Insights into the efficient ozonation process focusing on 2,4-di-tert-butylphenol - A notable micropollutant of typical bamboo papermaking wastewater: Performance and mechanism

The present study applied the ozonation process to degrade 2,4-di-tert-butylphenol (2,4-DTBP), an emerging micropollutant detected in typical bamboo pulp and papermaking wastewater (BPPW). The effects of various influencing factors on the degradation performance and corresponding degradation mechanism were investigated. The results showed that ozone could degrade 2,4-DTBP rapidly with a reaction rate constant of (1.80 ± 0.05) × 10⁵ M^-1·s^-1. The removal efficiency of 2,4-DTBP (5 mg/L) could reach 100% when the ozone dosage exceed 6 mg/L in a neutral medium. The presence of coexisting chemicals in BPPW such as Cl^- and HCO₃^- promoted the removal performance of 2,4-DTBP. In contrast, NH₄⁺ and humic acid presented inhibition on 2,4-DTBP removal. The ozonation of 2,4-DTBP was dominated by the ozone molecule, and this was primarily attributed to electrophilic substitution and 1,3-dipolar cycloaddition reactions. Twenty-seven kinds of intermediate products were identified by UPLC-Q-TOF/MS. The variations in their productions were based on the changes in ozone dosage. The degradation pathways were proposed. The toxicity of 2,4-DTBP was weakened after ozonation. As for the ozonation of actual biochemical effluent of BPPW, the desirable treatment performance was obtained. This study proved the feasibility of ozonation and provided data basis for subsequent pilot study.

Degradation of Bisphenol A by ozonation in rotating packed bed: Effects of operational parameters and co-existing chemicals

Bisphenol A (BPA), a typical endocrine disrupting chemical, widely exists in water and threatens human health. The degradation of BPA by ozone in water is limited by the gas-mass transfer due to the low solubility of ozone. In this study, a rotating packed bed (RPB) was employed to create a high gravity environment to intensify the ozone mass transfer and BPA degradation. The effects of operational parameters (rotation speed of RPB, pH of the solution, ozone concentration, BPA concentration, gas volumetric flow rate and liquid volumetric flow rate) on BPA degradation efficiency and overall volumetric mass transfer coefficient of ozone were investigated. The results show that RPB effectively promoted the ozone mass transfer and BPA degradation and can be used for the ozonation of micropollutants that have fast reaction rates with ozone. Quenching experiments suggest that both ozone and HO∙ participated in BPA degradation from acidic to alkaline environments. In addition, the effects of co-existing chemicals on BPA degradation efficiency were studied. The addition of H₂O₂ or Cl^- had no obvious impact on BPA degradation; the addition of HCO₃^- is beneficial for BPA degradation while the addition of fulvic acid suppressed the degradation. These results indicate that the pH value, which affects the reaction rate between ozone and BPA, is a major factor to be considered during the ozonation of BPA in RPB.