Atomic force microscopy investigation of isolated virions of murine leukemia virus

Material properties of viral nanocages explored by atomic force microscopy

Single-particle nanoindentation by atomic force microscopy (AFM) is an emergent technique to characterize the material properties of nano-sized proteinaceous systems. AFM uses a very small tip attached to a cantilever to scan the surface of the substrate. As a result of the sensitive feedback loop of AFM, the force applied by the tip on the substrate during scanning can be controlled and monitored. By accurately controlling this scanning force, topographical maps of fragile substrates can be acquired to study the morphology of the substrate. In addition, mechanical properties of the substrate like stiffness and breaking point can be determined by using the force spectroscopy capability of AFM. Here we discuss basics of AFM operation and how this technique is used to determine the structure and mechanical properties of protein nanocages, in particular viral particles. Knowledge of morphology as well as mechanical properties is essential for understanding viral life cycles, including genome packaging, capsid maturation, and uncoating, but also contributes to the development of diagnostics, vaccines, imaging modalities, and targeted therapeutic devices based on viruslike particles.

Morphogenesis of mimivirus and its viral factories: an atomic force microscopy study of infected cells

Amoebas infected with mimivirus were disrupted at sequential stages of virus production and were visualized by atomic force microscopy. The development of virus factories proceeded over 3 to 4 h postinfection and resulted from the coalescence of 0.5- to 2-μm vesicles, possibly bearing nucleic acid, derived from either the nuclear membrane or the closely associated rough endoplasmic reticulum. Virus factories actively producing virus capsids on their surfaces were imaged, and this allowed the morphogenesis of the capsids to be delineated. The first feature to appear on a virus factory surface when a new capsid is born is the center of a stargate, which is a pentameric protein oligomer. As the arms of the stargate grow from the pentamer, a rough disk the diameter of a capsid thickens around it. This marks the initial emergence of a protein-coated membrane vesicle. The capsid self-assembles on the vesicle. Hillocks capped by different pentameric proteins spontaneously appear on the emerging vesicle at positions that are ultimately occupied by 5-fold icosahedral vertices. A lattice of coat protein nucleates at each of the 5-fold vertices, but not at the stargate, and then spreads outward from the vertices over the surface, merging seamlessly to complete the icosahedral capsid. Filling with DNA and associated proteins occurs by the transfer of nucleic acid from the interior of the virus factory into the nearly completed capsids. The portal, through which the DNA enters, is sealed by a plug of protein having a diameter of about 40 nm. A layer of integument protein that anchors the surface fibers is acquired by the passage of capsids through a membrane enriched in the protein. The coating of surface fibers is similarly acquired when the integument protein-coated capsids pass through a second membrane that has a forest of surface fibers embedded on one side.

An atomic force microscopy investigation of cyanophage structure

Marine viruses have only relatively recently come to the attention of molecular biologists, and the extraordinary diversity of potential host organisms suggests a new wealth of genetic and structural forms. A promising technology for characterizing and describing the viruses structurally is atomic force microscopy (AFM). We provide examples here of some of the different architectures and novel structural features that emerge from even a very limited investigation, one focused on cyanophages, viruses that infect cyanobacteria (blue-green algae). These were isolated by phage selection of viruses collected from California coastal waters. We present AFM images of tailed, spherical, filamentous, rod shaped viruses, and others of eccentric form. Among the tailed phages numerous myoviruses were observed, some having long tail fibers, some other none, and some having no visible baseplate. Syphoviruses and a podovirus were also seen. We also describe a unique structural features found on some tailed marine phages that appear to have no terrestrial homolog. These are long, 450 nm, complex helical tail fibers terminating in a unique pattern of 3+1 globular units made up of about 20 small proteins.

