Escherichia coli insertion sequence IS150: transposition via circular and linear intermediates

Metabolic stress constrains microbial L-cysteine production in Escherichia coli by accelerating transposition through mobile genetic elements

BACKGROUND

L-cysteine is an essential chemical building block in the pharmaceutical-, cosmetic-, food and agricultural sector. Conventionally, L-cysteine production relies on the conversion of keratinous biomass mediated by hydrochloric acid. Today, fermentative production based on recombinant E. coli, where L-cysteine production is streamlined and facilitated by synthetic plasmid constructs, is an alternative process at industrial scale. However, metabolic stress and the resulting production escape mechanisms in evolving populations are severely limiting factors during industrial biomanufacturing. We emulate high generation numbers typically reached in industrial fermentation processes with Escherichia coli harbouring L-cysteine production plasmid constructs. So far no genotypic and phenotypic alterations in early and late L-cysteine producing E. coli populations have been studied.

RESULTS

In a comparative experimental design, the E. coli K12 production strain W3110 and the reduced genome strain MDS42, almost free of insertion sequences, were used as hosts. Data indicates that W3110 populations acquire growth fitness at the expense of L-cysteine productivity within 60 generations, while production in MDS42 populations remains stable. For the first time, the negative impact of predominantly insertion sequence family 3 and 5 transposases on L-cysteine production is reported, by combining differential transcriptome analysis with NGS based deep plasmid sequencing. Furthermore, metabolic clustering of differentially expressed genes supports the hypothesis, that metabolic stress induces rapid propagation of plasmid rearrangements, leading to reduced L-cysteine yields in evolving populations over industrial fermentation time scales.

CONCLUSION

The results of this study implicate how selective deletion of insertion sequence families could be a new route for improving industrial L-cysteine or even general amino acid production using recombinant E. coli hosts. Instead of using minimal genome strains, a selective deletion of certain IS families could offer the benefits of adaptive laboratory evolution (ALE) while maintaining enhanced L-cysteine production stability.

Insertion-sequence-mediated mutations both promote and constrain evolvability during a long-term experiment with bacteria

Insertion sequences (IS) are ubiquitous bacterial mobile genetic elements, and the mutations they cause can be deleterious, neutral, or beneficial. The long-term dynamics of IS elements and their effects on bacteria are poorly understood, including whether they are primarily genomic parasites or important drivers of adaptation by natural selection. Here, we investigate the dynamics of IS elements and their contribution to genomic evolution and fitness during a long-term experiment with Escherichia coli. IS elements account for ~35% of the mutations that reached high frequency through 50,000 generations in those populations that retained the ancestral point-mutation rate. In mutator populations, IS-mediated mutations are only half as frequent in absolute numbers. In one population, an exceptionally high ~8-fold increase in IS150 copy number is associated with the beneficial effects of early insertion mutations; however, this expansion later slowed down owing to reduced IS150 activity. This population also achieves the lowest fitness, suggesting that some avenues for further adaptation are precluded by the IS150-mediated mutations. More generally, across all populations, we find that higher IS activity becomes detrimental to adaptation over evolutionary time. Therefore, IS-mediated mutations can both promote and constrain evolvability.

Insertion sequences (IS) are common mobile genetic elements in bacteria, but their effects on bacterial evolution are not well understood. Here, Consuegra and colleagues investigate the dynamics and fitness consequences of IS elements in E. coli over 50,000 generations.

ISKpn40-Mediated Mobilization of the Colistin Resistance Gene mcr-3.11 in Escherichia coli

The mobile colistin resistance gene mcr-3 has globally disseminated since it was first reported in 2017 in Escherichia coli In vitro mobilization assays in this study demonstrate the functionality of the composite transposon structure ISKpn40-mcr-3.11-dgkA-ISKpn40 in wild-type and recA ^- E. coli strains. These transpositions generated 4-bp duplications at the target sites. This is the first report demonstrating the mobility of the mcr-3.11 gene by transposition.

