Utilization of electrically reduced neutral red by Actinobacillus succinogenes: physiological function of neutral red in membrane-driven fumarate reduction and energy conservation

Chemoorganotrophic electrofermentation by Cupriavidus necator using redox mediators

The non-pathogenic β-proteobacterium Cupriavidus necator has the ability to switch between chemoorganotrophic, chemolithoautotrophic and electrotrophic growth modes, making this microorganism a widely used host for cellular bioprocesses. Oxygen usually acts as the terminal electron acceptor in all growth modes. However, several challenges are associated with aeration, such as foam formation, oxygen supply costs, and the formation of an explosive gas mixture in chemolithoautotrophic cultivation with H2, CO2 and O2. Bioelectrochemical systems in which O2 is replaced by an electrode as a terminal electron acceptor offer a promising solution to these problems. The aim of this study was to establish a mediated electron transfer between the anode and the metabolism of living cells, i.e. anodic respiration, using fructose as electron and carbon source. Since C. necator is not able to transfer electrons directly to an electrode, redox mediators are required for this process. Based on previous observations on the extracellular electron transfer enabled by a polymeric mediator, we tested 11 common biological and non-biological redox mediators for their functionality and inhibitory effect for anodic electron transfer in a C. necator-based bioelectrochemical system. The use of ferricyanide at a concentration of 15 mM resulted in the highest current density of 260.75µAcm-2 and a coulombic efficiency of 64.1 %.

Recent Developments and Applications of Microbial Electrochemical Biosensors

This chapter provides a comprehensive overview of microbial electrochemical biosensors, which are a unique class of biosensors that utilize the metabolic activity of microorganisms to convert chemical signals into electrical signals. The principles and mechanisms of these biosensors are discussed, including the different types of microorganisms that can be used. The various applications of microbial electrochemical biosensors in fields such as environmental monitoring, medical diagnostics, and food safety are also explored. The chapter concludes with a discussion of future research directions and potential advancements in the field of microbial electrochemical biosensors.

Bioelectrocatalytic Synthesis: Concepts and Applications

Bioelectrocatalytic synthesis is the conversion of electrical energy into value-added products using biocatalysts. These methods merge the specificity and selectivity of biocatalysis and energy-related electrocatalysis to address challenges in the sustainable synthesis of pharmaceuticals, commodity chemicals, fuels, feedstocks and fertilizers. However, the specialized experimental setups and domain knowledge for bioelectrocatalysis pose a significant barrier to adoption. This review introduces key concepts of bioelectrosynthetic systems. We provide a tutorial on the methods of biocatalyst utilization, the setup of bioelectrosynthetic cells, and the analytical methods for assessing bioelectrocatalysts. Key applications of bioelectrosynthesis in ammonia production and small-molecule synthesis are outlined for both enzymatic and microbial systems. This review serves as a necessary introduction and resource for the non-specialist interested in bioelectrosynthetic research.

Power generation from wastewater using microbial fuel cells: A review

As the world grapples with an imminent energy crisis brought on by the depletion of nonrenewable resources, such as petroleum, the necessity for alternative and eco-friendly power sources becomes increasingly apparent. In this regard harnessing knowledge gained from natural microorganisms to produce electricity using economical substrates is a promising solution through microbial fuel cells (MFCs). Microbial fuel cells leverage microbes' catabolic abilities to break down organic matter and release electrons that are subsequently transported across an external circuit for electricity generation. This article delves into the fundamental components involved in MFC construction and explores crucial factors that impact their performance including substrate oxidation, electron transfer, and internal resistance. Additionally, it offers a comprehensive analysis of existing microbial fuel cell designs while highlighting their respective strengths and weaknesses. Finally, the article showcases cost-effective MFC models based on thorough studies conducted worldwide while illuminating potential practical applications of this renewable energy technology.

Putting the electro-bugs to work: A systematic review of 22 years of advances in bio-electrochemical systems and the parameters governing their performance

Wastewater treatment using bioelectrochemical systems (BESs) can be considered as a technology finding application in versatile areas such as for renewable energy production and simultaneous reducing environmental problems, biosensors, and bioelectrosynthesis. This review paper reports and critically discusses the challenges, and advances in bio-electrochemical studies in the 21st century. To sum and critically analyze the strides of the last 20+ years on the topic, this study first provides a comprehensive analysis on the structure, performance, and application of BESs, which include Microbial Fuel Cells (MFCs), Microbial Electrolysis Cells (MECs) and Microbial Desalination Cells (MDCs). We focus on the effect of various parameters, such as electroactive microbial community structure, electrode material, configuration of bioreactors, anode unit volume, membrane type, initial COD, co-substrates and the nature of the input wastewater in treatment process and the amount of energy and fuel production, with the purpose of showcasing the modes of operation as a guide for future studies. The results of this review show that the BES have great potential in reducing environmental pollution, purifying saltwater, and producing energy and fuel. At a larger scale, it aspires to facilitate the path of achieving sustainable development and practical application of BES in real-world scenarios.

