Mutations in coliphage p1 affecting host cell lysis

Functional Dissection of P1 Bacteriophage Holin-like Proteins Reveals the Biological Sense of P1 Lytic System Complexity

P1 is a model temperate myovirus. It infects different Enterobacteriaceae and can develop lytically or form lysogens. Only some P1 adaptation strategies to propagate in different hosts are known. An atypical feature of P1 is the number and organization of cell lysis-associated genes. In addition to SAR-endolysin Lyz, holin LydA, and antiholin LydB, P1 encodes other predicted holins, LydC and LydD. LydD is encoded by the same operon as Lyz, LydA and LydB are encoded by an unlinked operon, and LydC is encoded by an operon preceding the lydA gene. By analyzing the phenotypes of P1 mutants in known or predicted holin genes, we show that all the products of these genes cooperate with the P1 SAR-endolysin in cell lysis and that LydD is a pinholin. The contributions of holins/pinholins to cell lysis by P1 appear to vary depending on the host of P1 and the bacterial growth conditions. The pattern of morphological transitions characteristic of SAR-endolysin–pinholin action dominates during lysis by wild-type P1, but in the case of lydC lydD mutant it changes to that characteristic of classical endolysin-pinholin action. We postulate that the complex lytic system facilitates P1 adaptation to various hosts and their growth conditions.

Cyclic GMP-AMP signalling protects bacteria against viral infection

The cyclic GMP-AMP synthase (cGAS)-STING pathway is a central component of the cell-autonomous innate immune system in animals^1,2. The cGAS protein is a sensor of cytosolic viral DNA and, upon sensing DNA, it produces a cyclic GMP-AMP (cGAMP) signalling molecule that binds to the STING protein and activates the immune response^3-5. The production of cGAMP has also been detected in bacteria⁶, and has been shown, in Vibrio cholerae, to activate a phospholipase that degrades the inner bacterial membrane⁷. However, the biological role of cGAMP signalling in bacteria remains unknown. Here we show that cGAMP signalling is part of an antiphage defence system that is common in bacteria. This system is composed of a four-gene operon that encodes the bacterial cGAS and the associated phospholipase, as well as two enzymes with the eukaryotic-like domains E1, E2 and JAB. We show that this operon confers resistance against a wide variety of phages. Phage infection triggers the production of cGAMP, which-in turn-activates the phospholipase, leading to a loss of membrane integrity and to cell death before completion of phage reproduction. Diverged versions of this system appear in more than 10% of prokaryotic genomes, and we show that variants with effectors other than phospholipase also protect against phage infection. Our results suggest that the eukaryotic cGAS-STING antiviral pathway has ancient evolutionary roots that stem from microbial defences against phages.

Genetics of Phage Lysis

We have been witnessing an increased interest in bacteriophage studies focused on their use as antibacterial agents to fight pathogenic bacteria. This interest is a consequence of the phages' ability to lyse a bacterial host. Until recently, little was known about the mechanisms used by mycobacteriophages to induce lysis of their complex hosts. However, studies on Ms6-induced lysis have changed this scenario and provided new insights into the mechanisms of bacteriophage-induced lysis. Specific lysis protein genes have been identified in mycobacteriophage genomes, reflecting the particular mycobacterial cell envelope composition. These include enzymes that target mycolic acid-containing lipids and proteins that participate in the secretion of the phage endolysin, functioning as chaperone-like proteins. This chapter focuses on the current knowledge of mycobacteriophage-induced lysis, starting with an overview of phage lysis and basic features of the lysis players.

Mycobacteriophage D29 holin C-terminal region functionally assists in holin aggregation and bacterial cell death

Holins are phage-encoded small transmembrane proteins that perforate the bacterial cytoplasmic membrane. In most cases, this process allows the phage-encoded peptidoglycan hydrolases to act on the cell wall, resulting in host cell lysis and phage release. We report a detailed functional characterization of Mycobacterium phage D29 gp11 coding for a putative holin that, upon expression, rapidly kills both Escherichia coli and Mycobacterium smegmatis. We dissected Gp11 by making several deletions and expressing them in E. coli. The shortening of Gp11 from its C-terminus results in diminished cytotoxicity and smaller holes. Evidently, the two transmembrane domains (TMDs) present at the N-terminus of Gp11 are incapable of integrating into the cytoplasmic membrane and do not show toxicity. Interestingly, the fusion of two TMDs and a small C-terminal region that bears the coiled-coil motif resulted in restoration of the cell killing ability of the protein. We further show that the second TMD is dispensable in protein toxicity because its deletion does not abolish Gp11-mediated cell death. We conclude that Gp11 C-terminal region is necessary but not sufficient for toxicity. These results shed light on a yet undiscovered role of Gp11 C-terminal region that will help clarify the mechanism of holin-mediated membrane perforation. Finally, we abolish the toxicity of Gp11 using a specific Gly to Asp substitution in the putative loop region of the protein; the mutant protein may help to clarify how holin functions in mycobacteriophage D29.