Identification, Characterization, and Genomic Analysis of Novel Serratia Temperate Phages from a Gold Mine

Bacteria of the genus Serratia inhabit a variety of ecological niches like water, soil, and the bodies of animals, and have a wide range of lifestyles. Currently, the complete genome sequences of 25 Serratia phages are available in the NCBI database. All of them were isolated from nutrient-rich environments like sewage, with the use of clinical Serratia strains as hosts. In this study, we identified a novel Serratia myovirus named vB_SspM_BZS1. Both the phage and its host Serratia sp. OS31 were isolated from the same oligotrophic environment, namely, an abandoned gold mine (Zloty Stok, Poland). The BZS1 phage was thoroughly characterized here in terms of its genomics, morphology, and infection kinetics. We also demonstrated that Serratia sp. OS31 was lysogenized by mitomycin-inducible siphovirus vB_SspS_OS31. Comparative analyses revealed that vB_SspM_BZS1 and vB_SspS_OS31 were remote from the known Serratia phages. Moreover, vB_SspM_BZS1 was only distantly related to other viruses. However, we discovered similar prophage sequences in genomes of various bacteria here. Additionally, a protein-based similarity network showed a high diversity of Serratia phages in general, as they were scattered across nineteen different clusters. In summary, this work broadened our knowledge on the diverse relationships of Serratia phages.

Firmicutes-enriched IS1447 represents a group of IS3-family insertion sequences exhibiting unique + 1 transcriptional slippage

BACKGROUND

Bacterial insertion sequences (ISs) are ubiquitous mobile genetic elements that play important roles in genome plasticity, cell adaptability, and function evolution. ISs of various families and subgroups contain significantly diverse molecular features and functional mechanisms that are not fully understood.

RESULTS

IS1447 is a member of the widespread IS3 family and was previously detected to have transposing activity in a typical thermophilic and cellulolytic microorganism Clostridium thermocellum. Phylogenetic analysis showed that IS1447-like elements are widely distributed in Firmicutes and possess unique features in the IS3 family. Therefore, IS1447 may represent a novel subgroup of the IS3 family. Unlike other well-known IS3 subgroups performing programmed - 1 translational frameshifting for the expression of the transposase, IS1447 exhibits transcriptional slippage in both the + 1 and - 1 directions, each with a frequency of ~ 16%, and only + 1 slippage results in full-length and functional transposase. The slippage-prone region of IS1447 contains a run of nine A nucleotides following a stem-loop structure in mRNA, but mutagenesis analysis indicated that seven of them are sufficient for the observed slippage. Western blot analysis indicated that IS1447 produces three types of transposases with alternative initiations. Furthermore, the IS1447-subgroup elements are abundant in the genomes of several cellulolytic bacteria.

CONCLUSION

Our result indicated that IS1447 represents a new Firmicutes-enriched subgroup of the IS3 family. The characterization of the novel IS3-family member will enrich our understanding of the transposition behavior of IS elements and may provide insight into developing IS-based mutagenesis tools for thermophiles.

Heterogeneous and Flexible Transmission of mcr-1 in Hospital-Associated Escherichia coli

The recent emergence of a transferable colistin resistance mechanism, MCR-1, has gained global attention because of its threat to clinical treatment of infections caused by multidrug-resistant Gram-negative bacteria. However, the possible transmission route of mcr-1 among Enterobacteriaceae species in clinical settings is largely unknown. Here, we present a comprehensive genomic analysis of Escherichia coli isolates collected in a hospital in Hangzhou, China. We found that mcr-1-carrying isolates from clinical infections and feces of inpatients and healthy volunteers were genetically diverse and were not closely related phylogenetically, suggesting that clonal expansion is not involved in the spread of mcr-1. The mcr-1 gene was found on either chromosomes or plasmids, but in most of the E. coli isolates, mcr-1 was carried on plasmids. The genetic context of the plasmids showed considerable diversity as evidenced by the different functional insertion sequence (IS) elements, toxin-antitoxin (TA) systems, heavy metal resistance determinants, and Rep proteins of broad-host-range plasmids. Additionally, the genomic analysis revealed nosocomial transmission of mcr-1 and the coexistence of mcr-1 with other genes encoding β-lactamases and fluoroquinolone resistance in the E. coli isolates. These findings indicate that mcr-1 is heterogeneously disseminated in both commensal and pathogenic strains of E. coli, suggest the high flexibility of this gene in its association with diverse genetic backgrounds of the hosts, and provide new insights into the genome epidemiology of mcr-1 among hospital-associated E. coli strains.

