Genetic recombination of bacteriophage T7 in vivo studied by use of a simple physical assay

Functional analysis of the ABF1-binding sites within the Ya regions of the MATa and HMRa loci of Saccharomyces cerevisiae

Cell type in the yeast Saccharomyces cerevisiae is determined by information present at the MAT locus. Cells can switch mating types when cell-type information located at a silent locus, HML or HMR, is transposed to the MAT locus. The HML and HMR loci are kept silent through the action of a number of proteins, one of which is the DNA-binding protein, ABF1. We have identified a binding site for ABF1 within the Ya region of MATa and HMRa. In order to examine the function of this ABF1-binding site, we have constructed strains that lack the site in the MATa or HMRa loci. Consistent with the idea that ABF1 plays a redundant role in silencing, it was found that a triple deletion of the ABF1-binding sites at HMRE, Ya and I did not permit the expression of HMRa. We have also shown that chromosomal deletion of the binding site at MATYa had no effect on the level of cutting by the HO endonuclease nor on the amount of mating-type switching observed. Similarly, chromosomal deletion of all three ABF1-binding sites at HMRa had no effect on the directionality of mating-type switching.

T7 endonuclease I resolves Holliday junctions formed in vitro by RecA protein

T7 endonuclease I is known to bind and cleave four-way junctions in DNA. Since these junctions serve as analogues of Holliday junctions that arise during genetic recombination, we have investigated the action of T7 endonuclease I on recombination intermediates containing Holliday junctions. We find that addition of T7 endonuclease I to strand exchange reactions catalysed by RecA protein of Escherichia coli leads to the formation of duplex products that correspond to 'patch' and 'splice' type recombinants. Resolution of the recombination intermediates occurs by the introduction of nicks at the site of the Holliday junction. The recombinant molecules contain 5'-phosphate and 3'-hydroxyl termini which may be ligated to restore the integrity of the DNA.

Specificity of binding to four-way junctions in DNA by bacteriophage T7 endonuclease I

T7 endonuclease I binds specifically to four-way junctions in duplex DNA and promotes their resolution into linear duplexes. Under conditions in which the nuclease activity is blocked by the absence of divalent cations, the enzyme forms a distinct protein-DNA complex with the junction, as detected by gel retardation and filter binding assays. The formation of this complex is structure-specific and contrasts with the short-lived binding complexes formed on linear duplex DNA. The binding complex between T7 endonuclease I and a synthetic Holliday junction analog has been probed with hydroxyl radicals. The results indicate that the nuclease binds all four strands about the junction point.

Multidimensional analysis of intracellular bacteriophage T7 DNA: effects of amber mutations in genes 3 and 19

By use of rate-zonal centrifugation, followed by either one- or two-dimensional agarose gel electrophoresis, the forms of intracellular bacteriophage T7 DNA produced by replication, recombination, and packaging have been analyzed. Previous studies had shown that at least some intracellular DNA with sedimentation coefficients between 32S (the S value of mature T7 DNA) and 100S is concatemeric, i.e., linear and longer than mature T7 DNA. The analysis presented here confirmed that most of this DNA is linear, but also revealed a significant amount of circular DNA. The data suggest that these circles are produced during DNA packaging. It is proposed that circles are produced after a capsid has bound two sequential genomes in a concatemer. The size distribution of the linear, concatemeric DNA had peaks at the positions of dimeric and trimeric concatemers. Restriction endonuclease analysis revealed that most of the mature T7 DNA subunits of concatemers were joined left end to right end. However, these data also suggest that a comparatively small amount of left-end to left-end joining occurs, possibly by blunt-end ligation. A replicating form of T7 DNA that had an S value greater than 100 (100S+ DNA) was also found to contain concatemers. However, some of the 100S+ DNA, probably the most branched component, remained associated with the origin after agarose gel electrophoresis. It has been found that T7 protein 19, known to be required for DNA packaging, was also required to prevent loss, probably by nucleolytic degradation, of the right end of all forms of intracellular T7 DNA. T7 gene 3 endonuclease, whose activity is required for both recombination of T7 DNA and degradation of host DNA, was required for the formation of the 32S to 100S molecules that behaved as concatemers during gel electrophoresis. In the absence of gene 3 endonuclease, the primary accumulation product was origin-associated 100S+ DNA with properties that suggest the accumulation of branches, primarily at the left end of mature DNA subunits within the 100S+ DNA.

Partial purification of an enzyme from Saccharomyces cerevisiae that cleaves Holliday junctions

An enzyme from Saccharomyces cerevisiae that cleaves Holliday junctions was partially purified approximately 500- to 1000-fold by DEAE-cellulose chromatography, gel filtration on Sephacryl S300, and chromatography on single-stranded DNA-cellulose. The partially purified enzyme did not have any detectable nuclease activity when tested with single-stranded or double-stranded bacteriophage T7 substrate DNA and did not have detectable endonuclease activity when tested with bacteriophage M13 viral DNA or plasmid pBR322 covalently closed circular DNA. Analysis of the products of the cruciform cleavage reaction by electrophoresis on polyacrylamide gels under denaturing conditions revealed that the cruciform structure was cleaved at either of two sites present in the stem of the cruciform and was not cleaved at the end of the stem. The cruciform cleavage enzyme was able to cleave the Holliday junction present in bacteriophage G4 figure-8 molecules. Eighty percent of these Holliday junctions were cleaved in the proper orientation to generate intact chromosomes during genetic recombination.

