mRNA transcription in nuclei isolated from Saccharomyces cerevisiae

Transcriptional termination signals for RNA polymerase II in fission yeast

Transcription 'run-on' (TRO) analysis using permeabilized yeast cells indicates that transcription terminates between 180 and 380 bp downstream of the poly(A) site of the Schizosaccharomyces pombe ura4 gene. Two signals direct RNA polymerase II (pol II) to stop transcription: the previously identified 3' end formation signals located close to the poly(A) site and an additional downstream element (DSE) located at the region of termination. The downstream signal (135 bp) appears to act by pausing the elongating polymerase. TRO analysis indicates that elevated levels of transcribing polymerases accumulate over the DSE and that removal of this signal leads to transcription proceeding beyond the normal termination region. Furthermore, when inserted between two competing polyadenylation signals, this DSE increases the utilization of upstream poly(A) sites in vivo. We show that polymerase pausing over an extended region of template ensures termination of pol II transcription close to the poly(A) site.

Nucleosomal location of the STE6 TATA box and Mat alpha 2p-mediated repression

It has been proposed that yeast MATa cell-specific genes are repressed in MAT alpha cells by the Mat alpha 2p repressor-directed placement of a nucleosome in a position that incorporates the TATA box of the MATa-specific gene close to the nucleosomal pseudodyad. In this study, we address this proposal directly with a series of plasmids designed to place the MATa-specific STE6 TATA box at different locations in a nucleosome and in the internucleosomal linker. These plasmids contain different lengths of synthetic random DNA between the Mat alpha 2p operator and the TATA box of the STE6 promoter, which is located upstream of a lacZ reporter gene in a multicopy plasmid. We show that in MAT alpha cells, a nucleosome is retained in an identical translational frame relative to the Mat alpha 2p operator in all the constructs investigated, irrespective of the sequence of the DNA wrapped onto the histone octamer. This result shows that the nucleosomal organization of the STE6 promoter in MAT alpha cells is not conferred by the sequence of the promoter itself. No expression of the lacZ reporter gene was detectable in MAT alpha cells in any of the constructs, even with the TATA box located in a short internucleosomal linker. These data indicate that repression of MATa-specific genes in MAT alpha cells does not require the precise translational placement of the TATA box close to the nucleosomal pseudodyad; the gene remains repressed when the TATA box is located within the investigated 250-bp region in the organized chromatin domain abutting the Mat alpha 2p operator in MAT alpha cells and may remain repressed with the TATA box located anywhere within this organized repression domain.

Nucleosomal location of the STE6 TATA box and Mat alpha 2p-mediated repression

It has been proposed that yeast MATa cell-specific genes are repressed in MAT alpha cells by the Mat alpha 2p repressor-directed placement of a nucleosome in a position that incorporates the TATA box of the MATa-specific gene close to the nucleosomal pseudodyad. In this study, we address this proposal directly with a series of plasmids designed to place the MATa-specific STE6 TATA box at different locations in a nucleosome and in the internucleosomal linker. These plasmids contain different lengths of synthetic random DNA between the Mat alpha 2p operator and the TATA box of the STE6 promoter, which is located upstream of a lacZ reporter gene in a multicopy plasmid. We show that in MAT alpha cells, a nucleosome is retained in an identical translational frame relative to the Mat alpha 2p operator in all the constructs investigated, irrespective of the sequence of the DNA wrapped onto the histone octamer. This result shows that the nucleosomal organization of the STE6 promoter in MAT alpha cells is not conferred by the sequence of the promoter itself. No expression of the lacZ reporter gene was detectable in MAT alpha cells in any of the constructs, even with the TATA box located in a short internucleosomal linker. These data indicate that repression of MATa-specific genes in MAT alpha cells does not require the precise translational placement of the TATA box close to the nucleosomal pseudodyad; the gene remains repressed when the TATA box is located within the investigated 250-bp region in the organized chromatin domain abutting the Mat alpha 2p operator in MAT alpha cells and may remain repressed with the TATA box located anywhere within this organized repression domain.