Functional analysis of a class I holin, P2 Y

Y is the putative holin gene of the paradigm coliphage P2 and encodes a 93-amino-acid protein. Y is predicted to be an integral membrane protein that adopts an N-out C-in membrane topology with 3 transmembrane domains (TMDs) and a highly charged C-terminal cytoplasmic tail. The same features are observed in the canonical class I lambda holin, the S105 protein of phage lambda, which controls lysis by forming holes in the plasma membrane at a programmed time. S105 has been the subject of intensive genetic, cellular, and biochemical analyses. Although Y is not related to S105 in its primary structure, its characterization might prove useful in discerning the essential traits for holin function. Here, we used physiological and genetic approaches to show that Y exhibits the essential holin functional criteria, namely, allele-specific delayed-onset lethality and sensitivity to the energization of the membrane. Taken together, these results suggest that class I holins share a set of unusual features that are needed for their remarkable ability to program the end of the phage infection cycle with precise timing. However, Y holin function requires the integrity of its short cytoplasmic C-terminal domain, unlike for S105. Finally, instead of encoding a second translational product of Y as an antiholin, as shown for lambda S107, the P2 lysis cassette encodes another predicted membrane protein, LysA, which is shown here to have a Y-specific antiholin character.

Functional analysis of the holin-like proteins of mycobacteriophage Ms6

The mycobacteriophage Ms6 is a temperate double-stranded DNA (dsDNA) bacteriophage which, in addition to the predicted endolysin (LysA)-holin (Gp4) lysis system, encodes three additional proteins within its lysis module: Gp1, LysB, and Gp5. Ms6 Gp4 was previously described as a class II holin-like protein. By analysis of the amino acid sequence of Gp4, an N-terminal signal-arrest-release (SAR) domain was identified, followed by a typical transmembrane domain (TMD), features which have previously been observed for pinholins. A second putative holin gene (gp5) encoding a protein with a predicted single TMD at the N-terminal region was identified at the end of the Ms6 lytic operon. Neither the putative class II holin nor the single TMD polypeptide could trigger lysis in pairwise combinations with the endolysin LysA in Escherichia coli. One-step growth curves and single-burst-size experiments of different Ms6 derivatives with deletions in different regions of the lysis operon demonstrated that the gene products of gp4 and gp5, although nonessential for phage viability, appear to play a role in controlling the timing of lysis: an Ms6 mutant with a deletion of gp4 (Ms6(Δgp4)) caused slightly accelerated lysis, whereas an Ms6(Δgp5) deletion mutant delayed lysis, which is consistent with holin function. Additionally, cross-linking experiments showed that Ms6 Gp4 and Gp5 oligomerize and that both proteins interact. Our results suggest that in Ms6 infection, the correct and programmed timing of lysis is achieved by the combined action of Gp4 and Gp5.

Assembling new Escherichia coli strains by transduction using phage P1

A protocol is described that allows the transfer of genetic material from one Escherichia coli strain to another using bacteriophage P1. P1 transduction can be used to construct new bacterial strains containing multiple alleles, to restore a locus to wild type, to move specific genetic markers from one strain to another, to relocate different mutant genes to a common genetic background, and to evaluate second-site suppression of a mutant allele. Because of these abilities, P1 transduction remains a staple in the arsenal of genetic tools that have kept E. coli at the forefront of model bacterial systems. The protocol incorporates some updated steps and discusses general principles of bacteriophage handling and the infection process.

