Heterologous production of Clostridium cellulovorans engB, using protease-deficient Bacillus subtilis, and preparation of active recombinant cellulosomes

Protein Engineering of Vip3A in a Selected Bacillus thuringiensis Host for Consistent High Protein Production

This study aimed to obtain reliable high Vip3A production from Bacillus thuringiensis (Bt) by modifying Vip3A to acquire higher thermostability in a suitable host. Bt117 is a great host for Vip3A production due to protein production consistency, low protease activity in culture media, and large amounts of mostly full-length protein, but it produces Vip3A with lower thermostability (Vip3Aa35). The C-terminal region of Bt117 Vip3A was replaced with that of a Vip3A with higher thermostability (Vip3Aa64 from Bt294) to generate the recombinant Bt117-Vip3Aa64-C. Like the parental strain Bt117, this strain expressed mostly full-length protein and exhibited low protease activity and similar protein expression profiles in culture media but retained greater larvicidal activity upon 37 °C storage like Bt294 Vip3Aa64. Importantly, every culture batch of Bt117-Vip3Aa64-C yielded over 200 mg/l Vip3A, which is a notable improvement over the original Vip3Aa64-producing strain Bt294 where 45% of culture batches failed to produce Vip3A at the same level. Successfully, we combined the superior qualities of two Bt strains, Bt294, which produces thermostable Vip3A but at low and inconsistent levels, and Bt117, which produces Vip3A with low thermostability but at consistently high levels. Protein engineering of Vip3A in Bt117 ultimately yielded an improved strain producing a thermostable Vip3A with reliably high protein production.

Therapeutic proteins: developments, progress, challenges, and future perspectives

Proteins are considered magic molecules due to their enormous applications in the health sector. Over the past few decades, therapeutic proteins have emerged as a promising treatment option for various diseases, particularly cancer, cardiovascular disease, diabetes, and others. The formulation of protein-based therapies is a major area of research, however, a few factors still hinder the large-scale production of these therapeutic products, such as stability, heterogenicity, immunogenicity, high cost of production, etc. This review provides comprehensive information on various sources and production of therapeutic proteins. The review also summarizes the challenges currently faced by scientists while developing protein-based therapeutics, along with possible solutions. It can be concluded that these proteins can be used in combination with small molecular drugs to give synergistic benefits in the future.

Current state of molecular and metabolic strategies for the improvement of L-asparaginase expression in heterologous systems

Heterologous expression of L-asparaginase (L-ASNase) has become an important area of research due to its clinical and food industry applications. This review provides a comprehensive overview of the molecular and metabolic strategies that can be used to optimize the expression of L-ASNase in heterologous systems. This article describes various approaches that have been employed to increase enzyme production, including the use of molecular tools, strain engineering, and in silico optimization. The review article highlights the critical role that rational design plays in achieving successful heterologous expression and underscores the challenges of large-scale production of L-ASNase, such as inadequate protein folding and the metabolic burden on host cells. Improved gene expression is shown to be achievable through the optimization of codon usage, synthetic promoters, transcription and translation regulation, and host strain improvement, among others. Additionally, this review provides a deep understanding of the enzymatic properties of L-ASNase and how this knowledge has been employed to enhance its properties and production. Finally, future trends in L-ASNase production, including the integration of CRISPR and machine learning tools are discussed. This work serves as a valuable resource for researchers looking to design effective heterologous expression systems for L-ASNase production as well as for enzymes production in general.

Current challenges in designer cellulosome engineering

Designer cellulosomes (DCs) are engineered multi-enzyme complexes, comprising carbohydrate-active enzymes attached to a common backbone, the scaffoldin, via high-affinity cohesin-dockerin interactions. The use of DCs in the degradation of renewable biomass polymers is a promising approach for biorefineries. Indeed, DCs have shown significant hydrolytic activities due to the enhanced enzyme-substrate proximity and inter-enzyme synergies, but technical hurdles in DC engineering have hindered further progress towards industrial application. The challenge in DC engineering lies in the large diversity of possible building blocks and architectures, resulting in a multivariate and immense design space. Simultaneously, the precise DC composition affects many relevant parameters such as activity, stability, and manufacturability. Since protein engineers face a lack of high-throughput approaches to explore this vast design space, DC engineering may result in an unsatisfying outcome. This review provides a roadmap to guide researchers through the process of DC engineering. Each step, starting from concept to evaluation, is described and provided with its challenges, along with possible solutions, both for DCs that are assembled in vitro or are displayed on the yeast cell surface. KEY POINTS: • Construction of designer cellulosomes is a multi-step process. • Designer cellulosome research deals with multivariate construction challenges. • Boosting designer cellulosome efficiency requires exploring a vast design space.

[Approaches for improving L-asparaginase expression in heterologous systems]

L-asparaginase (EC 3.5.1.1) is one of the most demanded enzymes used in the pharmaceutical industry as a drug and in the food industry to prevent the formation of toxic acrylamide. Researchers aimed to improve specific activity and reduce side effects to create safer and more potent enzyme products. However, protein modifications and heterologous expression remain problematic in the production of asparaginases from different species. Heterologous expression in optimized producer strains is rationally organized; therefore, modified and heterologous protein expression is enhanced, which is the main strategy in the production of asparaginase. This strategy solves several problems: incorrect protein folding, metabolic load on the producer strain and codon misreading, which affects translation and final protein domains, leading to a decrease in catalytic activity. The main approaches developed to improve the heterologous expression of L-asparaginases are considered in this paper.

