Sporadic distribution of tRNA(Arg)CCU introns among alpha-purple bacteria: evidence for horizontal transmission and transposition of a group I intron

Novel small RNAs expressed by Bartonella bacilliformis under multiple conditions reveal potential mechanisms for persistence in the sand fly vector and human host

Bartonella bacilliformis, the etiological agent of Carrión’s disease, is a Gram-negative, facultative intracellular alphaproteobacterium. Carrión’s disease is an emerging but neglected tropical illness endemic to Peru, Colombia, and Ecuador. B. bacilliformis is spread between humans through the bite of female phlebotomine sand flies. As a result, the pathogen encounters significant and repeated environmental shifts during its life cycle, including changes in pH and temperature. In most bacteria, small non-coding RNAs (sRNAs) serve as effectors that may post-transcriptionally regulate the stress response to such changes. However, sRNAs have not been characterized in B. bacilliformis, to date. We therefore performed total RNA-sequencing analyses on B. bacilliformis grown in vitro then shifted to one of ten distinct conditions that simulate various environments encountered by the pathogen during its life cycle. From this, we identified 160 sRNAs significantly expressed under at least one of the conditions tested. sRNAs included the highly-conserved tmRNA, 6S RNA, RNase P RNA component, SRP RNA component, ffH leader RNA, and the alphaproteobacterial sRNAs αr45 and speF leader RNA. In addition, 153 other potential sRNAs of unknown function were discovered. Northern blot analysis was used to confirm the expression of eight novel sRNAs. We also characterized a Bartonellabacilliformisgroup I intron (BbgpI) that disrupts an un-annotated tRNA_CCU^Arg gene and determined that the intron splices in vivo and self-splices in vitro. Furthermore, we demonstrated the molecular targeting of Bartonellabacilliformissmall RNA 9 (BbsR9) to transcripts of the ftsH, nuoF, and gcvT genes, in vitro.

B. bacilliformis is a bacterial pathogen that is transmitted between humans by phlebotomine sand flies. Bacteria often express sRNAs to fine-tune the production of proteins involved in a wide array of biological processes. We cultured B. bacilliformis in vitro under standard conditions then shifted the pathogen for a period of time to ten distinct environments, including multiple temperatures, pH levels, and infections of human blood and human vascular endothelial cells. After RNA-sequencing, a manual transcriptome search identified 160 putative sRNAs, including seven highly-conserved sRNAs and 153 novel potential sRNAs. We then characterized two of the novel sRNAs, BbgpI and BbsR9. BbgpI is a group I intron (ribozyme) that self-splices and disrupts an unannotated gene coding for a transfer RNA (tRNA_CCU^Arg). BbsR9 is an intergenic sRNA expressed under conditions that simulate the sand fly. We found that BbsR9 targets transcripts of the ftsH, nuoF, and gcvT genes. Furthermore, we determined the specific sRNA-mRNA interactions responsible for BbsR9 binding to its target mRNAs through in vitro mutagenesis and binding assays.

Co-evolution with recombination affects the stability of mobile genetic element insertions within gene families of Salmonella

Bacteria can have multiple copies of a gene at separate locations on the same chromosome. Some of these gene families, including tuf (translation elongation factor EF-Tu) and rrl (ribosomal RNA), encode functions critically important for bacterial fitness. Genes within these families are known to evolve in concert using homologous recombination to transfer genetic information from one gene to another. This mechanism can counteract the detrimental effects of nucleotide sequence divergence over time. Whether such mechanisms can also protect against the potentially lethal effects of mobile genetic element insertion is not well understood. To address this we constructed two different length insertion cassettes to mimic mobile genetic elements and inserted these into various positions of the tuf and rrl genes. We measured rates of recombinational repair that removed the inserted cassette and studied the underlying mechanism. Our results indicate that homologous recombination can protect the tuf and rrl genes from inactivation by mobile genetic elements, but for insertions within shorter gene sequences the efficiency of repair is very low. Intriguingly, we found that physical distance separating genes on the chromosome directly affects the rate of recombinational repair suggesting that relative location will influence the ability of homologous recombination to maintain homogeneity.