Cloning, expression, and purification of gene 3 endonuclease from bacteriophage T7

The structural gene for the single-stranded endonuclease coded for by gene 3 of bacteriophage T7 has been cloned in pGW7, a derivative of the plasmid pBR322, which contains the lambda PL promoter and the gene for the temperature-sensitive lambda repressor, cI857. The complete gene 3 DNA sequence has been placed downstream of the PL promoter, and the endonuclease is overproduced by temperature induction at mid-log phase of Escherichia coli carrying the recombinant plasmid pTP2. Despite the fact that cell growth rapidly declines due to toxic effects of the excess endonuclease, significant amounts of the enzyme can be isolated in nearly homogeneous form from the induced cells. An assay of nuclease activity has been devised using gel electrophoresis of the product DNA fragments from DNA substrates. These assays show the enzyme to have an absolute requirement for Mg(II) (10 mM), a broad pH optimum near pH 7, but significant activity from pH 3 to pH 9, and a 10-100-fold preference for single-stranded DNA (ssDNA). The enzyme is readily inactivated by ethylenediaminetetraacetic acid or high salt. The differential activity in favor of ssDNA can be exploited to map small single-stranded regions in double-stranded DNAs as shown by cleavage of the melted region of an open complex of T7 RNA polymerase and its promoter.

Plasmid-phage recombination in T7 infected Escherichia coli

Recombination between genetically marked T7 bacteriophage and plasmids containing inserts of T7 DNA has been studied in order to gain some insight into the phage recombination process. The results suggest that plasmid-phage recombination requires the products of T7 genes 3 (endonuclease), 4 (DNA primase), 5 (DNA polymerase), and 6 (exonuclease), as has been demonstrated previously for phage-phage recombination. Plasmid replication does not compensate for a complete block in phage polymerase synthesis, suggesting a direct role for this enzyme in recombination, rather than an indirect role, by means of producing replicative structures that are recombinogenic. In most respects, plasmid-phage recombination appears to be similar to phage-phage recombination. The participation of two autonomous, structurally dissimilar, homologues, however, might render certain aspects of the recombination process more amenable to analysis. As examples, the characterization of an apparent marker effect and the demonstration of genetic heterozygotes among the products of plasmid-phage recombination are presented.

In vitro recombination of bacteriophage T7 DNA detected by a direct physical assay

We developed a simple, direct, physical assay to detect genetic recombination of bacteriophage T7 DNA in vitro. In this assay two mature T7 DNA molecules, each having a unique restriction enzyme site, are incubated in the presence of a cell-free extract from T7-infected Escherichia coli cells. After extraction of the DNA, restriction enzyme digestion, and agarose gel electrophoresis, genetic recombination is detected by the appearance of a novel recombinant DNA band. Recombination frequencies as high as 13% have been observed. We used this assay to determine the genetic requirements for in vitro recombination. In agreement with results obtained previously with a biological assay, T7 recombination in vitro appears to proceed via two distinct pathways.

Genetic recombination of bacterial plasmid DNA. Physical and genetic analysis of the products of plasmid recombination in Escherichia coli

Derivatives of plasmid pBR322 DNA containing tet mutations were constructed by inserting XhoI linkers at various sites in the tetracycline resistance gene. Monomer plasmids containing either the tet-10 allele located at nucleotide position 23 or the tet-14 allele located at nucleotide position 1267 were used to construct a circular dimer containing one copy of each allele and a circular trimer containing one copy of the tet-10 allele and two copies of the tet-14 allele. Genetic recombination of these plasmid DNAs to produce a functional tetracycline resistance gene could be detected as the production of tetracycline-resistant progeny during the growth of transformants or using a restriction mapping assay which detected the rearrangement of the mutant alleles. The structure of individual tetracycline-resistant recombination products was determined by restriction mapping. This analysis suggested that as many as 70% of the plasmid recombination events in Escherichia coli AB1157 could have involved gene conversion events. The formation of these recombination products was most easily predicted by a model involving figure 8 recombination intermediates and the formation of symmetric regions of heteroduplex. Recombination in JC10287 delta(srlR-recA)304 occurred at 5% of the wild-type frequency and appeared to occur by a similar mechanism. Recombination in JC9604 recA56 recB21 recC22 sbcA23 occurred at 20 times the wild-type frequency and appeared to involve multiple independent recombination events.

Bacteriophage T7 defective in the gene 6 exonuclease promotes site-specific cleavages of T7 DNA in vivo and in vitro

Site-specific cleavages of intracellular DNA were demonstrated in bacteriophage T7 6am-infected cells. The sites of the cleavages were located at 46.8 and 68.7% (1% of the T7 DNA length = 400 base pairs) from the left end of the T7 genome. These cleavages required the products of genes 3 (endonuclease), 4 (DNA primase), and 5 (DNA polymerase). However, the product of gene 6 (exonuclease) must be absent. Site-specific cleavage was also shown to occur in vitro in extracts of T7 6am-infected cells, although at a different site: 82.8% from the left end of the T7 genome.