Expression and Molecular Modification of Chitin Deacetylase from Streptomyces bacillaris

Chitin deacetylase can be used in the green and efficient preparation of chitosan from chitin. Herein, a novel chitin deacetylase SbCDA from Streptomyces bacillaris was heterologously expressed and comprehensively characterized. SbDNA exhibits its highest deacetylation activity at 35 °C and pH 8.0. The enzyme activity is enhanced by Mn²⁺ and prominently inhibited by Zn²⁺, SDS, and EDTA. SbCDA showed better deacetylation activity on colloidal chitin, (GlcNAc)₅, and (GlcNAc)₆ than other forms of the substrate. Molecular modification of SbCDA was conducted based on sequence alignment and homology modeling. A mutant SbCDA63G with higher activity and better temperature stability was obtained. The deacetylation activity of SbCDA63G was increased by 133% compared with the original enzyme, and the optimal reaction temperature increased from 35 to 40 °C. The half-life of SbCDA63G at 40 °C is 15 h, which was 5 h longer than that of the original enzyme. The improved characteristics of the chitin deacetylase SbCDA63G make it a potential candidate to industrially produce chitosan from chitin.

A genetic toolkit for efficient production of secretory protein in Bacillus subtilis

Bacillus subtilis is a microbial cell factory widely used to produce recombinant proteins, but the expression of heterologous proteins is often severely hampered. This study constructed a genetic toolkit for improving the secretory efficiency of heterologous proteins in Bacillus subtilis. First, the protease-deficient hosts were reconstructed. Then, two endogenous constitutive promoters, P_hag and P_spovG, were screened. Next, a method called systemic combinatorial optimization of ribosome binding site (RBS) equipped with signal peptide (SCORES) was designed for optimizing the secretion and translation of the heterologous protein. Finally, Serratia marcescens nonspecific endonuclease (SMNE), which causes cell death by degrading nucleic acids, was expressed. The enzyme activity in the shake flask reached 7.5 × 10⁶ U/L, which was 7.5-times that of the control RBS and signal peptide combination (RS0). This study not only expanded on the synthetic biology toolbox in B. subtilis but also provided strategies to create a prokaryotic protein expression system.

Accelerated strain construction and characterization of C. glutamicum protein secretion by laboratory automation

Secretion of bacterial proteins into the culture medium simplifies downstream processing by avoiding cell disruption for target protein purification. However, a suitable signal peptide for efficient secretion needs to be identified, and currently, there are no tools available to predict optimal combinations of signal peptides and target proteins. The selection of such a combination is influenced by several factors, including protein biosynthesis efficiency and cultivation conditions, which both can have a significant impact on secretion performance. As a result, a large number of combinations must be tested. Therefore, we have developed automated workflows allowing for targeted strain construction and secretion screening using two platforms. Key advantages of this experimental setup include lowered hands-on time and increased throughput. In this study, the automated workflows were established for the heterologous production of Fusarium solani f. sp. pisi cutinase in Corynebacterium glutamicum. The target protein was monitored in culture supernatants via enzymatic activity and split GFP assay. Varying spacer lengths between the Shine-Dalgarno sequence and the start codon of Bacillus subtilis signal peptides were tested. Consistent with previous work on the secretory cutinase production in B. subtilis, a ribosome binding site with extended spacer length to up to 12 nt, which likely slows down translation initiation, does not necessarily lead to poorer cutinase secretion by C. glutamicum. The best performing signal peptides for cutinase secretion with a standard spacer length were identified in a signal peptide screening. Additional insights into the secretion process were gained by monitoring secretion stress using the C. glutamicum K9 biosensor strain. KEY POINTS: • Automated workflows for strain construction and screening of protein secretion • Comparison of spacer, signal peptide, and host combinations for cutinase secretion • Signal peptide screening for secretion by C. glutamicum using the split GFP assay.

Multiple Modular Engineering of Bacillus Amyloliquefaciens Cell Factories for Enhanced Production of Alkaline Proteases From B. Clausii

Bacillus amyloliquefaciens is a generally recognized as safe (GRAS) microorganism that presents great potential for the production of heterologous proteins. In this study, we performed genomic and comparative transcriptome to investigate the critical modular in B. amyloliquefaciens on the production of heterologous alkaline proteases (AprE). After investigation, it was concluded that the key modules affecting the production of alkaline protease were the sporulation germination module (Module I), extracellular protease synthesis module (Module II), and extracellular polysaccharide synthesis module (Module III) in B. amyloliquefaciens. In Module I, AprE yield for mutant BA ΔsigF was 25.3% greater than that of BA Δupp. Combining Module I synergistically with mutation of extracellular proteases in Module II significantly increased AprE production by 36.1% compared with production by BA Δupp. In Module III, the mutation of genes controlling extracellular polysaccharides reduced the viscosity and the accumulation of sediment, and increased the rate of dissolved oxygen in fermentation. Moreover, AprE production was 39.6% higher than in BA Δupp when Modules I, II and III were engineered in combination. This study provides modular engineering strategies for the modification of B. amyloliquefaciens for the production of alkaline proteases.

