plasmid R995. R995 Delta incC was found to be highly unstable in Escherichia coli, Pseudomonas aeruginosa, Pseudomonas putida, Agrobacterium tumefaciens, and Acinetobacter calcoaceticus, whereas wild-type R995 is stable in all these hosts. In addition, R995 Delta incC could not be established in Actinobacillus actinomycetemcomitans. trans-Complementation analysis showed that the coding region for IncC2 polypeptide, which is expressed from an internal translational start within the incC gene, was sufficient to restore stable maintenance to wild-type levels. The results show that the IncC/KorB active partition system of IncP plasmids is remarkably proficient for stable maintenance in diverse bacteria.

Multicopy plasmids are clustered and localized in Escherichia coli

We localized the multicopy plasmid RK2 in Escherichia coli and found that the number of fluorescent foci observed in each cell was substantially less than the copy number of the plasmid, suggesting that many copies of RK2 are grouped into a few multiplasmid clusters. In minimal glucose media, the majority of cells had one or two foci, with a single focus localized near midcell, and two foci near the 1/4 and 3/4 cell positions. The number of foci per cell increased with cell length and with growth rate, and decreased upon entering stationary phase, suggesting a coordination of RK2 replication or segregation with the bacterial cell cycle. Time-lapse microscopy demonstrated that partitioning of RK2 foci is achieved by the splitting of a single focus into two or three smaller foci, which are capable of separating with rapid kinetics. A derivative of the high-copy-number plasmid pUC19 containing the lacO array was also localized by tagging with GFP-LacI. Whereas many of the cells contained numerous, randomly diffusing foci, most cells exhibited one or two plasmid clusters located at midcell or the cell quarter positions. Our results suggest a model in which multicopy plasmids are not always randomly diffusing throughout the cell as previously thought, but can be replicated and partitioned in clusters targeted to specific locations.

Incompatibility protein IncC and global regulator KorB interact in active partition of promiscuous plasmid RK2

Replication of the broad-host-range, IncPalpha plasmid RK2 requires two plasmid loci: trfA, the replication initiator gene, and oriV, the origin of replication. While these determinants are sufficient for replication in a wide variety of bacteria, they do not confer the stable maintenance of parental RK2 observed in its hosts. The product of the incC gene has been proposed to function in the stable maintenance of RK2 because of its relatedness to the ParA family of ATPases, some of which are known to be involved in the active partition of plasmid and chromosomal DNA. Here we show that IncC has the properties expected of a component of an active partition system. The smaller polypeptide product of incC (IncC2) exhibits a strong, replicon-independent incompatibility phenotype with RK2. This incompatibility phenotype requires the global transcriptional repressor, KorB, and the target for incC-mediated incompatibility is a KorB-binding site (O(B)). We found that KorB and IncC interact in vivo by using the yeast two-hybrid system and in vitro by using partially purified proteins. Elevated expression of the incC and korB genes individually has no obvious effect on Escherichia coli cell growth, but their simultaneous overexpression is toxic, indicating a possible interaction of IncC-KorB complexes with a vital host target. A region of RK2 bearing incC, korB, and multiple KorB-binding sites is able to stabilize an unstable, heterologous plasmid in an incC-dependent manner. Finally, elevated levels of IncC2 cause RK2 to aggregate, indicating a possible role for IncC in plasmid pairing. These findings demonstrate that IncC, KorB, and at least one KorB-binding site are components of an active partition system for the promiscuous plasmid RK2.