The yeast heat shock response is induced by conversion of cells to spheroplasts and by potent transcriptional inhibitors

We report here that procedures commonly used to measure transcription and mRNA decay rates in Saccharomyces cerevisiae induce the heat shock response. First, conversion of cells to spheroplasts with lyticase, a prerequisite for nuclear runoff transcription, induces the expression of HSP70 and HSP90 heat shock genes. The transcript levels of the non-heat-shock gene ACT1 are slightly depressed, consistent with the general yeast stress response. Second, the DNA intercalator, 1,10-phenanthroline, widely employed as a general transcriptional inhibitor in S. cerevisiae, enhances the mRNA abundance of certain heat shock genes (HSP82, SSA1-SSA2) although not of others (HSC82, SSA4, HSP26). Third, the antibiotic thiolutin, previously demonstrated to inhibit all three yeast RNA polymerases both in vivo and in vitro, increases the RNA levels of HSP82 5- to 10-fold, those of SSA4 greater than 25-fold, and those of HSP26 greater than 50-fold under conditions in which transcription of non-heat-shock genes is blocked. By using an episomal HSP82-lacZ fusion gene, we present evidence that lyticase and thiolutin induce heat shock gene expression at the level of transcription, whereas phenanthroline acts at a subsequent step, likely through message stabilization. We conclude that, because of the exquisite sensitivity of the yeast heat shock response, procedures designed to measure the rate of gene transcription or mRNA turnover can themselves impact upon each process.

Transcriptional activation in an improved whole-cell extract from Saccharomyces cerevisiae

We report an improved in vitro transcription system for Saccharomyces cerevisiae. Small changes in assay and whole-cell extraction procedures increase selective initiation by RNA polymerase II up to 60-fold over previous conditions (M. Woontner and J. A. Jaehning, J. Biol. Chem. 265:8979-8982, 1990), to levels comparable to those obtained with nuclear extracts. We have found that the simultaneous use of distinguishable templates with and without an upstream activation sequence is critical to the measurement of apparent activation. Transcription from any template was very sensitive to the concentrations of template and nontemplate DNA, extract, and activator (GAL4/VP16). Alterations in reaction conditions led to proportionately greater changes from a template lacking an upstream activation sequence; thus, the apparent ratio of activation is largely dependent on the level of basal transcription. Using optimal conditions for activation, we have also demonstrated activation by a bona fide yeast activator, heat shock transcription factor.

Transcriptional activation in an improved whole-cell extract from Saccharomyces cerevisiae

We report an improved in vitro transcription system for Saccharomyces cerevisiae. Small changes in assay and whole-cell extraction procedures increase selective initiation by RNA polymerase II up to 60-fold over previous conditions (M. Woontner and J. A. Jaehning, J. Biol. Chem. 265:8979-8982, 1990), to levels comparable to those obtained with nuclear extracts. We have found that the simultaneous use of distinguishable templates with and without an upstream activation sequence is critical to the measurement of apparent activation. Transcription from any template was very sensitive to the concentrations of template and nontemplate DNA, extract, and activator (GAL4/VP16). Alterations in reaction conditions led to proportionately greater changes from a template lacking an upstream activation sequence; thus, the apparent ratio of activation is largely dependent on the level of basal transcription. Using optimal conditions for activation, we have also demonstrated activation by a bona fide yeast activator, heat shock transcription factor.

Transcription factor requirements for in vitro formation of transcriptionally competent 5S rRNA gene chromatin

The Saccharomyces cerevisiae 5S rRNA gene was used as a model system to study the requirements for assembling transcriptionally active chromatin in vitro with purified components. When a plasmid containing yeast 5S rDNA was assembled into chromatin with purified core histones, the gene was inaccessible to the yeast class III gene transcription machinery. Preformation of a 5S rRNA gene-TFIIIA complex was not sufficient for the formation of active chromatin in this in vitro system. Instead, a complete transcription factor complex consisting of TFIIIA, TFIIIB, and TFIIIC needed to be formed before the addition of histones in order for the 5S chromatin to subsequently be transcribed by RNA polymerase III. Various 5S rRNA maxigenes were constructed and used for chromatin assembly studies. In vitro transcription from these assembled 5S maxigenes revealed that RNA polymerase III was readily able to transcribe through one, two, or four nucleosomes. However, we found that RNA polymerase III was not able to efficiently transcribe a chromatin template containing a more extended array of nucleosomes. In vivo expression experiments indicated that all in vitro-constructed maxigenes were transcriptionally competent. Analyses of protein-DNA interactions formed on these maxigenes in vivo by indirect end labeling indicated that there are extensive interactions throughout the length of these maxigenes. The patterns of protein-DNA interactions formed on these genes are consistent with these DNAs being assembled into extensive nucleosomal arrays.

