Organization of FliN subunits in the flagellar motor of Escherichia coli

Rotation of the Fla2 flagella of Cereibacter sphaeroides requires the periplasmic proteins MotK and MotE that interact with the flagellar stator protein MotB2

The bacterial flagellum is a complex structure formed by more than 25 different proteins, this appendage comprises three conserved structures: the basal body, the hook and filament. The basal body, embedded in the cell envelope, is the most complex structure and houses the export apparatus and the motor. In situ images of the flagellar motor in different species have revealed a huge diversity of structures that surround the well-conserved periplasmic components of the basal body. The identity of the proteins that form these novel structures in many cases has been elucidated genetically and biochemically, but in others they remain to be identified or characterized. In this work, we report that in the alpha proteobacteria Cereibacter sphaeroides the novel protein MotK along with MotE are essential for flagellar rotation. We show evidence that these periplasmic proteins interact with each other and with MotB2. Moreover, these proteins localize to the flagellated pole and MotK localization is dependent on MotB2 and MotA2. These results together suggest that the role of MotK and MotE is to activate or recruit the flagellar stators to the flagellar structure.

Precise Measurement of the Stoichiometry of the Adaptive Bacterial Flagellar Switch

The cytoplasmic ring (C-ring) of the bacterial flagellar motor controls the motor rotation direction, thereby controlling bacterial run-and-tumble behavior. The C-ring has been shown to undergo adaptive remodeling in response to changes in motor directional bias. However, the stoichiometry and arrangement of the C-ring is still unclear due to contradiction between the results from fluorescence studies and cryo-electron microscopy (cryo-EM) structural analysis. Here, by using the copy number of FliG molecules (34) in the C-ring as a reference, we precisely measured the copy numbers of FliM molecules in motors rotating exclusively counterclockwise (CCW) and clockwise (CW). We surprisingly found that there are on average 45 and 58 FliM molecules in CW and CCW rotating motors, respectively, which are much higher than previous estimates. Our results suggested a new mechanism of C-ring adaptation, that is, extra FliM molecules could be bound to the primary C-ring with probability depending on the motor rotational direction. We further confirmed that all of the FliM molecules in the C-ring function in chemotaxis signaling transduction because all of them could be bound by the chemotactic response regulator CheY-P. Our measurements provided new insights into the structure and arrangement of the flagellar switch. IMPORTANCE The bacterial flagellar switch can undergo adaptive remodeling in response to changes in motor rotation direction, thereby shifting its operating point to match the output of the chemotaxis signaling pathway. However, it remains unclear how the flagellar switch accomplishes this adaptive remodeling. Here, via precise fluorescence studies, we measured the absolute copy numbers of the critical component in the switch for motors rotating counterclockwise and clockwise, obtaining much larger numbers than previous relative estimates. Our results suggested a new mechanism of adaptive remodeling of the flagellar switch and provided new insights for updating the conformation spread model of the switch.

Structural Conservation and Adaptation of the Bacterial Flagella Motor

Many bacteria require flagella for the ability to move, survive, and cause infection. The flagellum is a complex nanomachine that has evolved to increase the fitness of each bacterium to diverse environments. Over several decades, molecular, biochemical, and structural insights into the flagella have led to a comprehensive understanding of the structure and function of this fascinating nanomachine. Notably, X-ray crystallography, cryo-electron microscopy (cryo-EM), and cryo-electron tomography (cryo-ET) have elucidated the flagella and their components to unprecedented resolution, gleaning insights into their structural conservation and adaptation. In this review, we focus on recent structural studies that have led to a mechanistic understanding of flagellar assembly, function, and evolution.

Assembly and Dynamics of the Bacterial Flagellum

The bacterial flagellar motor is the most complex structure in the bacterial cell, driving the ion-driven rotation of the helical flagellum. The ordered expression of the regulon and the assembly of the series of interacting protein rings, spanning the inner and outer membranes to form the ∼45–50-nm protein complex, have made investigation of the structure and mechanism a major challenge since its recognition as a rotating nanomachine about 40 years ago. Painstaking molecular genetics, biochemistry, and electron microscopy revealed a tiny electric motor spinning in the bacterial membrane. Over the last decade, new single-molecule and in vivo biophysical methods have allowed investigation of the stability of this and other large protein complexes, working in their natural environment inside live cells. This has revealed that in the bacterial flagellar motor, protein molecules in both the rotor and stator exchange with freely circulating pools of spares on a timescale of minutes, even while motors are continuously rotating. This constant exchange has allowed the evolution of modified components allowing bacteria to keep swimming as the viscosity or the ion composition of the outside environment changes.

Diversification of Campylobacter jejuni Flagellar C-Ring Composition Impacts Its Structure and Function in Motility, Flagellar Assembly, and Cellular Processes

Bacterial flagella are reversible rotary motors that rotate external filaments for bacterial propulsion. Some flagellar motors have diversified by recruiting additional components that influence torque and rotation, but little is known about the possible diversification and evolution of core motor components. The mechanistic core of flagella is the cytoplasmic C ring, which functions as a rotor, directional switch, and assembly platform for the flagellar type III secretion system (fT3SS) ATPase. The C ring is composed of a ring of FliG proteins and a helical ring of surface presentation of antigen (SPOA) domains from the switch proteins FliM and one of two usually mutually exclusive paralogs, FliN or FliY. We investigated the composition, architecture, and function of the C ring of Campylobacter jejuni, which encodes FliG, FliM, and both FliY and FliN by a variety of interrogative approaches. We discovered a diversified C. jejuni C ring containing FliG, FliM, and both FliY, which functions as a classical FliN-like protein for flagellar assembly, and FliN, which has neofunctionalized into a structural role. Specific protein interactions drive the formation of a more complex heterooligomeric C. jejuni C-ring structure. We discovered that this complex C ring has additional cellular functions in polarly localizing FlhG for numerical regulation of flagellar biogenesis and spatial regulation of division. Furthermore, mutation of the C. jejuni C ring revealed a T3SS that was less dependent on its ATPase complex for assembly than were other systems. Our results highlight considerable evolved flagellar diversity that impacts motor output, biogenesis, and cellular processes in different species.IMPORTANCE The conserved core of bacterial flagellar motors reflects a shared evolutionary history that preserves the mechanisms essential for flagellar assembly, rotation, and directional switching. In this work, we describe an expanded and diversified set of core components in the Campylobacter jejuni flagellar C ring, the mechanistic core of the motor. Our work provides insight into how usually conserved core components may have diversified by gene duplication, enabling a division of labor of the ancestral protein between the two new proteins, acquisition of new roles in flagellar assembly and motility, and expansion of the function of the flagellum beyond motility, including spatial regulation of cell division and numerical control of flagellar biogenesis in C. jejuni Our results highlight that relatively small changes, such as gene duplications, can have substantial ramifications on the cellular roles of a molecular machine.