Mobile elements in a single-filament orange Guaymas Basin Beggiatoa ("Candidatus Maribeggiatoa") sp. draft genome: evidence for genetic exchange with cyanobacteria

The draft genome sequence of a single orange Beggiatoa ("Candidatus Maribeggiatoa") filament collected from a microbial mat at a hydrothermal site in Guaymas Basin (Gulf of California, Mexico) shows evidence of extensive genetic exchange with cyanobacteria, in particular for sensory and signal transduction genes. A putative homing endonuclease gene and group I intron within the 23S rRNA gene; several group II catalytic introns; GyrB and DnaE inteins, also encoding homing endonucleases; multiple copies of sequences similar to the fdxN excision elements XisH and XisI (required for heterocyst differentiation in some cyanobacteria); and multiple sequences related to an open reading frame (ORF) (00024_0693) of unknown function all have close non-Beggiatoaceae matches with cyanobacterial sequences. Sequences similar to the uncharacterized ORF and Xis elements are found in other Beggiatoaceae genomes, a variety of cyanobacteria, and a few phylogenetically dispersed pleiomorphic or filamentous bacteria. We speculate that elements shared among filamentous bacterial species may have been exchanged in microbial mats and that some of them may be involved in cell differentiation.

Survey of group I and group II introns in 29 sequenced genomes of the Bacillus cereus group: insights into their spread and evolution

Group I and group II introns are different catalytic self-splicing and mobile RNA elements that contribute to genome dynamics. In this study, we have analyzed their distribution and evolution in 29 sequenced genomes from the Bacillus cereus group of bacteria. Introns were of different structural classes and evolutionary origins, and a large number of nearly identical elements are shared between multiple strains of different sources, suggesting recent lateral transfers and/or that introns are under a strong selection pressure. Altogether, 73 group I introns were identified, inserted in essential genes from the chromosome or newly described prophages, including the first elements found within phages in bacterial plasmids. Notably, bacteriophages are an important source for spreading group I introns between strains. Furthermore, 77 group II introns were found within a diverse set of chromosomal and plasmidic genes. Unusual findings include elements located within conserved DNA metabolism and repair genes and one intron inserted within a novel retroelement. Group II introns are mainly disseminated via plasmids and can subsequently invade the host genome, in particular by coupling mobility with host cell replication. This study reveals a very high diversity and variability of mobile introns in B. cereus group strains.

Complete genomic sequence of bacteriophage phiEcoM-GJ1, a novel phage that has myovirus morphology and a podovirus-like RNA polymerase

The complete genome of phiEcoM-GJ1, a lytic phage that attacks porcine enterotoxigenic Escherichia coli of serotype O149:H10:F4, was sequenced and analyzed. The morphology of the phage and the identity of the structural proteins were also determined. The genome consisted of 52,975 bp with a G+C content of 44% and was terminally redundant and circularly permuted. Seventy-five potential open reading frames (ORFs) were identified and annotated, but only 29 possessed homologs. The proteins of five ORFs showed homology with proteins of phages of the family Myoviridae, nine with proteins of phages of the family Podoviridae, and six with proteins of phages of the family Siphoviridae. ORF 1 encoded a T7-like single-subunit RNA polymerase and was preceded by a putative E. coli sigma(70)-like promoter. Nine putative phage promoters were detected throughout the genome. The genome included a tRNA gene of 95 bp that had a putative 18-bp intron. The phage morphology was typical of phages of the family Myoviridae, with an icosahedral head, a neck, and a long contractile tail with tail fibers. The analysis shows that phiEcoM-GJ1 is unique, having the morphology of the Myoviridae, a gene for RNA polymerase, which is characteristic of phages of the T7 group of the Podoviridae, and several genes that encode proteins with homology to proteins of phages of the family Siphoviridae.

DiGIR1 and NaGIR1: naturally occurring group I-like ribozymes with unique core organization and evolved biological role

The group I-like ribozyme GIR1 is a unique example of a naturally occurring ribozyme with an evolved biological function. GIR1 generates the 5'-end of a nucleolar encoded messenger RNA involved in intron mobility. GIR1 is found as a cis-cleaving ribozyme within two very different rDNA group I introns (twin-ribozyme introns) in distantly related organisms. The Didymium GIR1 (DiGIR1) and Naegleria GIR1 (NaGIR1) share fundamental features in structural organization and reactivity, and display significant differences when compared to the related group I splicing ribozymes. GIR1 lacks the characteristic P1 segment present in all group I splicing ribozymes, it has a novel core organization, and it catalyses two site-specific hydrolytic cleavages rather than splicing. DiGIR1 and NaGIR1 appear to have originated from eubacterial group I introns in order to fulfil a common biological challenge: the expression of a protein encoding gene in a nucleolar context.