Transcription factor requirements for in vitro formation of transcriptionally competent 5S rRNA gene chromatin

The Saccharomyces cerevisiae 5S rRNA gene was used as a model system to study the requirements for assembling transcriptionally active chromatin in vitro with purified components. When a plasmid containing yeast 5S rDNA was assembled into chromatin with purified core histones, the gene was inaccessible to the yeast class III gene transcription machinery. Preformation of a 5S rRNA gene-TFIIIA complex was not sufficient for the formation of active chromatin in this in vitro system. Instead, a complete transcription factor complex consisting of TFIIIA, TFIIIB, and TFIIIC needed to be formed before the addition of histones in order for the 5S chromatin to subsequently be transcribed by RNA polymerase III. Various 5S rRNA maxigenes were constructed and used for chromatin assembly studies. In vitro transcription from these assembled 5S maxigenes revealed that RNA polymerase III was readily able to transcribe through one, two, or four nucleosomes. However, we found that RNA polymerase III was not able to efficiently transcribe a chromatin template containing a more extended array of nucleosomes. In vivo expression experiments indicated that all in vitro-constructed maxigenes were transcriptionally competent. Analyses of protein-DNA interactions formed on these maxigenes in vivo by indirect end labeling indicated that there are extensive interactions throughout the length of these maxigenes. The patterns of protein-DNA interactions formed on these genes are consistent with these DNAs being assembled into extensive nucleosomal arrays.

Molecular cloning and regulatory analysis of the arylsulfatase structural gene of Neurospora crassa

The ars-1+ gene of Neurospora crassa encodes the enzyme arylsulfatase. ars-1+ is in a group of highly regulated sulfur-related structural genes that are expressed under conditions of sulfur limitation and are under coordinate control of the cys-3+ and scon+ regulatory genes. The ars-1+ gene was cloned by chromosome walking from the qa gene cluster, using a lambda library. Cotransformation of an N. crassa ars-1 mutant with the isolated lambda clones and the benomyl resistance gene, followed by assay for arylsulfatase activity, was used to screen for the ars-1+ gene. Further confirmation that the cloned segment mapped to the ars-1+ locus was obtained by restriction-fragment-length polymorphism analysis. Northern (RNA) blot analysis showed that the ars-1+ gene was transcribed to give an mRNA of 2.3 kilobases. In wild-type cells, the ars-1+ transcript was abundant under sulfur-derepressing conditions but absent under repressing conditions. Time course analysis showed that the appearance of ars-1+ message in sulfur-derepressed cultures paralleled the appearance of arylsulfatase enzyme activity. In addition, transcription of ars-1+ was detected only under derepressing conditions in a nuclear transcription assay. In a cys-3 regulatory mutant that was unable to synthesize arylsulfatase (or other sulfur-controlled enzymes), there was no ars-1+ transcript under repressing or derepressing conditions. In a temperature-sensitive cys-3 mutant, the ars-1+ transcript was present only at the permissive growth temperature and under sulfur derepression. A negative regulatory mutant, sconc, displayed both constitutive expression of arylsulfatase enzyme activity and content of ars-1+ message.

A region internal to the coding sequences is essential for transcription of the yeast Ty-D15 element

The major transcript of the yeast transposable element Ty1 has its 5' end in one delta and the 3' end in the opposite delta, the direct repeats of about 335 base pairs (bp) at each end of the element. The transcriptional initiation signals of the Ty-D15 element that give rise to this transcript were found to have a number of unusual characteristics. The 5' delta by itself, which contained the initiation site for Ty transcription, gave no detectable transcription. A region internal to the transcript in a translated part of the element and about 140 bp downstream of the 5' delta was essential for initiation of the major Ty transcript. This internal activating region (IAR) had several interesting properties. When the portion of the delta upstream of the initiation site was replaced with DNA fragments that did not by themselves act as promoters, initiation directed by the IAR still occurred at about the same position, 200 to 400 bp upstream of the IAR. If fragments containing the IAR were inverted, transcription could still occur. When 468 or 636 bp was inserted between the delta and the IAR, initiations occurred near the normal delta initiation site and in the inserted DNA. Therefore, the location and properties of transcription signals for Ty-D15 differ considerably from those expected for a yeast gene transcribed by RNA polymerase II.