Atomic force microscopy in imaging of viruses and virus-infected cells

Atomic force microscopy (AFM) can visualize almost everything pertinent to structural virology and at resolutions that approach those for electron microscopy (EM). Membranes have been identified, RNA and DNA have been visualized, and large protein assemblies have been resolved into component substructures. Capsids of icosahedral viruses and the icosahedral capsids of enveloped viruses have been seen at high resolution, in some cases sufficiently high to deduce the arrangement of proteins in the capsomeres as well as the triangulation number (T). Viruses have been recorded budding from infected cells and suffering the consequences of a variety of stresses. Mutant viruses have been examined and phenotypes described. Unusual structural features have appeared, and the unexpectedly great amount of structural nonconformity within populations of particles has been documented. Samples may be imaged in air or in fluids (including culture medium or buffer), in situ on cell surfaces, or after histological procedures. AFM is nonintrusive and nondestructive, and it can be applied to soft biological samples, particularly when the tapping mode is employed. In principle, only a single cell or virion need be imaged to learn of its structure, though normally images of as many as is practical are collected. While lateral resolution, limited by the width of the cantilever tip, is a few nanometers, height resolution is exceptional, at approximately 0.5 nm. AFM produces three-dimensional, topological images that accurately depict the surface features of the virus or cell under study. The images resemble common light photographic images and require little interpretation. The structures of viruses observed by AFM are consistent with models derived by X-ray crystallography and cryo-EM.

Application of AFM and optical biosensor for investigation of complexes formed in P450-containing monooxygenase systems

Atomic force microscopy (AFM) allows to visualize and count the individual protein molecules and their complexes within multiprotein systems. On the other hand, optical biosensor (OB) provides information on complex formation kinetics as well as complex lifetime (τ(LT)) and affinity. Comparison of complex lifetime τ(LT) with the time required for enzyme's catalytic cycle (τ(cat)) enables to characterize productive complexes and distinguish them from non-productive ones. Both these approaches were applied for the analysis of the three cytochrome P450-containing monooxygenase systems: cytochrome P450 101, cytochrome P450 11A1 and cytochrome P450 2B4. By using AFM, the formation of binary and ternary protein complexes was registered in all the three systems. OB analysis enabled to kinetically characterize these binary and ternary complexes. It was shown that the binary complexes putidaredoxin reductase (PdR)/putidaredoxin (Pd) and Pd/cytochrome P450 101 (P450 101) formed within the P450 101 system and, also, the binary complexes adrenodoxin reductase (AdR)/adrenodoxin (Ad) and Ad/cytochrome P450 11A1 (P450 11A1) formed within the P450 11A1 system are non-productive (deadlock). At the same time, the ternary PdR/Pd/P450 101 and AdR/Ad/P450 11A1 complexes proved to be productive. The binary cytochrome P450 reductase (Fp)/cytochrome P450 2B4 (2B4) complexes and the ternary Fp/2B4/cytochrome b5 (b5) complexes formed within P450 2B4 system were productive.

Structural analysis of a Synechococcus myovirus S-CAM4 and infected cells by atomic force microscopy

A tailed cyanophage, S-CAM4 (family Myoviridae) from California coastal waters that infects Synechococcus, was characterized by atomic force microscopy. Capsomeric clusters of protein composing the 85 nm diameter icosahedral head were resolved and indicated a triangulation number of T=16. The 140 nm tail assembly, exhibiting a helical appearance with a 13 nm pitch, was seen in both extended and contracted states, the latter exposing the injection tube within. Attached below the base plate were six 50 nm long fibres, and six fibres 275-300 nm in length protruded from the periphery of the base plate. Protein-free DNA was abundant from ruptured heads. Virus attached en masse, in clusters and individually to cells, and cell fragments were recorded, as were perforated cells lysed by the phages. The capsid structure appears most closely related to that of the cyanophage Syn9 and the Bacillus subtilis phage SPO1, which may, in turn, be evolutionarily related to herpesvirus.

AFM of biological complexes: what can we learn?

The term "biological complexes" broadly encompasses particles as diverse as multisubunit enzymes, viral capsids, transport cages, molecular nets, ribosomes, nucleosomes, biological membrane components and amyloids. The complexes represent a broad range of stability and composition. Atomic force microscopy offers a wealth of structural and functional data about such assemblies. For this review, we choose to comment on the significance of AFM to study various aspects of biology of selected nonmembrane protein assemblies. Such particles are large enough to reveal many structural details under the AFM probe. Importantly, the specific advantages of the method allow for gathering dynamic information about their formation, stability or allosteric structural changes critical for their function. Some of them have already found their way to nanomedical or nanotechnological applications. Here we present examples of studies where the AFM provided pioneering information about the biology of complexes, and examples of studies where the simplicity of the method is used toward the development of potential diagnostic applications.

