Comparison of targeted-gene replacement frequencies in Drosophila melanogaster at the forked and white loci

Generation of a useful roX1 allele by targeted gene conversion

Methods for altering the sequence of endogenous Drosophila melanogaster genes remain labor-intensive. We have tested a relatively simple strategy that enables the introduction of engineered mutations in the vicinity of existing P-elements. This method was used to generate useful alleles of the roX1 gene, which produces a noncoding RNA involved in dosage compensation. The desired change was first introduced into a genomic clone of roX1 and transgenic flies were generated that carry this sequence in a P-element. Targeted transposition was then used to move the P-element into roX1. Remobilization of the targeted insertion produced large numbers of offspring carrying chromosomes that had precisely introduced the engineered sequences into roX1. We postulate that this occurred by gap repair, using the P-element on the sister chromatid as template. This strategy was used to introduce six MS2 loops into the roX1 gene (roX1^MS2-6), enabling detection of roX1 RNA by a MCP-GFP fusion protein in embryos. The roX1^MS2-6 remains under the control of the authentic promoter and within the correct genomic context, features expected to contribute to normal roX1 function. The ability to replace relatively large blocks of sequence suggests that this method will be of general use.

Drosophila mini-white model system: new insights into positive position effects and the role of transcriptional terminators and gypsy insulator in transgene shielding

The white gene, which is responsible for eye pigmentation, is widely used to study position effects in Drosophila. As a result of insertion of P-element vectors containing mini-white without enhancers into random chromosomal sites, flies with different eye color phenotypes appear, which is usually explained by the influence of positive/negative regulatory elements located around the insertion site. We found that, in more than 70% of cases when mini-white expression was subject to positive position effects, deletion of the white promoter had no effect on eye pigmentation; in these cases, the transposon was inserted into the transcribed regions of genes. Therefore, transcription through the mini-white gene could be responsible for high levels of its expression in most of chromosomal sites. Consistently with this conclusion, transcriptional terminators proved to be efficient in protecting mini-white expression from positive position effects. On the other hand, the best characterized Drosophila gypsy insulator was poorly effective in terminating transcription and, as a consequence, only partially protected mini-white expression from these effects. Thus, to ensure maximum protection of a transgene from position effects, a perfect boundary/insulator element should combine three activities: to block enhancers, to provide a barrier between active and repressed chromatin, and to terminate transcription.

Differential usage of alternative pathways of double-strand break repair in Drosophila

Double-strand DNA breaks can be repaired by any of several alternative mechanisms that differ greatly in the nature of the final repaired products. We used a reporter construct, designated "Repair reporter 3" (Rr3), to measure the relative usage of these pathways in Drosophila germ cells. The method works by creating a double-strand break at a specific location such that expression of the red fluorescent protein, DsRed, in the next generation can be used to infer the frequency at which each pathway was used. A key feature of this approach is that most data come from phenotypic scoring, thus allowing large sample sizes and considerable precision in measurements. Specifically, we measured the proportion of breaks repaired by (1) conversion repair, (2) nonhomologous end joining (NHEJ), or (3) single-strand annealing (SSA). For conversion repair, the frequency of mitotic crossing over in the germ line indicates the relative prevalence of repair by double Holliday junction (DHJ) formation vs. the synthesis-dependent strand annealing (SDSA) pathway. We used this method to show that breaks occurring early in germ-line development were much more frequently repaired via single-strand annealing and much less likely to be repaired by end joining compared with identical breaks occurring later in development. Conversion repair was relatively rare when breaks were made either very early or very late in development, but was much more frequent in between. Significantly, the changes in relative usage occurred in a compensatory fashion, such that an increase in one pathway was accompanied by decreases in others. This negative correlation is interpreted to mean that the pathways for double-strand break repair compete with each other to handle a given breakage event.

