Leaderless polypeptides efficiently extracted from whole cells by osmotic shock

Synthetic Amine Linkers for Efficient Sortagging

Enzymatic site-specific bioconjugation techniques, in particular sortase-mediated ligation, are increasingly used to generate conjugated proteins for a wide array of applications. Extension of the utility and practicality of sortagging for diverse purposes is critically dependent on further improvement of the efficiency of sortagging reactions with a wider structural variety of substrates. We present a comprehensive comparative mass spectrometry screening study of synthetic nonpeptidic incoming amine nucleophile substrates of Staphylococcus aureus Sortase A enzyme. We have identified the optimal structural motifs among the chemically diverse set of 452 model primary and secondary amine-containing sortagging substrates, and we demonstrate the utility of representative amine linkers for efficient C-terminal biotinylation of nanobodies.

Dropping Out and Other Fates of Transmembrane Segments Inserted by the SecA ATPase

Type II single-span membrane proteins, such as CadC or RodZ, lacking a signal sequence and having a far-downstream hydrophobic segment, require the SecA secretion motor for insertion into the inner membrane of Escherichia coli. Using two chimeric single-span proteins containing a designed hydrophobic segment H, we have determined the requirements for SecA-mediated secretion, the molecular distinction between TM domains and signal peptides, and the propensity for hydrophobic H-segments to remain embedded within the bilayer after targeting. By means of engineered H-segments and a strategically placed SPase I cleavage site, we determined how targeting and stability of the chimeric proteins are affected by the length and hydrophobicity of the H-segment. Very hydrophobic segments (e.g., 16 Leu) are stably incorporated into the inner membrane, resulting in a C-terminal anchored membrane protein, while a 24L construct was not targeted to the membrane by SecA and remained in the cytoplasm. However, a construct carrying preMalE at the N-terminus led to SecA targeting to SecYEG via the native signal sequence and stable insertion of the downstream 24L H-segment. We show that the RseP intramembrane protease degrades weakly stable H-segments and is a useful tool for investigating the borderline between stable and unstable TM segments. Using RseP^- cells, we find that moderately hydrophobic sequences (e.g., 5Leu + 11Ala) are targeted to SecYEG by SecA and inserted, but subsequently drop out of the membrane into the cytoplasm. Therefore, the free energy of transfer from translocon to bilayer is different from the transfer free energy from membrane to water.

Improved in-cell structure determination of proteins at near-physiological concentration

Investigating three-dimensional (3D) structures of proteins in living cells by in-cell nuclear magnetic resonance (NMR) spectroscopy opens an avenue towards understanding the structural basis of their functions and physical properties under physiological conditions inside cells. In-cell NMR provides data at atomic resolution non-invasively, and has been used to detect protein-protein interactions, thermodynamics of protein stability, the behavior of intrinsically disordered proteins, etc. in cells. However, so far only a single de novo 3D protein structure could be determined based on data derived only from in-cell NMR. Here we introduce methods that enable in-cell NMR protein structure determination for a larger number of proteins at concentrations that approach physiological ones. The new methods comprise (1) advances in the processing of non-uniformly sampled NMR data, which reduces the measurement time for the intrinsically short-lived in-cell NMR samples, (2) automatic chemical shift assignment for obtaining an optimal resonance assignment, and (3) structure refinement with Bayesian inference, which makes it possible to calculate accurate 3D protein structures from sparse data sets of conformational restraints. As an example application we determined the structure of the B1 domain of protein G at about 250 μM concentration in living E. coli cells.

Topology, dimerization, and stability of the single-span membrane protein CadC

Under acid stress, Escherichia coli induce expression of CadA (lysine decarboxylase) and CadB (lysine/cadaverine antiporter) in a lysine-rich environment. The ToxR-like transcriptional activator CadC controls expression of the cadBA operon. Using a novel signal peptidase I (SPase I) cleavage assay, we show that CadC is a type II single-span membrane protein (S-SMP) with a cytoplasmic DNA-binding domain and a periplasmic sensor domain. We further show that, as long assumed, dimerization of the sensor domain is required for activating the cadBA operon. We prove this using a chimera in which the periplasmic domain of RodZ-a type II membrane protein involved in the maintenance of the rod shape of E. coli-replaces the CadC sensor domain. Because the RodZ periplasmic domain cannot dimerize, the chimera cannot activate the operon. However, replacement of the transmembrane (TM) domain of the chimera with the glycophorin A TM domain causes intramembrane dimerization and consequently operon activation. Using a low-expression protocol that eliminates extraneous TM helix dimerization signals arising from protein over-expression, we enhanced dramatically the dynamic range of the β-galactosidase assay for cadBA activation. Consequently, the strength of the intramembrane dimerization of the glycophorin A domain could be compared quantitatively with the strength of the much stronger periplasmic dimerization of CadC. For the signal peptidase assay, we inserted an SPase I cleavage site (AAA or AQA) at the periplasmic end of the TM helix. Cleavage occurred with high efficiency for all TM and periplasmic domains tested, thus eliminating the need for the cumbersome spheroplast-proteinase K method for topology determinations.

Characterization of a periplasmic quinoprotein from Sphingomonas wittichii that functions as aldehyde dehydrogenase

The α-proteobacterium Sphingomonas wittichii RW1 is known for its ability to degrade dioxins and related toxic substances. Bioinformatic analysis of the genome indicated that this organism may contain the largest number of pyrroloquinoline quinone-dependent dehydrogenases of any bacteria sequenced so far. Sequence analysis also showed that one of these genes (swit_4395) encodes an enzyme that belongs to the class of periplasmic glucose dehydrogenases. This gene was fused to a pelB signal sequence and a strep-tag coding region at the 5' and 3' ends, respectively. The fusion product was cloned into the broad-host range expression vector pBBR1p264-Streplong and the corresponding protein was heterologously produced in Escherichia coli, purified via Strep-Tactin affinity chromatography, and characterized. The protein Swit_4395 had a subunit mass of 39.3 kDa and formed active homooctamers and homododecamers. The enzyme showed the highest activities with short- and medium-chain aldehydes (chain length C1-C6) and ketoaldehydes, such as methylglyoxal and phenylglyoxal. Butyraldehyde was the best substrate, with V max and apparent K M values of 3,970 U/mg protein and 12.3 mM, respectively. Pyrroloquinoline quinone was detected using UV-Vis spectroscopy and was found to be a prosthetic group of the purified enzyme. Therefore, Swit_4395 was identified as a pyrroloquinoline quinone-dependent aldehyde dehydrogenase. The enzyme could be purified from the native host when the expression vector was introduced into S. wittichii RW1, indicating homologous protein production. Overproduction of Swit_4395 in S. wittichii RW1 dramatically increased the tolerance of the bacterium toward butyraldehyde and thus might contribute to the detoxification of toxic aldehydes.