Reduced acetic acid formation using NaHSO3 as a steering agent by Actinobacillus succinogenes GXAS137

The high production of acetic acid (AC) as a by-product leads to difficult separation and purification of succinic acid (SA) and increases production costs in SA fermentation by Actinobacillus succinogenes. NaHSO₃ as a steering agent was used to reduce AC production. Herein, the optimum fermentation conditions were achieved by single-factor and orthogonal tests as follows: glucose 60 g/L; MgCO₃ 60 g/L; NaHSO₃ 0.15% (w/v); and NaHSO₃ addition time, 8 h after inoculation. After optimization, the SA and AC contents were 44.42 and 5.73 g/L. The SA improved by 100.72%, the AC decreased by 21.18% compared with the unfermented. The acetate kinase activity decreased by 14.36% and acetyl-CoA content improved by 97.55% in the group of NaHSO₃ addition compared with control check (CK). The mechanism of NaHSO₃ is formation acetaldehyde-sodium bisulfite compound and reduction the activity of acetate kinase. These findings indicated a new way of using NaHSO₃ as a steering agent to reduce AC generation and may help promote the development of SA industrial production.

Electron shuttles enhanced the removal of antibiotics and antibiotic resistance genes in anaerobic systems: A review

The environmental and epidemiological problems caused by antibiotics and antibiotic resistance genes have attracted a lot of attention. The use of electron shuttles based on enhanced extracellular electron transfer for anaerobic biological treatment to remove widespread antibiotics and antibiotic resistance genes efficiently from wastewater or organic solid waste is a promising technology. This paper reviewed the development of electron shuttles, described the mechanism of action of different electron shuttles and the application of enhanced anaerobic biotreatment with electron shuttles for the removal of antibiotics and related genes. Finally, we discussed the current issues and possible future directions of electron shuttle technology.

An Overview of Emerging Cyanide Bioremediation Methods

Cyanide compounds are hazardous compounds which are extremely toxic to living organisms, especially free cyanide in the form of hydrogen cyanide gas (HCN) and cyanide ion (CN−). These cyanide compounds are metabolic inhibitors since they can tightly bind to the metals of metalloenzymes. Anthropogenic sources contribute significantly to CN− contamination in the environment, more specifically to surface and underground waters. The treatment processes, such as chemical and physical treatment processes, have been implemented. However, these processes have drawbacks since they generate additional contaminants which further exacerbates the environmental pollution. The biological treatment techniques are mostly overlooked as an alternative to the conventional physical and chemical methods. However, the recent research has focused substantially on this method, with different reactor configurations that were proposed. However, minimal attention was given to the emerging technologies that sought to accelerate the treatment with a subsequent resource recovery from the process. Hence, this review focuses on the recent emerging tools that can be used to accelerate cyanide biodegradation. These tools include, amongst others, electro-bioremediation, anaerobic biodegradation and the use of microbial fuel cell technology. These processes were demonstrated to have the possibility of producing value-added products, such as biogas, co-factors of neurotransmitters and electricity from the treatment process.

Complete genome sequence of Pseudomonas stutzeri S116 owning bifunctional catalysis provides insights into affecting performance of microbial fuel cells

Background

Pseudomonas stutzeri S116 is a sulfur-oxidizing bacteria isolated from marine sludge. It exhibited excellent electricity generation as bioanode and biocathode applied in microbial fuel cells (MFCs). Complete genome sequencing of P. stutzeri and cyclic voltammetry method were performed to reveal its mechanism in microbial fuel cells system.

Results

This study indicated that the MFCs generated a maximum output voltage of 254.2 mV and 226.0 mV, and maximum power density of 765 mW/m² and 656.6 mW/m² respectively. Complete genome sequencing of P. stutzeri S116 was performed to indicate that most function genes showed high similarities with P. stutzeri, and its primary annotations were associated with energy production and conversion (6.84%), amino acid transport and metabolism (6.82%) and inorganic ion transport and metabolism (6.77%). Homology of 36 genes involved in oxidative phosphorylation was detected, which suggests the strain S116 possesses an integrated electron transport chain. Additionally, many genes encoding pilus-assembly proteins and redox mediators (riboflavin and phenazine) were detected in the databases. Thiosulfate oxidization and dissimilatory nitrate reduction were annotated in the sulfur metabolism pathway and nitrogen metabolism pathway, respectively. Gene function analysis and cyclic voltammetry indicated that P. stutzeri probably possesses cellular machinery such as cytochrome c and redox mediators and can perform extracellular electron transfer and produce electricity in MFCs.

