Identification, isolation, and overexpression of the gene encoding the psi subunit of DNA polymerase III holoenzyme

The E. coli DNA Replication Fork

DNA replication in Escherichia coli initiates at oriC, the origin of replication and proceeds bidirectionally, resulting in two replication forks that travel in opposite directions from the origin. Here, we focus on events at the replication fork. The replication machinery (or replisome), first assembled on both forks at oriC, contains the DnaB helicase for strand separation, and the DNA polymerase III holoenzyme (Pol III HE) for DNA synthesis. DnaB interacts transiently with the DnaG primase for RNA priming on both strands. The Pol III HE is made up of three subassemblies: (i) the αɛθ core polymerase complex that is present in two (or three) copies to simultaneously copy both DNA strands, (ii) the β2 sliding clamp that interacts with the core polymerase to ensure its processivity, and (iii) the seven-subunit clamp loader complex that loads β2 onto primer-template junctions and interacts with the α polymerase subunit of the core and the DnaB helicase to organize the two (or three) core polymerases. Here, we review the structures of the enzymatic components of replisomes, and the protein-protein and protein-DNA interactions that ensure they remain intact while undergoing substantial dynamic changes as they function to copy both the leading and lagging strands simultaneously during coordinated replication.

Parallel multiplicative target screening against divergent bacterial replicases: identification of specific inhibitors with broad spectrum potential

Typically, biochemical screens that employ pure macromolecular components focus on single targets or a small number of interacting components. Researches rely on whole cell screens for more complex systems. Bacterial DNA replicases contain multiple subunits that change interactions with each stage of a complex reaction. Thus, the actual number of targets is a multiple of the proteins involved. It is estimated that the overall replication reaction includes up to 100 essential targets, many suitable for discovery of antibacterial inhibitors. We have developed an assay, using purified protein components, in which inhibitors of any of the essential targets can be detected through a common readout. Use of purified components allows each protein to be set within the linear range where the readout is proportional to the extent of inhibition of the target. By performing assays against replicases from model Gram-negative and Gram-positive bacteria in parallel, we show that it is possible to distinguish compounds that inhibit only a single bacterial replicase from those that exhibit broad spectrum potential.

Large gene overlaps in prokaryotic genomes: result of functional constraints or mispredictions?

Background

Across the fully sequenced microbial genomes there are thousands of examples of overlapping genes. Many of these are only a few nucleotides long and are thought to function by permitting the coordinated regulation of gene expression. However, there should also be selective pressure against long overlaps, as the existence of overlapping reading frames increases the risk of deleterious mutations. Here we examine the longest overlaps and assess whether they are the product of special functional constraints or of erroneous annotation.

Results

We analysed the genes that overlap by 60 bps or more among 338 fully-sequenced prokaryotic genomes. The likely functional significance of an overlap was determined by comparing each of the genes to its respective orthologs. If a gene showed a significantly different length from its orthologs it was considered unlikely to be functional and therefore the result of an error either in sequencing or gene prediction. Focusing on 715 co-directional overlaps longer than 60 bps, we classified the erroneous ones into five categories: i) 5'-end extension of the downstream gene due to either a mispredicted start codon or a frameshift at 5'-end of the gene (409 overlaps), ii) fragmentation of a gene caused by a frameshift (163), iii) 3'-end extension of the upstream gene due to either a frameshift at 3'-end of a gene or point mutation at the stop codon (68), iv) Redundant gene predictions (4), v) 5' & 3'-end extension which is a combination of i) and iii) (71). We also studied 75 divergent overlaps that could be classified as misannotations of group i). Nevertheless we found some convergent long overlaps (54) that might be true overlaps, although an important part of convergent overlaps could be classified as group iii) (124).

Conclusion

Among the 968 overlaps larger than 60 bps which we analysed, we did not find a single real one among the co-directional and divergent orientations and concluded that there had been an excessive number of misannotations. Only convergent orientation seems to permit some long overlaps, although convergent overlaps are also hampered by misannotations. We propose a simple rule to flag these erroneous gene length predictions to facilitate automatic annotation.