A novel lysis system in PM2, a lipid-containing marine double-stranded DNA bacteriophage

In this study we investigated the lysis system of the lipid-containing double-stranded DNA bacteriophage PM2 infecting Gram-negative marine Pseudoalteromonas species. We analysed wt and lysis-deficient phage-induced changes in the host physiology and ascribed functions to two PM2 gene products (gp) involved in lysis. We show that bacteriophage PM2 uses a novel system to disrupt the infected cell. The novelty is based on the following findings: (i) gp k is needed for the permeabilization of the cytoplasmic membrane and appears to play the role of a typical holin. However, its unique primary structure [53 aa, 1 transmembrane domain (TMD)] places it into a new class of holins. (ii) We have proposed that, unlike other bacteriophages studied, PM2 relies on lytic factors of the cellular origin for digestion of the peptidoglycan. (iii) gp l (51 aa, no TMDs) is needed for disruption of the outer membrane, which is highly rigidified by the divalent cations abundant in the marine environment. The gp l has no precedent in other phage lytic systems studied so far. However, the presence of open reading frame l-like genes in genomes of other bacterial viruses suggests that the same system might be used by other phages and is not unique to PM2.

Genome of bacteriophage P1

P1 is a bacteriophage of Escherichia coli and other enteric bacteria. It lysogenizes its hosts as a circular, low-copy-number plasmid. We have determined the complete nucleotide sequences of two strains of a P1 thermoinducible mutant, P1 c1-100. The P1 genome (93,601 bp) contains at least 117 genes, of which almost two-thirds had not been sequenced previously and 49 have no homologs in other organisms. Protein-coding genes occupy 92% of the genome and are organized in 45 operons, of which four are decisive for the choice between lysis and lysogeny. Four others ensure plasmid maintenance. The majority of the remaining 37 operons are involved in lytic development. Seventeen operons are transcribed from sigma(70) promoters directly controlled by the master phage repressor C1. Late operons are transcribed from promoters recognized by the E. coli RNA polymerase holoenzyme in the presence of the Lpa protein, the product of a C1-controlled P1 gene. Three species of P1-encoded tRNAs provide differential controls of translation, and a P1-encoded DNA methyltransferase with putative bifunctionality influences transcription, replication, and DNA packaging. The genome is particularly rich in Chi recombinogenic sites. The base content and distribution in P1 DNA indicate that replication of P1 from its plasmid origin had more impact on the base compositional asymmetries of the P1 genome than replication from the lytic origin of replication.

A signal-arrest-release sequence mediates export and control of the phage P1 endolysin

The Lyz endolysin of bacteriophage P1 was found to cause lysis of the host without a holin. Induction of a plasmid-cloned lyz resulted in lysis, and the lytic event could be triggered prematurely by treatments that dissipate the proton-motive force. Instead of requiring a holin, export was mediated by an N-terminal transmembrane domain (TMD) and required host sec function. Exported Lyz of identical SDS/PAGE mobility was found in both the membrane and periplasmic compartments, indicating that periplasmic Lyz was not generated by the proteolytic cleavage of the membrane-associated form. In gene fusion experiments, the Lyz TMD directed PhoA to both the membrane and periplasmic compartments, whereas the TMD of the integral membrane protein FtsI restricts Lyz to the membrane. Thus, the N-terminal domain of Lyz is both necessary and sufficient not only for export of this endolysin to the membrane but also for its release into the periplasm. The unusual N-terminal domain, rich in residues that are weakly hydrophobic, thus functions as a signal-arrest-release sequence, which first acts as a normal signal-arrest domain to direct the endolysin to the periplasm in membrane-tethered form and then allows it to be released as a soluble active enzyme in the periplasm. Examination of the protein sequences of related bacteriophage endolysins suggests that the presence of an N-terminal signal-arrest-release sequence is not unique to Lyz. These observations are discussed in relation to the role of holins in the control of host lysis by bacteriophage encoding a secretory endolysin.

An ancient player unmasked: T4 rI encodes a t-specific antiholin

Phage T4 effects lysis by its holin T and its endolysin E. Lysis is inhibited (LIN) if the infected cell is subjected to secondary infections by T4 phage particles. The T4 rI gene is required for LIN in all hosts tested. Here, we show that a cloned rI gene can impose a T-specific LIN on T-mediated lysis in the context of the phage lambda infective cycle, in the absence of other T4 genes and without secondary infection by T4. Moreover, it is shown that the T holin accumulates in the membrane during LIN, forming SDS-resistant oligomers. We show by cross-linking experiments that a T-RI heterodimer is formed during LIN, demonstrating that RI belongs to the functional class of antiholins, such as the S107 protein of lambda, which heterodimerizes with its cognate holin, S105. Finally, we show that the addition of Ni(2+) ions to the medium can block lysis by a T protein hexahistidine-tagged at its C-terminus, suggesting that liganding of the periplasmic domain is sufficient to impose lysis inhibition. The results are discussed in terms of a model in which the LIN-inducing signal of the secondary infecting phage influences a conformational equilibrium assumed by RI in the periplasm.

