Bacterial adhesion to hydroxyl- and methyl-terminated alkanethiol self-assembled monolayers

Interplay of physico-chemical and mechanical bacteria-surface interactions with transport processes controls early biofilm growth: A review

Biofilms initiate when bacteria encounter and are retained on surfaces. The surface orchestrates biofilm growth through direct physico-chemical and mechanical interactions with different structures on bacterial cells and, in turn, through its influence on cell-cell interactions. Individual cells respond directly to a surface through mechanical or chemical means, initiating "surface sensing" pathways that regulate gene expression, for instance producing extra cellular matrix or altering phenotypes. The surface can also physically direct the evolving colony morphology as cells divide and grow. In either case, the physico-chemistry of the surface influences cells and cell communities through mechanisms that involve additional factors. For instance the numbers of cells arriving on a surface from solution relative to the generation of new cells by division depends on adhesion and transport kinetics, affecting early colony density and composition. Separately, the forces experienced by adhering cells depend on hydrodynamics, gravity, and the relative stiffnesses and viscoelasticity of the cells and substrate materials, affecting mechanosensing pathways. Physical chemistry and surface functionality, along with interfacial mechanics also influence cell-surface friction and control colony morphology, in particular 2D and 3D shape. This review focuses on the current understanding of the mechanisms in which physico-chemical interactions, deriving from surface functionality, impact individual cells and cell community behavior through their coupling with other interfacial processes.

Amphipathic dendritic poly-peptides carrier to deliver antisense oligonucleotides against multi-drug resistant bacteria in vitro and in vivo

Background

Outbreaks of infection due to multidrug-resistant (MDR) bacteria, especially Gram-negative bacteria, have become a global health issue in both hospitals and communities. Antisense oligonucleotides (ASOs) based therapeutics hold a great promise for treating infections caused by MDR bacteria. However, ASOs therapeutics are strangled because of its low cell penetration efficiency caused by the high molecular weight and hydrophilicity.

Results

Here, we designed a series of dendritic poly-peptides (DPP1 to DPP12) to encapsulate ASOs to form DSPE-mPEG2000 decorated ASOs/DPP nanoparticles (DP-AD1 to DP-AD12) and observed that amphipathic DP-AD2, 3, 7 or 8 with a positive charge ≥ 8 showed great efficiency to deliver ASOs into bacteria, but only the two histidine residues contained DP-AD7 and DP-AD8 significantly inhibited the bacterial growth and the targeted gene expression of tested bacteria in vitro. DP-AD7_anti-acpP remarkably increased the survival rate of septic mice infected by ESBLs-E. coli, exhibiting strong antibacterial effects in vivo.

Conclusions

For the first time, we designed DPP as a potent carrier to deliver ASOs for combating MDR bacteria and demonstrated the essential features, namely, amphipathicity, 8–10 positive charges, and 2 histidine residues, that are required for efficient DPP based delivery, and provide a novel approach for the development and research of the antisense antibacterial strategy.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01384-y.

Effects of Methyl, Ester, and Amine Surface Groups on Microbial Activity and Communities in Nitrifying Biofilms

The objective of this study was to determine how different attachment surface chemistries affected the initial and long-term performance and microbial populations of nitrifying biofilms under well-controlled hydrodynamic mixing conditions. While much previous research has focused on the effects of surface properties such as hydrophobicity on bacterial attachment in pure cultures, this study evaluated the effects of specific functional groups on mixed culture composition and functional behavior. Three surfaces with varying hydrophobicity and charge were evaluated for biofilm community development and performance: unmodified poly(dimethylsiloxane) (PDMS), which included terminal methyl groups and was relatively hydrophobic (P-Methyl), PDMS silanized with ester groups (P-Ester), which was uncharged and relatively hydrophilic, and PDMS modified with amine groups (P-Amine), which possessed a positive charge and was the most hydrophilic. The surface chemistries of the three attachment surfaces were characterized by contact angle goniometry, Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). These surfaces were inoculated with dilute activated sludge, and biofilms were grown in rotating annular bioreactors for 80 days, with experimental triplicates. Nitrification rates increased most rapidly in P-Amine biofilm reactors, and their biofilm communities contained significantly more Nitrosomonas (p < 0.05) than those on the other surfaces in early growth stages (days 40-50). From days 50-60, the P-Amine surface biofilm had significantly higher nitrate production rates than the P-Methyl and P-Ester biofilms. The biofilms grown on the P-Amine and P-Methyl surfaces were significantly (p < 0.05) more diverse than the P-Ester biofilms, containing higher relative abundances of the order Rhizobiales, including a significantly higher abundance of the nitrifying genus Nitrobacter (p < 0.05), which coincided with higher rates of nitrate generation. Conversely, biofilms grown on the uncharged hydrophilic P-Ester surface were consistently less productive and had lower diversity than biofilms on the other surfaces. These results indicate that surface chemistry may be a useful design parameter to improve the performance of nitrifying biofilm systems for wastewater treatment and that surface chemistry affects mixed biofilm community composition.

