Residues of the rotavirus RNA-dependent RNA polymerase template entry tunnel that mediate RNA recognition and genome replication

New Insights into the Effect of Residue Mutations on the Rotavirus VP1 Function Using Molecular Dynamic Simulations

Rotavirus group A remains a major cause of diarrhea in infants and young children worldwide. The permanent emergence of new genotypes puts the potential effectiveness of vaccines under serious questions. Thirteen VP1 structures with mutations mapping to the RNA entry site were analyzed using molecular dynamics simulations, and the results were combined with the experimental findings reported previously. The results revealed structural fluctuations in the protein-protein recognition sites and in the bottleneck of the RNA entry site that may affect the interaction of different proteins and delay the initiation of the viral replication, respectively. Altogether, the structural analysis of VP1 in the region crucial for the initiation of the viral replication, mainly the bottleneck site, may boost efforts to develop antivirals, as they might complement the available vaccines.

In Vitro Double-Stranded RNA Synthesis by Rotavirus Polymerase Mutants with Lesions at Core Shell Contact Sites

The rotavirus polymerase VP1 mediates all stages of viral RNA synthesis within the confines of subviral particles and while associated with the core shell protein VP2. Transcription (positive-strand RNA [+RNA] synthesis) by VP1 occurs within double-layered particles (DLPs), while genome replication (double-stranded RNA [dsRNA] synthesis) by VP1 occurs within assembly intermediates. VP2 is critical for VP1 enzymatic activity; yet, the mechanism by which the core shell protein triggers polymerase function remains poorly understood. Structural analyses of transcriptionally competent DLPs show that VP1 is located beneath the VP2 core shell and sits slightly off-center from each of the icosahedral 5-fold axes. In this position, the polymerase is contacted by the core shell at 5 distinct surface-exposed sites, comprising VP1 residues 264 to 267, 547 to 550, 614 to 620, 968 to 980, and 1022 to 1025. Here, we sought to test the functional significance of these VP2 contact sites on VP1 with regard to polymerase activity. We engineered 19 recombinant VP1 (rVP1) proteins that contained single- or multipoint alanine mutations within each individual contact site and assayed them for the capacity to synthesize dsRNA in vitro in the presence of rVP2. Three rVP1 mutants (E265A/L267A, R614A, and D971A/S978A/I980A) exhibited diminished in vitro dsRNA synthesis. Despite their loss-of-function phenotypes, the mutants did not show major structural changes in silico, and they maintained their overall capacity to bind rVP2 in vitro via their nonmutated contact sites. These results move us toward a mechanistic understanding of rotavirus replication and identify precise VP2-binding sites on the polymerase surface that are critical for its enzymatic activation.IMPORTANCE Rotaviruses are important pathogens that cause severe gastroenteritis in the young of many animals. The viral polymerase VP1 mediates all stages of viral RNA synthesis, and it requires the core shell protein VP2 for its enzymatic activity. Yet, there are several gaps in knowledge about how VP2 engages and activates VP1. Here, we probed the functional significance of 5 distinct VP2 contact sites on VP1 that were revealed through previous structural studies. Specifically, we engineered alanine amino acid substitutions within each of the 5 VP1 regions and assayed the mutant polymerases for the capacity to synthesize RNA in the presence of VP2 in a test tube. Our results identified residues within 3 of the VP2 contact sites that are critical for robust polymerase activity. These results are important because they enhance the understanding of a key step of the rotavirus replication cycle.

Group A Rotavirus VP1 Polymerase and VP2 Core Shell Proteins: Intergenotypic Sequence Variation and In Vitro Functional Compatibility