Organization of the Flagellar Switch Complex of Bacillus subtilis

While the protein complex responsible for controlling the direction (clockwise [CW] or counterclockwise [CCW]) of flagellar rotation has been fairly well studied in Escherichia coli and Salmonella, less is known about the switch complex in Bacillus subtilis or other Gram-positive species. Two component proteins (FliG and FliM) are shared between E. coli and B. subtilis, but in place of the protein FliN found in E. coli, the B. subtilis complex contains the larger protein FliY. Notably, in B. subtilis the signaling protein CheY-phosphate induces a switch from CW to CCW rotation, opposite to its action in E. coli Here, we have examined the architecture and function of the switch complex in B. subtilis using targeted cross-linking, bacterial two-hybrid protein interaction experiments, and characterization of mutant phenotypes. In major respects, the B. subtilis switch complex appears to be organized similarly to that in E. coli The complex is organized around a ring built from the large middle domain of FliM; this ring supports an array of FliG subunits organized in a similar way to that of E. coli, with the FliG C-terminal domain functioning in the generation of torque via conserved charged residues. Key differences from E. coli involve the middle domain of FliY, which forms an additional, more outboard array, and the C-terminal domains of FliM and FliY, which are organized into both FliY homodimers and FliM heterodimers. Together, the results suggest that the CW and CCW conformational states are similar in the Gram-negative and Gram-positive switches but that CheY-phosphate drives oppositely directed movements in the two cases.IMPORTANCE Flagellar motility plays key roles in the survival of many bacteria and in the harmful action of many pathogens. Bacterial flagella rotate; the direction of flagellar rotation is controlled by a multisubunit protein complex termed the switch complex. This complex has been extensively studied in Gram-negative model species, but little is known about the complex in Bacillus subtilis or other Gram-positive species. Notably, the switch complex in Gram-positive species responds to its effector CheY-phosphate (CheY-P) by switching to CCW rotation, whereas in E. coli or Salmonella CheY-P acts in the opposite way, promoting CW rotation. In the work here, the architecture of the B. subtilis switch complex has been probed using cross-linking, protein interaction measurements, and mutational approaches. The results cast light on the organization of the complex and provide a framework for understanding the mechanism of flagellar direction control in B. subtilis and other Gram-positive species.

CW and CCW Conformations of the E. coli Flagellar Motor C-Ring Evaluated by Fluorescence Anisotropy

The molecular cascade that controls switching of the direction of rotation of Escherichia coli flagellar motors is well known, but the conformational changes that allow the rotor to switch are still unclear. The signaling molecule CheY, when phosphorylated, binds to the C-ring at the base of the rotor, raising the probability that the motor spins clockwise. When the concentration of CheY-P is so low that the motor rotates exclusively counterclockwise (CCW), the C-ring recruits more monomers of FliM and tetramers of FliN, the proteins to which CheY-P binds, thus increasing the motor's sensitivity to CheY-P and allowing it to switch once again. Motors that rotate exclusively CCW have more FliM and FliN subunits in their C-rings than motors that rotate exclusively clockwise. How are the new subunits accommodated? Does the diameter of the C-ring increase, or do FliM and FliN get packed in a different pattern, keeping the overall diameter of the C-ring constant? Here, by measuring fluorescence anisotropy of yellow fluorescent protein-labeled motors, we show that the CCW C-rings accommodate more FliM monomers without changing the spacing between them, and more FliN monomers at the same time as increasing their effective spacing and/or changing their orientation within the tetrameric structure.

Cryo-electron tomography of periplasmic flagella in Borrelia burgdorferi reveals a distinct cytoplasmic ATPase complex

Periplasmic flagella are essential for the distinct morphology and motility of spirochetes. A flagella-specific type III secretion system (fT3SS) composed of a membrane-bound export apparatus and a cytosolic ATPase complex is responsible for the assembly of the periplasmic flagella. Here, we deployed cryo-electron tomography (cryo-ET) to visualize the fT3SS machine in the Lyme disease spirochete Borrelia burgdorferi. We show, for the first time, that the cytosolic ATPase complex is attached to the flagellar C-ring through multiple spokes to form the “spoke and hub” structure in B. burgdorferi. This structure not only strengthens structural rigidity of the round-shaped C-ring but also appears to rotate with the C-ring. Our studies provide structural insights into the unique mechanisms underlying assembly and rotation of the periplasmic flagella and may provide the basis for the development of novel therapeutic strategies against several pathogenic spirochetes.

Cryo-electron tomography of periplasmic flagella in the Lyme disease bacterium Borrelia burgdorferi reveals it to have a distinct cytoplasmic ATPase complex and an atypical interaction with the flagellar C-ring.

Type III secretion systems are widely utilized by gram-negative bacteria to assemble flagella or to transport virulence effectors into eukaryotic cells. The central component is known as a type III secretion machine, which consists of a membrane-bound export apparatus and a cytosolic ATPase complex. Powered by the proton motive force and ATP hydrolysis, the secretion machine is responsible for substrate recognition and export. Here, we use the Lyme disease spirochete B. burgdorferi as a model system to unveil unprecedented structural details of the intact flagellar secretion machine by high-throughput cryo-electron tomography (cryo-ET) and subtomogram averaging. We provide the first structural evidence that the cytosolic ATPase complex is attached to the flagellar C-ring through multiple spokes to form the “spoke and hub” structure in B. burgdorferi. The novel architecture of the ATPase complex not only strengthens the flagellar C-ring but also enables an optimal translocation of substrates through the ATPase complex and the export apparatus.