Knockout targeting of the Drosophila nap1 gene and examination of DNA repair tracts in the recombination products

We used ends-in gene targeting to generate knockout mutations of the nucleosome assembly protein 1 (Nap1) gene in Drosophila melanogaster. Three independent targeted null-knockout mutations were produced. No wild-type NAP1 protein could be detected in protein extracts. Homozygous Nap1(KO) knockout flies were either embryonic lethal or poorly viable adult escapers. Three additional targeted recombination products were viable. To gain insight into the underlying molecular processes we examined conversion tracts in the recombination products. In nearly all cases the I-SceI endonuclease site of the donor vector was replaced by the wild-type Nap1 sequence. This indicated exonuclease processing at the site of the double-strand break (DSB), followed by replicative repair at donor-target junctions. The targeting products are best interpreted either by the classical DSB repair model or by the break-induced recombination (BIR) model. Synthesis-dependent strand annealing (SDSA), which is another important recombinational repair pathway in the germline, does not explain ends-in targeting products. We conclude that this example of gene targeting at the Nap1 locus provides added support for the efficiency of this method and its usefulness in targeting any arbitrary locus in the Drosophila genome.

A sensitive and rapid assay for homologous recombination in mosquito cells: impact of vector topology and implications for gene targeting

BACKGROUND

Recent progress in insect transgenesis has been dramatic but existing transposon-based approaches are constrained by position effects and potential instability. Gene targeting would bring a number of benefits, however progress requires a better understanding of the mechanisms involved. Much can be learned in vitro since extrachromosomal recombination occurs at high frequency, facilitating the study of multiple events and the impact of structural changes among the recombining molecules. We have investigated homologous recombination in mosquito cells through restoration of luciferase activity from deleted substrates. The implications of this work for the construction of insect gene targeting vectors are discussed.

RESULTS

We show that linear targeting vectors are significantly more efficient than circular ones and that recombination is stimulated by introducing double-strand breaks into, or near, the region of homology. Single-strand annealing represents a very efficient pathway but may not be feasible for targeting unbroken chromosomes. Using circular plasmids to mimic chromosomal targets, one-sided invasion appears to be the predominant pathway for homologous recombination. Non-homologous end joining reactions also occur and may be utilised in gene targeting if double-strand breaks are first introduced into the target site.

CONCLUSIONS

We describe a rapid, sensitive assay for extrachromosomal homologous recombination in mosquito cells. Variations in substrate topology suggest that single-strand annealing and one-sided invasion represent the predominant pathways, although non-homologous end joining reactions also occur. One-sided invasion of circular chromosomal mimics by linear vectors might therefore be used in vitro to investigate the design and efficiency of gene targeting strategies.

Expression of the 53 kD forked protein rescues F-actin bundle formation and mutant bristle phenotypes in Drosophila

forked mutations affect bristle development in Drosophila pupae, resulting in short, thick, gnarled bristles in the adult. The forked proteins are components of 200-300-microm-long actin fiber bundles that are present transiently during pupal development [Petersen et al., 1994: Genetics 136:173-182]. These bundles are composed of segments of 3-10 microm long, and forked protein is localized along the actin fiber bundle segments and accumulates at the junctions connecting them longitudinally. In the forked mutants, f(36a) and f(hd), F-actin bundles are greatly reduced in number and size, and bundle segmentation is absent. The p-element, P[w(+), falter] contains a 5.3-kb fragment of the forked gene that encodes the 53-kD forked protein [Lankenau et al., 1996: Mol Cell Biol 16:3535-3544]. Expression of only the 53-kD forked protein is sufficient to rescue the actin bundle and bristle phenotypes of f(36a) and f(hd) mutant flies. The 5.3-kb forked sequence, although smaller than the 13-kb region previously shown to rescue forked mutants [Petersen et al., 1994: Genetics 136:173-182], does contain the core forked sequence that encodes actin binding and bundling domains in cultured mammalian cells [Grieshaber and Petersen, 1999: J Cell Sci 112:2203-2211]. These data show that the 53-kD forked protein is sufficient for normal bristle development and that the domains shown previously to be important for actin bundling in cell culture may be all that are required for normal actin bundle formation in developing Drosophila bristles.

Gene targeting in mosquito cells: a demonstration of 'knockout' technology in extrachromosomal gene arrays

BACKGROUND

Gene targeting would offer a number of advantages over current transposon-based strategies for insect transformation. These include freedom from both position effects associated with quasi-random integration and concerns over transgene instability mediated by endogenous transposases, independence from phylogenetic restrictions on transposon mobility and the ability to generate gene knockouts.