Protein Mediated Enzyme Immobilization

Enzyme immobilization is an essential technology for commercializing biocatalysis. It imparts stability, recoverability, and other valuable features that improve the effectiveness of biocatalysts. While many avenues to join an enzyme to solid phases exist, protein-mediated immobilization is rapidly developing and has many advantages. Protein-mediated immobilization allows for the binding interaction to be genetically coded, can be used to create artificial multienzyme cascades, and enables modular designs that expand the variety of enzymes immobilized. By designing around binding interactions between protein domains, they can be integrated into functional materials for protein immobilization. These materials are framed within the context of biocatalytic performance, immobilization efficiency, and stability of the materials. In this review, supports composed entirely of protein are discussed first, with systems such as cellulosomes and protein cages being discussed alongside newer technologies like spore-based biocatalysts and forizymes. Protein-composite materials such as polymersomes and protein-inorganic supraparticles are then discussed to demonstrate how protein-mediated strategies are applied to many classes of solid materials. Critical analysis and future directions of protein-based immobilization are then discussed, with a particular focus on both computational and design strategies to advance this area of research and make it more broadly applicable to many classes of enzymes.

Production of Lysinibacillus sphaericus Mosquitocidal Protein Mtx2 from Bacillus subtilis as a Secretory Protein

BACKGROUND

Mtx2 is a mosquitocidal toxin produced during the vegetative growth of Lysinibacillus sphaericus. The protein shows synergism with other toxins against mosquito larvae; hence it could be used in mosquito control formulations. The protein expression system is needed for Mtx2 development as a biocontrol agent.

OBJECTIVE

The objective of the study was to set up a Bacillus subtilis system to produce Mtx2 as a secreted protein since the protein contains a putative signal peptide.

METHODS

Initially, four different promoters (P43, Pspac, PxylA, and PyxiE) were compared for their strength using GFP as a reporter in B. subtilis. Subsequently, six different signal peptides (SacB, Epr, AmyE, AprE, LipA, and Vip3A)were tested in conjunction with the selected promoter and mtx2 to evaluate levels of Mtx2 secreted by B. subtilis WB800, an extracellular protease-deficient strain.

RESULTS

The promoter PyxiE showed the highest GFP intensity and was selected for further study. Mtx2 was successfully produced as a secreted protein from signal peptides LipA and AmyE, and exhibited larvicidal activity against Aedesaegypti.

CONCLUSION

B. subtilis was successfully developed as a host for the production of secreted Mtx2 and the protein retained its larvicidal activity. Although the Mtx2 production level still needs improvement, the constructed plasmids could be used to produce other soluble proteins.

β-Galactosidase: From its source and applications to its recombinant form

Carbohydrate-active enzymes are a group of important enzymes playing a critical role in the degradation and synthesis of carbohydrates. Glycosidases can hydrolyze glycosides into oligosaccharides, polysaccharides, and glycoconjugates via a cost-effective approach. Lactase is an important member of β-glycosidases found in higher plants, animals, and microorganisms. β-Galactosidases can be used to degrade the milk lactose for making lactose-free milk, which is sweeter than regular milk and is suitable for lactose-intolerant people. β-Galactosidase is employed by many food industries to degrade lactose and improve the digestibility, sweetness, solubility, and flavor of dairy products. β-Galactosidase enzymes have various families and are applied in the food-processing industries such as hydrolyzed-milk products, whey, and galactooligosaccharides. Thus, this enzyme is a valuable protein which is now produced by recombinant technology. In this review, origins, structure, recombinant production, and critical modifications of β-galactosidase for improving the production process are discussed. Since β-galactosidase is a valuable enzyme in industry and health care, a study of its various aspects is important in industrial biotechnology and applied biochemistry.

High-level stable expression of gene for preparation of chlorothalonil hydrolytic dehalogenase and its application in elimination of chlorothalonil inhibition on bioconversion of lignocellulosic biomass

To achieve the high-level stable expression of chlorothalonil hydrolytic dehalogenase (Chd), the gene chd was first integrated into the chromosome of Bacillus subtilis WB800. High generation stability was achieved by almost no gene lost after six generations but Chd activity decreased. aprE promoter alteration, translation initiation region modification and multi-copy chromosome integration were studied and these modifications could increase Chd activity by 270%, 2304% and 25%. Chlorothalonil residual exhibited inhibition on bioconversion of lignocellulosic biomass. The addition of Chd crude enzyme (60 μL per g wheat straw) could increase glucose production by 36.10% and 39.65% in synergistic hydrolysis and separate hydrolysis by laccase and cellulase with 120 mg/L residual chlorothalonil. Filter paper activity and carboxymethyl cellulase activity were enhanced by 12.84% and 23.95%, and biomass of Trichoderma reesei was increased by 76.67% under 50 μg chlorothalonil/g dry straw in solid-state fermentation. Thus, the high-level stable expressed Chd effectively eliminated chlorothalonil inhibition on enzymatic hydrolysis and solid-state fermentation. It showed promising potential for bioremediation of chlorothalonil pollution and improving conversion efficiency of lignocellulose.

