Direct detection of Mycobacterium tuberculosis complex in clinical samples from patients in Norway by ligase chain reaction

Advances in ligase chain reaction and ligation-based amplifications for genotyping assays: Detection and applications

Genetic variants have been reported to cause several genetic diseases. Various genotyping assays have been developed for diagnostic and screening purposes but with certain limitations in sensitivity, specificity, cost effectiveness and/or time savings. Since the discovery of ligase chain reaction (LCR) in the late nineties, it became one of the most favored platforms for detecting these variants and also for genotyping low abundant contaminants. Recent and powerful modifications with the integration of various detection strategies such as electrochemical and magnetic biosensors, nanoparticles (NPs), quantum dots, quartz crystal and leaky surface acoustic surface biosensors, DNAzyme, rolling circle amplification (RCA), strand displacement amplification (SDA), surface enhanced raman scattering (SERS), chemiluminescence and fluorescence resonance energy transfer have been introduced to both LCR and ligation based amplifications to enable high-throughput and inexpensive multiplex genotyping with improved robustness, simplicity, sensitivity and specificity. In this article, classical and up to date modifications in LCR and ligation based amplifications are critically evaluated and compared with emphasis on points of strength and weakness, sensitivity, cost, running time, equipment needed, applications and multiplexing potential. Versatile genotyping applications such as genetic diseases detection, bacterial and viral pathogens detection are also detailed. Ligation based gold NPs biosensor, ligation based RCA and ligation mediated SDA assays enhanced detection limit tremendously with a discrimination power approaching 1.5aM, 2aM and 0.1fM respectively. MLPA (multiplexed ligation dependent probe amplification) and SNPlex assays have been commercialized for multiplex detection of at least 48 SNPs at a time. MOL-PCR (multiplex oligonucleotide ligation) has high-throughput capability with multiplex detection of 50 SNPs/well in a 96 well plate. Ligase detection reaction (LDR) is one of the most widely used LCR versions that have been successfully integrated with several detection strategies with improved sensitivity down to 0.4fM.

Evaluation of reverse transcription loop-mediated isothermal amplification in conjunction with ELISA-hybridization assay for molecular detection of Mycobacterium tuberculosis

Traditional culture, followed by a panel of biochemical tests for the diagnosis of tuberculosis (TB), is time-consuming, and rapid identification of Mycobacterium tuberculosis is crucial for the early administration of appropriate therapy. In this study, the reverse transcription loop-mediated isothermal amplification combined with enzyme-linked immunosorbent hybridization (RT-LAMP-ELISA-hybridization) assay has been designed for the rapid detection of 16S rRNA in clinical isolates of M. tuberculosis. This assay reproducibly detected a single copy, as opposed to 2000 copies of MTB 16S rRNA detected by conventional gel electrophoresis. Among the 150 specimens of sputum analysed, RT-LAMP-ELISA-hybridization assay had a sensitivity of 94.1% in the culture method, compared to the Amplified M. tuberculosis Direct Test (AMTD), 91.1% and the 88.2% sensitivity of acid-fast staining. Furthermore, RT-LAMP-ELISA-hybridization assay is more cost-effective when compared to the real-time TaqMan RT-PCR and AMTD assays. In conclusion, our results suggest that the RT-LAMP-ELISA-hybridization assay is a highly sensitive, low cost diagnostic tool useful for the rapid and accurate direct diagnosis of sputum specimens, and is suitable for routine clinical use.