Some of the signals for 3'-end formation in transcription of the Saccharomyces cerevisiae Ty-D15 element are immediately downstream of the initiation site

Fragments from the Ty-D15 element of Saccharomyces cerevisiae were assayed for the ability to direct 3'-end formation for RNA initiated by the GAL1 promoter. The delta, the direct repeat at each end of the element, was capable of forming 3' ends at two sites, an inefficient upstream site and an efficient downstream site near the end of the delta. Different sequences were required for 3'-end formation at these sites. For the efficient site, all transcripts had 3' ends in the delta and no downstream transcription was detected, which suggested that these sequences terminate transcription. Surprisingly, the delta region downstream of the initiation site for Ty RNA comprised part of this major site and terminated more than 50% of the transcripts that read into it. Sequences necessary for the efficient site were localized to two small regions. Both regions were upstream of the 3' end and contained similarities to a tripartite consensus sequence that has been proposed as a terminator element. Sequences near the position of the 3' end could also affect termination; a short G + C-rich sequence inserted just downstream changed an efficient terminator to an inefficient one. Initiation in the delta had no effect on the efficiency or positions or termination in that delta. A new initiation site was seen when the same delta terminated transcription, but transcriptional interference did not occur, since the amount of initiation was not decreased.

A region internal to the coding sequences is essential for transcription of the yeast Ty-D15 element

The major transcript of the yeast transposable element Ty1 has its 5' end in one delta and the 3' end in the opposite delta, the direct repeats of about 335 base pairs (bp) at each end of the element. The transcriptional initiation signals of the Ty-D15 element that give rise to this transcript were found to have a number of unusual characteristics. The 5' delta by itself, which contained the initiation site for Ty transcription, gave no detectable transcription. A region internal to the transcript in a translated part of the element and about 140 bp downstream of the 5' delta was essential for initiation of the major Ty transcript. This internal activating region (IAR) had several interesting properties. When the portion of the delta upstream of the initiation site was replaced with DNA fragments that did not by themselves act as promoters, initiation directed by the IAR still occurred at about the same position, 200 to 400 bp upstream of the IAR. If fragments containing the IAR were inverted, transcription could still occur. When 468 or 636 bp was inserted between the delta and the IAR, initiations occurred near the normal delta initiation site and in the inserted DNA. Therefore, the location and properties of transcription signals for Ty-D15 differ considerably from those expected for a yeast gene transcribed by RNA polymerase II.

Molecular cloning and regulatory analysis of the arylsulfatase structural gene of Neurospora crassa

The ars-1+ gene of Neurospora crassa encodes the enzyme arylsulfatase. ars-1+ is in a group of highly regulated sulfur-related structural genes that are expressed under conditions of sulfur limitation and are under coordinate control of the cys-3+ and scon+ regulatory genes. The ars-1+ gene was cloned by chromosome walking from the qa gene cluster, using a lambda library. Cotransformation of an N. crassa ars-1 mutant with the isolated lambda clones and the benomyl resistance gene, followed by assay for arylsulfatase activity, was used to screen for the ars-1+ gene. Further confirmation that the cloned segment mapped to the ars-1+ locus was obtained by restriction-fragment-length polymorphism analysis. Northern (RNA) blot analysis showed that the ars-1+ gene was transcribed to give an mRNA of 2.3 kilobases. In wild-type cells, the ars-1+ transcript was abundant under sulfur-derepressing conditions but absent under repressing conditions. Time course analysis showed that the appearance of ars-1+ message in sulfur-derepressed cultures paralleled the appearance of arylsulfatase enzyme activity. In addition, transcription of ars-1+ was detected only under derepressing conditions in a nuclear transcription assay. In a cys-3 regulatory mutant that was unable to synthesize arylsulfatase (or other sulfur-controlled enzymes), there was no ars-1+ transcript under repressing or derepressing conditions. In a temperature-sensitive cys-3 mutant, the ars-1+ transcript was present only at the permissive growth temperature and under sulfur derepression. A negative regulatory mutant, sconc, displayed both constitutive expression of arylsulfatase enzyme activity and content of ars-1+ message.

