Differential Antimicrobial Efficacy of Preservative-Free Contact Lens Disinfection Systems against Common Ocular Pathogens

Association Between Serratia marcescens Contamination and Hygiene Compliance in Orthokeratology

BACKGROUND/AIM

Given the characteristics of Serratia marcescens (S. marcescens), this study aimed at investigating its presence in the hands and contact lens cases of orthokeratology wearers, along with the status of bacterial contamination.

PATIENTS AND METHODS

The 39 patients received the questionnaires about the background of orthokeratology and hygiene habits. A total of 39 contact lens cases and 39 hand samples from the patients were collected at Show Chwan Memorial Hospital from June to August in 2020 and sent to National Chung Cheng University for DNA extraction and PCR identification.

RESULTS

The results indicated a detection rate of 5.13% for S. marcescens in the contact lens cases and 12.82% in the hand samples. Additionally, 66.67% of contact lens case samples and 30.77% of hand samples found positive for 16s bacterial amplicons. The relationship between hand contamination and the duration of contact lens usage were revealed for both S. marcescens (p=0.021) and 16s bacterial amplicons (p=0.048).

CONCLUSION

The results indicated that hand hygiene is more critical than focusing on contact lens hygiene when it comes to preventing S. marcescens infections. Nevertheless, both proper hand and contact lens hygiene practices can reduce the detection of bacterial eye pathogens, especially a common intestinal bacterium.

Advances in Contact Lens Care Solutions: PVP-I Disinfectant and HAD Wetting Agents From Japan

ABSTRACT

Half of the individuals who wear contact lenses use reusable lenses that require proper care. Improper contact lens (CL) care and using inadequate disinfecting solutions can lead to lens contamination, CL-related microbial keratitis, and Acanthamoeba keratitis. Oxidative disinfecting solutions, such as hydrogen peroxide, show higher efficacy than multipurpose solutions. Povidone-iodine (PVP-I), an oxidative disinfectant used in ophthalmic surgery, has been proven to be safe and effective. The PVP-I system, a CL disinfecting solution developed in Japan, has demonstrated excellent antimicrobial and antiviral properties. Although CL discomfort does not have a risk of ocular disorders with poor visual prognosis, such as keratitis, CL discomfort can still lead to lens dropout and thus needs to be addressed. To mitigate CL discomfort, it is essential to use disinfecting solutions containing surfactants and wetting agents that improve wettability of the lens surface. A CL solution containing hyaluronic acid derivatives (HADs) as wetting agents that permanently adhere to the lens surface to improve wettability of the lens surface was developed in Japan. There is potential for HAD to be integrated into various solutions. This article reviews the efficacy of novel PVP-I-based disinfecting solution and HAD wetting agents.

Comparative Evaluation of Pseudomonas aeruginosa Adhesion to a Poly-(2-Methacryloyloxyethyl Phosphorylcholine)-Modified Silicone Hydrogel Contact Lens

Pseudomonas aeruginosa is the most common causative agent associated with microbial keratitis. During contact lens wear, pathogens may be introduced into the ocular environment, which might cause adverse events. Lehfilcon A is a recently developed contact lens with a water gradient surface composed of polymeric 2-methacryloyloxyethyl phosphorylcholine (MPC). MPC is re-ported to impart anti-biofouling properties onto modified substrates. Therefore, in this in vitro experimental study, we tested the capability of lehfilcon A to resist adhesion by P. aeruginosa. Quantitative bacterial adhesion assays using five strains of P. aeruginosa were conducted to compare the adherence properties of lehfilcon A to five currently marketed silicone hydrogel (SiHy) contact lenses (comfilcon A, fanfilcon A, senofilcon A, senofilcon C, and samfilcon A). Compared to lehfilcon A, we observed 26.7 ± 8.8 times (p = 0.0028) more P. aeruginosa binding to comfilcon A, 30.0 ± 10.8 times (p = 0.0038) more binding to fanfilcon A, 18.2 ± 6.2 times (p = 0.0034) more binding to senofilcon A, 13.6 ± 3.9 times (p = 0.0019) more binding to senofilcon C, and 29.5 ± 11.8 times (p = 0.0057) more binding to samfilcon A. These results demonstrate that, for various strains of P. aeruginosa, lehfilcon A reduces bacterial adhesion compared to other contact lens materials.