A paradigm for the molecular identification of Mycobacterium species in a routine diagnostic laboratory

The aim of this study was to improve the identification ofMycobacteriumspecies in the context of a UK teaching hospital. Real-time PCR assays were established to enable the rapid differentiation betweenMycobacterium tuberculosis(MTB) complex andMycobacteriumspecies other thantuberculosis(MOTT), followed by 16S rRNA gene sequencing for the speciation of MOTT. Real-time PCR assays gave comparable results to those from the reference laboratory. The implementation of these PCR assays using an improved bead extraction method has enhanced the mycobacterial diagnostic service at the Royal Free Hospital by providing a rapid means of differentiating between MTB complex and MOTT, and would be simple to implement in similar laboratories. Sequence analysis successfully identified a range ofMycobacteriumspp. representative of those encountered in the clinical setting of the authors, includingMycobacterium aviumcomplex,Mycobacterium fortuitumgroup,Mycobacterium chelonae–Mycobacterium abscessusgroup,Mycobacterium xenopiandMycobacterium gordonae. It provides a useful tool for the identification of MOTT when clinically indicated.

Prospective evaluation of BDProbeTec strand displacement amplification (SDA) system for diagnosis of tuberculosis in non-respiratory and respiratory samples

Nucleic acid amplification techniques (NAATs) have been demonstrated to make significant improvements in the diagnosis of tuberculosis (TB), particularly in the time to diagnosis and the diagnosis of smear-negative TB. The BD ProbeTec strand displacement amplification (SDA) system for the diagnosis of pulmonary and non-pulmonary tuberculosis was evaluated. A total of 689 samples were analysed from patients with clinically suspected TB. Compared with culture, the sensitivity and specificity for pulmonary samples were 98 and 89 %, and against final clinical diagnosis 93 and 92 %, respectively. This assay has undergone limited evaluation for non-respiratory samples and so 331 non-respiratory samples were tested, identifying those specimens that were likely to yield a useful result. These were CSF (n = 104), fine needle aspirates (n = 64) and pus (n = 41). Pleural fluid (n = 47) was identified as a poor specimen. A concern in using the SDA assay was that low-positive samples were difficult to interpret; 7.8 % of specimens fell into this category. Indeed, 64 % of the discrepant results, when compared to final clinical diagnosis, could be assigned as low-positive samples. Specimen type did not predict likelihood of a sample being in the low-positive zone. Although the manufacturers do not describe the concept of a low-positive zone, we have found that it aids clinical diagnosis.

Evaluation of the BDProbeTec ET system as screening tool in the direct detection of mycobacterium tuberculosis complex in respiratory specimens

We evaluated the BDProbeTec ET System (Becton Dickinson) for the routine detection of Mycobacterium tuberculosis complex (MTC) in respiratory specimens and pleural fluids, comparing with microscopy (Ziehl Neelsen stain, ZN) and culture in liquid (BACTEC MGIT 960, MGIT) and solid (Löwenstein Jensen, LJ) media. Five hundred and two specimens, collected from 266 patients, of which 257 with suspected tuberculosis and 9 receiving anti-tuberculosis treatment, were investigated. Thirty-nine specimens were positive by any method, including false positives. Mycobacteria were isolated from 33 specimens (32 Mycobacterium tuberculosis and 1 Mycobacterium chelonae). Thirty-six specimens were BDProbeTec ET positive, 33 specimens were MGIT positive, 27 were LJ positive and 22 were ZN positive. With BDProbeTec ET, 2 specimens were false negative (culture positive), and 2 specimens from non-treated patients were false positive (culture negative). The overall sensitivity, specificity, and positive and negative predictive values for BDProbeTec ET compared to culture were 93.7, 98.7, 83.3, and 99.5%, respectively, while with smear-positive and smear-negative specimens the sensitivities were 100% and 81.5% respectively. In five treated patients the disappearance of MTC could be monitored using BDProbeTec ET in parallel with culture. The overall inhibition rate was 0.2%. BDProbeTec ET can be very useful for rapid detection of MTC, especially in smear-negative respiratory specimens.

