oriT-directed cloning of defined large regions from bacterial genomes: identification of the Sinorhizobium meliloti pExo megaplasmid replicator region

Overcoming the Challenges of Megabase-Sized Plasmid Construction in Escherichia coli

Although Escherichia coli has been a popular tool for plasmid construction, this bacterium was believed to be "unsuitable" for constructing a large plasmid whose size exceeds 500 kilobases. We assumed that traditional plasmid vectors may lack some regulatory DNA elements required for the stable replication and segregation of such a large plasmid. In addition, the use of a few site-specific recombination systems may facilitate cloning of large DNA segments. Here we show two strategies for constructing 1-megabase (1-Mb) secondary chromosomes by using new bacterial artificial chromosome (BAC) vectors. First, the 3-Mb genome of a genome-reduced E. coli strain was split into two chromosomes (2-Mb and 1-Mb), of which the smaller one has the origin of replication and the partitioning locus of the Vibrio tubiashii secondary chromosome. This chromosome fission method (Flp-POP cloning) works via flippase-mediated excision, which coincides with the reassembly of a split chloramphenicol resistance gene, allowing chloramphenicol selection. Next, we developed a new cloning method (oriT-POP cloning) and a fully equipped BAC vector (pMegaBAC1H) for developing a 1-Mb plasmid. Two 0.5-Mb genomic regions were sequentially transferred from two donor strains to a recipient strain via conjugation and captured by pMegaBAC1H in the recipient strain to produce a 1-Mb plasmid. This 1-Mb plasmid was transmissible to another E. coli strain via conjugation. Furthermore, these 1-Mb secondary chromosomes were amplifiable in vitro by using the reconstituted E. coli chromosome replication cycle reaction (RCR). These strategies and technologies would make popular E. coli cells a productive factory for designer chromosome engineering.

Multidisciplinary approaches for studying rhizobium–legume symbioses

The rhizobium–legume symbiosis is a major source of fixed nitrogen (ammonia) in the biosphere. The potential for this process to increase agricultural yield while reducing the reliance on nitrogen-based fertilizers has generated interest in understanding and manipulating this process. For decades, rhizobium research has benefited from the use of leading techniques from a very broad set of fields, including population genetics, molecular genetics, genomics, and systems biology. In this review, we summarize many of the research strategies that have been employed in the study of rhizobia and the unique knowledge gained from these diverse tools, with a focus on genome- and systems-level approaches. We then describe ongoing synthetic biology approaches aimed at improving existing symbioses or engineering completely new symbiotic interactions. The review concludes with our perspective of the future directions and challenges of the field, with an emphasis on how the application of a multidisciplinary approach and the development of new methods will be necessary to ensure successful biotechnological manipulation of the symbiosis.

Techniques for Large-Scale Bacterial Genome Manipulation and Characterization of the Mutants with Respect to In Silico Metabolic Reconstructions

The rate at which all genes within a bacterial genome can be identified far exceeds the ability to characterize these genes. To assist in associating genes with cellular functions, a large-scale bacterial genome deletion approach can be employed to rapidly screen tens to thousands of genes for desired phenotypes. Here, we provide a detailed protocol for the generation of deletions of large segments of bacterial genomes that relies on the activity of a site-specific recombinase. In this procedure, two recombinase recognition target sequences are introduced into known positions of a bacterial genome through single cross-over plasmid integration. Subsequent expression of the site-specific recombinase mediates recombination between the two target sequences, resulting in the excision of the intervening region and its loss from the genome. We further illustrate how this deletion system can be readily adapted to function as a large-scale in vivo cloning procedure, in which the region excised from the genome is captured as a replicative plasmid. We next provide a procedure for the metabolic analysis of bacterial large-scale genome deletion mutants using the Biolog Phenotype MicroArray™ system. Finally, a pipeline is described, and a sample Matlab script is provided, for the integration of the obtained data with a draft metabolic reconstruction for the refinement of the reactions and gene-protein-reaction relationships in a metabolic reconstruction.