Colistin represents one of the very few available drugs for treating infections caused by extensively multidrug-resistant Gram-negative bacteria. The recently emergent mcr-1 colistin resistance gene threatens the clinical utility of colistin and has gained global attention. How mcr-1 spreads in hospital settings remains unknown and was investigated by whole-genome sequencing of mcr-1-carrying Escherichia coli in this study. The findings revealed extraordinary flexibility of mcr-1 in its spread among genetically diverse E. coli hosts and plasmids, nosocomial transmission of mcr-1-carrying E. coli, and the continuous emergence of novel Inc types of plasmids carrying mcr-1 and new mcr-1 variants. Additionally, mcr-1 was found to be frequently associated with other genes encoding β-lactams and fluoroquinolone resistance. These findings provide important information on the transmission and epidemiology of mcr-1 and are of significant public health importance as the information is expected to facilitate the control of this significant antibiotic resistance threat.

Colocation of the Polymyxin Resistance Gene mcr-1 and a Variant of mcr-3 on a Plasmid in an Escherichia coli Isolate from a Chicken Farm

A colistin-resistant Escherichia coli isolate from a commercial poultry farm in China carried two colistin resistance genes, mcr-1 and variant of mcr-3, in an IncP plasmid. The variant of the mcr-3 gene, named mcr-3.11, encoded two amino acid substitutions compared with the mcr-3 gene. A novel genetic structure, ISKpn40-mcr-3-dgkA-ISKpn40, might be the key element mediating the translocation of mcr-3 through the formation of a circular form. The mcr-1 and mcr-3 genes, which are colocated on a plasmid, might pose a huge threat to public health.

Helraiser intermediates provide insight into the mechanism of eukaryotic replicative transposition

Helitrons are eukaryotic DNA transposons that have profoundly affected genome variability via capture and mobilization of host genomic sequences. Defining their mode of action is therefore important for understanding how genome landscapes evolve. Sequence similarities with certain prokaryotic mobile elements suggest a “rolling circle” mode of transposition, involving only a single transposon strand. Using the reconstituted Helraiser transposon to study Helitron transposition in cells and in vitro, we show that the donor site must be double-stranded and that single-stranded donors will not suffice. Nevertheless, replication and integration assays demonstrate the use of only one of the transposon donor strands. Furthermore, repeated reuse of Helraiser donor sites occurs following DNA synthesis. In cells, circular double-stranded intermediates that serve as transposon donors are generated and replicated by Helraiser transposase. Cell-free experiments demonstrate strand-specific cleavage and strand transfer, supporting observations made in cells.

Helitrons are eukaryotic DNA transposons that have profoundly affected genome variation due to their ability to capture and mobilize host genomic fragments. Here the authors provide insight into the mechanism of action of these transposons both in cells and in vitro.

Characterization of a functional insertion sequence ISSau2 from Staphylococcus aureus

Background

ISSau2 has been suggested as a member of the IS150 f subgroup in the IS3 family. It encodes a fusion transposase OrfAB produced by programmed − 1 translational frameshifting with two overlapping reading frames orfA and orfB. To better characterize ISSau2, the binding and cleaving activities of the ISSau2 transposase and its transposition frequency were studied.

Results

The purified ISSau2 transposase OrfAB was a functional protein in vitro since it bound specifically to ISSau2 terminal inverted repeat sequences (IRs) and cleaved the transposon ends at the artificial mini-transposon pUC19-IRL-gfp-IRR. In addition, the transposition frequency of ISSau2 in vivo was approximately 1.76 ± 0.13 × 10^− 3, based on a GFP hop-on assay. Furthermore, OrfB cleaved IRs with the similar catalytic activity of OrfAB, while OrfA had no catalytic activity. Finally, either OrfA or OrfB significantly reduced the transposition of ISSau2 induced by OrfAB.

Conclusion

We have confirmed that ISSau2 is a member of IS150/IS3 family. The ISSau2 transposase OrfAB could bind to and cleave the specific fragments containing the terminal inverted repeat sequences and induce the transposition, suggesting that ISSau2 is at least partially functional. Meanwhile, both OrfA and OrfB inhibited the transposition by ISSau2. Our results will help understand biological roles of ISSau2 in its host S. aureus.

Anaerobically Grown Escherichia coli Has an Enhanced Mutation Rate and Distinct Mutational Spectra

Oxidative stress is a major cause of mutation but little is known about how growth in the absence of oxygen impacts the rate and spectrum of mutations. We employed long-term mutation accumulation experiments to directly measure the rates and spectra of spontaneous mutation events in Escherichia coli populations propagated under aerobic and anaerobic conditions. To detect mutations, whole genome sequencing was coupled with methods of analysis sufficient to identify a broad range of mutational classes, including structural variants (SVs) generated by movement of repetitive elements. The anaerobically grown populations displayed a mutation rate nearly twice that of the aerobic populations, showed distinct asymmetric mutational strand biases, and greater insertion element activity. Consistent with mutation rate and spectra observations, genes for transposition and recombination repair associated with SVs were up-regulated during anaerobic growth. Together, these results define differences in mutational spectra affecting the evolution of facultative anaerobes.

