A four-dimensional view of assembly of a morphogenetic protein during sporulation in Bacillus subtilis

Interaction between membrane curvature sensitive factors SpoVM and SpoIVA in Bicelle condition

SpoVM and SpoIVA are essential proteins for coat assembly in Bacillus subtilis. SpoVM is a membrane curvature sensor, specifically localized on the forespore membrane. SpoIVA is an ATP hydrolase that self-assembles by hydrolyzing ATP. In this work, SpoVM and its mutant SpoVMP9A were obtained by cyanogen bromide cleavage and reconstituted into bicelles. The purification of SpoIVA was achieved through a rigorous process involving Ni-NTA chromatography column and size exclusion chromatography. This study utilized Biacore to obtain a direct determination of the kinetic parameters of interaction between SpoVM (SpoVMP9A) and SpoIVA in Bicelle conditions.

Bacterial cell surface nanoenvironment requires a specialized chaperone to activate a peptidoglycan biosynthetic enzyme

Bacillus subtilis spores are produced inside the cytosol of a mother cell. Spore surface assembly requires the SpoVK protein in the mother cell, but its function is unknown. Here, we report that SpoVK is a dedicated chaperone from a distinct higher-order clade of AAA+ ATPases that activates the peptidoglycan glycosyltransferase MurG during sporulation, even though MurG does not normally require activation by a chaperone during vegetative growth. MurG redeploys to the spore surface during sporulation, where we show that the local pH is reduced and propose that this change in cytosolic nanoenvironment necessitates a specific chaperone for proper MurG function. Further, we show that SpoVK participates in a developmental checkpoint in which improper spore surface assembly inactivates SpoVK, which leads to sporulation arrest. The AAA+ ATPase clade containing SpoVK includes other dedicated chaperones involved in secretion, cell-envelope biosynthesis, and carbohydrate metabolism, suggesting that such fine-tuning might be a widespread feature of different subcellular nanoenvironments.

Bacterial developmental checkpoint that directly monitors cell surface morphogenesis

Bacillus subtilis spores are encased in two concentric shells: an outer proteinaceous "coat" and an inner peptidoglycan "cortex," separated by a membrane. Cortex assembly depends on coat assembly initiation, but how cells achieve this coordination across the membrane is unclear. Here, we report that the protein SpoVID monitors the polymerization state of the coat basement layer via an extension to a functional intracellular LysM domain that arrests sporulation when coat assembly is initiated improperly. Whereas extracellular LysM domains bind mature peptidoglycan, SpoVID LysM binds to the membrane-bound lipid II peptidoglycan precursor. We propose that improper coat assembly exposes the SpoVID LysM domain, which then sequesters lipid II and prevents cortex assembly. SpoVID defines a widespread group of firmicute proteins with a characteristic N-terminal domain and C-terminal peptidoglycan-binding domains that might combine coat and cortex assembly roles to mediate a developmental checkpoint linking the morphogenesis of two spatially separated supramolecular structures.

Cytoskeletal proteins: Lessons learned from bacteria

Cytoskeletal proteins are classified as a group that is defined functionally, whose members are capable of polymerizing into higher order structures, either dynamically or statically, to perform structural roles during a variety of cellular processes. In eukaryotes, the most well-studied cytoskeletal proteins are actin, tubulin, and intermediate filaments, and are essential for cell shape and movement, chromosome segregation, and intracellular cargo transport. Prokaryotes often harbor homologs of these proteins, but in bacterial cells, these homologs are usually not employed in roles that can be strictly defined as "cytoskeletal". However, several bacteria encode other proteins capable of polymerizing which, although they do not appear to have a eukaryotic counterpart, nonetheless appear to perform a more traditional "cytoskeletal" function. In this review, we discuss recent reports that cover the structure and functions of prokaryotic proteins that are broadly termed as cytoskeletal, either by sequence homology or by function, to highlight how the enzymatic properties of traditionally studied cytoskeletal proteins may be used for other types of cellular functions; and to demonstrate how truly "cytoskeletal" functions may be performed by uniquely bacterial proteins that do not display homology to eukaryotic proteins.

Reformulation of an extant ATPase active site to mimic ancestral GTPase activity reveals a nucleotide base requirement for function

Hydrolysis of nucleoside triphosphates releases similar amounts of energy. However, ATP hydrolysis is typically used for energy-intensive reactions, whereas GTP hydrolysis typically functions as a switch. SpoIVA is a bacterial cytoskeletal protein that hydrolyzes ATP to polymerize irreversibly during Bacillus subtilis sporulation. SpoIVA evolved from a TRAFAC class of P-loop GTPases, but the evolutionary pressure that drove this change in nucleotide specificity is unclear. We therefore reengineered the nucleotide-binding pocket of SpoIVA to mimic its ancestral GTPase activity. SpoIVA^GTPase functioned properly as a GTPase but failed to polymerize because it did not form an NDP-bound intermediate that we report is required for polymerization. Further, incubation of SpoIVA^GTPase with limiting ATP did not promote efficient polymerization. This approach revealed that the nucleotide base, in addition to the energy released from hydrolysis, can be critical in specific biological functions. We also present data suggesting that increased levels of ATP relative to GTP at the end of sporulation was the evolutionary pressure that drove the change in nucleotide preference in SpoIVA.

A 2-dimensional ratchet model describes assembly initiation of a specialized bacterial cell surface

Bacterial spores are dormant cells that are encased in a thick protein shell, the "coat," which participates in protecting the organism's DNA from environmental insults. The coat is composed of dozens of proteins that assemble in an orchestrated fashion during sporulation. In Bacillus subtilis, 2 proteins initiate coat assembly: SpoVM, which preferentially binds to micron-scale convex membranes and marks the surface of the developing spore as the site for coat assembly; and SpoIVA, a structural protein recruited by SpoVM that uses ATP hydrolysis to drive its irreversible polymerization around the developing spore. Here, we describe the initiation of coat assembly by SpoVM and SpoIVA. Using single-molecule fluorescence microscopy in vivo in sporulating cells and in vitro on synthetic spores, we report that SpoVM's localization is primarily driven by a lower off-rate on membranes of preferred curvature in the absence of other coat proteins. Recruitment and polymerization of SpoIVA results in the entrapment of SpoVM on the forespore surface. Using experimentally derived reaction parameters, we show that a 2-dimensional ratchet model can describe the interdependent localization dynamics of SpoVM and SpoIVA, wherein SpoVM displays a longer residence time on the forespore surface, which favors recruitment of SpoIVA to that location. Localized SpoIVA polymerization in turn prevents further sampling of other membranes by prelocalized SpoVM molecules. Our model therefore describes the dynamics of structural proteins as they localize and assemble at the correct place and time within a cell to form a supramolecular complex.