Three SpoA-domain proteins interact in the creation of the flagellar type III secretion system in Helicobacter pylori

Bacterial flagella are rotary nanomachines that contribute to bacterial fitness in many settings, including host colonization. The flagellar motor relies on the multiprotein flagellar motor-switch complex to govern flagellum formation and rotational direction. Different bacteria exhibit great diversity in their flagellar motors. One such variation is exemplified by the motor-switch apparatus of the gastric pathogen Helicobacter pylori, which carries an extra switch protein, FliY, along with the more typical FliG, FliM, and FliN proteins. All switch proteins are needed for normal flagellation and motility in H. pylori, but the molecular mechanism of their assembly is unknown. To fill this gap, we examined the interactions among these proteins. We found that the C-terminal SpoA domain of FliY (FliY_C) is critical to flagellation and forms heterodimeric complexes with the FliN and FliM SpoA domains, which are β-sheet domains of type III secretion system proteins. Surprisingly, unlike in other flagellar switch systems, neither FliY nor FliN self-associated. The crystal structure of the FliY_C-FliN_C complex revealed a saddle-shaped structure homologous to the FliN-FliN dimer of Thermotoga maritima, consistent with a FliY-FliN heterodimer forming the functional unit. Analysis of the FliY_C-FliN_C interface indicated that oppositely charged residues specific to each protein drive heterodimer formation. Moreover, both FliY_C-FliM_C and FliY_C-FliN_C associated with the flagellar regulatory protein FliH, explaining their important roles in flagellation. We conclude that H. pylori uses a FliY-FliN heterodimer instead of a homodimer and creates a switch complex with SpoA domains derived from three distinct proteins.

ZomB is essential for flagellar motor reversals in Shewanella putrefaciens and Vibrio parahaemolyticus

The ability of most bacterial flagellar motors to reverse the direction of rotation is crucial for efficient chemotaxis. In Escherichia coli, motor reversals are mediated by binding of phosphorylated chemotaxis protein CheY to components of the flagellar rotor, FliM and FliN, which induces a conformational switch of the flagellar C-ring. Here, we show that for Shewanella putrefaciens, Vibrio parahaemolyticus and likely a number of other species an additional transmembrane protein, ZomB, is critically required for motor reversals as mutants lacking ZomB exclusively exhibit straightforward swimming also upon full phosphorylation or overproduction of CheY. ZomB is recruited to the cell poles by and is destabilized in the absence of the polar landmark protein HubP. ZomB also co-localizes to and may thus interact with the flagellar motor. The ΔzomB phenotype was suppressed by mutations in the very C-terminal region of FliM. We propose that the flagellar motors of Shewanella, Vibrio and numerous other species harboring orthologs to ZomB are locked in counterclockwise rotation and may require interaction with ZomB to enable the conformational switch required for motor reversals. Regulation of ZomB activity or abundance may provide these species with an additional means to modulate chemotaxis efficiency.

Architecture of the Flagellar Switch Complex of Escherichia coli: Conformational Plasticity of FliG and Implications for Adaptive Remodeling

Structural models of the complex that regulates the direction of flagellar rotation assume either ~34 or ~25 copies of the protein FliG. Support for ~34 came from crosslinking experiments identifying an intersubunit contact most consistent with that number; support for ~25 came from the observation that flagella can assemble and rotate when FliG is genetically fused to FliF, for which the accepted number is ~25. Here, we have undertaken crosslinking and other experiments to address more fully the question of FliG number. The results indicate a copy number of ~25 for FliG. An interaction between the C-terminal and middle domains, which has been taken to support a model with ~34 copies, is also supported. To reconcile the interaction with a FliG number of ~25, we hypothesize conformational plasticity in an interdomain segment of FliG that allows some subunits to bridge gaps created by the number mismatch. This proposal is supported by mutant phenotypes and other results indicating that the normally helical segment adopts a more extended conformation in some subunits. The FliG amino-terminal domain is organized in a regular array with dimensions matching a ring in the upper part of the complex. The model predicts that FliG copy number should be tied to that of FliF, whereas FliM copy number can increase or decrease according to the number of FliG subunits that adopt the extended conformation. This has implications for the phenomenon of adaptive switch remodeling, in which the FliM copy number varies to adjust the bias of the switch.

The Structure and Function of Type III Secretion Systems

Type III secretion systems (T3SSs) afford Gram-negative bacteria an intimate means of altering the biology of their eukaryotic hosts--the direct delivery of effector proteins from the bacterial cytoplasm to that of the eukaryote. This incredible biophysical feat is accomplished by nanosyringe "injectisomes," which form a conduit across the three plasma membranes, peptidoglycan layer, and extracellular space that form a barrier to the direct delivery of proteins from bacterium to host. The focus of this chapter is T3SS function at the structural level; we will summarize the core findings that have shaped our understanding of the structure and function of these systems and highlight recent developments in the field. In turn, we describe the T3SS secretory apparatus, consider its engagement with secretion substrates, and discuss the posttranslational regulation of secretory function. Lastly, we close with a discussion of the future prospects for the interrogation of structure-function relationships in the T3SS.

Single molecule super-resolution imaging of proteins in living Salmonella enterica using self-labelling enzymes

The investigation of the subcellular localization, dynamics and interaction of proteins and protein complexes in prokaryotes is complicated by the small size of the cells. Super-resolution microscopy (SRM) comprise various new techniques that allow light microscopy with a resolution that can be up to ten-fold higher than conventional light microscopy. Application of SRM techniques to living prokaryotes demands the introduction of suitable fluorescent probes, usually by fusion of proteins of interest to fluorescent proteins with properties compatible to SRM. Here we describe an approach that is based on the genetically encoded self-labelling enzymes HaloTag and SNAP-tag. Proteins of interest are fused to HaloTag or SNAP-tag and cell permeable substrates can be labelled with various SRM-compatible fluorochromes. Fusions of the enzyme tags to subunits of a type I secretion system (T1SS), a T3SS, the flagellar rotor and a transcription factor were generated and analysed in living Salmonella enterica. The new approach is versatile in tagging proteins of interest in bacterial cells and allows to determine the number, relative subcellular localization and dynamics of protein complexes in living cells.