Recent Advances in Recombinant Protein Production byBacillus subtilis

Bacillus subtilis has become a widely used microbial cell factory for the production of recombinant proteins, especially those associated with foods and food processing. Recent advances in genetic manipulation and proteomic analysis have been used to greatly improve protein production in B. subtilis. This review begins with a discussion of genome-editing technologies and application of the CRISPR–Cas9 system to B. subtilis. A summary of the characteristics of crucial legacy strains is followed by suggestions regarding the choice of origin strain for genetic manipulation. Finally, the review analyzes the genes and operons of B. subtilis that are important for the production of secretory proteins and provides suggestions and examples of how they can be altered to improve protein production. This review is intended to promote the engineering of this valuable microbial cell factory for better recombinant protein production.

Engineering Biology to Construct Microbial Chassis for the Production of Difficult-to-Express Proteins

A large proportion of the recombinant proteins manufactured today rely on microbe-based expression systems owing to their relatively simple and cost-effective production schemes. However, several issues in microbial protein expression, including formation of insoluble aggregates, low protein yield, and cell death are still highly recursive and tricky to optimize. These obstacles are usually rooted in the metabolic capacity of the expression host, limitation of cellular translational machineries, or genetic instability. To this end, several microbial strains having precisely designed genomes have been suggested as a way around the recurrent problems in recombinant protein expression. Already, a growing number of prokaryotic chassis strains have been genome-streamlined to attain superior cellular fitness, recombinant protein yield, and stability of the exogenous expression pathways. In this review, we outline challenges associated with heterologous protein expression, some examples of microbial chassis engineered for the production of recombinant proteins, and emerging tools to optimize the expression of heterologous proteins. In particular, we discuss the synthetic biology approaches to design and build and test genome-reduced microbial chassis that carry desirable characteristics for heterologous protein expression.

Construction of second generation protease-deficient hosts of Bacillus subtilis for secretion of foreign proteins

Although one of the major factors limiting the application of Bacillus subtilis as an expression host has been its production of at least eight extracellular proteases, researchers have also noticed that some proteases benefited the secretion of foreign proteins at times. Therefore, to maximize the yield of a foreign protein, the proteases should be selectively inactivated. This raises a new question that how to identify the favorable and unfavorable proteases for a target protein. Here, an evaluation system containing nine mutant strains of B. subtilis 168 was developed to address this question. The mutant strain PD8 has all the eight proteases inactivated whereas each of the other eight mutant strains expresses only one kind of these eight proteases. The target protein is secreted in these nine mutant strains; if the production of target protein in a mutant strain is higher than that in strain PD8, the corresponding protease is regarded as favorable. Accordingly, the optimal protease-deficient host is constructed through inactivating the unfavorable proteases. The effectiveness of this system was confirmed by expressing three foreign proteins. This study provides a strategy for improving the secretion of a foreign protein in B. subtilis through tailoring a personalized protease-deficient host.

The Goldilocks Approach: A Review of Employing Design of Experiments in Prokaryotic Recombinant Protein Production

The production of high yields of soluble recombinant protein is one of the main objectives of protein biotechnology. Several factors, such as expression system, vector, host, media composition and induction conditions can influence recombinant protein yield. Identifying the most important factors for optimum protein expression may involve significant investment of time and considerable cost. To address this problem, statistical models such as Design of Experiments (DoE) have been used to optimise recombinant protein production. This review examines the application of DoE in the production of recombinant proteins in prokaryotic expression systems with specific emphasis on media composition and culture conditions. The review examines the most commonly used DoE screening and optimisation designs. It provides examples of DoE applied to optimisation of media and culture conditions.

Advanced Cloning Tools for Construction of Designer Cellulosomes

Cellulose deconstruction is achieved in nature through two main enzymatic paradigms, i.e., free enzymes and enzymatic complexes (called cellulosomes). Gaining insights into the mechanism of action and synergy among the different cellulases is of high interest, notably in the field of renewable energy, and specifically, for the conversion of cellulosic biomass to soluble sugars, en route to biofuels. In this context, designer cellulosomes are artificially assembled, chimaeric protein complexes that are used as a tool to comparatively study cellulose degradation by different enzymatic paradigms, and could also serve to improve cellulose deconstruction. Various molecular biology techniques are employed in order to design and engineer the various components of designer cellulosomes. In this chapter, we describe the cloning processes through which the appropriate modules are selected and assembled at the molecular level.

Nanoscale Engineering of Designer Cellulosomes

Biocatalysts showcase the upper limit obtainable for high-speed molecular processing and transformation. Efforts to engineer functionality in synthetic nanostructured materials are guided by the increasing knowledge of evolving architectures, which enable controlled molecular motion and precise molecular recognition. The cellulosome is a biological nanomachine, which, as a fundamental component of the plant-digestion machinery from bacterial cells, has a key potential role in the successful development of environmentally-friendly processes to produce biofuels and fine chemicals from the breakdown of biomass waste. Here, the progress toward so-called "designer cellulosomes", which provide an elegant alternative to enzyme cocktails for lignocellulose breakdown, is reviewed. Particular attention is paid to rational design via computational modeling coupled with nanoscale characterization and engineering tools. Remaining challenges and potential routes to industrial application are put forward.