An approach to the production of soluble protein from a fungal gene encoding an aggregation-prone xylanase in Escherichia coli

The development of new procedures and protocols that allow researchers to obtain recombinant proteins is of fundamental importance in the biotechnology field. A strategy was explored to overcome inclusion-body formation observed when expressing an aggregation-prone fungal xylanase in Escherichia coli. pHsh is an expression plasmid that uses a synthetic heat-shock (Hsh) promoter, in which gene expression is regulated by an alternative sigma factor (σ(32)). A derivative of pHsh was constructed by fusing a signal peptide to xynA2 gene to facilitate export of the recombinant protein to the periplasm. The xylanase was produced in a soluble form. Three factors were essential to achieving such soluble expression of the xylanase: 1) the target gene was under the control of the Hsh promoter, 2) the gene product was exported into the periplasm, and 3) gene expression was induced by a temperature upshift. For the first time we report the expression of periplasmic proteins under the control of an Hsh promoter regulated by σ(32). One unique feature of this approach was that over 200 copies of the Hsh promoter in an E. coli cell significantly increased the concentration of σ(32). The growth inhibition of the recombinant cells corresponded to an increase in the levels of soluble periplasmic protein. Therefore, an alternative protocol was designed to induce gene expression from pHsh-ex to obtain high levels of active soluble enzymes.

Export is the default pathway for soluble unfolded polypeptides that accumulate during expression in Escherichia coli

Several E. coli endogenous, cytoplasmic proteins that are known clients of the chaperonin GroEL were overexpressed to examine the fate of accumulated unfolded polypeptides. Substantial fractions of about half of the proteins formed insoluble aggregates, consistent with the hypothesis that these proteins were produced at rates or in amounts that exceeded the protein-folding capacity of GroEL. In addition, large fractions of three overexpressed GroEL client proteins were localized in an extra-cytoplasmic, osmotically-sensitive compartment, suggesting they had initially accumulated in the cytoplasm as soluble unfolded polypeptides and thus were able to access a protein export pathway. Consistent with this model, an intrinsically unfoldable, hydrophilic, non-secretory polypeptide was quantitatively exported from the E. coli cytoplasm into an osmotically-sensitive compartment. Our results support the conclusion that a soluble, unfolded conformation alone may be sufficient to direct non-secretory polypeptides into a protein export pathway for signal peptide-independent translocation across the inner membrane, and that export rather than degradation by cytoplasmic proteases is the preferred fate for newly-synthesized, soluble, unfolded polypeptides that accumulate in the cytoplasm. The stable folded conformation of exported GroEL client proteins further suggests that the requirement for GroEL may be conditional on protein folding in the molecularly-crowded environment of the cytoplasm.

NMR protein structure determination in living E. coli cells using nonlinear sampling

The cell is a crowded environment in which proteins interact specifically with other proteins, nucleic acids, cofactors and ligands. Atomic resolution structural explanation of proteins functioning in this environment is a main goal of biochemical research. Recent improvements to nuclear magnetic resonance (NMR) hardware and methodology allow the measurement of high-resolution heteronuclear multidimensional NMR spectra of macromolecules in living cells (in-cell NMR). In this study, we describe a protocol for the stable isotope ((13)C, (15)N and (2)H) labeling and structure determination of proteins overexpressed in Escherichia coli cells exclusively on the basis of information obtained in living cells. The protocol combines the preparation of the protein in E. coli cells, the rapid measurement of the three-dimensional (3D) NMR spectra by nonlinear sampling of the indirectly acquired dimensions, structure calculation and structure refinement. Under favorable circumstances, this in-cell NMR approach can provide high-resolution 3D structures of proteins in living environments. The protocol has been used to solve the first 3D structure of a protein in living cells for the putative heavy metal-binding protein TTHA1718 from Thermus thermophilus HB8 overexpressed in E. coli cells. As no protein purification is necessary, a sample for in-cell NMR measurements can be obtained within 2-3 d. With the nonlinear sampling scheme, the duration of each 3D experiment can be reduced to 2-3 h. Once chemical shift assignments and NOESY peak lists have been prepared, structure calculation with the program CYANA and energy refinement can be completed in less than 1 h on a powerful computer system.

Effects of recombinant protein expression on green fluorescent protein diffusion in Escherichia coli

Fluorescence recovery after photobleaching was used to measure the diffusion coefficient of green fluorescent protein (GFP, 27 kDa) in Escherichia coli in the presence or absence of four coexpressed proteins: cytoplasmic maltose binding protein (42 kDa), tau-40 (45 kDa), alpha-synuclein (14 kDa), or calmodulin (17 kDa). The GFP diffusion coefficient remains constant regardless of the type of coexpresseed protein and whether or not the coexpressed protein was induced. We conclude that expression of these soluble proteins has little to no effect on the diffusion of GFP. These results have implications for the utility of in-cell nuclear magnetic resonance spectroscopy.

Protein structure determination in living cells by in-cell NMR spectroscopy

Investigating proteins 'at work' in a living environment at atomic resolution is a major goal of molecular biology, which has not been achieved even though methods for the three-dimensional (3D) structure determination of purified proteins in single crystals or in solution are widely used. Recent developments in NMR hardware and methodology have enabled the measurement of high-resolution heteronuclear multi-dimensional NMR spectra of macromolecules in living cells (in-cell NMR). Various intracellular events such as conformational changes, dynamics and binding events have been investigated by this method. However, the low sensitivity and the short lifetime of the samples have so far prevented the acquisition of sufficient structural information to determine protein structures by in-cell NMR. Here we show the first, to our knowledge, 3D protein structure calculated exclusively on the basis of information obtained in living cells. The structure of the putative heavy-metal binding protein TTHA1718 from Thermus thermophilus HB8 overexpressed in Escherichia coli cells was solved by in-cell NMR. Rapid measurement of the 3D NMR spectra by nonlinear sampling of the indirectly acquired dimensions was used to overcome problems caused by the instability and low sensitivity of living E. coli samples. Almost all of the expected backbone NMR resonances and most of the side-chain NMR resonances were observed and assigned, enabling high quality (0.96 ångström backbone root mean squared deviation) structures to be calculated that are very similar to the in vitro structure of TTHA1718 determined independently. The in-cell NMR approach can thus provide accurate high-resolution structures of proteins in living environments.

Subcellular localization and in vivo oxidation-reduction kinetics of thiol peroxidase in Escherichia coli

Peroxiredoxins are a class of peroxide-scavenging enzymes having a conserved cysteine residue(s) in their active centers. Thiol peroxidase (Tpx) is one of the peroxiredoxins identified in Escherichia coli. Despite the absence of the N-terminal signal sequence for transport across the membrane, it has been characterized as a periplasmic protein. Reanalysis of Tpx localization, using active site cysteine mutants of thioredoxin 1 (Trx1), demonstrated that Tpx forms a mixed-disulfide complex with cytoplasmic Trx1, indicating that Tpx localizes in the cytoplasm.