Characterisation of Shigella Spa33 and Thermotoga FliM/N reveals a new model for C-ring assembly in T3SS

Flagellar type III secretion systems (T3SS) contain an essential cytoplasmic‐ring (C‐ring) largely composed of two proteins FliM and FliN, whereas an analogous substructure for the closely related non‐flagellar (NF) T3SS has not been observed in situ. We show that the spa33 gene encoding the putative NF‐T3SS C‐ring component in Shigella flexneri is alternatively translated to produce both full‐length (Spa33‐FL) and a short variant (Spa33‐C), with both required for secretion. They associate in a 1:2 complex (Spa33‐FL/C₂) that further oligomerises into elongated arrays in vitro. The structure of Spa33‐C₂ and identification of an unexpected intramolecular pseudodimer in Spa33‐FL reveal a molecular model for their higher order assembly within NF‐T3SS. Spa33‐FL and Spa33‐C are identified as functional counterparts of a FliM–FliN fusion and free FliN respectively. Furthermore, we show that Thermotoga maritima  FliM and FliN form a 1:3 complex structurally equivalent to Spa33‐FL/C₂, allowing us to propose a unified model for C‐ring assembly by NF‐T3SS and flagellar‐T3SS.

Visualization of the type III secretion sorting platform of Shigella flexneri

Bacterial type III secretion machines are widely used to inject virulence proteins into eukaryotic host cells. These secretion machines are evolutionarily related to bacterial flagella and consist of a large cytoplasmic complex, a transmembrane basal body, and an extracellular needle. The cytoplasmic complex forms a sorting platform essential for effector selection and needle assembly, but it remains largely uncharacterized. Here we use high-throughput cryoelectron tomography (cryo-ET) to visualize intact machines in a virulent Shigella flexneri strain genetically modified to produce minicells capable of interaction with host cells. A high-resolution in situ structure of the intact machine determined by subtomogram averaging reveals the cytoplasmic sorting platform, which consists of a central hub and six spokes, with a pod-like structure at the terminus of each spoke. Molecular modeling of wild-type and mutant machines allowed us to propose a model of the sorting platform in which the hub consists mainly of a hexamer of the Spa47 ATPase, whereas the MxiN protein comprises the spokes and the Spa33 protein forms the pods. Multiple contacts among those components are essential to align the Spa47 ATPase with the central channel of the MxiA protein export gate to form a unique nanomachine. The molecular architecture of the Shigella type III secretion machine and its sorting platform provide the structural foundation for further dissecting the mechanisms underlying type III secretion and pathogenesis and also highlight the major structural distinctions from bacterial flagella.

Assembly states of FliM and FliG within the flagellar switch complex

At the base of the bacterial flagella, a cytoplasmic rotor (the C-ring) generates torque and reverses rotation sense in response to stimuli. The bulk of the C-ring forms from many copies of the proteins FliG, FliM, and FliN, which together constitute the switch complex. To help resolve outstanding issues regarding C-ring architecture, we have investigated interactions between FliM and FliG from Thermotoga maritima with X-ray crystallography and pulsed dipolar ESR spectroscopy (PDS). A new crystal structure of an 11-unit FliG:FliM complex produces a large arc with a curvature consistent with the dimensions of the C-ring. Previously determined structures along with this new structure provided a basis to test switch complex assembly models. PDS combined with mutational studies and targeted cross-linking reveal that FliM and FliG interact through their middle domains to form both parallel and antiparallel arrangements in solution. Residue substitutions at predicted interfaces disrupt higher-order complexes that are primarily mediated by contacts between the C-terminal domain of FliG and the middle domain of a neighboring FliG molecule. Spin separations among multi-labeled components fit a self-consistent model that agree well with electron microscopy images of the C-ring. An activated form of the response regulator CheY destabilizes the parallel arrangement of FliM molecules to perturb FliG alignment in a process that may reflect the onset of rotation switching. These data suggest a model of C-ring assembly in which intermolecular contacts among FliG domains provide a template for FliM assembly and cooperative transitions.

Molecular architecture of the bacterial flagellar motor in cells

The flagellum is one of the most sophisticated self-assembling molecular machines in bacteria. Powered by the proton-motive force, the flagellum rapidly rotates in either a clockwise or counterclockwise direction, which ultimately controls bacterial motility and behavior. Escherichia coli and Salmonella enterica have served as important model systems for extensive genetic, biochemical, and structural analysis of the flagellum, providing unparalleled insights into its structure, function, and gene regulation. Despite these advances, our understanding of flagellar assembly and rotational mechanisms remains incomplete, in part because of the limited structural information available regarding the intact rotor–stator complex and secretion apparatus. Cryo-electron tomography (cryo-ET) has become a valuable imaging technique capable of visualizing the intact flagellar motor in cells at molecular resolution. Because the resolution that can be achieved by cryo-ET with large bacteria (such as E. coli and S. enterica) is limited, analysis of small-diameter bacteria (including Borrelia burgdorferi and Campylobacter jejuni) can provide additional insights into the in situ structure of the flagellar motor and other cellular components. This review is focused on the application of cryo-ET, in combination with genetic and biophysical approaches, to the study of flagellar structures and its potential for improving the understanding of rotor–stator interactions, the rotational switching mechanism, and the secretion and assembly of flagellar components.