Vaccine display on artificial bacterial spores enhances protective efficacy against Staphylococcus aureus infection

Spores of Bacillus subtilis are encased in a protein coat composed of ∼80 different proteins. Recently, we reconstituted the basement layer of the coat, composed of two structural proteins (SpoVM and SpoIVA) around spore-sized silica beads encased in a lipid bilayer, to create synthetic spore-like particles termed 'SSHELs'. We demonstrated that SSHELs could display thousands of copies of proteins and small molecules of interest covalently linked to SpoIVA. In this study, we investigated the efficacy of SSHELs in delivering vaccines. We show that intramuscular vaccination of mice with undecorated one micron-diameter SSHELs elicited an antibody response against SpoIVA. We further demonstrate that SSHELs covalently modified with a catalytically inactivated staphylococcal alpha toxin variant (HlaH35L), without an adjuvant, resulted in improved protection against Staphylococcus aureus infection in a bacteremia model as compared to vaccination with the antigen alone. Although vaccination with either HlaH35L or HlaH35L conjugated to SSHELs similarly elicited the production of neutralizing antibodies to Hla, we found that a subset of memory T cells was differentially activated when the antigen was delivered on SSHELs. We propose that the particulate nature of SSHELs elicits a more robust immune response to the vaccine that results in superior protection against subsequent S. aureus infection.

Dash-and-Recruit Mechanism Drives Membrane Curvature Recognition by the Small Bacterial Protein SpoVM

In Bacillus subtilis, sporulation requires that the 26-amino acid protein SpoVM embeds specifically into the forespore membrane, a structure with convex curvature. How this nanometer-sized protein can detect curves on a micrometer scale is not well understood. Here, we report that SpoVM exploits a "dash-and-recruit" mechanism to preferentially accumulate on the forespore. Using time-resolved imaging and flow cytometry, we observe that SpoVM exhibits a faster adsorption rate onto membranes of higher convex curvature. This preferential adsorption is accurately modeled as a two-step process: first, an initial binding event occurs with a faster on rate, then cooperative recruitment of additional SpoVM molecules follows. We demonstrate that both this biochemical process and effective sporulation in vivo require an unstructured and flexible SpoVM N terminus. We propose that this two-pronged strategy of fast adsorption followed by recruitment of subsequent molecules is a general mechanism that allows small proteins to detect subtle curves with a radius 1,000-fold their size.

The Conserved Spore Coat Protein SpoVM Is Largely Dispensable in Clostridium difficile Spore Formation

The spore-forming obligate anaerobe Clostridium difficile is the leading cause of antibiotic-associated diarrheal disease in the United States. When C. difficile spores are ingested by susceptible individuals, they germinate within the gut and transform into vegetative, toxin-secreting cells. During infection, C. difficile must also induce spore formation to survive exit from the host. Since spore formation is essential for transmission, understanding the basic mechanisms underlying sporulation in C. difficile could inform the development of therapeutic strategies targeting spores. In this study, we determine the requirement of the C. difficile homolog of SpoVM, a protein that is essential for spore formation in Bacillus subtilis due to its regulation of coat and cortex formation. We observed that SpoVM plays a minor role in C. difficile spore formation, in contrast with B. subtilis, indicating that this protein would not be a good target for inhibiting spore formation.

The spore-forming bacterial pathogen Clostridium difficile is a leading cause of health care-associated infections in the United States. In order for this obligate anaerobe to transmit infection, it must form metabolically dormant spores prior to exiting the host. A key step during this process is the assembly of a protective, multilayered proteinaceous coat around the spore. Coat assembly depends on coat morphogenetic proteins recruiting distinct subsets of coat proteins to the developing spore. While 10 coat morphogenetic proteins have been identified in Bacillus subtilis, only two of these morphogenetic proteins have homologs in the Clostridia: SpoIVA and SpoVM. C. difficile SpoIVA is critical for proper coat assembly and functional spore formation, but the requirement for SpoVM during this process was unknown. Here, we show that SpoVM is largely dispensable for C. difficile spore formation, in contrast with B. subtilis. Loss of C. difficile SpoVM resulted in modest decreases (~3-fold) in heat- and chloroform-resistant spore formation, while morphological defects such as coat detachment from the forespore and abnormal cortex thickness were observed in ~30% of spoVM mutant cells. Biochemical analyses revealed that C. difficile SpoIVA and SpoVM directly interact, similarly to their B. subtilis counterparts. However, in contrast with B. subtilis, C. difficile SpoVM was not essential for SpoIVA to encase the forespore. Since C. difficile coat morphogenesis requires SpoIVA-interacting protein L (SipL), which is conserved exclusively in the Clostridia, but not the more broadly conserved SpoVM, our results reveal another key difference between C. difficile and B. subtilis spore assembly pathways.

IMPORTANCE The spore-forming obligate anaerobe Clostridium difficile is the leading cause of antibiotic-associated diarrheal disease in the United States. When C. difficile spores are ingested by susceptible individuals, they germinate within the gut and transform into vegetative, toxin-secreting cells. During infection, C. difficile must also induce spore formation to survive exit from the host. Since spore formation is essential for transmission, understanding the basic mechanisms underlying sporulation in C. difficile could inform the development of therapeutic strategies targeting spores. In this study, we determine the requirement of the C. difficile homolog of SpoVM, a protein that is essential for spore formation in Bacillus subtilis due to its regulation of coat and cortex formation. We observed that SpoVM plays a minor role in C. difficile spore formation, in contrast with B. subtilis, indicating that this protein would not be a good target for inhibiting spore formation.

The Spore Coat

Spores of Clostridiales and Bacillales are encased in a complex series of concentric shells that provide protection, facilitate germination, and mediate interactions with the environment. Analysis of diverse spore-forming species by thin-section transmission electron microscopy reveals that the number and morphology of these encasing shells vary greatly. In some species, they appear to be composed of a small number of discrete layers. In other species, they can comprise multiple, morphologically complex layers. In addition, spore surfaces can possess elaborate appendages. For all their variability, there is a consistent architecture to the layers encasing the spore. A hallmark of all Clostridiales and Bacillales spores is the cortex, a layer made of peptidoglycan. In close association with the cortex, all species examined possess, at a minimum, a series of proteinaceous layers, called the coat. In some species, including Bacillus subtilis, only the coat is present. In other species, including Bacillus anthracis, an additional layer, called the exosporium, surrounds the coat. Our goals here are to review the present understanding of the structure, composition, assembly, and functions of the coat, primarily in the model organism B. subtilis, but also in the small but growing number of other spore-forming species where new data are showing that there is much to be learned beyond the relatively well-developed basis of knowledge in B. subtilis. To help summarize this large field and define future directions for research, we will focus on key findings in recent years.

Engineering Rugged Field Assays to Detect Hazardous Chemicals Using Spore-Based Bacterial Biosensors

Bacterial whole cell-based biosensors have been genetically engineered to achieve selective and reliable detection of a wide range of hazardous chemicals. Although whole-cell biosensors demonstrate many advantages for field-based detection of target analytes, there are still some challenges that need to be addressed. Most notably, their often modest shelf life and need for special handling and storage make them challenging to use in situations where access to reagents, instrumentation, and expertise are limited. These problems can be circumvented by developing biosensors in Bacillus spores, which can be engineered to address all of these concerns. In its sporulated state, a whole cell-based biosensor has a remarkably long life span and is exceptionally resistant to environmental insult. When these spores are germinated for use in analytical techniques, they show no loss in performance, even after long periods of storage under harsh conditions. In this chapter, we will discuss the development and use of whole cell-based sensors, their adaptation to spore-based biosensors, their current applications, and future directions in the field.