Loop-mediated isothermal amplification for direct detection of Mycobacterium tuberculosis complex, M. avium, and M. intracellulare in sputum samples

Loop-mediated isothermal amplification (LAMP) is a novel nucleic acid amplification method in which reagents react under isothermal conditions with high specificity, efficiency, and rapidity. We used LAMP for detection of Mycobacterium tuberculosis complex, Mycobacterium avium, and Mycobacterium intracellulare directly from sputum specimens as well as for detection of culture isolates grown in a liquid medium (MGIT; Nippon Becton Dickinson Co., Ltd., Tokyo, Japan) or on a solid medium (Ogawa's medium). Species-specific primers were designed by targeting the gyrB gene, and their specificities were validated on 24 mycobacterial species and 7 nonmycobacterial species. The whole procedure is quite simple, starting with the mixing of all reagents in a single tube, followed by an isothermal reaction during which the reaction mixture is held at 63 degrees C. The resulting amplicons are visualized by adding SYBR Green I to the reaction tube. The only equipment needed for the amplification reaction is a regular laboratory water bath or heat block that furnishes a constant temperature of 63 degrees C. The assay had a detection limit of 5 to 50 copies of purified DNA with a 60-min incubation time. The reaction time could be shortened to 35 min for the species identification of M. tuberculosis complex, M. avium, and M. intracellulare from a solid-medium culture. Residual DNA lysates prepared for the Amplicor assay (Roche Diagnostics GmbH) from 66 sputum specimens were tested in the LAMP assay. Although the sample size used for the latter assay was small, 2.75 micro l of the DNA lysates, it showed a performance comparable with that of the Amplicor assay, which required 50 micro l of the lysates. This LAMP-based assay is simple, rapid, and sensitive; a result is available in 35 min for a solid-medium culture and in 60 min for a liquid-medium culture or for a sputum specimen that contains a corresponding amount of DNA available for testing.

Evaluation of the BDProbeTec ET DTB assay(1) for direct detection of Mycobacterium tuberculosis complex from clinical samples

The purpose of this study was to evaluate the ability of BDProbeTec ET DTB system to detect Mycobacterium tuberculosis complex directly from clinical specimens. A total of 628 specimens (553 respiratory and 75 non respiratory specimens) were collected from 478 patients. These samples were tested with the BDProbeTec ET DTB assay and results were compared with acid fast microscopy and culture. Sixty eight out of 77 culture positive M. tuberculosis complex samples were detected with overall sensitivity and specificity of 89.5% and 98.2% respectively. Overall sensitivity was 100% in smear positive samples and 79% in smear negative samples. After resolution of discrepant results, sensitivity and specificity for respiratory samples were 91.6% and 98.7% respectively. BDProbeTec ET DTB assay demonstrated to be a rapid, sensitive and specific method for detection of M. tuberculosis complex.

Rapid-cycle PCR and fluorimetry for detection of mycobacteria

In this study we used LightCycler PCR amplification and product detection by fluorescence resonance energy transfer probes to identify mycobacteria and differentiate between Mycobacterium tuberculosis complex, Mycobacterium avium, and other nontuberculous mycobacteria. Targeting the 16S rRNA gene, three different probes specific for mycobacteria, M. tuberculosis complex, and M. avium were constructed. As few as five genome copies of target nucleic acid were detected by the probes, illustrating the high sensitivity of the system. All 33 mycobacterial species tested but none of the closely related actinomycetes and other bacteria produced a specific fluorescence signal. A specificity of 100% was also demonstrated for the M. tuberculosis complex-specific probe and the M. avium-specific probe. Within 45 min, the LightCycler method correctly detected mycobacteria and specifically identified M. tuberculosis complex and M. avium without any post-PCR sample manipulation. In view of future clinical studies, we also constructed and tested an internal control which could be used to assure successful amplification and detection of mycobacteria. Monitoring of PCR inhibition will be essential for evaluation of this system for direct detection of mycobacteria in clinical specimens. Finally, we tested our system on sputum seeded with mycobacteria and were able to detect as few as 10 organisms. At present, this system is the fastest available method for identification and differentiation of mycobacteria from culture-positive specimens and offers an excellent alternative to previously established nucleic acid amplification-based techniques for the diagnostic mycobacterial laboratory.