Cell surface engineering of industrial microorganisms for biorefining applications

In order to decrease carbon emissions and negative environmental impacts of various pollutants, biofuel/biochemical production should be promoted for replacing fossil-based industrial processes. Utilization of abundant lignocellulosic biomass as a feedstock has recently become an attractive option. In this review, we focus on recent efforts of cell surface display using industrial microorganisms such as Escherichia coli and yeast. Cell surface display is used primarily for endowing cellulolytic activity on the host cells, and enables direct fermentation to generate useful fuels and chemicals from lignocellulosic biomass. Cell surface display systems are systematically summarized, and the drawbacks/perspectives as well as successful application of surface display for industrial biotechnology are discussed.

Development of a homologous expression system for and systematic site-directed mutagenesis analysis of thurincin H, a bacteriocin produced by Bacillus thuringiensis SF361

Thurincin H is an antimicrobial peptide produced by Bacillus thuringiensis SF361. With a helical back bone, the 31 amino acids of thurincin H form a hairpin structure maintained by four pairs of very unique sulfur-to-α-carbon thioether bonds. The production of thurincin H depends on a putative gene cluster containing 10 open reading frames. The gene cluster includes three tandem structural genes (thnA1, thnA2, and thnA3) encoding three identical 40-amino-acid thurincin H prepeptides and seven other genes putatively responsible for prepeptide processing, regulation, modification, exportation, and self-immunity. A homologous thurincin H expression system was developed by transforming a thurincin H-deficient host with a novel expression vector, pGW133. The host, designated B. thuringiensis SF361 ΔthnA1 ΔthnA2 ΔthnA3, was constructed by deletion of the three tandem structural genes from the chromosome of the natural thurincin H producer. The thurincin H expression vector pGW133 was constructed by cloning the thurincin H native promoter, thnA1, and a Cry protein terminator into the Escherichia coli-B. thuringiensis shuttle vector pHT315. Thirty-three different pGW133 variants, each containing a different point mutation in the thnA1 gene, were generated and separately transformed into B. thuringiensis SF361 ΔthnA1 ΔthnA2 ΔthnA3. Those site-directed mutants contained either a single radical or conservative amino acid substitution on the thioether linkage-forming positions or a radical substitution on all other nonalanine amino acids. The bacteriocin activities of B. thuringiensis SF361 ΔthnA1 ΔthnA2 ΔthnA3 carrying different pGW133 variants against three different indicator strains were subsequently compared.

Cell-surface display of enzymes by the yeast Saccharomyces cerevisiae for synthetic biology

In yeast cell-surface displays, functional proteins, such as cellulases, are genetically fused to an anchor protein and expressed on the cell surface. Saccharomyces cerevisiae, which is often utilized as a cell factory for the production of fuels, chemicals, and proteins, is the most commonly used yeast for cell-surface display. To construct yeast cells with a desired function, such as the ability to utilize cellulose as a substrate for bioethanol production, cell-surface display techniques for the efficient expression of enzymes on the cell membrane need to be combined with metabolic engineering approaches for manipulating target pathways within cells. In this Minireview, we summarize the recent progress of biorefinery fields in the development and application of yeast cell-surface displays from a synthetic biology perspective and discuss approaches for further enhancing cell-surface display efficiency.

Genetic resources for advanced biofuel production described with the Gene Ontology

Dramatic increases in research in the area of microbial biofuel production coupled with high-throughput data generation on bioenergy-related microbes has led to a deluge of information in the scientific literature and in databases. Consolidating this information and making it easily accessible requires a unified vocabulary. The Gene Ontology (GO) fulfills that requirement, as it is a well-developed structured vocabulary that describes the activities and locations of gene products in a consistent manner across all kingdoms of life. The Microbial ENergy processes Gene Ontology () project is extending the GO to include new terms to describe microbial processes of interest to bioenergy production. Our effort has added over 600 bioenergy related terms to the Gene Ontology. These terms will aid in the comprehensive annotation of gene products from diverse energy-related microbial genomes. An area of microbial energy research that has received a lot of attention is microbial production of advanced biofuels. These include alcohols such as butanol, isopropanol, isobutanol, and fuels derived from fatty acids, isoprenoids, and polyhydroxyalkanoates. These fuels are superior to first generation biofuels (ethanol and biodiesel esterified from vegetable oil or animal fat), can be generated from non-food feedstock sources, can be used as supplements or substitutes for gasoline, diesel and jet fuels, and can be stored and distributed using existing infrastructure. Here we review the roles of genes associated with synthesis of advanced biofuels, and at the same time introduce the use of the GO to describe the functions of these genes in a standardized way.

Engineered platform for bioethylene production by a cyanobacterium expressing a chimeric complex of plant enzymes

Ethylene is an industrially important compound, but more sustainable production methods are desirable. Since cellulosomes increase the ability of cellulolytic enzymes by physically linking the relevant enzymes via dockerin-cohesin interactions, in this study, we genetically engineered a chimeric cellulosome-like complex of two ethylene-generating enzymes from tomato using cohesin-dockerins from the bacteria Clostridium thermocellum and Acetivibrio cellulolyticus. This complex was transformed into Escherichia coli to analyze kinetic parameters and enzyme complex formation and into the cyanobacterium Synechococcus elongatus PCC 7942, which was then grown with and without 0.1 mM isopropyl β-D-1-thiogalactopyranoside (IPTG) induction. Only at minimal protein expression levels (without IPTG), the chimeric complex produced 3.7 times more ethylene in vivo than did uncomplexed enzymes. Thus, cyanobacteria can be used to sustainably generate ethylene, and the synthetic enzyme complex greatly enhanced production efficiency. Artificial synthetic enzyme complexes hold great promise for improving the production efficiency of other industrial compounds.