Characterizing the dynamic nature of the Yersinia pestis periplasmic proteome in response to nutrient exhaustion and temperature change

The periplasmic proteome of Yersinia pestis strain KIM6+ was characterized using differential 2-DE display of proteins isolated from several subcellular fractions. Circa 160 proteins were designated as periplasmic, including 62 (putative) solute-binding proteins of ATP-binding cassette (ABC) transporters (SBPs) and 46 (putative) metabolic enzymes. More than 30 SBPs were significantly increased in abundance during stationary phase cell growth, compared to the exponential phase. The data suggest that nutrient exhaustion in the stationary phase triggers cellular responses resulting in the induced expression of numerous ABC transporters, which are responsible for the import of solutes/nutrients. Limited availability of inorganic phosphate (P(i)) also caused dramatic proteomic changes. Nine proteins were functionally linked to the mobilization and import of three small molecules (P(i), phosphonate and glycerol-3-phosphate) and accounted for nearly half of the total protein mass in the periplasm of P(i)-starved cells. When cells were grown at 26 degrees C versus 37 degrees C, corresponding to ambient temperatures in the flea vector and mammalian hosts, respectively, several periplasmic proteins with no known roles in the Y. pestis life cycle were strongly altered in abundance. This included a putative nitrate/sulfonate/bicarbonate-specific SBP (Y1004), encoded by the virulence-associated plasmid pMT1 and increased in abundance at 37 degrees C.

Development of cell-free protein synthesis platforms for disulfide bonded proteins

The use of cell-free protein synthesis (CFPS) for recombinant protein production is emerging as an important technology. For example, the openness of the cell-free system allows control of the reaction environment to promote folding of disulfide bonded proteins in a rapid and economically feasible format. These advantages make cell-free protein expression systems particularly well suited for producing patient specific therapeutic vaccines or antidotes in response to threats from natural and man-made biological agents and for pharmaceutical proteins that are difficult to produce in living cells. In this work we assess the versatility of modern cell-free methods, optimize expression and folding parameters, and highlight the importance of rationally designed plasmid templates for producing mammalian secreted proteins, fusion proteins, and antibody fragments in our E. coli-based CFPS system. Two unique CFPS platforms were established by developing standardized extract preparation protocols and generic cell-free reaction conditions. Generic reaction conditions enabled all proteins to express well with the best therapeutic protein yield at 710 microg/mL, an antibody fragment at 230 microg/mL, and a vaccine fusion protein at 300 microg/mL; with the majority correctly folded. Better yields were obtained when cell-free reaction conditions were optimized for each protein. Establishing general CFPS platforms enhances the potential for cell-free protein synthesis to reliably produce complex protein products at low production and capital costs with very rapid process development timelines.

Structure of Bacillus subtilis superoxide dismutase

The sodA gene of Bacillus subtilis was expressed in Escherichia coli, purified and crystallized. The crystal structure of MnSOD was solved by molecular replacement with four dimers per asymmetric unit and refined to an R factor of 21.1% at 1.8 A resolution. The dimer structure is very similar to that of the related enzyme from B. anthracis. Larger structural differences were observed with the human MnSOD, which has one less helix in the helical domain and a longer loop between two beta-strands and also showed differences in three amino acids at the intersubunit interface in the dimer compared with the two bacterial MnSODs. These structural differences can be exploited in the design of drugs that selectively target the Bacillus enzymes.

Translocation of alpha-synuclein expressed in Escherichia coli

alpha-Synuclein is a major component of Lewy bodies in Parkinson's disease. Although no signal sequence is apparent, alpha-synuclein expressed in Escherichia coli is mostly located in the periplasm. The possibilities that alpha-synuclein translocated into the periplasm across the inner membrane by the SecA or the Tat targeting route identified in bacteria and that alpha-synuclein was released through MscL were excluded. The signal recognition particle-dependent pathway is involved in the translocation of alpha-synuclein. The C-terminal 99-to-140 portion of the alpha-synuclein molecule plays a signal-like role for its translocation into the periplasm, cooperating with the central 61-to-95 section. The N-terminal 1-to-60 region is not required for this translocation.

Functional similarities of a thermostable protein-disulfide oxidoreductase identified in the archaeon Pyrococcus horikoshii to bacterial DsbA enzymes

We have isolated and characterized a gene for a putative protein-disulfide oxidoreductase (phdsb) in the archaeon Pyrococcus horikoshii. The open reading frame of phdsb encodes a protein of 170 amino acids with an NH(2)-terminal extension similar to the bacterial signal peptides. The putative mature region of PhDsb includes a sequence motif, Cys-Pro-His-Cys (CPHC), that is conserved in members of the bacterial DsbA family, but otherwise the archaeal and bacterial sequences do not show substantial similarity. A recombinant protein corresponding to the predicted mature form of PhDsb behaved as a monomer and manifested oxidoreductase activities in vitro similar to those of DsbA of Escherichia coli. The catalytic activity of PhDsb was thermostable and was shown by mutation analysis to depend on the NH(2)-terminal cysteine residue of the CPHC motif. Thus, in spite of their low overall sequence similarities, DsbA-like proteins of archaea and bacteria appear to be highly similar in terms of function.

Expression and purification of Pseudomonas aeruginosa SecA N-terminal domain: stimulation of ATPase activity of the SecAL43P mutant protein

Pseudomonas aeruginosa is a ubiquitous Gram-negative bacterium which secretes a wide range of hydrolytic enzymes, toxins, and virulence factors into the extracellular medium. Although P. aeruginosa possesses numerous specific systems for the export of proteins across its double-membrane envelopes, the Sec system is still the major and essential mechanism. However, very little is known about its molecular basis. We constructed, cloned, and expressed the N-terminal 236 amino acids of PaSecA domain (PaSecAN236), and SecAL43P mutants of P. aeruginosa in Escherichia coli BL21.19 (secA(ts)). Here, we describe the purification of PaSecAN236 by using osmotic shock as the first step to efficiently release targeted protein from cells, followed by cation-exchange and size exclusion columns to obtain homogeneous PaSecAN236. The purified PaSecA N-terminal domain was functional in stimulating the ATPase activity of mutant SecAL43P protein of P. aeruginosa.