Hybrid Polyester-Hydrogel Electrospun Scaffolds for Tissue Engineering Applications

Electrospinning is an attractive fabrication process providing a cost-effective and straightforward technic to make extra-cellular matrix (ECM) mimicking scaffolds that can be used to replace or repair injured tissues and organs. Synthetic polymers as poly (ε-caprolactone) (PCL) and poly (ethylene oxide terephthalate)-poly(butylene terephthalate) (PEOT/PBT) have been often used to produce scaffolds due to their good processability, mechanical properties, and suitable biocompatibility. While synthetic polymers can mimic the physical features of native ECM, natural polymers like alginate are better suited to recapitulate its hydrated state or introduce functional groups that are recognized by cells (e.g., -NH2). Thus, this study aims at creating electrospun meshes made of blended synthetic and natural polymers for tissue engineering applications. Polyethylene oxide (PEO), PCL, and PEOT/PBT were used as a carrier of Alginate. Scaffolds were electrospun at different flow rates and distances between spinneret and collector (air gap), and the resulting meshes were characterized in terms of fiber morphology, diameter, and mesh inter-fiber pore size. The fiber diameter increased with increasing flow rate, while there was no substantial influence of the air gap. On the other hand, the mesh pore size increased with increasing air gap, while the effect of flow rate was not significant. Cross-linking and washing of alginate electrospun scaffolds resulted in smaller fiber diameter. These newly developed scaffolds may find useful applications for tissue engineering strategies as they resemble physical and chemical properties of tissue ECM. Human Dermal Fibroblasts were cultured on PCL and PCL/Alginate scaffolds in order to create a dermal substitute.

Antifouling and Antibacterial Properties Constructed by Quaternary Ammonium and Benzyl Ester Derived from Lysine Methacrylamide

Hemocompatibility and antibacterial property are essential for blood contact devices and medical intervention materials. In this study, positively charged quaternary ammonium (QAC) and hydrophobic benzyl group (OBzl) were introduced onto hydrophilic lysine methacrylamide (LysAAm) to obtain two monomers LysAAm-QAC and LysAAm-OBzl, respectively. The structure characterizations of LysAAm-QAC and LysAAm-OBzl were determined by proton nuclear magnetic resonance, Fourier transform infrared spectroscopy, and time-of-flight secondary ion mass spectrometry. LysAAm-QAC and LysAAm-OBzl were cografted onto a silicon wafer with different feeding ratios to construct antifouling and antibacterial properties. The results of fibrinogen adsorption and platelet adhesion proved that the modified sample with the feeding ratio of 3:7 had superior antifouling property. Furthermore, an antimicrobial test with both 2 and 24 h indicated that the modified sample with the feeding ratio of 3:7 had antibacterial ability. The antifouling property was provided by the high surface coverage of LysAAm-QAC and LysAAm-OBzl (91.49%) and the hydrophilic main structure LysAAm on LysAAm-QAC and LysAAm-OBzl (water contact angle was 43.6°). The antibacterial property was improved with the proportion of LysAAm-OBzl (43.6-58.5%) because the increasing hydrophobic OBzl enhanced the ability to insert into the membrane of bacteria and raise the bactericidal efficiency. In application, LysAAm-QAC and LysAAm-OBzl with the feeding ratio of 3:7 were grafted onto the surface of poly(styrene-b-(ethylene-co-butylene)-b-styrene), and a bifunctional surface with antifouling and antibacterial properties was fabricated, which had promising applications in blood contact devices and medical intervention materials.

Fabrication of Acrylonitrile-Butadiene-Styrene Nanostructures with Anodic Alumina Oxide Templates, Characterization and Biofilm Development Test for Staphylococcus epidermidis

Medical devices can be contaminated by microbial biofilm which causes nosocomial infections. One of the strategies for the prevention of such microbial adhesion is to modify the biomaterials by creating micro or nanofeatures on their surface. This study aimed (1) to nanostructure acrylonitrile-butadiene-styrene (ABS), a polymer composing connectors in perfusion devices, using Anodic Alumina Oxide templates, and to control the reproducibility of this process; (2) to characterize the physico-chemical properties of the nanostructured surfaces such as wettability using captive-bubble contact angle measurement technique; (3) to test the impact of nanostructures on Staphylococcus epidermidis biofilm development. Fabrication of Anodic Alumina Oxide molds was realized by double anodization in oxalic acid. This process was reproducible. The obtained molds present hexagonally arranged 50 nm diameter pores, with a 100 nm interpore distance and a length of 100 nm. Acrylonitrile-butadiene-styrene nanostructures were successfully prepared using a polymer solution and two melt wetting methods. For all methods, the nanopicots were obtained but inside each sample their length was different. One method was selected essentially for industrial purposes and for better reproducibility results. The flat ABS surface presents a slightly hydrophilic character, which remains roughly unchanged after nanostructuration, the increasing apparent wettability observed in that case being explained by roughness effects. Also, the nanostructuration of the polymer surface does not induce any significant effect on Staphylococcus epidermidis adhesion.

Characterization of alkylsilane self-assembled monolayers by molecular simulation

Self-assembled monolayers (SAM) of dodecyltrichlorosilane (DTS) and octadecyltrichlorosilane (OTS) on silica are studied by molecular dynamics simulations at 298 K and 1 bar. The coverage (number of alkylsilane molecules per surface area) is systematically varied. The results yield insight into the properties of the alkylsilane SAMs, which complement experimental studies from the literature. Relationships are reported between thickness, tilt angle, and coverage of alkylsilane SAMs, which also hold for alkylsilanes other than DTS and OTS. They are interpreted based on the information on molecular ordering in the SAMs taken form the simulation data. System size and simulation time are much larger than in most former simulation works on the topic. This reduces the influence of the initial configuration as well as the periodic boundary conditions and hence minimizes the risk of artificial ordering. At the same time, more reliable statistics for the calculated properties can be provided. The evaluation of experimental data in the field is often based on strongly simplified models. The present simulation results suggest that some of these lead to errors, concerning the interpretation of experimental results, which could be avoided by introducing more realistic models.