Stoichiometry and turnover of the bacterial flagellar switch protein FliN

Some proteins in biological complexes exchange with pools of free proteins while the complex is functioning. Evidence is emerging that protein exchange can be part of an adaptive mechanism. The bacterial flagellar motor is one of the most complex biological machines and is an ideal model system to study protein dynamics in large multimeric complexes. Recent studies showed that the copy number of FliM in the switch complex and the fraction of FliM that exchanges vary with the direction of flagellar rotation. Here, we investigated the stoichiometry and turnover of another switch complex component, FliN, labeled with the fluorescent protein CyPet, in Escherichia coli. Our results confirm that, in vivo, FliM and FliN form a complex with stoichiometry of 1:4 and function as a unit. We estimated that wild-type motors contained 120 ± 26 FliN molecules. Motors that rotated only clockwise (CW) or counterclockwise (CCW) contained 114 ± 17 and 144 ± 26 FliN molecules, respectively. The ratio of CCW-to-CW FliN copy numbers was 1.26, very close to that of 1.29 reported previously for FliM. We also measured the exchange of FliN molecules, which had a time scale and dependence upon rotation direction similar to those of FliM, consistent with an exchange of FliM-FliN as a unit. Our work confirms the highly dynamic nature of multimeric protein complexes and indicates that, under physiological conditions, these machines might not be the stable, complete structures suggested by averaged fixed methodologies but, rather, incomplete rings that can respond and adapt to changing environments.

The flagellum is one of the most complex structures in a bacterial cell, with the core motor proteins conserved across species. Evidence is now emerging that turnover of some of these motor proteins depends on motor activity, suggesting that turnover is important for function. The switch complex transmits the chemosensory signal to the rotor, and we show, by using single-cell measurement, that both the copy number and the fraction of exchanging molecules vary with the rotational bias of the rotor. When the motor is locked in counterclockwise rotation, the copy number is similar to that determined by averaged, fixed methodologies, but when locked in a clockwise direction, the number is much lower, suggesting that that the switch complex ring is incomplete. Our results suggest that motor remodeling is an important component in tuning responses and adaptation at the motor.

Gene expression profiling of Escherichia coli in response to interactions with the lettuce rhizosphere

AIMS

The objective of this study was to examine transcriptional changes in Escherichia coli when the bacterium was growing in the lettuce rhizoshpere.

METHODS AND RESULTS

A combination of microarray analyses, colonization assays and confocal microscopy was used to gain a more complete understanding of bacterial genes involved in the colonization and growth of E. coli K12 in the lettuce root rhizosphere using a novel hydroponic assay system. After 3 days of interaction with lettuce roots, E. coli genes involved in protein synthesis, stress responses and attachment were up-regulated. Mutants in curli production (crl, csgA) and flagella synthesis (fliN) had a reduced capacity to attach to roots as determined by bacterial counts and by confocal laser scanning microscopy.

CONCLUSIONS

This study indicates that E. coli K12 has the capability to colonize lettuce roots by using attachment genes and can readily adapt to the rhizosphere of lettuce plants.

SIGNIFICANCE AND IMPACT OF THE STUDY

Results of this study show curli production and biofilm modulation genes are important for rhizosphere colonization and may provide useful targets to disrupt this process. Further studies using pathogenic strains will provide additional information about lettuce-E. coli interactions.

Two translation products of Yersinia yscQ assemble to form a complex essential to type III secretion

The bacterial flagellar C-ring is composed of two essential proteins, FliM and FliN. The smaller protein, FliN, is similar to the C-terminus of the larger protein, FliM, both being composed of SpoA domains. While bacterial type III secretion (T3S) systems encode many proteins in common with the flagellum, they mostly have a single protein in place of FliM and FliN. This protein resembles FliM at its N-terminus and is as large as FliM but is more like FliN at its C-terminal SpoA domain. We have discovered that a FliN-sized cognate indeed exists in the Yersinia T3S system to accompany the FliM-sized cognate. The FliN-sized cognate, YscQ-C, is the product of an internal translation initiation site within the locus encoding the FliM-sized cognate YscQ. Both intact YscQ and YscQ-C were found to be required for T3S, indicating that the internal translation initiation site, which is conserved in some but not all YscQ orthologs, is crucial for function. The crystal structure of YscQ-C revealed a SpoA domain that forms a highly intertwined, domain-swapped homodimer, similar to those observed in FliN and the YscQ ortholog HrcQ(B). A single YscQ-C homodimer associated reversibly with a single molecule of intact YscQ, indicating conformational differences between the SpoA domains of intact YscQ and YscQ-C. A "snap-back" mechanism suggested by the structure can account for this. The 1:2 YscQ-YscQ-C complex is a close mimic of the 1:4 FliM-FliN complex and the likely building block of the putative Yersinia T3S system C-ring.

A molecular mechanism of direction switching in the flagellar motor of Escherichia coli

The direction of flagellar rotation is regulated by a rotor-mounted protein assembly, termed the "switch complex," formed from multiple copies of the proteins FliG, FliM, and FliN. The structures of major parts of these proteins are known, and the overall organization of proteins in the complex has been elucidated previously using a combination of protein-binding, mutational, and cross-linking approaches. In Escherichia coli, the switch from counterclockwise to clockwise rotation is triggered by the signaling protein phospho-CheY, which binds to the lower part of the switch complex and induces small movements of FliM and FliN subunits relative to each other. Direction switching also must produce movements in the upper part of the complex, particularly in the C-terminal domain of FliG (FliG(C)), which interacts with the stator to generate the torque for flagellar rotation. In the present study, protein movements in the middle and upper parts of the switch complex have been probed by means of targeted cross-linking and mutational analysis. Switching induces a tilting movement of the FliM domains that form the middle part of the switch and a consequent rotation of the affixed FliG(C) domains that reorients the stator interaction sites by about 90°. In a recently proposed hypothesis for the motor mechanism, such a reorientation of FliG(C) would reverse the direction of motor rotation.

Adjusting the spokes of the flagellar motor with the DNA-binding protein H-NS

The H-NS protein of bacteria is a global regulator that stimulates transcription of flagellar genes and that also acts directly to modulate flagellar motor function. H-NS is known to bind FliG, a protein of the rotor that interacts with the stator and is directly involved in rotation of the motor. Here, we find that H-NS, well known for its ability to organize DNA, acts in the flagellar motor to organize protein subunits in the rotor. It binds to a middle domain of FliG that bridges the core parts of the rotor and parts nearer the edge that interact with the stator. In the absence of H-NS the organization of FliG subunits is disrupted, whereas overexpression of H-NS enhances FliG organization as monitored by targeted disulfide cross-linking, alters the disposition of a helix joining the middle and C-terminal domains of FliG, and enhances motor performance under conditions requiring a strengthened rotor-stator interface. The H-NS homolog StpA was also shown to bind FliG and to act similarly, though less effectively, in organizing FliG. The motility-enhancing effects of H-NS contrast with those of the recently characterized motility inhibitor YcgR. The present findings provide an integrated, structurally grounded framework for understanding the roughly opposing effects of these motility regulators.