Osmotic shock: A mechanosensitive channel blocker can prevent release of cytoplasmic but not periplasmic proteins

When over-expressed in the cytoplasm of Escherichia coli, carboxylesterase Est55 of Geobacillus stearothermophilus was found to be released from cells upon osmotic shock. Comparing two osmotic shock protocols showed that release of Est55 was abolished in the absence of mechanosensitive channel MscL by one method but not the other. The discrepancy extended to several previously reported cytoplasmic proteins released by osmotic shock, including: EF-Tu, thioredoxin, and DnaK in E. coli. Stepwise analyses of parameters between these two protocols revealed that the use of mechanical pipetting instead of gentle dilution of cells prior to exposure to hypotonic solution abolished the effect of MscL. Furthermore, while this phenomenon of release of certain cytoplasmic proteins was sustained in all three wild type strains of E. coli, presence of gadolinium was able to serve as an MscL channel blocker and prevented release of Est55 and EF-Tu in the process. An optimized protocol of osmotic shock was developed from this study to provide a more reliable assessment of location of proteins in E. coli. This method allowed release of authentic periplasmic MalE and beta-lactamase proteins comparable to that by EDTA-lysozyme treatment.

MotE serves as a new chaperone specific for the periplasmic motility protein, MotC, in Sinorhizobium meliloti

The flagella of Sinorhizobium meliloti rotate solely clockwise and vary their rotary speed to provoke changes in the swimming path. This mode of motility control has its molecular corollary in two novel motility proteins, MotC and MotD, present in addition to the ubiquitous MotA/MotB energizing proton channel. MotC binds to the periplasmic portion of MotB, whereas MotD interacts with FliM at the cytoplasmic face of the rotor. We report here the assignment and analysis of a fifth motility protein, MotE. Deletion of motE resulted in aggregation and decay of the periplasmic MotC protein and, as a consequence, in paralysis of the cell. The 179-residue MotE protein bears an N-terminal signal peptide and is rapidly secreted to the periplasm, where it forms stable dimers that are linked by a disulphide bridge between the cysteine 53 residues. Both, the monomeric and the dimeric MotE bind to MotC, and dimerization is essential for MotE stability in the periplasm. We conclude that MotE is a periplasmic chaperone specific for MotC being responsible for its proper folding and stability. We also propose that the MotE dimer serves as a shuttle to target MotC to its binding site at MotB.

Engineered DsbC chimeras catalyze both protein oxidation and disulfide-bond isomerization in Escherichia coli: Reconciling two competing pathways

In the Escherichia coli periplasm, the formation of protein disulfide bonds is catalyzed by DsbA and DsbC. DsbA is a monomer that is maintained in a fully oxidized state by the membrane enzyme DsbB, whereas DsbC is a dimer that is kept reduced by a second membrane protein, DsbD. Although the catalytic regions of DsbA and DsbC are composed of structurally homologous thioredoxin motif domains, DsbA serves only as an oxidase in vivo, whereas DsbC catalyzes disulfide reduction and isomerization and also exhibits significant chaperone activity. To reconcile the distinct catalytic activities of DsbC and DsbA, we constructed a series of chimeras comprising of the dimerization domain of DsbC, with or without the adjacent alpha-helical linker region, fused either to the first, second, third, or fifth residue of intact DsbA or to thioredoxin. The chimeras fully substituted for DsbC in disulfide-bond rearrangement and also were able to restore protein oxidation in a dsbA background. Remarkably, the chimeras could serve as a single catalyst for both disulfide-bond formation and rearrangement, thus reconciling the kinetically competing DsbB-DsbA and DsbD-DsbC pathways. This property appeared to depend on the orientation of the DsbA active-site cysteines with respect to the DsbC dimerization domain. In vitro, the chimeras had high chaperone activity and significant reductase activity but only 15-22% of the disulfide-isomerization activity of DsbC, suggesting that rearrangement of nonnative disulfides may be mediated primarily by cycles of random reduction and reoxidation.

SepL, a protein required for enteropathogenic Escherichia coli type III translocation, interacts with secretion component SepD

Enteropathogenic Escherichia coli (EPEC), an important cause of infantile diarrhoea in the developing world, disrupts host cell microvilli, causes actin rearrangements and attaches intimately to the host cell surface. This characteristic phenotype, referred to as the attaching and effacing (A/E) effect, is encoded on a 36 kb pathogenicity island called the locus of enterocyte effacement (LEE). The LEE includes genes involved in type III secretion and translocation, the eae gene encoding an outer membrane adhesin known as intimin, the tir gene for the translocated intimin receptor, a regulator and various genes of unknown function. Among this last group is sepL. To determine the role of SepL in EPEC pathogenesis, we constructed and tested a non-polar sepL mutant. We found that this sepL mutant is deficient for A/E and that it secretes markedly reduced quantities of those proteins involved in translocation (EspA, EspB and EspD), but normal levels of those proteins presumed to be effectors (Tir, EspF and EspG). Despite normal levels of secretion, the mutant strain was unable to translocate EspF and Tir into host cells and formed no EspA filaments. Fractionation studies revealed that SepL is a soluble cytoplasmic protein. Yeast two-hybrid and affinity purification studies indicated that SepL interacts with the LEE-encoded protein SepD. In contrast to SepL, we found that SepD is required for type III secretion of both translocation and effector proteins. Together, these results demonstrate that SepL has a unique role in type III secretion as a functional component of the translocation system that interacts with an essential element of the secretion machinery.

The export of coat protein from enteroaggregative Escherichia coli by a specific ATP-binding cassette transporter system

Enteroaggregative Escherichia coli (EAEC) is an emerging enteric pathogen characterized by aggregative adherence (AA) to cultured human mucosal epithelium cells. We have recently characterized a 10.2-kDa protein, called dispersin, which is exported from the bacteria and which promotes dispersal of EAEC across the intestinal mucosa. Here, we present evidence that dispersin is exported by a putative ABC transporter complex, which is encoded by a genetic locus of the EAEC virulence plasmid pAA2. We demonstrate that the locus comprises a cluster of five genes (designated aat-PABCD), including homologs of an inner-membrane permease (AatP), an ATP-binding cassette protein (AatC) and the outer membrane protein TolC (AatA). We show that, like TolC, AatA localizes to the outer membrane independently of its ABC partner. Dispersin appears to require the Aat complex for outer membrane translocation but not for secretion across the inner membrane. We also show that, like the dispersin gene, transcription of the aat cluster is dependent on AggR, a regulator of virulence genes in EAEC. We propose that the aat cluster encodes a specialized ABC transporter, which plays a role in the pathogenesis of EAEC by transporting dispersin out of the bacterial cell.

Recognition of secretory proteins in Escherichia coli requires signals in addition to the signal sequence and slow folding

BACKGROUND

The Sec-dependent protein export apparatus of Escherichia coli is very efficient at correctly identifying proteins to be exported from the cytoplasm. Even bacterial strains that carry prl mutations, which allow export of signal sequence-defective precursors, accurately differentiate between cytoplasmic and mutant secretory proteins. It was proposed previously that the basis for this precise discrimination is the slow folding rate of secretory proteins, resulting in binding by the secretory chaperone, SecB, and subsequent targeting to translocase. Based on this proposal, we hypothesized that a cytoplasmic protein containing a mutation that slows its rate of folding would be recognized by SecB and therefore targeted to the Sec pathway. In a Prl suppressor strain the mutant protein would be exported to the periplasm due to loss of ability to reject non-secretory proteins from the pathway.