Protein Targeting during Bacillus subtilis Sporulation

The Gram-positive bacterium Bacillus subtilis initiates the formation of an endospore in response to conditions of nutrient limitation. The morphological differentiation that spores undergo initiates with the formation of an asymmetric septum near to one pole of the cell, forming a smaller compartment, the forespore, and a larger compartment, the mother cell. This process continues with the complex morphogenesis of the spore as governed by an intricate series of interactions between forespore and mother cell proteins across the inner and outer forespore membranes. Given that these interactions occur at a particular place in the cell, a critical question is how the proteins involved in these processes get properly targeted, and we discuss recent progress in identifying mechanisms responsible for this targeting.

A Quality-Control Mechanism Removes Unfit Cells from a Population of Sporulating Bacteria

Recent discoveries of regulated cell death in bacteria have led to speculation about possible benefits that apoptosis-like pathways may confer to single-celled organisms. However, establishing how these pathways provide increased ecological fitness has remained difficult to determine. Here, we report a pathway in Bacillus subtilis in which regulated cell death maintains the fidelity of sporulation through selective removal of cells that misassemble the spore envelope. The spore envelope, which protects the dormant spore's genome from environmental insults, uses the protein SpoIVA as a scaffold for assembly. We found that disrupting envelope assembly activates a cell death pathway wherein the small protein CmpA acts as an adaptor to the AAA+ ClpXP protease to degrade SpoIVA, thereby halting sporulation and resulting in lysis of defective sporulating cells. We propose that removal of unfit cells from a population of terminally differentiating cells protects against evolutionary deterioration and ultimately loss of the sporulation program.

A versatile nano display platform from bacterial spore coat proteins

Dormant bacterial spores are encased in a thick protein shell, the ‘coat', which contains ∼70 different proteins. The coat protects the spore from environmental insults, and is among the most durable static structures in biology. Owing to extensive cross-linking among coat proteins, this structure has been recalcitrant to detailed biochemical analysis, so molecular details of how it assembles are largely unknown. Here, we reconstitute the basement layer of the coat atop spherical membranes supported by silica beads to create artificial spore-like particles. We report that these synthetic spore husk-encased lipid bilayers (SSHELs) assemble and polymerize into a static structure, mimicking in vivo basement layer assembly during sporulation in Bacillus subtilis. In addition, we demonstrate that SSHELs may be easily covalently modified with small molecules and proteins. We propose that SSHELs may be versatile display platforms for drugs and vaccines in clinical settings, or for enzymes that neutralize pollutants for environmental remediation.

The densely crosslinked protein coats of bacterial spores are among the most durable static structures in biology. Wu et al. reconstitute the basement layer of a bacterial spore coat on membrane-coated beads, and generate covalently-modified spore-like particles with therapeutic potential.

Spore formation in Bacillus subtilis

Although prokaryotes ordinarily undergo binary fission to produce two identical daughter cells, some are able to undergo alternative developmental pathways that produce daughter cells of distinct cell morphology and fate. One such example is a developmental programme called sporulation in the bacterium Bacillus subtilis, which occurs under conditions of environmental stress. Sporulation has long been used as a model system to help elucidate basic processes of developmental biology including transcription regulation, intercellular signalling, membrane remodelling, protein localization and cell fate determination. This review highlights some of the recent work that has been done to further understand prokaryotic cell differentiation during sporulation and its potential applications.

An autoinhibitory conformation of the Bacillus subtilis spore coat protein SpoIVA prevents its premature ATP-independent aggregation

Spores of Bacillus subtilis are dormant cell types that are formed when the bacterium encounters starvation conditions. Spores are encased in a shell, termed the coat, which is composed of approximately seventy different proteins and protects the spore's genetic material from environmental insults. The structural component of the basement layer of the coat is an exceptional cytoskeletal protein, termed SpoIVA, which binds and hydrolyzes ATP. ATP hydrolysis is utilized to drive a conformational change in SpoIVA that leads to its irreversible self-assembly into a static polymer in vitro. Here, we characterize the middle domain of SpoIVA, the predicted secondary structure of which resembles the chemotaxis protein CheX but, unlike CheX, does not harbor residues required for phosphatase activity. Disruptions in this domain did not abolish ATP hydrolysis, but resulted in mislocalization of the protein and reduction in sporulation efficiency in vivo. In vitro, disruptions in this domain prevented the ATP hydrolysis-driven conformational change in SpoIVA required for polymerization and led to the aggregation of SpoIVA into particles that did not form filaments. We propose a model in which SpoIVA initially assumes a conformation in which it inhibits its own aggregation into particles, and that ATP hydrolysis remodels the protein so that it assumes a polymerization-competent conformation.

[Overview of study on Bacillus subtilis spores]

This review documents my research for the past 29 years in the work of bacterial sporulation. The Gram-positive bacterium Bacillus subtilis forms spores when conditions are unsuitable for growth. The mature spores remain for long periods of starvation and are resistant to harsh environment. This property is attributed mainly to the unique figures of spore's outer layers, spore coat. The protein composition of the spores was comprehensively analyzed by a combination of SDS-PAGE and LC-MS/MS. The total of 154 proteins were identified and 69 of them were novel. The expression of the genes encoding them was dependent on sporulation-specific sigma factors, σF, σE, σG and σK. The expression of a coat protein gene, cotS, was dependent on σK and GerE. CotE is essential for the assembly of CotS in the coat layer. Many coat genes were identified by reverse genetics and the regulation of the gene expression was studied in detail. Some cot genes are functioned in the resistance to heat and lysozyme, and some of the coat proteins are involved in the specificity of germinants. The yrbA is essential in spore development, yrbA deficient cells revealed abnormal figures of spore coat structure and changed the response to germinants. The location of 16 coat proteins was determined by the observation of fluorescence microscopy using fluorescence-labelled proteins. One protein was assigned to the cortex, nine to the inner coat, and four to the outer coat. In addition, CotZ and CgeA appeared in the outermost layer of the spore coat.

The Bacillus subtilis endospore: assembly and functions of the multilayered coat

Sporulation in Bacillus subtilis involves an asymmetric cell division followed by differentiation into two cell types, the endospore and the mother cell. The endospore coat is a multilayered shell that protects the bacterial genome during stress conditions and is composed of dozens of proteins. Recently, fluorescence microscopy coupled with high-resolution image analysis has been applied to the dynamic process of coat assembly and has shown that the coat is organized into at least four distinct layers. In this Review, we provide a brief summary of B. subtilis sporulation, describe the function of the spore surface layers and discuss the recent progress that has improved our understanding of the structure of the endospore coat and the mechanisms of coat assembly.

ATP hydrolysis by a domain related to translation factor GTPases drives polymerization of a static bacterial morphogenetic protein

The assembly of static supramolecular structures is a culminating event of developmental programs. One such structure, the proteinaceous shell (called the coat) that surrounds spores of the bacterium Bacillus subtilis, is composed of about 70 different proteins and represents one of the most durable biological structures known. The coat is built atop a basement layer that contains an ATPase (SpoIVA) that forms a platform required for coat assembly. Here, we show that SpoIVA belongs to the translation factors class of P-loop GTPases and has evolutionarily lost the ability to bind GTP; instead, it uses ATP hydrolysis to drive its self-assembly into static filaments. We demonstrate that ATP hydrolysis is required by every subunit for incorporation into the growing polymer by inducing a conformational change that drives polymerization of a nucleotide-free filament. SpoIVA therefore differs from other self-organizing polymers (dynamic cytoskeletal structures and static intermediate filaments) in that it uses ATP hydrolysis to self-assemble, not disassemble, into a static polymer. We further show that polymerization requires a critical concentration that we propose is only achieved once SpoIVA is recruited to the surface of the developing spore, thereby ensuring that SpoIVA polymerization only occurs at the correct subcellular location during spore morphogenesis.