Failure of commercial ligase chain reaction to detect Mycobacterium tuberculosis DNA in sputum samples from a patient with smear-positive pulmonary tuberculosis due to a deletion of the target region

We report on a strain of Mycobacterium tuberculosis with a deletion in the protein antigen B gene overlapping the probe binding sites for the Abbott Diagnostics LCx M. tuberculosis (LCx-MTB) probe assay. A false-negative result with the LCx-MTB assay delayed a laboratory diagnosis of tuberculosis.

Molecular biology techniques in parasite ecology

Molecular techniques are increasingly being used to study the ecology of a variety of organisms. These techniques represent important tools for the study of the systematics, population genetics, biogeography and ecology of parasites. Here, we review the techniques that have been employed to study the ecology and systematics of parasites (including bacteria and viruses). Particular emphasis is placed on the techniques of isoenzyme electrophoresis, in situ hybridisation and nucleic acid amplification to characterise parasite/microbial communities. The application of these techniques will be exemplified using ticks, bacterial endosymbionts and parasitic protozoa.

Identification of four distinct genotypes of Candida dubliniensis and detection of microevolution in vitro and in vivo

The present study investigates further the population structure of Candida dubliniensis and its ability to exhibit microevolution. Using 98 isolates (including 80 oral isolates) from 94 patients in 15 countries, we confirmed the existence of two distinct populations within the species C. dubliniensis, designated Cd25 group I and Cd25 group II, respectively, on the basis of DNA fingerprints generated with the C. dubliniensis-specific probe Cd25. The majority of Cd25 group I isolates (48 of 71, 67.6%) were from human immunodeficiency virus (HIV)-infected individuals, whereas the majority of Cd25 group II isolates (19 of 27, 70.4%) were from HIV-negative individuals (P < or = 0.001). Nucleotide sequence analysis of the internal transcribed spacer (ITS) regions of the rRNA genes from 19 representative isolates revealed the presence of four separate genotypes. All of the Cd25 group I isolates tested belonged to genotype 1, while the Cd25 group II population was comprised of three distinct genotypes (genotypes 2 to 4), which corresponded to distinct clades within the Cd25 group II population. These findings were confirmed using genotype-specific PCR primers with 70 isolates. We also showed that C. dubliniensis can exhibit microevolution in vivo and in vitro as occurs in other yeast species. DNA fingerprinting using the C. dubliniensis probes Cd25, Cd24, and Cd1 and karyotype analysis of multiple oral isolates recovered from the same specimen from each of eight separate patients revealed microevolution in six of eight of the clonal populations. Similarly, sequential clonal isolates from various anatomical sites in two separate patients exhibited microevolution. Microevolution was also shown to occur when two clinical isolates susceptible to fluconazole were exposed to the drug in vitro. The epidemiological significance of the four C. dubliniensis genotypes and the ability of C. dubliniensis to undergo microevolution has yet to be established.

LCx Mycobacterium tuberculosis assay is valuable with respiratory specimens, but provides little help in the diagnosis of extrapulmonary tuberculosis

BACKGROUND

Commercial nucleic acid amplification tests, designed for the detection of Mycobacterium tuberculosis DNA/RNA in respiratory samples, are often applied also in nonrespiratory specimens in order to verify the diagnosis of extrapulmonary tuberculosis. AIM. To evaluate the value of the Abbott LCx Mycobacterium tuberculosis assay for the diagnosis of pulmonary and extrapulmonary tuberculosis based on routine clinical laboratory results.

METHODS

The assay was used to analyse 350 respiratory and 826 nonrespiratory specimens from 961 patients, of whom 3.6% had culture-proven tuberculosis. The results obtained by the LCx assay were compared with the records on mycobacterial isolates of the national reference laboratory and, in the case of positive findings, with clinical data.

RESULTS

In comparison with culture, the sensitivity, specificity and positive/negative predictive value of the assay on respiratory specimens were 87.5%, 99.7%, 93.3% and 99.4%, respectively. With nonrespiratory specimens, the overall sensitivity, specificity and positive/negative predictive value of the LCx assay were 73.3%, 98.0%, 40.7% and 99.5%, respectively. When clinical and histological data were also included, the positive predictive value of LCx with nonrespiratory specimens was 45.8%.