RESULTS

We describe here our initial investigations of gene targeting in the mosquito. The target site was a hygromycin resistance gene, stably maintained as part of an extrachromosomal array. Using a promoter-trap strategy to enrich for targeted events, a neomycin resistance gene was integrated into the target site. This resulted in knockout of hygromycin resistance concurrent with the expression of high levels of neomycin resistance from the resident promoter. PCR amplification of the targeted site generated a product that was specific to the targeted cell line and consistent with precise integration of the neomycin resistance gene into the 5' end of the hygromycin resistance gene. Sequencing of the PCR product and Southern analysis of cellular DNA subsequently confirmed this molecular structure.

CONCLUSIONS

These experiments provide the first demonstration of gene targeting in mosquito tissue and show that mosquito cells possess the necessary machinery to bring about precise integration of exogenous sequences through homologous recombination. Further development of these procedures and their extension to chromosomally located targets hold much promise for the exploitation of gene targeting in a wide range of medically and economically important insect species.

Ac insertion site affects the frequency of transposon-induced homologous recombination at the maize p1 locus

The maize p1 gene regulates the production of a red pigment in the kernel pericarp, cob, and other maize floral tissues. Insertions of the transposable element Ac can induce recombination between two highly homologous 5.2-kb direct repeat sequences that flank the p1 gene-coding region. Here, we tested the effects of the Ac insertion site and orientation on the induction of recombination at the p1 locus. A collection of unique p1 gene alleles was used, which carry Ac insertions at different sites in and near the p1 locus, outside of the direct repeats, within the direct repeat sequences, and between the direct repeats, in both orientations. Recombination was scored by the numbers of colorless pericarp sectors (somatic frequency) and heritable mutations (germinal frequency). In both the somatic and germinal tests, the frequency of homologous recombination is significantly higher when Ac is inserted between the direct repeats than when Ac is inserted either within or outside the repeats. In contrast, Ac orientation had no significant effect on recombination frequency. We discuss these results in terms of the possible mechanisms of transposon-induced recombination.

Resistance to gap repair of the transposon Tam3 in Antirrhinum majus: a role of the end regions

The extremely homogeneous organization of the transposon family Tam3 in Antirrhinum majus is in sharp contrast to the heterogeneity of the copies constituting many other transposon families. To address the issue of the Tam3 structural uniformity, we examined two possibilities: (1) recent invasion of Tam3 and (2) failure of gap repair, which is involved in conversion from autonomous forms to defective forms. The phylogenetic analysis of 17 Tam3 copies suggested that the invasion of Tam3 into the Antirrhinum genome occurred at least 5 mya, which is sufficiently long ago to have produced many aberrant copies by gap repair. Thus, we investigated gap repair events at the nivea(recurrens:Tam3) (niv(rec)::Tam3) allele, where Tam3 is actively excised. We show here that the gap repair of de novo somatic Tam3 excision was arrested immediately after initiation of the process. All of the identified gap repair products were short stretches, no longer than 150 bp from the ends. The Tam3 ends have hairpin structures with low free energies. We observed that the gap repair halted within the hairpin structure regions. Such small gap repair products appear to be distributed in the Antirrhinum genome, but are unlikely to be active. Our data strongly suggest that the structural homogeneity of Tam3 was caused by immunity to gap repair at the hairpins in both of the end regions. The frequency of extensive gap repair of de novo excision products in eukaryotic transposons was found to be correlated with the free energies of the secondary structures in the end regions. This fact suggests that the fates of transposon families might depend on the structures of their ends.

Origination of Ds elements from Ac elements in maize: evidence for rare repair synthesis at the site of Ac excision

Although it has been known for some time that the maize transposon Ac can mutate to Ds by undergoing internal deletions, the mechanism by which these mutations arise has remained conjectural. To gain further insight into this mechanism in maize we have studied a series of Ds elements that originated de novo from Ac elements at known locations in the genome. We present evidence that new, internally deleted Ds elements can arise at the Ac donor site when Ac transposes to another site in the genome. However, internal deletions are rare relative to Ac excision footprints, the predominant products of Ac transposition. We have characterized the deletion junctions in five new Ds elements. Short direct repeats of variable length occur adjacent to the deletion junction in three of the five Ds derivatives. In the remaining two, extra sequences or filler DNA is inserted at the junction. The filler DNAs are identical to sequences found close to the junction in the Ac DNA, where they are flanked by the same sequences that flank the filler DNA in the deletion. These findings are explained most simply by a mechanism involving error-prone DNA replication as an occasional alternative to end-joining in the repair of Ac-generated double-strand breaks.