Quantitative proteomic analysis reveals formation of an EscL-EscQ-EscN type III complex in enteropathogenic Escherichia coli

We characterized Orf5 and SepQ, two type III secretion (T3S) system proteins in enteropathogenic Escherichia coli, and showed that they are essential for T3S, associated with the bacterial membrane, and interact with EscN. Our findings suggest that Orf5 and SepQ are homologs of YscL and YscQ from Yersinia, respectively.

Architecture of the flagellar rotor

Rotation and switching of the bacterial flagellum depends on a large rotor-mounted protein assembly composed of the proteins FliG, FliM and FliN, with FliG most directly involved in rotation. The crystal structure of a complex between the central domains of FliG and FliM, in conjunction with several biochemical and molecular-genetic experiments, reveals the arrangement of the FliG and FliM proteins in the rotor. A stoichiometric mismatch between FliG (26 subunits) and FliM (34 subunits) is explained in terms of two distinct positions for FliM: one where it binds the FliG central domain and another where it binds the FliG C-terminal domain. This architecture provides a structural framework for addressing the mechanisms of motor rotation and direction switching and for unifying the large body of data on motor performance. Recently proposed alternative models of rotor assembly, based on a subunit contact observed in crystals, are not supported by experiment.

Bacterial nanomachines: the flagellum and type III injectisome

The bacterial flagellum and the virulence-associated injectisome are complex, structurally related nanomachines that bacteria use for locomotion or the translocation of virulence factors into eukaryotic host cells. The assembly of both structures and the transfer of extracellular proteins is mediated by a unique, multicomponent transport apparatus, the type III secretion system. Here, we discuss the significant progress that has been made in recent years in the visualization and functional characterization of many components of the type III secretion system, the structure of the bacterial flagellum, and the injectisome complex.

Chemotaxis signaling protein CheY binds to the rotor protein FliN to control the direction of flagellar rotation in Escherichia coli

The direction of rotation of the Escherichia coli flagellum is controlled by an assembly called the switch complex formed from multiple subunits of the proteins FliG, FliM, and FliN. Structurally, the switch complex corresponds to a drum-shaped feature at the bottom of the basal body, termed the C-ring. Stimulus-regulated reversals in flagellar motor rotation are the basis for directed movement such as chemotaxis. In E. coli, the motors turn counterclockwise (CCW) in their default state, allowing the several filaments on a cell to join together in a bundle and propel the cell smoothly forward. In response to the chemotaxis signaling molecule phospho-CheY (CheY(P)), the motors can switch to clockwise (CW) rotation, causing dissociation of the filament bundle and reorientation of the cell. CheY(P) has previously been shown to bind to a conserved segment near the N terminus of FliM. Here, we show that this interaction serves to capture CheY(P) and that the switch to CW rotation involves the subsequent interaction of CheY(P) with FliN. FliN is located at the bottom of the C-ring, in close association with the C-terminal domain of FliM (FliM(C)), and the switch to CW rotation has been shown to involve relative movement of FliN and FliM(C). Using a recently developed structural model for the FliN/FliM(C) array, and the CheY(P)-binding site here identified on FliN, we propose a mechanism by which CheY(P) binding could induce the conformational switch to CW rotation.

Isolation of basal bodies with C-ring components from the Na+-driven flagellar motor of Vibrio alginolyticus

To investigate the Na(+)-driven flagellar motor of Vibrio alginolyticus, we attempted to isolate its C-ring structure. FliG but not FliM copurified with the basal bodies. FliM proteins may be easily dissociated from the basal body. We could detect FliG on the MS ring surface of the basal bodies.

Subunit organization and reversal-associated movements in the flagellar switch of Escherichia coli

Bacterial flagella contain a rotor-mounted protein complex termed the switch complex that functions in flagellar assembly, rotation, and clockwise/counterclockwise direction control. In Escherichia coli and Salmonella, the switch complex contains the proteins FliG, FliM, and FliN and corresponds structurally with the C-ring in the flagellar basal body. Certain features of subunit organization in the switch complex have been deduced previously, but details of subunit organization in the lower part of the C-ring and the molecular movements responsible for motor switching remain unclear. In this study, we use cross-linking, binding, and mutational experiments to examine subunit organization in the bottom of the C-ring and to probe movements that occur upon switching. The results show that FliN tetramers alternate with FliM C-terminal domains to form the bottom of the C-ring in an arrangement that closely reproduces the major features observed in electron microscopic reconstructions. When motors were switched to clockwise rotation by a repellent stimulus, cross-link yields were altered in a pattern indicating relative movement of FliN and FliM(C). These results are discussed in the framework of a structurally grounded hypothesis for the switching mechanism.

The Modular Organization of Protein Interactions in Escherichia coli

Escherichia coli serves as an excellent model for the study of fundamental cellular processes such as metabolism, signalling and gene expression. Understanding the function and organization of proteins within these processes is an important step towards a 'systems' view of E. coli. Integrating experimental and computational interaction data, we present a reliable network of 3,989 functional interactions between 1,941 E. coli proteins ( approximately 45% of its proteome). These were combined with a recently generated set of 3,888 high-quality physical interactions between 918 proteins and clustered to reveal 316 discrete modules. In addition to known protein complexes (e.g., RNA and DNA polymerases), we identified modules that represent biochemical pathways (e.g., nitrate regulation and cell wall biosynthesis) as well as batteries of functionally and evolutionarily related processes. To aid the interpretation of modular relationships, several case examples are presented, including both well characterized and novel biochemical systems. Together these data provide a global view of the modular organization of the E. coli proteome and yield unique insights into structural and evolutionary relationships in bacterial networks.