Small proteins link coat and cortex assembly during sporulation in Bacillus subtilis

Mature spores of the bacterium Bacillus subtilis are encased by two concentric shells: an inner shell (the 'cortex'), made of peptidoglycan; and an outer proteinaceous shell (the 'coat'), whose basement layer is anchored to the surface of the developing spore via a 26-amino-acid-long protein called SpoVM. During sporulation, initiation of cortex assembly depends on the successful initiation of coat assembly, but the mechanisms that co-ordinate the morphogenesis of both structures are largely unknown. Here, we describe a sporulation pathway involving SpoVM and a 37-amino-acid-long protein named 'CmpA' that is encoded by a previously un-annotated gene and is expressed under control of two sporulation-specific transcription factors (σ(E) and SpoIIID). CmpA localized to the surface of the developing spore and deletion of cmpA resulted in cells progressing through the sporulation programme more quickly. Overproduction of CmpA did not affect normal growth or cell division, but delayed entry into sporulation and abrogated cortex assembly. In those cells that had successfully initiated coat assembly, CmpA was removed by a post-translational mechanism, presumably in order to overcome the sporulation inhibition it imposed. We propose a model in which CmpA participates in a developmental checkpoint that ensures the proper orchestration of coat and cortex morphogenesis by repressing cortex assembly until coat assembly successfully initiates.

The coat morphogenetic protein SpoVID is necessary for spore encasement in Bacillus subtilis

Endospores formed by Bacillus subtilis are encased in a tough protein shell known as the coat, which consists of at least 70 different proteins. We investigated the process of spore coat morphogenesis using a library of 40 coat proteins fused to green fluorescent protein and demonstrate that two successive steps can be distinguished in coat assembly. The first step, initial localization of proteins to the spore surface, is dependent on the coat morphogenetic proteins SpoIVA and SpoVM. The second step, spore encasement, requires a third protein, SpoVID. We show that in spoVID mutant cells, most coat proteins assembled into a cap at one side of the developing spore but failed to migrate around and encase it. We also found that SpoIVA directly interacts with SpoVID. A domain analysis revealed that the N-terminus of SpoVID is required for encasement and is a structural homologue of a virion protein, whereas the C-terminus is necessary for the interaction with SpoIVA. Thus, SpoVM, SpoIVA and SpoVID are recruited to the spore surface in a concerted manner and form a tripartite machine that drives coat formation and spore encasement.

Expression of yeeK during Bacillus subtilis sporulation and localization of YeeK to the inner spore coat using fluorescence microscopy

The yeeK gene of Bacillus subtilis is predicted to encode a protein of 145 amino acids composed of 28% glycine, 23% histidine, and 12% tyrosine residues. Previous studies were unable to detect YeeK in wild-type spores; however, the 18-kDa YeeK polypeptide has been identified in yabG mutant spores. In this study, we analyze the expression and localization of YeeK to explore the relationship between YeeK and YabG. Northern hybridization analysis of wild-type RNA indicated that transcription of the yeeK gene, which was initiated 5 h after the onset of sporulation, was dependent on a SigK-containing RNA polymerase and the GerE protein. Genetic disruption of yeeK did not impair vegetative growth, development of resistant spores, or germination. Fluorescent microscopy of in-frame fusions of YeeK with green fluorescent protein (YeeK-GFP) and red fluorescent protein (YeeK-RFP) confirmed that YeeK assembles into the spore integument. CotE, SafA, and SpoVID were required for the proper localization of YeeK-GFP. Comparative analysis of YeeK-RFP and an in-frame GFP fusion of YabG indicated that YeeK colocalized with YabG in the spore coat. This is the first use of fluorescent proteins to show localization to different layers of the spore coat. Immunoblotting with anti-GFP antiserum indicated that YeeK-GFP was primarily synthesized as a 44-kDa molecule, which was then digested into a 29-kDa fragment that corresponded to the molecular size of GFP in wild-type spores. In contrast, a minimal amount of 44-kDa YeeK-GFP was digested in yabG mutant spores. Our findings demonstrate that YeeK is guided into the spore coat by CotE, SafA, and SpoVID. We conclude that YabG is directly or indirectly involved in the digestion of YeeK.

ATP-driven self-assembly of a morphogenetic protein in Bacillus subtilis

A hallmark of morphogenesis is the orchestrated assembly of complex, supramolecular structures. One such structure is the proteineous coat that surrounds spores of the bacterium Bacillus subtilis. The coat is a multilayered shell that is composed of more than 50 proteins. These proteins assemble around a basement layer composed of the morphogenetic protein SpoIVA. We show that SpoIVA harbors a Walker A box that is required for the proper deployment of the protein to the surface of the developing spore and proper assembly of the entire coat. We further show that purified SpoIVA both binds and hydrolyzes ATP and that the protein self-assembles into cable-like structures in a manner that depends on ATP hydrolysis. Self-assembly driven by ATP is an unusual mechanism for the construction of a large cellular structure.

Protozoal digestion of coat-defective Bacillus subtilis spores produces "rinds" composed of insoluble coat protein

The Bacillus subtilis spore coat is a multilayer, proteinaceous structure that consists of more than 50 proteins. Located on the surface of the spore, the coat provides resistance to potentially toxic molecules as well as to predation by the protozoan Tetrahymena thermophila. When coat-defective spores are fed to Tetrahymena, the spores are readily digested. However, a residue termed a "rind" that looks like coat material remains. As observed with a phase-contrast microscope, the rinds are spherical or hemispherical structures that appear to be devoid of internal contents. Atomic force microscopy and chemical analyses showed that (i) the rinds are composed of insoluble protein largely derived from both outer and inner spore coat layers, (ii) the amorphous layer of the outer coat is largely responsible for providing spore resistance to protozoal digestion, and (iii) the rinds and intact spores do not contain significant levels of silicon.