The replication and stable-inheritance functions of IncP-9 plasmid pM3

Little is known of the transfer and maintenance machinery of the IncP-9 plasmids, which are found in Pseudomonas spp. and include both degradative and resistance plasmids. One such plasmid, pM3, which confers resistance to streptomycin and tetracycline, was found repeatedly in Pseudomonas species from numerous locations in Belarus. pM3 has a broad host range, but is unable to replicate in enterobacteria at 37 degrees C and above. A mini derivative, pMT2, was constructed by partial PstI digestion and ligation with a fragment encoding Km(R). The complete sequence of pMT2 was determined. Analysis of its 8526 bp of pM3 DNA revealed several ORFs whose predicted polypeptide products were found to have similarity to previously analysed proteins involved in plasmid replication (rep gene), transfer (mpf; mating-pair formation gene) and stable maintenance (par, mrs genes). The organization of these genes showed similarity to several plasmid systems including the Ti and pSYM plasmids as well as IncP-1 plasmids. Subcloning narrowed down the region required for replication, and identified the putative rep gene and putative par promoter region as able to express incompatibility. rep deletion mutants were lost from the cell line, and expression of the rep gene was shown to be controlled by negative autoregulation. A pMT2 derivative with an insertion between the rep and par genes showed very weak, if any, ability to replicate autonomously, suggesting that plasmid maintenance may depend on a close interaction of rep and par functions.

Relationship between the Tsh autotransporter and pathogenicity of avian Escherichia coli and localization and analysis of the Tsh genetic region

The temperature-sensitive hemagglutinin Tsh is a member of the autotransporter group of proteins and was first identified in avian-pathogenic Escherichia coli (APEC) strain chi7122. The prevalence of tsh was investigated in 300 E. coli isolates of avian origin and characterized for virulence in a 1-day-old chick lethality test. Results indicate that among the tsh-positive APEC isolates, 90.6% belonged to the highest virulence class. Experimental inoculation of chickens with chi7122 and an isogenic tsh mutant demonstrated that Tsh may contribute to the development of lesions within the air sacs of birds but is not required for subsequent generalized infection manifesting as perihepatitis, pericarditis, and septicemia. Conjugation and hybridization experiments revealed that the tsh gene is located on a ColV-type plasmid in many of the APEC strains studied, including strain chi7122, near the colicin V genes in most of these strains. DNA sequences flanking the tsh gene of strain chi7122 include complete and partial insertion sequences and phage-related DNA sequences, some of which were also found on virulence plasmids and pathogenicity islands present in various E. coli pathotypes and other pathogenic members of the Enterobacteriaceae. These results demonstrate that the tsh gene is frequently located on the ColV virulence plasmid in APEC and suggest a possible role of Tsh in the pathogenicity of E. coli for chickens in the early stages of infection.

The complete DNA sequence and analysis of R27, a large IncHI plasmid from Salmonella typhi that is temperature sensitive for transfer

Salmonella typhi, the causative agent of typhoid fever, annually infects 16 million people and kills 600 000 world wide. Plasmid-encoded multiple drug resistance in S. typhi is always encoded by plasmids of incompatibility group H (IncH). The complete DNA sequence of the large temperature-sensitive conjugative plasmid R27, the prototype for the IncHI1 family of plasmids, has been compiled and analyzed. This 180 kb plasmid contains 210 open reading frames (ORFs), of which 14 have been previously identified and 56 exhibit similarity to other plasmid and prokaryotic ORFs. A number of insertion elements were found, including the full Tn 10 transposon, which carries tetracycline resistance genes. Two transfer regions, Tra1 and Tra2, are present, which are separated by a minimum of 64 kb. Homologs of the DNA-binding proteins TlpA and H-NS that act as temperature-regulated repressors in other systems have been located in R27. Sequence analysis of transfer and replication regions supports a mosaic-like structure for R27. The genes responsible for conjugation and plasmid maintenance have been identified and mechanisms responsible for thermosensitive transfer are discussed.

Molecular cloning of a cDNA encoding a novel Ca(2+)-dependent nuclease of Arabidopsis that is similar to staphylococcal nuclease

We have isolated a cDNA from Arabidopsis thaliana for a protein consisting of 323 amino acids with similarity to an extracellular nuclease from Staphylococcus. Nuclease assay using toluidine blue-DNA plates has demonstrated that the gene product has nuclease activity dependent on Ca(2+) and inhibited by Zn(2+), designated CAN (Ca(2+)-dependent nuclease). Differing from the staphylococcal nuclease, CAN has neither a signal peptide nor any long hydrophobic regions, suggesting that it is not a secreted protein.