Directly monitoring individual retrovirus budding events using atomic force microscopy

Retrovirus budding is a key step in the virus replication cycle. Nonetheless, very little is known about the underlying mechanism of budding, primarily due to technical limitations preventing visualization of bud formation in real time. Methods capable of monitoring budding dynamics suffer from insufficient resolution, whereas other methods, such as electron microscopy, do not have the ability to operate under physiological conditions. Here we applied atomic force microscopy to real-time visualization of individual Moloney murine leukemia virus budding events. By using a single-particle analysis approach, we were able to observe distinct patterns in budding that otherwise remain transparent. We find that bud formation follows at least two kinetically distinct pathways. The majority of virions (74%) are produced in a slow process (>45 min), and the remaining particles (26%) assemble via a fast process (<25 min). Interestingly, repetitive budding from the same site was seen to occur in only two locations. This finding challenges the hypothesis that viral budding occurs from distinct sites and suggests that budding is not restricted laterally. In this study, we established a method to monitor the fine dynamics of the virus budding process. Using this single-particle analysis to study mutated viruses will enable us to gain additional insight into the mechanisms of viral budding.

Cellular chemomechanics at interfaces: sensing, integration and response

Living cells are complex entities whose remarkable, emergent capacity to sense, integrate, and respond to environmental cues relies on an intricate series of interactions among the cell's macromolecular components. Defects in mechanosensing, transduction,or responses underlie many diseases such as cancers, immune disorders, cardiac hypertrophy, genetic malformations, and neuropathies. Here, we highlight micro- and nanotechnology-based tools that have been used to study how chemical and mechanical cues modulate the responses of single cells in contact with the extracellular environment. Understanding the physical aspects of these complex processes at the micro- and nanometer scale could produce profound and fundamental new insights into how the processes of cell migration, metastasis, immune function and other areas which are regulated by mechanical forces.

Mutation in the glycosylated gag protein of murine leukemia virus results in reduced in vivo infectivity and a novel defect in viral budding or release

All gammaretroviruses, including murine leukemia viruses (MuLVs), feline leukemia viruses, and gibbon-ape leukemia virus, encode an alternate, glycosylated form of Gag polyprotein (glyco-Gag or gPr80gag) in addition to the polyprotein precursor of the viral capsid proteins (Pr65gag). gPr80gag is translated from an upstream in-frame CUG initiation codon, in contrast to the AUG codon used for Pr65gag. The role of glyco-Gag in MuLV replication has been unclear, since gPr80gag-negative Moloney MuLV (M-MuLV) mutants are replication competent in vitro and pathogenic in vivo. However, reversion to the wild type is frequently observed in vivo. In these experiments, in vivo inoculation of a gPr80gag mutant, Ab-X-M-MuLV, showed substantially lower (2 log) initial infectivity in newborn NIH Swiss mice than that of wild-type virus, and revertants to the wild type could be detected by PCR cloning and DNA sequencing as early as 15 days postinfection. Atomic force microscopy of Ab-X-M-MuLV-infected producer cells or of the PA317 amphotropic MuLV-based vector packaging line (also gPr80gag negative) revealed the presence of tube-like viral structures on the cell surface. In contrast, wild-type virus-infected cells showed the typical spherical, 145-nm particles observed previously. Expression of gPr80gag in PA317 cells converted the tube-like structures to typical spherical particles. PA317 cells expressing gPr80gag produced 5- to 10-fold more infectious vector or viral particles as well. Metabolic labeling studies indicated that this reflected enhanced virus particle release rather than increased viral protein synthesis. These results indicate that gPr80gag is important for M-MuLV replication in vivo and in vitro and that the protein may be involved in a late step in viral budding or release.