Dual regulatory control of a particle maturation function of bacteriophage P1

A unique arrangement of promoter elements was found upstream of the bacteriophage P1 particle maturation gene (mat). A P1-specific late-promoter sequence with conserved elements located at positions -22 and -10 was expected from the function of the gene in phage morphogenesis. In addition to a late-promoter sequence, a -35 element and an operator sequence for the major repressor protein, C1, were found. The -35 and -10 elements constituted an active Escherichia coli sigma(70) consensus promoter, which was converted into a P1-regulated early promoter by the superimposition of a C1 operator. This combination of early- and late-promoter elements regulates and fine-tunes the expression of the particle maturation gene. During lysogenic growth the gene is turned off by P1 immunity functions. Upon induction of lytic growth, the expression of mat starts simultaneously with the expression of other C1-regulated P1 early functions. However, while most of the latter functions are downregulated during late stages of lytic growth the expression of mat continues throughout the entire lytic growth cycle of bacteriophage P1. Thus, the maturation function has a head start on the structural components of the phage particle.

Accessory genes in the darA operon of bacteriophage P1 affect antirestriction function, generalized transduction, head morphogenesis, and host cell lysis

Bacteriophage P1 mutants with the 8.86-kb region between the invertible C-segment and the residential IS1 element deleted from their genome are still able to grow vegetatively and to lysogenize stably, but they show several phenotypic changes. These include the formation of minute plaques due to delayed cell lysis, the abundant production of small-headed particles, a lack of specific internal head proteins, sensitivity to type I host restriction systems, and altered properties to mediate generalized transduction. In the wild-type P1 genome, the accessory genes encoding the functions responsible for these characters are localized in the darA operon that is transcribed late during phage production. We determined the relevant DNA sequence that is located between the C-segment and the IS1 element and contains the cin gene for C-inversion and the accessory genes in the darA operon. The darA operon carries eight open reading frames that could encode polypeptides containing >100 amino acids. Genetic studies indicate that some of these open reading frames, in particular those residing in the 5' part of the darA operon, are responsible for the phenotypic traits identified. The study may contribute to a better comprehension of phage morphogenesis, of the mobilization of host DNA into phage particles mediating generalized transduction, of the defense against type I restriction systems, and of the control of host lysis.

Three functions of bacteriophage P1 involved in cell lysis

Amber and deletion mutants were used to assign functions in cell lysis to three late genes of bacteriophage P1. Two of these genes, lydA and lydB of the dar operon, are 330 and 444 bp in length, respectively, with the stop codon of lydA overlapping the start codon of lydB. The third, gene 17, is 558 bp in length and is located in an otherwise uncharacterized operon. A search with the predicted amino acid sequence of LydA for secondary motifs revealed a holin protein-like structure. Comparison of the deduced amino acid sequence of gene 17 with sequences of proteins in the SwissProt database revealed homologies with the proteins of the T4 lysozyme family. The sequence of lydB is novel and exhibited no known extended homology. To study the effect of gp17, LydA, and LydB in vivo, their genes were cloned in a single operon under the control of the inducible T7 promoter, resulting in plasmid pAW1440. A second plasmid, pAW1442, is identical to pAW1440 but has lydB deleted. Induction of the T7 promoter resulted in a rapid lysis of cells harboring pAW1442. In contrast, cells harboring pAW1440 revealed only a small decrease in optical density at 600 nm compared with cells harboring vector alone. The rapid lysis phenotype in the absence of active LydB suggests that this novel protein might be an antagonist of the holin LydA.