A Family of Single Copy repABC-Type Shuttle Vectors Stably Maintained in the Alpha-Proteobacterium Sinorhizobium meliloti

A considerable share of bacterial species maintains segmented genomes. Plant symbiotic α-proteobacterial rhizobia contain up to six repABC-type replicons in addition to the primary chromosome. These low or unit-copy replicons, classified as secondary chromosomes, chromids, or megaplasmids, are exclusively found in α-proteobacteria. Replication and faithful partitioning of these replicons to the daughter cells is mediated by the repABC region. The importance of α-rhizobial symbiotic nitrogen fixation for sustainable agriculture and Agrobacterium-mediated plant transformation as a tool in plant sciences has increasingly moved biological engineering of these organisms into focus. Plasmids are ideal DNA-carrying vectors for these engineering efforts. On the basis of repABC regions collected from α-rhizobial secondary replicons, and origins of replication derived from traditional cloning vectors, we devised the versatile family of pABC shuttle vectors propagating in Sinorhizobium meliloti, related members of the Rhizobiales, and Escherichia coli. A modular plasmid library providing the elemental parts for pABC vector assembly was founded. The standardized design of these vectors involves five basic modules: (1) repABC cassette, (2) plasmid-derived origin of replication, (3) RK2/RP4 mobilization site (optional), (4) antibiotic resistance gene, and (5) multiple cloning site flanked by transcription terminators. In S. meliloti, pABC vectors showed high propagation stability and unit-copy number. We demonstrated stable coexistence of three pABC vectors in addition to the two indigenous megaplasmids in S. meliloti, suggesting combinability of multiple compatible pABC plasmids. We further devised an in vivo cloning strategy involving Cre/lox-mediated translocation of large DNA fragments to an autonomously replicating repABC-based vector, followed by conjugation-mediated transfer either to compatible rhizobia or E. coli.

"Cre/loxP plus BAC": a strategy for direct cloning of large DNA fragment and its applications in Photorhabdus luminescens and Agrobacterium tumefaciens

Heterologous expression has been proven to be a valid strategy for elucidating the natural products produced by gene clusters uncovered by genome sequencing projects. Efforts have been made to efficiently clone gene clusters directly from genomic DNA and several approaches have been developed. Here, we present an alternative strategy based on the site-specific recombinase system Cre/loxP for direct cloning gene clusters. A type three secretion system (T3SS) gene cluster (~32 kb) from Photorhabdus luminescens TT01 and DNA fragment (~78 kb) containing the siderophore biosynthetic gene cluster from Agrobacterium tumefaciens C58 have been successfully cloned into pBeloBAC11 with “Cre/loxP plus BAC” strategy. Based on the fact that Cre/loxP system has successfully used for genomic engineering in a wide range of organisms, we believe that this strategy could be widely used for direct cloning of large DNA fragment.

Genome engineering and direct cloning of antibiotic gene clusters via phage ϕBT1 integrase-mediated site-specific recombination in Streptomyces

Several strategies have been used to clone large DNA fragments directly from bacterial genome. Most of these approaches are based on different site-specific recombination systems consisting of a specialized recombinase and its target sites. In this study, a novel strategy based on phage ϕBT1 integrase-mediated site-specific recombination was developed, and used for simultaneous Streptomyces genome engineering and cloning of antibiotic gene clusters. This method has been proved successful for the cloning of actinorhodin gene cluster from Streptomyces coelicolor M145, napsamycin gene cluster and daptomycin gene cluster from Streptomyces roseosporus NRRL 15998 at a frequency higher than 80%. Furthermore, the system could be used to increase the titer of antibiotics as we demonstrated with actinorhodin and daptomycin, and it will be broadly applicable in many Streptomyces.

Mining the metabiome: identifying novel natural products from microbial communities

Microbial-derived natural products provide the foundation for most of the chemotherapeutic arsenal available to contemporary medicine. In the face of a dwindling pipeline of new lead structures identified by traditional culturing techniques and an increasing need for new therapeutics, surveys of microbial biosynthetic diversity across environmental metabiomes have revealed enormous reservoirs of as yet untapped natural products chemistry. In this review, we touch on the historical context of microbial natural product discovery and discuss innovations and technological advances that are facilitating culture-dependent and culture-independent access to new chemistry from environmental microbiomes with the goal of reinvigorating the small molecule therapeutics discovery pipeline. We highlight the successful strategies that have emerged and some of the challenges that must be overcome to enable the development of high-throughput methods for natural product discovery from complex microbial communities.

An improved method for oriT-directed cloning and functionalization of large bacterial genomic regions

We have made significant improvements to a broad-host-range system for the cloning and manipulation of large bacterial genomic regions based on site-specific recombination between directly repeated oriT sites during conjugation. Using two suicide capture vectors carrying flanking homology regions, oriT sites are recombined on either side of the target region. Using a broad-host-range conjugation helper plasmid, the region between the oriT sites is conjugated into an Escherichia coli recipient strain, where it is circularized and maintained as a chimeric mini-F vector. The cloned target region is functionalized in multiple ways to accommodate downstream manipulation. The target region is flanked with Gateway attB sites for recombination into other vectors and by rare 18-bp I-SceI restriction sites for subcloning. The Tn7-functionalized target can also be inserted at a naturally occurring chromosomal attTn7 site(s) or maintained as a broad-host-range plasmid for complementation or heterologous expression studies. We have used the oriTn7 capture technique to clone and complement Burkholderia pseudomallei genomic regions up to 140 kb in size and have created isogenic Burkholderia strains with various combinations of genomic islands. We believe this system will greatly aid the cloning and genetic analysis of genomic islands, biosynthetic gene clusters, and large open reading frames.