Copy-out-Paste-in Transposition of IS911: A Major Transposition Pathway

IS911 has provided a powerful model for studying the transposition of members of a large class of transposable element: the IS3 family of bacterial Insertion Sequences (IS). These transpose by a Copy-out-Paste-in mechanism in which a double-strand IS circle transposition intermediate is generated from the donor site by replication and proceeds to integrate into a suitable double strand DNA target. This is perhaps one of the most common transposition mechanisms known to date. Copy-out-Paste-in transposition has been adopted by members of at least eight large IS families. This chapter details the different steps of the Copy-out-Paste-in mechanism involved in IS911 transposition. At a more biological level it also describes various aspects of regulation of the transposition process. These include transposase production by programmed translational frameshifting, transposase expression from the circular intermediate using a specialized promoter assembled at the circle junction and binding of the nascent transposase while it remains attached to the ribosome during translation (co-translational binding). This co-translational binding of the transposase to neighboring IS ends provides an explanation for the longstanding observation that transposases show a cis-preference for their activities.

Protein-DNA interactions define the mechanistic aspects of circle formation and insertion reactions in IS2 transposition

BACKGROUND

Transposition in IS3, IS30, IS21 and IS256 insertion sequence (IS) families utilizes an unconventional two-step pathway. A figure-of-eight intermediate in Step I, from asymmetric single-strand cleavage and joining reactions, is converted into a double-stranded minicircle whose junction (the abutted left and right ends) is the substrate for symmetrical transesterification attacks on target DNA in Step II, suggesting intrinsically different synaptic complexes (SC) for each step. Transposases of these ISs bind poorly to cognate DNA and comparative biophysical analyses of SC I and SC II have proven elusive. We have prepared a native, soluble, active, GFP-tagged fusion derivative of the IS2 transposase that creates fully formed complexes with single-end and minicircle junction (MCJ) substrates and used these successfully in hydroxyl radical footprinting experiments.

RESULTS

In IS2, Step I reactions are physically and chemically asymmetric; the left imperfect, inverted repeat (IRL), the exclusive recipient end, lacks donor function. In SC I, different protection patterns of the cleavage domains (CDs) of the right imperfect inverted repeat (IRR; extensive in cis) and IRL (selective in trans) at the single active cognate IRR catalytic center (CC) are related to their donor and recipient functions. In SC II, extensive binding of the IRL CD in trans and of the abutted IRR CD in cis at this CC represents the first phase of the complex. An MCJ substrate precleaved at the 3' end of IRR revealed a temporary transition state with the IRL CD disengaged from the protein. We propose that in SC II, sequential 3' cleavages at the bound abutted CDs trigger a conformational change, allowing the IRL CD to complex to its cognate CC, producing the second phase. Corroborating data from enhanced residues and curvature propensity plots suggest that CD to CD interactions in SC I and SC II require IRL to assume a bent structure, to facilitate binding in trans.

CONCLUSIONS

Different transpososomes are assembled in each step of the IS2 transposition pathway. Recipient versus donor end functions of the IRL CD in SC I and SC II and the conformational change in SC II that produces the phase needed for symmetrical IRL and IRR donor attacks on target DNA highlight the differences.

Soluble expression, purification and characterization of the full length IS2 Transposase

BACKGROUND

The two-step transposition pathway of insertion sequences of the IS3 family, and several other families, involves first the formation of a branched figure-of-eight (F-8) structure by an asymmetric single strand cleavage at one optional donor end and joining to the flanking host DNA near the target end. Its conversion to a double stranded minicircle precedes the second insertional step, where both ends function as donors. In IS2, the left end which lacks donor function in Step I acquires it in Step II. The assembly of two intrinsically different protein-DNA complexes in these F-8 generating elements has been intuitively proposed, but a barrier to testing this hypothesis has been the difficulty of isolating a full length, soluble and active transposase that creates fully formed synaptic complexes in vitro with protein bound to both binding and catalytic domains of the ends. We address here a solution to expressing, purifying and structurally analyzing such a protein.