Conclusion

The redox mediators secreted by P. stutzeri S116 were probably responsible for performance of MFCs. The critical genes and metabolic pathways involved in thiosulfate oxide and nitrate reduction were detected, which indicated that the strain can treat wastewater containing sulfide and nitrite efficiently.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12866-022-02552-8.

Proton-Coupled Electron Transfer: The Engine of Energy Conversion and Storage

Proton-coupled electron transfer (PCET) underpins energy conversion in chemistry and biology. Four energy systems are described whose discoveries are based on PCET: the water splitting chemistry of the Artificial Leaf, the carbon fixation chemistry of the Bionic Leaf-C, the nitrogen fixation chemistry of the Bionic Leaf-N and the Coordination Chemistry Flow Battery (CCFB). Whereas the Artificial Leaf, Bionic Leaf-C, and Bionic Leaf-N require strong coupling between electron and proton to reduce energetic barriers to enable high energy efficiencies, the CCFB requires complete decoupling of the electron and proton so as to avoid parasitic energy-wasting reactions. The proper design of PCET in these systems facilitates their implementation in the areas of (i) centralized large scale grid storage of electricity and (ii) decentralized energy storage/conversion using only sunlight, air and any water source to produce fuel and food within a sustainable cycle for the biogenic elements of C, N and P.

Bioelectrosynthesis systems

Bioelectrosynthesis (BES) systems exploit extracellular electron transport pathways to augment cellular metabolism. This strategy can be used to improve the economic viability of bio-based syntheses versus conventional methods, most notably petrochemical-based syntheses. It also has the potential to reduce the carbon footprint of biomanufacturing processes. Efficient channeling of cathode-derived electrons towards biosynthesis requires a better understanding of the biological mechanisms of electron transport as well as detailed evaluation of all aspects of process performance. More advanced solutions may deploy cell free systems that use ex situ generated reducing equivalents to improve economic performance.

Reactor Designs and Configurations for Biological and Bioelectrochemical C1 Gas Conversion: A Review

Microbial C1 gas conversion technologies have developed into a potentially promising technology for converting waste gases (CO₂, CO) into chemicals, fuels, and other materials. However, the mass transfer constraint of these poorly soluble substrates to microorganisms is an important challenge to maximize the efficiencies of the processes. These technologies have attracted significant scientific interest in recent years, and many reactor designs have been explored. Syngas fermentation and hydrogenotrophic methanation use molecular hydrogen as an electron donor. Furthermore, the sequestration of CO₂ and the generation of valuable chemicals through the application of a biocathode in bioelectrochemical cells have been evaluated for their great potential to contribute to sustainability. Through a process termed microbial chain elongation, the product portfolio from C1 gas conversion may be expanded further by carefully driving microorganisms to perform acetogenesis, solventogenesis, and reverse β-oxidation. The purpose of this review is to provide an overview of the various kinds of bioreactors that are employed in these microbial C1 conversion processes.

Exogenous electron transfer mediator enhancing gaseous toluene degradation in a microbial fuel cell: Performance and electron transfer mechanism

Effective electron transfer (ET) between microorganisms and electrodes is essential for the toluene degradation and power generation in a microbial fuel cell (MFC). In this work, the neutral red, with excellent electrochemical reversibility and compatible redox potential as NADH/NAD⁺, was selected as electron mediator to boost the performance of the MFC. Experimental results revealed that, with the 0.5 μM neutral red, the removal efficiency and coulombic efficiency of the gaseous toluene powered MFC was increased by ~19% and ~400%, respectively. However, further increase in neutral red concentration resulted in a decreased in removal efficiency and coulombic efficiency, which was attributed by the toxicity of neutral red to the microbes. The microbial community analysis indicated that, with the dosage of the neutral red, the dominated bacteria shifted from Geobacter to Ignavibacteriales, resulting in a high coulombic efficiency. With the further increase in the neutral red, the amount of Ignavibacteriales gradually decreased and thus the coulombic efficiency declined at a high neutral red concentration. Based on the cyclic voltammetry analysis, an electron transport pathway involving neutral red, cytochromes, and OMCs in neutral red mediated MFC was proposed. Overall, the dosage of neutral not only enhanced the electron transfer but also induced the growth of the exoelectrogens, and thus significantly improve the MFC performance.