In vitro and in vivo characterization of antibacterial activity and biocompatibility: a study on silver-containing phosphonate monolayers on titanium

Infections associated with implanted medical devices are a major cause of nosocomial infections, with serious medical and economic repercussions. A variety of silver-containing coatings have been proposed to decrease the risk of infection by hindering bacterial adhesion and biofilm formation. However, the therapeutic range of silver is relatively narrow and it is important to minimize the amount of silver in the coatings, in order to keep sufficient antibacterial activity without inducing cytotoxicity. In this study, the antibacterial efficiency and biocompatibility of nanocoatings with minimal silver loading (∼0.65 nmol cm(-2)) was evaluated in vitro and in vivo. Titanium substrates were coated by grafting mercaptododecylphosphonic acid (MDPA) monolayers followed by post-reaction with AgNO3. The MDPA/AgNO3 nanocoatings significantly inhibited Escherichia coli and Staphylococcus epidermidis adhesion and biofilm formation in vitro, while allowing attachment and proliferation of MC3T3-E1 preosteoblasts. Moreover, osteogenic differentiation of MC3T3 cells and murine mesenchymal stem cells was not affected by the nanocoatings. Sterilization by ethylene oxide did not alter the antibacterial activity and biocompatibility of the nanocoatings. After subcutaneous implantation of the materials in mice, we demonstrated that MDPA/AgNO3 nanocoatings exhibit significant antibacterial activity and excellent biocompatibility, both in vitro and in vivo, after postoperative seeding with S. epidermidis. These results confirm the interest of coating strategies involving subnanomolar amounts of silver exposed at the extreme surface for preventing bacterial adhesion and biofilm formation on metallic or ceramic medical devices without compromising their biocompatibility.

Self-assembled molecular platforms for bacteria/material biointerface studies: importance to control functional group accessibility

Highly controlled mixed molecular layers are crucial to study the role of material surface chemistry in biointerfaces, such as bacteria and subsequent biofilms interacting with biomaterials. Silanes with non-nucleophilic functional groups are promising to form self-assembled monolayers (SAMs) due to their low sensitivity to side-reactions. Nevertheless, the real control of surface chemistry, layer structure, and organization has not been determined. Here, we report a comprehensive synthesis and analysis of undecyltrichlorosilane- and 11-bromoundecyltrichlorosilane-based mixed SAMs on silicon substrates. The impact of the experimental conditions on the control of surface chemistry, layer structure, and organization was investigated by combining survey and high-resolution X-ray photoelectron spectroscopy analysis, wettability measurements, and ellipsometry. The most appropriate conditions were first determined for elaborating highly reproducible, but easily made, pure 11-bromoundecyltrichlorosilane SAMs. We have demonstrated that the control is maintained on more complex surfaces, i.e., surfaces revealing various chemical densities, which were obtained with different ratios of undecyltrichlorosilane and 11-bromoundecyltrichlorosilane. The control is also maintained after bromine to amine group conversion via SN2 bromine-to-azide reactions. The appropriateness of such highly controlled amino- and methyl-group revealing platforms (NH2-X%/CH3) for biointerface studies was shown by the higher reproducibility of bacterial adhesion on NH2-100%/CH3 SAMs compared to bacterial adhesion on molecular layers of overall similar surface chemistry but less control at the molecular scale.

Bioengineered surfaces promote specific protein-glycan mediated binding of the gastric pathogen Helicobacter pylori

Helicobacter pylori colonizes the gastric mucosa of half of the worlds population and persistent infection is related with an increase in the risk of gastric cancer. Adhesion of H. pylori to the gastric epithelium, which is essential for infection, is mediated by bacterial adhesin proteins that recognize specific glycan structures (Gly-R) expressed in the gastric mucosa. The blood group antigen binding adhesin (BabA) recognizes difucosylated antigens such as Lewis B (Leb), while the sialic acid binding adhesin (SabA) recognizes sialylated glycoproteins and glycolipids, such as sialyl-Lewis x (sLex). This work aimed to investigate whether these Gly-Rs (Leb and sLex) can attract and specifically bind H. pylori after immobilization on synthetic surfaces (self-assembled monolayers (SAMs) of alkanethiols on gold). Functional bacterial adhesion assays for (Gly-R)-SAMs were performed using H. pylori strains with different adhesin protein profiles. The results demonstrate that H. pylori binding to surfaces occurs via interaction between its adhesins and cognate (Gly-R)-SAMs and bound H. pylori maintains its characteristic rod-shaped morphology only during conditions of specific adhesin-glycan binding. These results offer new insights into innovative strategies against H. pylori infection based on the scavenging of bacteria from the stomach using specific H. pylori chelating biomaterials.

Modification of the surfaces of medical devices to prevent microbial adhesion and biofilm formation

BACKGROUND

The development of devices with surfaces that have an effect against microbial adhesion or viability is a promising approach to the prevention of device-related infections.

AIM

To review the strategies used to design devices with surfaces able to limit microbial adhesion and/or growth.

METHODS

A PubMed search of the published literature.

FINDINGS

One strategy is to design medical devices with a biocidal agent. Biocides can be incorporated into the materials or coated or covalently bonded, resulting either in release of the biocide or in contact killing without release of the biocide. The use of biocides in medical devices is debated because of the risk of bacterial resistance and potential toxicity. Another strategy is to modify the chemical or physical surface properties of the materials to prevent microbial adhesion, a complex phenomenon that also depends directly on microbial biological structure and the environment. Anti-adhesive chemical surface modifications mostly target the hydrophobicity features of the materials. Topographical modifications are focused on roughness and nanostructures, whose size and spatial organization are controlled. The most effective physical parameters to reduce bacterial adhesion remain to be determined and could depend on shape and other bacterial characteristics.

CONCLUSIONS

A prevention strategy based on reducing microbial attachment rather than on releasing a biocide is promising. Evidence of the clinical efficacy of these surface-modified devices is lacking. Additional studies are needed to determine which physical features have the greatest potential for reducing adhesion and to assess the usefulness of antimicrobial coatings other than antibiotics.