RESULTS

A soluble and active IS2 transposase derivative with GFP fused to its C-terminus functions as efficiently as the native protein in in vivo transposition assays. In vitro electrophoretic mobility shift assay data show that the partially purified protein prepared under native conditions binds very efficiently to cognate DNA, utilizing both N- and C-terminal residues. As a precursor to biophysical analyses of these complexes, a fluorescence-based random mutagenesis protocol was developed that enabled a structure-function analysis of the protein with good resolution at the secondary structure level. The results extend previous structure-function work on IS3 family transposases, identifying the binding domain as a three helix H + HTH bundle and explaining the function of an atypical leucine zipper-like motif in IS2. In addition gain- and loss-of-function mutations in the catalytic active site define its role in regional and global binding and identify functional signatures that are common to the three dimensional catalytic core motif of the retroviral integrase superfamily.

CONCLUSIONS

Intractably insoluble transposases, such as the IS2 transposase, prepared by solubilization protocols are often refractory to whole protein structure-function studies. The results described here have validated the use of GFP-tagging and fluorescence-based random mutagenesis in overcoming this limitation at the secondary structure level.

A pilot study of bacterial genes with disrupted ORFs reveals a surprising profusion of protein sequence recoding mediated by ribosomal frameshifting and transcriptional realignment

Bacterial genome annotations contain a number of coding sequences (CDSs) that, in spite of reading frame disruptions, encode a single continuous polypeptide. Such disruptions have different origins: sequencing errors, frameshift, or stop codon mutations, as well as instances of utilization of nontriplet decoding. We have extracted over 1,000 CDSs with annotated disruptions and found that about 75% of them can be clustered into 64 groups based on sequence similarity. Analysis of the clusters revealed deep phylogenetic conservation of open reading frame organization as well as the presence of conserved sequence patterns that indicate likely utilization of the nonstandard decoding mechanisms: programmed ribosomal frameshifting (PRF) and programmed transcriptional realignment (PTR). Further enrichment of these clusters with additional homologous nucleotide sequences revealed over 6,000 candidate genes utilizing PRF or PTR. Analysis of the patterns of conservation apparently associated with nontriplet decoding revealed the presence of both previously characterized frameshift-prone sequences and a few novel ones. Since the starting point of our analysis was a set of genes with already annotated disruptions, it is highly plausible that in this study, we have identified only a fraction of all bacterial genes that utilize PRF or PTR. In addition to the identification of a large number of recoded genes, a surprising observation is that nearly half of them are expressed via PTR-a mechanism that, in contrast to PRF, has not yet received substantial attention.

Characterization of a T5-like coliphage, SPC35, and differential development of resistance to SPC35 in Salmonella enterica serovar typhimurium and Escherichia coli

The potential of bacteriophage as an alternative biocontrol agent has recently been revisited due to the widespread occurrence of antibiotic-resistant bacteria. We isolated a virulent bacteriophage, SPC35, that can infect both Salmonella enterica serovar Typhimurium and Escherichia coli. Morphological analysis by transmission electron microscopy and analysis of its 118,351-bp genome revealed that SPC35 is a T5 group phage belonging to the family Siphoviridae. BtuB, the outer membrane protein for vitamin B(12) uptake, was found to be a host receptor for SPC35. Interestingly, resistant mutants of both E. coli and S. Typhimurium developed faster than our expectation when the cultures were infected with SPC35. Investigation of the btuB gene revealed that it was disrupted by the IS2 insertion sequence element in most of the resistant E. coli isolates. In contrast, we could not detect any btuB gene mutations in the resistant S. Typhimurium isolates; these isolates easily regained sensitivity to SPC35 in its absence, suggesting phase-variable phage resistance/sensitivity. These results indicate that a cocktail of phages that target different receptors on the pathogen should be more effective for successful biocontrol.

