A Non-Destructive, Tuneable Method to Isolate Live Cells for High-Speed AFM Analysis

Suitable immobilisation of microorganisms and single cells is key for high-resolution topographical imaging and study of mechanical properties with atomic force microscopy (AFM) under physiologically relevant conditions. Sample preparation techniques must be able to withstand the forces exerted by the Z range-limited cantilever tip, and not negatively affect the sample surface for data acquisition. Here, we describe an inherently flexible methodology, utilising the high-resolution three-dimensional based printing technique of multiphoton polymerisation to rapidly generate bespoke arrays for cellular AFM analysis. As an example, we present data collected from live Emiliania huxleyi cells, unicellular microalgae, imaged by contact mode High-Speed Atomic Force Microscopy (HS-AFM), including one cell that was imaged continuously for over 90 min.

Probing the surface ultrastructure of Brevibacillus laterosporus using atomic force microscopy

One of the main obstacles to studying the surface ultrastructure of microbial cells by atomic force microscopy (AFM) is determining how to immobilize live cells on the AFM substrates. Each method has its own advantages and disadvantages. The aim of this study was to characterize a new simple and inexpensive method using two types of polyethersulfone (PES) membrane filters that differ in pore size (micropore and nanopore) to immobilize live and dead Brevibacillus laterosporus for AFM imaging. B. laterosporus was easily trapped by the microporous PES membrane, facilitating the successful AFM scanning of the bacterial surface ultrastructure. In addition, B. laterosporus strongly attached to the nanoporous membranes and withstood the pulling forces exerted by the AFM tip during scanning. These methods of immobilization did not affect the cell viability. The nanostructure and roughness of the bacterial surface were also observed for live, fixed, and air-dried cells. Live and dead bacteria displayed similar morphologies at low resolution, while at high resolution, live bacteria displayed a more convoluted surface ("brain-like structure").

A concise review of nanoscopic aspects of bioleaching bacteria-mineral interactions

Bioleaching is a technology for the recovery of metals from minerals by means of microorganisms, which accelerate the oxidative dissolution of the mineral by regenerating ferric ions. Bioleaching processes take place at the interface of bacteria, sulfide mineral and leaching solution. The fundamental forces between a bioleaching bacterium and mineral surface are central to understanding the intricacies of interfacial phenomena, such as bacterial adhesion or detachment from minerals and the mineral dissolution. This review focuses on the current state of knowledge in the colloidal aspect of bacteria-mineral interactions, particularly for bioleaching bacteria. Special consideration is given to the microscopic structure of bacterial cells and the atomic force microscopy technique used in the quantification of fundamental interaction forces at nanoscale.

Surface roughness mediated adhesion forces between borosilicate glass and gram-positive bacteria

It is well-known that a number of surface characteristics affect the extent of adhesion between two adjacent materials. One of such parameters is the surface roughness as surface asperities at the nanoscale level govern the overall adhesive forces. For example, the extent of bacterial adhesion is determined by the surface topography; also, once a bacteria colonizes a surface, proliferation of that species will take place and a biofilm may form, increasing the resistance of bacterial cells to removal. In this study, borosilicate glass was employed with varying surface roughness and coated with bovine serum albumin (BSA) in order to replicate the protein layer that covers orthopedic devices on implantation. As roughness is a scale-dependent process, relevant scan areas were analyzed using atomic force microscope (AFM) to determine Ra; furthermore, appropriate bacterial species were attached to the tip to measure the adhesion forces between cells and substrates. The bacterial species chosen (Staphylococci and Streptococci) are common pathogens associated with a number of implant related infections that are detrimental to the biomedical devices and patients. Correlation between adhesion forces and surface roughness (Ra) was generally better when the surface roughness was measured through scanned areas with size (2 × 2 μm) comparable to bacteria cells. Furthermore, the BSA coating altered the surface roughness without correlation with the initial values of such parameter; therefore, better correlations were found between adhesion forces and BSA-coated surfaces when actual surface roughness was used instead of the initial (nominal) values. It was also found that BSA induced a more hydrophilic and electron donor characteristic to the surfaces; in agreement with increasing adhesion forces of hydrophilic bacteria (as determined through microbial adhesion to solvents test) on BSA-coated substrates.