Some of the signals for 3'-end formation in transcription of the Saccharomyces cerevisiae Ty-D15 element are immediately downstream of the initiation site

Fragments from the Ty-D15 element of Saccharomyces cerevisiae were assayed for the ability to direct 3'-end formation for RNA initiated by the GAL1 promoter. The delta, the direct repeat at each end of the element, was capable of forming 3' ends at two sites, an inefficient upstream site and an efficient downstream site near the end of the delta. Different sequences were required for 3'-end formation at these sites. For the efficient site, all transcripts had 3' ends in the delta and no downstream transcription was detected, which suggested that these sequences terminate transcription. Surprisingly, the delta region downstream of the initiation site for Ty RNA comprised part of this major site and terminated more than 50% of the transcripts that read into it. Sequences necessary for the efficient site were localized to two small regions. Both regions were upstream of the 3' end and contained similarities to a tripartite consensus sequence that has been proposed as a terminator element. Sequences near the position of the 3' end could also affect termination; a short G + C-rich sequence inserted just downstream changed an efficient terminator to an inefficient one. Initiation in the delta had no effect on the efficiency or positions or termination in that delta. A new initiation site was seen when the same delta terminated transcription, but transcriptional interference did not occur, since the amount of initiation was not decreased.

Accurate initiation at RNA polymerase II promoters in extracts from Saccharomyces cerevisiae

A yeast nuclear extract supported transcription from the CYC1 and PYK1 promoters. Transcription was initiated in vitro at or near sites used in vivo. Deletion of "TATA" sequences abolished the reaction. alpha-Amanitin (10 micrograms/ml) and chloride (100 mM) were highly inhibitory.

Saccharomyces cerevisiae SPT3 gene is required for transposition and transpositional recombination of chromosomal Ty elements

Mutations in the Saccharomyces cerevisiae SPT3 gene have dramatic effects on the expression of Ty elements and genes adjacent to the element. The SPT3 gene is essential for Ty transposition, because transposition of chromosomal Ty elements ceased when the SPT3 gene was replaced with the frameshift mutation spt3-101. Presumably, the elimination of transposition was due to the effect of the SPT3 gene product on Ty transcription; the transcripts of chromosomal Ty elements were largely abolished in the spt3-101 strain (F. Winston, K. J. Durbin, and G. R. Fink, Cell 39:675-682, 1984). Ty transcription in an spt3-101 strain could be reestablished by introduction of the pGTyH3 plasmid, in which transcription of the Ty element TyH3 is under the control of the GAL1 promoter; these plasmid-derived Ty transcripts were SPT3-independent. Ty transposition resumed after galactose induction in spt3-101 strains containing the pGTyH3 plasmid. In spt3 mutants nearly all of the resulting transposition events derived from pGTyH3 plasmids and not from chromosomal elements.

Saccharomyces cerevisiae SPT3 gene is required for transposition and transpositional recombination of chromosomal Ty elements

Mutations in the Saccharomyces cerevisiae SPT3 gene have dramatic effects on the expression of Ty elements and genes adjacent to the element. The SPT3 gene is essential for Ty transposition, because transposition of chromosomal Ty elements ceased when the SPT3 gene was replaced with the frameshift mutation spt3-101. Presumably, the elimination of transposition was due to the effect of the SPT3 gene product on Ty transcription; the transcripts of chromosomal Ty elements were largely abolished in the spt3-101 strain (F. Winston, K. J. Durbin, and G. R. Fink, Cell 39:675-682, 1984). Ty transcription in an spt3-101 strain could be reestablished by introduction of the pGTyH3 plasmid, in which transcription of the Ty element TyH3 is under the control of the GAL1 promoter; these plasmid-derived Ty transcripts were SPT3-independent. Ty transposition resumed after galactose induction in spt3-101 strains containing the pGTyH3 plasmid. In spt3 mutants nearly all of the resulting transposition events derived from pGTyH3 plasmids and not from chromosomal elements.