Nitrate Reduction Stimulates and Is Stimulated by Phenazine-1-Carboxylic Acid Oxidation by Citrobacter portucalensis MBL

Phenazines are secreted metabolites that microbes use in diverse ways, from quorum sensing to antimicrobial warfare to energy conservation. Phenazines are able to contribute to these activities due to their redox activity. The physiological consequences of cellular phenazine reduction have been extensively studied, but the counterpart phenazine oxidation has been largely overlooked. Phenazine-1-carboxylic acid (PCA) is common in the environment and readily reduced by its producers. Here, we describe its anaerobic oxidation by Citrobacter portucalensis strain MBL, which was isolated from topsoil in Falmouth, MA, and which does not produce phenazines itself. This activity depends on the availability of a suitable terminal electron acceptor, specifically nitrate. When C. portucalensis MBL is provided reduced PCA and nitrate, it oxidizes the PCA at a rate that is environmentally relevant. We compared this terminal electron acceptor-dependent PCA-oxidizing activity of C. portucalensis MBL to that of several other gammaproteobacteria with various capacities to respire nitrate. We found that PCA oxidation by these strains in a nitrate-dependent manner is decoupled from growth and strain dependent. We infer that bacterial PCA oxidation is widespread and genetically determined. Notably, oxidizing PCA enhances the rate of nitrate reduction to nitrite by C. portucalensis MBL beyond the stoichiometric exchange of electrons from PCA to nitrate, which we attribute to C. portucalensis MBL’s ability to also reduce oxidized PCA, thereby catalyzing a complete PCA redox cycle. This bidirectionality highlights the versatility of PCA as a biological redox agent.

Tuning Redox Potential of Anthraquinone-2-Sulfonate (AQS) by Chemical Modification to Facilitate Electron Transfer From Electrodes in Shewanella oneidensis

Bioelectrochemical systems (BESs) are emerging as attractive routes for sustainable energy generation, environmental remediation, bio-based chemical production and beyond. Electron shuttles (ESs) can be reversibly oxidized and reduced among multiple redox reactions, thereby assisting extracellular electron transfer (EET) process in BESs. Here, we explored the effects of 14 ESs on EET in Shewanella oneidensis MR-1, and found that anthraquinone-2-sulfonate (AQS) led to the highest cathodic current density, total charge production and reduction product formation. Subsequently, we showed that the introduction of -OH or -NH₂ group into AQS at position one obviously affected redox potentials. The AQS-1-NH₂ exhibited a lower redox potential and a higher Coulombic efficiency compared to AQS, revealing that the ESs with a more negative potential are conducive to minimize energy losses and improve the reduction of electron acceptor. Additionally, the cytochromes MtrA and MtrB were required for optimal AQS-mediated EET of S. oneidensis MR-1. This study will provide new clues for rational design of efficient ESs in microbial electrosynthesis.

Identifying Energy Extraction Optimisation Strategies of Actinobacillus succinogenes

A. succinogenes is well known for utilising various catabolic pathways. A multitude of batch fermentation studies confirm flux shifts in the catabolism as time proceeds. It has also been shown that continuous cultures exhibit flux variation as a function of dilution rate. This indicates a direct influence of the external environment on the proteome of the organism. In this work, ATP production efficiency was explored to evaluate the extent of bio-available energy on the production behaviour of A. succinogenes. It was found that the microbe successively utilised its most-to-least efficient energy extraction pathways, providing evidence of an energy optimisation survival strategy. Moreover, data from this study suggest a pyruvate overflow mechanism as a means to throttle acetic and formic acid production, indicating a scenario in which the external concentration of these acids play a role in the energy extraction capabilities of the organism. Data also indicates a fleeting regime where A. succinogenes utilises an oxidised environment to its advantage for ATP production. Here it is postulated that the energy gain and excretion cost of catabolites coupled to the changing environment is a likely mechanism responsible for the proteome alteration and its ensuing carbon flux variation. This offers valuable insights into the microbe’s metabolic logic gates, providing a foundation to understand how to exploit the system.

A neutral red mediated electro-fermentation system of Clostridium beijerinckii for effective co-production of butanol and hydrogen

To enhance the co-production of butanol and hydrogen by the acetone-butanol-ethanol (ABE) fermentation of Clostridium beijerinckii, a novel cathodic electro-fermentation (CEF) system was constructed with neutral red (NR) as electron mediator. With the mediation of NR, production of butanol and hydrogen from glucose in the CEF system achieved 5.49 ± 0.28 g/L and 3.74 ± 0.16 L/L, 569.5% and 325.0% higher than that in the open circuit (OC) system, respectively. The butanol and hydrogen yield of 0.30 ± 0.02 g/g and 206.53 ± 8.20 mL/g was 172.7% and 71.4% higher than that in the OC system, respectively. The effective co-production of butanol and hydrogen in the NR-mediated CEF system was attributed to the cooperation of the introduced polarized electrode and the additional NR. With the control of the polarized electrode, a feasible ORP was available for the effective hydrogen production. And the additional NR had induced more carbon source and electrons to the synthesis of butanol.