The Sinorhizobium meliloti chromosomal origin of replication

The predicted chromosomal origin of replication (oriC) from the alfalfa symbiontSinorhizobium melilotiis shown to allow autonomous replication of a normally non-replicating plasmid withinS. meliloticells. This is the first chromosomal replication origin to be experimentally localized in theRhizobiaceaeand its location, adjacent tohemE, is the same as fororiCinCaulobacter crescentus, the only experimentally characterized alphaproteobacterialoriC. Using an electrophoretic mobility shift assay and purifiedS. melilotiDnaA replication initiation protein, binding sites for DnaA were mapped in theS. meliloti oriCregion. Mutations in these sites eliminated autonomous replication.S. melilotithat expressed DnaA from a plasmidlacpromoter was observed to form pleomorphic filamentous cells, suggesting that cell division was perturbed. Interestingly, this cell phenotype is reminiscent of differentiated bacteroids found inside plant cells in alfalfa root nodules.

Replication regions of Sinorhizobium meliloti plasmids

The replication (rep) regions of small plasmids from three Sinorhizobium meliloti strains were cloned by marker rescue. Two unique replication regions were identified, one of which was common to two different strains. Plasmid pBB83 carried a 7.2 kbp rep region from a 42 kbp plasmid, and pBB84 carried a 4.5 kbp rep region from a 36 kbp plasmid. The cloned rep regions were of different compatibility types, and were capable of displacing their parent plasmids from S. meliloti. Neither could function in a PolA- strain of Escherichia coli. The cloned replication regions were less stable in S. meliloti than their parent plasmids. The rep genes for each plasmid were localized to less than 2.5 kbp segments. Sequencing data revealed that the pBB83 Rep protein is uncommon, with partial identity to a protein encoded by a plasmid from S. meliloti GR4 [Mercado-Blanco, J., Olivares, J., 1994. The large nonsymbiotic plasmid pRmeGR4a of Rhizobium meliloti GR4 encodes a protein involved in replication that has homology with the RepC protein of Agrobacterium plasmids. Plasmid 32, 75-79]. However, the cloned DNA fragment also contains a truncated segment of the common repABC genes, suggesting that the parent plasmid contained two sets of replication genes. Other genes and an IS-element within the insert are most closely related to sequences derived from the Rhizobiaceae family, suggesting that the plasmid has a limited host range. In contrast, the pBB84 rep region contained genes similar to those associated with several broad host-range plasmids, and its Rep protein is related to that of a Pseudomonas aeruginosa broad host-range plasmid, pVS1 [Heeb, S., Itoh, Y., Nishijyo, T., Schnider, U., Keel, C., Wade, J., Walsh, U., O'Gara, F., Haas, D., 2000. Small, stable shuttle vectors based on the minimal pVS1 replicon for use in gram-negative, plant-associated bacteria. Mol. Plant-Microbe Interact. 13, 232-237]. The pBB84 rep region also includes a probable origin of replication, consisting of DNA boxes flanking a series of direct repeats and an AT-rich sequence.

The expression of a novel antisense gene mediates incompatibility within the large repABC family of alpha-proteobacterial plasmids

Large extrachromosomal replicons in many members of the alpha-proteobacteria encode genes that are required for plant or animal pathogenesis or symbiosis. Most of these replicons encode repABC genes that control their replication and faithful segregation during cell division. In addition to its chromosome, the plant endosymbiont Sinorhizobium meliloti also maintains the 1.4 Mb pSymA and 1.7 Mb pSymB symbiotic megaplasmids both of which are repABC-type replicons. In all repABC loci that have been characterized, an apparently untranslated intergenic region between the repB and repC genes encodes a strong incompatibility determinant (referred to as incalpha). Here we report the isolation of mutations within the incalpha regions of pSymA and pSymB that eliminate incompatibility. These mutations map to and inactivate a promoter in the intergenic region that drives the expression of an approximately 56 nucleotide untranslated RNA molecule that mediates incompatibility. This gene, that we have named incA, is transcribed antisense to the repABC genes. Our analysis suggests that the incA gene is conserved in repABC loci from a diverse spectrum of bacteria.