The functional analysis of YabA, which interacts with DnaA and regulates initiation of chromosome replication in Bacillus subtils

The initiation of bacterial chromosome DNA replication and its regulation are critical events. DnaA is essential for initiation of DNA replication and is conserved throughout bacteria. In Escherichia coli, hydrolysis of ATP-DnaA is promoted by Hda through formation of a ternary complex with DnaA and DnaN, ensuring the timely inactivation of DnaA during the replication cycle. In Bacillus subtilis, YabA also forms a ternary complex with DnaA and DnaN, and negatively regulates the initiation step of DNA replication. However, YabA shares no structural homology with Hda and the regulatory mechanism itself has not been clarified. Here, in contrast to Hda, we observed that dnaA transcription was stable during under- and overexpression of YabA. ChAP-chip assays showed that the depletion of YabA did not affect DNA binding by DnaA. On the other hand, yeast two-hybrid analysis indicated that the DnaA ATP-binding domain interacts with YabA. Moreover, mutations in YabA interaction-deficient mutants, isolated by yeast two-hybrid analysis, are located at the back of the ATP-binding domain, whereas Hda is thought to interact with the ATP-binding pocket itself. The introduction into B. subtilis of a dnaA(Y144C) mutation, which disabled the interaction with YabA but did not affect interactions either with DnaA itself or with DnaD, resulted in over-initiation and asynchronous initiation of replication and disabled the formation of YabA foci, further demonstrating that the amino acid on the opposite side to the ATP-binding pocket is important for YabA binding. These results indicate that YabA indeed regulates the initiation of DNA replication by a different mechanism from that used by Hda in the E. coli RIDA system. Interestingly, all DnaA mutants deficient in YabA binding also displayed reduced DnaD binding in yeast two-hybrid assays, suggesting that YabA can inhibit replication initiation through competitive inhibition of DnaD binding to DnaA.

Structure, assembly, and function of the spore surface layers

Endospores formed by Bacillus, Clostridia, and related genera are encased in a protein shell called the coat. In many species, including B. subtilis, the coat is the outermost spore structure, and in other species, such as the pathogenic organisms B. anthracis and B. cereus, the spore is encased in an additional layer called the exosporium. Both the coat and the exosporium have roles in protection of the spore and in its environmental interactions. Assembly of both structures is a function of the mother cell, one of two cellular compartments of the developing sporangium. Studies in B. subtilis have revealed that the timing of coat protein production, the guiding role of a small group of morphogenetic proteins, and several types of posttranslational modifications are essential for the fidelity of the assembly process. Assembly of the exosporium requires a set of novel proteins as well as homologues of proteins found in the outermost layers of the coat and of some of the coat morphogenetic factors, suggesting that the exosporium is a more specialized structure of a multifunctional coat. These and other insights into the molecular details of spore surface morphogenesis provide avenues for exploitation of the spore surface layers in applications for biotechnology and medicine.

Peptide anchoring spore coat assembly to the outer forespore membrane in Bacillus subtilis

Spore formation in Bacillus subtilis involves the formation of a thick, proteinaceous shell or coat that is assembled around a specialized membrane known as the outer forespore membrane. Here we present evidence that the assembling coat is tethered to the outer forespore membrane by a 26-amino-acid peptide called SpoVM, which is believed to form an amphipathic helix. We show that proper localization of SpoVM is dependent on SpolVA, a morphogenetic protein that forms the basement layer of the spore coat, and conversely, that proper localization of SpoIVA is dependent on SpoVM. Genetic, biochemical and cytological evidence indicates that this mutual dependence is mediated in part by contact between an amino acid side-chain located near the extreme C-terminus of SpoIVA and an amino acid side-chain on the hydrophilic face of the SpoVM helix. Evidence is also presented that SpoVM adheres to the outer forespore membrane via hydrophobic, amino acid side-chains on the hydrophobic face of the helix. The results suggest that the SpoVM helix is oriented parallel to the membrane with the hydrophobic face buried in the lipid bilayer.

Cytological analysis of the mother cell death process during sporulation in Bacillus subtilis

We have identified the following events during the late stage in the mother cell in Bacillus subtilis: spore detachment from the polar site of the mother cell, membrane rupture, cell wall collapse, and release of the free spore. The membrane rupture was followed by mother cell lysis. Moreover, we found that NucB, an extracellular nuclease, is involved in DNA degradation after mother cell lysis.

The timing of cotE expression affects Bacillus subtilis spore coat morphology but not lysozyme resistance

The synthesis of structural components and morphogenetic factors required for the assembly of the Bacillus subtilis spore coat is governed by a mother cell-specific transcriptional cascade. The first two temporal classes of gene expression, which involve RNA polymerase sigma sigma(E) factor and the ancillary regulators GerR and SpoIIID, are deployed prior to engulfment of the prespore by the mother cell. The two last classes rely on sigma(K), whose activation follows engulfment completion, and GerE. The cotE gene codes for a morphogenetic protein essential for the assembly of the outer coat layer and spore resistance to lysozyme. cotE is expressed first from a sigma(E)-dependent promoter and, in a second stage, from a promoter that additionally requires SpoIIID and that remains active under sigma(K) control. CotE localizes prior to engulfment completion close to the surface of the developing spore, but formation of the outer coat is a late, sigma(K)-controlled event. We have transplanted cotE to progressively later classes of mother cell gene expression. This created an early class of mutants in which cotE is expressed prior to engulfment completion and a late class in which expression of cotE follows the complete engulfment of the prespore. Mutants of the early class assemble a nearly normal outer coat structure, whereas mutants of the late class do not. Hence, the early expression of CotE is essential for outer coat assembly. Surprisingly, however, all mutants were fully resistant to lysozyme. The results suggest that CotE has genetically separable functions in spore resistance to lysozyme and spore outer coat assembly.

Morphogenesis of the Bacillus anthracis spore

Bacillus spp. and Clostridium spp. form a specialized cell type, called a spore, during a multistep differentiation process that is initiated in response to starvation. Spores are protected by a morphologically complex protein coat. The Bacillus anthracis coat is of particular interest because the spore is the infective particle of anthrax. We determined the roles of several B. anthracis orthologues of Bacillus subtilis coat protein genes in spore assembly and virulence. One of these, cotE, has a striking function in B. anthracis: it guides the assembly of the exosporium, an outer structure encasing B. anthracis but not B. subtilis spores. However, CotE has only a modest role in coat protein assembly, in contrast to the B. subtilis orthologue. cotE mutant spores are fully virulent in animal models, indicating that the exosporium is dispensable for infection, at least in the context of a cotE mutation. This has implications for both the pathophysiology of the disease and next-generation therapeutics. CotH, which directs the assembly of an important subset of coat proteins in B. subtilis, also directs coat protein deposition in B. anthracis. Additionally, however, in B. anthracis, CotH effects germination; in its absence, more spores germinate than in the wild type. We also found that SpoIVA has a critical role in directing the assembly of the coat and exosporium to an area around the forespore. This function is very similar to that of the B. subtilis orthologue, which directs the assembly of the coat to the forespore. These results show that while B. anthracis and B. subtilis rely on a core of conserved morphogenetic proteins to guide coat formation, these proteins may also be important for species-specific differences in coat morphology. We further hypothesize that variations in conserved morphogenetic coat proteins may play roles in taxonomic variation among species.