Addiction modules and programmed cell death and antideath in bacterial cultures

In bacteria, programmed cell death is mediated through "addiction modules" consisting of two genes. The product of the second gene is a stable toxin, whereas the product of the first is a labile antitoxin. Here we extensively review what is known about those modules that are borne by one of a number of Escherichia coli extrachromosomal elements and are responsible for the postsegregational killing effect. We focus on a recently discovered chromosomally borne regulatable addiction module in E. coli that responds to nutritional stress and also on an antideath gene of the E. coli bacteriophage lambda. We consider the relation of these two to programmed cell death and antideath in bacterial cultures. Finally, we discuss the similarities between basic features of programmed cell death and antideath in both prokaryotes and eukaryotes and the possibility that they share a common evolutionary origin.

Plasmid RK2 ParB protein: purification and nuclease properties

The parCBA operon of the 3.2-kb stabilization region of plasmid RK2 encodes three cotranslated proteins. ParA mediates site-specific recombination to resolve plasmid multimers, ParB has been shown to be a nuclease, and the function of ParC is unknown. In this study ParB was overexpressed by cotranslation with ParC in Escherichia coli by using a plasmid construct that contained the parC and parB genes under the control of the T7 promoter. Purification was achieved by treatment of extracts with Polymin P, followed by ammonium sulfate precipitation and heparin and ion-exchange chromatography. Sizing-column analysis indicated that ParB exists as a monomer in solution. Analysis of the enzymatic properties of purified ParB indicated that the protein preferentially cleaves single-stranded DNA. ParB also nicks supercoiled plasmid DNA preferably at sites with potential single-stranded character, like AT-rich regions and sequences that can form cruciform structures. ParB also exhibits 5'-->3' exonuclease activity. This ParB activity on a 5'-end-labeled, double-stranded DNA substrate produces a 3', 5'-phosphorylated dinucleotide which is further cleaved to a 3', 5'-phosphorylated mononucleotide. The role of the ParB endonuclease and exonuclease activities in plasmid RK2 stabilization remains to be determined.

Tn5053 family transposons are res site hunters sensing plasmidal res sites occupied by cognate resolvases

DNA sequence database search revealed that most of Tn5053/Tn402 family transposons inserted into natural plasmids were located in putative res regions upstream of genes encoding various resolvase-like proteins. Some of these resolvase genes belonged to Tn3 family transposons and were closely related to the tnpR genes of Tn1721 and a recently detected Tn5044. Using recombinant plasmids containing fragments of Tn1721 or Tn5044 as targets in transposition experiments, we have demonstrated that Tn5053 displays striking insertional preference for the res regions of these transposons: more than 70% of Tn5053 insertion events occur in clusters inside the target res regions, while most remaining insertion events occur no further than 200 base pairs away from both sides of the res regions. We demonstrate that Tn5053 insertions (both into and outside a res region of the target plasmid) require the presence of a functional cognate resolvase gene either in cis or in trans. To our knowledge, this is the first case when a site-specific recombination system outside a transposon has been shown to be involved in transposition.

Role of the parCBA operon of the broad-host-range plasmid RK2 in stable plasmid maintenance