Group A rotaviruses (RVAs) are classified according to a nucleotide sequence-based system that assigns a genotype to each of the 11 double-stranded RNA (dsRNA) genome segments. For the segment encoding the VP1 polymerase, 22 genotypes (R1 to R22) are defined with an 83% nucleotide identity cutoff value. For the segment encoding the VP2 core shell protein, which is a functional VP1-binding partner, 20 genotypes (C1 to C20) are defined with an 84% nucleotide identity cutoff value. However, the extent to which the VP1 and VP2 proteins encoded by these genotypes differ in their sequences or interactions has not been described. Here, we sought to (i) delineate the relationships and sites of variation for VP1 and VP2 proteins belonging to the known RVA genotypes and (ii) correlate intergenotypic sequence diversity with functional VP1-VP2 interaction(s) during dsRNA synthesis. Using bioinformatic approaches, we revealed which VP1 and VP2 genotypes encode divergent proteins and identified the positional locations of amino acid changes in the context of known structural domains/subdomains. We then employed an in vitro dsRNA synthesis assay to test whether genotype R1, R2, R4, and R7 VP1 polymerases could be enzymatically activated by genotype C1, C2, C4, C5, and C7 VP2 core shell proteins. Genotype combinations that were incompatible informed the rational design and in vitro testing of chimeric mutant VP1 and VP2 proteins. The results of this study connect VP1 and VP2 nucleotide-level diversity to protein-level diversity for the first time, and they provide new insights into regions/residues critical for VP1-VP2 interaction(s) during viral genome replication.IMPORTANCE Group A rotaviruses (RVAs) are widespread in nature, infecting numerous mammalian and avian hosts and causing severe gastroenteritis in human children. RVAs are classified using a system that assigns a genotype to each viral gene according to its nucleotide sequence. To date, 22 genotypes have been described for the gene encoding the viral polymerase (VP1), and 20 genotypes have been described for the gene encoding the core shell protein (VP2). Here, we analyzed if/how the VP1 and VP2 proteins encoded by the known RVA genotypes differ from each other in their sequences. We also used a biochemical approach to test whether the intergenotypic sequence differences influenced how VP1 and VP2 functionally engage each other to mediate RNA synthesis in a test tube. This work is important because it increases our understanding of RVA protein-level diversity and raises new ideas about the VP1-VP2 binding interface(s) that is important for viral replication.

Genome packaging in multi-segmented dsRNA viruses: distinct mechanisms with similar outcomes

Segmented double-stranded (ds)RNA viruses share remarkable similarities in their replication strategy and capsid structure. During virus replication, positive-sense single-stranded (+)RNAs are packaged into procapsids, where they serve as templates for dsRNA synthesis, forming progeny particles containing a complete equimolar set of genome segments. How the +RNAs are recognized and stoichiometrically packaged remains uncertain. Whereas bacteriophages of the Cystoviridae family rely on specific RNA-protein interactions to select appropriate +RNAs for packaging, viruses of the Reoviridae instead rely on specific inter-molecular interactions between +RNAs that guide multi-segmented genome assembly. While these families use distinct mechanisms to direct +RNA packaging, both yield progeny particles with a complete set of genomic dsRNAs.

Epidemiology of Rotavirus A in Nigeria: Molecular Diversity and Current Insights

Rotavirus induced acute gastroenteritis AGE has been a major disease burden in Nigeria, since it was first reported in 1985. Prevalence rates have increased with severe public health consequences particularly among children. The vaccine Rotarix® has been introduced and is commercially available in Nigeria. However routine rotavirus vaccination is yet to be introduced into the National Immunization Program. Molecular epidemiology of rotavirus in Nigeria has shown the presence of various genotypes, with genotype G12P[8] being the most recent introduction. There are however gaps in molecular data on rotavirus in Nigeria. We therefore reviewed molecular data on rotavirus isolated in Nigeria and also analyzed VP4 and VP7 genes of Nigerian rotavirus strains in Genbank. We have shown that there is a distinct trend in rotavirus molecular epidemiology in Nigeria, with new genotype introductions occurring after the year 2010. We also observed from our analysis the emergence of genotype G12 Lineage III as a dominant genotype. This information elucidates rotavirus molecular epidemiology in Nigeria and gives insight to the expanding landscape of rotavirus genotypes. We recommend the institution of molecular surveillance country wide, before considering the inclusion of rotavirus vaccination into the National Immunization Program in Nigeria, in other to monitor evolution of divergent or recombinant strains.

A Temperature-Sensitive Lesion in the N-Terminal Domain of the Rotavirus Polymerase Affects Its Intracellular Localization and Enzymatic Activity