Reducing Staphylococcus aureus biofilm formation on stainless steel 316L using functionalized self-assembled monolayers

Stainless steel 316L (SS316L) is a common material used in orthopedic implants. Bacterial colonization of the surface and subsequent biofilm development can lead to refractory infection of the implant. Since the greatest risk of infection occurs perioperatively, strategies that reduce bacterial adhesion during this time are important. As a strategy to limit bacterial adhesion and biofilm formation on SS316L, self-assembled monolayers (SAMs) were used to modify the SS316L surface. SAMs with long alkyl chains terminated with hydrophobic (-CH3) or hydrophilic (oligoethylene glycol) tail groups were used to form coatings and in an orthogonal approach, SAMs were used to immobilize gentamicin or vancomycin on SS316L for the first time to form an "active" antimicrobial coating to inhibit early biofilm development. Modified SS316L surfaces were characterized using surface infrared spectroscopy, contact angles, MALDI-TOF mass spectrometry and atomic force microscopy. The ability of SAM-modified SS316L to retard biofilm development by Staphylococcus aureus was functionally tested using confocal scanning laser microscopy with COMSTAT image analysis, scanning electron microscopy and colony forming unit analysis. Neither hydrophobic nor hydrophilic SAMs reduced biofilm development. However, gentamicin-linked and vancomycin-linked SAMs significantly reduced S. aureus biofilm formation for up to 24 and 48 h, respectively.

Effect of bacterial biofilms formed on fouling-release coatings from natural seawater and Cobetia marina, on the adhesion of two marine algae

Previous studies have shown that bacterial biofilms formed from natural seawater (NSW) enhance the settlement of spores of the green alga Ulva linza, while single-species biofilms may enhance or reduce settlement, or have no effect at all. However, the effect of biofilms on the adhesion strength of algae, and how that may be influenced by coating/surface properties, is not known. In this study, the effect of biofilms formed from natural seawater and the marine bacterium Cobetia marina, on the settlement and the adhesion strength of spores and sporelings of the macroalga U. linza and the diatom Navicula incerta, was evaluated on Intersleek(®) 700, Intersleek(®) 900, poly(dimethylsiloxane) and glass. The settlement and adhesion strength of these algae were strongly influenced by biofilms and their nature. Biofilms formed from NSW enhanced the settlement (attachment) of both algae on all the surfaces while the effect of biofilms formed from C. marina varied with the coating type. The adhesion strength of spores and sporelings of U. linza and diatoms was reduced on all the surfaces biofilmed with C. marina, while adhesion strength on biofilms formed from NSW was dependent on the alga (and on its stage of development in the case of U. linza), and coating type. The results illustrate the complexity of the relationships between fouling algae and bacterial biofilms and suggest the need for caution to avoid over-generalisation.

Anti-fouling chemistry of chiral monolayers: enhancing biofilm resistance on racemic surface

This work reports the resistance to protein adsorption and bacterial biofilm formation by chiral monolayers of polyol-terminated alkanethiols surrounding micrometer-sized patterns of methyl-terminated alkanethiols on gold films. We discover that patterned surfaces surrounded by chiral polyol monolayers can distinguish different stages of biofilm formation. After inoculation on the surfaces, bacteria first reversibly attached on the chiral polyol monolayers. Over time, the bacteria detached from the polyol surfaces, and attached on the hydrophobic micropatterns to form biofilms. Interestingly, while both enantiomers of gulitol- and mannonamide-terminated monolayer resisted adsorption of proteins (bovine serum albumin, lysozyme, and fibrinogen) and confined biofilms formed on the micropatterns, the monolayers formed by the racemic mixture of either pair of enantiomers exhibited stronger antifouling chemistry against both protein adsorption and biofilm formation than monolayers formed by one enantiomer alone. These results reveal the different chemistries that separate the different stages of biofilm formation, and the stereochemical influence on resisting biofoulings at a molecular-level.

Non-invasive vibrational SFG spectroscopy reveals that bacterial adhesion can alter the conformation of grafted "brush" chains on SAM

Understanding bacterial adhesion on a surface is a crucial step to design new materials with improved properties or to control biofilm formation and eradication. Sum Frequency Generation (SFG) vibrational spectroscopy has been employed to study in situ the conformational response of a self-assembled monolayer (SAM) of octadecanethiol (ODT) on a gold film to the adhesion of hydrophilic and hydrophobic ovococcoid model bacteria. The present work highlights vibrational SFG spectroscopy as a powerful and unique non-invasive biophysical technique to probe and control bacteria interaction with ordered surfaces. Indeed, the SFG vibrational spectral changes reveal different ODT SAM conformations in air and upon exposure to aqueous solution or bacterial adhesion. Furthermore, this effect depends on the bacterial cell surface properties. The SFG spectral modeling demonstrates that hydrophobic bacteria flatten the ODT SAM alkyl chain terminal part, whereas the hydrophilic ones raise this ODT SAM terminal part. Microorganism-induced alteration of grafted chains can thus affect the desired interfacial functionality, a result that should be considered for the design of new reactive materials.

Experimental and theoretical examination of surface energy and adhesion of nitrifying and heterotrophic bacteria using self-assembled monolayers

Biofilm-based systems, including integrated fixed-film activated sludge and moving bed bioreactors, are becoming increasingly popular for wastewater treatment, often with the goal of improving nitrification through the enrichment of ammonia and nitrite oxidizing bacteria. We have previously demonstrated the utility of self-assembled monolayers (SAMs) as tools for studying the initial attachment of bacteria to substrata systematically varying in physicochemical properties. In this work, we expanded these studies to bacteria of importance in wastewater treatment systems and we demonstrated attachment rates were better correlated with surface energy than with wettability (water contact angle). Toward the long-term goal of improving wastewater treatment performance through the strategic design of attachment substrata, the attachment rates of two autotrophic ammonia-oxidizing bacteria (Nitrosomonas europaea and Nitrosospira multiformis) and a heterotroph (Escherichia coli) were evaluated using SAMs with a range of wettabilities, surface energies, and functional properties (methyl, hydroxyl, carboxyl, trimethylamine, and amine terminated). Cell attachment rates were somewhat correlated with the water contact angles of the SAMs with polar terminal groups (hydroxyl, carboxyl, trimethylamine, and amine). Including all SAM surfaces, a better correlation was found for all bacteria between attachment rates and surface free energy, as determined using the Lewis Acid-Base approach. The ammonia-oxidizers had higher adhesion rates on the SAMs with higher surface energies than did the heterotroph. This work demonstrated the successful application of SAMs to determine the attachment surface preferences of bacteria important to wastewater treatment, and it provides guidance for a new area of research aimed at improving treatment performance through rational attachment surface design.