RESULTS

In the current work, we tested this hypothesis using a mutant form of lambda repressor that folds slowly. No export of the mutant protein was observed, even in a prl strain. We then examined binding of the mutant lambda repressor to SecB. We did not observe interaction by either of two assays, indicating that slow folding is not sufficient for SecB binding and targeting to translocase.

CONCLUSIONS

These results strongly suggest that to be targeted to the export pathway, secretory proteins contain signals in addition to the canonical signal sequence and the rate of folding.

BfpU, a soluble protein essential for type IV pilus biogenesis in enteropathogenic Escherichia coli

A cluster of 14 genes located on the large plasmid of enteropathogenic Escherichia coli (EPEC) strains is sufficient to direct the biogenesis of the type IV bundle-forming pilus (BFP) in a recombinant E. coli host. The fifth gene in the cluster, bfpU, encodes a protein that is predicted to be localized to the periplasmic space. To determine whether BfpU is necessary for pilus biogenesis, the authors constructed a non-polar bfpU mutant EPEC strain by allelic exchange. The mutant strain was unable to perform localized adherence and auto-aggregation, two phenotypes associated with BFP expression, and it failed to make BFP. These phenotypes were restored to the bfpU mutant by a plasmid containing bfpU. There was no difference between the wild-type and bfpU mutant strains in their expression or processing of the pre-pilin protein or in their localization of the pilin protein in the inner and outer membranes. Fractionation studies revealed that BfpU is completely soluble and is detected in both the periplasm and the cytoplasm. Thus, BfpU represents a novel protein required for type IV pilus assembly.

Understanding the art of producing protein and nonprotein molecules in Escherichia coli

The high-level production of functional proteins in E. coli is a very extense field of research in biotechnology. A number of important aspects to be considered in the initial design of an expression system and their interplay, were clear years ago. However, in recent times, strategies that go beyond transcription, translation, stability, vector, and strain choice, have been developed; so now expression of active peptides can be viewed as a more integrated process. Coexpression of protein subunits, foldases and chaperones, protein folding, location and purification schemes, metabolic engineering of the cell's central metabolism, and in vitro refolding strategies, are some of the novelties that are now available to aid in the success of an efficient expression system for active heterologous proteins. This review presents a compilation of the basic issues that influence the success in the production of protein and nonprotein products in Escherichia coli, as well as some general strategies designed to facilitate downstream process operations and improve biosynthesis yields.

Type II secretion by Aeromonas salmonicida: evidence for two periplasmic pools of proaerolysin

Aeromonas salmonicida containing the cloned gene for proaerolysin secretes the protein via the type II secretory pathway. Here we show that altering a region near the beginning of aerA led to a dramatic increase in the amount of proaerolysin that was produced and that a large amount of the protein was cell associated. All of the cell-associated protein had crossed the cytoplasmic membrane, because the signal sequence had been removed, and all of it was accessible to processing by trypsin during osmotic shock. Enlargement of the periplasm was observed by electron microscopy in overproducing cells, likely caused by the osmotic effect of the very large concentrations of accumulated proaerolysin. Immunogold electron microscopy localized nearly all of the proaerolysin in the enlarged periplasm; however, only half of the protoxin was released from the cells by osmotic shocking. Cross-linking studies showed that this fraction contained normal dimeric proaerolysin but that proaerolysin in the fraction that was not shockable had not dimerized, although it appeared to be correctly folded. Both periplasmic fractions were secreted by the cells; however, the nonshockable fraction was secreted much more slowly than the shockable fraction. We estimated a rate for maximal secretion of proaerolysin from the bacteria that was much lower than the rates that have been estimated for inner membrane transit, which suggests that transit across the outer membrane is rate limiting and may account for the periplasmic accumulation of the protein. Finally, we show that overproduction of proaerolysin inhibited the release of the protease that is secreted by A. salmonicida.

Cosecretion of chaperones and low-molecular-size medium additives increases the yield of recombinant disulfide-bridged proteins

Attempts were made to engineer the periplasm of Escherichia coli to an expression compartment of heterologous proteins in their native conformation. As a first approach the low-molecular-size additive L-arginine and the redox compound glutathione (GSH) were added to the culture medium. Addition of 0.4 M L-arginine and 5 mM reduced GSH increased the yield of a native tissue-type plasminogen activator variant (rPA), consisting of the kringle-2 and the protease domain, and a single-chain antibody fragment (scFv) up to 10- and 37-fold, respectively. A variety of other medium additives also had positive effects on the yield of rPA. In a second set of experiments, the effects of cosecreted ATP-independent molecular chaperones on the yields of native therapeutic proteins were investigated. At optimized conditions, cosecretion of E. coli DnaJ or murine Hsp25 increased the yield of native rPA by a factor of 170 and 125, respectively. Cosecretion of DnaJ also dramatically increased the amount of a second model protein, native proinsulin, in the periplasm. The results of this study are anticipated to initiate a series of new approaches to increase the yields of native, disulfide-bridged, recombinant proteins in the periplasm of E. coli.

Crystal structures of YBHB and YBCL from Escherichia coli, two bacterial homologues to a Raf kinase inhibitor protein

In rat and human cells, RKIP (previously known as PEBP) was characterized as an inhibitor of the MEK phosphorylation by Raf-1. In Escherichia coli, the genes ybhb and ybcl possibly encode two RKIP homologues while in the genomes of other bacteria and archaebacteria other homologous genes of RKIP have been found. The parallel between the cellular signaling mechanisms in eukaryotes and prokaryotes suggests that these bacterial proteins could be involved in the regulation of protein phosphorylation by kinases as well. We first showed that the proteins YBHB and YBCL were present in the cytoplasm and periplasm of E. coli, respectively, after which we determined their crystallographic structures. These structures verify that YBHB and YBCL belong to the same structural family as mammalian RKIP/PEBP proteins. The general fold and the anion binding site of these proteins are extremely well conserved between mammals and bacteria and suggest functional similarities. However, the bacterial proteins also exhibit some specific structural features, like a substrate binding pocket formed by the dimerization interface and the absence of cis peptide bonds. This structural variety should correspond to the recognition of multiple cellular partners.