CONCLUSION

Critical interpretation of the nucleic acid amplification results obtained from nonrespiratory specimens is necessary in both laboratory and clinical settings.

Sudden death caused by myocardial tuberculosis: case report and review of the literature

A 25-year-old fit man died suddenly while playing social soccer. Autopsy revealed an infiltrative lesion involving the left ventricle with overlying pericarditis. No other significant pathologic changes were observed. Histologic examination showed necrotizing granulomatous inflammation. No acid-fast bacilli were demonstrated in the pericardial fluid or on histologic examination. The presence of Mycobacterium tuberculosis DNA complex was confirmed by use of the ligase chain reaction technique. The differential diagnosis of myocardial tuberculosis includes sarcoidosis, rheumatic fever, rheumatoid arthritis, giant-cell-containing tumors, idiopathic (giant-cell) myocarditis, and bacterial infections such as tularemia and brucellosis. This case illustrates the protean manifestations of tuberculosis and highlights the use of molecular biologic techniques in arriving at a definitive diagnosis in cases of suspected tuberculosis.

Ligase chain reaction assay is clinically useful in the discrimination of smear-positive pulmonary tuberculosis from atypical mycobacterioses

We evaluated the usefulness of the ligase chain reaction (LCR) (Abbott LCx Mycobacterium tuberculosis assay) during the initial diagnosis of tuberculosis. LCx was carried out in parallel with conventional methods for the analysis of clinical samples. Out of 86 patients who were examined clinically, 53 were suspected of having pulmonary tuberculosis, eight had residual X-ray scars from previous tuberculosis and 25 served as asymptomatic controls. Ten bronchoscopy samples and 237 sputum samples were analysed by direct microscopy, culture and LCx. All 11 smear-positive and two of three smear-negative tuberculosis patients had at least one LCx-positive specimen. All samples that were both LCx- and smear-positive were culture-positive for M. tuberculosis. The smear-positive samples from the five patients with atypical mycobacteriosis were LCx-negative. There were three false-positive results: one in a smear-negative sample from a patient with M. malmoense infection and two from two pneumonia patients. All samples from controls and patients with previous tuberculosis were LCx-negative. The sensitivity, specificity and the positive and negative predictive values of LCx in patient analysis were 92.9%, 95.8%, 81.3% and 98.6%, respectively. LCx assay of M. tuberculosis is useful in rapid confirmation of tuberculosis or atypical mycobacteriosis from a smear-positive sample and may aid in diagnosing smear-negative tuberculosis.

Multicenter evaluation of the Abbott LCx Mycobacterium tuberculosis ligase chain reaction assay

Four Australian hospital laboratories evaluated the performance of the Abbott LCx Mycobacterium tuberculosis assay with 2,347 specimens (2,083 respiratory and 264 nonrespiratory specimens) obtained from 1, 411 patients. A total of 152 specimens (6.5%) were culture positive for Mycobacterium tuberculosis complex (MTBC); of these, 79 (52%) were smear positive. After resolution of discrepant data, the overall sensitivity, specificity, and positive and negative predictive values for the LCx assay were 69.7, 99.9, 99.1, and 97.7% respectively. For smear-positive respiratory specimens that were culture positive for MTBC, the values were 98.5, 100, 100, and 98.4%, respectively, while the values for smear-negative respiratory specimens were 41.5, 99.9, 96.4, and 98%, respectively. Relative operating characteristic curves were constructed to demonstrate the relationship between sensitivity and specificity for a range of possible cutoff values in the LCx assay. These graphs suggested that the assay sensitivity for respiratory samples could be increased from 70.2 to 78.6%, while the specificity would be reduced from 99.9 to 99.4% by inclusion of a grey zone (i.e., LCx assay values of between 0.2 and 0.99). An algorithm is presented for the handling of specimens with LCx assay values within this grey zone.