A cathodic electro-fermentation system for enhancing butyric acid production from rice straw with a mixed culture

Bio-electrochemical system (BES) emerges as a versatile approach to handling environmental problems with the harvest of sustainable energy and value-added chemicals. To enhance the butyric acid production from rice straw, microbial fuel cell (MFC) and cathodic electro-fermentation (CEF) systems were constructed in this study. Inoculated with the same mixed culture, fermentative butyric acid production efficiency of the two BESs were evaluated with/without neutral red (NR) as electron mediator, respectively. It was found that the butyric acid fermentation efficiency in the MFC system was inefficient. While, the CEF system presented an evident positive effect on butyric acid production. The production and specific yield of butyric acid in the CEF system reached 5.54 g/L and 0.41 g/g, higher than that in the open circuit (OC) system by 17.37% and 28.13%, respectively. Mass percentage of butyric acid in the produced total volatile fatty acids (VFAs) was also increased from 44.74% to 52.76%. The addition of NR had no positive effect on the butyric acid production, due to the low contribution of electric current to the end-products. With the cathode potential of -0.80 V (vs Ag/AgCl), relative abundance of the butyric acid fermenting bacteria (Clostridium cluster IV and cluster XIVa) in the microbial mixture was increased from 20.25% in the OC system to 33.61% in the CEF system. This research work not only presents a novel method for enhancing butyric acid production by rice straw fermentation, but also aids an understanding of the fermentation mechanism in CEF systems.

NADPH performs mediated electron transfer in cyanobacterial-driven bio-photoelectrochemical cells

Previous studies have shown that live cyanobacteria can produce photocurrent in bio-photoelectrochemical cells (BPECs) that can be exploited for clean renewable energy production. Electron transfer from cyanobacteria to the electrochemical cell was proposed to be facilitated by small molecule(s) mediator(s) whose identity (or identities) remain unknown. Here, we elucidate the mechanism of electron transfer in the BPEC by identifying the major electron mediator as NADPH in three cyanobacterial species. We show that an increase in the concentration of NADPH secreted into the external cell medium (ECM) is obtained by both illumination and activation of the BPEC. Elimination of NADPH in the ECM abrogates the photocurrent while addition of exogenous NADP⁺ significantly increases and prolongs the photocurrent production. NADP⁺ is thus the first non-toxic, water soluble electron mediator that can functionally link photosynthetic cells to an energy conversion system and may serve to improve the performance of future BPECs.

•

NADPH is the electron mediator in cyanobacterial bio-photoelectrochemical cells

•

Operation of the electrochemical cell induces NADPH release from cyanobacteria

•

Addition of exogenous NADP⁺ to cyanobacteria enhances photocurrent production

•

NADPH is released by different fresh or sea water cyanobacterial species

Enhanced microbial fuel cell (MFC) power outputs through Membrane Permeabilization using a branched polyethyleneimine

This study demonstrates the impact outer membrane permeability has on the power densities generated by E. coli-based microbial fuel cells with neutral red as the mediator, and how increasing the permeability improves the current generation. Experiments performed with several lipopolysaccharide (LPS) mutants (ΔwaaC, ΔwaaF and ΔwaaG) of E. coli BW25113 that increase the outer membrane permeability found the power generated by two of the truncated LPS mutants, i.e., ΔwaaC and ΔwaaF, to be significantly higher (5.6 and 6.9 mW/m², respectively) than that of the wild-type E. coli BW25113 (2.6 mW/m²). Branched polyethyleneimine (BPEI, 400 mg/L), a strong chemical permeabilizer, was more effective, however, increasing the power output from E. coli BW25113 cultures to as much as 29.7 mW/m², or approximately 11-fold higher than the control MFC. BPEI also increased the activities of the mutant strains (to between 10.6 and 16.3 mW/m²), as well as when benzyl viologen was the mediator. Additional tests found BPEI not only enhanced membrane permeability but also increased the zeta potential of the bacterial cells from a value of -43.4 mV to -21.0 mV. This led to a significant increase in auto-aggregation of the bacterial cells and, consequently, better adherence of the cells to the anode electrode, as was demonstrated using scanning electron microscopy. In conclusion, our study demonstrates the importance of outer membrane permeabilities on MFC performances and defines two benefits that BPEI offers when used within MFCs as an outer membrane permeabilizer.

Surface Analysis of Coal Indicating Neutral Red Enhances the Precursor Steps of Methanogenesis

Artificially stimulated, high-yield microbial production of methane from coal is a challenging problem that continues to generate research interest. Decomposition of organic matter and production of methane from coal are the results of multiple redox reactions carried out by different communities of bacteria and archaea. Recent work by our group (Beckmann et al., 2015) demonstrated that the presence of the redox-mediating molecule neutral red, in its crystalline form on a coal surface, can increase methane production. However, hydrolysis and the acetogenesis of the coal surface are essential precursor steps for methane production by archaea. Acetogenesis is the preparation phase of methanogenesis because methanogens can only assimilate acetate, CO₂ and H₂ among the products formed during this process. In the present study, the surface chemical analysis of neutral red treated coal using attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) demonstrate that the acetate production and resulting oxidation of the coal only occurred at few nanometers into the coal surface (at the nanoscale <5 nm). We observed that in the presence of neutral red and groundwater microbes, acetate signals in coal surface chemistry increased. This is the first evidence suggesting that neutral red enhances the biological conversion of coal into acetate. Microscopy demonstrated that neutral red crystals were co-localize with cells at the surface of coal in groundwater. This is consistent with neutral red crystals serving as a redox hub, concentrating and distributing reducing equivalents amongst the microbial community. In this study, the chemical changes of neutral red treated coal indicated that neutral red doubles the concentration of acetate over the control (coal without neutral red), emphasizing the importance of maximizing the fracture surface coverage of this redox mediator. Overall, results suggested that, neutral red not only can benefit acetoclastic methanogens, but also the fermentative and acetogenic bacteria involved in generating acetate.