Investigation of Escherichia coli dimethyl sulfoxide reductase assembly and processing in strains defective for the sec-independent protein translocation system membrane targeting and translocation

Dimethyl sulfoxide reductase is a heterotrimeric enzyme (DmsABC) localized to the cytoplasmic surface of the inner membrane. Targeting of the DmsA and DmsB catalytic subunits to the membrane requires the membrane targeting and translocation (Mtt) system. The DmsAB dimer is a member of a family of extrinsic, cytoplasmic facing membrane subunits that require Mtt in order to assemble on the membrane. We show that the MttA(2), MttB, and presumably MttA(1) but not the MttC proteins are required for targeting DmsAB to the membrane. Unlike other Mtt substrates such as trimethylamine N-oxide reductase, the soluble cytoplasmic DmsAB dimer that accumulates in the mtt deletions is very labile. Deletion of the mttA(2) or mttB genes also prevents anaerobic growth on fumarate even though fumarate reductase does not require Mtt for assembly. This was due to the lethality of membrane insertion of DmsC in the absence of the DmsAB subunits. In the absence of DmsC, DmsAB accumulates in the cytoplasm. A 45-amino acid leader on DmsA is removed during assembly. Processing does not require DmsC but does require Mtt. Translocation of DmsAB to the periplasm is not required for processing. The leader may be cleaved by a novel leader peptidase, or the long DmsA leader may traverse the membrane through the Mtt system resulting in cleavage by the periplasmic leader peptidase I followed by release of DmsA into the cytoplasm.

Molecular sieve mechanism of selective release of cytoplasmic proteins by osmotically shocked Escherichia coli

Escherichia coli cells, the outer membrane of which is permeabilized with EDTA, release a specific subset of cytoplasmic proteins upon a sudden drop in osmolarity in the surrounding medium. This subset includes EF-Tu, thioredoxin, and DnaK among other proteins, and comprises approximately 10% of the total bacterial protein content. As we demonstrate here, the same proteins are released from electroporated E. coli cells pretreated with EDTA. Although known for several decades, the phenomenon of selective release of proteins has received no satisfactory explanation. Here we show that the subset of released proteins is almost identical to the subset of proteins that are able to pass through a 100-kDa-cutoff cellulose membrane upon molecular filtration of an E. coli homogenate. This finding indicates that in osmotically shocked or electroporated bacteria, proteins are strained through a molecular sieve formed by the transiently damaged bacterial envelope. As a result, proteins of small native sizes are selectively released, whereas large proteins and large protein complexes are retained by bacterial cells.

Secretion of recombinant proteins via the chaperone/usher pathway in Escherichia coli

F1 antigen (Caf1) of Yersinia pestis is assembled via the Caf1M chaperone/Caf1A usher pathway. We investigated the ability of this assembly system to facilitate secretion of full-length heterologous proteins fused to the Caf1 subunit in Escherichia coli. Despite correct processing of a chimeric protein composed of a modified Caf1 signal peptide, mature human interleukin-1beta (hIL-1beta), and mature Caf1, the processed product (hIL-1beta:Caf1) remained insoluble. Coexpression of this chimera with a functional Caf1M chaperone led to the accumulation of soluble hIL-1beta:Caf1 in the periplasm. Soluble hIL-1beta:Caf1 reacted with monoclonal antibodies directed against structural epitopes of hIL-1beta. The results indicate that Caf1M-induced release of hIL-1beta:Caf1 from the inner membrane promotes folding of the hIL-1beta domain. Similar results were obtained with the fusion of Caf1 to hIL-1beta receptor antagonist or to human granulocyte-macrophage colony-stimulating factor. Following coexpression of the hIL-1beta:Caf1 precursor with both the Caf1M chaperone and Caf1A outer membrane protein, hIL-1beta:Caf1 could be detected on the cell surface of E. coli. These results demonstrate for the first time the potential application of the chaperone/usher secretion pathway in the transport of subunits with large heterogeneous N-terminal fusions. This represents a novel means for the delivery of correctly folded heterologous proteins to the periplasm and cell surface as either polymers or cleavable monomeric domains.

Disulfide-dependent folding and export of Escherichia coli DsbC

DsbC, a member of the Dsb family in the periplasm of Gram-negative bacteria, is not only a disulfide isomerase but also a chaperone. Five DsbC mutants with Cys in the active site sequence of Cys(98)-Gly-Tyr-Cys(101) and the nonactive site disulfide Cys(141)-Cys(163) replaced by Ser have been studied. The results show that the active site Cys residues are necessary for enzyme activities but not required for chaperone activity, while the lack of the nonactive site disulfide results in a decreased chaperone activity in assisting the reactivation of denatured d-glyceraldehyde-3-phosphate dehydrogenase but has no effect on enzyme activities. Wild-type DsbC was overexpressed and correctly processed as a soluble periplasmic protein. Mutation in one of these Cys residues results in aggregation or extracellular/membrane locations, but does not affect the proper processing. DsbC mutated in either Cys residue of nonactive site disulfide shows higher sensitivity to unfolding by guanidine hydrochloride and slower refolding compared with wild-type DsbC and the active site Cys mutants. The above results provide experimental evidence for structural role of the nonactive site disulfide in folding and biological activities of DsbC.

An efficient cell-free protein synthesis system using periplasmic phosphatase-removed S30 extract

An efficient cell-free translation system was developed by removal of phosphatase localized in the periplasmic space, which hampers the translation reaction by hydrolyzing ATP. S30 extract was prepared from the spheroplast of Escherichia coli, and as much as 40% of ATP-hydrolysis activity of phosphatases could be easily removed by the spheroplast formation. The reaction period of translation using phosphatase-removed S30 extract could be prolonged and protein synthesis was enhanced by more than 30%.

Export and folding of signal-sequenceless Bacillus licheniformis beta-lactamase in Escherichia coli

Two genetically engineered variants of the Bacillus licheniformis beta-lactamase gene were expressed in Escherichia coli. One variant coded for the exo-small mature enzyme without the signal peptide. The other coded for the exo-large mature enzyme preceded by 10, mostly polar, residues from an incomplete heterologous signal. As observed following the extraction by a lysozyme-EDTA treatment, the signal-less variant was exported to the periplasm with nearly 20% efficiency, whereas the variant with the N-terminal extension was translocated to a lesser degree; interestingly, nearly all of the former and half of the latter were extracted by osmotic shock, which may be of importance for our understanding of cellular compartments. The fact that a signal-less protein is translocated with substantial yields raises questions about the essential role of signal peptides for protein export. As folding and export are related processes, we investigated the folding in vitro of the two variants. No differences were found between them. In the absence of denaturant, they are completely folded, fully active and have a large DeltaG of unfolding. Under partially denaturing conditions they populate several partially folded states. The absence of significant amounts of a non-native state under native conditions makes a thermodynamic partitioning between folding and export less likely. In addition, kinetic measurements indicated that these B. licheniformis lactamases fold much faster than E. coli beta-lactamase. This behavior suggests that they are exported by a kinetically controlled process, mediated by one or more still unidentified interactions that slow folding and allow a folding intermediate to enter the export pathway.