Evaluation of three commercial detection systems for Mycobacterium tuberculosis where clinical diagnosis is difficult

AIMS

To assess the performance of three commercially available Mycobacterium tuberculosis detection systems employing nucleic acid amplification, when applied directly to respiratory and non-respiratory specimens from patients where the diagnosis of tuberculosis is difficult using clinical and traditional bacteriological methods.

METHODS

42 respiratory and 21 non-respiratory specimens were concentrated, examined with auramine staining, and cultured on Lowenstein-Jensen slopes. These specimens were also assayed using the Amplicor Mycobacterium tuberculosis test (AM) (Roche Diagnostic Systems), the Amplified Mycobacterium tuberculosis direct test (AMD) (Gen-Probe), and the LCx Mycobacterium tuberculosis assay (LMA) (Abbott Laboratories).

RESULTS

All three amplification systems used in this study gave specificities of 100% when used on respiratory specimens. When used on non-respiratory specimens, AM and LMA gave specificities of 100% and AMD 75%. With respiratory specimens the AM, AMD, and LMA systems gave sensitivities of 75%, 65.2%, and 79.2%, respectively. With non-respiratory specimens the sensitivities were 50%, 66.7%, and 60%, while with smear negative, culture positive specimens they were 33.3%, 66.7%, and 55.6%. Positive predictive values of 100% were seen with all specimens except non-respiratory specimens assayed using AMD where the value was 66.7%.

CONCLUSIONS

The manufacturers of these systems recommend that they should only be used for the direct analysis of respiratory specimens, and the US Food and Drug Administration has approved them for use only with smear positive specimens. This study confirms that sensitivities are lower for non-respiratory and smear negative specimens, but positive predictive values are high. Provided they are interpreted with caution, positive results with these tests in respiratory and non-respiratory specimens are useful in tuberculous patients who are otherwise difficult to diagnose. Each amplification has advantages and disadvantages compared with the others.

Multicenter evaluation of two commercial amplification kits (Amplicor, Roche and LCx, Abbott) for direct detection of Mycobacterium tuberculosis in pulmonary and extrapulmonary specimens

Direct detection of Mycobacterium tuberculosis was performed in parallel with the Amplicor M. tuberculosis test (Roche Diagnostic System, USA) and the LCx M. tuberculosis (Abbott Diagnostic Division, USA) on 697 samples, collected from 481 patients, in three different Italian laboratories. Though both systems are licensed only for pulmonary specimens, 113 extrapulmonary specimens (represented mainly by pleural fluids, cerebrospinal fluids and urines) were included in the study. Amplification results were compared with acid-fast microscopy, culture, and identification of isolates. Final clinical diagnosis was used to resolve discrepant results. M. tuberculosis was detected in 105 specimens by both assays, whereas 561 were agreeing negatives; 21 and 6 of the remaining true-positive samples scored positive with LCx only and with Amplicor only, respectively. There were three false-positives with LCx and one false-positive with Amplicor. The diagnostic sensitivity of both methods was significantly better when only respiratory specimens were considered (78% versus 59% in nonrespiratory samples with Amplicor, and 88% versus 65% with LCx). Our data reveal a significantly better sensitivity of the LCx (p = 0.026) and a slight better specificity of the Amplicor assay. It is noteworthy that 16 of the 21 Amplicor-negative specimens in which LCx detected M. tuberculosis were culture negative, thus suggesting that the higher diagnostic sensitivity of the latter assay is attributable to its better analytical sensitivity. However, the majority of such samples originated from patients under antimicrobial treatment, which makes uncertain the clinical significance of such increased sensitivity. Considering true-positive for LCx and true-negative for Amplicor, the 16 culture-negative/LCx-positive/Amplicor-negative specimens resulted true-positives after the resolution of discrepancies, the final overall sensitivity and specificity values of the LCx assay were not significantly different from the ones of the Amplicor assay.