In vivo gap repair in Drosophila: a one-way street with many destinations

While it has long been possible to study the process of recombination in yeast and other single-celled organisms, it has been difficult to distinguish between pathways of meiotic and mitotic recombination in multicellular eukaryotes. The experimental system described here bridges the historically separated fields of Genetic Recombination and DNA Repair in Drosophila. It is now feasible to study the repair of unique double-strand breaks induced in the Drosophila genome by the excision of a P-transposable element or by cleavage at an introduced endonuclease recognition sequence. This repair can be studied in both somatic cells and mitotically dividing germ cells. The repair of these breaks occurs mainly by copying sequence from a template located anywhere in the karyoplasm, and occurs in both male and female flies. This system, which was the first of its kind in metazoan organisms, is now being used for gene targeting in Drosophila. This review summarizes results that provide new insights into the process of gap repair in Drosophila and outline some recent experiments that demonstrate the power of the gene targeting technique.

Transposable element-host interactions: regulation of insertion and excision

Transposable elements propagate by inserting into new locations in the genomes of the hosts they inhabit. Their transposition might thus negatively affect the fitness of the host, suggesting the requirement for a tight control in the regulation of transposable element mobilization. The nature of this control depends on the structure of the transposable element. DNA elements encode a transposase that is necessary, and in most cases sufficient, for mobilization. In general, regulation of these elements depends on intrinsic factors with little direct input from the host. Retrotransposons require an RNA intermediate for transposition, and their frequency of mobilization is controlled at multiple steps by the host genome by regulating both their expression levels and their insertional specificity. As a result, a symbiotic relationship has developed between transposable elements and their host. Examples are now emerging showing that transposons can contribute significantly to the well being of the organisms they populate.

Germinal excisions of the maize transposon activator do not stimulate meiotic recombination or homology-dependent repair at the bz locus

Double-strand breaks have been implicated both in the initiation of meiotic recombination in yeast and as intermediates in the transposition process of nonreplicative transposons. Some transposons of this class, notably P of Drosophila and Tc1 of Caenorhabditis elegans, promote a form of homology-dependent premeiotic gene conversion upon excision. In this work, we have looked for evidence of an interaction between Ac transposition and meiotic recombination at the bz locus in maize. We find that the frequency of meiotic recombination between homologues is not enhanced by the presence of Ac in one of the bz heteroalleles and, conversely, that the presence of a homologous sequence in either trans (homologous chromosome) or cis (tandem duplication) does not promote conversion of the Ac insertion site. However, a tandem duplication of the bz locus may be destabilized by the insertion of Ac. We discuss possible reasons for the lack of interaction between Ac excision and homologous meiotic recombination in maize.

Homology requirements for targeting heterologous sequences during P-induced gap repair in Drosophila melanogaster

The effect of homology on gene targeting was studied in the context of P-element-induced double-strand breaks at the white locus of Drosophila melanogaster. Double-strand breaks were made by excision of P-w(hd), a P-element insertion in the white gene. A nested set of repair templates was generated that contained the 8 kilobase (kb) yellow gene embedded within varying amounts of white gene sequence. Repair with unlimited homology was also analyzed. Files were scored phenotypically for conversion of the yellow gene to the white locus. Targeting of the yellow gene was abolished when all of the 3' homology was removed. Increases in template homology up to 51 base pairs (bp) did not significantly promote targeting. Maximum conversion was observed with a construct containing 493 bp of homology, without a significant increase in frequency when homology extended to the tips of the chromosome. These results demonstrate that the homology requirements for targeting a large heterologous insertion are quite different than those for a point mutation. Furthermore, heterologous insertions strongly affect the homology requirements for the conversion of distal point mutations. Several aberrant conversion tracts, which arose from templates that contained reduced homology, also were examined and characterized.