Inactivation of aprE Gene in Bacillus subtilis 168 by Homologus Recombination

BACKGROUND

One of the most important producers of high quality industrial enzymes is the Gram-positive bacterium, Bacillus subtilis (B. Subtilis). One major limitation that hinders the wide application of B. subtilis is the secretion of high levels of extracellular proteases which degrade the secreted foreign proteins. In this study, homologus recombination technique was used to knock out its protease gene, aprE.

METHODS

The internal segment of the pro-sequence of aprE gene of B. subtilis 168 with a length of 80 bps and its complementary sequence were synthesized and ligated into pUB110 at EcoR1 and XbaI restriction sites. Competent cells of B. subtilis 168 were prepared and transformed by electroporation using Bio Rad gene pulser as explained in the methods section. Transformants carrying the recombinant plasmid were selected for resistance to neomycin. The success of homologous recombination was checked by PCR amplification of the neomycin gene which was part of the vector and did not exist in the genome of B. subtilis 168. The protease activity was measured using the Protease Fluorescent Detection Kit based on the proteolytic hydrolysis of fluorescein isothiocyanate (FITC)-labeled casein-substrate.

RESULTS

The results demonstrated that aprE gene would not be able to produce further active subtilisin E. The reduction of protease activity also confirmed the efficacy of the induced mutation in this gene.

CONCLUSION

It will therefore be a major challenge for future research to identify and modulate quality control systems of B. subtilis which limit the production of high quality protease- sensitive products such as lipase.

Exploring Amino Acids Responsible for the Temperature Profile of Glycoside Hydrolase Family 45 Endoglucanase EGL3 fromHumicola grisea

EGL3 and RCE1 are glycoside hydrolase family 45 endoglucanases isolated from Humicola grisea and Rhizopus oryzae respectively. The amino acid sequences of the two endoglucanases are homologous; on the other hand, the optimum temperature of EGL3 is higher than that of RCE1. In this study, four chimeric endoglucanases, named ER1, ER2, ER3 and ER4, in which one of four sequential amino acid regions of the EGL3 catalytic domain (CAD) was replaced by the corresponding RCE1 amino acids, were constructed to explore the region responsible for the EGL3 temperature profile. Then their temperature profiles were compared with that of the recombinant EGL3. Replacement of the N-terminal region of EGL3 with that of RCE1 caused the EGL3 temperature profile to shift to a lower temperature. These results suggest that the N-terminal amino acids of the EGL3 are responsible for the EGL3 temperature profile.

Degradation of extracytoplasmic catalysts for protein folding in Bacillus subtilis

The general protein secretion pathway of Bacillus subtilis has a high capacity for protein export from the cytoplasm, which is exploited in the biotechnological production of a wide range of enzymes. These exported proteins pass the membrane in an unfolded state, and accordingly, they have to fold into their active and protease-resistant conformations once membrane passage is completed. The lipoprotein PrsA and the membrane proteins HtrA and HtrB facilitate the extracytoplasmic folding and quality control of exported proteins. Among the native exported proteins of B. subtilis are at least 10 proteases that have previously been implicated in the degradation of heterologous secreted proteins. Recently, we have shown that these proteases also degrade many native membrane proteins, lipoproteins, and secreted proteins. The present studies were therefore aimed at assessing to what extent these proteases also degrade extracytoplasmic catalysts for protein folding. To this end, we employed a collection of markerless protease mutant strains that lack up to 10 different extracytoplasmic proteases. The results show that PrsA, HtrA, and HtrB are indeed substrates of multiple extracytoplasmic proteases. Thus, improved protein secretion by multiple-protease-mutant strains may be related to both reduced proteolysis and improved posttranslocational protein folding and quality control.

Deconstruction of lignocellulose into soluble sugars by native and designer cellulosomes