The par region of the stably maintained broad-host-range plasmid RK2 is organized as two divergent operons, parCBA and parDE, and a cis-acting site. parDE encodes a postsegregational killing system, and parCBA encodes a resolvase (ParA), a nuclease (ParB), and a protein of unknown function (ParC). The present study was undertaken to further delineate the role of the parCBA region in the stable maintenance of RK2 by first introducing precise deletions in the three genes and then assessing the abilities of the different constructs to stabilize RK2 in three strains of Escherichia coli and two strains of Pseudomonas aeruginosa. The intact parCBA operon was effective in stabilizing a conjugation-defective RK2 derivative in E. coli MC1061K and RR1 but was relatively ineffective in E. coli MV10Deltalac. In the two strains in which the parCBA operon was effective, deletions in parB, parC, or both parB and parC caused an approximately twofold reduction in the stabilizing ability of the operon, while a deletion in the parA gene resulted in a much greater loss of parCBA activity. For P. aeruginosa PAO1161Rifr, the parCBA operon provided little if any plasmid stability, but for P. aeruginosa PAC452Rifr, the RK2 plasmid was stabilized to a substantial extent by parCBA. With this latter strain, parA and res alone were sufficient for stabilization. The cer resolvase system of plasmid ColE1 and the loxP/Cre system of plasmid P1 were tested in comparison with the parCBA operon. We found that, not unlike what was previously observed with MC1061K, cer failed to stabilize the RK2 plasmid with par deletions in strain MV10Deltalac, but this multimer resolution system was effective in stabilizing the plasmid in strain RR1. The loxP/Cre system, on the other hand, was very effective in stabilizing the plasmid in all three E. coli strains. These observations indicate that the parA gene, along with its res site, exhibits a significant level of plasmid stabilization in the absence of the parC and parB genes but that in at least one E. coli strain, all three genes are required for maximum stabilization. It cannot be determined from these results whether or not the stabilization effects seen with parCBA or the cer and loxP/Cre systems are strictly due to a reduction in the level of RK2 dimers and an increase in the number of plasmid monomer units or if these systems play a role in a more complex process of plasmid stabilization that requires as an essential step the resolution of plasmid dimers.

Complete sequence of the IncPbeta plasmid R751: implications for evolution and organisation of the IncP backbone

The broad host range IncP plasmids are of particular interest because of their ability to promote gene spread between diverse bacterial species. To facilitate study of these plasmids we have compiled the complete sequence of the IncPbeta plasmid R751. Comparison with the sequence of the IncPalpha plasmids confirms the conservation of the IncP backbone of replication, conjugative transfer and stable inheritance functions between the two branches of this family. As in the IncPalpha genome the DNA of this backbone appears to have been enriched for the GCCG/CGGC motifs characteristic of the genome of organisms with a high G+C content, such as P. aeruginosa, suggesting that IncPbeta plasmids have been subjected during their evolution to similar mutational and selective forces as IncPalpha plasmids and may have evolved in pseudomonad hosts. The IncP genome is consistently interrupted by insertion of phenotypic markers and/or transposable elements between oriV and trfA and between the tra and trb operons. The R751 genome reveals a family of repeated sequences in these regions which may form the basis of a hot spot for insertion of foreign DNA. Sequence analysis of the cryptic transposon Tn4321 revealed that it is not a member of the Tn21 family as we had proposed previously from an inspection of its ends. Rather it is a composite transposon defined by inverted repeats of a 1347 bp IS element belonging to a recently discovered family which is distributed throughout the prokaryotes. The central unique region of Tn4321 encodes two predicted proteins, one of which is a regulatory protein while the other is presumably responsible for an as yet unidentified phenotype. The most striking feature of the IncPalpha plasmids, the global regulation of replication and transfer by the KorA and KorB proteins encoded in the central control operon, is conserved between the two plasmids although there appear to be significant differences in the specificity of repressor-operator interactions. The importance of these global regulatory circuits is emphasised by the observation that the operator sequences for KorB are highly conserved even in contexts where the surrounding region, either a protein coding or intergenic sequence, has diverged considerably. There appears to be no equivalent of the parABCDE region which in the IncPalpha plasmids provides multimer resolution, lethality to plasmid-free segregants and active partitioning functions. However, we found that the continuous sector from co-ordinate 0 to 9100 bp, encoding the co-regulated klc and kle operons as well as the central control region, could confer a high degree of segregational stability on a low copy number test vector. Thus R751 appears to exhibit very clearly what was first revealed by study of the IncPalpha plasmids, namely a fully functional co-ordinately regulated set of replication, transfer and stable inheritance functions.