Bioelectrochemical degradation of monoaromatic compounds: Current advances and challenges

Monoaromatic compounds (MACs) are typical refractory organic pollutants which are existing widely in various environments. Biodegradation strategies are benign while the key issue is the sustainable supply of electron acceptors/donors. Bioelectrochemical system (BES) shows great potential in this field for providing continuous electrons for MACs degradation. Phenol and BTEX (Benzene, Toluene, Ethylbenzene and Xylenes) can utilize anode to enhance oxidative degradation, while chlorophenols, nitrobenzene and antibiotic chloramphenicol (CAP) can be efficiently reduced to less-toxic products by the cathode. However, there still have several aspects need to be improved including the scale, electricity output and MACs degradation efficiency of BES. This review provides a comprehensive summary on the BES degradation of MACs, and discusses the advantages, future challenges and perspectives for BES development. Instead of traditional expensive dual-chamber configurations for MACs degradation, new single-chamber membrane-less reactors are cost-effective and the hydrogen generated from cathodes may promote the anode degradation. Electrode materials are the key to improve BES performance, approaches to increase the biofilm enrichment and conductivity of materials have been discussed, including surface modification as well as composition of carbon and metal-based materials. Besides, the development and introduction of functional microbes and redox mediators, participation of sulfur/hydrogen cycling may further enhance the BES versatility. Some critical parameters, such as the applied voltage and conductivity, can also affect the BES performance, which shouldn't be overlooked. Moreover, sequential cathode-anode cascaded mode is a promising strategy for MACs complete mineralization.

A Comprehensive Understanding of Electro-Fermentation

Electro-fermentation (EF) is an upcoming technology that can control the metabolism of exoelectrogenic bacteria (i.e., bacteria that transfer electrons using an extracellular mechanism). The fermenter consists of electrodes that act as sink and source for the production and movement of electrons and protons, thus generating electricity and producing valuable products. The conventional process of fermentation has several drawbacks that restrict their application and economic viability. Additionally, metabolic reactions taking place in traditional fermenters are often redox imbalanced. Almost all metabolic pathways and microbial strains have been studied, and EF can electrochemically control this. The process of EF can be used to optimize metabolic processes taking place in the fermenter by controlling the redox and pH imbalances and by stimulating carbon chain elongation or breakdown to improve the overall biomass yield and support the production of a specific product. This review briefly discusses microbe-electrode interactions, electro-fermenter designs, mixed-culture EF, and pure culture EF in industrial applications, electro methanogenesis, and the various products that could be hence generated using this process.

Redox governed electro-fermentation improves lipid production by the oleaginous yeast Rhodosporidium toruloides

Electro-fermentation (EF) is a promising technique to increase the performance of bioprocesses. Here, the effect of EF on the lipid production by the yeast Rhodosporidium toruloides is studied. First, an in silico analysis was performed to unveil possible lipid yield increase and metabolic shifts by EF. Subsequently, cathodic EF (CEF) and anodic EF (AEF) were experimentally tested at different pO₂ levels. CEF enabled artificial lowering of the extracellular redox potential to less than -200 mV even under strictly aerobic conditions. CEF and AEF both positively affected lipid yield and productivity. Additional CEF cultivations with the redox mediator Neutral Red yielded an immense increase in the ratio of saturated fatty acids (from 37% to 50%). Overall, this work demonstrates that EF offers broad potential to improve microbial lipid production. In this context, the use of redox mediators might be of special future interest for the production of cocoa-butter equivalents.