Temperature-sensitive (ts) mutants of simian rotavirus (RV) strain SA11 have been previously created to investigate the functions of viral proteins during replication. One mutant, SA11-tsC, has a mutation that maps to the gene encoding the VP1 polymerase and shows diminished growth and RNA synthesis at 39°C compared to that at 31°C. In the present study, we sequenced all 11 genes of SA11-tsC, confirming the presence of an L138P mutation in the VP1 N-terminal domain and identifying 52 additional mutations in four other viral proteins (VP4, VP7, NSP1, and NSP2). To investigate whether the L138P mutation induces a ts phenotype in VP1 outside the SA11-tsC genetic context, we employed ectopic expression systems. Specifically, we tested whether the L138P mutation affects the ability of VP1 to localize to viroplasms, which are the sites of RV RNA synthesis, by expressing the mutant form as a green fluorescent protein (GFP) fusion protein (VP1_L138P-GFP) (i) in wild-type SA11-infected cells or (ii) in uninfected cells along with viroplasm-forming proteins NSP2 and NSP5. We found that VP1_L138P-GFP localized to viroplasms and interacted with NSP2 and/or NSP5 at 31°C but not at 39°C. Next, we tested the enzymatic activity of a recombinant mutant polymerase (rVP1_L138P) in vitro and found that it synthesized less RNA at 39°C than at 31°C, as well as less RNA than the control at all temperatures. Together, these results provide a mechanistic basis for the ts phenotype of SA11-tsC and raise important questions about the role of leucine 138 in supporting key protein interactions and the catalytic function of the VP1 polymerase.IMPORTANCE RVs cause diarrhea in the young of many animal species, including humans. Despite their medical and economic importance, gaps in knowledge exist about how these viruses replicate inside host cells. Previously, a mutant simian RV (SA11-tsC) that replicates worse at higher temperatures was identified. This virus has an amino acid mutation in VP1, which is the enzyme responsible for copying the viral RNA genome. The mutation is located in a poorly understood region of the polymerase called the N-terminal domain. In this study, we determined that the mutation reduces the ability of VP1 to properly localize within infected cells at high temperatures, as well as reduced the ability of the enzyme to copy viral RNA in a test tube. The results of this study explain the temperature sensitivity of SA11-tsC and shed new light on functional protein-protein interaction sites of VP1.

Functional insights from molecular modeling, docking, and dynamics study of a cypoviral RNA dependent RNA polymerase

Antheraea mylitta cytoplasmic polyhedrosis virus (AmCPV) contains 11 double stranded RNA genome segments and infects tasar silkworm A. mylitta. RNA-dependent RNA polymerase (RdRp) is reported as a key enzyme responsible for propagation of the virus in the host cell but its structure function relationship still remains elusive. Here a computational approach has been taken to compare sequence and secondary structure of AmCPV RdRp with other viral RdRps to identify consensus motifs. Then a reliable pairwise sequence alignment of AmCPV RdRp with its closest sequence structure homologue λ3 RdRp is done to predict three dimensional structure of AmCPV RdRp. After comparing with other structurally known viral RdRps, important sequence and/or structural features involved in substrate entry or binding, polymerase reaction and the product release events have been identified. A conserved RNA pentanucleotide (5'-AGAGC-3') at the 3'-end of virus genome is predicted as cis-acting signal for RNA synthesis and its docking and simulation study along with the model of AmCPV RdRp has allowed to predict mode of template binding by the viral polymerase. It is found that template RNA enters into the catalytic center through nine sequence-independent and two sequence-dependent interactions with the specific amino acid residues. However, number of sequence dependent interactions remains almost same during 10 nano-second simulation time while total number of interactions decreases. Further, docking of N(7)-methyl-GpppG (mRNA cap) on the model as well as prediction of RNA secondary structure has shown the template entry process in the active site. These findings have led to postulate the mechanism of RNA-dependent RNA polymerization process by AmCPV RdRp. To our knowledge, this is the first report to evaluate structure function relationship of a cypoviral RdRp.

Regulation of rotavirus polymerase activity by inner capsid proteins

Rotavirus, a cause of pediatric gastroenteritis, has a genome consisting of 11 segments of double-stranded (ds)RNA surrounded by a triple-layered protein capsid. The rotavirus RNA-dependent RNA polymerase, VP1, synthesizes both dsRNA and plus-strand RNA (+RNA) within subviral particles. Structural analyses of the rotavirus capsid and polymerase, combined with functional studies of purified capsid proteins, indicate that the inner capsid protein controls the initiation of RNA synthesis by VP1. Whether VP1 directs dsRNA versus +RNA synthesis may be regulated by the impact of the viral RNA capping enzyme on the position of the polymerase plug, a flexible element that inserts into one of the polymerase's RNA exit tunnels. This review discusses recent findings and ideas into the mechanisms used by rotavirus capsid proteins to control the activities of its viral polymerase and to coordinate RNA synthesis with the assembly of virus particles.