DNA polymerase III holoenzyme from Thermus thermophilus identification, expression, purification of components, and use to reconstitute a processive replicase

DNA replication in bacteria is performed by a specialized multicomponent replicase, the DNA polymerase III holoenzyme, that consist of three essential components: a polymerase, the beta sliding clamp processivity factor, and the DnaX complex clamp-loader. We report here the assembly of the minimal functional holoenzyme from Thermus thermophilus (Tth), an extreme thermophile. The minimal holoenzyme consists of alpha (pol III catalytic subunit), beta (sliding clamp processivity factor), and the essential DnaX (tau/gamma), delta and delta' components of the DnaX complex. We show with purified recombinant proteins that these five components are required for rapid and processive DNA synthesis on long single-stranded DNA templates. Subunit interactions known to occur in DNA polymerase III holoenzyme from mesophilic bacteria including delta-delta' interaction, deltadelta'-tau/gamma complex formation, and alpha-tau interaction, also occur within the Tth enzyme. As in mesophilic holoenzymes, in the presence of a primed DNA template, these subunits assemble into a stable initiation complex in an ATP-dependent manner. However, in contrast to replicative polymerases from mesophilic bacteria, Tth holoenzyme is efficient only at temperatures above 50 degrees C, both with regard to initiation complex formation and processive DNA synthesis. The minimal Tth DNA polymerase III holoenzyme displays an elongation rate of 350 bp/s at 72 degrees C and a processivity of greater than 8.6 kilobases, the length of the template that is fully replicated after a single association event.

A comprehensive characterization of the T-cell antigen receptor complex composition by microcapillary liquid chromatography-tandem mass spectrometry

It has become apparent that many intracellular signaling processes involve the dynamic reorganization of cellular proteins into complex signaling assemblies that have a specific subunit composition, function, and subcellular location. Since the elements of such assemblies interact physically, multiprotein signaling complexes can be isolated and analyzed. Recent technical advances in highly sensitive protein identification by electrospray-tandem mass spectrometry have dramatically increased the sensitivity with which such analyses can be performed. The T-cell antigen receptor (TCR) is an oligomeric transmembrane protein complex that is essential to T-cell recognition and function. The extracellular protein domains are responsible for ligand binding while intracellular domains generate and transduce signals in response to specific receptor-ligand interactions. We used microbore capillary chromatography-tandem mass spectrometry to investigate the composition of the TCR protein complex isolated from resting and activated cells of the murine T-cell line CD11.3. We identified all the previously known subunits of the TCR/CD3 complex as well as proteins previously not known to associate with the TCR. The catalytic activities of some of these proteins could potentially be used to interfere pharmacologically with TCR signaling.

Linkage map of Escherichia coli K-12, edition 10: the traditional map

This map is an update of the edition 9 map by Berlyn et al. (M. K. B. Berlyn, K. B. Low, and K. E. Rudd, p. 1715-1902, in F. C. Neidhardt et al., ed., Escherichia coli and Salmonella: cellular and molecular biology, 2nd ed., vol. 2, 1996). It uses coordinates established by the completed sequence, expressed as 100 minutes for the entire circular map, and adds new genes discovered and established since 1996 and eliminates those shown to correspond to other known genes. The latter are included as synonyms. An alphabetical list of genes showing map location, synonyms, the protein or RNA product of the gene, phenotypes of mutants, and reference citations is provided. In addition to genes known to correspond to gene sequences, other genes, often older, that are described by phenotype and older mapping techniques and that have not been correlated with sequences are included.

In vivo assembly of the tau-complex of the DNA polymerase III holoenzyme expressed from a five-gene artificial operon. Cleavage of the tau-complex to form a mixed gamma-tau-complex by the OmpT protease

A plasmid was constructed that encodes all five subunits of the Escherichia coli tau-complex on a single artificially constructed operon under the control of an inducible promoter. The proteins tau, delta, delta , chi, and psi overproduced from this artificial operon assemble efficiently in vivo, providing an efficient source of homogeneous tau-complex. The gamma subunit is a truncated form of tau that is produced by a translational frameshift. When protein expression was induced in bacterial strains containing the outer membrane protein T (OmpT) protease, tau was proteolyzed after lysis to a gamma-like protein, gammaP, and a peptide, C-tau, corresponding to the C terminus of tau. N-terminal sequencing of C-tau revealed a cleavage site between two lysines at positions 429 and 430 of tau. The deduced sequence of gammaP is, therefore, only two amino acids shorter than natural gamma. The proteolysis by OmpT was also shown directly by using purified OmpT and tau-complex in an in vitro reaction. A gammaP-complex and a mixed tau-gammaP-complex were purified from ompT+ cells. When the tau-complex proteins were overexpressed in ompT- bacteria, intact tau-complex lacking gammaP could be purified.