Three new developments in P1 cloning. Increased cloning efficiency, improved clone recovery, and a new P1 mouse library

In this report, we describe three new P1 cloning developments. Two of these developments represent improvements in cloning efficiency and clone recovery, and the third is the production and partial characterization of a new P1 mouse library. To increase cloning efficiency, we have produced a new lysis-defective (delta lydAB) P1 lysogen (NS3690) for the production of the stage II head-tail-P1 packaging extract that is easier to use than the original stage II lysogen (NS3210), and that produces stage II extracts that are five- to eightfold more efficient than the original extracts. We believe the increased efficiency is due to the more concentrated packaging components in the NS3690 extract. Regarding P1 clone recovery, we demonstrate here that the less than optimal recovery of P1 plasmid DNA from P1 clones is due to the continuous presence of the P1 Cre recombinase in the host strain containing those clones (NS3529). Consequently, a simple method of P1 plasmid clone transduction is described to transfer clone DNA from NS3529 (Cre+) to its Cre- parent (NS3516). Yields of P1 plasmid DNA from NS3516 are as much as tenfold higher than from NS3529. Finally, we document here the production of a new P1 mouse library that was generated using genomic DNA from embryonic stem cell line E14 (a 129/0la mouse). The library contains 182,000 independent clones whose average insert size is 80 kb and, based on > 100 polymerase chain reaction screens, has an average unique sequence-hit size of 4.6.

Bacteriophage P1 gene 10 is expressed from a promoter-operator sequence controlled by C1 and Bof proteins

Gene 10 of bacteriophage P1 encodes a regulatory function required for the activation of P1 late promoter sequences. In this report cis and trans regulatory functions involved in the transcriptional control of gene 10 are identified. Plasmid-borne fusions of gene 10 to the indicator gene lacZ were constructed to monitor expression from the gene 10 promoter. Production of gp10-LacZ fusion protein became measurable at about 15 min after prophage induction, whereas no expression was observed during lysogenic growth. The activity of an Escherichia coli-like promoter, Pr94, upstream of gene 10, was confirmed by mapping the initiation site of transcription in primer extension reactions. Two phage-encoded proteins cooperate in the trans regulation of transcription from Pr94: C1 repressor and Bof modulator. Both proteins are necessary for complete repression of gene 10 expression during lysogeny. Under conditions that did not ensure repression by C1 and Bof, the expression of gp10-LacZ fusion proteins from Pr94 interfered with transformation efficiency and cell viability. Results of in vitro DNA-binding studies confirmed that C1 binds specifically to an operator sequence, Op94, which overlaps the -35 region of Pr94. Although Bof alone does not bind to DNA, together with C1 it increases the efficiency of the repressor-operator interaction. These results are in line with the idea that gp10 plays the role of mediator between early and late gene transcription during lytic growth of bacteriophage P1.

Bacteriophage lysis: mechanism and regulation

Bacteriophage lysis involves at least two fundamentally different strategies. Most phages elaborate at least two proteins, one of which is a murein hydrolase, or lysin, and the other is a membrane protein, which is given the designation holin in this review. The function of the holin is to create a lesion in the cytoplasmic membrane through which the murein hydrolase passes to gain access to the murein layer. This is necessary because phage-encoded lysins never have secretory signal sequences and are thus incapable of unassisted escape from the cytoplasm. The holins, whose prototype is the lambda S protein, share a common organization in terms of the arrangement of charged and hydrophobic residues, and they may all contain at least two transmembrane helical domains. The available evidence suggests that holins oligomerize to form nonspecific holes and that this hole-forming step is the regulated step in phage lysis. The correct scheduling of the lysis event is as much an essential feature of holin function as is the hole formation itself. In the second strategy of lysis, used by the small single-stranded DNA phage phi X174 and the single-stranded RNA phage MS2, no murein hydrolase activity is synthesized. Instead, there is a single species of small membrane protein, unlike the holins in primary structure, which somehow causes disruption of the envelope. These lysis proteins function by activation of cellular autolysins. A host locus is required for the lytic function of the phi X174 lysis gene E.