Engineering of quasi-natural Pseudomonas putida strains for toluene metabolism through an ortho-cleavage degradation pathway

To construct a bacterial catalyst for bioconversion of toluene and several alkyl and chloro- and nitro-substituted derivatives into the corresponding benzoates, the upper TOL operon of plasmid pWW0 of Pseudomonas putida was fully reassembled as a single gene cassette along with its cognate regulatory gene, xylR. The corresponding DNA segment was then targeted to the chromosome of a P. putida strain by using a genetic technique that allows deletion of all recombinant tags inherited from previous cloning steps and leaves the otherwise natural strain bearing exclusively the DNA segment encoding the phenotype of interest. The resulting strains grew on toluene as the only carbon source through a two-step process: conversion of toluene into benzoate, mediated by the upper TOL enzymes, and further metabolism of benzoate through the housekeeping ortho-ring cleavage pathway of the catechol intermediate.

The ParB protein encoded by the RP4 par region is a Ca(2+)-dependent nuclease linearizing circular DNA substrates

The parCBA operon, which together with the parDE operon constitutes an efficient stabilization system of the broad-host-range plasmid RP4, encodes a 20 kDa polypeptide (ParB), which exhibits sequence homology to nucleases. The ParB protein was overexpressed by means of an inducible tac-promoter system. Plate assays with herring sperm DNA as substrate provided evidence for nuclease activity. The ParB nuclease shows specificity for circular DNA substrates and linearizes them regardless of the presence in cis of parts of the RP4 partitioning region. The nuclease activity in vitro is stimulated by the presence of Ca2+ ions. EDTA (5 mM) completely inhibits nuclease activity. By restriction analysis of the ParB-linearized products, cleavage of circular DNA substrates taking place preferentially at specific sites was demonstrated. Run-off sequencing and primer extension analysis of ParB-linearized plasmid DNA revealed a specific target for ParB action adjacent to an AT-rich region containing palindromic sequence elements on a pBR322-derived plasmid.

Contribution of different segments of the par region to stable maintenance of the broad-host-range plasmid RK2

A 3.2-kb region of the broad-host-range plasmid RK2 has been shown to encode a highly efficient plasmid maintenance system that functions in a vector-independent manner. This region, designated par, consists of two divergently arranged operons: parCBA and parDE. The 0.7-kb parDE operon promotes plasmid stability by a postsegregational killing mechanism that ensures that plasmid-free daughter cells do not survive after cell division. The 2.3-kb parCBA operon encodes a site-specific resolvase protein (ParA) and its multimer resolution site (res) and two proteins (ParB and ParC) whose functions are as yet unknown. It has been proposed that the parCBA operon encodes a plasmid partitioning system (M. Gerlitz, O. Hrabak, and H. Schwabb, J. Bacteriol. 172:6194-6203, 1990; R. C. Roberts, R. Burioni, and D. R. Helinski, J. Bacteriol. 172:6204-6216, 1990). To further define the role of this region in promoting the stable maintenance of plasmid RK2, the parCBA and parDE operons separately and the intact (parCBA/DE) par region (3.2 kb) were reintroduced into an RK2 plasmid deleted for par and assayed for plasmid stability in two Escherichia coli strains (MC1061K and MV10delta lac). The intact 3.2-kb region provided the highest degree of stability in the two strains tested. The ability of the parCBA or parDE region alone to promote stable maintenance in the E. coli strains was dependent on the particular strain and the growth temperature. Furthermore, the insertion of the ColE1 cer site into the RK2 plasmid deleted for the par region failed to stabilize the plasmid in the MC1061K strain, indicating that the multimer resolution activity encoded by parCBA is not by itself responsible for the stabilization activity observed for this operon. To examine the relative contributions of postsegregational cell killing and a possible partitioning function encoded by the intact 3.2-kb par region, stability assays were carried out with ParD provided in trans by a compatible (R6K) minireplicon to prevent postsegregational killing. In E. coli MV10delta lac, postsegregational killing appeared to be the predominant mechanism for stabilization since the presence of ParD substantially reduced the stability of plasmids carrying either the 3.2- or 0.7-kb region. However, in the case of E. coli MC1061K, the presence of ParD in trans did not result in a significant loss of stabilization by the 3.2-kb region, indicating that the putative partitioning function was largely responsible for RK2 maintenance. To examine the basis for the apparent differences in postsegregational killing between the two E. coli strains, transformation assays were carried out to determine the relative sensitivities of the strains to the ParE toxin protein. Consistent with the relatively small contribution of the postsegregational killing to plasmid stabilization in MC1061K, we found that this strain was substantially more resistant to killing by ParE in comparison to E. coli MV10delta lac. A transfer-deficient mutant of thepar-deleted plasmid was constructed for the stable maintenance studies. This plasmid was found to be lost from E. coli MV10delta lac at a rate three times greater than the rate for the transfer-proficient plasmid, suggesting that conjugation can also play a significant role in the maintenance of plasmid RK2.