Interactions of bacteria with specific biomaterial surface chemistries under flow conditions

The effect of specific chemical functionalities on the adhesion of two Staphylococcus epidermidis strains under flow was investigated by using surfaces prepared by self-assembly of alkyl silane monolayers on glass. Terminal methyl (CH(3)) and amino (NH(2)) groups were formed in solution and by chemical vapor deposition of silanes, at elevated temperature. Hydroxyl (OH)-terminated glass was used as control. Surface modification was verified by contact angle and zeta potential measurements, atomic force microscopy and X-ray photoelectron spectroscopy. A parallel plate flow chamber was used to evaluate bacterial adhesion at various shear rates. The effect of the solution's ionic strength on adhesion was also studied. Adhesion was found to be dependent on the monolayer's terminal functionality. It was higher on the CH(3) followed by the NH(2) and minimal on the OH-terminated glass for both strains. The increase in the ionic strength significantly enhanced adhesion to the various substrates, in accordance with the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The extended DLVO theory explained well the combined effects of surface and solution properties on bacterial adhesion under low shear rates. However, the increase in the shear rate restricted the predictability of the theory and revealed macromolecular interactions between bacteria and NH(2)-terminated surfaces.

Development of the primary bacterial microfouling layer on antifouling and fouling release coatings in temperate and tropical environments in Eastern Australia

The role played by bacteria during the pioneering stages of colonisation on marine coatings was investigated over three distinct seasons in both tropical and temperate environments. Novel methods were developed to facilitate the study of the adhered bacterial population on the test coatings in their native, hydrated state. The approach eliminated destructive sample preparation techniques, including sample dehydration and/or removal from the substratum surface prior to analysis. Bacterial colonisation during initial biofilm formation was evaluated on two antifouling paints, Intersmooth 360 and Super Yacht 800, and a fouling release coating, Intersleek 700. Bacterial colonisation was quantified on all three coating surfaces. Intersleek 700 displayed the quickest colonisation by bacteria, resulting in major modification of the substratum surface within 2-4 days following immersion in the ocean. Whilst fouling accumulated more quickly on Intersleek 700, by 16 days all three coatings were fouled significantly. Bacterial fouling was correlated to both location and season, with fouling occurring at a more rapid rate at the Cairns location, as well as during the summer months, when higher water temperatures were recorded. Successful colonisation of all coatings by bacteria soon after immersion modifies the characteristics of the surfaces at the hull/water interface, and subsequent settlement by higher biofouling organisms must be moderated by these modified surfaces.

Adhesion forces between Staphylococcus epidermidis and surfaces bearing self-assembled monolayers in the presence of model proteins

Self-assembled monolayers (SAMs) are being developed into coatings to reduce microbial biofilm formation on biomaterials. To test anti-adhesion properties, SAMs can be easily constructed on gold, and used to represent a coated biomaterial. However, coatings that prevent bacterial adhesion must also resist protein adsorption. We explored the competitive effects of bacteria and protein for adsorption to SAMs, choosing fetal bovine serum (FBS) to represent protein non-specific binding, and fibronectin (FN) to evaluate ligand/receptor binding. Staphylococcus epidermidis were immobilized on an atomic force microscope (AFM) tip and used as a force probe to detect the interaction forces between bacteria and gold-coated SAMs. The SAMs tested were alkanethiol molecules terminating in isophthalic acid (IPA) or isophthalic acid with silver (IAG). While S. epidermidis showed weak interactions with FBS, the bacteria showed strong adhesion with FN, due to ligand/receptor binding. Bacterial retention and viability experiments were correlated with the force measurements. S. epidermidis interacting with IAG SAMs showed a loss of viability, due to the mobility of silver ions. For most substrata, there was a link between high adhesion forces with bacteria and a high percentage of dead cells being retained on that substratum (even in the absence of a specific biocidal effect, such as silver). This may suggest that high adhesion forces can cause stress to the bacteria which contributed to their death. The relationship between highly adhesive SAMs and bacterial inactivation may be useful in future biomaterial design. When evaluating coatings for biomaterials, it is important to consider the interplay between bacteria, proteins, and the coating material.

Time lapse confocal microscopy studies of bacterial adhesion to self-assembled monolayers and confirmation of a novel approach to the thermodynamic model

In this study, we use thermodynamic theory to develop a novel model that allows for the quantitative determination of the Gibbs free energy of adhesion for the initial bacterial attachment process. This model eliminates the need to calculate interfacial free energies and instead relies on easily measurable contact angles to determine DeltaG(adh). We experimentally verify our model using real-time observation of the initial attachment of Pseudomonas putida to methyl- and hydroxyl-terminated self-assembled monolayers. We also test the applicability of our model to a variety of experimental conditions using data available in the literature. We show that the initial attachment process is governed by dispersion forces and is accurately predicted by our model. Also, we find that our model is simple to apply and accurate for a variety of experimental conditions.