[Usefulness of a gene amplification technique (LCx MTB) in the diagnosis of tuberculosis: preliminary results with different sputum samples]

OBJECTIVE

To evaluate the use in non-sputum samples of a commercial molecular amplification kit (LCx MTB, Abbott Diagnostica) (LCx) for the diagnosis of tuberculosis.

MATERIAL AND METHOD

Ninety-nine non-sputum samples from the same number of patients (bronchoalveolar, pleural and ascitic fluid, fecal samples, blood cultures, biopsies from different sites, cerebrospinal fluid, urine and gastric juices) and 14 sputum samples (10 from patients clinically suspected of having tuberculosis and 4 from patients diagnosed of tuberculosis and undergoing appropriate treatment for at least one month). All samples were LCx processed according to the manufacturer's instructions. The reference diagnosis was obtained by the Löwestein-jensen method and when results were inconsistent, we took into account the degree of clinical suspicion, response to treatment and histology.

RESULTS

Seven of the 99 samples were positive by the LCx technique, and 6 of the 7 were also LJ positive; 1 could not be evaluated because of culture contamination. One LJ positive culture was LCx negative. Only one sample was positive by Ziehl-Neelsen (ZN) staining. Ninety-two samples were LCx negative, with 91 showing no growth at all. Sensitivity was 86% and specificity 98%. Atypical mycobacteria were detected in 4 cases, all of which were LCx negative.

CONCLUSIONS

Diagnosis of tuberculosis by applying the LCx system to various types of samples other than sputum is simple, rapid, sensitive and specific.

Performance characteristics of the BDProbeTec system for direct detection of Mycobacterium tuberculosis complex in respiratory specimens

Strand displacement amplification (SDA) technology has been established in a fully automated system known as BDProbeTec. Target sequences of the insertion sequence IS6110 and the 16S rRNA gene are simultaneously amplified, which thus allows the detection of Mycobacterium tuberculosis complex and, as an additional option, of most Mycobacterium species. Detection occurs via a chemiluminescent microwell assay that employs the simultaneous hybridization and capture of SDA products with a biotinylated capture probe and an alkaline phosphatase detector probe. We have evaluated the performance of the BDProbeTec system in detecting M. tuberculosis complex by testing 799 respiratory specimens and comparing the results to those obtained by conventional diagnostic techniques, i.e. , microscopy and culture (solid and radiometric media). M. tuberculosis was cultivated from 41 specimens, of which 28 (68.4%) were smear positive and 13 (31.6%) were smear negative. The overall sensitivity of the SDA assay was 97.6% (for smear-positive specimens, 100%; for smear-negative specimens, 92.3%), and specificity was 95. 0%. After resolution of the discrepancies by studying the patients' clinical data, sensitivity and specificity were 97.9 and 96.5%, respectively, and positive and negative predictive values were 63.9 and 99.9%, respectively. These preliminary data demonstrate that the BDProbeTec system has promising performance characteristics with respiratory specimens and that it allows the detection of M. tuberculosis complex within hours.

Evaluation of the Abbott LCx Mycobacterium tuberculosis assay for direct detection of Mycobacterium tuberculosis complex in human samples

Seven hundred thirty-seven clinical samples from 460 patients were processed for direct detection of Mycobacterium tuberculosis complex by a semiautomated ligase chain reaction commercial assay, the LCx Mycobacterium tuberculosis Assay (LCx assay) from Abbott Laboratories. Results were compared to those of direct microscopy and standard microbiological culture. Of 26 patients (5.7%) with a culture positive for M. tuberculosis, 22 (84.6%) were found positive by the LCx assay. The sensitivity of the LCx assay was 98% for smear-positive samples and 27% for smear-negative samples. With an overall culture positivity rate for M. tuberculosis of 8.3% (61 of 737 samples) and after resolution of discrepant results according to clinical data, the sensitivity, specificity, and positive and negative predictive values of the LCx assay were 78, 100, 95, and 98%, respectively, compared to 85, 100, 100, and 98%, respectively, for culture and 67, 99, 87, and 97%, respectively, for acid-fast staining. In conclusion, the LCx assay proved satisfactory and appears to be an easy-to-use 1-day test which must be used with standard culture methods but can considerably reduce diagnosis time versus culture. However, its clinical interest appears to be limited in our population with low mycobacterial prevalence because of its cost considering the small gain in sensitivity versus direct microscopy.