Inference of the impact of insertion sequence (IS) elements on bacterial genome diversification through analysis of small-size structural polymorphisms in Escherichia coli O157 genomes

Mobile genetic elements play important roles in the evolution and diversification of bacterial genomes. In enterohemorrhagic Escherichia coli O157, a major factor that affects genomic diversity is prophages, which generate most of the large-size structural polymorphisms (LSSPs) observed in O157 genomes. Here, we describe the results of a systematic analysis of numerous small-size structural polymorphisms (SSSPs) that were detected by comparing the genomes of eight clinical isolates with a sequenced strain, O157 Sakai. Most of the SSSPs were generated by genetic events associated with only two insertion sequence (IS) elements, IS629 and ISEc8, and a number of genes that were inactivated or deleted by these events were identified. Simple excisions of IS629 and small deletions (footprints) formed by the excision of IS629, both of which are rarely described in bacteria, were also detected. In addition, the distribution of IS elements was highly biased toward prophages, prophage-like integrative elements, and plasmids. Based on these and our previous results, we conclude that, in addition to prophages, these two IS elements are major contributors to the genomic diversification of O157 strains and that LSSPs have been generated mainly by bacteriophages and SSSPs by IS elements. We also suggest that IS elements possibly play a role in the inactivation and immobilization of incoming phages and plasmids. Taken together, our results reveal the true impact of IS elements on the diversification of bacterial genomes and highlight their novel role in genome evolution.

Transposition of a bacterial insertion sequence in chloroplasts

Bacterial transposable elements (IS elements, transposons) represent an important determinant of genome structure and dynamics, and are a major force driving genome evolution. Here, we have tested whether bacterial insertion sequences (IS elements) can transpose in a prokaryotic compartment of the plant cell, the plastid (chloroplast). Using plastid transformation, we have integrated different versions of the Escherichia coli IS element IS150 into the plastid genome of tobacco (Nicotiana tabacum) plants. We show that IS150 is faithfully mobilized inside the chloroplast, and that enormous quantities of transposition intermediates accumulate. As synthesis of the IS150 transposase is dependent upon programmed ribosomal frame shifting, our data indicate that this process also occurs in chloroplasts. Interestingly, all insertion events detected affect a single site in the plastid genome, suggesting that the integration of IS150 is highly sequence dependent. In contrast, the initiation of the transposition process was found to be independent of the sequence context. Finally, our data also demonstrate that plastids lack the capacity to repair double-strand breaks in their genomes by non-homologous end joining, a finding that has important implications for genome stability, and which may explain the peculiar immunity of the plastid to invading promiscuous DNA sequences of nuclear and mitochondrial origin.

Formation of an inverted repeat junction in the transposition of insertion sequence ISLC3 isolated from Lactobacillus casei

An insertion sequence, ISLC3, of 1351 bp has been isolated from Lactobacillus casei. Formation of IS circles containing a 3 bp spacer (complete junction) or deletion of 25 bp at the left inverted repeat (IRL) between the abutted IS ends of the ISLC3 junction region (deleted junction) was also discovered in the lactobacilli and Escherichia coli system studied. We found that the promoter formed by the complete junction P(jun) was more active than that formed by the 25 bp deleted junction P(djun) or the indigenous promoter P(IRL). The corresponding transcription start sites for both promoter P(jun) and P(IRL) as well as P(djun) were subsequently determined using a primer extension assay. The activity of transposase OrfAB of ISLC3 was also assayed using an in vitro system. It was found that this transposase preferred to cleave a single DNA strand at the IRR over the IRL end in the transposition process, suggesting that attack of one end by the other was oriented from IRR to IRL.

The role of IS6110 in the evolution of Mycobacterium tuberculosis

Members of the Mycobacterium tuberculosis complex contain the transposable element IS6110 which, due to its high numerical and positional polymorphism, has become a widely used marker in epidemiological studies. Here, we review the evidence that IS6110 is not simply a passive or 'junk' DNA sequence, but that, through its transposable activity, it is able to generate genotypic variation that translates into strain-specific phenotypic variation. We also speculate on the role that this variation has played in the evolution of M. tuberculosis and conclude that the presence of a moderate IS6110 copy number within the genome may provide the pathogen with a selective advantage that has aided its virulence.

Characterization of the variants, flanking genes, and promoter activity of the Leifsonia xyli subsp. cynodontis insertion sequence IS1237