Inhibition of Escherichia coli biofilm formation by self-assembled monolayers of functional alkanethiols on gold

Bacterial biofilms cause serious problems, such as antibiotic resistance and medical device-related infections. To further understand bacterium-surface interactions and to develop efficient control strategies, self-assembled monolayers (SAMs) of alkanethiols presenting different functional groups on gold films were analyzed to determine their resistance to biofilm formation. Escherichia coli was labeled with green florescence protein, and its biofilm formation on SAM-modified surfaces was monitored by confocal laser scanning microscopy. The three-dimensional structures of biofilms were analyzed with the COMSTAT software to obtain information about biofilm thickness and surface coverage. SAMs presenting methyl, L-gulonamide (a sugar alcohol tethered with an amide bond), and tri(ethylene glycol) (TEG) groups were tested. Among these, the TEG-terminated SAM was the most resistant to E. coli biofilm formation; e.g., it repressed biofilm formation by E. coli DH5alpha by 99.5% +/- 0.1% for 1 day compared to the biofilm formation on a bare gold surface. When surfaces were patterned with regions consisting of methyl-terminated SAMs surrounded by TEG-terminated SAMs, E. coli formed biofilms only on methyl-terminated patterns. Addition of TEG as a free molecule to growth medium at concentrations of 0.1 and 1.0% also inhibited biofilm formation, while TEG at concentrations up to 1.5% did not have any noticeable effects on cell growth. The results of this study suggest that the reduction in biofilm formation on surfaces modified with TEG-terminated SAMs is a result of multiple factors, including the solvent structure at the interface, the chemorepellent nature of TEG, and the inhibitory effect of TEG on cell motility.

Formation of mixed monolayers of silsesquioxanes and alkylsilanes on gold

The formation of mixed monolayers of hydridospherosilsesquioxane clusters (H(8)Si(8)O(12)) and alkylsilanes (H(2n+1)C(n)SiH(3)) on Au has been investigated using X-ray photoelectron and reflection-absorption infrared spectroscopies and scanning tunneling microscopy. All of the techniques indicate the displacement of the majority of the siloxane clusters from the surface in favor of the alkylsilane.

Recent developments in superhydrophobic surfaces and their relevance to marine fouling: a review

In this review, a brief synopsis of superhydrophobicity (i.e. extreme non-wettability) and its implications on marine fouling are presented. A short overview of wettability and recent experimental developments aimed at fabricating superhydrophobic surfaces by tailoring their chemical nature and physical appearance (i.e. substratum texture) are reviewed. The formation of responsive/"smart" surfaces, which adjust their physico-chemical properties to variations in some outside physical stimulus, including light, temperature, electric field, or solvent, is also described. Finally, implications of tailoring the surface chemistry, texture, and responsiveness of surfaces on the design of effective marine fouling coatings are considered and discussed.

The effect of solid surface tension and exposure to elevated hydrodynamic shear on Pseudomonas fluorescens biofilms grown on modified titanium surfaces

The solid surface tension of titanium was varied by using organosilane monolayers of various terminations, minimising differences in other material properties. Both the quantity of Pseudomonas fluorescens biofilms grown on the modified surfaces, and the percentage of biofilm remaining after exposure to hydrodynamic shear stress, varied significantly as a function of solid surface tension. The quantity of biofilm was less on chloropropyl-terminated surfaces than on an alkyl-terminated surfaces. However, the percentage of biofilm remaining after exposure to hydrodynamic shear stress (which depends on the adhesion and cohesion strengths of the biofilm) was less for the alkyl-terminated surface than for the chloropropyl-terminated surface, for one of the two sample sets analysed. These results demonstrate the importance of differentiating between the quantity of biofilm on a surface and the adhesion and cohesion strength of the biofilm, and may help explain discrepancies in the existing literature regarding the effect of solid surface tension on the propensity of a surface for microfouling.

Differences between chemisorbed and physisorbed biomolecules on particle deposition to hydrophobic surfaces

This study examines differences between chemisorbed and physisorbed biomolecules on bacterial adhesion to both hydrophobic and hydrophilic surfaces that are biologically nonspecific. Bacteria-sized latex microspheres were used as a simplified model in order to study these factors that affect microbial adhesion. Two biomolecules (protein A, poly-D-lysine) were covalently bound to microspheres in order to study the effect of proteins on particle filtration rates in columns packed with glass beads. When poly-D-lysine or protein A was covalently bonded to the microspheres, sticking coefficients (a) for the microspheres increased by up to an order of magnitude as compared with uncoated latex microspheres. The glass packing beads were then made hydrophobic by covalently attaching silane groups with different carbon-chain lengths (0.2, 1.2, and 2.8 nm). Sticking coefficients forthe uncoated microspheres on these silanized packing beads (alpha = 0.15 at 1 mM ionic strength; 0.76 at 100 mM) were larger than those on uncoated glass packing beads (0.02 at 1 mM; 0.15 at 100 mM). In addition, adhesion increased with ionic strength on both hydrophobic and hydrophilic surfaces. Physical adsorption gave different results. When either dextran or protein A was physically adsorbed to both the microspheres and the column, no appreciable change in adhesion was observed. Covalently attaching protein A to the microspheres increased their hydrophobicity, but sticking coefficients were large regardless of the substrate hydrophobicity as a result of biomolecule-surface interactions. This study demonstrates that, at high ionic strength, covalently attached hydrophobic species give much higher sticking coefficients for particles than do physically adsorbed species.