Assembly of a chromosomal replication machine: two DNA polymerases, a clamp loader, and sliding clamps in one holoenzyme particle. I. Organization of the clamp loader

The gamma complex of DNA polymerase III holoenzyme, the replicase of Escherichia coli, couples ATP hydrolysis to the loading of beta sliding clamps onto primed DNA. The beta sliding clamp tethers the holoenzyme replicase to DNA for rapid and processive synthesis. In this report, the gamma complex has been constituted from its five different subunits. Size measurements and subunit stoichiometry studies show a composition of gamma 2 delta 1 delta' 1 1 chi 1 psi 1. Strong intersubunit contacts have been identified by gel filtration, and weaker contacts were identified by surface plasmon resonance measurements. An analogous tau complex has also been constituted and characterized; it is nearly as active as the gamma complex in clamp loading activity, but as shown in the fourth report of this series, it is at a disadvantage in binding the delta, delta', chi, and psi subunits when core is present (Xiao, H., Naktinis, V., and O'Donnell, M. (1995) J. Biol. Chem. 270, 13378-13383). The single copy subunits within the gamma complex provide the basis for the structural asymmetry inherent within DNA polymerase III holoenzyme.

Assembly of a chromosomal replication machine: two DNA polymerases, a clamp loader, and sliding clamps in one holoenzyme particle. III. Interface between two polymerases and the clamp loader

The nine-subunit DNA polymerase (Pol) III* coupled to its beta sliding clamp is a rapid and highly processive replicating machine. The multiple subunits are needed for the complicated task of duplicating the Escherichia coli chromosome. In this report, Pol III* was constituted from individual pure proteins, and its structure was studied. Constitution of the Pol III* particle requires an ordered addition of the subunits, and the final structure contains 14 polypeptides in the ratio alpha 2 epsilon 2 theta 2 tau 2 gamma 2 delta 1 delta' 1 chi 1 psi 1. The structure can be summarized as being composed of two core polymerases (alpha epsilon theta) held together by a dimer of tau and one gamma complex clamp loader (gamma 2 delta 1 delta' 1 chi 1 psi 1) for loading beta onto DNA. At the center of the structure, the related tau and gamma subunits form a heterotetramer upon which the two core polymerases and clamp loader proteins assemble. The single copy nature of the delta, delta', chi, and psi subunits confers a structural asymmetry with respect to the two polymerases, presumably for the different functions of replicating the leading and lagging strands.

DNA and RNA-DNA annealing activity associated with the tau subunit of the Escherichia coli DNA polymerase III holoenzyme

The DNA polymerase III (pol III)holoenzyme is the 10 subunit replicase of Escherichia coli. The 71 kDa tau subunit, encoded by dnaX, dimerizes the core polymerase (alpha epsilon theta) to form pol III'[(alpha epsilon theta)2 tau 2]. tau is also a single-stranded DNA-dependent ATPase and can substitute for the gamma subunit during initiation complex formation. We show here that tau also possesses a DNA-DNA and RNA-DNA annealing activity that is stimulated by Mg2+, but neither requires ATP nor is inhibited by non-hydrolyzable ATP analogs. This suggests the tau may act to stabilize the primer-template interaction during DNA replication.

Localization and characterization of the gene encoding release factor RF3 in Escherichia coli

Two protein release factors (RFs) showing codon specificity, RF1 and RF2, are known to be required for polypeptide chain termination in Escherichia coli. A third protein component has also been described that stimulates termination in vitro, but it has remained uncertain whether this protein, RF3, participates in termination in vivo or is essential to cell growth. We report (i) the purification and N-terminal sequencing of RF3; (ii) the isolation of transposon insertion mutants similar to miaD, a suppressor of a leaky UAA mutation affecting the gene miaA, leading to enhanced nonsense suppression; (iii) the localization of the affected gene on the physical map of the chromosome; and (iv) the cloning and sequencing of the wild-type gene, providing proof that it encodes the factor RF3. We designate the gene prfC. Two transposon insertions were shown to interrupt the coding sequence of prfC, at codons 287 and 426. The enhanced nonsense suppression in the insertion mutants shows that the product participates in termination in vivo. The isolation of such mutants strongly suggests that the gene product is not essential to cell viability, though cell growth is affected. RF3 is a protein with a molecular weight of 59,460 containing 528 amino acids and displays much similarity to elongation factor EF-G, a GTP binding protein necessary for ribosomal translocation, and other GTP binding proteins known or thought to interact with the ribosome.

Identification, molecular cloning and characterization of the gene encoding the chi subunit of DNA polymerase III holoenzyme of Escherichia coli

We have identified a previously reported open reading frame (ORF13) that maps between pepA and valS at 96.6 centisomes of the Escherichia coli genome as the structural gene for the chi subunit of DNA polymerase III holoenzyme. This conclusion is supported by a perfect match of the amino-terminal 24 residues of chi with the DNA sequence of ORF13 and a demonstration that ORF13 directs expression of a protein that co-migrates with authentic chi on SDS-polyacrylamide gels. ORF13, designated holC, was isolated from the E. coli chromosome and inserted into a tac promoter-based expression plasmid to direct production of the chi subunit to 5-7% of the total soluble protein. The 3' end of holC was sequenced to resolve discrepancies between two published versions.