Comparative evaluation of the new gen-probe Mycobacterium tuberculosis amplified direct test and the semiautomated abbott LCx Mycobacterium tuberculosis assay for direct detection of Mycobacterium tuberculosis complex in respiratory and extrapulmonary specimens

Two commercial assays that detect Mycobacterium tuberculosis complex (MTB) in clinical specimens by rRNA target amplification (AMTDII) and ligase chain reaction (LCx) were evaluated. The tests were applied to 457 respiratory (n = 273) and extrapulmonary (n = 184) specimens collected from 357 patients. The results were compared with those of acid-fast staining and culture. The combination of culture and clinical diagnosis was considered to be the "gold standard." Seventy specimens were from patients with pulmonary tuberculosis and 28 specimens were from patients with extrapulmonary tuberculosis. After resolution of discrepant results, the overall sensitivities, specificities, and positive and negative predictive values for respiratory specimens were 92.8, 99.4, 98.5, and 97%, respectively, for AMTDII and 75.7, 98.8, 96.4, and 90.5%, respectively, for LCx. With extrapulmonary specimens, the overall sensitivities, specificities, and positive and negative predictive values were 78.6, 99.3, 95.6, and 96.2%, respectively, for AMTDII and 53.6, 99.3, 93.7, and 92.1%, respectively, for LCx. The level of agreement between AMTDII and LCx assay results was 78.2%. We conclude that although both nucleic acid amplification methods are rapid and specific for the detection of MTB in clinical specimens, AMTDII is significantly more sensitive than LCx with both respiratory (P = 0.005) and extrapulmonary (P = 0.048) specimens.

Rapid diagnosis of pulmonary tuberculosis with the LCx Mycobacterium tuberculosis assay and comparison with conventional diagnostic techniques

The LCx MTB amplification assay is a nucleic acid amplification test intended for the direct detection of Mycobacterium tuberculosis complex in respiratory specimens. We evaluated its performance on 2,001 consecutive respiratory specimens; 78 were culture positive for M. tuberculosis. Sensitivity, specificity, and positive and negative predictive values of this assay for all specimens compared to culture results were 88.5, 97.7, 60.5, and 99.5%, respectively. When referred to resolved clinical diagnosis of active tuberculosis, these values improved to 90.2, 98.4, 72.8, and 99.5%, respectively.

Differentiation of Mycobacterium ulcerans, M. marinum, and M. haemophilum: mapping of their relationships to M. tuberculosis by fatty acid profile analysis, DNA-DNA hybridization, and 16S rRNA gene sequence analysis

Although Mycobacterium ulcerans, M. marinum, and M. haemophilum are closely related, their exact taxonomic placements have not been determined. We performed gas chromatography of fatty acids and alcohols, as well as DNA-DNA hybridization and 16S rRNA gene sequence analysis, to clarify their relationships to each other and to M. tuberculosis. M. ulcerans and M. marinum were most closely related to one another, and each displayed very strong genetic affinities to M. tuberculosis; they are actually the two mycobacterial species outside the M. tuberculosis complex most closely related to M. tuberculosis. M. haemophilum was more distinct from M. ulcerans and M. marinum, and it appeared to be as related to these two species as to M. tuberculosis. These results are important with regard to the development of diagnostic and epidemiological tools such as species-specific DNA probes and PCR assays for M. ulcerans, M. marinum, and M. haemophilum. In addition, the finding that M. ulcerans and M. marinum are more closely related to M. tuberculosis than are other pathogenic mycobacterial species suggests that they may be evaluated as useful models for studying the pathogenesis of M. tuberculosis. M. marinum may be particularly useful in this regard since strains of this species grow much more rapidly than M. tuberculosis and yet can cause systemic disease in immunocompromised hosts.