Interaction between coat morphogenetic proteins SafA and SpoVID

Morphogenetic proteins such as SpoVID and SafA govern assembly of the Bacillus subtilis endospore coat by guiding the various protein structural components to the surface of the developing spore. Previously, a screen for peptides able to interact with SpoVID led to the identification of a PYYH motif present in the C-terminal half of the SafA protein and to the subsequent demonstration that SpoVID and SafA directly interact. spoVID and safA spores show deficiencies in coat assembly and are lysozyme susceptible. Both proteins, orthologs of which are found in all Bacillus species, have LysM domains for peptidoglycan binding and localize to the cortex-coat interface. Here, we show that the interaction between SafA and SpoVID involves the PYYH motif (region B) but also a 13-amino-acid region (region A) just downstream of the N-terminal LysM domain of SafA. We show that deletion of region B does not block the interaction of SafA with SpoVID, nor does it bring about spore susceptibility to lysozyme. Nevertheless, it appears to reduce the interaction and affects the complex. In contrast, lesions in region A impaired the interaction of SafA with SpoVID in vitro and, while not affecting the accumulation of SafA in vivo, interfered with the localization of SafA around the developing spore, causing aberrant assembly of the coat and lysozyme sensitivity. A peptide corresponding to region A interacts with SpoVID, suggesting that residues within this region directly contact SpoVID. Since region A is highly conserved among SafA orthologs, this motif may be an important determinant of coat assembly in the group of Bacillus spore formers.

A new FtsZ-interacting protein, YlmF, complements the activity of FtsA during progression of cell division in Bacillus subtilis

The assembly of ring-like structures, composed of FtsZ proteins (i.e. the Z ring), is the earliest and most essential process in bacterial cytokinesis. It has been shown that this process is directly regulated by the FtsZ-binding proteins, FtsA, ZapA, and EzrA, in Bacillus subtilis. In this study, protein complexes that are involved in Z-ring formation were chemically cross-linked in vivo, purified by affinity chromatography, and analysed by mass spectrometry. Analysis of the results identified YlmF as a new component of the FtsZ complex. Yeast two-hybrid analysis and fluorescence microscopy of YFP-YlmF in B. subtilis cells indicated YlmF localizes to the division site in an FtsZ-dependent manner. A single disruption of YlmF resulted in a slight elongation of cells; however, simultaneous inactivation of both YlmF and FtsA showed synthetic lethality caused by complete blockage of cell division due to the defect in Z-ring formation. In contrast, the ftsA-null mutant phenotype, caused by inefficient Z-ring formation, could be complemented by overexpression of YlmF. These results suggest that YlmF has an overlapping function with FtsA in stimulating the formation of Z rings in B. subtilis.

Bacillus subtilis EzrA and FtsL synergistically regulate FtsZ ring dynamics during cell division

Previous work has shown that the Bacillus subtilis EzrA protein directly inhibits FtsZ ring assembly, which is required for normal cell division, and that loss of EzrA results in hyperstabilization of the FtsZ polymer in vivo. Here, it was found that in ezrA-disrupted cells, artificial expression of YneA, which suppresses cell division during the SOS response, and disruption of noc (yyaA), which acts as an effector of nucleoid occlusion, resulted in accumulation of multiple non-constricting FtsZ rings, inhibition of cell division, and synthetic lethality. Overexpression of the essential cell division protein FtsL suppressed the effect of ezrA disruption. FtsL overexpression recovered the delayed FtsZ ring constriction seen in ezrA-disrupted wild-type cells. Conversely, the absence of EzrA caused lethality in cells producing a lower amount of FtsL than wild-type cells. It has previously been reported that FtsL is recruited to the division site during the later stages of cell division, although its exact role is currently unknown. The results of this study suggest that FtsL and EzrA synergistically regulate the FtsZ ring constriction in B. subtilis. Interestingly, FtsL overexpression also suppressed the cell division inhibition due to YneA expression or Noc inactivation in ezrA-disrupted cells.

Characterization of the Bacillus subtilis spore morphogenetic coat protein CotO

Bacillus spores are protected by a structurally and biochemically complex protein shell composed of over 50 polypeptide species, called the coat. Coat assembly in Bacillus subtilis serves as a relatively tractable model for the study of the formation of more complex macromolecular structures and organelles. It is also a critical model for the discovery of strategies to decontaminate B. anthracis spores. In B. subtilis, a subset of coat proteins is known to have important roles in assembly. Here we show that the recently identified B. subtilis coat protein CotO (YjbX) has an especially important morphogenetic role. We used electron and atomic force microscopy to show that CotO controls assembly of the coat layers and coat surface topography as well as biochemical and cell-biological analyses to identify coat proteins whose assembly is CotO dependent. cotO spores are defective in germination and partially sensitive to lysozyme. As a whole, these phenotypes resemble those resulting from a mutation in the coat protein gene cotH. Nonetheless, the roles of CotH and CotO and the proteins whose assembly they direct are not identical. Based on fluorescence and electron microscopy, we suggest that CotO resides in the outer coat (although not on the coat surface). We propose that CotO and CotH participate in a late phase of coat assembly. We further speculate that an important role of these proteins is ensuring that polymerization of the outer coat layers occurs in such a manner that contiguous shells, and not unproductive aggregates, are formed.

TheBacillus subtilisspore coat protein interaction network

Bacterial spores are surrounded by a morphologically complex, mechanically flexible protein coat, which protects the spore from toxic molecules. The interactions among the over 50 proteins that make up the coat remain poorly understood. We have used cell biological and protein biochemical approaches to identify novel coat proteins in Bacillus subtilis and describe the network of their interactions, in order to understand coat assembly and the molecular basis of its protective functions and mechanical properties. Our analysis characterizes the interactions between 32 coat proteins. This detailed view reveals a complex interaction network. A key feature of the network is the importance of a small subset of proteins that direct the assembly of most of the coat. From an analysis of the network topology, we propose a model in which low-affinity interactions are abundant in the coat and account, to a significant degree, for the coat's mechanical properties as well as structural variation between spores.

Dynamic localization of penicillin-binding proteins during spore development in Bacillus subtilis

During Bacillus subtilis spore formation, many membrane proteins that function in spore development localize to the prespore septum and, subsequently, to the outer prespore membrane. Recently, it was shown that the cell-division-specific penicillin-binding proteins (PBPs) 1 and 2b localize to the asymmetric prespore septum. Here, the author studied the localization of other PBPs, fused to green fluorescent protein (GFP), during spore formation. Fusions to PBPs 4, 2c, 2d, 2a, 3, H, 4b, 5, 4a, 4* and X were expressed during vegetative growth, and their localization was monitored during sporulation. Of these PBPs, 2c, 2d, 4b and 4* have been implicated as having a function in sporulation. It was found that PBP2c, 2d and X changed their localization, while the other PBPs tested were not affected. The putative endopeptidase PbpX appears to spiral out in a pattern that resembles FtsZ redistribution during sporulation, but a pbpX knockout strain had no distinguishable phenotype. PBP2c and 2d localize to the prespore septum and follow the membrane during engulfment, and so are redistributed to the prespore membrane. A similar pattern was observed when GFP-PBP2c was expressed in the mother cell from a sporulation-specific promoter. This work shows that various PBPs known to function during sporulation are redistributed from the cytoplasmic membrane to the prespore.

Transglutaminase-mediated cross-linking of GerQ in the coats of Bacillus subtilis spores

The spores of Bacillus subtilis show remarkable resistance to many environmental stresses, due in part to the presence of an outer proteinaceous structure known as the spore coat. GerQ is a spore coat protein essential for the presence of CwlJ, an enzyme involved in the hydrolysis of the cortex during spore germination, in the spore coat. Here we show that GerQ is cross-linked into higher-molecular-mass forms due in large part to a transglutaminase. GerQ is the only substrate for this transglutaminase identified to date. In addition, we show that cross-linking of GerQ into high-molecular-mass forms occurs only very late in sporulation, after mother cell lysis. These findings, as well as studies of GerQ cross-linking in mutant strains where spore coat assembly is perturbed, lead us to suggest that coat proteins must assemble first and that their cross-linking follows as a final step in the spore coat formation pathway.