RNA synthetic mechanisms employed by diverse families of RNA viruses

RNA viruses are ubiquitous in nature, infecting every known organism on the planet. These viruses can also be notorious human pathogens with significant medical and economic burdens. Central to the lifecycle of an RNA virus is the synthesis of new RNA molecules, a process that is mediated by specialized virally encoded enzymes called RNA‐dependent RNA polymerases (RdRps). RdRps directly catalyze phosphodiester bond formation between nucleoside triphosphates in an RNA‐templated manner. These enzymes are strikingly conserved in their structural and functional features, even among diverse RNA viruses belonging to different families. During host cell infection, the activities of viral RdRps are often regulated by viral cofactor proteins. Cofactors can modulate the type and timing of RNA synthesis by directly engaging the RdRp and/or by indirectly affecting its capacity to recognize template RNA. High‐resolution structures of RdRps as apoenzymes, bound to RNA templates, in the midst of catalysis, and/or interacting with regulatory cofactor proteins, have dramatically increased our understanding of viral RNA synthetic mechanisms. Combined with elegant biochemical studies, such structures are providing a scientific platform for the rational design of antiviral agents aimed at preventing and treating RNA virus‐induced diseases. WIREs RNA 2013, 4:351–367. doi: 10.1002/wrna.1164

This article is categorized under: 1

RNA Interactions with Proteins and Other Molecules > RNA–Protein Complexes

2

RNA in Disease and Development > RNA in Disease

Comparative analysis of Reoviridae reverse genetics methods

Effective methods to engineer the segmented, double-stranded RNA genomes of Reoviridae viruses have only recently been developed. Mammalian orthoreoviruses (MRV) and bluetongue virus (BTV) can be recovered from entirely recombinant reagents, significantly improving the capacity to study the replication, pathogenesis, and transmission of these viruses. Conversely, rotaviruses (RVs), which are the major etiological agent of severe gastroenteritis in infants and children, have thus far only been modified using single-segment replacement methods. Reoviridae reverse genetics techniques universally rely on site-specific initiation of transcription by T7 RNA polymerase to generate the authentic 5' end of recombinant RNA segments, but they vary in how the RNAs are introduced into cells: recombinant BTV is recovered by transfection of in vitro transcribed RNAs, whereas recombinant MRV and RV RNAs are transcribed intracellularly from transfected plasmid cDNAs. Additionally, several parameters have been identified in each system that are essential for recombinant virus recovery. Generating recombinant BTV requires the use of 5' capped RNAs and is enhanced by multiple rounds of RNA transfection, suggesting that translation of viral proteins is likely the rate-limiting step. For RV, the efficiency of recovery is almost entirely dependent on the strength of the selection mechanism used to isolate the single-segment recombinant RV from the unmodified helper virus. The reverse genetics methods for BTV and RV are presented and compared to the previously described MRV methods. Analysis and comparison of each method suggest several key lines of research that might lead to a reverse genetics system for RV, analogous to those used for MRV and BTV.

Mutational analysis of residues involved in nucleotide and divalent cation stabilization in the rotavirus RNA-dependent RNA polymerase catalytic pocket

The rotavirus RNA-dependent RNA polymerase (RdRp), VP1, contains canonical RdRp motifs and a priming loop that is hypothesized to undergo conformational rearrangements during RNA synthesis. In the absence of viral core shell protein VP2, VP1 fails to interact stably with divalent cations or nucleotides and has a retracted priming loop. To identify residues of potential import to nucleotide and divalent cation stabilization, we aligned VP1 of divergent rotaviruses and the structural homolog reovirus λ3. VP1 mutants were engineered and characterized for RNA synthetic capacity in vitro. Conserved aspartic acids in RdRp motifs A and C and arginines in motif F that likely stabilize divalent cations and nucleotides were required for efficient RNA synthesis. Mutation of individual priming loop residues diminished or enhanced RNA synthesis efficiency without obviating the need for VP2, which suggests that this structure serves as a dynamic regulatory element that links RdRp activity to particle assembly.

Structural insights into the coupling of virion assembly and rotavirus replication

Viral replication is rapid and robust, but it is far from a chaotic process. Instead, successful production of infectious progeny requires that events occur in the correct place and at the correct time. Rotaviruses (segmented double-stranded RNA viruses of the Reoviridae family) seem to govern their replication through ordered disassembly and assembly of a triple-layered icosahedral capsid. In recent years, high-resolution structural data have provided unprecedented insight into these events. In this Review, we explore the current understanding of rotavirus replication and how it compares to replication of other Reoviridae family members.