Complete Recovery of Acanthamoeba Motility among Surviving Organisms after Contact Lens Care Disinfection

Acanthamoeba keratitis is a sight-threatening infection of the cornea which is extremely challenging to treat. Understanding this organism's responses during contact lens contact and disinfection could enhance our understanding of how Acanthamoebae colonize contact lens cases, better inform us on contact lens care solution (CLC) efficacy, and help us better understand the efficacy required of CLC products. To explore this gap in knowledge, we used Acanthamoeba ATCC 30461 and ATCC 50370 trophozoites to examine Acanthamoeba behavior during and after CLC disinfection. Amoebae were added to sterile aluminum flow cells and flow cell solutions were changed to Ringer's solution (control), or one of four CLCs based on biocides (PHMB, PAPB/Polyquad, Polyquad/Aldox, or Polyquad/Alexidine) for 6 h. Each flow cell solution was then changed to axenic culture media (AC6) for 12 h to determine the behavior of amoebae following disinfection. Distance, speed, and displacement were calculated for each organism. As compared to the control of one-quarter Ringer's solution, each CLC significantly impacted Acanthamoeba motility in both the CLC and AC6 conditions. However, the amoebae challenged with the PHMB CLC traveled a significantly greater total distance than with the other three CLCs, indicating differences in effectiveness between biocides. Furthermore, amoebae regaining motility post-disinfection by CLCs were observed to travel considerable distances and thus could be considered dangerous to ocular health. We determined that while all CLCs produced a substantial or complete cessation of movement vs. the control condition during disinfection, those which relied on the Polyquad biocides were the most effective, and that any amoebae which survived disinfection were able to recover motility. Future examinations of these findings should include direct correlations between motility and viability, and how infectivity and motility may be related.

Acanthamoeba spp. aggregate and encyst on contact lens material increasing resistance to disinfection

Introduction

Acanthamoeba keratitis is often caused when Acanthamoeba contaminate contact lenses and infect the cornea. Acanthamoeba is pervasive in the environment as a motile, foraging trophozoite or biocide-resistant and persistent cyst. As contact lens contamination is a potential first step in infection, we studied Acanthamoeba's behavior and interactions on different contact lens materials. We hypothesized that contact lenses may induce aggregation, which is a precursor to encystment, and that aggregated encystment would be more difficult to disinfect than motile trophozoites.

Methods

Six clinically and/or scientifically relevant strains of Acanthamoeba (ATCC 30010, ATCC 30461, ATCC 50370, ATCC 50702, ATCC 50703, and ATCC PRA-115) were investigated on seven different common silicone hydrogel contact lenses, and a no-lens control, for aggregation and encystment for 72 h. Cell count and size were used to determine aggregation, and fluorescent staining was used to understand encystment. RNA seq was performed to describe the genome of Acanthamoeba which was individually motile or aggregated on different lens materials. Disinfection efficacy using three common multi-purpose solutions was calculated to describe the potential disinfection resistance of trophozoites, individual cysts, or spheroids.

Results

Acanthamoeba trophozoites of all strains examined demonstrated significantly more aggregation on specific contact lens materials than others, or the no-lens control. Fluorescent staining demonstrated encystment in as little as 4 hours on contact lens materials, which is substantially faster than previously reported in natural or laboratory settings. Gene expression profiles corroborated encystment, with significantly differentially expressed pathways involving actin arrangement and membrane complexes. High disinfection resistance of cysts and spheroids with multi-purpose solutions was observed.

Discussion

Aggregation/encystment is a protective mechanism which may enable Acanthamoeba to be more disinfection resistant than individual trophozoites. This study demonstrates that some contact lens materials promote Acanthamoeba aggregation and encystment, and Acanthamoeba spheroids obstruct multi-purpose solutions from disinfecting Acanthamoeba.

The Activity of PHMB and Other Guanidino Containing Compounds against Acanthamoeba and Other Ocular Pathogens

In recent years, a rise in the number of contact lens users in the UK and worldwide coincided with an increased incidence of microbial keratitis. The aim of this study was to investigate the antimicrobial activities of polyhexamethylene guanidine (PHMG), polyaminopropyl biguanide (PAPB), and guazatine in comparison to the common contact lens disinfectant constituent, polyhexamethylene biguanide (PHMB). The study investigated these compounds against a broad range of organisms, including Acanthamoeba castellanii, Acanthamoeba polyphaga, Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. This study demonstrated that PHMG, PAPB, and guazatine are equal in activity to PHMB against Acanthamoeba trophozoites and cysts. PHMG and PAPB are also equal in activity to PHMB against S. aureus and P. aeruginosa, whereas PHMG shows significantly better activity than PHMB against C. albicans (p < 0.001). To our knowledge, this is the first study to demonstrate the effectiveness of PHMB, PHMG, PAPB, and guazatine against Acanthamoeba and other ocular pathogens. As alternatives to PHMB, these compounds warrant further investigation for inclusion in contact lens solutions and for the treatment of keratitis.