The program of gene transcription for a single differentiating cell type during sporulation in Bacillus subtilis

Asymmetric division during sporulation by Bacillus subtilis generates a mother cell that undergoes a 5-h program of differentiation. The program is governed by a hierarchical cascade consisting of the transcription factors: σ^E, σ^K, GerE, GerR, and SpoIIID. The program consists of the activation and repression of 383 genes. The σ^E factor turns on 262 genes, including those for GerR and SpoIIID. These DNA-binding proteins downregulate almost half of the genes in the σ^E regulon. In addition, SpoIIID turns on ten genes, including genes involved in the appearance of σ^K_. Next, σ^K activates 75 additional genes, including that for GerE. This DNA-binding protein, in turn, represses half of the genes that had been activated by σ^K while switching on a final set of 36 genes. Evidence is presented that repression and activation contribute to proper morphogenesis. The program of gene expression is driven forward by its hierarchical organization and by the repressive effects of the DNA-binding proteins. The logic of the program is that of a linked series of feed-forward loops, which generate successive pulses of gene transcription. Similar regulatory circuits could be a common feature of other systems of cellular differentiation.

A comprehensive genomic analysis of sporulation in Bacillus subtilis reveals a coordinated program of gene activation and repression, which involves 383 genes

Dynamic patterns of subcellular protein localization during spore coat morphogenesis in Bacillus subtilis

Endospores of Bacillus subtilis are encased in a thick, proteinaceous shell known as the coat, which is composed of a large number of different proteins. Here we report the identification of three previously uncharacterized coat-associated proteins, YabP, YheD, and YutH, and their patterns of subcellular localization during the process of sporulation, obtained by using fusions of the proteins to the green fluorescent protein (GFP). YabP-GFP was found to form both a shell and a ring around the center of the forespore across the short axis of the sporangium. YheD-GFP, in contrast, formed two rings around the forespore that were offset from its midpoint, before it eventually redistributed to form a shell around the developing spore. Finally, YutH-GFP initially localized to a focus at one end of the forespore, which then underwent transformation into a ring that was located adjacent to the forespore. Next, the ring became a cap at the mother cell pole of the forespore that eventually spread around the entire developing spore. Thus, each protein exhibited its own distinct pattern of subcellular localization during the course of coat morphogenesis. We concluded that spore coat assembly is a dynamic process involving diverse patterns of protein assembly and localization.

Functional relationship between SpoVIF and GerE in gene regulation during sporulation of Bacillus subtilis

The sporulation-specific SpoVIF (YjcC) protein of Bacillus subtilis is essential for the development of heat-resistant spores. The GerE protein, the smallest member of the LuxR-FixJ family, contains a helix-turn-helix (HTH) motif and is involved in the expression of various sporulation-specific genes. In this study, the gene expression and protein composition of sporulating spoVIF-negative cells were analysed. CgeA, CotG and CotS, which are GerE-dependent coat proteins, were not expressed in the spoVIF-negative cells. Northern blotting showed that SpoVIF regulated the transcription of cgeA, cotG and cotS in a manner similar to that of GerE. In spoVIF-negative cells, gerE mRNA was transcribed normally, but immunoblot analysis using anti-GerE antiserum showed that the quantity of GerE protein was considerably less than that in wild-type controls. Using GFP (green fluorescent protein) fusion proteins, the localization of SpoVIF and GerE was observed by fluorescence microscopy. SpoVIF-GFP was detectable in the mother cell compartment, as was GerE-GFP. These results suggest that SpoVIF directly or indirectly controls the function of the GerE protein, and that SpoVIF is required for gene regulation during the latter stages of sporulation.

Bacillus subtilis spoVIF (yjcC) gene, involved in coat assembly and spore resistance

In systematic screening four sporulation-specific genes, yjcA, yjcB, yjcZ and yjcC, of unknown function were found in Bacillus subtilis. These genes are located just upstream of the cotVWXYZ gene cluster oriented in the opposite direction. Northern blot analysis showed that yjcA was transcribed by the SigE RNA polymerase beginning 2 h (t(2)) after the onset of sporulation, and yjcB, yjcZ and yjcC were transcribed by the SigK RNA polymerase beginning at t(4) of sporulation. The transcription of yjcZ was dependent on SigK and GerE. The consensus sequences of the appropriate sigma factors were found upstream of each gene. There were putative GerE-binding sites upstream of yjcZ. Insertional inactivation of the yjcC gene resulted in a reduction in resistance of the mutant spores to lysozyme and heat. Transmission electron microscopic examination of yjcC spores revealed a defect of sporulation at stage VI, resulting in loss of spore coats. These results suggest that YjcC is involved in assembly of spore coat proteins that have roles in lysozyme resistance. It is proposed that yjcC should be renamed as spoVIF.

Identification of a new gene essential for germination of Bacillus subtilis spores with Ca2+-dipicolinate

Bacillus subtilis spores can germinate with a 1:1 chelate of Ca(2+) and dipicolinic acid (DPA), a compound present at high levels in the spore core. Using a genetic screen to identify genes encoding proteins that are specifically involved in spore germination by Ca(2+)-DPA, three mutations were identified. One was in the gene encoding the cortex lytic enzyme, CwlJ, that was previously shown to be essential for spore germination by Ca(2+)-DPA. The other two were mapped to an open reading frame, ywdL, encoding a protein of unknown function. Analysis of ywdL expression showed that the gene is expressed during sporulation in the mother cell compartment of the sporulating cell and that its transcription is sigma(E) dependent. Functional characterization of YwdL demonstrated that it is a new spore coat protein that is essential for the presence of CwlJ in the spore coat. Assembly of YwdL itself into the spore coat is dependent on the coat morphogenetic proteins CotE and SpoIVA. However, other than lacking CwlJ, ywdL spores have no obvious defect in their spore coat. Because of the role for YwdL in a part of the spore germination process, we propose renaming ywdL as a spore germination gene, gerQ.

Subcellular localization of a small sporulation protein in Bacillus subtilis

SpoVM is an unusually small (26-residue-long) protein that is produced in the mother cell chamber of the sporangium during the process of sporulation in Bacillus subtilis. We investigated the subcellular localization of SpoVM, which is believed to be an amphipathic alpha-helix, by using a fusion of the sporulation protein to the green fluorescence protein (GFP). We found that SpoVM-GFP is recruited to the polar septum shortly after the sporangium undergoes asymmetric division and that the fusion protein localizes to the mother cell membrane that surrounds the forespore during the subsequent process of engulfment. We identified a patch of three residues near the N terminus of the proposed alpha-helix that is needed both for proper subcellular localization and for SpoVM function. We also identified a patch of residues on the opposite face of the helix and residues near both ends of the protein that are needed for SpoVM function but not for subcellular localization. Subcellular localization of SpoVM-GFP was found to require an unknown gene(s) under the control of the mother cell transcription factor sigmaE. We propose that the N-terminal patch binds to an unknown anchoring protein that is produced under the control of sigmaE and that other residues important in SpoVM function to recruit an unknown sporulation protein(s) to the mother cell membrane that surrounds the forespore. Our results provide evidence that SpoVM function depends on proper subcellular localization.