Avirulence gene D of Pseudomonas syringae pv. tomato may have undergone horizontal gene transfer

Avirulence gene D (avrD) is carried on the B-plasmid of the plant pathogen Pseudomonas syringae pv. tomato with plasmid-borne avrD homologs widely distributed among the Pseudomonads. We now report sequences in the soft rot pathogen Erwinia carotovora that cross-hybridize to avrD suggesting a conserved function beyond avirulence. Alternatively, avrD may have been transferred horizontally among species: (i) DNA linked to avrD shows evidence of class II transpositions and contains a novel IS3-related insertion sequence, and (ii) short sequences linked to avrD are similar to pathogenicity genes from a variety of unrelated pathogens. We have also identified the gene cluster that controls B-plasmid stability.

The traE gene of plasmid RP4 encodes a homologue of Escherichia coli DNA topoisomerase III

The polypeptide encoded by the plasmid RP4 traE gene shows extensive protein sequence similarity to Escherichia coli topB, the gene encoding DNA topoisomerase III (Topo III). The traE gene product has been cloned into a bacteriophage T7-based transient expression system, and the polypeptide has been expressed and purified. The TraE protein exhibits topoisomerase activity similar to that of Topo III. Relaxation is stimulated by high temperature and low concentrations of Mg2+. In addition, similar to E. coli Topo III, the TraE protein is a potent decatenase and can substitute for Topo III activity in vivo. The biochemical properties of the TraE protein in vitro suggest that the protein may be involved in the resolution of plasmid DNA replication intermediates either during vegetative replication or in conjugative DNA transfer. Putative homologues of Topo III have been found to be encoded by other broad host range, conjugative plasmids isolated from both Gram-negative and Gram-positive organisms, suggesting that Topo III-like polypeptides may have an essential role in the propagation of many promiscuous plasmids.

The kilE locus of promiscuous IncP alpha plasmid RK2 is required for stable maintenance in Pseudomonas aeruginosa

Eight coordinately regulated operons constitute the kor regulon of the IncP alpha plasmid RK2. Three operons specify functions required for replication initiation, conjugative transfer, and control of gene expression. The functions of the other operons, including those of the four coregulated operons that compose the kilA, kilC, and kilE loci, have not been determined. Here, we present the first evidence that a kil determinant is involved in IncP plasmid maintenance. Elevation of KorC levels specifically to reduce the expression of the KorC-regulated kilC and kilE operons severely affected the maintenance of both the IncP alpha plasmid RK2lac and the IncP beta plasmid R751 in Pseudomonas aeruginosa but had little effect on plasmid maintenance in Escherichia coli. Precise deletion of the two kilE operons from RK2lac was achieved with the VEX mutagenesis system for large genomes. The resulting plasmid showed significant loss of stability in P. aeruginosa only. The defect could be complemented by reintroduction of kilE at a different position on the plasmid. The instability of the RK2lac delta kilE mutant did not result from a reduction in average plasmid copy number, reduced expression of kilC, decreased conjugative transfer, or loss of the korE regulator. We found that both the par and kilE loci are required for full stability of RK2lac in P. aeruginosa and that the par and kilE functions act independently. These results demonstrate a critical role for the kilE locus in the stable inheritance of RK2 in P. aeruginosa.