We performed a comprehensive study of the distribution and function of an insertion sequence (IS) element, IS1237, in the genome of Leifsonia xyli subsp. cynodontis, a useful genetic carrier for expressing beneficial foreign genes in plants. Two shorter IS1237 isoforms, IS1237d1 and IS1237d2 resulting from precise deletion between two nonperfect repeats, were found in the bacterial genome at a level that was one-fifth the level of wild-type IS1237. Both the genome and native plasmid pCXC100 harbor a truncated toxin-antitoxin cassette that is precisely fused with a 5'-truncated IS1237 sequence at one nonperfect repeat, indicating that it is a hot site for DNA rearrangement. Nevertheless, no transposition activity was detected when the putative transposase of IS1237 was overexpressed in Escherichia coli. Using thermal asymmetric interlaced PCR, we identified 13 upstream and 10 downstream unique flanking sequences, and two pairs of these sequences were from the same loci, suggesting that IS1237 has up to 65 unique loci in the L. xyli subsp. cynodontis chromosome. The presence of TAA or TTA direct repeat sequences at most insertion sites indicated that IS1237 inserts into the loci by active transposition. IS1237 showed a high propensity for insertion into other IS elements, such as ISLxc1 and ISLxc2, which could offer IS1237 a nonautonomous transposition pathway through the host IS elements. Interestingly, we showed that IS1237 has a strong promoter at the 3' end and a weak promoter at the 5' end, and both promoters promote the transcription of adjacent genes in different gram-positive bacteria. The high-copy-number nature of IS1237 and its promoter activity may contribute to bacterial fitness.

Requirement of IS911 replication before integration defines a new bacterial transposition pathway

Movement of transposable elements is often accompanied by replication to ensure their proliferation. Replication is associated with both major classes of transposition mechanisms: cut-and-paste and cointegrate formation (paste-and-copy). Cut-and-paste transposition is often activated by replication of the transposon, while in cointegrate formation replication completes integration. We describe a novel transposition mechanism used by insertion sequence IS911, which we call copy-and-paste. IS911 transposes using a circular intermediate (circle), which then integrates into a target. We demonstrate that this is derived from a branched intermediate (figure-eight) in which both ends are joined by a single-strand bridge after a first-strand transfer. In vivo labelling experiments show that the process of circle formation is replicative. The results indicate that the replication pathway not only produces circles from figure-eight but also regenerates the transposon donor plasmid. To confirm the replicative mechanism, we have also used the Escherichia coli terminators (terC) which, when bound by the Tus protein, inhibit replication forks in a polarised manner. Finally, we demonstrate that the primase DnaG is essential, implicating a host-specific replication pathway.

Identification and distribution of insertion sequences of Paracoccus solventivorans

Three novel insertion sequences (ISs) (ISPso1, ISPso2, and ISPso3) of the soil bacterium Paracoccus solventivorans DSM 11592 were identified by transposition into entrapment vector pMEC1. ISPso1 (1,400 bp) carries one large open reading frame (ORF) encoding a putative basic protein (with a DDE motif conserved among transposases [Tnps] of elements belonging to the IS256 family) with the highest levels of similarity with the hypothetical Tnps of Rhodospirillum rubrum and Sphingopyxis macrogoltabida. ISPso2 (832 bp) appeared to be closely related to ISPpa2 of Paracoccus pantotrophus DSM 11072 and IS1248 of Paracoccus denitrificans PdX22, both of which belong to the IS427 group (IS5 family). These elements contain two overlapping ORFs and a putative frameshift motif (AAAAG) responsible for production of a putative transframe Tnp. ISPso3 (1,286 bp) contains a single ORF, whose putative product showed homology with Tnps of ISs classified as members of a distinct subgroup of the IS5 group of the IS5 family. The highest levels of similarity were observed with ISSsp126 of Sphingomonas sp. and IS1169 of Bacteroides fragilis. Analysis of the distribution of ISs of P. solventivorans revealed that ISPso2-like elements are the most widely spread of the elements in nine species of the genus PARACOCCUS: ISPso1 and ISPso3 are present in only a few paracoccal strains, which suggests that they were acquired by lateral transfer. Phylogenetic analysis of Tnps of the novel ISs and their closest relatives showed their evolutionary relationships and possible directions of lateral transfer between various bacterial hosts.

Inversion within the haloalkaliphilic virus φCh1 DNA results in differential expression of structural proteins