Evidence that subcellular localization of a bacterial membrane protein is achieved by diffusion and capture

Bacteria lack an endoplasmic reticulum, a Golgi apparatus, and transport vesicles and yet are capable of sorting and delivering integral membrane proteins to particular sites within the cell with high precision. What is the pathway by which membrane proteins reach their proper subcellular destination in bacteria? We have addressed this question by using green fluorescent protein (GFP) fused to a polytopic membrane protein (SpoIVFB) that is involved in the process of sporulation in the bacterium Bacillus subtilis. SpoIVFB-GFP localizes to a region of the sporulating cell known as the outer forespore membrane, which is distinct from the cytoplasmic membrane. Experiments are presented that rule out a mechanism in which SpoIVFB-GFP localizes to all membranes but is selectively eliminated from the cytoplasmic membrane by proteolytic degradation and argue against a model in which SpoIVFB-GFP is selectively inserted into the outer forespore membrane. Instead, the results are most easily compatible with a model in which SpoIVFB-GFP achieves proper localization by insertion into the cytoplasmic membrane followed by diffusion to, and capture in, the outer forespore membrane. The possibility that diffusion and capture is a general feature of protein localization in bacteria is discussed.

Stability of green fluorescent protein using luminescence spectroscopy: is GFP applicable to field analysis of contaminants?

Green fluorescent protein (GFP) was first isolated in the early 1970s for experimental use from coelenterates or the Pacific jellyfish. Aequorea victoria (Morin and Hastings, 1971). GFP has since become a favored biomarker in the photophysical analysis of molecular and cell biology because of its strong intrinsic visible fluorescence and the feasibility of fusing it to other proteins without affecting their normal functions (Creemers et al., 2000). Here we report using Bacillus subtilis expressing GFP to evaluate the influence of different environmental pH conditions on GFP fluorescence. Emission acquisitions were configured to excite at 471 nm and detect at an emission from 490 to 650 nm at 1-nm increments. Fluorescence intensity was significantly better at pH 7 (4.2 x 105 cps; P-value < 0.01) than at acid or alkaline conditions. GFP is a good biomarker for environments near netural conditions: however, GFP may be unsuitable where soils or waters are below or above pH 7 because of loss in fluorescence intensity. Alternative fluorescent markers and delivery systems must be examined in different environments to optimize responses from bioreporter molecules.

A three-protein inhibitor of polar septation during sporulation in Bacillus subtilis

We present evidence for a three-protein inhibitor of polar division that locks in asymmetry after the formation of a polar septum during sporulation in Bacillus subtilis. Asymmetric division involves the formation of cytokinetic Z-rings near both poles of the developing cell. Next, a septum is formed at one of the two polar Z-rings, thereby generating a small, forespore cell and a mother cell. Gene expression under the control of the mother-cell transcription factor sigmaE is needed to block cytokinesis at the pole distal to the newly formed septum. We report that this block in polar cytokinesis is mediated partly by sigmaE-directed transcription of spoIID, spoIIM and spoIIP, sporulation genes that were known to be involved in the subsequent process of forespore engulfment. We find that a spoIID, spoIIM and spoIIP triple mutant substantially mimicked the bipolar division phenotype of a sigmaE mutant and that cells engineered to produce SpoIID, SpoIIM and SpoIIP prematurely were inhibited in septum formation at both poles. Consistent with the hypothesis that SpoIID, SpoIIM and SpoIIP function at both poles of the sporangium, a GFP--SpoIIM fusion localized to the membrane that surrounds the engulfed forespore and to the potential division site at the distal pole.

Green fluorescent protein--a bright idea for the study of bacterial protein localization

Use of the green fluorescent protein (GFP) of Aequorea victoria as a reporter for protein and DNA localization has provided sensitive, new approaches for studying the organization of the bacterial cell, leading to new insights into diverse cellular processes. GFP has many characteristics that make it useful for localization studies in bacteria, primarily its ability to fluoresce when fused to target polypeptides without the addition of exogenously added substrates. As an alternative to immunofluorescence microscopy, the expression of gfp gene fusions has been used to probe the function of cellular components fundamental for DNA replication, translation, protein export, and signal transduction, that heretofore have been difficult to study in living cells. Moreover, protein and DNA localization can now be monitored in real time, revealing that several proteins important for cell division, development and sporulation are dynamically localized throughout the cell cycle. The use of additional GFP variants that permit the labeling of multiple components within the same cell, and the use of GFP for genetic screens, should continue to make this a valuable tool for addressing complex questions about the bacterial cell.

SpoVID guides SafA to the spore coat in Bacillus subtilis

Bacteria assemble complex structures by targeting proteins to specific subcellular locations. The protein coat that encases Bacillus subtilis spores is an example of a structure that requires coordinated targeting and assembly of more than 24 polypeptides. The earliest stages of coat assembly require the action of three morphogenetic proteins: SpoIVA, CotE, and SpoVID. In the first steps, a basement layer of SpoIVA forms around the surface of the forespore, guiding the subsequent positioning of a ring of CotE protein about 75 nm from the forespore surface. SpoVID localizes near the forespore membrane where it functions to maintain the integrity of the CotE ring and to anchor the nascent coat to the underlying spore structures. However, it is not known which spore coat proteins interact directly with SpoVID. In this study we examined the interaction between SpoVID and another spore coat protein, SafA, in vivo using the yeast two-hybrid system and in vitro. We found evidence that SpoVID and SafA directly interact and that SafA interacts with itself. Immunofluorescence microscopy showed that SafA localized around the forespore early during coat assembly and that this localization of SafA was dependent on SpoVID. Moreover, targeting of SafA to the forespore was also dependent on SpoIVA, as was targeting of SpoVID to the forespore. We suggest that the localization of SafA to the spore coat requires direct interaction with SpoVID.

The Bacillus subtilis yabQ gene is essential for formation of the spore cortex

An extensive screening for transcripts with probes specific for the genes in a 108 kb region from rrnO to spo0H of the Bacillus subtilis chromosome led to identification of an operon, yabP--yabQ--divIC--yabR, the expression of which was initiated at the second hour of sporulation and in a sigma(E)-dependent manner. Among three y genes in the operon, deletion of the yabQ gene, which is predicted to encode a protein product of 468 residues with five membrane-spanning domains, resulted in a large decrease in numbers of chloroform-, lysozyme- and heat-resistant spores, compared to findings with the wild-type strain. Electron microscopy revealed that development of the spore cortex was blocked in the yabQ mutant. In addition, although the spore coat was visible, the inner coat layer of the mutant seemed partially detached from the outer coat. In sporangia of the strains harbouring an in-frame fusion of the green fluorescent protein gene to yabQ, fluorescence was detected around the forespore. This localization did not depend on SpoIVA or on CotE functions, both of which determine proper localization of coat proteins and cortex formation. The yabQ deletion did not affect expression of genes involved in cortex synthesis. These results suggest that the YabQ protein localizes in the membrane of the forespore and plays an important role in cortex formation.