Functional analysis of the Helicobacter pylori flagellar switch proteins

Helicobacter pylori uses flagellum-mediated chemotaxis to promote infection. Bacterial flagella change rotational direction by changing the state of the flagellar motor via a subcomplex referred to as the switch. Intriguingly, the H. pylori genome encodes four switch complex proteins, FliM, FliN, FliY, and FliG, instead of the more typical three of Escherichia coli or Bacillus subtilis. Our goal was to examine whether and how all four switch proteins participate in flagellation. Previous work determined that FliG was required for flagellation, and we extend those findings to show that all four switch proteins are necessary for normal numbers of flagellated cells. Furthermore, while fliY and fliN are partially redundant with each other, both are needed for wild-type levels of flagellation. We also report the isolation of an H. pylori strain containing an R54C substitution in fliM, resulting in bacteria that swim constantly and do not change direction. Along with data demonstrating that CheY-phosphate interacts with FliM, these findings suggest that FliM functions in H. pylori much as it does in other organisms.

A molecular mechanism of bacterial flagellar motor switching

The high-resolution structures of nearly all the proteins that comprise the bacterial flagellar motor switch complex have been solved; yet a clear picture of the switching mechanism has not emerged. Here, we used NMR to characterize the interaction modes and solution properties of a number of these proteins, including several soluble fragments of the flagellar motor proteins FliM and FliG, and the response-regulator CheY. We find that activated CheY, the switch signal, binds to a previously unidentified region of FliM, adjacent to the FliM-FliM interface. We also find that activated CheY and FliG bind with mutual exclusivity to this site on FliM, because their respective binding surfaces partially overlap. These data support a model of CheY-driven motor switching wherein the binding of activated CheY to FliM displaces the carboxy-terminal domain of FliG (FliGC) from FliM, modulating the FliGC-MotA interaction, and causing the motor to switch rotational sense as required for chemotaxis.

The diverse CheC-type phosphatases: chemotaxis and beyond

A new class of protein phosphatases has emerged in the study of bacterial/archaeal chemotaxis, the CheC-type phosphatases. These proteins are distinct and unrelated to the well-known CheY-P phosphatase CheZ, though they have convergently evolved to dephosphorylate the same target. The family contains a common consensus sequence D/S-X(3)-E-X(2)-N-X(22)-P that defines the phosphatase active site, of which there are often two per protein. Three distinct subgroups make up the family: CheC, FliY and CheX. Further, the CheC subgroup can be divided into three classes. Bacillus subtilis CheC typifies the first class and might function as a regulator of CheD. Class II CheCs likely function as phosphatases in systems other than chemotaxis. Class III CheCs are found in the archaeal class Halobacteria and might function as class I CheCs. FliY is the main phosphatase in the B. subtilis chemotaxis system. CheX is quite divergent from the rest of the family, forms a dimer and some may function outside chemotaxis. A model for the evolution of the family is discussed.

Molecular motors of the bacterial flagella

The bacterial flagellum, which is responsible for motility, is a biological nanomachine consisting of a reversible rotary motor, a universal joint, a helical screw, and a protein export apparatus dedicated for flagellar assembly. The motor is fueled by an inward-directed electrochemical gradient of protons or sodium ions across the cytoplasmic membrane. The motor consists of a rotor, a drive shaft, a bushing, and about a dozen stator units. The flagellar protein export apparatus is located at the cytoplasmic side of the rotor. Interactions between the rotor and the stators and those between soluble and membrane components of the export apparatus are highly dynamic. The structures of flagellar basal body components including those of the export apparatus, being revealed at high resolution by X-ray crystallography and electron cryomicroscopy and cryotomography, are giving insights into their mechanisms.

Bacterial flagellar motor

The bacterial flagellar motor is a reversible rotary nano-machine, about 45 nm in diameter, embedded in the bacterial cell envelope. It is powered by the flux of H+or Na+ions across the cytoplasmic membrane driven by an electrochemical gradient, the proton-motive force or the sodium-motive force. Each motor rotates a helical filament at several hundreds of revolutions per second (hertz). In many species, the motor switches direction stochastically, with the switching rates controlled by a network of sensory and signalling proteins. The bacterial flagellar motor was confirmed as a rotary motor in the early 1970s, the first direct observation of the function of a single molecular motor. However, because of the large size and complexity of the motor, much remains to be discovered, in particular, the structural details of the torque-generating mechanism. This review outlines what has been learned about the structure and function of the motor using a combination of genetics, single-molecule and biophysical techniques, with a focus on recent results and single-molecule techniques.

Characterization of the periplasmic domain of MotB and implications for its role in the stator assembly of the bacterial flagellar motor

MotA and MotB are integral membrane proteins that form the stator complex of the proton-driven bacterial flagellar motor. The stator complex functions as a proton channel and couples proton flow with torque generation. The stator must be anchored to an appropriate place on the motor, and this is believed to occur through a putative peptidoglycan-binding (PGB) motif within the C-terminal periplasmic domain of MotB. In this study, we constructed and characterized an N-terminally truncated variant of Salmonella enterica serovar Typhimurium MotB consisting of residues 78 through 309 (MotB(C)). MotB(C) significantly inhibited the motility of wild-type cells when exported into the periplasm. Some point mutations in the PGB motif enhanced the motility inhibition, while an in-frame deletion variant, MotB(C)(Delta197-210), showed a significantly reduced inhibitory effect. Wild-type MotB(C) and its point mutant variants formed a stable homodimer, while the deletion variant was monomeric. A small amount of MotB was coisolated only with the secreted form of MotB(C)-His(6) by Ni-nitrilotriacetic acid affinity chromatography, suggesting that the motility inhibition results from MotB-MotB(C) heterodimer formation in the periplasm. However, the monomeric mutant variant MotB(C)(Delta197-210) did not bind to MotB, suggesting that MotB(C) is directly involved in stator assembly. We propose that the MotB(C) dimer domain plays an important role in targeting and stable anchoring of the MotA/MotB complex to putative stator-binding sites of the motor.