Effect of substratum surface chemistry and surface energy on attachment of marine bacteria and algal spores

Two series of self-assembled monolayers (SAMs) of omega-substituted alkanethiolates on gold were used to systematically examine the effects of varying substratum surface chemistry and energy on the attachment of two model organisms of interest to the study of marine biofouling, the bacterium Cobetia marina (formerly Halomonas marina) and zoospores of the alga Ulva linza (formerly Enteromorpha linza). SAMs were formed on gold-coated glass slides from solutions containing mixtures of methyl- and carboxylic acid-terminated alkanethiols and mixtures of methyl- and hydroxyl-terminated alkanethiols. C. marina attached in increasing numbers to SAMs with decreasing advancing water contact angles (theta(AW)), in accordance with equation-of-state models of colloidal attachment. Previous studies of Ulva zoospore attachment to a series of mixed methyl- and hydroxyl-terminated SAMs showed a similar correlation between substratum theta(AW) and zoospore attachment. When the hydrophilic component of the SAMs was changed to carboxylate, however, the profile of attachment of Ulva was significantly different, suggesting that a more complex model of interfacial energetics is required.

Chemical force microscopy of mixed self-assembled monolayers of alkanethiols on gold: evidence for phase separation

Mixed self-assembled monolayers formed by the coadsorption of hydroxyl- and methyl-terminated alkanethiols with similar chain lengths have been characterized by friction force microscopy. Friction coefficients have been determined by assuming a fit to Amonton's law. The friction coefficients vary linearly with the fraction of polar-terminated adsorbates in the self-assembled monolayer (SAM). With carboxylic acid-terminated tips, the coefficient of friction increases with the fraction of hydroxyl-terminated thiols, while with methyl-terminated tips it decreases. Similar trends are observed for pull-off forces, which increase and decrease as a function of the fraction of polar-terminated adsorbates for carboxylic acid- and methyl-terminated adsorbates, respectively. Analysis of histograms of adhesion forces has yielded insights into the phase structure of mixed SAMs. Single-component monolayers yield histograms that may be fitted to symmetric Gaussian distributions, irrespective of the nature of the terminal group on either the tip or the SAM. However, mixed monolayers yield broad, asymmetric distributions that could not be fitted with a Gaussian distribution. The best explanation for these data is that mixed SAMs of hydroxyl- and methyl-terminated alkanethiols of similar chain length form phase-separated structures.

Polymer surfaces derivatized with poly(vinyl-N-hexylpyridinium) kill airborne and waterborne bacteria

A facile methodology has been developed for covalently derivatizing the surfaces of common materials with a designed antibacterial polycation, poly(vinyl-N-pyridinium bromide), wherein the first, key step involves surface coating with a nanolayer of silica. Various commercial synthetic polymers derivatized in this manner become bactericidal-they kill up to 99% of deposited, from either an aerosol or an aqueous suspension, Gram-positive and Gram-negative bacteria on contact.

Staphylococcus epidermidis RP62A adhesion to chemically modified cellulose derivatives

The adhesion of coagulase negative Staphylococcus epidermidis expressing capsular polysaccharide/adhesin (PS/A) to cellulose diacetate (CDA), as well as to primary reference low-density polyethylene, was assessed in vitro. Attached bacteria were released by gentle sonication and quantified as colony forming units. Surface free energy of cells and materials and the free energy of interaction between cells, each type of material and water molecules was calculated through contact angle measurement, also enabling the determination of materials surface hydrophobicity. The influence of CDA surface modification by deacetylation and phosphorylation on bacterial adhesion was studied. Chemical modifications of CDA by deacetylation and by phosphorylation were effective in lowering bacterial adhesion.

Use of self-assembled monolayers of different wettabilities to study surface selection and primary adhesion processes of green algal (Enteromorpha) zoospores

We investigated surface selection and adhesion of motile zoospores of a green, macrofouling alga (Enteromorpha) to self-assembled monolayers (SAMs) having a range of wettabilities. The SAMs were formed from alkyl thiols terminated with methyl (CH(3)) or hydroxyl (OH) groups or mixtures of CH(3)- and OH-terminated alkyl thiols and were characterized by measuring the advancing contact angles and by X-ray photoelectron spectroscopy. There was a positive correlation between the number of spores that attached to the SAMs and increasing contact angle (hydrophobicity). Moreover, the sizes of the spore groups (adjacent spores touching) were larger on the hydrophobic SAMs. Video microscopy of a patterned arrangement of SAMs showed that more zoospores were engaged in swimming and "searching" above the hydrophobic sectors than above the hydrophilic sectors, suggesting that the cells were able to "sense" that the hydrophobic surfaces were more favorable for settlement. The results are discussed in relation to the attachment of microorganisms to substrata having different wettabilities.

Bacterial primary colonization and early succession on surfaces in marine waters as determined by amplified rRNA gene restriction analysis and sequence analysis of 16S rRNA genes

The nearly universal colonization of surfaces in marine waters by bacteria and the formation of biofilms and biofouling communities have important implications for ecological function and industrial processes. However, the dynamics of surface attachment and colonization in situ, particularly during the early stages of biofilm establishment, are not well understood. Experimental surfaces that differed in their degrees of hydrophilicity or hydrophobicity were incubated in a salt marsh estuary tidal creek for 24 or 72 h. The organisms colonizing these surfaces were examined by using a cultivation-independent approach, amplified ribosomal DNA restriction analysis. The goals of this study were to assess the diversity of bacterial colonists involved in early succession on a variety of surfaces and to determine the phylogenetic affiliations of the most common early colonists. Substantial differences in the representation of different cloned ribosomal DNA sequences were found when the 24- and 72-h incubations were compared, indicating that some new organisms were recruited and some other organisms were lost. Phylogenetic analyses of the most common sequences recovered showed that the colonists were related to organisms known to inhabit surfaces or particles in marine systems. A total of 22 of the 26 clones sequenced were affiliated with the Roseobacter subgroup of the alpha subdivision of the division Proteobacteria (alpha-Proteobacteria), and most of these clones were recovered at a high frequency from all surfaces after 24 or 72 h of incubation. Two clones were affiliated with the Alteromonas group of the gamma-Proteobacteria and appeared to be involved only in the very early stages of colonization (within the first 24 h). A comparison of the colonization patterns on the test surfaces indicated that the early bacterial community succession rate and/or direction may be influenced by surface physicochemical properties. However, organisms belonging to the Roseobacter subgroup are ubiquitous and rapid colonizers of surfaces in coastal environments.