A phylogenetic analysis of the pSymB replicon from the Sinorhizobium meliloti genome reveals a complex evolutionary history

Microbial genomes are thought to be mosaic, making it difficult to decipher how these genomes have evolved. Whole-genome nearest-neighbor analysis was applied to the Sinorhizobium meliloti pSymB replicon to determine its origin, the degree of horizontal transfer, and the conservation of gene order. Prediction of the nearest neighbor based on contextual information, i.e., the nearest phylogenetic neighbor of adjacent genes, provided useful information for genes for which phylogenetic relationships could not be established. A large portion of pSymB genes are most closely related to genes in the Agrobacterium tumefaciens linear chromosome, including the rep and min genes. This suggests a common origin for these replicons. Genes with the nearest neighbor from the same species tend to be grouped in "patches". Gene order within these patches is conserved, but the content of the patches is not limited to operons. These data show that 13% of pSymB genes have nearest neighbors in species that are not members of the Rhizobiaceae family (including two archaea), and that these likely represent genes that have been involved in horizontal transfer.

Identification of the partitioning site within the repABC-type replicon of the composite Paracoccus versutus plasmid pTAV1

The replicator region of composite plasmid pTAV1 of Paracoccus versutus (included in mini-replicon pTAV320) belongs to the family of repABC replicons commonly found in plasmids harbored by Agrobacterium and Rhizobium spp. The repABC replicons encode three genes clustered in an operon, which are involved in partitioning (repA and repB) and replication (repC). In order to localize the partitioning site of pTAV320, the two identified incompatibility determinants of this mini-replicon (inc1, located in the intergenic sequence between repB and repC; and inc2, situated downstream of the repC gene) were PCR amplified and used together with purified RepB fusion protein (homologous to the type B partitioning proteins binding to the partitioning sites) in an electrophoretic mobility shift assay. The protein bound only inc2, forming two complexes in a protein concentration-dependent manner. The inc2 region contains two long (14-bp) repeated sequences (R1 and R2). Disruption of these sequences completely eliminates RepB binding ability. R1 and R2 have sequence similarities with analogous repeats of another repABC replicon of plasmid pPAN1 of Paracoccus pantotrophus DSM 82.5 and with centromeric sequences of the Bacillus subtilis chromosome. Excess RepB protein resulted in destabilization of the inc2-containing plasmid in Escherichia coli. On the other hand, the inc2 region could stabilize another unstable replicon in P. versutus when RepA and RepB were delivered in trans, proving that this region has centromere-like activity. Thus, it was demonstrated that repA, repB, and inc2 constitute a functional system for active partitioning of pTAV320.

RepA negatively autoregulates the transcription of the repABC operon of the Rhizobium etli symbiotic plasmid basic replicon

The basic replicon of Rhizobium etli CE3, like other members of the repABC plasmid family, is constituted by the repABC operon. RepC is essential for replication, and RepA and RepB play a role in plasmid segregation. It has been shown that deletion derivatives lacking the repAB genes have an increased copy number, indicating that these genes participate in the control of plasmid copy number. RepA is also a trans-incompatibility factor. To understand the regulation of the repABC operon, in this paper: (i) the transcription start site of the repABC operon was determined; (ii) the promoter region was identified by site-directed mutagenesis of the putative -35 and -10 hexameric elements; and (iii) RepA was recognized as a negative regulator of the transcription of the repABC operon.

The complete sequence of the 1,683-kb pSymB megaplasmid from the N2-fixing endosymbiont Sinorhizobium meliloti

Analysis of the 1,683,333-nt sequence of the pSymB megaplasmid from the symbiotic N(2)-fixing bacterium Sinorhizobium meliloti revealed that the replicon has a high gene density with a total of 1,570 protein-coding regions, with few insertion elements and regions duplicated elsewhere in the genome. The only copies of an essential arg-tRNA gene and the minCDE genes are located on pSymB. Almost 20% of the pSymB sequence carries genes encoding solute uptake systems, most of which were of the ATP-binding cassette family. Many previously unsuspected genes involved in polysaccharide biosynthesis were identified and these, together with the two known distinct exopolysaccharide synthesis gene clusters, show that 14% of the pSymB sequence is dedicated to polysaccharide synthesis. Other recognizable gene clusters include many involved in catabolic activities such as protocatechuate utilization and phosphonate degradation. The functions of these genes are consistent with the notion that pSymB plays a major role in the saprophytic competence of the bacteria in the soil environment.