Characterization of a 12-kilodalton rhodanese encoded by glpE of Escherichia coli and its interaction with thioredoxin

Rhodaneses catalyze the transfer of the sulfane sulfur from thiosulfate or thiosulfonates to thiophilic acceptors such as cyanide and dithiols. In this work, we define for the first time the gene, and hence the amino acid sequence, of a 12-kDa rhodanese from Escherichia coli. Well-characterized rhodaneses are comprised of two structurally similar ca. 15-kDa domains. Hence, it is thought that duplication of an ancestral rhodanese gene gave rise to the genes that encode the two-domain rhodaneses. The glpE gene, a member of the sn-glycerol 3-phosphate (glp) regulon of E. coli, encodes the 12-kDa rhodanese. As for other characterized rhodaneses, kinetic analysis revealed that catalysis by purified GlpE occurs by way of an enzyme-sulfur intermediate utilizing a double-displacement mechanism requiring an active-site cysteine. The K(m)s for SSO(3)(2-) and CN(-) were 78 and 17 mM, respectively. The apparent molecular mass of GlpE under nondenaturing conditions was 22.5 kDa, indicating that GlpE functions as a dimer. GlpE exhibited a k(cat) of 230 s(-1). Thioredoxin 1 from E. coli, a small multifunctional dithiol protein, served as a sulfur acceptor substrate for GlpE with an apparent K(m) of 34 microM when thiosulfate was near its K(m), suggesting that thioredoxin 1 or related dithiol proteins could be physiological substrates for sulfurtransferases. The overall degree of amino acid sequence identity between GlpE and the active-site domain of mammalian rhodaneses is limited ( approximately 17%). This work is significant because it begins to reveal the variation in amino acid sequences present in the sulfurtransferases. GlpE is the first among the 41 proteins in COG0607 (rhodanese-related sulfurtransferases) of the database Clusters of Orthologous Groups of proteins (http://www.ncbi.nlm.nih.gov/COG/) for which sulfurtransferase activity has been confirmed.

Membrane association of the Escherichia coli enterobactin synthase proteins EntB/G, EntE, and EntF

The cytosolic proteins EntE, EntF, and EntB/G, which are Escherichia coli enzymes necessary for the final stage of enterobactin synthesis, are released by osmotic shock. Here, consistent with the idea that cytoplasmic proteins found in shockates have an affinity for membranes, a small fraction of each was found in membrane preparations. Two procedures demonstrated that the enzymes were enriched in a minor membrane fraction of buoyant density intermediate between that of cytoplasmic and outer membranes, providing indirect support for the notion that these proteins have a role in enterobactin excretion as well as synthesis.

A periplasmic location is essential for the role of the ApbE lipoprotein in thiamine synthesis in Salmonella typhimurium

ApbE is a lipoprotein in Salmonella typhimurium, and mutants unable to make this protein have a reduced ability to make thiamine (vitamin B(1)) and require it as a supplement for optimal growth in minimal glucose medium. Polyclonal antibodies specific to ApbE were used to determine that wild-type ApbE is located exclusively in the inner membrane. The periplasmic, monotopic topology of ApbE was determined by using computer-based hydrophobicity plots, LacZ and PhoA gene fusions, and proteinase protection experiments. This extracellular location of ApbE is required for its function, since a cytoplasmic form (ApbE(cyto)) did not allow an apbE mutant to grow in the absence of thiamine. A periplasmic form of ApbE (ApbE(peri)) lacking the lipoprotein modification allowed an apbE mutant to grow in the absence of thiamine, indicating that soluble ApbE could function in thiamine synthesis and that lipoation and membrane association were not required. Alteration of the amino acid implicated in membrane sorting for other lipoproteins did not result in a relocalization of ApbE to the outer membrane, suggesting that additional sorting determinants exist for ApbE.

TraC of IncN plasmid pKM101 associates with membranes and extracellular high-molecular-weight structures in Escherichia coli

Conjugative transfer of IncN plasmid pKM101 is mediated by the TraI-TraII region-encoded transfer machinery components. Similar to the case for the related Agrobacterium tumefaciens T-complex transfer apparatus, this machinery is needed for assembly of pili to initiate cell-to-cell contact preceding DNA transfer. Biochemical and cell biological experiments presented here show extracellular localization of TraC, as suggested by extracellular complementation of TraC-deficient bacteria by helper cells expressing a functional plasmid transfer machinery (S. C. Winans, and G. C. Walker, J. Bacteriol. 161:402-410, 1985). Overexpression of TraC and its export in large amounts into the periplasm of Escherichia coli allowed purification by periplasmic extraction, ammonium sulfate precipitation, and column chromatography. Whereas TraC was soluble in overexpressing strains, it partly associated with the membranes in pKM101-carrying cells, possibly due to protein-protein interactions with other components of the TraI-TraII region-encoded transfer machinery. Membrane association of TraC was reduced in strains carrying pKM101 derivatives with transposon insertions in genes coding for other essential components of the transfer machinery, traM, traB, traD, and traE but not eex, coding for an entry exclusion protein not required for DNA transfer. Cross-linking identified protein-protein interactions of TraC in E. coli carrying pKM101 but not derivatives with transposon insertions in essential tra genes. Interactions with membrane-bound Tra proteins may incorporate TraC into a surface structure, suggested by its removal from the cell by shearing as part of a high-molecular-weight complex. Heterologous expression of TraC in A. tumefaciens partly compensated for the pilus assembly defect in strains deficient for its homolog VirB5, which further supported its role in assembly of conjugative pili. In addition to its association with high-molecular-weight structures, TraC was secreted into the extracellular milieu. Conjugation experiments showed that secreted TraC does not compensate transfer deficiency of TraC-deficient cells, suggesting that extracellular complementation may rely on cell-to-cell transfer of TraC only as part of a bona fide transfer apparatus.

The unipolar Shigella surface protein IcsA is targeted directly to the bacterial old pole: IcsP cleavage of IcsA occurs over the entire bacterial surface

Shigella flexneri is an intracellular pathogen that is able to move within the cytoplasm of infected cells by the continual assembly of actin onto one pole of the bacterium. IcsA, an outer membrane protein, is localized to the old pole of the bacterium and is both necessary and sufficient for actin assembly. IcsA is slowly cleaved from the bacterial surface by the protease IcsP (SopA). Absence of IcsP leads to an alteration in the distribution of surface IcsA, such that the polar cap is maintained and some IcsA is distributed along the lateral walls of the bacillus. The mechanism of unipolar localization of IcsA and the role of IcsP in its unipolar localization are incompletely understood. Here, we demonstrate that cleavage of IcsA occurs exclusively in the outer membrane and that IcsP is localized to the outer membrane. In addition, we show that IcsA at the old pole is susceptible to cleavage by IcsP and that native IcsP is active at the pole. Taken together, these data indicate that IcsP cleaves IcsA over the entire bacterial surface. Finally, we show that, immediately after induction from a tightly regulated promoter, IcsA is expressed exclusively at the old pole in both the icsP- icsA- and the icsA- background. These data demonstrate that unipolar localization of IcsA results from its direct targeting to the pole, followed by its diffusion laterally in the outer membrane.