Reversing an Extracellular Electron Transfer Pathway for Electrode-Driven Acetoin Reduction

Microbial electrosynthesis is an emerging technology with the potential to simultaneously store renewably generated energy, fix carbon dioxide, and produce high-value organic compounds. However, limited understanding of the route of electrons into the cell remains an obstacle to developing a robust microbial electrosynthesis platform. To address this challenge, we leveraged the native extracellular electron transfer pathway in Shewanella oneidensis MR-1 to connect an extracellular electrode with an intracellular reduction reaction. The system uses native Mtr proteins to transfer electrons from an electrode to the inner membrane quinone pool. Subsequently, electrons are transferred from quinones to NAD⁺ by native NADH dehydrogenases. This reverse functioning of NADH dehydrogenases is thermodynamically unfavorable; therefore, we added a light-driven proton pump (proteorhodopsin) to generate proton-motive force to drive this activity. Finally, we use reduction of acetoin to 2,3-butanediol via a heterologous butanediol dehydrogenase (Bdh) as an electron sink. Bdh is an NADH-dependent enzyme; therefore, observation of acetoin reduction supports our hypothesis that cathodic electrons are transferred to intracellular NAD⁺. Multiple lines of evidence indicate proper functioning of the engineered electrosynthesis system: electron flux from the cathode is influenced by both light and acetoin availability, and 2,3-butanediol production is highest when both light and a poised electrode are present. Using a hydrogenase-deficient S. oneidensis background strain resulted in a stronger correlation between electron transfer and 2,3-butanediol production, suggesting that hydrogen production is an off-target electron sink in the wild-type background. This system represents a promising step toward a genetically engineered microbial electrosynthesis platform and will enable a new focus on synthesis of specific compounds using electrical energy.

Engineering an electroactive Escherichia coli for the microbial electrosynthesis of succinate from glucose and CO2

BACKGROUND

Electrochemical energy is a key factor of biosynthesis, and is necessary for the reduction or assimilation of substrates such as CO₂. Previous microbial electrosynthesis (MES) research mainly utilized naturally electroactive microbes to generate non-specific products.

RESULTS

In this research, an electroactive succinate-producing cell factory was engineered in E. coli T110(pMtrABC, pFccA-CymA) by expressing mtrABC, fccA and cymA from Shewanella oneidensis MR-1, which can utilize electricity to reduce fumarate. The electroactive T110 strain was further improved by incorporating a carbon concentration mechanism (CCM). This strain was fermented in an MES system with neutral red as the electron carrier and supplemented with HCO₃⁺, which produced a succinate yield of 1.10 mol/mol glucose-a 1.6-fold improvement over the parent strain T110.

CONCLUSIONS

The strain T110(pMtrABC, pFccA-CymA, pBTCA) is to our best knowledge the first electroactive microbial cell factory engineered to directly utilize electricity for the production of a specific product. Due to the versatility of the E. coli platform, this pioneering research opens the possibility of engineering various other cell factories to utilize electricity for bioproduction.

Electricity-driven 7α-hydroxylation of a steroid catalyzed by a cytochrome P450 monooxygenase in engineered yeast

Schematic diagram of the cytochrome P450 monooxygenase-catalyzed BES.

Fast-Response Flexible Photochromic Gels for Self-Erasing Rewritable Media and Colorimetric Oxygen Indicator Applications

Photoreversible color switching that can change colors with fast response and high stability is urgently desired in color-on-demand applications. Yet, developing such materials has long been a significant challenge. In this work, a strategy based on the integration of TiO₂ nanoparticle (NP) photocatalytic color switching of redox dyes and poly(vinyl alcohol) gel matrix could produce robust and flexible photochromic gels (FPGs) that exhibit fast light-responsive time and high photoreversible stability. Benefited by the soft network structures and monomeric form of redox dyes in the FPG maintained by poly(vinyl alcohol) and ethylene glycol molecules, as well as enhanced photoreductive activity of TiO₂ NPs modified by both surface ligands and oxygen vacancies, the FPG exhibits long photoreversible switching cycles (≥50 times), decoloration in a short period of less than 8 s upon UV illumination, and recoloration in 16 min in ambient air and rapidly in 140 s upon near-infrared light illumination. Consequently, the excellent photoreversible color switching of the FPGs is highly applicable as both self-erasing rewritable media and colorimetric oxygen indicators. We believe that the current systems represent a big step forward toward practical applications, such as time-sensitive information storage, colorimetric oxygen sensor, and potentially many other technologies.

Opportunities, challenges, and future perspectives of succinic acid production by Actinobacillus succinogenes

Due to environmental issues and the depletion of fossil-based resources, ecofriendly sustainable biomass-based chemical production has been given more attention recently. Succinic acid (SA) is one of the top value added bio-based chemicals. It can be synthesized through microbial fermentation using various waste steam bioresources. Production of chemicals from waste streams has dual function as it alleviates environmental concerns; they could have caused because of their improper disposal and transform them into valuable products. To date, Actinobacillus succinogenes is termed as the best natural SA producer. However, few reviews regarding SA production by A. succinogenes were reported. Herewith, pathways and metabolic engineering strategies, biomass pretreatment and utilization, and process optimization related with SA fermentation by A. succinogenes were discussed in detail. In general, this review covered vital information including merits, achievements, progresses, challenges, and future perspectives in SA production using A. succinogenes. Therefore, it is believed that this review will provide platform to understand the potential of the strain and tackle existing hurdles so as to develop superior strain for industrial applications. It will also be used as a baseline for identification, isolation, and improvement of other SA-producing microbes.