Flagellar motility in bacteria structure and function of flagellar motor

Bacterial flagella are filamentous organelles that drive cell locomotion. They thrust cells in liquids (swimming) or on surfaces (swarming) so that cells can move toward favorable environments. At the base of each flagellum, a reversible rotary motor, which is powered by the proton- or the sodium-motive force, is embedded in the cell envelope. The motor consists of two parts: the rotating part, or rotor, that is connected to the hook and the filament, and the nonrotating part, or stator, that conducts coupling ion and is responsible for energy conversion. Intensive genetic and biochemical studies of the flagellum have been conducted in Salmonella typhimurium and Escherichia coli, and more than 50 gene products are known to be involved in flagellar assembly and function. The energy-coupling mechanism, however, is still not known. In this chapter, we survey our current knowledge of the flagellar system, based mostly on studies from Salmonella, E. coli, and marine species Vibrio alginolyticus, supplemented with distinct aspects of other bacterial species revealed by recent studies.

The three-dimensional structure of the flagellar rotor from a clockwise-locked mutant of Salmonella enterica serovar Typhimurium

Three-dimensional reconstructions from electron cryomicrographs of the rotor of the flagellar motor reveal that the symmetry of individual M rings varies from 24-fold to 26-fold while that of the C rings, containing the two motor/switch proteins FliM and FliN, varies from 32-fold to 36-fold, with no apparent correlation between the symmetries of the two rings. Results from other studies provided evidence that, in addition to the transmembrane protein FliF, at least some part of the third motor/switch protein, FliG, contributes to a thickening on the face of the M ring, but there was no evidence as to whether or not any portion of FliG also contributes to the C ring. Of the four morphological features in the cross section of the C ring, the feature closest to the M ring is not present with the rotational symmetry of the rest of the C ring, but instead it has the symmetry of the M ring. We suggest that this inner feature arises from a domain of FliG. We present a hypothetical docking in which the C-terminal motor domain of FliG lies in the C ring, where it can interact intimately with FliM.

Mutational analysis of the flagellar protein FliG: sites of interaction with FliM and implications for organization of the switch complex

The switch complex at the base of the bacterial flagellum is essential for flagellar assembly, rotation, and switching. In Escherichia coli and Salmonella, the complex contains about 26 copies of FliG, 34 copies of FliM, and more then 100 copies of FliN, together forming the basal body C ring. FliG is involved most directly in motor rotation and is located in the upper (membrane-proximal) part of the C ring. A crystal structure of the middle and C-terminal parts of FliG shows two globular domains connected by an alpha-helix and a short extended segment. The middle domain of FliG has a conserved surface patch formed by the residues EHPQ(125-128) and R(160) (the EHPQR motif), and the C-terminal domain has a conserved surface hydrophobic patch. To examine the functional importance of these and other surface features of FliG, we made mutations in residues distributed over the protein surface and measured the effects on flagellar assembly and function. Mutations preventing flagellar assembly occurred mainly in the vicinity of the EHPQR motif and the hydrophobic patch. Mutations causing aberrant clockwise or counterclockwise motor bias occurred in these same regions and in the waist between the upper and lower parts of the C-terminal domain. Pull-down assays with glutathione S-transferase-FliM showed that FliG interacts with FliM through both the EHPQR motif and the hydrophobic patch. We propose a model for the organization of FliG and FliM subunits that accounts for the FliG-FliM interactions identified here and for the different copy numbers of FliG and FliM in the flagellum.

Mutational analysis of the flagellar rotor protein FliN: identification of surfaces important for flagellar assembly and switching

FliN is a component of the flagellar switch complex in many bacterial species. The crystal structure is known for most of FliN, and a targeted cross-linking study (K. Paul and D. F. Blair, J. Bacteriol. 188:2502-2511, 2006) showed that it is organized in ring-shaped tetramers at the bottom of the basal body C ring. FliN is essential for flagellar assembly and direction switching, but its precise functions have not been defined. Here, we identify functionally important regions on FliN by systematic mutagenesis. Nonconservative mutations were made at positions sampling the surface of the protein, and the effects on flagellar assembly and function were measured. Flagellar assembly was disrupted by mutations in a conserved hydrophobic patch centered on the dimer twofold axis or by mutations on the surface that forms the dimer-dimer interface in the tetramer. The assembly defect in hydrophobic-patch mutants was partially rescued by overexpression of the flagellar export proteins FliH and FliI, and coprecipitation assays demonstrated a binding interaction between FliN and FliH that was weakened by mutations in the hydrophobic patch. Thus, FliN might contribute to export by providing binding sites for FliH or FliH-containing complexes. The region around the hydrophobic patch is also important for switching; certain mutations in or near the patch caused a smooth-swimming chemotaxis defect that in most cases could be partially rescued by overexpression of the clockwise-signaling protein CheY. The results indicate that FliN is more closely involved in switching than has been supposed, possibly contributing to the binding site for CheY on the switch.

Structure of FliM provides insight into assembly of the switch complex in the bacterial flagella motor

Bacteria switch the direction their flagella rotate to control movement. FliM, along with FliN and FliG, compose a complex in the motor that, upon binding phosphorylated CheY, reverses the sense of flagellar rotation. The 2.0-A resolution structure of the FliM middle domain (FliM(M)) from Thermotoga maritima reveals a pseudo-2-fold symmetric topology similar to the CheY phosphatases CheC and CheX. A variable structural element, which, in CheC, mediates binding to CheD (alpha2') and, in CheX, mediates dimerization (beta'(x)), has a truncated structure unique to FliM (alpha2'). An exposed helix of FliM(M) (alpha1) does not contain the catalytic residues of CheC and CheX but does include positions conserved in FliM sequences. Cross-linking experiments with site-directed cysteine mutants show that FliM self-associates through residues on alpha1 and alpha2'. CheY activated by BeF(3)(-) binds to FliM with approximately 40-fold higher affinity than CheY (K(d) = 0.04 microM vs. 2 microM). Mapping residue conservation, suppressor mutation sites, binding data, and deletion analysis onto the FliM(M) surface defines regions important for contacts with the stator-interacting protein FliG and for either counterclockwise or clockwise rotation. Association of 33-35 FliM subunits would generate a 44- to 45-nm-diameter disk, consistent with the known dimensions of the C-ring. The localization of counterclockwise- and clockwise-biasing mutations to distinct surfaces suggests that the binding of phosphorylated CheY cooperatively realigns FliM around the ring.