Lignocellulosic biomass, the most abundant polymer on Earth, is typically composed of three major constituents: cellulose, hemicellulose, and lignin. The crystallinity of cellulose, hydrophobicity of lignin, and encapsulation of cellulose by the lignin-hemicellulose matrix are three major factors that contribute to the observed recalcitrance of lignocellulose. By means of designer cellulosome technology, we can overcome the recalcitrant properties of lignocellulosic substrates and thus increase the level of native enzymatic degradation. In this context, we have integrated six dockerin-bearing cellulases and xylanases from the highly cellulolytic bacterium, Thermobifida fusca, into a chimeric scaffoldin engineered to bear a cellulose-binding module and the appropriate matching cohesin modules. The resultant hexavalent designer cellulosome represents the most elaborate artificial enzyme composite yet constructed, and the fully functional complex achieved enhanced levels (up to 1.6-fold) of degradation of untreated wheat straw compared to those of the wild-type free enzymes. The action of these designer cellulosomes on wheat straw was 33 to 42% as efficient as the natural cellulosomes of Clostridium thermocellum. In contrast, the reduction of substrate complexity by chemical or biological pretreatment of the substrate removed the advantage of the designer cellulosomes, as the free enzymes displayed higher levels of activity, indicating that enzyme proximity between these selected enzymes was less significant on pretreated substrates. Pretreatment of the substrate caused an increase in activity for all the systems, and the native cellulosome completely converted the substrate into soluble saccharides. IMPORTANCE Cellulosic biomass is a potential alternative resource which could satisfy future demands of transportation fuel. However, overcoming the natural lignocellulose recalcitrance remains challenging. Current research and development efforts have concentrated on the efficient cellulose-degrading strategies of cellulosome-producing anaerobic bacteria. Cellulosomes are multienzyme complexes capable of converting the plant cell wall polysaccharides into soluble sugar products en route to biofuels as an alternative to fossil fuels. Using a designer cellulosome approach, we have constructed the largest form of homogeneous artificial cellulosomes reported to date, which bear a total of six different cellulases and xylanases from the highly cellulolytic bacterium Thermobifida fusca. These designer cellulosomes were comparable in size to natural cellulosomes and displayed enhanced synergistic activities compared to their free wild-type enzyme counterparts. Future efforts should be invested to improve these processes to approach or surpass the efficiency of natural cellulosomes for cost-effective production of biofuels.

Production of XynX, a large multimodular protein of thermoanaerobacterium sp., by protease-deficient Bacillus subtilis strains [corrected]

XynX of Thermoanaerobacterium sp. [corrected] is a large, multimodular xylanase of 116 kDa. An Escherichia coli transformant carrying the entire xynX produced three active truncated xylanase species of 105, 85, and 64 kDa intracellularly. The Bacillus subtilis WB700 transformant with the xynX, a strain deficient in seven proteases including Vpr, secreted two active truncated xylanase species of 65 and 44 kDa. The B. subtilis WB800 transformant with xynX, a strain deficient in eight proteases including Vpr and WprA, secreted more active enzymes, 8.46 U ml(-1), mostly in the form of 105 and 85 kDa, than the WB700 transformant, 6.93 U ml(-1). This indicates that the additional deletion of wprA enabled the WB800 to secrete XynX in its intact form. B. subtilis WB800 produced more total enzyme activity than E. coli (1,692 ± 274 U vs. 141.9 ± 27.1 U), and, more importantly, secreted almost all the enzyme activity. The results suggest the potential use of B. subtilis WB800 as a host system for the production of large multimodular proteins.

A Bacillus anthracis strain deleted for six proteases serves as an effective host for production of recombinant proteins

Bacillus anthracis produces a number of extracellular proteases that impact the integrity and yield of other proteins in the B. anthracis secretome. In this study we show that anthrolysin O (ALO) and the three anthrax toxin proteins, protective antigen (PA), lethal factor (LF), and edema factor (EF), produced from the B. anthracis Ames 35 strain (pXO1⁺, pXO2⁻), are completely degraded at the onset of stationary phase due to the action of proteases. An improved Cre-loxP gene knockout system was used to sequentially delete the genes encoding six proteases (InhA1, InhA2, camelysin, TasA, NprB, and MmpZ). The role of each protease in degradation of the B. anthracis toxin components and ALO was demonstrated. Levels of the anthrax toxin components and ALO in the supernatant of the sporulation defective, pXO1⁺ A35HMS mutant strain deleted for the six proteases were significantly increased and remained stable over 24 h. A pXO1-free variant of this six-protease mutant strain, designated BH460, provides an improved host strain for the preparation of recombinant proteins. As an example, BH460 was used to produce recombinant EF, which previously has been difficult to obtain from B. anthracis. The EF protein produced from BH460 had the highest in vivo potency of any EF previously purified from B. anthracis or Escherichia coli hosts. BH460 is recommended as an effective host strain for recombinant protein production, typically yielding greater than 10mg pure protein per liter of culture.

Production and purification of staphylococcal nuclease in Lactococcus lactis using a new expression-secretion system and a pH-regulated mini-reactor

BACKGROUND

Staphylococcal (or micrococcal) nuclease or thermonuclease (SNase or Nuc) is a naturally-secreted nucleic acid degrading enzyme that participates in Staphylococcus aureus spread in the infected host. Purified Nuc protein can be used as an exogenous reagent to clear cellular extracts and improve protein purification. Here, a recombinant form of Nuc was produced and secreted in a Gram-positive host, Lactococcus lactis, and purified from the culture medium.

RESULTS

The gene segment corresponding to the S. aureus nuclease without its signal peptide was cloned in an expression-secretion vector. It was then fused to a lactococcal sequence encoding a signal peptide, and expressed under the control of a lactococcal promoter that is inducible by zinc starvation. An L. lactis subsp cremoris model strain (MG1363) transformed with the resulting plasmid was grown in either of two media (GM17v and CDM) that are free of animal compounds, allowing GMP (Good Manufacturing Practice) production. Induction conditions (concentration of the metal chelator EDTA and timing of addition) in small-scale pH-regulated fermentors were optimized using LacMF (Lactis Multi-Fermentor), a home-made parallel fermentation control system able to monitor 12 reactors simultaneously. Large amounts of recombinant Nuc (rNuc) were produced and secreted in both media, and rNuc was purified from GM17v medium in a single-step procedure.