The cyanobacterial tRNA(Leu) (UAA) intron: evolutionary patterns in a genetic marker

Cyanobacterial tRNA(Leu) (UAA) intron sequences from natural populations of Nostoc and other cyanobacteria were compared. Variation between the different introns was not randomly distributed but strongly restricted by the secondary and tertiary structure of the intron. Although all Nostoc sequences examined shared high similarity, differences were observed in one stem-loop. This stem-loop could be divided into two classes, both built up from two base pairing heptanucleotide repeats. Size variation was primarily caused by different numbers of repeats, but some strains also contained additional sequences in this stem-loop not following the heptanucleotide repeat motif. Several sequences showing similarity with these additional sequences were identified in the Nostoc punctiforme genome. Furthermore, the regions flanking these sequences contained the same, or similar, heptanucleotide repeats as those flanking the corresponding sequences in the intron. It is proposed that both slipped strand mispairing during replication and homologous recombination among different loci in the genome are important processes causing variation between introns.

Novel group I intron in the tRNA(Leu)(UAA) gene of a gamma-proteobacterium isolated from a deep subsurface environment

A group I intron has been found to interrupt the anticodon loop of the tRNA(Leu)(UAA) gene in a bacterium belonging to the gamma-subdivision of Proteobacteria and isolated from a deep subsurface environment. The subsurface isolate SMCC D0715 was identified as belonging to the genus Pseudomonas. The group I intron from this isolate is the first to be reported for gamma-proteobacteria, and the first instance of a tRNA(Leu)(UAA) group I intron to be found in a group of bacteria other than cyanobacteria. The 231-nucleotide (nt) intron's sequence has group I conserved elements and folds into a bona fide group I secondary structure with canonical base-paired segments P1 to P9 and a paired region, P10. The D0715 intron possesses the 11-nt motif CCUACG. UAUGG in its P8 region, a feature not common in bacterial introns. To date, phylogenetic analysis has shown that bacterial introns form two distinct families, and their complex distribution suggests that both lateral transfer and common ancestry have taken part in the evolutionary history of these elements.

A novel group I intron-encoded endonuclease specific for the anticodon region of tRNA(fMet) genes

Open reading frames (ORFs) are frequently inserted into group I self-splicing introns. These ORFs encode either maturases that are required for splicing of the intron or DNA endonucleases that promote intron mobility. A self-splicing intron in the tRNA(fMet) gene of Synechocystis PCC 6803, which has been proposed to have moved laterally within the cyanobacteria, contains an ORF that is unrelated to known intron-encoded endonucleases or maturases. Here, using an in vitro transcription-translation system, we show that this intronic ORF encodes a double-strand DNA endonuclease, I-Ssp6803I. I-Ssp6803I cleaves each strand of the intronless tRNA(fMet) gene adjacent to the anticodon triplet leaving 3 bp 3' extensions and has no activity at intron-exon boundaries. Using an in vitro cleavage assay and scanning deletion mutants of the intronless target site, the minimal recognition site was determined to be a partially palindromic 20 bp region encompassing the entire anticodon stem and loop of the tRNA(fMet) gene. I-Ssp6803I represents a novel intron-encoded DNA endonuclease and is the first example of a chromosomally encoded group I intron endonuclease in bacteria.

Structure-function relationships of two closely related group IC3 intron ribozymes from Azoarcus and Synechococcus pre-tRNA

The two group IC3 pre-tRNA introns from Azoarcus and Synechococcus share very analogous secondary structures. They are small group I ribozymes that possess only two peripheral domains, P2 and P9. However, the 3'-splice site hydrolysis activity of the Synechococcus ribozyme critically depends on P2 whereas that of Azoarcus does not, indicating that the structure-function relationships of the two ribozymes are strikingly different despite their structural resemblance. To identify the element(s) that determines the catalytic properties of these ribozymes, we undertook analyses of chimeric ribozymes prepared by swapping their structural elements. We found that the difference can be attributed to a small number of nucleotides within the conserved core region. Further analysis by employing in vitro selection revealed that a base triple interaction (P4bp3 x J6/7-2) is a critical element for determining activity and suggests the existence of a novel base quintuple involving the base triple P4bp5 x J8/7-5.