Comparison of the enzymatic efficiency of Liberase TM and tumor dissociation enzyme: effect on the viability of cells digested from fresh and cryopreserved human ovarian cortex

BACKGROUND

The aim of this study was to examine the effectiveness of Tumor Dissociation Enzyme (TDE) on the viability of follicles after digestion of fresh and cryopreserved ovarian cortex fragments (OCFs).

METHODS

Fresh and thawed OCF from 14 patients (29 ± 6 years), sized 20 to 210 mm³ were randomly distributed into four treatment groups and digested with 16% TDE or 0.05 mg/ml Liberase TM: Group 1, frozen OCF digested with TDE; Group 2, frozen OCF digested with LiberaseTM; Group 3, fresh OCF digested with TDE; and Group 4, fresh OCF digested with Liberase TM. Evaluation of follicle viability was performed under light microscope after staining with Neutral red. For visualization of viable and dead cells under a confocal laser scanning microscope, the follicles were stained with Calcein AM and ethidium homodimer-1.

RESULTS

The results showed that the number of retrieved follicles was significantly higher (990 vs 487; P < 0.01) in the TDE-treatment group compared to the Liberase TM-group. The presence of intense neutral red stained follicles was significantly higher in Group 1 and Group 3 compared to Group 2 and Group 4 (70.3% ± +/- 6.22 vs 53,1% ± 2.03 and 94.2% ± 6.6 vs 79.1% ± 2.1; P < 0.01). The percentage of Calcein AM stained follicles of class V1 was significantly higher in Group 1 and Group 3 compared to Group 2 and Group 4 (95.97% ± 7.8 vs 87.87% ± 2.4; 97.1% ± 6.8 vs 91.3% ± 2.3; P < 0.01).

CONCLUSION

The enzymatic digestion of ovarian cortex with TDE provides recovery of a higher number of healthy preantral follicles in contrast to earlier described Liberase TM procedure.

A genetic approach for microbial electrosynthesis system as biocommodities production platform

Microbial electrosynthesis is a process that can produce biocommodities from the reduction of substrates with microbial catalysts and an external electron supply. This process is expected to become a new application of a cell factory for novel chemical production, wastewater treatment, and carbon capture and utilization. However, microbial electrosynthesis is still subject to several problems that need to be overcome for commercialization, so continuous development such as metabolic engineering is essential. The development of microbial electrosynthesis can open up new opportunities for sustainable biocommodities production platforms. This review provides significant information on the current state of MES development, focusing on extracellularly electron transfer and metabolic engineering.

Anthraquinone-2-sulfonate immobilized to conductive polypyrrole hydrogel as a bioanode to enhance power production in microbial fuel cell

In this study, anthraquinone-2-sulfonate (AQS), a redox mediator, was covalently bound to conductive polypyrrole hydrogel (CPH) via electrochemical reduction of the in-situ-generated AQS diazonium salts. The porous structure and hydrophilic surface of this CPH/AQS anode enhanced biofilm formation while the AQS bound on the CPH/AQS anode worked as a redox mediator. The CPH/AQS bioanode reduced the charge transfer resistance from 28.3Ω to 4.1Ω while increased the maximum power density from 762±37mW/m² to 1919±69mW/m², compared with the bare anode. These results demonstrated that the facile synthesis of the CPH/AQS anode provided an efficient route to enhance the power production of microbial fuel cell (MFC).

Microbial Fuels Cell-Based Biosensor for Toxicity Detection: A Review

With the unprecedented deterioration of environmental quality, rapid recognition of toxic compounds is paramount for performing in situ real-time monitoring. Although several analytical techniques based on electrochemistry or biosensors have been developed for the detection of toxic compounds, most of them are time-consuming, inaccurate, or cumbersome for practical applications. More recently, microbial fuel cell (MFC)-based biosensors have drawn increasing interest due to their sustainability and cost-effectiveness, with applications ranging from the monitoring of anaerobic digestion process parameters (VFA) to water quality detection (e.g., COD, BOD). When a MFC runs under correct conditions, the voltage generated is correlated with the amount of a given substrate. Based on this linear relationship, several studies have demonstrated that MFC-based biosensors could detect heavy metals such as copper, chromium, or zinc, as well as organic compounds, including p-nitrophenol (PNP), formaldehyde and levofloxacin. Both bacterial consortia and single strains can be used to develop MFC-based biosensors. Biosensors with single strains show several advantages over systems integrating bacterial consortia, such as selectivity and stability. One of the limitations of such sensors is that the detection range usually exceeds the actual pollution level. Therefore, improving their sensitivity is the most important for widespread application. Nonetheless, MFC-based biosensors represent a promising approach towards single pollutant detection.