CONCLUSIONS

In L. lactis, rNuc production and secretion were optimal after induction by 0.5 mM EDTA in small scale (200 mL) GM17v exponential phase cultures (at an OD(600) of 2), leading to a maximal protein yield of 210 mg per L of culture medium. Purified rNuc was highly active, displaying a specific activity of 2000 U/mg.

Two proteolytic modules are involved in regulated intramembrane proteolysis of Bacillus subtilis RsiW

Stress-induced degradation of the Bacillus subtilis anti-sigma factor RsiW results in the induction of genes controlled by the extracytoplasmic function sigma factor sigma(W). RsiW is cleaved by the mechanism of regulated intramembrane proteolysis at site-1 and -2 by PrsW and RasP respectively, and is then further degraded by cytoplasmic Clp peptidases. In a reconstituted Escherichia coli system, PrsW removes 40 amino acids from RsiW by cleaving between Ala168 and Ser169 of the extracytoplasmic domain, thereby generating RsiW-S1. Further trimming of RsiW-S1's C-terminus by the periplasmic tail-specific protease Tsp is crucial for subsequent RasP-catalysed clipping. In B. subtilis, mutation of RsiW at Ala168 severely impairs site-1 processing. RsiW-S1 is undetectable in wild-type B. subtilis and knockout strains lacking various extracytoplasmic proteases. While it can be stabilized by C-terminal tagging, even this fusion protein is still attacked. Thus, several peptidases seem to be involved in trimming of RsiW downstream of PrsW and upstream of RasP in B. subtilis. Overall, the RsiW degradation pathway can be subdivided into two modules each consisting of a site-specific peptidase that prepares RsiW for further degradation by downstream proteases.

Fast identification of thermostable beta-glucosidase mutants on cellobiose by a novel combinatorial selection/screening approach

Engineering costly cellulases on natural cellulosic substrates is of importance for emerging biomass-based biorefineries. Directed enzyme evolution is becoming a popular tool, but identification of desired mutants from a large mutant library remains challenging sometimes. In this work, we demonstrated a novel combinatorial selection/screening strategy for finding thermostable beta-glucosidase on its natural substrate-cellobiose. First, selection was conducted through complementation of beta-glucosidase for non-cellobiose-utilizing Escherichia coli so that only the cells expressing active beta-glucosidase can grow on a M9 synthetic medium with cellobiose as the sole carbon source (selection plate). Second, the clones on the selection plates were duplicated by using nylon membranes. After heat treatment, the nylon membranes were overlaid on M9/cellobiose screening plates so that remaining activities of thermostable beta-glucosidase mutants hydrolyzed cellobiose on the screening plates to glucose. Third, the growth of an indicator E. coli strain that can utilize glucose but not cellobiose on the screening plates helped detect the thermostable beta-glucosidase mutants on the selection plates. Several thermostable mutants were identified from a random mutant library of the Paenibacillus polymyxa beta-glucosidase. The most thermostable mutant A17S had an 11-fold increase in the half-life of thermoinactivation at 50 degrees C.

Molecular engineering of the cellulosome complex for affinity and bioenergy applications

The cellulosome complex has evolved to degrade plant cell walls and, as such, combines tenacious binding to cellulose with diverse catalytic activities against amorphous and crystalline cellulose. Cellulolytic microorganisms provide an extensive selection of domains; those with affinity for cellulose, cohesins and their dockerin binding partners that define cellulosome stoichiometry and architecture, and a range of catalytic activities against carbohydrates. These robust domains provide the building blocks for molecular design. This review examines how protein modules derived from the cellulosome have been incorporated into chimaeric proteins to provide biosynthetic tools for research and industry. These applications include affinity tags for protein purification, and non-chemical methods for immobilisation and presentation of recombinant protein domains on cellulosic substrates. Cellulosomal architecture provides a paradigm for design of enzymatic complexes that synergistically combine multiple catalytic subunits to achieve higher specific activity than would be obtained using free enzymes. Multimeric enzymatic complexes may have industrial applications of relevance for an emerging carbon economy. Biocatalysis will lead to more efficient utilisation of renewable carbon-fixing energy sources with the added benefits of reducing chemical waste streams and reliance on petroleum.

Production of recombinant proteins by microbes and higher organisms

Large proteins are usually expressed in a eukaryotic system while smaller ones are expressed in prokaryotic systems. For proteins that require glycosylation, mammalian cells, fungi or the baculovirus system is chosen. The least expensive, easiest and quickest expression of proteins can be carried out in Escherichia coli. However, this bacterium cannot express very large proteins. Also, for S-S rich proteins, and proteins that require post-translational modifications, E. coli is not the system of choice. The two most utilized yeasts are Saccharomyces cerevisiae and Pichia pastoris. Yeasts can produce high yields of proteins at low cost, proteins larger than 50 kD can be produced, signal sequences can be removed, and glycosylation can be carried out. The baculoviral system can carry out more complex post-translational modifications of proteins. The most popular system for producing recombinant mammalian glycosylated proteins is that of mammalian cells. Genetically modified animals secrete recombinant proteins in their milk, blood or urine. Similarly, transgenic plants such as Arabidopsis thaliana and others can generate many recombinant proteins.