The effect of extracellular polymeric substances on the attachment of Pseudomonas NCIMB 2021 to AISI 304 and 316 stainless steel

Surfaces of AISI 304 and 316 stainless steels were pre-treated with three different types of extracellular polymeric substances, viz. (i) exopolymers released into the culture medium ("free"; or planktonic exopolymers), (ii) capsular exopolymers, and (iii) biofilm exopolymers, produced by continuous cultures of marine Pseudomonas NCIMB 2021. The initial attachment of Pseudomonas cells to exopolymer-conditioned steel surfaces varied with the exopolymer type and concentration. Results gained from wettability studies of exopolymer-treated steel using contact angle measurements, as well as from the surface roughness measurements conducted employing atomic force microscopy analysis, could not account for the observed, statistically significant differences (p < 0.1) in the level of bacterial surface colonisation. It is therefore proposed that neither surface hydrophobicity nor roughness play an important part in the early attachment of Pseudomonas NCIMB 2021 to the conditioned steel surfaces and that a difference in the chemistry of the exopolymers is most likely a key parameter influencing initial cell adhesion to pre-treated steel.

Comparison of proliferation and growth of human keratinocytes on plasma copolymers of acrylic acid/1,7-octadiene and self-assembled monolayers

Human keratinocytes were cultured on plasma copolymers (PCPs), self-assembled monolayers (SAMs), and tissue culture poly(styrene) (TCPS). Plasma copolymerization was used to deposit films with controlled concentrations of carboxylic acid functional groups (<5%). Human keratinocytes were cultured onto these PCP surfaces, TCPS, and collagen I. A hydrocarbon plasma polymer surface was used as the negative control. Keratinocyte attachment was measured at 24 h and cell proliferation and growth at 3 and 7 days using optical microscopy and DNA concentrations. The PCP surfaces were compared with two SAM systems comprising pure acid and pure hydrocarbon functionalities, and pure gold was used as a control surface. PCP surfaces containing carboxylic acid functionalities promoted keratinocyte attachment. The level of attachment on these surfaces was comparable to that seen on collagen I, a preferred substratum for the culturing of keratinocytes. After several days in culture the cells were well attached and proliferative, forming confluent sheets of keratinocytes. This result was confirmed by DNA assays that suggested the acid PCP surfaces were performing as well as collagen I. Keratinocytes attached well to gold and acid-terminated SAMs but attached poorly to methyl-terminated SAMs. The acid functionality also promoted proliferation and growth of keratinocytes after several days in culture. DNA assays revealed that keratinocyte growth on the acid surface was higher than on collagen I.

Effect of ionic strength on initial interactions of Escherichia coli with surfaces, studied on-line by a novel quartz crystal microbalance technique

A novel quartz crystal microbalance (QCM) technique was used to study the adhesion of nonfimbriated and fimbriated Escherichia coli mutant strains to hydrophilic and hydrophobic surfaces at different ionic strengths. This technique enabled us to measure both frequency shifts (Deltaf), i.e., the increase in mass on the surface, and dissipation shifts (DeltaD), i.e., the viscoelastic energy losses on the surface. Changes in the parameters measured by the extended QCM technique reflect the dynamic character of the adhesion process. We were able to show clear differences in the viscoelastic behavior of fimbriated and nonfimbriated cells attached to surfaces. The interactions between bacterial cells and quartz crystal surfaces at various ionic strengths followed different trends, depending on the cell surface structures in direct contact with the surface. While Deltaf and DeltaD per attached cell increased for nonfimbriated cells with increasing ionic strengths (particularly on hydrophobic surfaces), the adhesion of the fimbriated strain caused only low-level frequency and dissipation shifts on both kinds of surfaces at all ionic strengths tested. We propose that nonfimbriated cells may get better contact with increasing ionic strengths due to an increased area of contact between the cell and the surface, whereas fimbriated cells seem to have a flexible contact with the surface at all ionic strengths tested. The area of contact between fimbriated cells and the surface does not increase with increasing ionic strengths, but on hydrophobic surfaces each contact point seems to contribute relatively more to the total energy loss. Independent of ionic strength, attached cells undergo time-dependent interactions with the surface leading to increased contact area and viscoelastic losses per cell, which may be due to the establishment of a more intimate contact between the cell and the surface. Hence, the extended QCM technique provides new qualitative information about the direct contact of bacterial cells to surfaces and the adhesion mechanisms involved.

Attachment of bacteria to model solid surfaces: oligo(ethylene glycol) surfaces inhibit bacterial attachment

Bacterial cell attachment to the surfaces of self-assembled monolayers formed by the adsorption of omega-substituted alkanethiols on transparent gold films has been studied under defined bacterial culture and flow conditions. Phase contrast microscopy was used to quantify the attachment of two organisms, one of medical (Staphylococcus epidermidis) and one of marine (Deleya marina) importance. Self-assembled monolayers terminated with hexa(ethylene glycol), methyl, carboxylic acid and fluorocarbon groups were investigated. Over the range of experimental conditions, self-assembled monolayers formed from HS(CH2)11(OCH2CH2)6OH were found to be uniformly resistant to bacterial attachment, with a 99.7% reduction of attachment for both organisms when compared to the most fouled surface for each organism. On other surfaces, S. epidermidis and D. marina were shown to exhibit very different attachment responses to the wettability of the substratum. While the attachment of S. epidermidis correlated positively with surface hydrophilicity, D. marina showed a preference for hydrophobic surfaces. This study suggests that surfaces incorporating high densities of oligo(ethylene glycol) are good candidates for surfaces that interact minimally with bacteria.