In vivo and in vitro function of the Escherichia coli periplasmic cysteine oxidoreductase DsbG

We have characterized in vivo and in vitro the recently identified DsbG from Escherichia coli. In addition to sharing sequence homology with the thiol disulfide exchange protein DsbC, DsbG likewise was shown to form a stable periplasmic dimer, and it displays an equilibrium constant with glutathione comparable with DsbA and DsbC. DsbG was found to be expressed at approximately 25% the level of DsbC. In contrast to earlier results (Andersen, C. L., Matthey-Dupraz, A., Missiakas, D., and Raina, S. (1997) Mol. Microbiol. 26, 121-132), we showed that dsbG is not essential for growth and that dsbG null mutants display no defect in folding of multiple disulfide-containing heterologous proteins. Overexpression of DsbG, however, was able to restore the ability of dsbC mutants to express heterologous multidisulfide proteins, namely bovine pancreatic trypsin inhibitor, a protein with three disulfides, and to a lesser extent, mouse urokinase (12 disulfides). As in DsbC, the putative active site thiols in DsbG are completely reduced in vivo in a dsbD-dependent fashion, as would be expected if DsbG is acting as a disulfide isomerase or reductase. However, the latter is not likely because DsbG could not catalyze insulin reduction in vitro. Overall, our results indicate that DsbG functions primarily as a periplasmic disulfide isomerase with a narrower substrate specificity than DsbC.

Chaperone activity with a redox switch

Hsp33, a member of a newly discovered heat shock protein family, was found to be a very potent molecular chaperone. Hsp33 is distinguished from all other known molecular chaperones by its mode of functional regulation. Its activity is redox regulated. Hsp33 is a cytoplasmically localized protein with highly reactive cysteines that respond quickly to changes in the redox environment. Oxidizing conditions like H2O2 cause disulfide bonds to form in Hsp33, a process that leads to the activation of its chaperone function. In vitro and in vivo experiments suggest that Hsp33 protects cells from oxidants, leading us to conclude that we have found a protein family that plays an important role in the bacterial defense system toward oxidative stress.

High-level expression of eukaryotic polypeptides from bacterial chromosomes

Attractive economics and short development timelines have often been cited as reasons for using bacteria to express eukaryotic proteins on a commercial scale. Nevertheless, routine techniques for bacterial expression of heterologous proteins are beset by a variety of technical and legal difficulties. In particular, the use of plasmids to express foreign proteins, popular promoter systems, protein fusion partners, and histidine tags and the recovery of proteins from inclusion bodies are affected by a host of issued patents. Chromosomally encoded leaderless fusions (CELF) offer a variety of technical and legal advantages over existing bacterial expression systems. In this study, we show that CELF can be used to produce a wide assortment of eukaryotic proteins at 10-liter fermentation scale.

Characterization of dacC, which encodes a new low-molecular-weight penicillin-binding protein in Bacillus subtilis

The pbp gene (renamed dacC), identified by the Bacillus subtilis genome sequencing project, encodes a putative 491-residue protein with sequence homology to low-molecular-weight penicillin-binding proteins. Use of a transcriptional dacC-lacZ fusion revealed that dacC expression (i) is initiated at the end of stationary phase; (ii) depends strongly on transcription factor sigmaH; and (iii) appears to be initiated from a promoter located immediately upstream of yoxA, a gene of unknown function located upstream of dacC on the B. subtilis chromosome. A B. subtilis dacC insertional mutant grew and sporulated identically to wild-type cells, and dacC and wild-type spores had the same heat resistance, cortex structure, and germination and outgrowth kinetics. Expression of dacC in Escherichia coli showed that this gene encodes an approximately 59-kDa membrane-associated penicillin-binding protein which is highly toxic when overexpressed.

Evidence that a globular conformation is not compatible with FhaC-mediated secretion of the Bordetella pertussis filamentous haemagglutinin

The 220 kDa Bordetella pertussis filamentous haemagglutinin (FHA) is the major extracellular protein of this organism. It is exported using a signal peptide-dependent pathway, and its secretion depends on one specific outer membrane accessory protein, FhaC. In this work, we have investigated the influence of conformation on the FhaC-mediated secretion of FHA using an 80kDa N-terminal FHA derivative, Fha44. In contrast to many signal peptide-dependent secretory proteins, no soluble periplasmic intermediate of Fha44 could be isolated. In addition, cell-associated Fha44 synthesized in the absence of FhaC did not remain competent for extracellular secretion upon delayed expression of FhaC, indicating that the translocation steps across the cytoplasmic and the outer membrane might be coupled. A chimeric protein, in which the globular B subunit of the cholera toxin, CtxB, was fused at the C-terminus of Fha44, was not secreted in B. pertussis or in Escherichia coli expressing FhaC. The hybrid protein was only secreted when both disulphide bond-forming cysteines of CtxB were replaced by serines or when it was produced in DsbA- E. coli. The Fha44 portion of the secretion-incompetent hybrid protein was partly exposed on the cell surface. These results argue that the Fha44-CtxB hybrid protein transited through the periplasmic space, where disulphide bond formation is specifically catalysed, and that secretion across the outer membrane was initiated. The folded CtxB portion prevented extracellular release of the hybrid, in contrast to the more flexible CtxB domain devoid of cysteines. We propose a secretion model whereby Fha44 transits through the periplasmic space on its way to the cell surface and initiates its translocation through the outer membrane before being released from the cytoplasmic membrane. Coupling of Fha44 translocation across both membranes would delay the acquisition of its folded structure until the protein emerges from the outer membrane. Such a model would be consistent with the extensive intracellular proteolysis of FHA derivatives in B. pertussis.

Expression of eukaryotic proteins in soluble form in Escherichia coli

At the optimum temperature for its growth (37 degrees C), Escherichia coli tends to accumulate heterologous proteins in insoluble form. Fusion protein technology has been used to increase the solubility of overexpressed proteins in this organism, but with variable degrees of success. Fusion to a mutant form of DsbA (DsbAmut) confers higher levels of solubility to heterologous proteins in a reproducible way, even when E. coli is grown at 37 degrees C. We have shown this to be true with a diverse sample of eukaryotic proteins: IGF-I, IGFBP-3, 3C proteinase, TGF beta-2, sTGF beta-RII, BDNF, GDNF, mEGFBP, leptin, and GFP. In addition, we have investigated the effects of charge average and proline content on the solubility of DsbAmut fusions. Coexpression of a protein prolyl isomerase [cyclophilin (L-)] and modification of selected asparagine residues to aspartic acid appear to have beneficial effects on the accumulation of soluble heterologous proteins.