The sequence of phi Ch1 contains an open reading frame (int1) in the central part of its genome that belongs to the lambda integrase family of site-specific recombinases. Sequence similarities to known integrases include the highly conserved tetrad R-H-R-Y. The flanking sequences of int1 contain several direct repeats of 30 bp in length (IR-L and IR-R), which are orientated in an inverted direction. Here, we show that a recombination active region exists in the genome of phi Ch1: the number of those repeats, non-homologous regions within the repeat clusters IR-L and IR-R and the orientation of the int1 gene vary in a given virus population. Within this study, we identified circular intermediates, composed of the int1 gene and the inwards orientated repeat regions IR-L and IR-R, which could be involved in the recombination process itself. IR-L and IR-R are embedded within ORF34 and ORF36 respectively. As a consequence of the inversion within this region of phi Ch1, the C-terminal parts of the proteins encoded by ORF34 and 36 are exchanged. Both proteins, expressed in Escherichia coli, interact with specific antisera against whole virus particles, indicating that they could be parts of phi Ch1 virions. Expression of the protein(s) in Natrialba magadii could be detected 98 h after inoculation, which is similar to other structural proteins of phi Ch1. Taken together, the data show that the genome of phi Ch1 contains an invertible region that codes for a recombinase and structural proteins. Inversion of this segment results in a variation of these structural proteins.

The left end of IS2: a compromise between transpositional activity and an essential promoter function that regulates the transposition pathway

Cut-and-paste (simple insertion) and replicative transposition pathways are the two classical paradigms by which transposable elements are mobilized. A novel variation of cut and paste, a two-step transposition cycle, has recently been proposed for insertion sequences of the IS3 family. In IS2 this variation involves the formation of a circular, putative transposition intermediate (the minicircle) in the first step. Two aspects of the minicircle may involve its proposed role in the second step (integration into the target). The first is the presence of a highly reactive junction formed by the two abutted ends of the element. The second is the assembly at the minicircle junction of a strong hybrid promoter which generates higher levels of transposase. In this report we show that IS2 possesses a highly reactive minicircle junction at which a strong promoter is assembled and that the promoter is needed for the efficient completion of the pathway. We show that the sequence diversions which characterize the imperfect inverted repeats or ends of this element have evolved specifically to permit the formation and optimal function of this promoter. While these sequence diversions eliminate catalytic activity of the left end (IRL) in the linear element, sufficient sequence information essential for catalysis is retained by the IRL in the context of the minicircle junction. These data confirm that the minicircle is an essential intermediate in the two-step transposition pathway of IS2.

Identification and characterization of transposable elements of Paracoccus pantotrophus

We studied diversity and distribution of transposable elements residing in different strains (DSM 11072, DSM 11073, DSM 65, and LMD 82.5) of a soil bacterium Paracoccus pantotrophus (alpha-Proteobacteria). With application of a shuttle entrapment vector pMEC1, several novel insertion sequences (ISs) and transposons (Tns) have been identified. They were sequenced and subjected to detailed comparative analysis, which allowed their characterization (i.e., identification of transposase genes, terminal inverted repeats, as well as target sequences) and classification into the appropriate IS or Tn families. The frequency of transposition of these elements varied and ranged from 10(-6) to 10(-3) depending on the strain. The copy number, localization (plasmid or chromosome), and distribution of these elements in the Paracoccus species P. pantotrophus, P. denitrificans, P. methylutens, P. solventivorans, and P. versutus were analyzed. This allowed us to distinguish elements that are common in paracocci (ISPpa2, ISPpa3--both of the IS5 family--and ISPpa5 of IS66 family) as well as strain-specific ones (ISPpa1 of the IS256 family, ISPpa4 of the IS5 family, and Tn3434 and Tn5393 of the Tn3 family), acquired by lateral transfer events. These elements will be of a great value in the design of new genetic tools for paracocci, since only one element (IS1248 of P. denitrificans) has been described so far in this genus.

Detection and analysis of transpositionally active head-to-tail dimers in three additional Escherichia coli IS elements

This study demonstrates that Escherichia coli insertion elements IS3, IS150 and IS186 are able to form transpositionally active head-to-tail dimers which show similar structure and transpositional activity to the dimers of IS2, IS21 and IS30. These structures arise by joining of the left and right inverted repeats (IRs) of two elements. The resulting junction includes a spacer region (SR) of a few base pairs derived from the flanking sequence of one of the reacting IRs. Head-to-tail dimers of IS3, IS150 and IS186 are unstable due to their transpositional activity. They can be resolved in two ways that seem to form a general rule for those elements reported to form dimers. One way is a site-specific process (dimer dissolution) which is accompanied by the loss of one IS copy along with the SR. The other is 'classical' transposition where the joined ends integrate into the target DNA. In intramolecular transposition this often gives rise to deletion formation, whereas in intermolecular transposition it gives rise to replicon fusion. The results presented for IS3, IS150 and IS186 are in accordance with the IS dimer model, which is in turn consistent with models based on covalently closed minicircles.