Bacteriophage P1 genes involved in the recognition and cleavage of the phage packaging site (pac)

The packaging of bacteriophage P1 DNA is initiated by cleavage of the viral DNA at a specific site, designated pac. The proteins necessary for that cleavage, and the genes that encode those proteins, are described in this report. By sequencing wild-type P1 DNA and DNA derived from various P1 amber mutants that are deficient in pac cleavage, two distinct genes, referred to as pacA and pacB, were identified. These genes appear to be coordinately transcribed with an upstream P1 gene that encodes a regulator of late P1 gene expression (gene 10). pacA is located upstream from pacB and contains the 161 base-pair pac cleavage site. The predicted sizes of the PacA and PacB proteins are 45 kDa and 56 kDa, respectively. These proteins have been identified on SDS-polyacrylamide gels using extracts derived from Escherichia coli cells that express these genes under the control of a bacteriophage T7 promoter. Extracts prepared from cells expressing both PacA and PacB are proficient for site-specific cleavage of the P1 packaging site, whereas those lacking either protein are not. However, the two defective extracts can complement each other to restore functional pac cleavage activity. Thus, PacA and PacB are two essential bacteriophage proteins required for recognition and cleavage of the P1 packaging site. PacB extracts also contain a second P1 protein that is encoded within the pacB gene. We have identified this protein on SDS-polyacrylamide gels and have shown that it is translated in the same reading frame as is PacB. Its role, if any, in pac cleavage is yet to be determined.

Bacteriophage P1 gene 10 encodes a trans-activating factor required for late gene expression

Amber mutants of bacteriophage P1 were used to identify functions involved in late regulation of the P1 lytic growth cycle. A single function has been genetically identified to be involved in activation of the phage-specific late promoter sequence Ps. In vivo, P1 gene 10 amber mutants fail to trans activate a lacZ operon fusion under the transcriptional control of promoter Ps. Several P1 segments, mapping around position 95 on the P1 chromosome, were cloned into multicopy plasmid vectors. Some of the cloned DNA segments had a deleterious effect on host cells unless they were propagated in a P1 lysogenic background. By deletion and sequence analysis, the harmful effect could be delimited to a 869-bp P1 fragment, containing a 453-bp open reading frame. This open reading frame was shown to be gene 10 by sequencing the amber mutation am10.1 and by marker rescue experiments with a number of other gene 10 amber mutants. Gene 10 codes for an 18.1-kDa protein showing an unusually high density of charged amino acid residues. No significant homology to sequences present in the EMBL/GenBank data base was found, and the protein contained none of the currently known DNA-binding motifs. An in vivo trans activation assay system, consisting of gene 10 under the transcriptional control of an inducible promoter and a gene S/lacZ fusion transcribed from Ps, was used to show that gene 10 is the only phage-encoded function required for late promoter activation.

Expression and proteolytic processing of the darA antirestriction gene product of bacteriophage P1

The darA gene coding for one of the two bacteriophage P1 antirestriction functions is expressed late after infection or induction. The protein is made as a high-molecular-weight soluble precursor. This is proteolytically cleaved to the mature form, which is a structural component of the phage head. Defective mutants of the phage have been found in which the synthesis of gpdarA is normal but processing does not take place. These mutations all map to the same region of the P1 genome and we propose that they lie in the structural gene for the processing protease.

Coliphage P1 morphogenesis: analysis of mutants by electron microscopy

We used electron microscopy and serum blocking power tests to determine the phenotypes of 47 phage P1 amber mutants that have defects in particle morphogenesis. Eleven mutants showed head defects, 30 showed tail defects, and 6 had a defect in particle maturation (which could be either in the head or in the tail). Consideration of previous complementation test results, genetic and physical positions of the mutations, and phenotypes of the mutants allowed assignment of most of the 47 mutations to genes. Thus, a minimum of 12 tail genes, 4 head genes, and 1 particle maturation gene are now known for P1. Of the 12 tail genes, 1 (gene 19, located within the invertible C loop) codes for tail fibers, 6 (genes 3, 5, 16, 20, 21, and 26) code for baseplate components (although one of these genes could code for the tail tube), 1 (gene 22) codes for the sheath, 1 (gene 6) affects tail length, 2 (genes 7 and 25) are involved in tail stability, and 1 (gene 24) either codes for a baseplate component or is involved in tail stability. Of the four head genes, gene 9 codes for a protein required for DNA packaging. The function of head gene 4 is unclear. Head gene 8 probably codes for a minor head protein, whereas head gene 23 could code for either a minor head protein or the major head protein. Excluding the particle maturation gene (gene 1), the 12 tail genes are clustered in three regions of the P1 physical genome. The four head genes are at four separate locations. However, some P1 head genes have not yet been detected and could be located in two regions (for which there are no known genes) adjacent to genes 4 and 8. The P1 morphogenetic gene clusters are interrupted by many genes that are expressed in the prophage.